12:30
|
--- Poster Session Lunch (12:30 - 1:00 p.m.) ---
|
13:00
|
C2PoK - GM, VMPT, Stirling and JT Coolers (Non-Aerospace)
-Prof.
Zhihua Gan
(Zhejiang University) Dr
Chao Wang
(Cryomech, Inc.)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Characteristics of a 1.6 W Gifford-McMahon cryocooler with a double pipe regenerator
- Prof.
Shinji Masuyama
(NIT, Oshima College)
(Exhibit Hall AB)
|
13:00
|
Comparative Analysis of Linear motor geometry for a Stirling Cryocooler
- Dr
Biju T Kuzhiveli
(NIT Calicut)
(Exhibit Hall AB)
|
13:00
|
Cooling Down Time Optimization of the stirling cooler
- Dr
Ming Xia
(Kunming Institute of Physics)
(Exhibit Hall AB)
|
13:00
|
Experimental progress of a 4K VM/PT hybrid cryocooler for pre-cooling 1K sorption cooler
- Dr
Changzhao Pan
(Technical Institute of Physics and Chemistry, CAS)
(Exhibit Hall AB)
|
13:00
|
Liquid nitrogen cooling test with linear driven Stirling cryocooler
- Dr
Junseok Ko
(Korea Institute of Machinery & Materials)
(Exhibit Hall AB)
|
13:00
|
Mixture Optimization for Mixed Gas Joule-Thomson Cycle
- Ms
Jennifer Detlor
(Solar Energy Laboratory)
(Exhibit Hall AB)
|
13:00
|
Modelling of a stirling cryocooler regenerator under steady and steady - periodic flow conditions using a correlation based method
- Dr
Biju T Kuzhiveli
(Centre for Advanced Studies in Cryogenics (CASC), Department of Mechanical Engineering, National Institute of Technology Calicut, India ,673601)
(Exhibit Hall AB)
|
13:00
|
Numerical Study of a Cryogen-free Vuilleumier Type Pulse Tube Cryocooler Operating below 10 K
- Prof.
Wei Dai
(Exhibit Hall AB)
|
13:00
|
Numerical study of a novel coupled VM-PTC cryocooler with He3 as working fluid by Sage
- Dr
Changzhao Pan
(Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China)
(Exhibit Hall AB)
|
13:00
|
Numerical study of a VM type multi-bypass pulse tube cryocooler operating at 4K
- Dr
Changzhao Pan
(CAS Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)
(Exhibit Hall AB)
|
13:00
|
Performance estimation of an oil-less linear compressor unit for a new compact 2K Gifford-McMahon cryocooler
- Dr
YOSHIKATSU HIRATSUKA
(Sumitomo Heavy Industries, Ltd.)
(Exhibit Hall AB)
|
13:00
|
Thermodynamic analysis and comparison of single-stage mixed-refrigerant Joule–Thomson cycle and reverse Brayton cycle for cooling 80 ~ 120 K temperature-distributed heat loads
-
Haocheng Wang
(Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
(Exhibit Hall AB)
|
13:00
|
C2PoL - Large Scale Simulation
-
Lars Blum
(Linde Kryotechnik AG) Dr
Anindya Chakravarty
(Bhabha Atomic Research Centre, India & FNAL)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
CFD studied on heat transfer and pressure drop characteristics of an offset strip-fin heat exchanger in helium systems.
- Prof.
Jihao Wu
( Technical Institute of Physics and Chemistry Chinese Academy of Sciences, Beijing 100190,China) Prof.
Qing Li
(Technical Institute of Physics and Chemistry Chinese Academy of Sciences, Beijing 100190,China)
(Exhibit Hall AB)
|
13:00
|
Development of a Dynamic Simulator for a 250 W@4.5 K Helium Refrigerator
- Dr
Lianyou Xiong
(Technical Institute of Physics and Chemistry, CAS) Prof.
