Name: CEC-ICMC 2017 - Abstracts, Timetable and Presentations
Start: 2017-07-09T08:00:00-05:00
End: 2017-07-13T11:30:00-05:00
Location: Monona Terrace Community and Convention Center

Monday, 10 July 2017

07:50 Cryo Expo Open (9:00 a.m. - 5:00 p.m.)
Cryo Expo Open (9:00 a.m. - 5:00 p.m.)
07:50 - 07:55
Room: Exhibit Hall AB

07:55

07:55 - 08:15
Room: Madison Ballroom
08:15
08:15 - 09:00
Room: Madison Ballroom
Contributions

08:15 A NASA Perspective on Electric Propulsion Technologies for Large Commercial Aircraft - Nateri Madavan (NASA Ames Research Center)
09:00
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Development status of a high cooling capacity single stage pulse tube cryocooler - Takashi Hirayama (Sumitomo Heavy Industries, Ltd,Japan)

09:00 A power recovery cascade pulse tube cryocooler with displacer - Jing yuan Xu (Technical Institute of Physics and Chemistry, CAS)

09:00 High efficiency 40 K single-stage Stirling-type pulse tube cryocooler - xianlin wu (Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Technical Institute of Physics and Chemistry, CAS) Changzhao Pan (Technical Institute of Physics and Chemistry, CAS) Junjie Wang (Technical Institute of Physics and Chemistry, CAS)

09:00 Design and test of the Stirling-type Pulse Tube Cryocooler - Yong-Ju Hong (Korea Institute of Machinery & Materials)

09:00 Measurements of a Parallel Channel Adjustable Inertance Tube - Andrew Elmeer (University of Wisconsin-Madison)

09:00 Glass Pulse-Tube Cryocooler - Zhiyi Jiang (University of Wisconsin-Madison)

09:00 Novel Simulation Model for GM type Orifice Pulse Tube Cryocooler - HEMANT NAIK (S. V. National Institute of Technology)

09:00 Numerical analysis of inertance pulse tube cryocooler with a modified reservoir - Biju T. Kuzhiveli (National Institute of Technology Calicut)

09:00 Influence of Regenerative Material on Performance of 6K Level High Frequency Pulse Tube Cryocooler - Xiaoyong Li (Technical Institute of Physics and Chemistry, CAS) Yanjie Liu (Technical Institute of Physics and Chemistry CAS) Jingtao Liang
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 High Temperature Superconducting Power Devices and Its Cryogenic Systems - Shaotao Dai (Beijing Jiaotong University)

09:00 Theoretical and Experimental Studies on a Cryogenic Thermal Storage in Superconducting Cable Terminations to Protect Against Unexpected Heat Loads - Nicholas Suttell (Florida State University)

09:00 Cryogenic Design of an Integrated Cooling System for Three-Phase SFCL - Ho-Myung Chang (Hong Ik University)

09:00 Development of a lab-scale YBCO based High-Tc Superconducting Power cable - Sudheer Thadela (Indian Institute of Technology, Kharagpur)

09:00 Application on turbo brayton refrigerator for world first commercialization on HTS power cable system - Yanghun Kim (LS Cable and Sysem)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 A Highly Reliable Cryogenic Mixing Pump with No Mechanical Moving Parts - Weibo Chen (Creare LLC)

09:00 Spectral Mass Gauging of Unsettled Liquid with Acoustic Waves - Ali Kashani (MEI Company)

09:00 Vapor Shroud for Liquid Hydrogen Fueling of an Unmanned Aerial Vehicle (UAV) - Kevin Cavender (Washington State University)

09:00 Simulation test on the performance of thermodynamic vent system with R123 - Yanzhong LI (Xi'an Jiaotong University)

09:00 Cryogenic thermal emissivity measurements on small-diameter stainless steel tubing - Amir Jahromi (NASA/GSFC)

09:00 Analysis of thermal stratification during initial active pressurization in a cryogenic propellant tank - Biju T Kuzhiveli (National Institute of Technology Calicut)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 CFD Research on Hydrodynamic Gas Bearings with Different styles of Grooves - J. H. Wu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:00 Experimental investigation on charcoal adsorption for cryogenic pump application - Matthieu Scannapiego (Karlsruhe Institute of Technology)

09:00 Control strategy of helium twin screw compressor unit for large cryogenic system - Bingming Wang (CAS Key Laboratory of Cryogenic, Technical Institute of Physics and Chemistry)

09:00 The development of helium turbo expanders for a 250W helium refrigerator - Lianyou Xiong (Technical Institute of Physics and Chemistry, CAS)

09:00 Structure design and dynamics simulation study of active magnetic bearing for helium centrifugal cold compressor - Jihao Wu (University of Chinese Academy of Sciences)

09:00 The influence of seal clearance on the performance of stirling cooler - Zheng Wang

09:00 SNS Cryogenic Test Facility Kinney Vacuum Pump Commissioning and Operation at 2 K - Brian DeGraff (ORNL)

09:00 Design and performance assessment of Cold compressor for typical Cold Box of the large tokamak machine - Hyun-Sik Chang (ITER Organization)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 An extremely high stability cooling system for planet hunter. - Jean Louis Lizon a l'Allemand (European Souther Observatory)

09:00 Remote refilling of LN2 cryostat for high sensitivity Astronomical application - Jean Louis Lizon a l"Allemand (European Southern Observatory)

09:00 Real performance and technical commissioning of an ultra-stable cooling system for a mid-range cryogenic astrophysical instrument - Santiago Becerril-Jarque (IAA-CSIC (Instituto de Astrofísica de Andalucía))

09:00 An Hybrid liquid nitrogen system to cool a large detector. - Jean Louis Lizon a l'Allemand (European Southern Observatory)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 The Progress on Cryogenic Calorimeter for Superconducting Undulators at SSRF - Jian Cui (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)

09:00 Thermal Model of a Quench in Superconducting Undulators - Yuko Shiroyanagi (Argonne National Laboratory)

09:00 Progress in development of PANDA solenoid magnet. - Evgenii Piata (Budker Institute of Nuclear Physics (RU))

09:00 The Superconducting Dipole of SIS100: Technology Optimization for Series Production - Christian Roux (GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, Germany)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Adaption of the LHC Cold Mass Cooling System to the requirements of the Future Circular Collider (FCC) - Claudio Kotnig (Graz University of Technology)

09:00 Preliminary Design of CIADS Cryogenic System - Xiaofei Niu Xiaohong Guo

09:00 PIP-II cryogenic system and the evolution of Superfluid Helium Cryogenic Plant specifications - ANINDYA CHAKRAVARTY (Bhabha Atomic Research Centre, India; Fermilab, USA)

09:00 LCLSII 2K Cold Box and Internal Piping System Mechanical Design & Analysis - Shirley Yang

09:00 Impact of large beam-induced heat loads on the transient operation of the beam screens and cryogenic plants of the Future Circular Collider (FCC) - Laurent Tavian (European Organization for Nuclear Research)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 SNS Central Helium Liquefier Spare Carbon Bed Installation and Commissioning - Brian DeGraff (ORNL)

