Focus on:  Hide Contributions
Back to Conference View
Login
8th Pacific Rim Conference on Rheology

from Monday, 15 May 2023 (08:00) to Friday, 19 May 2023 (16:00)
University of British Columbia, Point Grey Campus (Mathematics & Geography Buildings)

        : Sessions
    /     : Talks
        : Breaks
15 May 2023
16 May 2023
17 May 2023
18 May 2023
19 May 2023
AM
08:45
Opening Remarks - Savvas Hatzikiriakos (The University of British Columbia) Ian Frigaard (University of British Colubia) (until 09:00) (Room 100)
09:00
Plenary Presentations - Dimitris Vlassopoulos (FORTH and University of Crete) (until 10:00) (Room 100)
09:00 What we learn about yielding from recovery rheology - Simon Rogers (University of Illinois at Urbana-Champaign)   (Room 100)
10:00 --- Coffee Break ---
10:30
Biomaterials and Biological Systems - Yaman Boluk (University of Alberta) (until 12:10) (Room 100)
10:30 Poroelastic Modelling Reveals The Cooperation Between Two Mechanisms For Albuminuria - Zelai Xu (University of British Columbia)   (Room 100)
10:50 Hydrodynamics and rheology of fluctuating, semiflexible, inextensible, and slender filaments in Stokes flow - Prof. Aleksandar Donev (Courant Institute, New York University)   (Room 100)
11:10 TRIBOLOGY AND RHEOLOGY OF HYALURONIC ACID BASED CELLULOSE NANOCRYSTAL SUSPENSIONS - Akshai Bose   (Room 100)
11:30 Self-organized cable formation and force transmission in an active vertex model for biological tissues - Mingfeng Qiu (Ecole Normale Supérieure)   (Room 100)
11:50 --- No talk scheduled ---
10:30
Blends, Composites and Nanocomposites - Reghan Hill (McGill University) (until 12:10) (Room 212)
10:30 STUDY OF THE STABILITY OF ELECTRICAL AND RHEOLOGICAL PROPERTIES OF ELECTRICALLY CONDUCTIVE COMPOSITES WITH CO-CONTINUOUS MORPHOLOGY - Ms Daria Strugova (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)   (Room 212)
10:50 Should we keep choosing nano-sized particles to kinetically stabilize co-continuous blends? - Rajas Shah (University of Calgary)   (Room 212)
11:10 RHEOLOGICAL AND CONDUCTIVE PROPERTIES OF INJECTION- AND COMPRESSION-MOLDED CARBON NANOTUBE POLYMER COMPOSITES - Lidija Slemenik Perše   (Room 212)
11:30 --- No talk scheduled ---
10:30
Rheology in the Oil and Gas Industry - Paulo de Souza Mendes (PUC-Rio) (until 12:10) (Room 200)
10:30 KEYNOTE: Assessment of Critical Conditions Required for Effective Hole Cleaning in Horizontal Wells - Effects of Fluid Rheological Properties and Near Wall Turbulence on the Particle Removal From Bed Deposits - Dr Ergun Kuru (University of Alberta)   (Room 200)
11:10 Primary cementing of horizontal wells: laminar displacement flows in obstructed eccentric annuli - Ms Marzieh Alishahi (University of British Columbia)   (Room 200)
11:30 Cementing displacement flows of shear-thinning fluids in horizontal wells, with and without casing rotation - Dr Alondra Renteria (UBC, Mechanical Engineering)   (Room 200)
11:50 Displacement flows of shear thinning fluids in a vertical annulus - Ruizi Zhang (University of British Columbia)   (Room 200)
10:30
Suspensions and Colloids - Sarah Hormozi (Cornell University) (until 12:10) (Room 147)
10:30 Non-Brownian suspensions in pressure-driven flow: numerical simulations with frame-invariant sub-grid corrections - Dr Michel Orsi (Levich Institute and Department of Chemical Engineering, CUNY City College of New York, New York, NY 10031, USA)   (Room 147)
10:50 FINITE SYSTEM SIZE CORRECTION IN MICRORHEOLOGICAL ANALYSIS UNDER PERIODIC BOUNDARY CONDITIONS : A DIRECT NUMERICAL SIMULATION APPROACH - Prof. Yasuya Nakayama (Kyushu University)   (Room 147)
11:10 Lubrication force between two approaching cylinders in a Bingham fluid - Anthony Wachs (University of British Columbia)   (Room 147)
11:30 Cross Flow Filtration of Viscoplastic Suspensions, a Robust Mathematical Model - Mahdi Izadi   (Room 147)
11:50 IMPARTING EXTENSIBILITY TO JAMMED COLLOIDAL INKS FOR DIRECT-INK-WRITING PRINTABILITY - Dr Chaimongkol Saengow (University of Illinois Urbana-Champaign)   (Room 147)
09:00
Plenary Presentations - Ralph Colby (until 10:00) (Room 100)
09:00 COMPARISON OF VISCOELASTIC AND DIELECTRIC PROPERTIES OF TYPE-A CHAIN: EXPERIMENTAL ATTEMPT FOR DEEPER UNDERSTANDING OF POLYMER RHEOLOGY - Hiroshi Watanabe   (Room 100)
