Simon Rogers
(University of Illinois at Urbana-Champaign)
5/16/23, 9:00 AM
Abstract:
Yield stress fluids are often thought about in a piecewise manner as behaving like elastic solids below the yield stress and like generalized Newtonian liquids above it. Accurate determination of the yield stress is therefore crucial to understanding and predicting the behaviour of yield stress fluids such as inks for 3D printing, foods and cosmetics, muds and soils, and many...
Dr
Ergun Kuru
(University of Alberta)
5/16/23, 10:30 AM
Dr
Michel Orsi
(Levich Institute and Department of Chemical Engineering, CUNY City College of New York, New York, NY 10031, USA)
5/16/23, 10:30 AM
Zelai Xu
(University of British Columbia)
5/16/23, 10:30 AM
Ms
Daria Strugova
(École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)
5/16/23, 10:30 AM
Prof.
Yasuya Nakayama
(Kyushu University)
5/16/23, 10:50 AM
Prof.
Aleksandar Donev
(Courant Institute, New York University)
5/16/23, 10:50 AM
Rajas Shah
(University of Calgary)
5/16/23, 10:50 AM
Anthony Wachs
(University of British Columbia)
5/16/23, 11:10 AM
Ms
Marzieh Alishahi
(University of British Columbia)
5/16/23, 11:10 AM
Lidija Slemenik Perše
5/16/23, 11:10 AM
Akshai Bose
5/16/23, 11:10 AM
Dr
Alondra Renteria
(UBC, Mechanical Engineering)
5/16/23, 11:30 AM
Mahdi Izadi
5/16/23, 11:30 AM
Mingfeng Qiu
(Ecole Normale Supérieure)
5/16/23, 11:30 AM
Ruizi Zhang
(University of British Columbia)
5/16/23, 11:50 AM
Dr
Chaimongkol Saengow
(University of Illinois Urbana-Champaign)
5/16/23, 11:50 AM
Nicky Eshtiaghi
(RMIT University)
5/16/23, 12:50 PM
Abstract:
Sludge rheology is important for the design and operation of sludge treatment processes in terms of process optimisation and maintenance cost reduction. Sludge rheology has a significant impact on the performance of pumps, anaerobic digesters, dewaterability equipment, mixers, and heat exchangers.
A large portion of the total energy consumption in any sludge treatment plants...
Ziyue Zhang
(The University of British Columbia)
5/16/23, 2:00 PM
Prof.
Yaman Boluk
(University of Alberta)
5/16/23, 2:00 PM
Sarah Hormozi
(Cornell University)
5/16/23, 2:00 PM
Dr
Aniruddha Sanyal
(National Institute of Technology Calicut)
5/16/23, 2:00 PM
Mr
Hidenobu Taneda
(Center for Polymer Interface and Molecular Adhesion Science, Kyushu Univeristy)
5/16/23, 2:20 PM
Dr
Lomesh Tikariha
(IIT Bombay)
5/16/23, 2:20 PM
Xavier Chateau
(ENPC, France)
5/16/23, 2:40 PM
Jun-ichi Horinaka
5/16/23, 2:40 PM
Jan Gustowski
(University of British Columbia)
5/16/23, 2:40 PM
Ehsan Behzadfar
(Toronto Metropolitan University)
5/16/23, 3:00 PM
Nicos Martys
(National Institute of Standards and Technology)
5/16/23, 3:00 PM
Dr
Hessameddin Yaghoobi
(Department of Physics & Atmospheric Science, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada and School of Biomedical Engineering, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada)
5/16/23, 3:00 PM
Dr
Georges Younes
(Polytechnique de Montréal)
5/16/23, 3:20 PM
Prof.
Isamu Kaneda
(Rakuno Gakuen University)
5/16/23, 3:20 PM
Leonardo Martín Alarcón
(University of Calgary)
5/16/23, 3:20 PM
Prof.
Paulo de Souza Mendes
(PUC-Rio)
5/16/23, 4:10 PM
Hartmut Löwen
5/16/23, 4:10 PM
Dr
Martyna Goral
(Department of Mathematics, UBC, Vancouver, Canada and PMMH lab, ESPCI-PSL Paris, France)
5/16/23, 4:10 PM
Denis Rodrigue
5/16/23, 4:10 PM
Mohammad Reza Rokhforouz
(UBC Chemical and Biological Engineering)
5/16/23, 4:30 PM
Prof.
Pierre Carreau
(Center for High Performance Polymer and Composite systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montreal, Québec, H3T 1J4, Canada)
5/16/23, 4:30 PM
Ms
Zeinab Mousavi
(Centre for High performance Polymer and Composite Systems (CREPEC), Chemical Engineering Department, Polytechnique Montreal, Montreal, Quebec H3T 1J4, Canada)
5/16/23, 4:50 PM
Mr
Durgesh Kavishvar
(University of Toronto)
5/16/23, 4:50 PM
Vaseem Shaik
(University of British Columbia)
5/16/23, 4:50 PM
Prof.