Liqiang Liu
(Technical Institute of Physics and Chemistry)
(Exhibit Hall AB)
|
13:00
|
Entransy dissipation based-thermal resistance and exergy analysis on helium liquefier
- Mr
Lianyou Xiong
(Exhibit Hall AB)
|
13:00
|
Process Simulation for the LCLS-II Cryogenic Systems
- Dr
Viswanath Ravindranath
(SLAC National Accelerator Laboratory)
(Exhibit Hall AB)
|
13:00
|
Study of dynamic process of a large-scale helium refrigerator
- Ms
Wei Pan
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
(Exhibit Hall AB)
|
13:00
|
The Numerical Simulation and Experimental Comparison of Separator Cooling Systme for Helium
- Mr
Wun-Rong Liao
(National Synchrotron Radiation Research Center)
(Exhibit Hall AB)
|
13:00
|
Thermal-Mechanical Analysis on the Refrigerator Cold Box of the CFETR Coil Test Facility
- Mr
Xiaogang Liu
(Institute of Plasma Physics, Chinese Academy of Sciences)
(Exhibit Hall AB)
|
13:00
|
Thermodynamic analysis and economical evaluation of two 300-80 K precooling stage configurations for helium refrigeration and liquefaction cycle
-
Qingfeng Jiang
(Institute of Plasma Physics, Chinese Academy of Sciences and University of Science and Technology of China)
(Exhibit Hall AB)
|
13:00
|
C2PoM - Superconducting Magnet Systems - HTS
-
Wolfgang Stautner
(GE Global Research)
Michael Green
(LBNL)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Development of an Algorithm for Fault Recovery Time of Resistive Type Superconducting Fault Current Limiter used in SMES Applications
-
Abhinav Kumar
(Lovely Professional University, Phagwara)
(Exhibit Hall AB)
|
13:00
|
Development of the HTS magnet system for Lorentz Force Velocimetry
- Mr
Oleksii Vakaliuk
(Technische Universität Ilmenau, Institute of Materials Engineering, Department of Inorganic-Nonmetallic Materials, Group of Materials research in or with Magnetic Fields)
(Exhibit Hall AB)
|
13:00
|
Modeling studies of cryogen free MRI magnets based on MgB2 and Nb3Sn superconductors
-
Milan Majoros
(The Ohio State University)
(Exhibit Hall AB)
|
13:00
|
Quench Detection and Protection of an HTS Coil
-
Owen Christianson
(NDI)
(Exhibit Hall AB)
|
13:00
|
M2PoA - Materials I: Physical Properties
-
David Evans
(Advanced Cryogenic Materials Ltd.) Prof.
Karl Hartwig
(Texas A&M University)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Competition between the significant scale lengths influing on the transport phenomena at very low temperature in InP semiconductor
- Prof.
ABDELHAMID EL KAAOUACHI
(aFaculty of Sciences IbnZohr of Agadir, Physics department, BP 8106 8000 Agadir, Morocco)
(Exhibit Hall AB)
|
13:00
|
Cryogenic electrical property of Cyanate ester/epoxy insulation material for fusion superconducting magnet
- Mr
Xu Li
(Technical Institute of Physics and Chemistry, CAS)
(Exhibit Hall AB)
|
13:00
|
In-depth characterization of low temperature high voltage axial insulator breaks for the ITER cryogenic supply line
-
Stefano Sgobba
(CERN)
(Exhibit Hall AB)
|
13:00
|
Low Temperature Electrical Transport Studies on Fe Doped (110)-Oriented PrBa2Cu3O7 Thin Films.
- Dr
Hom Kandel
(University of Wisconsin-Parkside)
(Exhibit Hall AB)
|
13:00
|
Prediction of critical current by artificial neural network of nano structured superconducting film
- Dr
Kamran Muhammad
(COMSATS Institute of IT)
(Exhibit Hall AB)
|
13:00
|
The construction of the 1.8K high voltage electrical breakdown measuring system with GM cryocooler
- Prof.
Rongjin Huang
(Technical Institute of Physics and Chemistry)
(Exhibit Hall AB)
|
13:00
|
Thermal expansion and magnetostriction measurements at cryogenic temperature using the strain gage method
- Mr
Wei Wang
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
(Exhibit Hall AB)
|
13:00
|
Variable Range Hopping conduction in the insulating samples 70Ge: Ga p-type semiconductor at very low temperature
- Prof.
