---------------------------------
150403 DH&A Japan Progress Report
---------------------------------
[1] Progress Report
(1-1) End-to-End Test
	End-to-end communication from CALET to WCOC was tested using ICS link.
	Commanding operation from CALET-GSE at JAXA was also tested. All the 
	tests were successfully completed.
(1-2) WCOC QL System
	WCOC QL system was used to monitor the CALET in real time during 
	the CALET system PFT. The QLs were consistently improved during the test
	and they are well capable of monitoring the observation in realtime.
(1-3) Schedule/Macro Command Files
	During 72hr muon run, schedule command file created at WCOC was used to 
	operate the CALET and it was successful. Schedule command file is sequense
	of commands with time to be executed. The main command used in the schedule
	command file is the execution of macro command file. Macro command files 
	were also created at WCOC and JAXA and they were used in 72hr muon run.

[2] Action Items 
(2-1) 24-hour long simulation data
	In addition to operation settings, high voltage setting, temperatures, and
	other house keeping data are now filled with typical values. Although processing
	the 24-hour data is still in progress, part of them will be uploaded by the
	international teleconference.
(2-2) description of trigger system
	An intensive but brief description of the CALET trigger system was circulated
	as a material of the international teleconference.
(2-3) description of coordinate system
	A brief description of the CALET coordinate system and channel assignment in
	physical space was circulated, too.
(2-4) Level1 format
	Now we have started working on them again. However, until the final test at the
	launch site is completed, it would be difficult to concentrate on this task.
	We will close the action item by the next TIM.