|
13:00
|
--- Lunch ---
|
|
14:00
|
Tue-Po-1.1
-
Laurent Jean Tavian
(CERN)
(until 16:00)
(Poster area)
|
|
14:00
|
A thermodynamic analysis of a coupled LAES system for recycling liquid ethylene cold energy
-
Yihong Li
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
An economic analysis of a coupled LAES system utilizing the regasification cold energy of liquid ethylene
-
Yihong Li
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Carbon Footprint of the Helium Recovery System at the ISIS Neutron and Muon Source
-
Alexander Jones
(Science and Technology Facilities Council)
|
|
14:00
|
Conceptual design of the cryogenic distribution system for the Shenzhen superconducting soft X-ray free electron laser
-
Guang Long Cui
(Institute of Advanced Science Facilities, Shenzhen)
|
|
14:00
|
Enhancing liquid air energy storage efficiency through integration with LNG: comparative analysis of cold energy recovery methods
-
Junxian Li
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Failure analysis for liquid helium leaking to the vacuum envelope of the cryogenic distribution system of the ESS superconducting linac
-
Hideki Tatsumoto
(European Spallation Source ERIC (ESS))
|
|
14:00
|
Optimizing pre-cooling methods for liquid air energy storage power stations: A focus on cooling of tanks
-
Zhikang Wang
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)
|
|
14:00
|
Simulation of the JT-60SA supercritical helium cooling loops during magnet integrated commissioning using Simcryogenics
-
Francois Bonne
(Univ. Grenoble Alpes, CEA IRIG-DSBT,Grenoble 38000 France)
|
|
14:00
|
Simulation of thermal compensation of the ESS cryogenic moderator system caused by a transient heat load change when the proton beams are turns on or off
-
Hideki Tatsumoto
(European Spallation Source ERIC (ESS))
|
|
14:00
|
Study of the influence of the plate-fin heat exchanger pressure drop on the performance of liquid air energy storage
-
Wei Ji
|
|
14:00
|
Study on in situ measurement of heat leak into transfer line
-
Shinji Hamaguchi
(National Institute for Fusion Science)
|
|
14:00
|
Thermodynamic analysis of an efficient liquefaction unit with high-grade cold storage in liquid air energy storage systems
-
Xiaoyu Fan
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Thermodynamic analysis of liquid air energy storage systems based on different liquefaction cycles
-
Zhaozhao Gao
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Tue-Po-1.2
-
Patricia Tavares Coutinho Borges De Sousa
(CERN)
(until 16:00)
(Poster area)
|
|
14:00
|
Computational Fluid Dynamic Studies of Miniature Pulse Tube Cryocoolers
-
Rajendra Kumar
(Karlsruhe Institute of Technology)
|
|
14:00
|
Cryogenic thermoelectric coolers with different passive branches
-
Hongwei Zhang
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Design methodology of a Mixed Refrigerant Joule-Thomson (MRJT) cryocooler
-
Darshit Parmar
M D Atrey
|
|
14:00
|
Development of a 2 kW Class Two-Stage Cascade Type Mixed Refrigerant Joule-Thomson Refrigerator for Semiconductor Etching Process with Cooling Temperature Below -100℃
-
Cheonkyu Lee
(Korea Institute of Industrial Technology)
|
|
14:00
|
Development of the 4 K G-M assisted J-T cooler with off-the-shelf mini compressor
-
Giorgio Ghilardi
(Korean Institute of Science and Technology)
|
|
14:00
|
Experimental and numerical study of a modified condensation-driven dilution refrigerator
-
Weijun Cheng
(University of Chinese Academy of Sciences)
|
|
14:00
|
Experimental and theoretical investigation to study pressure drop in regenerators
-
Praveen Topagi
(IIT Bombay)
Parikshit Badhe
(IIT Bombay)
|
|
14:00
|
Experimental Study of a Coupled Stirling Generator-Pulse Tube Cryocooler System Driven by a Stirling Engine
-
yanjie Liu
|
|
14:00
|
Experimental study of a Dilution Refrigeration Unit for space applications
-
Ziyao Liu
(Technical Institute of Physics and Chemistry, CAS)
Zijie Pan
(Key Laboratory of Technology on Space Energy Conversion, Technical Institute of Physics and Chemistry, CAS)
Lingjiao Wei
(Technical Institute of Physics and Chemistry, CAS)
|
|
14:00
|
Experimental study of a single-stage adiabatic demagnetization refrigerator
-
Lingjiao Wei
(中国科学院理化技术研究所)
|
|
14:00
|
Experimental study on a 1.3 W@4.2 K GM type pulse tube cryocooler
- Prof.
