June 28, 2015 to July 2, 2015
JW Marriott Starr Pass Resort
Etc/GMT-7 timezone

Thermal Analysis of Superconducting Undulator (SCU) Cryomodules

Jul 1, 2015, 9:00 AM
Exhibit Hall (Arizona Ballroom)

Exhibit Hall (Arizona Ballroom)

Poster Presentation CEC-06 - Superconducting Magnet Systems C3PoD - Superconducting Magnets Cryogenic Systems I


Yuko Shiroyanagi (Argonne National Laboratory)


A cryocooler-cooled superconducting undulator (SCU0) has been operating in the Advanced Photon Source (APS) storage ring since January of 2013. Based on lessons learned from the construction and operation of SCU0, the 2nd superconducting undulator (SCU1) has been built and cold tested stand-alone. An excess cooling capacity measurement and static heat load analysis show a large improvement of cryogenic performance of SCU1 compared with SCU0. ANSYS-based thermal analysis of these cryomodules incorporating all the cooling circuits was completed. Comparisons between measured and calculated temperatures at the three operating conditions of the SCU0 cryomodule (static, beam heat only, beam heat and magnet current) will be presented. *Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.*

Primary author

Yuko Shiroyanagi (Argonne National Laboratory)


Charles Doose (Argonne National Laboroatory) Joel Fuerst (ANL) Dr Katherine Harkay (Argonne National Laboratory) Matthew Kasa (Argonne National Laboratory) Quentin Hasse (Argonne National Laboratory) Dr Yury Ivanyushenkov (Argonne National Laboratory)

Presentation materials