Abdelhamid El kaaouachi
(University Ibn Zorh Faculty of Sciences, Agadir, Morocco)
(Exhibit Hall AB)
|
13:00
|
M2PoB - Materials II: Mechanical Properties, Metals and Non-Metals
-
Eric Hellstrom
(ASC / NHMFL / FSU)
Robert Walsh
(NHMFL / FSU)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Comparison of cryorolling impacts on properties of 316LN stainless steel and non-oriented electrical steel
- Mrs
Alica Fedorikova
(Technical University of Kosice)
(Exhibit Hall AB)
|
13:00
|
Epoxy Tensile Testing at Cryogenic Temperatures
-
Wesley Johnson
(NASA Glenn Research Center)
(Exhibit Hall AB)
|
13:00
|
Evaluation of the cryogenic mechanical properties of the insulation material for ITER Feeder superconducting joint
-
Chuanjun HUANG
(Technical Institute of Physics and Chemistry, Chinese Academy o) Mr
Rongjin Huang
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
Zhixiong Wu
(TIPC, CAS)
(Exhibit Hall AB)
|
13:00
|
Experimental and numerical investigation on residual stress relaxation of 7050 aluminum alloy by cryogenic treatment
- Mr
Zheng Jianpeng
(The Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences (TIPCCAS)) Prof.
Wang Junjie
(The Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences (TIPCCAS))
(Exhibit Hall AB)
|
13:00
|
Fatigue and Fracture of Three Austenitic Stainless Steels at Cryogenic Temperatures
-
Dustin McRae
(National High Magnetic Field Laboratory)
(Exhibit Hall AB)
|
13:00
|
Mechanical properties of AA2219-T8 at low temperatures
- Dr
Huang Chuanjun
(State Key Laboratory of Technologies in Space Cryogenic Propellants, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, PR China)
(Exhibit Hall AB)
|
13:00
|
Niobium tube for superconducting RF cavities
- Prof.
Karl Hartwig
(Texs A&M University)
(Exhibit Hall AB)
|
13:00
|
Properties and recrystallization behavior of copper
- Mr
Jason Springs
(Texas A&M University)
(Exhibit Hall AB)
|
13:00
|
M2PoC - Focused Session: Latest Development in Flux Pinning I: Flux Pinning, Critical Currents
-Dr
Judy Wu
(University of Kansas)
Teresa Puig
(CSIC)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Characterization of YBa2Cu3O7 thin films on miscut LSAT substrates
- Ms
Pegah Mirabedini
(UC Riverside)
(Exhibit Hall AB)
|
13:00
|
Comparison Study of the Flux Pinning Enhancement of YBCO Superconductor with BZO and BZO + Y2O3 Mixed Phase Additions
- Mrs
Mary Ann Sebastian
(AFRL / RQQM)
(Exhibit Hall AB)
|
13:00
|
Continuous transport and magnetization measurements on production coated conductors
- Mr
Xinbo Hu
(ASC, NHMFL, FSU)
(Exhibit Hall AB)
|
13:00
|
Effect of Y2O3 pinning on the magnetic properties of Y123 superconductor
- Mr
Chengchao Jin
(Shanghai Jiao Tong University)
(Exhibit Hall AB)
|
13:00
|
Promoting BaZrO3 nanorods splay strong and isotropic pinning in BaZrO3-Y2O3 double-doped YBCO thin films
- Mr
Shihong Chen
(The University of Kansas)
(Exhibit Hall AB)
|
13:00
|
Y2O3-doped YBCO Thin Films Prepared by Polymer-Assisted Fluorine-Free Metal Organic Deposition
-
Chengchao Jin
(Shanghai Jiao Tong University)
(Exhibit Hall AB)
|
13:00
|
M2PoD - BSCCO Wires and Tapes I: Processing & Properties
-
Hanping Miao
(Bruker OST)
David Smathers
(H. C. Starck, Inc.)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Effect of sheath material and reaction overpressure on Ag extrusions into the TiO2 insulation coating of Bi-2212 round wire