10:00 --- Coffee Break ---
10:30
Blends, Composites and Nanocomposites - Xiaorong Wang (until 12:10) (Room 212)
10:30 KEYNOTE: Role of network compressibility on the complex conductivity of structured polyelectrolyte hydrogels - Reghan Hill (McGill University)   (Room 212)
11:10 ULTRASOUND EFFECT ON DISPERSION AND DISTRIBUTION OF GRAPHITIC MATERIALS INSIDE DIFFERENT PDMS - Nicole Demarquette (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)   (Room 212)
11:30 FLUID COMPOSITES AS ALTERNATIVES TO SOLID ELECTRICAL COMPONENTS - Dr Lola Gonzalez-Garcia (INM-Leibniz Institute for New Materials)   (Room 212)
11:50 THE RHEOLOGICAL PROPERTIES OF HOT MELT ADHESIVES DOPED WITH CARBON NANOTUBES - Dr Paulina Latko-Durałek (Warsaw University of Technology)   (Room 212)
10:30
Hiroshi Watanabe – Honorary Symposium - Yuichi Masubuchi (Nagoya University) (until 12:10) (Room 100)
10:30 KEYNOTE: RESPONSE OF BLOCK COPOLYMER ELECTROLYTES TO IONIC CURRENT - Nitash P. BALSARA (UC Berkeley)   (Room 100)
11:10 GLASS TRANSITION AND ENTANGLEMENT IN SEMIFLEXIBLE CONJUGATED POLYMER MELTS - Ralph Colby   (Room 100)
11:30 Nano Rheology of Glassy Materials using Dielectric Molecular Probe - Tadashi Inoue (Osaka University)   (Room 100)
11:50 Profile of Hiroshi Watanabe - Dr Yumi Matsumiya (ICR, Kyoto University) Tadashi Inoue (Osaka University)   (Room 100)
10:30
Rheology in the Oil and Gas Industry - Masoud Daneshi (Department of Mathematics, University of British Columbia) (until 12:10) (Room 200)
10:30 DRIFT FLUX MODELING OF GAS RELEASE IN OIL SAND TAILING PONDS - Omid Hajieghrary (University of British Columbia)   (Room 200)
10:50 RHEOLOGY OF FRESH CEMENT PASTE AS AFFECTED BY CELLULOSE NANOFIBRES AND SUPERPLASTICIZER - Dr VIVEK BINDIGANAVILE (UNIVERSITY OF ALBERTA)   (Room 200)
11:10 DEFYING GRAVITY: THE FLUID MECHANICS OF OFF-BOTTOM PLUG PLACEMENT - Ida Karimfazli (Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada)   (Room 200)
11:30 RHEOLOGICAL BEHAVIOR OF MATURE FINE TAILINGS - Mr Amir Malmir (The University of British Columbia)   (Room 200)
11:50 --- No talk scheduled ---
09:00
Plenary Presentations - Ian Frigaard (University of British Colubia) (until 10:00) (Room 100)
09:00 JNNFM Walters Award Lecture: Viscoplastic Fingers and Fractures in a Hele-Shaw Cell - Thomasina Ball (University of Warwick)   (Room 100)
10:00 --- Coffee Break ---
10:30
Emulsions, Foams and Bubbles - Marjan Zare (University of British Columbia) (until 12:10) (Room 147)
10:30 Controlled Collision of Hele-Shaw Droplets in Extensional Flow Using a Six-Port Microfluidic Device - Aysan Razzaghi (University of Toronto)   (Room 147)
10:50 Bubbles in Yield Stress Fluids: Link between the Rheology and Stability of Bubbles - Masoud Daneshi (Department of Mathematics, University of British Columbia)   (Room 147)
11:10 PREPARATION AND PROPERTIES OF CONDUCTIVE FOAMS VIA HIGH INTERNAL PHASE EMULSION - Prof. Seong Jae Lee (The University of Suwon)   (Room 147)
11:30 Shear-triggered Coalescence - Alireza Mashayekhi (University of British Columbia)   (Room 147)
11:50 A New Instrument for Interfacial Dilational Rheology - Yun-Han Huang (University of British Columbia)   (Room 147)
10:30
Hiroshi Watanabe – Honorary Symposium - Youngdon Kwon (until 12:10) (Room 100)
10:30 KEYNOTE: Rheology modification of polymeric networks via loop threading - Dimitris Vlassopoulos (FORTH and University of Crete)   (Room 100)
11:10 Time-Strain Separability and Inseparability in Multiaxial Stress Relaxation of Polymer Gels with Permanent and Transient Crosslinks - Kenji Urayama   (Room 100)
11:30 INTRIGUING MELTING BEHAVIOR OF THE NATURAL RUBBER CRYSTAL FORMED BY STRAIN-INDUCED CRYSTALLIZATION - Shinichi Sakurai   (Room 100)
11:50 Have you ever listened to the sound of the fluid? - Prof. Kyung Hyun Ahn (Seoul National University)   (Room 100)
10:30
Non-Newtonian Fluid Mechanics and Stability - Miguel Moyers (until 12:10) (Room 200)
10:30 Rheological effects on purely-elastic flow asymmetries in the cross-slot geometry - Arisa Yokokoji (Okinawa Institute of Science and Technology, Okinawa, Japan)   (Room 200)
