Name: ICEC29/ICMC2024
Start: 2024-07-22T08:00:00+02:00
End: 2024-07-26T17:00:00+02:00
Location: CICG - GENEVA, Switzerland

2 K system exergetic optimisation and helium recovery system for FCC-ee (in session "Wed-Po-2.5")

100 K Cooling Performance of a Modified Collins Cycle Cryocooler for In-space Applications (in session "Tue-Or2")

A 15 W@76.8 K lightweight Pulse Tube Cryocooler operating at 100 Hz (in session "Wed-Po-2.3")

A 150 K High Frequency Micro Pulse Tube Cryocooler (in session "Wed-Po-2.3")

A Boiloff Calorimetry Test Configuration for the Characterization of Thermal Insulation Systems in Flammable Background Gasses (in session "Wed-Po-2.2")

A comparative study of rapid chill-down technologies in cryogenic applications (in session "Thu-Po-3.1")

A Comprehensive Overview of Gravity Measurement Utilizing a SQUID (in session "Thu-Po-3.1")

A Data-Driven Approach for Modelling the Relationship between Fabrication Parameters and Critical Currents of REBCO Coated Conductors in a Real-Scale Pulsed Laser Deposition System (in session "Wed-Or12")

A GUI Based Property Package for Thermo-physical Properties of Cryogenic Fluids (in session "Thu-Po-3.4")

A helium isotope separation device with flow visualization unit (in session "Tue-Po-1.3")

A helium isotope separation system with an optimized entropy filter (in session "Thu-Po-3.5")

A high efficiency single-stage 30 K pulse tube cryocooler (in session "Wed-Po-2.3")

A hybrid 3He Joule-Thomson cryocooler using a spiral flow channel evaporator for space applications (in session "Thu-Po-3.1")

A new 3-omega technique for the measurement of thermal conductivity and diffusivity of cryogenic helium and hydrogen and their mixtures (in session "Tue-Or5")

A new cryogenic test facility for superconducting magnets at IMP (in session "Wed-Po-2.6")

A preliminary experimental study on thermal stratification in horizontal cylindrical cryogenic liquid storage vessels (in session "Wed-Or11")

A REBCO coating process for high-field applications (in session "Wed-Or12")

A review on determining the equilibrium ortho-parahydrogen ratio (in session "Tue-Po-1.6")

A single-stage high frequency 40K pulse tube cryocooler (in session "Wed-Po-2.3")

A study of an LNG cold energy cascade utilization system coupled with liquid air energy storage (in session "Wed-Po-2.1")

A study on hydrogen liquefaction coupled with liquid air energy storage (in session "Wed-Po-2.1")

A study on the scheme of cold energy recovery for compensating liquefaction in liquid hydrogen energy storage (in session "Tue-Po-1.6")

A thermal hydraulic evaluation method of toroidal field superconducting magnet for China’s next generation fusion reactor (in session "Tue-Or4")

A thermodynamic analysis of a coupled LAES system for recycling liquid ethylene cold energy (in session "Tue-Po-1.1")

A user-tuneable heat link for use at temperatures below 4K (in session "Thu-Po-3.1")

Acoustic Emission Analysis of Tensile Damage in Porous Carbon Fiber Composite Laminates from 20 K to 300 K (in session "Wed-Po-2.2")

Adhesion analysis of resin impregnation systems in superconducting magnets (in session "Tue-Po-1.4")

Advanced Composite Insulation Systems for Niobium-Tin Superconducting Magnets: Electrical Characterization of Laminates at Cryogenic Temperatures (in session "Tue-Po-1.4")

Advancements in cryogenic cable harness technology: Enabling connectivity for extreme-temperature environments in space and earthbound missions (in session "Thu-Or14")

Advancing Superconductor Technology for High-Field Applications: Current State and Emerging Trends (in session "Tue-Pl-2")

An economic analysis of a coupled LAES system utilizing the regasification cold energy of liquid ethylene (in session "Tue-Po-1.1")

An experimental analysis of flow and mass transfer characteristics of cryogenic liquid nitrogen and oxygen countercurrent on the structured packing (in session "Thu-Or18")

Analysis and optimization of helium liquification process utilizing the turbo Brayton refrigerator as the pre-cooling stage (in session "Thu-Po-3.3")

Analysis of combined air-breathing and rocket engine for single stage to orbit vehicle (in session "Wed-Po-2.4")

Analysis of fault current limiting performance of resistive-type hybrid SFCL for parallel operation of distribution transformers (in session "Thu-Po-3.2")

Analysis on sealing performance of piston rings used in the liquid hydrogen pump (in session "Wed-Po-2.1")

Analytical investigation and experimental validation of thermal & AC characterization of HTS Tape for modular superconducting fault current limiter (in session "Thu-Or15")

Analytical model for the calculation and optimisation of cryogenically cooled current leads and wire interconnects (in session "Thu-Po-3.1")

ANN-CFD synergistic approach for improved predictions of pressure evolution in non-venting self-pressurized liquid hydrogen tanks (in session "Tue-Po-1.6")

Application, development and future of helium compressor in large-scale cryogenic engineering (in session "Thu-Po-3.3")

Assembly process and quality control of the magnet cryostats for the HL-LHC project at CERN (in session "Wed-Po-2.6")

Automated operation modes for the ESS cryogenic moderator system (in session "Thu-Po-3.3")

Automation of Superconducting Cavity Cooldown Process Using Two-Layer Surrogate Model and Model Predictive Control Method (in session "Wed-Po-2.4")

Behaviour of superconducting coils inside the sub-cooled water ice (in session "Tue-Or3")

C400 – 10 K remote helium cooling loop for ions carbon cyclotron application (in session "Wed-Or10")

Can Stainless Steel Meet the Challenges of Future Cryogenic Engineering Systems? (in session "Wed-Or9")

Capacitance-based mass flow rate measurement of 2-phase hydrogen in a ½ inch tube. (in session "Wed-Po-2.4")

Carbon fiber composites with cryogenic hydrogen-barrier property for liquid hydrogen storage tanks (in session "Tue-Po-1.4")

Carbon Footprint of the Helium Recovery System at the ISIS Neutron and Muon Source (in session "Tue-Po-1.1")

CERN NEUTRINO PLATFORM CRYOGENICS, THE DARKSIDE-20K EXPERIMENT (in session "Thu-Or16")