09:00 Design and Performance testing of an External helium purifier for the cryogenic system at CHMFL - Shuai Zhang (University of Science and Technology of China)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Final Test Results for the Ground Operations Demonstration Unit for Liquid Hydrogen - Bill Notardonato (NASA Kennedy Space Center)

09:00 First experiment on liquid hydrogen transportation by ship inside Osaka bay - Minoru Takeda

09:00 The Cryogenic Moderator System for the European Spallation Source - Jakub Tkaczuk (Dresden University of Technology)

09:00 Annular air leaks in a liquid hydrogen storage tank - Angela Krenn (NASA)
Morning Break (9:00 - 10:00 a.m.)
Morning Break (9:00 - 10:00 a.m.)
09:00 - 10:00
Room: Cryo Expo, Exhibit Hall AB
09:30
09:30 - 10:45
Room: Lecture Hall
Contributions

09:30 [Invited] High Temperature Superconductors (HTS) in Electric Aircrafts – the baseline and the perspective - Tabea Arndt (Siemens AG)

10:00 [Invited] Development of Cryogenic/Superconducting Components for Aircraft Electric Propulsion - Timothy Haugan (U.S. Air Force Research Laboratory)

10:30 Experimental investigation into the fault response of a superconducting hybrid electric propulsion electrical power system to a DC rail to rail fault - Steven Nolan (University of Strathclyde)
09:30 - 11:00
Room: Hall of Ideas - EH
Contributions

09:30 [Invited] A portable superconducting cryo-magnet with magnetic field of > 3 T generated by the pulsed field magnetization - Difan Zhou (University of Cambridge)

10:00 Trapped field property of iron-pnictide bulk magnet - Akiyasu Yamamoto (Tokyo Institute of Technology)

10:15 Current distribution in field-cooled $YBa_2Cu_3O_7$ and $MgB_2$ disks as deduced from levitation force and trapped field measurements carried out in a large temperature range - Pierre Bernstein (Université de Caen-Normandie)

10:30 Large Diameter, Single Grain (RE)BCO Bulk Superconductors Fabricated by Infiltration and Growth - David Cardwell (University of Cambridge)

10:45 Non-destructive investigation of hybrid of ferromagnet /(RE)BCO large grain bulks by flux extraction magnetometry and levitation force - Philippe Vanderbemden (University of Liege)
11:00
11:00 - 12:15
Room: Madison Ballroom AD
Contributions

11:00 Test Results on TRL5 Vibration-free Sorption-based Cooler for 15 – 30 K - Marcel ter Brake (University of Twente, The Netherlands)

11:15 Study of reverse Brayton cryocooler with helium-neon mixture for HTS cable - Aman Kumar Dhillon (Indian Institute of Technology Kharagpur)

11:30 Performance of an ejector for application in a nitrogen JT cycle: experimental and numerical analysis - Marcel ter Brake (University of Twente)

11:45 Intrinsic limitation on the cooling power of the JT cryocoolers - Dongli Liu (Zhejiang University)
11:00 - 12:15
Room: Hall of Ideas - GJ
Contributions

11:00 Development and Performance Evaluation of High Speed Cryogenic Turboexpanders at BARC, India - ANINDYA CHAKRAVARTY (Bhabha Atomic Research Centre, India; Fermilab, USA)

11:15 ALAT latest magnetic bearings turbomachines commissioning - Cecile Gondrand (Air Liquide Advanced Technologies)

11:30 Superconducting Bearings for a LHe Transfer Pump - Thomas Funke (Technische Universitaet Dresden)

11:45 Use of ionic liquids in helium applications - Klaus Ohlig (Linde Kryotechnik AG)

12:00 The Helium Turbines Design and Testing of 500W@4.5 K Cryogenic System - XiaoFei Lu (Institute of Plasma Physics,Chinese Academy of Sciences)
11:00 - 12:30
Room: Madison Ballroom BC
Contributions

11:00 Conceptual design of a cryogen-free μ-MRI device - Bertrand Baudouy (CEA Saclay)

11:15 A new passive system for contamination-free long-distance cryo-transfer of biological tissues - Tian Cheng (Laboratory for Biological Geochemistry, Institute of Environmental Engineering, Ecole Polytechnique Fédérale de Lausanne)

11:30 Effect of Surface Condition to Temperature Distribution in Living Tissue during Cryopreservation - Masakazu NOZAWA (National Institute of Technology, Akita College)

11:45 Safety Aspects of Whole-Body Cryochamber and Cryosauna Operation - Agnieszka Piotrowska (Wroclaw University of Science and Technology)

12:00 A tissue snap-freezing apparatus without sacrificial cryogens - Srinivas Vanapalli (University of Twente)

12:15 Efficient biostorage below -150 degrees C without sacrificial cryogen - Philip Spoor (Chart Industries)
11:00 - 12:30
Room: Lecture Hall
Contributions

11:00 [Invited] Cryogenic Power Electronics for Superconducting Power Systems - Lukas Graber (Georgia Institute of Technology)

11:30 [Invited] Future Cryogenic Switchgear Technologies for Superconducting Power Systems - Chunmeng Xu (Georgia Institute of Technology)

12:00 [Invited] An AC Homopolar HTS Generator for Flywheel Energy Storage - Rod Badcock (Victoria University of Wellington)
11:00 - 12:45
Room: Hall of Ideas - EH
Contributions

11:00 [Invited] Superconducting thin films and multilayers for particle accelerators - Aleksander Gurevich (Department of Physics, Old Dominion University)

11:30 Characterizing thin films by RF and DC methods - Anne-Marie Valente-Feliciano (Jefferson Lab)

11:45 MgB2 thin films for SRF cavity applications - Xiaoxing Xi (Temple University)

12:00 Improvement of Nb Thin FIlm MIcrostructure by HiPIMS - Matthew Burton (The College of William & Mary)

12:15 Innovative thin film technologies for nano-engineering and optimizing Nb3Sn superconductor beyond state-of-the-art - Michela Sainato (UID)

12:30 Development of NbTiN based multi-layered structures for SRF applications - Anne-Marie Valente-Feliciano (Jefferson Lab)
12:00 University of Wisconsin Lab Tour (12:00 - 2:15 p.m.; **at capacity**)
University of Wisconsin Lab Tour (12:00 - 2:15 p.m.; **at capacity**)
12:00 - 14:15

12:30 Lunch (on your own, 12:30 - 2:00 p.m.)
Lunch (on your own, 12:30 - 2:00 p.m.)
12:30 - 14:00
14:00
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Testing and qualifying cryogenic safety valves at cold conditions - Pascal Erni (WEKA AG)

14:00 Magnetoresistance of The Cryogenic Linear Temperature Sensor - Qiumin Meng

14:00 Behaviour of ITER flowmeters under operating conditions: simulation and experimentation - François BONNE (CEA/SBT)