-
Imam Hossain
(National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida, FL 32310, USA)
(Exhibit Hall AB)
|
13:00
|
Filament Damage in Bi2Sr2CaCu2O8-x (Bi-2212) Superconducting Wires as Revealed by External Etching
-
Jordan Egner-Schnitzler
(Materials Science and Engineering Center, University of Wisconsin-Eau Claire)
(Exhibit Hall AB)
|
13:00
|
Microstructure and superconducting properties of Bi,Pb-2223 thin films fabricated from alternately layered Bi,Pb-2212/Pb-Ca-Cu-O thin films
-
Akiyoshi MATSUMOTO
(NIMS)
(Exhibit Hall AB)
|
13:00
|
Strong, high Je Bi2212 round wire
- Dr
Alexander Otto
(Solid Material Solutions, LLC)
(Exhibit Hall AB)
|
13:00
|
M2PoE - HTS and MgB2 Bulk II
-
Rod Badcock
(Robinson Research Institute, Victoria University of Wellington) Dr
John Hull
(Boeing Research & Technology)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
Growth rate of YBCO-Ag single grains grown by liquid-phase enriched top seeded melt growth
- Ms
Jasmin Congreve
(University of Cambridge)
(Exhibit Hall AB)
|
13:00
|
Oxygen doping in MgB2 thin film and bulk samples
-
Danlu Zhang
(The Ohio State University)
(Exhibit Hall AB)
|
13:00
|
M2PoF - Superconductors II: Fundamental, New Materials
-
Takanobu Kiss
(Kyushu University)
Rod Badcock
(Robinson Research Institute, Victoria University of Wellington)
(until 15:00)
(Exhibit Hall AB)
|
13:00
|
An Investigation of the Superconducting Properties of the beta-Mn (T1-xRx)3Al2C solid solutions
-
Michael Susner
(Air Force Research Laboratory)
(Exhibit Hall AB)
|
13:00
|
Ferromagnetism and superconducting-like behavior in carbon allotropes
-
Nadina Gheorghiu
(Exhibit Hall AB)
|
13:00
|
Growth of FeSe single crystals and fundamental characterization of doping and intercalation
-
Michael Susner
(Air Force Research Laboratory)
(Exhibit Hall AB)
|
13:00
|
Signatures of excitonic and superconducting oscillations: Metal-insulator and insulator-metal transitions in thin carbon films and graphitic samples
-
Nadina Gheorghiu
(Exhibit Hall AB)
|
13:00
|
Single Crystal Growth and Doping of Possible Cr analogues to Fe-based Superconductors
-
Michael Susner
(Air Force Research Laboratory)
(Exhibit Hall AB)
|
15:00
|
C2OrD - Large Scale Refrigeration and Liquefaction III
-
Brian DeGraff
(ORNL) Mr
Laurent Tavian
(CERN)
(until 17:00)
(Madison Ballroom AD)
|
15:00
|
[Invited] Novel concept of 60-120 kW refrigerator - Part 2: 4-80K box
-
Sergiy Putselyk
(Madison Ballroom AD)
|
15:30
|
Towards the conceptual design of the cryogenic system of the Future Circular Collider (FCC)
- Mr
Laurent Tavian
(CERN)
(Madison Ballroom AD)
|
15:45
|
Main improvements of LHC Cryogenics Operation during Run 2 (2015-2018)
- Mr
Laurent Delprat
(CERN)
(Madison Ballroom AD)
|
16:00
|
Refrigeration assessment of the existing cryogenic plants for the high luminosity upgrade of the Large Hadron Collider (LHC)
-
Daniel Alexander Berkowitz Zamora
(CERN)
(Madison Ballroom AD)
|
16:15
|
Commissioning and first cooldown of XFEL linac
- Dr
Bernd Petersen
(DESY)
(Madison Ballroom AD)
|
16:30
|
First operation of the XFEL linac with the 2K cryogenic system
- Dr
Tobias Schnautz
(DESY)
(Madison Ballroom AD)
|
15:00
|
C2OrE - Instrumentation, Visualization, and Controls II - sponsored by Scientific Instruments Inc.