CFD modelling of the non-isobaric evaporation of cryogenic liquids in storage tanks (in session "Wed-Po-2.1")

Characteristics of the Critical Current Capabilities of an Stepped Grooves Structure Superconducting Conductor with Stacked REBCO Tapes (in session "Thu-Po-3.6")

Characterization of XM-19 forge products at 4K for their use in fusion energy devices. (in session "Tue-Po-1.4")

Cold mass suspension system of a rotating gantry for medical applications. (in session "Thu-Po-3.2")

Commissioning and first results of an experimental setup for the characterization of cryogenic pulsating heat pipes (in session "Wed-Or10")

Commissioning of the Cryogenic control system for Cryomodules at ESS SRF Linac (in session "Wed-Po-2.4")

Commissioning of the cryogenic system of the HL-LHC Inner Triplet String test bench (in session "Tue-Or4")

Commissioning progress of the first cryoplant for SHINE accelerator (in session "Thu-Or16")

Comparative Analysis of Reed Switches and Hall Sensors at Cryogenic Temperatures: An Argument for a Cost-Effective Alternative for Cryogenic Applications (in session "Wed-Po-2.2")

Comparative study on the effects of isochoric cryopreservation and liquid nitrogen flash freezing on the quality of fish (in session "Thu-Po-3.2")

Computational Fluid Dynamic Studies of Miniature Pulse Tube Cryocoolers (in session "Tue-Po-1.2")

Conceptual design of a high intensity liquid ortho-deuterium moderator for the European Spallation Source (in session "Tue-Po-1.3")

Conceptual design of the cryogenic distribution system for the Shenzhen superconducting soft X-ray free electron laser (in session "Tue-Po-1.1")

Conceptual design of the Divertor Tokamak Test (DTT) Cryogenic System (in session "Wed-Po-2.5")

Conduction Cooling Test Facility for Superconducting Model Coils (in session "Thu-Po-3.5")

Conference Closing: Numbers, Acknowledgements and Next conference in Korea

Cooling system for the MEESST MHD heat flux and radio blackout mitigation HTS Magnet probe (in session "Wed-Or8")

Correlating growth rate with vortex pinning and defect microstructure in Transient Liquid Assisted Growth (TLAG) of superconducting REBCO film (in session "Wed-Or12")

Correlation between vortex pinning and defect landscape in TLAG -$YBa_2Cu_3O_{7-\delta}$ nanocomposite films (in session "Tue-Or3")

Cryo-Compressed Hydrogen Economic Analysis (in session "Tue-Po-1.6")

Cryocooler development for superconducting applications (in session "Thu-Po-3.5")

Cryocooler-based conduction cooling technology development for 1.3 GHz Nb3Sn superconducting radio frequency cavity (in session "Thu-Po-3.5")

Cryogenic architecture and heat loads for the High-Luminosity upgrade of the Large Hadron Collider at CERN (in session "Tue-Or1")

Cryogenic contact resistance and material conductivities in astronomic instrumentation: an experimental characterization. (in session "Thu-Po-3.4")

Cryogenic Developments for the Einstein Telescope (invited) (in session "Wed-Or7")

Cryogenic emissivity testing apparatus for insulating materials cooled by a cryocooler (in session "Thu-Po-3.4")

Cryogenic facility set up for superconducting accelerator magnets and power transmission lines at INFN (in session "Thu-Po-3.2")

Cryogenic H2 for heavy-duty trucks: applying fundamental thermodynamics to solve clean transportation challenges (in session "Thu-Or17")

Cryogenic helium valves deflection and relaxation in ESS linac cryogenic distribution system (in session "Thu-Or13")

Cryogenic liquid propellant densification system using multiple ejectors (in session "Thu-Po-3.1")

Cryogenic options for future accelerators: case study for the Muon Collider ring (in session "Tue-Or4")

CRYOGENIC SYSTEM FOR THE HIGH ENERGY PHOTON SOURCE AT IHEP (in session "Wed-Po-2.5")

Cryogenic Tests of an Airborne Liquid Hydrogen Tank for a Manned Aircraft In the HEAVEN Project (in session "Wed-Or8")

Cryogenic thermoelectric coolers with different passive branches (in session "Tue-Po-1.2")

Cryogenics for Future Hydrogen Infrastructure (in session "Wed-Pl-3")

Cryogenics for power and energy: a winning ticket? (in session "Thu-Pl-6")

Cryogenics for Quantum Computer : Upscale challenges (in session "Wed-Or7")

Cryopumps applied to Fusion Energy - MAST-U Enhancements Double Beam Box System (in session "Tue-Po-1.5")

Cryostats for the HL-LHC magnets: Pre-series production, assembly infrastructure and project plans (in session "Wed-Po-2.6")

Customized hydrogen liquefier system for applications up to 50 kg per day (in session "Wed-Or11")

Demonstration of a novel electro-chemical hydrogen refrigerator (in session "Tue-Or6")

Design and Development of Cryogenic Dewar (in session "Tue-Po-1.5")

Design and application of HTS magnet for magneto-hydro-dynamic plasma shielding in radio blackout and heat flux mitigation experiments (in session "Wed-Or9")

Design and Commissioning of a Medium-Scale Hydrogen Liquefaction Plant (in session "Wed-Po-2.1")

DESIGN AND COMMISSIONING OF THE NITROGEN CRYOGENIC SYSTEM FOR THE HEPS (in session "Thu-Po-3.5")

Design and construction at CERN of an enhanced thermal conductivity measurement setup in the temperature range of 1.8 K to 50 K (in session "Tue-Po-1.3")

Design and Electromechanical Properties of HTS Twisted Stacked-Tape Conductor with Three Stepped Slots (in session "Thu-Po-3.6")

Design and optimization of the cryogenic structure of the concentric high temperature superconducting cable joint (in session "Thu-Po-3.2")

Design and Performances of a Table-Top 500 mK Cryostat for a 100 Spin-Qubits Quantum Computing Application (in session "Thu-Po-3.1")

Design and Performances of an Optical Cryostat at 2 K (in session "Thu-Po-3.1")

Design and progress of the helium refrigeration system for CRAFT superconducting magnet test facility (in session "Wed-Or7")

Design and test of a 10 MJ hybrid high-temperature superconducting magnetic energy storage module (in session "Tue-Or4")

Design methodology of a Mixed Refrigerant Joule-Thomson (MRJT) cryocooler (in session "Tue-Po-1.2")