Changzhao Pan
(Shenzhen International Quantum Academy) Prof.
Xuming Liu
(Southern University of Science and Technology)
|
|
14:00
|
Investigation and optimization of the continuous and discrete heat exchangers in the mK dilution refrigerator for cooling superconducting quantum chips
-
Yujia Zhai
|
|
14:00
|
Magnetocaloric alloys for active magnetic regenerative refrigeration
-
Eunjeong Kim
(lawrence livermore national laboratory)
|
|
14:00
|
Numerical and experimental study of a single-loop cryogenic pulsating heat pipe
-
Abhinav Singh
(Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur)
|
|
14:00
|
Optimizing of regenerator materials for a high-frequency pulse tube cryocooler working below 3 K
-
Biao Yang
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Pulse tube refrigerator with shared inertance tube
-
Shurui Zhang
(Tongji university)
|
|
14:00
|
Thermodynamic analysis of a high cooling capacity dilution refrigerator under the critical velocity limitation of the dilute phase
-
Shiguang Wu
(State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciencess)
|
|
14:00
|
Tue-Po-1.3
-
Goncalo Tomas
(until 16:00)
(Poster area)
|
|
14:00
|
A helium isotope separation device with flow visualization unit
-
Qianxi Qu
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Conceptual design of a high intensity liquid ortho-deuterium moderator for the European Spallation Source
- Dr
Yannick Beßler
(Forschungszentrum Juelich GmbH, Central Institute of Engineering, Electronics and Analytics – Engineering and Technology (ZEA-1))
|
|
14:00
|
Design and construction at CERN of an enhanced thermal conductivity measurement setup in the temperature range of 1.8 K to 50 K
-
Maha Rhandi
(CERN)
|
|
14:00
|
Experimental research on heat transfer performance of low temperature support structure
-
Tiantian Xiao
|
|
14:00
|
Fabrication of Intrinsic Josephson Junction Devices using Hydrogen-Atmosphere Treatment
-
Hiromi Tanaka
(National Institute of Technology, Yonago College)
|
|
14:00
|
GFK-Cryostat for a Cryogenic Current Comparator
-
Hannes Nowak
|
|
14:00
|
Machine Learning Framework for Anomaly Detection and Maintenance Optimization in Large-Scale Cryogenic Systems
-
Paolo Cacace
(Sapienza Universita e INFN, Roma I (IT))
|
|
14:00
|
Mixed-refrigerant cooled 10 kA current leads for superconducting applications
- Mr
Jonas Arnsberg
(Karlsruhe Institute of Technology)
|
|
14:00
|
Monte Carlo simulation of the thermal radiation heat load to the cryogenic mirror and vacuum system of the Einstein Telescope
-
Xueli Luo
(Karlsruhe Institute of Technology)
|
|
14:00
|
Numerical investigations on pressure wave refrigerators for sizing the dump tank and studying its effect on the operating frequency at first peak efficiency
- Mr
Shariq Zafar
(Indian Institute of Technology Kharagpur)
|
|
14:00
|
Overview of collaborative research between UNICAMP in Brazil and Fermilab in cryogenics.
-
Roza Doubnik
(Fermi National Accelerator Laboratory, PO Box 500, Batavia IL 60510, United States.)