SeHyun SHIN
(Korea University)
5/16/23, 4:50 PM
Prof.
Arild Saasen
(University of Stavanger)
5/16/23, 5:10 PM
Seyed Arman Abtahi
5/16/23, 5:10 PM
Leonardo Martín Alarcón
(University of Calgary)
5/16/23, 5:10 PM
Prof.
Xiaorong Wang
(Tongji University)
5/16/23, 5:10 PM
Lalit Kumar
(Indian institute of Technology Bombay)
5/16/23, 5:30 PM
Dr
Jacob John
(Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Canada)
5/16/23, 5:30 PM
Min Chan Kim
(Pusan National University (Republic of Korea))
5/16/23, 5:30 PM
Prof.
Joseph Samaniuk
(Colorado School of Mines)
5/16/23, 5:30 PM
Jiahao Gong
5/16/23, 7:00 PM
David Moonay
5/16/23, 7:00 PM
Mouad Boudina
(University of British Columbia)
5/16/23, 7:00 PM
Cody Mischel
5/16/23, 7:00 PM
Mr
Yukihiro Mineyama
(National Institute of Technology, Tsuyama College, Advanced Mechanical and Control System Engineering Course)
5/16/23, 7:00 PM
Seunghoon Kang
5/16/23, 7:00 PM
Aya Kaide
(Yamaguchi University)
5/16/23, 7:00 PM
Fatemeh Bararpour
5/16/23, 7:00 PM
Jourdain Piette
(UBC)
5/16/23, 7:00 PM
EunHui Jeong
5/16/23, 7:00 PM
예슬 김
(Sookmyung Women's University)
5/16/23, 7:00 PM
Kengo Fukushima
5/16/23, 7:00 PM
Prof.
Jingyu Xu
(Institute of Mechanics, Chinese Academy of Science)
5/16/23, 7:00 PM
Lanxin Mo
(University of British Columbia)
5/16/23, 7:00 PM
Prof.
Nicky Eshtiaghi
(RMIT University, Australia)
5/16/23, 7:00 PM
Maryam Ghorbani
(PhD student)
5/16/23, 7:00 PM
Mr
Miguel Esteban Villalba Chehab
(The University of British Columbia)
5/16/23, 7:00 PM
Tianhong Chen
(TA Instruments - Waters LLC)
5/16/23, 7:00 PM
Atsushi Matsumoto
(University of Fukui)
5/16/23, 7:00 PM
176.
OPTIMIZATION OF THE DRAG-REDUCING EFFECT BY CONTROLLING THE PREPARATION CONDITIONS OF ADDITIVES
Takashi Saeki
(Yamaguchi University)
5/16/23, 7:00 PM
Scott Charabin
(UBC)
5/16/23, 7:00 PM
Yeeun Kim
(Sookmyung Women’s University)
5/16/23, 7:00 PM
mylapalli praveen kumar
(University of Hyderabad)
5/16/23, 7:00 PM
Mr
Yongjun Lu
(Petrochina Research Institute of Exploration and Development)
5/16/23, 7:00 PM
Ms
Madeleine Hallman
(Department of Chemical and Biological Engineering, University of British Columbia)
5/16/23, 7:00 PM
Jun Dong Park
(Sookmyung Women's University)
5/16/23, 7:00 PM
Omid Hajieghrary
(University of British Columbia)
5/17/23, 10:30 AM
Nitash P. BALSARA
(UC Berkeley)
5/17/23, 10:30 AM
Reghan Hill
(McGill University)
5/17/23, 10:30 AM
Dr
VIVEK BINDIGANAVILE
(UNIVERSITY OF ALBERTA)
5/17/23, 10:50 AM
Ida Karimfazli
(Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada)
5/17/23, 11:10 AM
Ralph Colby
5/17/23, 11:10 AM
Nicole Demarquette
(École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)
5/17/23, 11:10 AM
Dr
Lola Gonzalez-Garcia
(INM-Leibniz Institute for New Materials)
5/17/23, 11:30 AM
Tadashi Inoue
(Osaka University)
5/17/23, 11:30 AM
Mr
Amir Malmir
(The University of British Columbia)
5/17/23, 11:30 AM
Tadashi Inoue
(Osaka University), Dr
Yumi Matsumiya
(ICR, Kyoto University)
5/17/23, 11:50 AM
Dr
Paulina Latko-Durałek
(Warsaw University of Technology)
5/17/23, 11:50 AM
Jaewook Nam
(Seoul National University)
5/17/23, 12:50 PM
Abstract:
For next-generation electronics systems and devices, such as flexible displays and energy harvesting (or storage) devices, high performance, versatility, and flexibility are frequently necessary. A film, which is often a polymer or soft substrate with numerous layers of electrically conductive, semiconducting, and insulating materials superimposed on it, is a key component of...