Design of a 10 ton/day air liquefaction system for liquid air energy storage (in session "Thu-Po-3.3")

Design of a cryogenic test platform for CICC cooled by superfluid helium forced flow (in session "Wed-Po-2.6")

Design of a moving magnet type free piston Stirling cryocooler for futuristic space application (in session "Wed-Po-2.3")

Design of a multipurpose test facility (MTF) for HTS cables (in session "Tue-Po-1.4")

Design of cold box for air liquefaction with capacity of 10 ton/day (in session "Thu-Po-3.3")

Design of the cryogenic system of the CYCIAE-2000 MeV superconducting magnet (in session "Wed-Po-2.6")

Design optimization and heat transfer characteristics of multilayer insulation structures for liquid hydrogen tanks (in session "Wed-Or11")

Design study of a superconducting dipole magnet with active shielding for a heavy-ion rotating gantry (in session "Wed-Po-2.6")

Design, Fabrication, and Characterization of an Interdigitated Micro-Capacitive Level Sensor Coupled with Signal Conditioning Circuit (in session "Wed-Po-2.4")

Design, implementation, and preliminary testing of the interlocks and safety functions for the CMDS (cryomodule and cryogenic distribution system) master system at the European Spallation Source ERIC (in session "Thu-Po-3.2")

Design, installation and commissioning of the cryogenic system for NNBI test facility (in session "Wed-Po-2.5")

Design, measurements and calculation model validation of the orifice-type flowmeter for FAIR SIS100 Local Cryogenic System (in session "Wed-Po-2.4")

Designing high Cr-alloy Eurofer with advanced properties by cryogenic processing for fusion (in session "Tue-Or3")

Detailed study of the cryogenic jumper connections between the cryogenic distribution line and the superconducting magnets of the High Luminosity LHC upgrade at CERN (in session "Wed-Po-2.6")

Development and Commissioning of 1KW @ 4.5K Cryogenic System for Superconducting Test Facility of CRAFT (in session "Wed-Po-2.5")

Development and experimental validation of a versatile test bench for thermal contraction measurements down to 1.8 K (in session "Wed-Po-2.2")

Development and performance test of a cryogenic environment simulation facility for building elements (in session "Wed-Po-2.5")

Development and testing of the internal sliding support for the Cryogenic Distribution Line for the HL-LHC (in session "Wed-Po-2.6")

Development of 4K-GM cryocooler and its applications for superconducting magnets (in session "Wed-Pl-4 (Mendelsson Award winner)")

Development of a 2 kW Class Two-Stage Cascade Type Mixed Refrigerant Joule-Thomson Refrigerator for Semiconductor Etching Process with Cooling Temperature Below -100℃ (in session "Tue-Po-1.2")

Development of a cryogen-free test cryostat for a superconducting CCT short magnet (in session "Thu-Po-3.5")

Development of a cryogenic detection chain for low field MRI (in session "Thu-Or18")

Development of a Hardware-In-the-Loop (HIL) simulation system for a 3000L/h helium liquefier (in session "Thu-Po-3.3")

Development of a high efficiency micro pulse tube cryocooler for 80 K (in session "Tue-Or2")

Development of a high-capacity single-stage 20K GM cryocooler (in session "Thu-Po-3.5")

Development of a lab-scale hydrogen liquefaction system (in session "Wed-Or11")

Development of a Machine Learning-Based Model for Cryogenic Film Boiling Flow Pattern Prediction During Transfer Line Chill-Down Operation (in session "Thu-Po-3.4")

Development of a remote cooling system for detector magnet current leads using a single-stage GM cryocooler (in session "Tue-Or2")

Development of an adsorption dehumidification system to supply dry air for the cryogenic refrigerator (in session "Wed-Po-2.4")

Development of Cold Box for Upgradable Helium Refrigerator Plant of 200W at 4.5 K (in session "Thu-Po-3.3")

Development of cryogenic cooling system for low emission future aircrafts (in session "Thu-Po-3.1")

Development of EPICS-based control system for RAON SCL2 cryogenic system (in session "Wed-Po-2.4")

Development of Glass Fiber Composite Axial Insulating Cryogenic Vacuum Barrier for Superconducting Feeders of SST-1 Tokamak (in session "Tue-Or6")

Development of high-performance cryocoolers capable of operating from 120 K down to 5 mK (in session "Tue-Or2")

Development of the 4 K G-M assisted J-T cooler with off-the-shelf mini compressor (in session "Tue-Po-1.2")

Development of the Control System for the ESS Cryogenic Moderator System (in session "Wed-Po-2.4")

Development of two-stage Stirling cooler for simultaneous cooling at 100 K and 50 K (in session "Thu-Po-3.5")

Development of whole-body cryochambers based on a mixed-gases Joule-Thomson refrigeration cycle (in session "Thu-Po-3.2")

Development status of a NbTi conduction-cooled superconducting quadrupole magnet combined with dipole correctors for the ILC main linac (in session "Wed-Po-2.6")

Developments in liquid hydrogen on-board systems and ground-based infrastructures for sustainable aviation (in session "Wed-Or8")

Dielectric and thermal performance of insulation systems for quench heaters for the protection of superconducting magnets (in session "Tue-Po-1.4")

Dynamic modelling of catalyzed vapor cooled shield for accelerated chill down of a liquid hydrogen tank during refilling. (in session "Tue-Po-1.6")

Dynamic temperature variation of insulation materials for solid-phase cold storage tank of liquid air energy storage (in session "Tue-Po-1.5")

Effect of irradiation in ambient air and in liquid helium on the mechanical properties of SLA and FDM 3D printed high performance polymers (in session "Tue-Po-1.4")

Effect of metamaterial engineering on the superconductive properties of ultrathin layers of NbTiN (in session "Tue-Or3")

Effect of operating parameters on step piston type pulse tube refrigerator (in session "Tue-Or2")

Effect of thermal contact between gas-cooled REBCO conductors on hot-spot temperature in fusion magnets (in session "Wed-Po-2.6")

Effects of the adhesions between impregnation system and coil components on the training of Nb3Sn Rutherford cables (in session "Wed-Or12")

Efficiency increase of cryoplants by retrofitting with state-of-the-art turbine technology (in session "Thu-Po-3.3")

Electrical capacitance volume sensor for microgravity mass gauging: advancements in sensor calibration for microgravity fluid configurations and propellant management devices (in session "Thu-Or14")