10:50 FLOW OF A WORMLIKE MICELLAR SOLUTION OVER A LONG CAVITY - Mr Fabian Hillebrand (Okinawa Institute of Science and Technology Graduate University)   (Room 200)
11:10 EFFECTS OF CHANNEL LENGTH IN EXPANSION PARTS ON FLOW REGIMES OF POLYMER SOLUTION IN CONSECUTIVE ABRUPT CONTRACTION-EXPANSION CHANNELS - Prof. Ruri Hidema (Kobe University)   (Room 200)
11:30 Instabilities in immiscible multi-layer viscous shear flows in the presence of interfacial slip - Anna Katsiavria (Imperial College London)   (Room 200)
11:50 EFFECT OF ULTRASOUND FIELDS ON ASPHALTENE-LADEN W/O INTERFACES: A MICRORHEOLOGY APPROACH - Razie Khalesi Moghaddam (university of calgary)   (Room 200)
10:30
Self-assembly and Flow-induced Systems/Gels - Takamasa Sakai (The University of Tokyo) (until 12:10) (Room 212)
10:30 KEYNOTE: Nonlinear Rheology of Concentrated Poly(vinyl alcohol)/Borax Aqueous Solution - Quan Chen (Changchun Institute of Applied Chemistry, Chinese Academy of Science)   (Room 212)
11:10 Hystereses In One-dimensional Compression Of A Poroelastic Hydrogel - Zelai Xu (University of British Columbia)   (Room 212)
11:30 NONLINEAR RHEOLOGY OF ENTANGLED WORMLIKE MICELLES: A SLIP-SPRING SIMULATION STUDY - Dr Takeshi Sato (Institute for Chemical Research, Kyoto University)   (Room 212)
11:50 COUPLING A IONIC SURFACTANT AND A DRUG SALT: EQUILIBRIUM CHARACTERISTIC PARAMETERS & STRAIN HARDENING IN START-UP FLOW - Prof. Nino Grizzuti (Università degli Studi di Napoli Federico II)   (Room 212)
09:00
Plenary Presentations - Reghan Hill (McGill University) (until 10:00) (Room 100)
09:00 Substrate colonization by an emulsion drop prior to spreading - Arun Ramachandran (University of Toronto)   (Room 100)
10:00 --- Coffee Break ---
10:30
Industrial Rheology in Polymer Processing - Jourdain Piette (UBC) (until 11:50) (Room 200)
10:30 Rheology-Driven Continuous In-Melt Separation of PET/PE Blends and Laminates: A Novel Approach to Recycling - Joao Maia (Case Western Reserve University)   (Room 200)
10:50 Experimental Validation of Viscosity Homogenization Treatment System for Waste Plastic Recycling - Mr Hiroki Endo (Dept. of Mechanical Engineering, Nagaoka University of Technology)   (Room 200)
11:10 DEVELOPMENT OF COMPOSITE VIA SECONDARY POLYMER-INDUCED PARTICLE AGGREGATION AND DESTRUCTION OF ITS PARTICLE AGGREGATION DURING 3D PRINTING - JOUNG SOOK HONG   (Room 200)
11:30 ANALYSIS OF OPERATING LIMITS OF VACUUM-ASSISTED SLOT DIE COATING OF HERSCHEL-BULKLEY FLUIDS - Myungjae Lee   (Room 200)
10:30
Non-Newtonian Fluid Mechanics and Stability - Ruri Hidema (until 11:50) (Room 100)
10:30 KEYNOTE: Effect of local relaxation time on drag reduction in turbulent boundary layer flow of viscoelastic fluids - Prof. Shinji Tamano (Nagoya Institute of Technology)   (Room 100)
11:10 Turbulent drag reduction with flexible and rigid polymer solutions: from low to maximum drag reduction - Rodrigo Mitishita (University of British Columbia)   (Room 100)
11:30 Relating elastoinertial turbulence to the phenomenology of polymer drag reduction - Li Xi (McMaster University)   (Room 100)
10:30
Polymer Solutions and Melts - Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University) (until 11:50) (Room 212)
10:30 KEYNOTE: Modular material properties in bimodal blends of amine functionalized polyolefins - Benjamin Yavitt (University of Cincinnati)   (Room 212)
11:10 Linear Viscoelastic Properties of Comb-Shaped Ring Polystyrenes - Yuya Doi (Nagoya University)   (Room 212)
11:30 Application of a robust self-healing experimental protocol for associating polymers - Ms Nafiseh Moradinik (The University of British Columbia)   (Room 212)
10:30
Rheology in the Mining Industry - Masoud Daneshi (Department of Mathematics, University of British Columbia) (until 11:50) (Room 147)
10:30 RHEOLOGICAL CHARACTERIZATION OF SUSPENSIONS GENERATED FROM COPPER ORES O VARYING MINERALOGICAL FEATURES AT GRINDING CONDITIONS - Dr Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering) Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering)   (Room 147)
10:50 Quantifying the effects of fines and clays on mineral tailings dewatering - Anthony Stickland (The University of Melbourne)   (Room 147)