|
|
14:00
|
Performance analysis of a cryogenic liquid air energy storage system coupled with LNG cold utilization and ORC
- Mr
Jiahao Hao
(Technical Institute of Physics and Chemistry, CAS)
|
|
14:00
|
Preliminary development of near-feild radiative heat transfer measurement system for high-temperature superconductor
-
Bixi Li
(Technical Institute of Physics and Chemistry)
|
|
14:00
|
The development and validation of a multi-purpose cryostat for cryogenic pellet experiments
-
Richard Csiszar
(HUN-REN Centre for Energy Research)
|
|
14:00
|
Ultra low temperature noise thermometry and its applications at ISIS Neutron and Muon Source
-
Lucy Bain
(ISIS Neutron and Muon Source)
|
|
14:00
|
Tue-Po-1.4
-
Kirtana Puthran
(KIT - Karlsruhe Institute of Technology (DE))
(until 16:00)
(Poster area)
|
|
14:00
|
Adhesion analysis of resin impregnation systems in superconducting magnets
-
Roland Piccin
(CERN)
|
|
14:00
|
Advanced Composite Insulation Systems for Niobium-Tin Superconducting Magnets: Electrical Characterization of Laminates at Cryogenic Temperatures
-
Javier Osuna
(CERN)
|
|
14:00
|
Carbon fiber composites with cryogenic hydrogen-barrier property for liquid hydrogen storage tanks
-
Jiaqiao Zhang
(Southeast University)
|
|
14:00
|
Characterization of XM-19 forge products at 4K for their use in fusion energy devices.
-
Enrique Rodriguez Castro
(University Carlos III (ES))
|
|
14:00
|
Design of a multipurpose test facility (MTF) for HTS cables
-
Diego Perini
(CERN)
|
|
14:00
|
Dielectric and thermal performance of insulation systems for quench heaters for the protection of superconducting magnets
-
Javier Osuna
(CERN)
|
|
14:00
|
Effect of irradiation in ambient air and in liquid helium on the mechanical properties of SLA and FDM 3D printed high performance polymers
-
Christian Scheuerlein
(CERN)
|
|
14:00
|
Exploring 19 years of operating a superconducting wiggler at the Canadian Light Source
-
Denis Beauregard
(Canadian Light Source (CLS))
|
|
14:00
|
Fatigue strength properties of SS304 at cryogenic temperatures
-
D.S. Nadig
|
|
14:00
|
Isothermal Discharge Current and Trap Characteristics of Epoxy Resin at Low Temperature
-
Jixiang Yan
(TIPC)
|
|
14:00
|
Measurement of critical current irreversibility limits on ReBCO tapes for mechanical axial tensile and compressive strain
-
Simon Otten
(UTwente SuperACT)
|
|
14:00
|
Mechanical and physical properties of AlMgSc-alloy developed for cryogenic temperature applications
-
Zahra Abbasi
(Karlsruhe Institute of Technology, Institute for Technical Physics)
|
|
14:00
|
Mechanical strength and stability of bulk insulation materials: A study on hollow glass microspheres and expanded perlite.
- Dr
Friedrich Wolff
(3M Germany)
|
|
14:00
|
Synthesis of graphene blended activated carbon adsorbents for cryo-adsorption vacuum pump application and their thermal conductivity evaluation at 80 K
- Dr
Pankaj Sagar
(Cochin University of Science and Technology)
Abdul Nazer K H
(Department of Instrumentation, CUSAT)
|
|
14:00
|
The effects of cryogenic treatment on the performance and microstructure of austenitic stainless steel weldments
- Dr
Zeju Weng
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Thermal Properties and Microstructural Assessment of Glass Composites with Epoxy Matrix for Cryogenic Applications
-
Anna Krzak
(Silesian University of Technology)
|
|
15:40
|
Relevance of Atomic Diffusion Additive Manufacturing (ADAM) in cryogenics and vacuum applications
-
Erik Walcz
(Centre for Energy Research)
|
|
14:00
|
Tue-Po-1.5
-
Xiujuan Xie
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
(until 16:00)
(Poster area)
|
|
14:00
|
Design and Development of Cryogenic Dewar
-
Prof Swapan Chandra Sarkar
(CENTRE FOR RURAL & CRYOGENIC TECHNOLOGIES, JADAVPUR UNIVERSITIES, KOLKATA-700032,INDIA)
|
|
14:00
|
Dynamic temperature variation of insulation materials for solid-phase cold storage tank of liquid air energy storage
- Ms
Yihan Tian
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Evaluation on the operational state of turboexpanders in a helium refrigerator for nuclear fusion experimental devices using principal component analysis
- Dr
Tetsuhiro Obana
(NIFS)
|
|
14:00
|
Experimental characterization of a compact centrifugal pump for liquid helium transfer
-
Johannes Doll
(TU Dresden)
|
|
14:00
|
Experimental study of the thermo-hydraulic performance of 3-stream plate-fin heat exchanger
- Prof.
