Participants: Matthew, David, Joe, Debdeep, Collette, Michele, Patric, Marlene
Specification Document:
Currently in progress.
Action: David to share the document ahead of the next meeting so it can be discussed during the meeting.
Magnet Positions:
The dipole position is fixed.
There is still some flexibility in the quadrupole positions. Action: David to present trade-offs.
Dipole Magnet Ramping Speed:
To be clarified.
It was agreed that the magnet will operate in DC mode (continuously powered, not pulsed), so a low ramping speed is acceptable.
Mechanical Stability:
Mechanical simulations have been performed, assumed to demonstrate mechanical stability of the chamber.
Action: Marlene to confirm.
David noted that window bowing will be similar to the previous design and should not pose an issue.
Beam Parameters:
John provided input on the expected beam parameters to Joe and Debdeep.
Action: Share this input with David, and all involved to test diagnostic performance using these parameters.
Diagnostics & Integration:
Action: Reserve space for the OSR diagnostics next to the spectrometer.
Action: Finalize space reservation with Edu for the camera array, ensuring no interference with the magnet support.
Action: Discuss and define the alignment strategy for the OSR diagnostics.
Spectrometer Dipole Chamber:
No further comments or concerns.
Action: Marlene to launch the approval process in PLM.