11:10 Modelling high-pressure dewatering rolls for mineral tailings - Nilanka Ekanayake (The University of Melbourne)   (Room 147)
11:30 Influence of fluid type in the transition from spray to roping in hydrocyclones - Fernando Betancourt (University of Concepción)   (Room 147)
PM
18:00
Social Events (until 21:00) (The Nest, Level 4)
18:00 --- Registration with dinner and drinks at The Gallery ---
12:10 --- Lunch ---
12:50
Plenary Presentations - Paulo de Souza Mendes (PUC-Rio) (until 13:50) (Room 100)
12:50 SLUDGE RHEOLOGY AND ITS APPLICATIONS IN SLUDGE TREATMENT PROCESSES - Nicky Eshtiaghi (RMIT University)   (Room 100)
14:00
Biomaterials and Biological Systems - Dana Grecov (University of British Columbia) (until 15:40) (Room 104)
14:00 KEYNOTE: Bioprinting of collagen hydrogels in supported gel environment - Prof. Yaman Boluk (University of Alberta)   (Room 104)
14:40 EFECTS OF GELATION CONCENTRATION ON CYCLIC DEFORMATION BEHAVIOR OF POLYSACCHARIDE HYDROGELS - Jun-ichi Horinaka   (Room 104)
15:00 TENDON FASCICLE-INSPIRED COLLAGEN MULTIFILAMENT BUNDLE PRODUCED BY MULTI-PIN CONTACT DRAWING OF AN AQUEOUS COLLAGEN-POLYETHYLENE OXIDE SOLUTION - Dr Hessameddin Yaghoobi (Department of Physics & Atmospheric Science, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada and School of Biomedical Engineering, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada)   (Room 104)
15:20 EFFECT OF HOMOGENIZATION OF RAW MILK ON THE PHYSICAL PROPERTIES OF AGED CHEESE - Prof. Isamu Kaneda (Rakuno Gakuen University)   (Room 104)
14:00
Blends, Composites and Nanocomposites - Denis Rodrigue (until 15:40) (Room 203)
14:00 Formulating adhesives with aminated polyolefins for low surface energy substrate - Ziyue Zhang (The University of British Columbia)   (Room 203)
14:20 CONFORMATIONAL RELAXATION OF STYRENE-BUTADIENE RUBBERS HAVING A DIFFERENT MICROSTRUCTURE BUT THE SAME COMPOSITION AT HYDROPHILIC AND HYDROPHOBIC INTERFACE - Mr Hidenobu Taneda (Center for Polymer Interface and Molecular Adhesion Science, Kyushu Univeristy)   (Room 203)
14:40 SHAPE MEMORY AND MECHANO-RHEOLOGICAL PROPERTIES OF AMINE CONTAINING POLYETHYLENE/POLYCAPROLACTONE BLEND - Jan Gustowski (University of British Columbia)   (Room 203)
15:00 Rheological Evaluation of Polyhydroxyalkanoates (PHAs) through Constitutive Equation Modelling - Ehsan Behzadfar (Toronto Metropolitan University)   (Room 203)
15:20 Development of Biodegradable and Antiviral Surgical Face Masks from Poly(lactic acid) and Poly(dimethyl siloxane)-based Polyhydroxyurethanes - Dr Georges Younes (Polytechnique de Montréal)   (Room 203)
14:00
Rheology in the Oil and Gas Industry - Ida Karimfazli (Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada) (until 15:40) (Room 200)
14:00 WALL-SLIP EFFECTS ON FLOW RESTART IN A PLUGGED WAXY CRUDE OIL PIPELINE - Dr Aniruddha Sanyal (National Institute of Technology Calicut)   (Room 200)
14:20 FLOW RESTART MECHANISM IN A MULTIPHASE GELLED PIPELINE - Dr Lomesh Tikariha (IIT Bombay)   (Room 200)
14:40 --- No talk scheduled ---
14:00
Suspensions and Colloids - Anthony Wachs (University of British Columbia) (until 15:40) (Room 147)
14:00 KEYNOTE: The Role of Rolling Resistance in the Rheology of Wizarding Quidditch Ball Suspensions - Sarah Hormozi (Cornell University)   (Room 147)
14:40 Adjuvanted silica suspensions: from particles contact properties to rheology - Xavier Chateau (ENPC, France)   (Room 147)
15:00 Rheology of High Performace Cement-Based Materials For Use in Additive Manufacturing - Nicos Martys (National Institute of Standards and Technology)   (Room 147)
15:20 EXPLORING THE INTERPLAY BETWEEN INTERPARTICLE FORCES, RHEOLOGY, AND TRIBOLOGY IN NANOCLAY-BASED NANOLUBRICANTS - Leonardo Martín Alarcón (University of Calgary)   (Room 147)
15:40 --- Coffee Break ---
16:10
Biomaterials and Biological Systems - Nicky Eshtiaghi (RMIT University) (until 17:50) (Room 104)
16:10 Reversal motion of E-coli bacteria in nematic liquid crystals - Dr Martyna Goral (Department of Mathematics, UBC, Vancouver, Canada and PMMH lab, ESPCI-PSL Paris, France)   (Room 104)
16:30 DIFFUSION OF LIPID NANOPARTICLES THROUGH AIRWAY MUCUS - Mohammad Reza Rokhforouz (UBC Chemical and Biological Engineering)   (Room 104)