14:00 Theoretical analysis and coating thickness determination of a dual layer metal coated FBG sensor for Sensitivity Enhancement At Cryogenic Temperatures - Rajinikumar Ramalingam (Indian Institute of Technology Mandi)

14:00 Frequency loss Induced Quench Protection System for High Temperature Superconductors - Kikelomo Ijagbemi (National High Magnetic Field Laboratory)

14:00 Model-based PI tuning for the JT-60SA cryogenic system: experimental results - François BONNE (CEA/SBT) Christine Hoa (CEA SBT)

14:00 Development of femtosecond laser vacuum cryogenic system - Guopeng Wang

14:00 Capacitive density measurement for supercritical hydrogen - Thomas Funke (Technische Universitaet Dresden)

14:00 Pneumatic free valve actuators - Fridolin Holdener (shirokuma GmbH)

14:00 Flow balancing orifice for ITER Toroidal Field coil - Alexander Litvinovich (JSC NIIEFA)

14:00 Overview of a low exported force and torque measurement facility - Ryan Taylor (Ball Aerospace and Technologies)

14:00 Superconducting magnet control system of JT-60SA - Koji Kamiya (Quantum radiology Science and Technology)

14:00 A new cryogenic temperature measurement solution suitable for large installation and laboratory use. - Anthony ATTARD (CEA)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Remote monitoring system for the cryogenic system of superconducting magnets in the SuperKEKB Interaction Region - Kanae Aoki (KEK, High Energy Accelerator Research Organization)

14:00 Use of Profibus for cryogenic instrumentation at XFEL - Torsten Boeckmann (DESY)

14:00 Fermilab CMTF Multi-Level Cryogenic Distribution Control System - Liujin Pei (Fermi National Accelerator Laboratory)

14:00 The control system of a 2kW @20K helium refrigerator - Wei Pan (State Key Laboratory of Technologies in Space Cryogenic Propellants ,Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 ADS injector I cryogenic control system - ye rui (yer@ihep.ac.cn)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 The Connection of Refrigeration to a Superconducting Device with the Minimum amount of Cryogen - Michael Green (Lawrence Berkeley Laboratory)

14:00 The design of the new LHC connection cryostats - Arnaud Vande Craen (CERN)

14:00 Mobile Refrigeration System for Precool and Warmup of Superconducting Magnet - Santhosh Kumar Gandla (Sumitomo (SHI) Cryogenics of America, Inc.)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Computational Investigation of Superconducting Magnetic Energy Storage (SMES) Devices to Optimize Energy Density - Thomas Bullard (UES Inc.)

14:00 Research on High TCS project for Gobi Photovoltaic Development - Huey-liang Hwang (Shanghai Jiao Tong University) ChengChao Jin (Shanghai Jiao Tong University)

14:00 Study on the adjustment capability of the excitation system located inside superconducting machine electromagnetic shield - Dong Xia (Institute of Electrical Engineering, Chinese Academy of Sciences)

14:00 Design Optimization of a Superconducting Gas-Insulated Transmission Line - Peter Cheetham (Center for Advanced Power Systems)

14:00 Status of Cryogenic and Superconducting Components for MW-Class Electric Power Systems - Timothy Haugan (U.S. Air Force Research Laboratory)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Post-Delamination Structural Investigation of REBCO Superconducting Tape - Tanner Olson (University of Wisconsin-Eau Clarie)

14:00 Auger Electron Spectroscopy and Ar Sputtering for the Determination of Y2O3 Buffer Layer Thickness in REBCO Superconducting Tapes - Christopher Hopp (Materials Science & Engineering Program, University of Wisconsin-Eau Claire)

14:00 Commercial fabrication of 2G HTS Roebel cables using the “Punch-and-Coat” approach - Alexander Molodyk (SuperOx)

14:00 Comparative Study on the effect of Laser Energy Density on YGBCO and HGBCO Thin Film Prepared by PLD - Xiang Wu

14:00 Demonstration of New 3 to 4 mm Thin ReBCO-CORC Wires featuring 300 to 500 A/mm2 at 10T/4.2K - Tim Mulder (Twente Technical University (NL))
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Thermal-mechanical properties of epoxy-impregnated Nb3Sn composites for 15 T dipole magnets - Pei Li (Fermi National Accelerator Laboratory)

14:00 Niobium for Long-Length Fine-Filament Nb3Sn Conductors - Robert Barber (Shear Form, Inc.)

14:00 Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment - Robert Duckworth (Oak Ridge National Laboratory)

14:00 The study of high RRR value of wire in channel superconductor wire - kaijuan yan (Western superconducting technologies co., LTD)

14:00 Demonstration of a Wind and React Nb3Sn Solenoidal Coil Segment for MRI Application - Jacob Rochester (The Ohio State University)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Efficacy of Tantalum Tungsten Alloys for Diffusion Barrier Applications - David Smathers (H.C.Starck)

14:00 Effect of external contaminants on RRR of Nb3Sn strands for the HL-LHC Accelerator Upgrade Project - Lance Cooley (Fermilab)

14:00 The influence of processing methods and test methods on the n value of wire in channel superconductor wire - Kaijuan Yan

14:00 Optimized (Nb,Ti)3Sn multifilamentary wire with ZrO2 APCs for high Jc, high Bc2, and low AC loss - Jacob Rochester (The Ohio State University)

14:00 Advanced tube type Nb3Sn conductor in Hyper Tech - Xuan Peng (Hyper Tech Research Inc.)

14:00 Improvement of stability of Nb3Sn conductors and magnets by increasing specific heat - Xingchen Xu (Fermi National Accelerator Lab)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Current sharing, quench, and normal zone propagation in YBCO CORC cables - Milan Majoros (The Ohio State University)

14:00 Status of Round Robin Test for Tensile Test on REBCO Wires at Cryogenic Temperature - Nadezda Bagrets (Karlsruhe Institute of Technology – KIT)

14:00 AC losses of Round Superconducting Cables Subjected to Time-dependent and/or Rotating Magnetic Fields - Kun Dong (The Ohio State University)

14:00 YBCO pancake coils wound using electrically non insulated tapes: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T - Majoros Milan (The Ohio State University)
14:00 - 16:00
Room: Exhibit Hall AB
Contributions

14:00 Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables - Ted Collings (MSE, OSU)

14:00 Fabrication of long-length cable-in-conduit for superconducting magnets - Jeff Breitschopf (Texas A&M University)

14:00 Finite element investigation of the mechanical behavior of Twisted Stacked-Tape Cables exposed to large Lorentz loads - Federica Pierro (Tufts University)

14:00 DOCO-HTS-Roebel cables, a concept for higher currents - Wilfried Goldacker (Karlsruhe Institute of Technology)

14:00 Feasibility Analysis, Technical Challenges, and Potential Solutions for Cross-country Multi-Terminal Superconducting DC Power Cables - Aws Al-Taie (Florida State University)
15:00 Afternoon Break (3:00 - 4:00 p.m.)
Afternoon Break (3:00 - 4:00 p.m.)
15:00 - 16:00
Room: Cryo Expo, Exhibit Hall AB
16:00
16:00 - 17:45
Room: Madison Ballroom AD
Contributions

16:00 Cryogenic Testing of the Thermal Vacuum Chamber and Ground Support Equipment for the James Webb Space Telescope in Chamber A at Johnson Space Center - Michael DiPirro (NASA/Goddard Space Flight Center)

16:15 The Design and Testing of Large Cryogenic Space Radiators for the James Webb Space Telescope - Ryan Taylor (Ball Aerospace) Eric Marquardt (Ball Aerospace)

16:30 Thermal analysis of a prototype cryogenic polarization modulator for use in a space-borne CMB polarization experiment - Teruhito Iida (PTI CO., LTD.)