-
Michael Capers
(Cryocomp)
Steven Van Sciver
(NHMFL/FSU)
(until 17:00)
(Madison Ballroom BC)
|
15:00
|
Effects of High Level Gamma Radiation Doses on Cernox(TM) Cryogenic Temperature Sensors
-
Scott Courts
(Lake Shore Cryotronics, Inc.)
(Madison Ballroom BC)
|
15:15
|
Experimental validation of a self-calibrating cryogenic mass flowmeter
- Mr
Andreas Janzen
(Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)
(Madison Ballroom BC)
|
15:30
|
Transition Edge Sensors for Quench Localization in SRF Cavity Tests
-
Torsten Koettig
(CERN)
(Madison Ballroom BC)
|
15:45
|
Overview of process control strategies for typical helium cryogenic warm compression stations at CERN
- Dr
Marco Pezzetti
(CERN)
(Madison Ballroom BC)
|
16:00
|
Comparison of cryogenic process control strategies using simulation software and applied to a superconducting magnet test bench at CERN.
-
Marco Pezzetti
(CERN)
(Madison Ballroom BC)
|
16:15
|
Visualization of grid-generated turbulence in He II using PTV
-
Brian Mastracci
(Florida State University, National High Magnetic Field Laboratory)
(Madison Ballroom BC)
|
16:30
|
Cryogenic test facility instrumentation with fiber optic and fiber optic sensors for testing superconducting accelerator magnets
- Dr
Antonella Chiuchiolo
(CERN)
(Madison Ballroom BC)
|
16:45
|
Coolant-free Cryogenic Mechanical Property Test System with Optical Windows
- Dr
Zhang Hengcheng
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
(Madison Ballroom BC)
|
15:00
|
C2OrF - Helium and Oxygen Fluid Mechanics and Heat Transfer
-
Ho-Myung Chang
(Hong Ik University)
Jacob Leachman
(Washington State University)
(until 16:45)
(Hall of Ideas FI)
|
15:00
|
3D CFD Transient numerical simulation of superfluid Helium
-
Romain Bruce
(CEA Saclay)
(Hall of Ideas FI)
|
15:30
|
Numerical analysis of free convection in cold helium vapor flows in a long sloped pipe
- Dr
Slawomir Pietrowicz
(Wroclaw University of Technology)
Jaroslaw Fydrych
(European Spallation Source ERIC)
(Hall of Ideas FI)
|
15:45
|
Equivalent Isentropic Expansion Efficiency of Real Fluid Subject to Concurrent Pressure Drop and Heat Transfer
- Dr
Peter Knudsen
(Facility for Rare Isotope Beams - Michigan State University)
(Hall of Ideas FI)
|
16:00
|
Simulation on bubble shape and dynamics in liquid oxygen under magnetic field
- Ms
Ruiping Zhang
(Institute of Cryogenics and Refrigeration)
(Hall of Ideas FI)
|
16:15
|
Lumped Multi-Bubble Analysis of Injection Cooling System for Storage of Cryogenic Liquids
- Mr
Pritam Saha
(Indian Institute of Technology Kharagpur)
(Hall of Ideas FI)
|
15:00
|
M2OrE - Focused Symposia - Propulsion VII: Wires & Cables
-
Arend Nijhuis
(University of Twente) Dr
Wilfried Goldacker
(Karlsruhe Institute of Technology / ITEP)
(until 17:00)
(Lecture Hall)
|
15:00
|
[Invited] High in-field Ic and Low AC-loss with Low Cost Coated Conductors for Electric Propulsion Transportation in Japan
-
Teruo Izumi
(Advanced Industrial Science and Technology)
(Lecture Hall)
|
15:30
|
[Invited] Targeted high-temperature superconductor wire characterization and selection for electric propulsion applications
-
Stuart Wimbush
(Victoria University of Wellington)
(Lecture Hall)
|
16:00
|
[Invited] Development of 22kV HTS Triaxial superconducting bus
- Mr
Nobuhiro Mido
(SWCC SHOWA CABLE SYSTEMS CO., LTD.)