Parthasarathi Ghosh
(IIT Kharagpur India)
|
|
14:00
|
Investigation on multi-stage centrifugal cold compressors in superfluid helium cryogenic system
-
Jihao Wu
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Investigation on the dynamic response of aerostatic bearings-rotor system with different bearing gas
- Prof.
Liqiang Liu
(Technical institute of physics and Chemistry,CAS)
|
|
14:00
|
Numerical and Experimental Study on Dynamic characteristics of gas spring resonant system
-
Ziyao Liu
(Technical Institute of Physics and Chemistry, CAS)
|
|
14:00
|
Numerical and parametric analysis of Regenerator used in miniature Stirling cryocooler based on SWaP-C objectives for HOT IR technology
- Prof.
Dr. Zhang Xiaoqing
|
|
14:00
|
Porous-medium modelling for CFD simulation of perforated plate heat exchangers for cryogenic applications
- Dr
TAPAS KUMAR NANDI
(INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR)
|
|
14:00
|
Study on motion characteristics of check valve in reciprocating liquid hydrogen pumps
-
Shaoqi Yang
|
|
14:00
|
The experimental investigation of gas-coupled free piston Stirling generators
-
Ziyao Liu
(Technical Institute of Physics and Chemistry, CAS)
|
|
14:00
|
The Influence of Filling Ratio and Number of Turns on Heat Transfer Performance of Nitrogen Pulsating Heat Pipe
-
Jixiang Yan
(TIPC)
|
|
14:00
|
Thermal characterization of a three-fluid cryogenic heat exchanger
-
Carlos Hernando
(CYCLOMED TECHNOLOGIES)
|
|
15:45
|
Cryopumps applied to Fusion Energy - MAST-U Enhancements Double Beam Box System
-
Kiyana Patel
(UK Atomic Energy Authority)
|
|
14:00
|
Tue-Po-1.6
-
Hendrie Derking
(Cryoworld BV)
(until 16:00)
(Poster area)
|
|
14:00
|
A review on determining the equilibrium ortho-parahydrogen ratio
-
Sebastian Eisenhut
|
|
14:00
|
A study on the scheme of cold energy recovery for compensating liquefaction in liquid hydrogen energy storage
-
Bingming Wang
|
|
14:00
|
ANN-CFD synergistic approach for improved predictions of pressure evolution in non-venting self-pressurized liquid hydrogen tanks
- Dr
Anas A. Rahman
(Assistant Professor of Mechanical Engineering)
|
|
14:00
|
Cryo-Compressed Hydrogen Economic Analysis
-
Le Fang
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Dynamic modelling of catalyzed vapor cooled shield for accelerated chill down of a liquid hydrogen tank during refilling.
-
Liam Turner
(Monash University)
|
|
14:00
|
Modeling and dynamic simulation of liquid hydrogen-based low/high pressure hydrogen supply system using EcosimPro
-
Byeongchang Byeon
(Korea Institute of Machinery & Materials)
|
|
14:00
|
Numerical modelling of tank motion on heat and mass transfer in liquid hydrogen storage
-
James Wang
(Monash University)
|
|
14:00
|
Numerical Simulation of the Protective Effect of Air Walls on Liquid Hydrogen Leakage
- Prof.