17:00 Zero Boil-Off Control Methods for Large Scale Liquid Hydrogen Tanks using Integrated Refrigeration and Storage - Bill Notardonato (NASA Kennedy Space Center)

17:15 Liquid Hydrogen Supported Foil Bearings for Launch Vehicle Propellant Densification - Robert Fuller (Barber-Nichols Incorporated)

17:30 Large Scale Production of Densified Hydrogen to the Triple Point and Below - Adam Swanger (NASA Kennedy Space Center)
16:00 - 17:45
Room: Madison Ballroom BC
Contributions

16:00 Serial testing of XFEL cryomodules: results of the cryogenic heat load measurements - Bernd Petersen (DESY)

16:15 SNS Proton Power Upgrade - Matthew Howell (UT Battelle/ORNL)

16:30 LCLS-II 1.3 GHz Cryomodule Design - Lessons Learned from Testing at Fermilab - Joshua Kaluzny (Fermilab)

16:45 Operational Experience from LCLS-II Cryomodule Testing - Benjamin Hansen (Fermilab)

17:15 Effects of Thermal Acoustic Oscillations On LCLS-II Cryomodule Testing - Benjamin Hansen (Fermilab)
16:00 - 17:45
Room: Hall of Ideas - GJ
Contributions

16:00 Experimental Effervescence Measurements of Nitrogen in Liquid Methane-Ethane Mixtures to Support an Extraterrestrial Submarine for Titan - Ian Richardson (Washington State University)

16:15 Low Temperature Binary Gas Mixtures - Glen McIntosh (McIntosh Cryogenics LLC)

16:30 Application of the Langmuir Probe Plasma Diagnostics into the Investigation of the Dielectric Properties of Cryogenic Gas Mixtures - Chanyeop Park (Georgia Institute of Technology)

16:45 The Dielectric Strength of Cryogenic Gas Mixtures for Various Sections in Shipboard Cryogenic Power Systems - Chanyeop Park (Georgia Institute of Technology)

17:00 Experimental Studies on the Cryogenic Dielectric Properties of Gas Mixtures for Superconducting Power Applications - Peter Cheetham (Center for Advanced Power Systems)

17:15 Cryogenic Thermal Conductivity of Gaseous Helium mixtures with Neon and Hydrogen at High Pressures - Jin-geun Kim (Center for Advanced Power Systems)

17:30 Transient model of carbon dioxide desublimation from nitrogen - Yaning Wang (Zhejiang University)
16:00 - 18:00
Room: Hall of Ideas - FI
Contributions

16:00 Influence of Minor Geometric Imperfections on Stirling Pulse Tube Cryocooler - Tao Fang (Georgia Institute of Technology)

16:15 Miniature PT Cryocooler Activated by Resonant Piezoelectric Compressor and Passive Warm Expander - Sergey Sobol (Technion - Israel Institute of Technology)

16:30 Study on the flow nonuniformity in a high capacity Stirling pulse tube cryocooler - Xiaokuan You (Institution of Refrigeration and Cryogenics, Zhejiang University)

17:00 Investigation on characteristics of inertance tube at different operating frequencies: coiled type and material - Shaoshuai Liu (Shanghai Institute of Technical Physics of Chinese Academy of Science)

17:15 Study on a three-stage cascade pulse tube cryocooler - Qinyu Zhao

17:30 Numerical and experimental study of an annular pulse tube used in the pulse tube cooler - Xiaomin Pang (Key Laboratory of Cryogenics, Chinese Academy of Sciences)

17:45 Displacer Diameter Effect in Displacer Pulse Tube Refrigerator - Shaowei Zhu (Institute of Refrigeration and Cryogenics, School of Mechanical Engineering, Tongji University)
16:00 - 18:00
Room: Lecture Hall
Contributions

16:00 [Invited] Cryogenically Cooled 1-MW Inverter - John Hull (Boeing Research & Technology)

16:30 A Review of Cryogenic Power Electronics Progress - Michael Hennessy (MTECH Laboratories, LLC)

16:45 Experimental Characterization of Gallium-Nitride Field-Effect Transistors at Cryogenic Temperatures and Application in Multilevel Inverter - Christopher Barth (University of Illinois at Urbana Champaign)

17:00 Development of high-temperature superconducting CORC® power transmission cable systems - Danko van der Laan (Advanced Conductor Technologies)

17:15 [Invited] Application of SMES for Hybrid-electric Power Systems - Charles Rong (U.S. Army Research Laboratory)

17:45 [Invited] Development of High Energy Density Superconducting-Magnetic-Energy-Storage (SMES) for Aerospace Electric Propulsion - Timothy Haugan (U.S. Air Force Research Laboratory)
16:00 - 18:00
Room: Hall of Ideas - EH
Contributions

16:00 [Invited] Pinning Landscape Enhancement by Means of Irradiation - Michael Eisterer (Atominstitut, Vienna University of Technology)

16:30 [Invited] Prospects for further improving Jc of Nb3Sn conductors - Xingchen Xu (Fermi National Accelerator Lab)

17:00 Reexamining the heat treatment of RRP® Nb3Sn and the potential for further improvements - Charlie Sanabria (NHMFL)

17:15 RRP® Nb3Sn Wire Optimization with Bruker-OST - Emanuela Barzi (Fermilab)

17:30 The development of high pinning site densities in multifilamentary PIT wires using the internal oxidation route - Peter Lee (Florida State University)

17:45 Novel Methods for Improving Nb$_3$Sn Powder in Tube Conductors for the FCC and Beyond - Chris Segal (National High Magnetic Field Laboratory)
18:00 Exhibitor Reception (6:00 - 7:30 p.m.)
Exhibitor Reception (6:00 - 7:30 p.m.)
18:00 - 19:30
Room: Cryo Expo, Exhibit Hall AB
Tuesday, 11 July 2017

07:50 Cryo Expo Open (9:00 - 5:00)
Cryo Expo Open (9:00 - 5:00)
07:50 - 07:55
Room: Exhibit Hall AB

07:55

07:55 - 08:15
Room: Madison Ballroom
08:15
08:15 - 09:00
Room: Madison Ballroom
Contributions