Electrification of Aviation Propulsion – Cryogenic Technologies that enable the Next Generation of Propulsion Systems (in session "Thu-Pl-5")

Enhancing liquid air energy storage efficiency through integration with LNG: comparative analysis of cold energy recovery methods (in session "Tue-Po-1.1")

EU-DEMO TFC WP4 current discharge thermohydraulical analyses and models: impacts of radial plates on operation domain with safety consideration. (in session "Wed-Po-2.4")

Evaluating Fluid-Induced Vibrations in Sorption-Based JT Coolers (in session "Wed-Po-2.3")

Evaluation of vibration characteristics of a 1.5W 4K pulse tube cryocooler with improved first stage cooling capacity (in session "Wed-Po-2.3")

Evaluation on the operational state of turboexpanders in a helium refrigerator for nuclear fusion experimental devices using principal component analysis (in session "Tue-Po-1.5")

Experimental and numerical study of a modified condensation-driven dilution refrigerator (in session "Tue-Po-1.2")

Experimental and theoretical investigation on avoiding freezing phenomena of Printed Circuit Heat Exchanger for cryogenic liquid hydrogen vaporizer (in session "Wed-Po-2.1")

Experimental and theoretical investigation to study pressure drop in regenerators (in session "Tue-Po-1.2")

Experimental characterization of a compact centrifugal pump for liquid helium transfer (in session "Tue-Po-1.5")

Experimental improvements to the acoustic expander with applications to cryogenic refrigeration (in session "Tue-Or6")

Experimental investigation and performance prediction of cryogenic temperature sensor for cryogenic rocket engine using artificial intelligence techniques (in session "Thu-Po-3.1")

Experimental investigation of 1,300 L zero-boil-off (ZBO) liquid hydrogen storage tank (in session "Wed-Po-2.1")

Experimental investigation of a cryogenic printed circuit heat exchanger (in session "Thu-Or13")

Experimental investigation of a dual flow transfer system for liquid helium (in session "Wed-Po-2.4")

Experimental investigation of a helium sorption cooler operating below 1 K (in session "Tue-Or2")

Experimental Investigation of Continuous Ortho-Para Hydrogen Conversion for Hydrogen Liquefaction within the Range of 40-80 K (in session "Thu-Or17")

Experimental optimization of phase for a 20K thermal-coupled two-stage high-frequency pulse tube cryocooler (in session "Wed-Po-2.3")

Experimental research on heat transfer performance of low temperature support structure (in session "Tue-Po-1.3")

Experimental Study of a Coupled Stirling Generator-Pulse Tube Cryocooler System Driven by a Stirling Engine (in session "Tue-Po-1.2")

Experimental study of a Dilution Refrigeration Unit for space applications (in session "Tue-Po-1.2")

Experimental study of a novel coaxial annular tube convective heat switch (in session "Wed-Po-2.2")

Experimental study of a single-stage adiabatic demagnetization refrigerator (in session "Tue-Po-1.2")

Experimental study of cryogenic fluid flow in porous thermal insulation materials (in session "Wed-Or11")

Experimental study of enhanced cryogenic cool-down performance in metal pipe with polymer coating on the inside (in session "Thu-Po-3.4")

Experimental study of silver powder sintering for optimization of sintered heat exchanger in dilution refrigerator (in session "Thu-Po-3.5")

Experimental study of the thermo-hydraulic performance of 3-stream plate-fin heat exchanger (in session "Tue-Po-1.5")

Experimental study on a 1.3 W@4.2 K GM type pulse tube cryocooler (in session "Tue-Po-1.2")

Experimental study on the thermal performance of printed circuit heat exchangers used for liquid hydrogen fueling stations (in session "Wed-Or11")

Exploring 19 years of operating a superconducting wiggler at the Canadian Light Source (in session "Tue-Po-1.4")

Fabrication of Intrinsic Josephson Junction Devices using Hydrogen-Atmosphere Treatment (in session "Tue-Po-1.3")

Fabrications and superconducting properties of Ba1-xKxFe2As2 composite round wires (in session "Wed-Or12")

Failure analysis for liquid helium leaking to the vacuum envelope of the cryogenic distribution system of the ESS superconducting linac (in session "Tue-Po-1.1")

Fatigue strength properties of SS304 at cryogenic temperatures (in session "Tue-Po-1.4")

FCC-ee cavities RF power coupler: study on the optimal cooling strategy to boost the cryomodule energy efficiency. (in session "Thu-Or18")

Feasibility Study of Rayleigh Backscattering Optical Fibre Strain Measurement Technique for Determining the Thermal Expansion of Lightweight Composite Structures (in session "Wed-Po-2.2")

Feasibility study on isothermal storage of two cryogens in a single tank with a metal common bulkhead (in session "Wed-Or8")

Field-induced phase transition, weak ferromagnetism, and metamagnetic transition in the underdoped PrBCO cuprate (in session "Thu-Po-3.6")

First commissioning of the ESS cryogenic moderator system using nitrogen and helium (in session "Thu-Or17")

First Cool Down and Heat Load Measurements in the DALS Cryomodule Test Bench (in session "Wed-Or7")

First operation of the cryo supply for Wendelstein 7-X cryo vacuum pumps (in session "Wed-Po-2.5")

First-Year Operation Overview of the SLAC LCLS-II Cryoplant (in session "Tue-Or1")

Flow characteristics of cryogenic perforated plate balanced flowmeter (in session "Thu-Or13")

Flywheel type uninterruptible power supply using high temperature superconducting induction machine (in session "Thu-Po-3.2")

GFK-Cryostat for a Cryogenic Current Comparator (in session "Tue-Po-1.3")

Heat Dissipation induced by Microvibrations in Low Temperature Systems (in session "Thu-Po-3.1")

Heat load measurements of XFEL cryomodules using the helium evaporation method (in session "Wed-Or7")

Heat transfer and thermodynamic stability study of a self-sustained vertical cooling loop in He I and He II (in session "Tue-Or6")

Heat transfer and vapor behavior on microstructure surface in liquid nitrogen for application to cryopreservation of living cells (in session "Thu-Or18")

Heat transfer characteristics analysis of the large-scale cold storage solution based on moving bed (in session "Thu-Po-3.4")

Heat transfer study on cryogen evaporation in stationary and moving tank (in session "Wed-Po-2.1")