(Lecture Hall)
|
16:30
|
Design Aspects for DC-HTS Cables in Hybrid-Electric Propulsion Systems for Aircraft
-
Sonja Schlachter
(Karlsruhe Institute of Technology)
(Lecture Hall)
|
16:45
|
Development of round flexible HTS CORC® wires for fault current limiting applications
-
Jeremy Weiss
(Advanced Conductor Technologies)
(Lecture Hall)
|
15:00
|
M2OrF - MgB2 Wires and Tapes: Processing & Properties
-
Michael Susner
(U.S. Air Force Research Laboratory)
David Cardwell
(University of Cambridge)
(until 17:15)
(Hall of Ideas - EH)
|
15:30
|
Development of MgB2 superconductor wire and coils for practical applications at Hyper Tech Research
- Mr
Michael Tomsic
(Hyper Tech Research)
(Hall of Ideas - EH)
|
15:45
|
[Invited] Transport properties of IMD-processed 100 m class 6-filament MgB2 wire and solenoid coil
- Dr
Dongliang Wang
(Institute of Electrical Engineering, CAS)
(Hall of Ideas - EH)
|
16:15
|
Effect of Carbon and Dy2O3 co-doping on the Critical Field and Transport of MgB2 wires
-
Fang Wan
(The Ohio State University)
(Hall of Ideas - EH)
|
16:30
|
Structure and superconducting characteristics of magnesium diboride; substitution of boron atoms to oxygen and carbon.
- Prof.
Tatiana Prikhna
(Institute for Superhard Materials of the National Academy of Sciences of Ukraine)
(Hall of Ideas - EH)
|
16:45
|
The Development of Persistent joints for MgB2 Conductors
-
Chris Kovacs
(The Ohio State University)
(Hall of Ideas - EH)
|
17:00
|
Doping Effect of Dy2O3 on the Phase Formation in the MgB2 Wire Prepared by Advanced Internal Magnesium Infiltration (AIMI) Method
-
Fang Wan
(The Ohio State University)
(Hall of Ideas - EH)
|
15:00
|
M2OrG - Materials III: Processing of Metals and Alloys
-
Dick Reed
(Cryogenic Materials, Inc.) Prof.
Karl Hartwig
(Texas A&M University)
(until 17:00)
(Hall of Ideas - GJ)
|
15:00
|
Mechanical and axial fatigue behavior of 18 percent Nickel Maraging steel C250 for cryogenic applications
-
Robert Walsh
(Florida State University) Dr
Shreyas Balachandran
(National High Field Magnet Laboratory)
(Hall of Ideas - GJ)
|
15:15
|
The influence of cryorolling conditions on the mechanical properties and microstructure of 316LN austenitic stainless steel
- Prof.
Tibor Kvačkaj
(Technical University of Kosice)
(Hall of Ideas - GJ)
|
15:30
|
Deformation behaviour and microstructure of a Ni-Mo-Cr alloy at cryogenic temperatures
- Dr
Jan Sas
(The Karlsruhe Institute of Technology)
(Hall of Ideas - GJ)
|
15:45
|
Axial Fatigue Life of Three Austenitic Steels at 4 K
-
Robert Walsh
(Florida State University)
(Hall of Ideas - GJ)
|
16:00
|
Influence of ultrafine-grained copper by ECAP on thermal properties at cryogenic conditions
- Dr
Klaus-Peter Weiss
(KIT, Institute for Technical Physics)
(Hall of Ideas - GJ)
|
16:15
|
Temperature dependence on tensile properties of Cu-40mass%Fe dual phase alloy
- Dr
Norimitsu Koga
(Yokohama National University)
(Hall of Ideas - GJ)
|
16:30
|
Crystallographic Orientation Analysis of Facets in Ti-5Al-2.5Sn ELI Forged Alloy
-
Yoshinori Ono
(National Institute for Materials Science)
(Hall of Ideas - GJ)
|
16:45
|
Effect of Thermomechanical Processing of 316LN Austenitic Stainless Steel on Microstructure and Mechanical Properties at Cryogenic Temperatures
-
Pavel Podany
(COMTES FHT a.s.)
(Hall of Ideas - GJ)
|
17:00
|
--- Free Time (5:00 - 7:00 p.m.) ---
|
19:00
|
--- Banquet/Farewell Event (7:00 - 9:00 p.m.) ---
|