08:15 Liquid Air Energy Storage: How cryogenics can support a greener grid. - Richard Riley (Highview Power Storage)
09:00
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Research of the vapor cooled shield in cryogenic liquid storage - Liubiao Chen (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry) Junjie Wang (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)

09:00 Qualification of a vertical test cryostat for MLI performance tests between 20 to 60 K and 4.5 K - Valentina Venturi (CERN)

09:00 Development and testing of a thermal switch used in an integrated cooler system - Liubiao Chen (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry) Junjie Wang (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)

09:00 Cryogenic Upgrade of the Low Heat Load Liquid Helium Cryostat used to House the Cryogenic Current Comparator in the Antiproton Decelerator at CERN - Torsten Koettig (CERN)

09:00 Cryogenic Permeation of Helium and Hydrogen through Polymer Films - Kjell Westra (Washington State University)

09:00 Computational Fluid Dynamics Model of a 3D Printed Liquid Hydrogen Tank with Vapor Cooled Shielding for Use in Unmanned Aerial Vehicles - Patrick Adam (HYdrogen Properties for Energy Research (HYPER) Laboratory, Washington State University)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Effect Of Leading-edge Geometry And Thickness On The Performance Of Miniature Cryogenic Expansion Turbine - Changlei Ke Lianyou Xiong (Technical Institute of Physics and Chemistry, CAS) Nan Peng (Technical Institute of Physics and Chemistry, CAS) Liqiang Liu (Technical Institute of Physics and Chemistry of CAS-Academia Si)

09:00 A study of solid lubricant coating for gas bearing of turbine-expander - xingrui liu (Technical Institute of Physics and Chemistry CAS)

09:00 Thermodynamic Analysis on of Skid-Mounted Coal-bed Methane Liquefaction Device using Cryogenic Two-Phase Turbo-Expander - Lu Niu (State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University)

09:00 Optimization Design of Turbo-expander Gas Bearing for a 500W Helium Refrigerator - shanshan LI

09:00 Parametric studies on floating pad journal bearing for high speed cryogenic turboexpanders - Anindya Chakravarty (Bhabha Atomic Research Centre, India; Fermilab, USA)

09:00 Numerical and Experimental Study of the Performance Effect of Varying Vaneless Space in Turboexpander Nozzles - Lianyou Xiong (Technical Institute of Physics and Chemistry, CAS)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 The experimental optimization of the linear compressor for space 4K JT cooler - Yuexue Ma Juan Wang Yanjie Liu (Technical Institute of Physics and Chemistry CAS) Jianguo Li JingTao Liang

09:00 Numerical simulation of the heat and mass transfer within a sorption-compressor cell for cryogenic cooling - Yingzhe Wu (Zhejiang University)

09:00 Attenuation of cryocooler induced vibration in infrared imagers using multimodal tuned dynamic absorbers - Alexander Veprik (SCD)

09:00 Simulation of Diffusion Process of Contamination Gas in Pulse Tube Cryocooler - Xiaohua Zhang (Technical Institute of Physics and Chemistry, CAS) Houlei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Yuexue Ma

09:00 The study on the effect of gas contamination in stirling cooler - Chuanlin Yin

09:00 The study on high efficiency and low vibration flexure bearing stirling cooler - Chuanlin Yin
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Cryosorption of helium and nitrogen on activated carbon-combined experiment and simulation study - Hengcheng Zhang (Technical Institute of Physics and Chemistry of Chinese Academy of Sciences)

09:00 Numerical model of cryogenic gas dispersion with phase change of water - Jingfeng Li (Zhejiang University)

09:00 Modelling the Effects of Dissolved Helium Pressurant on a Liquid Hydrogen Rocket Propellant Tank - Ian Richardson (Washington State University)

09:00 Analytical analysis of mixture enthalpies - Nir Tzabar (Ariel University)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Production of LNG with an Active Magnetic Regenerative Liquefier - John Barclay (Emerald Energy NW, LLC.)

09:00 Thermodynamic characteristics of a novel wind-solar-liquid air energy storage system - Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)

09:00 Development of a rotary union for Gifford-McMahon cryocoolers utilized in a 10 MW Offshore Superconducting Wind Turbine - Jiuce Sun (Karlsruhe Institute of Technology)

09:00 Investigation of a working fluid for cryogenic energy storage systems. - Paweł Wojcieszak (Wroclaw University of Science and Technology)

09:00 Gas propagation following a sudden loss of vacuum in a pipe cooled by He I and He II. - Nathaniel Garceau (National Magnetic Field Labortory - FSU)

09:00 Design and Manufacturing of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine - Jiuce Sun (Institute for Technical Physics (ITEP))
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Design and experimental measurements of a Heisenberg Vortex Tube for hydrogen cooling - Elijah Shoemake (Washington State University) Carl Bunge (Washington State University)

09:00 Analytical and numerical performance models of a Heisenberg Vortex Tube - Carl Bunge (Washington State University )
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Superconducting Magnet Stability and Wire Insulations - Q.Y. Hu (Ningbo Jansen Mechanism Co., Ltd) X.Q. Duan (Ningbo Jansen Mechanism Co., Ltd)

09:00 Cooldown studies for the superconducting coils of the hybrid magnet at CHMFL - Yu Xie
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Balanced Design and Commissioning of a 500W@4.5K Helium Refrigerator and its Liquefier - Xiaofei Lu (Institute of Plasma Physics,Chinese Academy of Sciences)

09:00 Design, Fabrication, Installation and Commissioning of the Helium Refrigeration system Supporting Superconducting Radio Frequency Testing at Facility for Rare Isotope Beams at Michigan State University - Adam Fila (FRIB Michigan State University) Chinh Nguyen (FRIB Michigan State University)

09:00 The Progress on 2K Cryogenic System for Superconducting Cavity of SSRF II - Jieping Xu (Shanghai Institute of Applied Physics. CAS)

09:00 Commissioning and Testing of a new 4.5K Cold Box for JLab Cryogenic Test Facility - Thilan Wijeratne (Thomas Jefferson National Accelerator Facility)

09:00 An overview of a repair of internal leak in the cold box of Helium liquefier made by Linde - Zezhang Wang (National Institute of Metrology/China)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 The Effect of Geometric Parameters on Multi-stream Parallel Flow Plate-Fin Heat Exchangers’ Effectiveness and Pressure Loss - Peng Xu (The Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences) Weiping Zhu (Chinese Academy of Sciences)

09:00 Numerical investigation on shell side heat transfer and pressure drop in gas flow for spiral-wound heat exchangers - Qixiong Tang (Technical institute of physics and chemistry of CAS) M.Q Gong (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) X ZOU (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) G.F CHEN (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:00 Numerical and analytical modeling of cryogenic carbon capture in a de-sublimating heat exchanger - Zhitao Yu (University of Wisconsin-Madison)

09:00 The effect of the natural convection of supercritical helium on the temperature stability in cryogenic system - gang zhou (Technical Institute of Physics and Chemistry, CAS) Wei Pan (Technical Institute of Physics and Chemistry, CAS )