HIE ISOLDE CRYOGENIC OPERATION RESULTS AND RECENT UPGRADES (in session "Wed-Po-2.5")

High-gradient magnetic separation for wastewater treatment based on direct-conduction cooling superconducting magnets with large diameter, room temperature aperture (in session "Wed-Po-2.6")

ICEC course 1 "Cryostats for Accelerator Superconducting Devices"

ICEC course 2: "Cryocooler based cooling options, from principles to performance, to system integration"

ICMC course 1 "Materials selection for cryogenic applications"

ICMC course 2: "Cryogenic Materials & Magnet Technology for High Energy Physics Detectors"

Impact of cold finger geometry on low temperature pule tube cooler performances (in session "Thu-Po-3.1")

Impact of hydrogen embrittlement on cryogenic mechanical properties of 304 steel (in session "Wed-Or9")

Implementation and Enhancement of Safety Measures in SST-1 Cryogenic System at 77 K and 4.2 K (in session "Thu-Or18")

Improved Heat Transfer Prediction Methods in Channels for Natural Gas Liquefaction (in session "Tue-Or5")

Improvement in Jc of KIT-CERN (KC4) REBCO tapes through a study of growth defects (in session "Thu-Po-3.6")

In situ Mechanical Characterization of Hollow Specimens with Hydrogen and Helium Environments at Ambient and Cryogenic Temperatures (in session "Wed-Po-2.2")

Incorporating new subsystem into an existing cryogenic controls system (in session "Wed-Po-2.4")

Influence of room temperature pre-strain on cryogenic tensile properties of modified N50 austenitic stainless steel (in session "Wed-Po-2.2")

Innovative cryogenic systems for cooling superconducting wind turbine electrical generators in the 20-65 K temperature range (in session "Thu-Po-3.2")

Insertion thermometry experience at CERN (in session "Wed-Po-2.4")

Instrument Design for the Accelerator Cryogenic System (in session "Wed-Po-2.4")

Instrumentation selection for cryogenic HTS coil gamma irradiation at doses up to 10MGy (in session "Wed-Po-2.2")

Integrated design of an 18kW@4.5K/4kW@2K helium cryogenic refrigeration system for CiADS (in session "Thu-Po-3.3")

Investigate the effects of hydrogen-rich environment on the tensile properties of thermoplastic polymers for liquid hydrogen service (in session "Wed-Po-2.1")

Investigating the Electromechanical Performance of REBCO Tapes for High-Field Magnet Applications (in session "Thu-Po-3.6")

Investigation and optimization of the continuous and discrete heat exchangers in the mK dilution refrigerator for cooling superconducting quantum chips (in session "Tue-Po-1.2")

Investigation of a Helium cooling circulation loop on a 1.3 GHz cavity structure (in session "Wed-Or10")

Investigation of Liquid Nitrogen/Fluorocarbon Mixture for HTS Apparatus (in session "Thu-Po-3.2")

Investigation of Structure Effects on Jet Impingement and Energy Recovery in Miniature Open-cycle Joule-Thomson Cryocoolers (in session "Wed-Or10")

Investigation of the emittance properties of multilayer insulation used in cryogenic applications (in session "Thu-Po-3.6")

Investigation of the influence of residual strain of epoxy resin on critical current of HTS tape by using fiber Bragg grating sensors (in session "Wed-Po-2.6")

Investigation of the stand-alone cryomodule for the 3rd harmonic cavity of the synchrotron light source (in session "Thu-Po-3.5")

Investigation on Efficient Cooling Methods for Cryogenic Fluid Pipelines (in session "Wed-Or8")

Investigation on multi-stage centrifugal cold compressors in superfluid helium cryogenic system (in session "Tue-Po-1.5")

Investigation on the dynamic response of aerostatic bearings-rotor system with different bearing gas (in session "Tue-Po-1.5")

Isothermal Discharge Current and Trap Characteristics of Epoxy Resin at Low Temperature (in session "Tue-Po-1.4")

LBNF/DUNE nitrogen refrigeration system update (in session "Thu-Po-3.3")

LCLS-II LINAC 2.0 K COMMISSIONING (in session "Tue-Or1")

LCLS-II LINAC 2K Pump-down and Controls Automation (in session "Thu-Or14")

LCLS-II LINAC Cooldown Automation (in session "Tue-Or1")

LHC cryogenics and helium management in case of a major power outage (in session "Wed-Po-2.6")

Liquid helium level sensors on a PCB carrier with integrated temperature reading (in session "Wed-Po-2.4")

Low Temperature Hybrid Graphene-Silicon Charge Amplifier (in session "Wed-Po-2.2")

Low temperature technologies for accelerators and detectors at CERN (in session "Tue-Pl-1")

Machine Learning Framework for Anomaly Detection and Maintenance Optimization in Large-Scale Cryogenic Systems (in session "Tue-Po-1.3")

Magnetocaloric alloys for active magnetic regenerative refrigeration (in session "Tue-Po-1.2")

Measurement and control architecture of research cryostats (in session "Thu-Or14")

Measurement of critical current irreversibility limits on ReBCO tapes for mechanical axial tensile and compressive strain (in session "Tue-Po-1.4")

Measurements on the catalytic ortho-parahydrogen conversion using hydrous ferric oxide (in session "Thu-Or17")

Mechanical and physical properties of AlMgSc-alloy developed for cryogenic temperature applications (in session "Tue-Po-1.4")

Mechanical design of a superconducting magnet for gravity compensation (in session "Wed-Or10")

Mechanical design of the multi-channel liquid helium cryogenic transfer lines (in session "Wed-Po-2.6")

Mechanical strength and stability of bulk insulation materials: A study on hollow glass microspheres and expanded perlite. (in session "Tue-Po-1.4")

Mesoscopic Numerical Study of Cryogenic Bubble Generation and Liquid-Vapor Interface Movement in Microgravity (in session "Tue-Or5")

Mismatch and retention time analysis of cryo-DRAMs down to 4 K (in session "Wed-Po-2.2")

MITICA Cryoplant (in session "Thu-Po-3.3")

Mixed-refrigerant cooled 10 kA current leads for superconducting applications (in session "Tue-Po-1.3")

Model and dynamic simulation of the liquid hydrogen distribution by trailer (in session "Thu-Po-3.4")