16:50 Oscillatory microfluidic thromboelastograph (micro-TEG) analysis of whole blood coagulation and fibrinolysis - Prof. SeHyun ‍SHIN (Korea University)   (Room 104)
17:10 SCALE-DEPENDENT RHEOLOGY OF SYNOVIAL FLUID LUBRICATING MACROMOLECULES - Leonardo Martín Alarcón (University of Calgary)   (Room 104)
17:30 RHEOLOGY OF CORN STOVER SLURRIES UNDERGOING DILUTE-ACID PRETREATMENT - Prof. Joseph Samaniuk (Colorado School of Mines)   (Room 104)
16:10
Blends, Composites and Nanocomposites - Savvas Hatzikiriakos (The University of British Columbia) (until 17:50) (Room 203)
16:10 RHEOLOGY OF BIOCOMPOSITES - Denis Rodrigue   (Room 203)
16:30 How morphological and rheological properties of PLA/MWCNT nanocomposites are affected by molecular weight, stereo configuration of PLA, and processing - Prof. Pierre Carreau (Center for High Performance Polymer and Composite systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montreal, Québec, H3T 1J4, Canada)   (Room 203)
16:50 Compatibilized polylactide/polyamide 11 (PLA/PA11) blends containing multiwall carbon nanotubes: morphology, rheology, electrical and mechanical properties - Ms Zeinab Mousavi (Centre for High performance Polymer and Composite Systems (CREPEC), Chemical Engineering Department, Polytechnique Montreal, Montreal, Quebec H3T 1J4, Canada)   (Room 203)
17:10 WHY IS THE PYANE EFFECT MISSING HIGHER HARMONICS? - Prof. Xiaorong Wang (Tongji University)   (Room 203)
17:30 EFFECT OF INORGANIC FILLER ON RHEOLOGICAL PROPERTIES AND MORPHOLOGY OF POLYLACTIC ACID(PLA)/LOW-DENSITY POLYETHYLENE(LDPE) BLENDS - Min Chan Kim (Pusan National University (Republic of Korea))   (Room 203)
16:10
Rheology in the Oil and Gas Industry - Ergun Kuru (University of Alberta) (until 17:50) (Room 200)
16:10 KEYNOTE: Normal stresses at the yielding point - Prof. Paulo de Souza Mendes (PUC-Rio)   (Room 200)
16:50 Continuous Monitoring of Yield Stress and Solid Fraction of a Solid Suspension Using a Microfluidic Yield Rheometer - Mr Durgesh Kavishvar (University of Toronto)   (Room 200)
17:10 Hercshel-Bulkley parameter evaluation of oil-based drilling fluids - Prof. Arild Saasen (University of Stavanger)   (Room 200)
17:30 An algebraic thixotropic elasto-viscoplastic model for describing pre-yielding and post-yielding behaviour - Lalit Kumar (Indian institute of Technology Bombay)   (Room 200)
16:10
Suspensions and Colloids - Gwynn Elfring (University of British Columbia) (until 17:50) (Room 147)
16:10 KEYNOTE: Rheology of active colloids: motility-induced shear-thickening - Hartmut Löwen   (Room 147)
16:50 DENSITAXIS OF SWIMMING MICROORGANISMS - Vaseem Shaik (University of British Columbia)   (Room 147)
17:10 Hydrodynamic interactions of active matter near boundaries - Seyed Arman Abtahi   (Room 147)
17:30 DYNAMICS OF 2D COLLOIDAL CRYSTALS IN THE PRESENCE OF LOCALIZED INTERNAL STRESSES CREATED BY ACTIVE PARTICLES - Dr Jacob John (Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Canada)   (Room 147)
19:00
Poster Session (until 22:00) (The Sage)
19:00 Active Particles Crossing Sharp Viscosity Gradients - Jiahao Gong   (The Sage)
19:00 ADVANCES IN CONE-PLATE RHEOMETERS FOR BUSY LABS - David Moonay   (The Sage)
19:00 Dynamical behavior of an aqueous foam in a liquid-filled Hele-Shaw cell - Fatemeh Bararpour   (The Sage)
19:40 EFFECT OF THE TEMPERATURE ON THE RHEOLOGICAL BEHAVIORS OF LITHIUM-ION BATTERIES ANODE SLURRY - 예슬 김 (Sookmyung Women's University)   (The Sage)
20:00 Rheological differences in anode slurries caused by shape difference between natural and synthetic graphite - Yeeun Kim (Sookmyung Women’s University)   (The Sage)
20:20 TWO-STEP YIELDING BEHAVIOR OF CONCENTRATED LITHIUM-ION BATTERY ANODE SLURRY - Jun Dong Park (Sookmyung Women's University)   (The Sage)
20:40 JAMMING MECHANISMS OF DILUTE FIBRE SUSPENSIONS UNDER DEAD-END AND CROSS-FLOW CONDITIONS - Mr Miguel Esteban Villalba Chehab (The University of British Columbia)   (The Sage)
21:00 Diagnosing the state of the battery slurries using a machine learning technique - Seunghoon ­Kang   (The Sage)
