Participants: Eleonora Belli (EB), Vittorio Ferrentino (VF), Philip Schwartz (PS)

Discussion Points:

18 MeV electron line (TT450)

• Magnets from previous run will be reused in the new positions, the layout with the functional positions can be found here: EDMS SPSLAWK_0043
• No additional documentation is required.
  • Action (all): Check cabling request. 

Proton line (TT41)

• Magnets from previous run will be reused in the new positions, the layout with the functional positions can be found here: EDMS SPSLAWK_0042
• No additional documentation is required.
  • Action (all): Check cabling request. 

150 MeV electron line (TT451) 

See attached slides for more details. 

• Dipoles: 2 operational spare units already available at CERN,  to be refurbished. 
  • Action: EB to upload functional specs on EDMS as draft for discussion 

• Quadrupoles: 9 units from PSI already available at CERN, confirmed with functional specs (EDMS 3414189), to be refurbished. 
  • Actions:
    • EB to officially release functional specs
    • MSC to provide refurbishment drawings, engineering specs and Magnetic Measurements Report (measurements will be likely performed in 867).

• Sextupoles: 6 units from PSI already available at CERN, confirmed with functional specs (EDMS 3414193), to be refurbished.
  • Actions: 
    • EB to officially release functional specs
    • MSC to provide refurbishment drawings and engineering specs.

• Sextupole in the injection region: 2 units to be produced, confirmed with functional specs (EDMS 3427939)
  • Actions : 
    • EB to officially release functional specs
    • MSC to upload design report on EDMS after internal review
    • EN-MME to provide the final drawing
    • MSC to provide Technical Specifications and complete the tendering

• Octupoles: 4 units to be produced, confirmed with functional specs (EDMS 3414194)
  • Actions:
    • EB to officially release functional specs
    • MSC to finalise the design report and upload it on EDMS
    • EN-MME to provide the final drawing
    • MSC to provide Techcnial Specifications and complete the tendering

• H/V correctors: 10 units from CTF3 already available at CERN, confirmed with functional specs (EDMS 3414187), to be refurbished. 
  • Actions:
    • EB to officially release functional specs
    • MSC to provide refurbishment drawings and engineering specs.

Actions:

• VF/PS to provide magnet codes to Frederic Galleazzi to be included in the final layout of the 150 MeV line. 
• check cabling request

Note: The attached slides also include the accelerating structure and the spectrometer magnets, which are under the responsibility of other CPs. Further details are provided in the slides. -> Action: Marlene Turner to provide functional specs for the spectrometer magnets.