Modeling and dynamic simulation of liquid hydrogen-based low/high pressure hydrogen supply system using EcosimPro (in session "Tue-Po-1.6")

Modeling of Electro-Thermal Quench of a REBCO Superconducting Coil for Aircraft Propulsion Motors (in session "Wed-Or12")

Modelling heat ingress in LH2 containment systems – benchmarking improved thermal resistance network models against the finite element method (in session "Thu-Po-3.4")

Modelling LH2 tank operations for hydrogen-powered aircraft using generalised thermal models (in session "Wed-Or8")

Modelling the effect of anisotropic elasticity of REBCO on the mechanics of high field magnets with screening currents (in session "Thu-Po-3.6")

MODERN VALVES FOR CRYOGENICS- DESIGN CONSIDERATIONS with FOCUS ON LIQUIFIED HYDROGEN and HELIUM (in session "Wed-Po-2.4")

Monte Carlo simulation of the thermal radiation heat load to the cryogenic mirror and vacuum system of the Einstein Telescope (in session "Tue-Po-1.3")

NASA's progress maturing zero boil-off technology to enable long-duration space missions with cryogenic propellants (in session "Wed-Or8")

Neutron imaging of an operational dilution refrigerator (in session "Tue-Or6")

nEXO Underground LN2 Plant at SNOLAB (in session "Thu-Po-3.3")

Non-Destructive Measurement of Electrical Conductivity in Thin-Film Nb coated Cu for SRF Cavities using Planar Eddy Current Sensors (in session "Wed-Po-2.2")

Numerical and experimental study of a single-loop cryogenic pulsating heat pipe (in session "Tue-Po-1.2")

Numerical and Experimental Study on Dynamic characteristics of gas spring resonant system (in session "Tue-Po-1.5")

Numerical and parametric analysis of Regenerator used in miniature Stirling cryocooler based on SWaP-C objectives for HOT IR technology (in session "Tue-Po-1.5")

Numerical investigation of free piston Stirling cooler with annular regenerator for moderate cryogenic temperature applications (in session "Thu-Po-3.5")

Numerical investigation on the dispersion characteristics of cryogenic helium vapor cloud in confined space (in session "Thu-Po-3.2")

Numerical investigations on pressure wave refrigerators for sizing the dump tank and studying its effect on the operating frequency at first peak efficiency (in session "Tue-Po-1.3")

Numerical modeling and design of the acoustic expander for cryogenic refrigeration (in session "Thu-Or13")

Numerical Modeling on a Two-Stage GM Cryocooler (in session "Tue-Or2")

Numerical modelling of cavitation-induced water hammer in cryogenic fluid management systems with finite volume method (in session "Thu-Po-3.4")

Numerical modelling of tank motion on heat and mass transfer in liquid hydrogen storage (in session "Tue-Po-1.6")

Numerical Simulation of the Protective Effect of Air Walls on Liquid Hydrogen Leakage (in session "Tue-Po-1.6")

Numerical study on evaporation characteristics of LH2 tank during transportation under typical driving conditions (in session "Tue-Po-1.6")

Numerical study on transient heat transfer in forced flow of superfluid helium (in session "Tue-Or5")

Onset of mechanical degradation due to transverse compressive stress in Nb3Sn Rutherford cables as a function of heat treatment and impregnation. (in session "Wed-Or9")

Operation and control of superfluid helium in a Healthcare device (in session "Thu-Or18")

Operational experience and maintenance strategies developed over nearly three decades of continuous operation of the AGOR superconducting cyclotron cryogenics system (in session "Wed-Po-2.6")

Optimal actively cooled shield temperature in vacuum insulated applications with multilayer insulation (in session "Tue-Or2")

Optimising grip designs for the tensile testing of advanced engineering materials at cryogenic temperatures (in session "Wed-Po-2.2")

Optimization of 1 T HTS main magnet for Extremity MRI using Real-Coded Genetic Algorithm (in session "Wed-Po-2.6")

Optimization of cryogenic mixed-refrigerant cascades for intermediate cooling stations of the long-distance superconducting power cable SuperLink (in session "Thu-Or18")

Optimized Para Fraction of Liquid Hydrogen for Efficient Liquefaction and Storage (in session "Tue-Po-1.6")

Optimizing of regenerator materials for a high-frequency pulse tube cryocooler working below 3 K (in session "Tue-Po-1.2")

Optimizing pre-cooling methods for liquid air energy storage power stations: A focus on cooling of tanks (in session "Tue-Po-1.1")

Overview and status of the cryogenic system for SHINE accelerators (in session "Thu-Or16")

Overview and Status of the Long-Baseline Neutrino Facility Far Detectors Cryogenics System (in session "Thu-Or16")

Overview of collaborative research between UNICAMP in Brazil and Fermilab in cryogenics. (in session "Tue-Po-1.3")

Oxygenation under high pressure of EuBCO and GdBCO coated conductors (in session "Tue-Or3")

Performance analysis of a cryogenic liquid air energy storage system coupled with LNG cold utilization and ORC (in session "Tue-Po-1.3")

Performance improvement of low pressure interance pulse tube cryocooler (in session "Wed-Po-2.3")

Performance investigation of multilayer insulation structures with variable metal coating (in session "Thu-Po-3.6")

Performance of an advanced liquid air energy storage system based on cold energy utilization at LNG receiving station (in session "Wed-Po-2.1")

Performance parameters of a compact cryogenic hydrogen test platform (in session "Tue-Po-1.6")

Permeability testing of fibre reinforced thermoplastic pipes – validation and results (in session "Wed-Or11")

PLASTIC FLOW INSTABILITY IN AUSTENITIC STAINLESS STEELS AT A WIDE RANGE OF TEMPERATURES: FROM MACROSCOPIC TESTS TO MICROSTRUCTURAL ANALYSIS (in session "Wed-Po-2.2")

PLD-grown (Y,Gd)BCO superconducting thin films: Jc enhancement by mixed phase REBCO and oxygen annealing (in session "Tue-Or3")

Porous-medium modelling for CFD simulation of perforated plate heat exchangers for cryogenic applications (in session "Tue-Po-1.5")

Post-assembly adjustable gas-gap heat switch (in session "Wed-Po-2.3")

Prediction of pressure evolution with artificial neural network using extended datasets for non-venting liquid hydrogen tanks (in session "Thu-Or17")

PRELIMINARY design of a LH2 target cooling system at LBL (in session "Thu-Po-3.5")

