Status of detectors (update/corrected)
ERAM-07 : pb seen when bot TPC assembly (not short circuit but too much dust and mesh hole ! )
ERAM-11 : mounted on bot TPC !
ERAM-14 : mounted on second test box in large clean room. to me removed and staored
ERAM-15 : mounting pb on bot TPC --> checked OK at saclay --> usable. at Saclay
ERAM-16 : cc repaired
ERAM-20 : large gain in border
ERAM-27 : THE "surplisingly good" one from bad batch 25-34
ERAM-36 small spreading issues
ERAM-37 small spreading issues
ERAM-39
ERAM-40
ERAM-41
ERAM-43
ERAM-44
ERAM-45
ERAM-38
ERAM-42 (to be confirmed after scan this week) glued on new stiffener
MM1-DLC2 (ERAM-00 in database)
MM1-DLC1
ERAM-25 : bad batch, gain gradient : cards reused
ERAM-33 : bad batch, gain gradient : cards reused
ERAM-34 : bad batch, gain gradient : cards reused
ERAM-18 : RC/2
ERAM-14
ERAM-15 : mounting pb on bot TPC --> checked OK at saclay --> usable
ERAM-16 : cc repaired
ERAM-20 : large gain in border
ERAM-27 : THE "surplisingly good" one from bad batch 25-34
ERAM-36 small spreading issues
ERAM-37 small spreading issues
ERAM-39
ERAM-40
ERAM-41
ERAM-43
ERAM-44
ERAM-45
ERAM-38
ERAM-42 tsvan to be confirmed, glued on new stiffener)
to glue
ERAM-48
to scan
ERAM-46-48 with cards 1,5,6,11 and 15 - 76 (from ERAM-33)
ERAM-39 or 40 to rescan with cards 80 and 84 (from ERAM-27) (they both use cards 7,10 !)
remaining to be used
1, 5, 6, 11 (blue cabinet) + reused 15, 76 to scan ERAM-46 47 48
73 the only one to rescan ERAM-39 or 40 which were scanned with cards 7, 10. a c ard is missing to rescan this eram.
missing card : 44
card 73 alone ? with fec 37 which was damaged and repaired .... originally affected to ERAM-12
to check : the 4 cards at Tokai which should have been the ones affected to ERAM-15 and 12 (54, 37) and (44, 24)
BUT 24 and 37 are at bdg 182 ! 44 and 54 are missing. And the 4 FEC cards at JPARC are 14,72, 30, 35 !
link to the FEC database (oct 30 update)
Alain checked all the pieces needed for TOP TPC