21:20 Rheology and Drag Reduction and Engineering Applications of Novel Oil-phase Suspended Polyacrylamide Slicker water Fracturing Fluids - Mr Yongjun Lu (Petrochina Research Institute of Exploration and Development)   (The Sage)
21:40 Capillary imbibition in a diverging flexible channel - Mouad Boudina (University of British Columbia)   (The Sage)
21:40 Deformational Vorticity in Constitutive Equations: The Co-Rigid Rotational Maxwell Model - Cody Mischel   (The Sage)
21:40 DEVELOPMENT OF EXTENSIONAL RHEOMETER USING PARALLEL DISK RING - Mr Yukihiro Mineyama (National Institute of Technology, Tsuyama College, Advanced Mechanical and Control System Engineering Course)   (The Sage)
21:40 DYNAMIC VISCOELASTICITY AND SPINNING BEHAVIOR OF AN ORGANOGELATOR, PMDA-R, DISSOLVED IN VARIOUS OILS - Aya Kaide (Yamaguchi University)   (The Sage)
21:40 Effect of Asphaltene on the Rheological Properties of Bitumen - Jourdain Piette (UBC)   (The Sage)
21:40 EFFECT OF CARBON NANOTUBES (CNTs) DISPERSITY IN AG/POLYDIMETHYLSILOXAN (PDMS) COMPOSITE CONDUCTORS - EunHui Jeong   (The Sage)
21:40 EFFECTS OF RELAXATION TIME OF POLYMER SOLUTIONS ON THE SPATIO-TEMPORAL FLUCTUATION IN A TWO-DIMENSIONAL FLOW - Kengo Fukushima   (The Sage)
21:40 EVALUATION OF THE LIQUID HOLDUP IN A STRATIFIED GAS-LIQUID INCLINED PIPELINE ACCORDING TO THE HERSCHEL–BULKLEY FLUID MODEL - Prof. Jingyu Xu (Institute of Mechanics, Chinese Academy of Science)   (The Sage)
21:40 Gelatinization of Individual Starch Granules - Lanxin Mo (University of British Columbia)   (The Sage)
21:40 IMPACT OF EXTENT OF DIGESTION ON THE SHEAR RHEOLOGICAL BEHAVIOUR OF ANAEROBIC DIGESTED SLUDGE - Prof. Nicky Eshtiaghi (RMIT University, Australia)   (The Sage)
21:40 INFLUENCE OF VISCOSITY HIERARCHY ON DENSITY-UNSTABLE FLUID-FLUID DISPLACEMENT IN VERTICAL CONCENTRIC ANNULI - Maryam Ghorbani (PhD student)   (The Sage)
21:40 Measuring Transient Extensional Viscosity using Filament Stretching on an ARES G2 Rheometer - Tianhong Chen (TA Instruments - Waters LLC)   (The Sage)
21:40 Microrheology of Polyelectrolyte Solutions in the Semidilute Entangled Regime - Atsushi Matsumoto (University of Fukui)   (The Sage)
21:40 OPTIMIZATION OF THE DRAG-REDUCING EFFECT BY CONTROLLING THE PREPARATION CONDITIONS OF ADDITIVES - Takashi Saeki (Yamaguchi University)   (The Sage)
21:40 PREDICTICTING THE RATE OF CEMENT PLUG FAILURE - Scott Charabin (UBC)   (The Sage)
21:40 RHEOLOGICAL METHOD TO INVESTIGATE PSEUDOLAYER COMPRESSION ELASTIC CONSTANT AND THE DYNAMICS OF THE TWIST-BEND NEMATIC LIQUID CRYSTAL - mylapalli praveen kumar (University of Hyderabad)   (The Sage)
21:40 Rheology and Self-Assembly of Carboxylated Cellulose Nanocrystals - Ms Madeleine Hallman (Department of Chemical and Biological Engineering, University of British Columbia)   (The Sage)
12:10 --- Lunch ---
12:50
Plenary Presentations - Joung Sook Hong (until 13:50) (Room 100)
12:50 Coating process for battery electrode - Jaewook Nam (Seoul National University)   (Room 100)
14:00
Hiroshi Watanabe – Honorary Symposium -Dr Yumi Matsumiya (ICR, Kyoto University) (until 15:40) (Room 104)
14:00 VISCOELASTIC PROPERTIES OF BIDISPERSE LINEAR POLYMERS UNDER ELONGATIONAL FLOW - Prof. van Ruymbeke Evelyne (Bio and Soft Matter, UClouvain)   (Room 104)
14:20 Dual slip-link simulation study on stretch-orientation-induced reduction of friction in bi-disperse blends - Takashi Taniguchi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)   (Room 104)
14:40 Elongation viscosity of a poly(styrene-b-2-vinylpyridine) block copolymer forming spherical microphage-separated structure - Yuya Doi (Nagoya University)   (Room 104)
15:00 Primitive chain network simulations for non-linear rheology of monodisperse polystyrene melts with friction change and violation of the fluctuation-dissipation theorem. - Prof. Yuichi Masubuchi (Nagoya University)   (Room 104)
15:20 UNIVERSALITY OF POLYMER MELTS - quan chen (Changchun institute of applied chemistry chinese academy of science)   (Room 104)
14:00
Non-Newtonian Fluid Mechanics and Stability - Shinji Tamano (until 15:40) (Room 200)
14:00 KEYNOTE: COMPUTATIONAL ROD CLIMBING AND DIPPING DEPENDENT UPON NORMAL STRESSES - Youngdon Kwon   (Room 200)
14:40 Alignment of wormlike micelles under shear flow: Comparison with polymers - Yusuke Koide (Osaka University)   (Room 200)