09:00 Experimental and Computational studies of Heat Transfer for Wall-type and Fin-type Heat Exchanger - Laifeng Li (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences) Dong Xu (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences) Hengcheng Zhang (Technical Institute of Physics and Chemistry, Chinese Academy o)

09:00 Designing Calculation and Experimental Study of Sub-atmospheric Plate-fin Heat Exchanger for Superfluid Helium Refrigeration System - Wang Kunxiang (The Technical Institute of Physics and Chemistry of the Chinese)
Morning Break (9:00 - 10:00 a.m.)
Morning Break (9:00 - 10:00 a.m.)
09:00 - 10:00
Room: Cryo Expo, Exhibit Hall AB
09:30
09:30 - 11:00
Room: Lecture Hall
Contributions

09:30 [Invited] Development toward all Superconducting Motors in Japan - Masataka Iwakuma (Kyushu University)

10:00 [Invited] Flux Pump Brushless Exciters for HTS Rotating Machines - Chris Bumby (Victoria University of Wellington)

10:30 [Invited] High Power Density Electric Motors for Electric Aircraft: Superconductor and Permanent Magnet Approaches - John Kells (magniX Technoliges Pty Ltd) Jason Chaffey (MagniX Technologies Pty Ltd)
09:30 - 11:00
Room: Hall of Ideas - EH
Contributions

09:30 [Invited] Description of temperature-, magnetic-field, and position-dependent current-voltage characteristics in high Tc superconducting long length coated conductors - Takanobu Kiss (Kyushu University)

10:00 REBCO cable AC loss, inter-tape resistance and critical current reduction for mechanical bending - Arend Nijhuis (University of Twente)

10:15 Calorimetric Measurements of Varying YBCO Conductors and Cables at High dB/dt in a Stator Machine Environment - John Murphy (University of dayton Research Institute)

10:30 Single-strand excitation for measuring current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla - Chris Kovacs (The Ohio State University)

10:45 Active acoustic quench detection for high-temperature superconductor wires and stacks - Maxim Marchevsky (Lawrence Berkeley National Laboratory)
11:00
11:00 - 12:15
Room: Madison Ballroom AD
Contributions

11:00 Air Liquide Turbo-Brayton refrigeration system commissioning - Cecile Gondrand (Air Liquide Advanced Technologies)

11:15 Superconducting transmission line for power distribution - Peter McIntyre (Texas A&M University)

11:30 Computational Electro Dynamic (CED) Analysis to Estimate the AC losses in High Temperature Superconducting Cables - Mohit Kalsia (Lovely Professional University)

11:45 Effect of electrical breakdown on critical current of second generation HTS tapes - Peter Cheetham (Center for Advanced Power Systems)

12:00 Recent Progress of HTS Application Prototypes in JST/Strategic Innovation Program - Kenichi Sato (Japan Science and Technology Agency)
11:00 - 12:00
Room: Madison Ballroom BC
Contributions

11:00 Commissioning of multistage cold compressor systems - Lutz Decker (Linde Kryotechnik AG)

11:15 Integration of Prototype Cryoviscous Compressor into SNS Cryogenic Test Facility for Demonstration Performance Characterization - Robert Duckworth (Oak Ridge National Laboratory)

11:30 Full-Scale Prototype Cryoviscous Compressor Demonstration at SNS Cryogenic Test Facility for ITER Vacuum System - Robert Duckworth (Oak Ridge National Laboratory)

11:45 Available Pressure Ratio of A Linear Compressor Based on Mechanical Phasor Model - Chaoxiang Duan
11:00 - 12:30
Room: Hall of Ideas - GJ
Contributions

11:00 Safety Studies on Vacuum Insulated Liquid Helium Cryostats - Christina Weber (Karlsruhe Institute of Technology)

11:15 Relief device sizing for helium and hydrogen applications - Rainer Soika (Linde Kryotechnik AG)

11:45 Cryogen Risk Assessment in Underground Mining - Justin Sivret (Laurentian University / MIRARCO)

12:00 Cryogenics for Mining Safety - Rohan Fernando (CDC-NIOSH)

12:15 Cryogenic safety in helium cryostat at CERN - Yann Leclercq (CERN) Vittorio Parma (CERN)
11:00 - 12:30
Room: Lecture Hall
Contributions

11:00 [Invited] Development of Superconducting PM Machines - Mitsuru Izumi (TOKYO UNIVERSITY OF MARINE SCIENCE AND TECHNOLOGY (TUMSAT))

11:30 AC Loss Analysis in Fully Superconducting Machines - Matthew Feddersen (University of Illinois, Urbana-Champaign)

11:45 Present Status of Turbo-Brayton Cycle Cooling System in Japan - Hirokazu Hirai (Taiyo Nippon Sanso Corporation)

12:00 Updated Survey of Cryogenic Cooling Technologies for Superconducting Power Systems - Michael Susner (Air Force Research Laboratory)

12:15 Overview of Cooling Technologies for Cryogenic Transportation Machines - Wolfgang Stautner (GE Global Research) Timothy Haugan (U.S. Air Force Research Laboratory)
11:00 - 12:30
Room: Hall of Ideas - EH
Contributions

11:00 Development of 2G HTS wire production at SuperOx - Alexander Molodyk (SuperOx)

11:15 [Invited] Intermediate Roebel cable lengths as a first HTS cable used in the HTS demonstrator accelerator type coil. - Anna Kario (Karlsruhe Institute of Technology, Institute for Technical Physics)

11:45 New ReBCO-CORC Cable-In-Conduit Conductors for 80kA@12T/4K with stainless steel and copper jackets for use in Fusion and Detector Magnets - Tim Mulder (CERN / Twente Technical University (NL))

12:00 Transposed, high current HTS cables made with reinforced, narrow Bi2212 wire - Alexander Otto (Solid Material Solutions, LLC)

12:15 Canted-Cosine-Theta accelerator magnets wound from high-temperature superconducting CORC® magnet wires - Danko van der Laan (Advanced Conductor Technologies)
12:30 Poster Session Lunch (12:30 - 1:00 p.m.)
Poster Session Lunch (12:30 - 1:00 p.m.)
12:30 - 13:00
Room: Cryo Expo, Exhibit Hall AB
13:00
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Numerical study of a novel coupled VM-PTC cryocooler with He3 as working fluid by Sage - Changzhao Pan (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China)

13:00 Liquid nitrogen cooling test with linear driven Stirling cryocooler - Junseok Ko (Korea Institute of Machinery & Materials)

13:00 Experimental progress of a 4K VM/PT hybrid cryocooler for pre-cooling 1K sorption cooler - Changzhao Pan (Technical Institute of Physics and Chemistry, CAS)

13:00 Numerical study of a VM type multi-bypass pulse tube cryocooler operating at 4K - Changzhao Pan (CAS Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)

13:00 Mixture Optimization for Mixed Gas Joule-Thomson Cycle - Jennifer Detlor (Solar Energy Laboratory)

13:00 Cooling Down Time Optimization of the stirling cooler - Ming Xia (Kunming Institute of Physics)

13:00 Characteristics of a 1.6 W Gifford-McMahon cryocooler with a double pipe regenerator - Shinji Masuyama (NIT, Oshima College)

13:00 Thermodynamic analysis and comparison of single-stage mixed-refrigerant Joule–Thomson cycle and reverse Brayton cycle for cooling 80 ~ 120 K temperature-distributed heat loads - Haocheng Wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

13:00 Performance estimation of an oil-less linear compressor unit for a new compact 2K Gifford-McMahon cryocooler - YOSHIKATSU HIRATSUKA (Sumitomo Heavy Industries, Ltd.)