Liqiang LIU
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Numerical study on evaporation characteristics of LH2 tank during transportation under typical driving conditions
-
Shihao Li
(Southeast University)
|
|
14:00
|
Optimized Para Fraction of Liquid Hydrogen for Efficient Liquefaction and Storage
-
Ho-Myung Chang
|
|
14:00
|
Performance parameters of a compact cryogenic hydrogen test platform
-
Maximilian Grabowski
(TUD Dresden University of Technology)
|
|
14:00
|
Simulation of cryo-adsorptive hydrogen storage performance of type III hydrogen storage tank in a wide pressure range
-
Linlin Gao
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Structural design and optimization of cryo-compressed hydrogen storage vessels
-
Kexin Li
(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
|
|
14:00
|
Thermodynamic modeling of mobile cryogenic tanks with a liquid-cooled thermal shield
-
Valeryia Sidarava
(Technical University of Munich, TUM School of Engineering and Design)
|
|
14:00
|
Thermodynamic modelling of liquid hydrogen tank warm-up at low fill levels
-
James Wang
(Monash University)
|
|
14:30
|
Doing Business with CERN (Reserved for participants from Industry only)
-
Alvaro Lecinana Soldevilla
(CERN)
(until 15:30)
|
|
15:30
|
--- Coffee &Tea break ---
|
|
16:00
|
Tue-Or4
-
Ignacio Aviles Santillana
(CERN)
(until 18:00)
(Room D)
|
|
16:15
|
Qualification of the first MgB2 and REBCO based Cold Powering System for HL-LHC
-
Amalia Ballarino
(CERN)
|
|
16:30
|
Design and test of a 10 MJ hybrid high-temperature superconducting magnetic energy storage module
-
Tao Ma
(Beijing Jiaotong University)
|
|
16:45
|
A thermal hydraulic evaluation method of toroidal field superconducting magnet for China’s next generation fusion reactor
-
Jinxing Zheng
(Institute of plasma physics, Chinese Academy of Sciences)
|
|
17:00
|
Cryogenic options for future accelerators: case study for the Muon Collider ring
-
Patricia Tavares Coutinho Borges De Sousa
(CERN)
|
|
17:15
|
The Cryogenic Distribution System for the High Luminosity LHC upgrade at CERN
-
Michele Sisti
(CERN)
|
|
17:30
|
Commissioning of the cryogenic system of the HL-LHC Inner Triplet String test bench
-
Aleksandra Onufrena
(CERN)
|
|
17:45
|
SIS100 By-pass line - from the sketch into the tunnel
-
Marion Kauschke
|
|
16:00
|
Tue-Or5
-
Milind Atrey
(until 18:00)
(Room A)
|
|
16:00
|
Numerical study on transient heat transfer in forced flow of superfluid helium
-
Yingxuan Hu
(Zhejiang University, Institute of Refrigeration and Cryogenics)
|
|
16:15
|
Solubility of hydrogen in liquid helium - development of a measurement apparatus
-
Julian Will
|
|
16:45
|
Supercomputing of Cryogenic Fine Solid Nitrogen Particle Production Using Laval Nozzle for Physical Photo Resist Removal-Cleaning Technology
-
Jun Ishimoto
(Institute of Fluid Science, Tohoku University)
|
|
17:00
|
Mesoscopic Numerical Study of Cryogenic Bubble Generation and Liquid-Vapor Interface Movement in Microgravity
-
HangJin Jo
|
|
17:15
|
Study of the thermo-mechanical properties of a lead-stainless-steel composite at 77 K
-
Fernando Aretio Zárate
(CERN)
|
|
17:30
|
A new 3-omega technique for the measurement of thermal conductivity and diffusivity of cryogenic helium and hydrogen and their mixtures
-
Ben Hamilton
|
|
17:45
|
Improved Heat Transfer Prediction Methods in Channels for Natural Gas Liquefaction
-
Jinglei Wang
(Zhejiang University)
|
|
16:00
|
Tue-Or6
-
Tripti Sekhar Datta
(Indian Institute of Technology. Kharagpur. India)
(until 18:00)
(Room B+C)
|
|
16:00
|
Heat transfer and thermodynamic stability study of a self-sustained vertical cooling loop in He I and He II
-
Torsten Koettig
(CERN)
|
|
16:15
|
Experimental improvements to the acoustic expander with applications to cryogenic refrigeration
-
Jacob Adams
|
|
16:30
|
Tracing characteristic evaluation of Spontaneously-Condensed Nitrogen Droplets in Cryogenic Wind Tunnels
-
Jiaxin Hou
(Huazhong University of Science and Technology)
|
|
16:45
|
World’s 1st Magnetic Density Separation NbTi magnet, conduction cooled magnet performance & separation results
-
Goncalo Tomas
|
|
17:00
|
Demonstration of a novel electro-chemical hydrogen refrigerator
-
Daniel Hollibaugh
(Eta Space LLC)
|
|
17:15
|
Techno-economic analysis of low-cost air separation units with peak-shaving
-
Zhikang Wang
(Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)
|
|
17:30
|
Development of Glass Fiber Composite Axial Insulating Cryogenic Vacuum Barrier for Superconducting Feeders of SST-1 Tokamak
-
Rajiv Sharma
(Institute for Plasma Research)
|
|
17:45
|
Neutron imaging of an operational dilution refrigerator
-
Christopher Lawson
(ISIS Neutron and Muon Source)
|
|
18:00
|
--- Exhibitors reception in Exhibition area ---
|