15:00 MOLECULAR DYNAMICS SIMULATION OF THE BEHAVIOR OF THIN LUBRICATION FILM - Dongjie Liu   (Room 200)
15:20 Effect of viscosity contrast in structure -rheology relationship in sheared lamellar mesophase in 3-D - Arkaprava Pal (IISc Bangalore)   (Room 200)
14:00
Self-assembly and Flow-induced Systems/Gels - Quan Chen (Changchun Institute of Applied Chemistry Chinese Academy of Science) (until 15:40) (Room 203)
14:00 Simulation of Competition between Reaction and Relaxation in Gelation Kinetics - Takashi Uneyama (Nagoya University)   (Room 203)
14:20 Quantifying the Enhancement Effect of Strain Induced Crystallization on Tearing Energy by Edge Crack Test Method - Katsuhiko Tsunoda   (Room 203)
14:40 REVEALING THE CORRELATION BETWEEN STRAIN-INDUCED CRYSTALLIZATION AND LOCAL STRAIN FIELD AROUND THE CRACK-TIP OF NATURAL RUBBER - Dr Thanh-Tam MAI (​​Kyoto University, Kyoto, Japan)   (Room 203)
15:00 Cluster formations of terminal groups of polyisoprenes in natural rubbers: Molecular dynamics simulation study - Dr Taniguchi Takashi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)   (Room 203)
15:20 DIVERCITY IN STRAIN-INDUCED CRYSTALLIZATION OF NATURAL RUBBER BY BIAXIAL ELONGATION - Shinichi Sakurai   (Room 203)
14:00
Suspensions and Colloids - Hartmut Löwen (until 15:40) (Room 147)
14:00 KEYNOTE: Shear thickening in dense suspensions of rigid rods - George Petekidis (IESL-FORTH, Crete, Greece)   (Room 147)
14:40 Flow-induced structural change of cathode slurry during storage and its mechanism - Mr Jeong Hoon Park (School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Korea)   (Room 147)
15:00 PRACTICAL RHEOMETRY FOR SUSPENSIONS AND OTHER FUN COMPLEX SYSTEMS - David Moonay   (Room 147)
15:20 YIELD AND FLOW IN AGGREGATED PARTICULATE SUSPSENSIONS IN WATER - Dr Anthony Stickland (The University of Melbourne)   (Room 147)
15:40 --- Coffee Break ---
16:10
Hiroshi Watanabe – Honorary Symposium - Tadashi Inoue (Osaka University) (until 17:50) (Room 104)
16:10 RHEO-DIELECTRIC BEHAVIOR OF UNENTANGLED POLY (BUTADIENE OXIDE) UNDER STEADY SHEAR - Dr Yumi Matsumiya (ICR, Kyoto University)   (Room 104)
16:30 EXPERIMENTAL STUDY ON PHASE SEPARATION DYNAMICS OF UNENTANGLED POLYMER BLEND WITH DYNAMIC ASYMMETRY - Dr Takeshi Sato (Institute for Chemical Research, Kyoto University, Kyoto, Japan)   (Room 104)
16:50 Simulation study of unentangled polymers under fast flow - Jun-ichi Takimoto   (Room 104)
17:10 Molecular Dynamics Simulations for Viscosity Growth and Conformations of Unentangled Polymers under Shear Flow - Takashi Uneyama (Nagoya University)   (Room 104)
17:30 --- No talk scheduled. ---
16:10
Non-Newtonian Fluid Mechanics and Stability - Li Xi (McMaster University) (until 17:50) (Room 200)
16:10 KEYNOTE: Psychorheology: toward understanding how we experience viscous and viscoelastic materials - Dr Jeffrey Martin (Johnson & Johnson Consumer Inc.)   (Room 200)
16:50 Modelling drop mobility on lubricated surfaces using a ternary free energy lattice Boltzmann algorithm - Dr Sirio Orozco-Fuentes (Northumbria University)   (Room 200)
17:10 Analysis of pulsatile flows of complex fluids in two-dimensional channels - Ms Nayeon Park (Seoul National University)   (Room 200)
17:30 Solving the closure problem for dilute polymer solutions - Prof. Santosh Ansumali (Jawaharlal Nehru Centre for Advanced Scientific Research)   (Room 200)
16:10
Self-assembly and Flow-induced Systems/Gels - Kenji Urayama (until 17:50) (Room 203)
16:10 KEYNOTE: Relationships between viscoelastic relaxation and network connectivity in transient networks with well-controlled network structures - Takuya Katashima (The University of Tokyo)   (Room 203)
16:50 Phantom chain simulations for tetra and tri-branched networks - Prof. Yuichi Masubuchi (Nagoya University)   (Room 203)
17:10 Negative energy elasticity in polymer gel elasticity - Takamasa Sakai (The University of Tokyo)   (Room 203)
17:30 Universal Equation of State of Osmotic Pressure for Polymer Gels - Mr Takashi Yasuda (The University of Tokyo, Japan)   (Room 203)
16:10
Suspensions and Colloids - Chaimongkol Saengow (until 17:50) (Room 147)