PRELIMINARY design of a new Helium liquefaction system at LBL (in session "Thu-Po-3.3")

Preliminary development of near-feild radiative heat transfer measurement system for high-temperature superconductor (in session "Tue-Po-1.3")

Preliminary research of the fast cooldown (FCD) problem of SRF cavities using CFD method (in session "Wed-Po-2.5")

Pressure Relieving Approach for the S3FEL Cryogenic Distribution System (in session "Thu-Or18")

Process design and calculation of DALS test facility cryogenic system using Ecosimpro (in session "Wed-Po-2.5")

Process design and control strategies of the two large 1.9K Helium refrigeration plants at CERN (in session "Tue-Or1")

Production of 2G HTS tape at Faraday Factory Japan (in session "Wed-Or12")

Proven cryogenic solutions for large power under 4.5K by ALAT (in session "Thu-Po-3.3")

PT410 Cold Head dynamic characterization (in session "Wed-Or10")

Pulse tube refrigerator with shared inertance tube (in session "Tue-Po-1.2")

Qualification of 0-60 mbar pressure transducers for the LHC HL-LHC environment at CERN (in session "Wed-Po-2.4")

Qualification of standard pressure sensors for applications in superfluid helium at CERN (in session "Wed-Po-2.4")

Qualification of the first MgB2 and REBCO based Cold Powering System for HL-LHC (in session "Tue-Or4")

Qualification of the round REBCO cables of the SC-Links of HL-LHC (in session "Wed-Or12")

Recent developments of dark matter research magnet systems at Oxford Instruments (in session "Wed-Po-2.6")

Release of 4K GM-JT cryocooler system RJT-100ST (in session "Wed-Or10")

Relevance of Atomic Diffusion Additive Manufacturing (ADAM) in cryogenics and vacuum applications (in session "Tue-Po-1.4")

Research and development of 650 MHz superconducting cavity for CEPC (in session "Thu-Po-3.6")

Research on transient measurement of thermal conductivity of ultra-low temperature frozen soil (in session "Thu-Po-3.4")

Review on progresses of the homemade 15T LTS solenoidal background magnets using for material testing facility and ultra-high magnet fabrication：Magnet Design, Manufacture and Testing (in session "Thu-Or15")

RF response of REBa2Cu3O7-x coated conductors under high magnetic fields (in session "Thu-Po-3.6")

Safety at HL-LHC IT String during construction, commissioning, and operation (in session "Thu-Po-3.2")

Seat leak tests and commissioning of control valves in the cryogenic distribution system of the ESS superconducting linac (in session "Wed-Po-2.5")

Second cool down of the superconducting cavities of RAON Accelerator with the cryogenic helium distribution system (in session "Wed-Po-2.5")

Second cool-down result of SCL3 cryogenic plant for Korean heavy ion accelerator, RAON (in session "Wed-Po-2.5")

Sensing of cryogenic temperatures by superconducting NbTi(N) thin-film S-shaped Split Ring Resonators (in session "Thu-Or15")

Signs of pressure-triggered decomposition of the REBCO layer in Coated Conductors subjected to thermomechanical stress (in session "Tue-Or3")

Simulation Analysis and Optimization on Steady-state Characteristics of Cryogenic Distillation for Helium Isotope Separation (in session "Wed-Po-2.4")

Simulation of cryo-adsorptive hydrogen storage performance of type III hydrogen storage tank in a wide pressure range (in session "Tue-Po-1.6")

Simulation of the JT-60SA supercritical helium cooling loops during magnet integrated commissioning using Simcryogenics (in session "Tue-Po-1.1")

Simulation of thermal compensation of the ESS cryogenic moderator system caused by a transient heat load change when the proton beams are turns on or off (in session "Tue-Po-1.1")

SIS100 By-pass line - from the sketch into the tunnel (in session "Tue-Or4")

SLAC Cryoplant Comparison: Evaluating Performance of Identical Systems (in session "Wed-Po-2.5")

SMES HTS tape length optimization using ANN based digital twin (in session "Wed-Po-2.6")

Solubility of hydrogen in liquid helium - development of a measurement apparatus (in session "Tue-Or5")

Status of cryostat design for cryogenic payload suspension studies for the Einstein Telescope (in session "Wed-Po-2.2")

Status of the FCC cryogenics feasibility study (invited) (in session "Tue-Or1")

STEP Cryogenic Refrigeration – a Roadmap (in session "Wed-Or7")

Strange Behavior of Boiling Around Wire Heater at The Pressure Condition Very Close to The Lambda Point (in session "Thu-Po-3.4")

Strategies against thermo-acoustic oscillations in cryogenic valves and plants (in session "Wed-Po-2.4")

Structural and thermal design of cryogen-free mechanical property testing cryostat (in session "Thu-Or15")

Structural design and optimization of cryo-compressed hydrogen storage vessels (in session "Tue-Po-1.6")

Structure Design of a Novel Corrugated Membrane for Large-scale Liquid Hydrogen Storage (in session "Thu-Or17")

Study of the influence of the plate-fin heat exchanger pressure drop on the performance of liquid air energy storage (in session "Tue-Po-1.1")

Study of the thermo-mechanical properties of a lead-stainless-steel composite at 77 K (in session "Tue-Or5")

Study on Extreme Condition Stability of Miniaturized High-Temperature Superconducting Magnets Based on Sterling Conduction Cooling System (in session "Wed-Po-2.6")

Study on in situ measurement of heat leak into transfer line (in session "Tue-Po-1.1")

Study on motion characteristics of check valve in reciprocating liquid hydrogen pumps (in session "Tue-Po-1.5")

Study on the performance of liquid helium re-liquefier for superconducting chip test (in session "Thu-Po-3.5")

Supercomputing of Cryogenic Fine Solid Nitrogen Particle Production Using Laval Nozzle for Physical Photo Resist Removal-Cleaning Technology (in session "Tue-Or5")

Superconductor – Insulator Transition in Sputtered ZrNxOy Thin Films Induced by Tuning RF Power (in session "Thu-Po-3.6")

Superior RE123 bulks with small RE211 particles in-situ self-formed at temperature above Tp (in session "Tue-Or3")

Synthesis of graphene blended activated carbon adsorbents for cryo-adsorption vacuum pump application and their thermal conductivity evaluation at 80 K (in session "Tue-Po-1.4")