Youngdon Kwon
5/17/23, 2:00 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
George Petekidis
(IESL-FORTH, Crete, Greece)
5/17/23, 2:00 PM
Takashi Uneyama
(Nagoya University)
5/17/23, 2:00 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Prof.
van Ruymbeke Evelyne
(Bio and Soft Matter, UClouvain)
5/17/23, 2:00 PM
Takashi Taniguchi
(Department of Chemical Engineering, Graduate school of engineering, Kyoto University)
5/17/23, 2:20 PM
Katsuhiko Tsunoda
5/17/23, 2:20 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Yusuke Koide
(Osaka University)
5/17/23, 2:40 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Yuya Doi
(Nagoya University)
5/17/23, 2:40 PM
Mr
Jeong Hoon Park
(School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Korea)
5/17/23, 2:40 PM
Dr
Thanh-Tam MAI
(Kyoto University, Kyoto, Japan)
5/17/23, 2:40 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Dr
Taniguchi Takashi
(Department of Chemical Engineering, Graduate school of engineering, Kyoto University)
5/17/23, 3:00 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Dongjie Liu
5/17/23, 3:00 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
David Moonay
5/17/23, 3:00 PM
Prof.
Yuichi Masubuchi
(Nagoya University)
5/17/23, 3:00 PM
Shinichi Sakurai
5/17/23, 3:20 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Arkaprava Pal
(IISc Bangalore)
5/17/23, 3:20 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
quan chen
(Changchun institute of applied chemistry chinese academy of science)
5/17/23, 3:20 PM
Dr
Anthony Stickland
(The University of Melbourne)
5/17/23, 3:20 PM
Takumitsu Kida
(Japan Advanced Institute of Science and Technology)
5/17/23, 4:10 PM
Dr
Jeffrey Martin
(Johnson & Johnson Consumer Inc.)
5/17/23, 4:10 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Takuya Katashima
(The University of Tokyo)
5/17/23, 4:10 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Dr
Yumi Matsumiya
(ICR, Kyoto University)
5/17/23, 4:10 PM
Dr
Takeshi Sato
(Institute for Chemical Research, Kyoto University, Kyoto, Japan)
5/17/23, 4:30 PM
Min-Hyung Markus Lee
(University of Calgary)
5/17/23, 4:30 PM
Damien Huet
5/17/23, 4:50 PM
Dr
Sirio Orozco-Fuentes
(Northumbria University)
5/17/23, 4:50 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Prof.
Yuichi Masubuchi
(Nagoya University)
5/17/23, 4:50 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Jun-ichi Takimoto
5/17/23, 4:50 PM
Ms
Nayeon Park
(Seoul National University)
5/17/23, 5:10 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Takashi Uneyama
(Nagoya University)
5/17/23, 5:10 PM
Takamasa Sakai
(The University of Tokyo)
5/17/23, 5:10 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Jourdain Piette
(UBC)
5/17/23, 5:10 PM
Prof.
Santosh Ansumali
(Jawaharlal Nehru Centre for Advanced Scientific Research)
5/17/23, 5:30 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Mr
Takashi Yasuda
(The University of Tokyo, Japan)
5/17/23, 5:30 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Mr
Bin Xia
(Tongji University)
5/17/23, 5:30 PM
Thomasina Ball
(University of Warwick)
5/18/23, 9:00 AM
Abstract:
Radial displacement flows of viscoplastic fluid in a Hele-Shaw cell can give rise to a range of instabilities. Theoretically, the viscoplastic version of the Saffman-Taylor interfacial instability [1] is predicted to occur when the yield-stress fluid is displaced by a Newtonian one. The interface is expected to remain stable, however, if the yield-stress fluid displaces the...
Aysan Razzaghi
(University of Toronto)
5/18/23, 10:30 AM
Quan Chen
(Changchun Institute of Applied Chemistry, Chinese Academy of Science)
5/18/23, 10:30 AM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Dimitris Vlassopoulos
(FORTH and University of Crete)
5/18/23, 10:30 AM
Arisa Yokokoji
(Okinawa Institute of Science and Technology, Okinawa, Japan)
5/18/23, 10:30 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Masoud Daneshi
(Department of Mathematics, University of British Columbia)
5/18/23, 10:50 AM
Mr
Fabian Hillebrand
(Okinawa Institute of Science and Technology Graduate University)
5/18/23, 10:50 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Prof.
Ruri Hidema
(Kobe University)
5/18/23, 11:10 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Zelai Xu
(University of British Columbia)
5/18/23, 11:10 AM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Prof.
Seong Jae Lee
(The University of Suwon)
5/18/23, 11:10 AM
Kenji Urayama
5/18/23, 11:10 AM
124.
