Detector production:

• The 50x50 MicroMegas gas connectors were fixed and they were picked up from the MPT workshop by Michele
• One of the 20x20 µRWELLs that needed cleaning has been fixed as well

News on the May test beam at SPS:

• Test beam dates: Wed May 6th - 20th
• Goal: testing the 50x50 cm² chambers using the GEM tracker (used in the October PS TB) as a reference
• We asked the Bari mechanical engineer to provide a basic structure
• Availabilities and interest for the May test beam?
• Luca has a support structure for two 50x50 and a TGC that might be tested as well
• We can use it to test the triggered mode in high rate

News on the July test beam at PS:

• Test beam dates: Wed July 22nd - Aug 5th
• We discussed with the Bari engineer about the change in the mechanics
  • Bars designed that attach to the 20x20 and hold the VMMs in place
    • This needs to be added for the 50x50 as well
  • Better position for HV connectors for both 20x20 and 50x50
  • Better ventilation for tracker and 20x20
  • Position for the 50x50 ventilation to be checked better
• Discussions with ECAL team (Crilin):
  • To read out the calorimeter using separated DAQ, we will do a test in Rome in March using the two setup backends 
  • Possibility to use the VMM to read out the ECAL SiPMs