16:10 INFLUENCES OF SHAPE OF MOLECULAR WEIGHT DISTRIBUTION ON TENSILE PROPERTIES OF POLYETHYLENE SOLIDS - Takumitsu Kida (Japan Advanced Institute of Science and Technology)   (Room 147)
16:30 LINKING MULTISCALE RHEOLOGY TO PERFORMANCE OF HIERARCHICALLY STRUCTURED PEM FUEL CELL CATALYST LAYER - Min-Hyung Markus Lee (University of Calgary)   (Room 147)
16:50 Inertial flow of immersed elastic capsules through a corner - Damien Huet   (Room 147)
17:10 Slip Behaviour and Thixotropy of Kaolinite and Mature Fines Tailings - Jourdain Piette (UBC)   (Room 147)
17:30 Z-SHAPED DEJAMMING PHASE DIAGRAM OF COLLOIDAL GELS - Mr Bin Xia (Tongji University)   (Room 147)
18:00
Social Events (until 19:30) ()
19:00
Social Events (until 22:00) ()
12:10 --- Lunch break ---
14:00
Emulsions, Foams and Bubbles - Arun Ramachandran (University of Toronto) (until 15:40) (Room 147)
14:00 KEYNOTE: Squeezing of a concentrated emulsion with surfactant through a periodic porous medium - Alexander Zinchenko (University of Colorado Boulder)   (Room 147)
14:40 The effect of surface viscosity on droplet breakup and relaxation under extensional flow - Prof. Vivek Narsimhan (Davidson School of Chemical Engineering Purdue University)   (Room 147)
15:00 Flow and instability induced by bubbles rising in a two-layer fluid system - Marjan Zare (University of British Columbia)   (Room 147)
15:20 DYNAMICS AND MIXING OF TRAPPED DROPLETS - Gesse Roure (University of Colorado Boulder)   (Room 147)
14:00
Non-Newtonian Fluid Mechanics and Stability - Ian Frigaard (University of British Colubia) (until 15:40) (Room 200)
14:00 GAS PROPAGATION THROUGH POROUS MEDIA FILLED WITH YIELD-STRESS FLUID - Ali Pourzahedi   (Room 200)
14:20 Localization of stirring flows: the effect of the yield stress - Mohammad Reza Daneshvar Garmroodi (Concordia University)   (Room 200)
14:40 Thin-film flow of a Bingham fluid over topography with a temperature dependent rheology - Miguel Moyers   (Room 200)
15:00 Damping of surface waves by a floating viscoplastic plate - Xuemeng Wang (University of British Columbia)   (Room 200)
15:20 --- No talk scheduled. ---
14:00
Polymer Solutions and Melts - Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University) (until 15:40) (Room 104)
14:00 ADVANCED POLYMER RHEOLOGY BASED ON RHEO-OPTICAL TOOLS AND A DUAL MOTOR DEVICE - Joerg Laeuger (Anton Paar Germany)   (Room 104)
14:20 UNIVERSAL DIFFUSION OF DENDRIMERS IN SEMIDILUTE SOLUTIONS OF LINEAR POLYMERS - Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University)   (Room 104)
14:40 The Effect of the Solvent Dielectric Constant on the Conformation and Dynamics of Polyelectrolytes in Solution - Atsushi Matsumoto (University of Fukui)   (Room 104)
15:00 RECENT ADVANCES IN POLYMER VISCOELASTICITY FROM GENERAL RIGID BEAD-ROD THEORY - Prof. Alan Jeffrey Giacomin (Queen's University)   (Room 104)
15:20 Improvement of Heat Resistance using Physical Aging in Polystyrene Injection Moldings - Mr Kosaku Tao (1;Osaka Research Institute of Industrial Science and Technology. 2;Depertment of Material Science, School of Engineering, University of Shiga Prefecture.)   (Room 104)
14:00
Self-assembly and Flow-induced Systems/Gels - Takuya Katashima (The University of Tokyo) (until 15:40) (Room 203)
14:00 Effect of salt concentration and flow rate on clogging dynamics in the single micro-pore - Dae Yeon Kim (Seoul National University (SNU))   (Room 203)
14:20 Star-polymer-DNA gels showing predictable stress relaxation behavior - Xiang Li (Hokkaido University)   (Room 203)
14:40 OBSERVATION OF FLOW BIREFRENGENCE IN DYNAMIC SQUEEZE FLOW - Manabu Kato (National Institute of Technology, Tsuyama College)   (Room 203)
15:00 SAXS, SANS and Spectroscopy Study on High Tunability of a Block Copolymer by Strongly Selective Solvents - Prof. Shigeru Okamoto (Nagoya Institute of Technology)   (Room 203)
15:20 --- No talk scheduled ---
16:15
Social Events (until 18:30) (Gage Towers)
16:15 --- First bus ---
17:00 --- Second bus ---
17:35 --- Last bus ---
18:30
Social Events (until 22:30) ()
12:00
Closing Remarks (until 12:30) (Room 100)
12:30
Social Events (until 13:30) (Mathematics & Geography Buildings)
Powered by Indico v3.3.3-pre