Instabilities in immiscible multi-layer viscous shear flows in the presence of interfacial slip
Anna Katsiavria
(Imperial College London)
5/18/23, 11:30 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Shinichi Sakurai
5/18/23, 11:30 AM
Dr
Takeshi Sato
(Institute for Chemical Research, Kyoto University)
5/18/23, 11:30 AM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Alireza Mashayekhi
(University of British Columbia)
5/18/23, 11:30 AM
Yun-Han Huang
(University of British Columbia)
5/18/23, 11:50 AM
Prof.
Nino Grizzuti
(Università degli Studi di Napoli Federico II)
5/18/23, 11:50 AM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Razie Khalesi Moghaddam
(university of calgary)
5/18/23, 11:50 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Prof.
Kyung Hyun Ahn
(Seoul National University)
5/18/23, 11:50 AM
Joerg Laeuger
(Anton Paar Germany)
5/18/23, 2:00 PM
Dae Yeon Kim
(Seoul National University (SNU))
5/18/23, 2:00 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Ali Pourzahedi
5/18/23, 2:00 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Alexander Zinchenko
(University of Colorado Boulder)
5/18/23, 2:00 PM
Mohammad Reza Daneshvar Garmroodi
(Concordia University)
5/18/23, 2:20 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Xiang Li
(Hokkaido University)
5/18/23, 2:20 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Ravi Jagadeeshan
(Department of Chemical and Biological Engineering, Monash University)
5/18/23, 2:20 PM
Manabu Kato
(National Institute of Technology, Tsuyama College)
5/18/23, 2:40 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Prof.
Vivek Narsimhan
(Davidson School of Chemical Engineering Purdue University)
5/18/23, 2:40 PM
Atsushi Matsumoto
(University of Fukui)
5/18/23, 2:40 PM
Miguel Moyers
5/18/23, 2:40 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Xuemeng Wang
(University of British Columbia)
5/18/23, 3:00 PM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Marjan Zare
(University of British Columbia)
5/18/23, 3:00 PM
Prof.
Alan Jeffrey Giacomin
(Queen's University)
5/18/23, 3:00 PM
Prof.
Shigeru Okamoto
(Nagoya Institute of Technology)
5/18/23, 3:00 PM
Self-assembly and Flow-induced Systems and Gels
Oral Presentation
Gesse Roure
(University of Colorado Boulder)
5/18/23, 3:20 PM
Mr
Kosaku Tao
(1;Osaka Research Institute of Industrial Science and Technology. 2;Depertment of Material Science, School of Engineering, University of Shiga Prefecture.)
5/18/23, 3:20 PM
Arun Ramachandran
(University of Toronto)
5/19/23, 9:00 AM
Abstract:
In classical wetting, the spreading of an emulsion drop on a surface is preceded by the formation of a bridge connecting the drop and the surface across the sandwiched film of the suspending medium. However, this widely accepted mechanism ignores the finite solubility of the drop phase in the medium. We present experimental evidence of a new wetting mechanism, whereby the drop...
Prof.
Shinji Tamano
(Nagoya Institute of Technology)
5/19/23, 10:30 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Benjamin Yavitt
(University of Cincinnati)
5/19/23, 10:30 AM
Dr
Leopoldo Gutierrez
(Universidad de Concepción, Department of Metallurgical Engineering),
Leopoldo Gutierrez
(Universidad de Concepción, Department of Metallurgical Engineering)
5/19/23, 10:30 AM
Joao Maia
(Case Western Reserve University)
5/19/23, 10:30 AM
Industrial Rheology in Polymer Processing
Oral Presentation
61.
Experimental Validation of Viscosity Homogenization Treatment System for Waste Plastic Recycling
Mr
Hiroki Endo
(Dept. of Mechanical Engineering, Nagaoka University of Technology)
5/19/23, 10:50 AM
Industrial Rheology in Polymer Processing
Oral Presentation
Anthony Stickland
(The University of Melbourne)
5/19/23, 10:50 AM
JOUNG SOOK HONG
5/19/23, 11:10 AM
Industrial Rheology in Polymer Processing
Oral Presentation
Yuya Doi
(Nagoya University)
5/19/23, 11:10 AM
Nilanka Ekanayake
(The University of Melbourne)
5/19/23, 11:10 AM
Rodrigo Mitishita
(University of British Columbia)
5/19/23, 11:10 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
Myungjae Lee
5/19/23, 11:30 AM
Industrial Rheology in Polymer Processing
Oral Presentation
Ms
Nafiseh Moradinik
(The University of British Columbia)
5/19/23, 11:30 AM
Fernando Betancourt
(University of Concepción)
5/19/23, 11:30 AM
Li Xi
(McMaster University)
5/19/23, 11:30 AM
Non-Newtonian Fluid Mechanics and Stability
Oral Presentation