System integration and commissioning of helium liquefier (in session "Thu-Po-3.3")

Techno-economic analysis of low-cost air separation units with peak-shaving (in session "Tue-Or6")

Temperature uniformity characterization in heat treatment of the Nb3Sn coils for nuclear fusion (in session "Thu-Po-3.6")

The adsorption characteristics of helium on different activated carbons at 4.5-77K (in session "Wed-Po-2.4")

The consolidation program of the cryogenic systems of the ATLAS and CMS experiments (in session "Tue-Or1")

The Cryogenic Distribution System for the High Luminosity LHC upgrade at CERN (in session "Tue-Or4")

The CUORE cryostat, an infrastructure for rare-event searches at 10mK (in session "Wed-Or7")

The design and experimental research of a simple multiaxial test apparatus at cryogenic temperature (in session "Wed-Po-2.2")

The Design of a Curved Cryostat for the 90° Superconducting Magnet (in session "Wed-Po-2.6")

The Design of a Horizontal Testing Cryostat for the Superconducting curved magnets of Compact Synchrotron (in session "Wed-Po-2.6")

The development and validation of a multi-purpose cryostat for cryogenic pellet experiments (in session "Tue-Po-1.3")

The effects of cryogenic treatment on the performance and microstructure of austenitic stainless steel weldments (in session "Tue-Po-1.4")

The experimental investigation of gas-coupled free piston Stirling generators (in session "Tue-Po-1.5")

The experiments of a two-stage pulse tube cryocooler with pressed Er-plated screen as regenerator material (in session "Wed-Po-2.3")

The Failure Analysis of the Turbine for Helium Cryogenic System at Taiwan Light Source (in session "Thu-Po-3.3")

The FCCee collider and booster: study of the SRF cryogenic systems and machine architectures (in session "Wed-Po-2.5")

The Influence of Filling Ratio and Number of Turns on Heat Transfer Performance of Nitrogen Pulsating Heat Pipe (in session "Tue-Po-1.5")

The influence of the UA ratio between heat exchangers on the temperature distribution (in session "Thu-Po-3.3")

The mechanical research on high strength CICC jacket with YS>1500MPa@4.2K used for future fusion magnets (in session "Wed-Or9")

The Mode Selector Mechanism (MSM): a bi-stable cryo-actuator operated at 4.2K (in session "Thu-Po-3.1")

Theoretical and experimental study of a two-stage coaxial type Stirling pulse tube refrigerator (in session "Wed-Po-2.3")

Thermal analysis of a conduction-cooled superconducting quadrupole for ILC Main Linac with large temperature margin (in session "Thu-Po-3.4")

Thermal analysis of repurposing liquified natural gas tanks for liquid hydrogen storage (in session "Wed-Po-2.1")

Thermal characterization of a three-fluid cryogenic heat exchanger (in session "Tue-Po-1.5")

Thermal conductance measurement of electrically insulated joints for cryogenic applications (in session "Thu-Po-3.4")

Thermal conductivity of REBCO tapes with different stabilizers at 4.2 – 200 K (in session "Thu-Po-3.6")

Thermal contact resistance using time-resolved EUV diffraction -- a novel technique to study conduction-cooled superconducting RF cavity (in session "Wed-Po-2.4")

Thermal performance test of the cryogenic transfer line for SHINE cryogenic system (in session "Thu-Or16")

Thermal Properties and Microstructural Assessment of Glass Composites with Epoxy Matrix for Cryogenic Applications (in session "Tue-Po-1.4")

Thermodynamic analysis of a high cooling capacity dilution refrigerator under the critical velocity limitation of the dilute phase (in session "Tue-Po-1.2")

Thermodynamic analysis of an efficient liquefaction unit with high-grade cold storage in liquid air energy storage systems (in session "Tue-Po-1.1")

Thermodynamic analysis of liquid air energy storage systems based on different liquefaction cycles (in session "Tue-Po-1.1")

Thermodynamic modeling of mobile cryogenic tanks with a liquid-cooled thermal shield (in session "Tue-Po-1.6")

Thermodynamic modelling of liquid hydrogen tank warm-up at low fill levels (in session "Tue-Po-1.6")

Thermodynamic scaling analysis of cavitation-induced fluid transients in a cryogenic environment (in session "Thu-Po-3.4")

Topology optimization of cryogenic heat transfer in stressed rods for large liquid hydrogen tanks (in session "Wed-Po-2.1")

Tracing characteristic evaluation of Spontaneously-Condensed Nitrogen Droplets in Cryogenic Wind Tunnels (in session "Tue-Or6")

Transient numerical investigation on sealing performance of square labyrinth seal in the liquid hydrogen piston pump (in session "Thu-Or13")

Transverse stress limits of Bi-2212 Rutherford cables at 11 T, 4.2 K (in session "Wed-Or9")

Trial measurement for para-to-orthohydrogen back conversion under the Fe(OH)3 catalyst condition at J-PARC cryogenic moderator system (in session "Thu-Or17")

Two-dimensional discrete dislocation dynamics simulation of 316LN discontinuous plastic flow under cryogenic tensile behavior (in session "Wed-Po-2.2")

Ultra low temperature noise thermometry and its applications at ISIS Neutron and Muon Source (in session "Tue-Po-1.3")

Understanding AC losses in state-of-the-art superconducting cables: Physics insights from 2D to 3D computational modelling (in session "Thu-Po-3.6")

Unusual thermal properties of the nonsuperconducting PrBCO cuprates at low temperatures (in session "Thu-Po-3.4")

Upgrade of Vertical Test Stand for 650 MHz Superconducting RF Cavities for CEPC (in session "Wed-Po-2.4")

Using Waste Cold from LNG Conversion to Enhance Cold Food Supply Chains in India (in session "Wed-Or11")

Vaporization of cryogenic liquid stored in damaged vacuum-insulated tank (in session "Thu-Po-3.2")

Vibration-free Mirror Coating Test Facility for the Einstein Telescope (in session "Wed-Or10")

Visualization of second sound waves based on laser interferometry (in session "Thu-Or14")

Volume calculation and heat transfer performance simulation of a helical tube (in session "Thu-Po-3.4")

World’s 1st Magnetic Density Separation NbTi magnet, conduction cooled magnet performance & separation results (in session "Tue-Or6")

ICEC29/ICMC2024

Contact

Material Package

Choose timezone

ICEC29/ICMC2024

Contact