13:00 Comparative Analysis of Linear motor geometry for a Stirling Cryocooler - Biju T Kuzhiveli (NIT Calicut)

13:00 Numerical Study of a Cryogen-free Vuilleumier Type Pulse Tube Cryocooler Operating below 10 K - Wei Dai

13:00 Modelling of a stirling cryocooler regenerator under steady and steady - periodic flow conditions using a correlation based method - Biju T Kuzhiveli (Centre for Advanced Studies in Cryogenics (CASC), Department of Mechanical Engineering, National Institute of Technology Calicut, India ,673601)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 CFD studied on heat transfer and pressure drop characteristics of an offset strip-fin heat exchanger in helium systems. - Jihao Wu ( Technical Institute of Physics and Chemistry Chinese Academy of Sciences, Beijing 100190,China) Qing Li (Technical Institute of Physics and Chemistry Chinese Academy of Sciences, Beijing 100190,China)

13:00 The Numerical Simulation and Experimental Comparison of Separator Cooling Systme for Helium - Wun-Rong Liao (National Synchrotron Radiation Research Center)

13:00 Entransy dissipation based-thermal resistance and exergy analysis on helium liquefier - Lianyou Xiong

13:00 Thermal-Mechanical Analysis on the Refrigerator Cold Box of the CFETR Coil Test Facility - Xiaogang Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:00 Thermodynamic analysis and economical evaluation of two 300-80 K precooling stage configurations for helium refrigeration and liquefaction cycle - Qingfeng Jiang (Institute of Plasma Physics, Chinese Academy of Sciences and University of Science and Technology of China)

13:00 Study of dynamic process of a large-scale helium refrigerator - Wei Pan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

13:00 Process Simulation for the LCLS-II Cryogenic Systems - Viswanath Ravindranath (SLAC National Accelerator Laboratory)

13:00 Development of a Dynamic Simulator for a 250 W@4.5 K Helium Refrigerator - Liqiang Liu (Technical Institute of Physics and Chemistry) Lianyou Xiong (Technical Institute of Physics and Chemistry, CAS)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Development of the HTS magnet system for Lorentz Force Velocimetry - Oleksii Vakaliuk (Technische Universität Ilmenau, Institute of Materials Engineering, Department of Inorganic-Nonmetallic Materials, Group of Materials research in or with Magnetic Fields)

13:00 Development of an Algorithm for Fault Recovery Time of Resistive Type Superconducting Fault Current Limiter used in SMES Applications - Abhinav Kumar (Lovely Professional University, Phagwara)

13:00 Modeling studies of cryogen free MRI magnets based on MgB2 and Nb3Sn superconductors - Milan Majoros (The Ohio State University)

13:00 Quench Detection and Protection of an HTS Coil - Owen Christianson (NDI)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Cryogenic electrical property of Cyanate ester/epoxy insulation material for fusion superconducting magnet - Xu Li (Technical Institute of Physics and Chemistry, CAS)

13:00 Competition between the significant scale lengths influing on the transport phenomena at very low temperature in InP semiconductor - ABDELHAMID EL KAAOUACHI (aFaculty of Sciences IbnZohr of Agadir, Physics department, BP 8106 8000 Agadir, Morocco)

13:00 Variable Range Hopping conduction in the insulating samples 70Ge: Ga p-type semiconductor at very low temperature - Abdelhamid El kaaouachi (University Ibn Zorh Faculty of Sciences, Agadir, Morocco)

13:00 Thermal expansion and magnetostriction measurements at cryogenic temperature using the strain gage method - Wei Wang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)

13:00 Prediction of critical current by artificial neural network of nano structured superconducting film - Kamran Muhammad (COMSATS Institute of IT)

13:00 Low Temperature Electrical Transport Studies on Fe Doped (110)-Oriented PrBa2Cu3O7 Thin Films. - Hom Kandel (University of Wisconsin-Parkside)

13:00 In-depth characterization of low temperature high voltage axial insulator breaks for the ITER cryogenic supply line - Stefano Sgobba (CERN)

13:00 The construction of the 1.8K high voltage electrical breakdown measuring system with GM cryocooler - Rongjin Huang (Technical Institute of Physics and Chemistry)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Niobium tube for superconducting RF cavities - Karl Hartwig (Texs A&M University)

13:00 Mechanical properties of AA2219-T8 at low temperatures - Huang Chuanjun (State Key Laboratory of Technologies in Space Cryogenic Propellants, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, PR China)

13:00 Experimental and numerical investigation on residual stress relaxation of 7050 aluminum alloy by cryogenic treatment - Zheng Jianpeng (The Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences (TIPCCAS)) Wang Junjie (The Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences (TIPCCAS))

13:00 Epoxy Tensile Testing at Cryogenic Temperatures - Wesley Johnson (NASA Glenn Research Center)

13:00 Fatigue and Fracture of Three Austenitic Stainless Steels at Cryogenic Temperatures - Dustin McRae (National High Magnetic Field Laboratory)

13:00 Properties and recrystallization behavior of copper - Jason Springs (Texas A&M University)

13:00 Comparison of cryorolling impacts on properties of 316LN stainless steel and non-oriented electrical steel - Alica Fedorikova (Technical University of Kosice)

13:00 Evaluation of the cryogenic mechanical properties of the insulation material for ITER Feeder superconducting joint - Zhixiong Wu (TIPC, CAS) Chuanjun HUANG (Technical Institute of Physics and Chemistry, Chinese Academy o) Rongjin Huang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Comparison Study of the Flux Pinning Enhancement of YBCO Superconductor with BZO and BZO + Y2O3 Mixed Phase Additions - Mary Ann Sebastian (AFRL / RQQM)

13:00 Promoting BaZrO3 nanorods splay strong and isotropic pinning in BaZrO3-Y2O3 double-doped YBCO thin films - Shihong Chen (The University of Kansas)

13:00 Effect of Y2O3 pinning on the magnetic properties of Y123 superconductor - Chengchao Jin (Shanghai Jiao Tong University)

13:00 Y2O3-doped YBCO Thin Films Prepared by Polymer-Assisted Fluorine-Free Metal Organic Deposition - Chengchao Jin (Shanghai Jiao Tong University)

13:00 Continuous transport and magnetization measurements on production coated conductors - Xinbo Hu (ASC, NHMFL, FSU)

13:00 Characterization of YBa2Cu3O7 thin films on miscut LSAT substrates - Pegah Mirabedini (UC Riverside)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Filament Damage in Bi2Sr2CaCu2O8-x (Bi-2212) Superconducting Wires as Revealed by External Etching - Jordan Egner-Schnitzler (Materials Science and Engineering Center, University of Wisconsin-Eau Claire)

13:00 Effect of sheath material and reaction overpressure on Ag extrusions into the TiO2 insulation coating of Bi-2212 round wire - Imam Hossain (National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida, FL 32310, USA)

13:00 Strong, high Je Bi2212 round wire - Alexander Otto (Solid Material Solutions, LLC)

13:00 Microstructure and superconducting properties of Bi,Pb-2223 thin films fabricated from alternately layered Bi,Pb-2212/Pb-Ca-Cu-O thin films - Akiyoshi MATSUMOTO (NIMS)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Growth rate of YBCO-Ag single grains grown by liquid-phase enriched top seeded melt growth - Jasmin Congreve (University of Cambridge)

13:00 Oxygen doping in MgB2 thin film and bulk samples - Danlu Zhang (The Ohio State University)
13:00 - 15:00
Room: Exhibit Hall AB
Contributions

13:00 Ferromagnetism and superconducting-like behavior in carbon allotropes - Nadina Gheorghiu

13:00 Signatures of excitonic and superconducting oscillations: Metal-insulator and insulator-metal transitions in thin carbon films and graphitic samples - Nadina Gheorghiu

13:00 Single Crystal Growth and Doping of Possible Cr analogues to Fe-based Superconductors - Michael Susner (Air Force Research Laboratory)

13:00 An Investigation of the Superconducting Properties of the beta-Mn (T1-xRx)3Al2C solid solutions - Michael Susner (Air Force Research Laboratory)

13:00 Growth of FeSe single crystals and fundamental characterization of doping and intercalation - Michael Susner (Air Force Research Laboratory)
15:00
15:00 - 17:00
Room: Madison Ballroom AD
Contributions

15:00 [Invited] Novel concept of 60-120 kW refrigerator - Part 2: 4-80K box - Sergiy Putselyk

15:30 Towards the conceptual design of the cryogenic system of the Future Circular Collider (FCC) - Laurent Tavian (CERN)

15:45 Main improvements of LHC Cryogenics Operation during Run 2 (2015-2018) - Laurent Delprat (CERN)

16:00 Refrigeration assessment of the existing cryogenic plants for the high luminosity upgrade of the Large Hadron Collider (LHC) - Daniel Alexander Berkowitz Zamora (CERN)

16:15 Commissioning and first cooldown of XFEL linac - Bernd Petersen (DESY)

16:30 First operation of the XFEL linac with the 2K cryogenic system - Tobias Schnautz (DESY)
15:00 - 17:00
Room: Madison Ballroom BC
Contributions

15:00 Effects of High Level Gamma Radiation Doses on Cernox(TM) Cryogenic Temperature Sensors - Scott Courts (Lake Shore Cryotronics, Inc.)

15:15 Experimental validation of a self-calibrating cryogenic mass flowmeter - Andreas Janzen (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)

15:30 Transition Edge Sensors for Quench Localization in SRF Cavity Tests - Torsten Koettig (CERN)

15:45 Overview of process control strategies for typical helium cryogenic warm compression stations at CERN - Marco Pezzetti (CERN)

16:00 Comparison of cryogenic process control strategies using simulation software and applied to a superconducting magnet test bench at CERN. - Marco Pezzetti (CERN)

16:15 Visualization of grid-generated turbulence in He II using PTV - Brian Mastracci (Florida State University, National High Magnetic Field Laboratory)

16:30 Cryogenic test facility instrumentation with fiber optic and fiber optic sensors for testing superconducting accelerator magnets - Antonella Chiuchiolo (CERN)

16:45 Coolant-free Cryogenic Mechanical Property Test System with Optical Windows - Zhang Hengcheng (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
15:00 - 16:45
Room: Hall of Ideas FI
Contributions

15:00 3D CFD Transient numerical simulation of superfluid Helium - Romain Bruce (CEA Saclay)

15:30 Numerical analysis of free convection in cold helium vapor flows in a long sloped pipe - Jaroslaw Fydrych (European Spallation Source ERIC) Slawomir Pietrowicz (Wroclaw University of Technology)

15:45 Equivalent Isentropic Expansion Efficiency of Real Fluid Subject to Concurrent Pressure Drop and Heat Transfer - Peter Knudsen (Facility for Rare Isotope Beams - Michigan State University)

16:00 Simulation on bubble shape and dynamics in liquid oxygen under magnetic field - Ruiping Zhang (Institute of Cryogenics and Refrigeration)

16:15 Lumped Multi-Bubble Analysis of Injection Cooling System for Storage of Cryogenic Liquids - Pritam Saha (Indian Institute of Technology Kharagpur)
15:00 - 17:00
Room: Lecture Hall
Contributions

15:00 [Invited] High in-field Ic and Low AC-loss with Low Cost Coated Conductors for Electric Propulsion Transportation in Japan - Teruo Izumi (Advanced Industrial Science and Technology)

15:30 [Invited] Targeted high-temperature superconductor wire characterization and selection for electric propulsion applications - Stuart Wimbush (Victoria University of Wellington)

16:00 [Invited] Development of 22kV HTS Triaxial superconducting bus - Nobuhiro Mido (SWCC SHOWA CABLE SYSTEMS CO., LTD.)

16:30 Design Aspects for DC-HTS Cables in Hybrid-Electric Propulsion Systems for Aircraft - Sonja Schlachter (Karlsruhe Institute of Technology)

16:45 Development of round flexible HTS CORC® wires for fault current limiting applications - Jeremy Weiss (Advanced Conductor Technologies)
15:00 - 17:15
Room: Hall of Ideas - EH
Contributions

15:30 Development of MgB2 superconductor wire and coils for practical applications at Hyper Tech Research - Michael Tomsic (Hyper Tech Research)

15:45 [Invited] Transport properties of IMD-processed 100 m class 6-filament MgB2 wire and solenoid coil - Dongliang Wang (Institute of Electrical Engineering, CAS)

16:15 Effect of Carbon and Dy2O3 co-doping on the Critical Field and Transport of MgB2 wires - Fang Wan (The Ohio State University)

16:30 Structure and superconducting characteristics of magnesium diboride; substitution of boron atoms to oxygen and carbon. - Tatiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)

16:45 The Development of Persistent joints for MgB2 Conductors - Chris Kovacs (The Ohio State University)

17:00 Doping Effect of Dy2O3 on the Phase Formation in the MgB2 Wire Prepared by Advanced Internal Magnesium Infiltration (AIMI) Method - Fang Wan (The Ohio State University)
15:00 - 17:00
Room: Hall of Ideas - GJ
Contributions

15:00 Mechanical and axial fatigue behavior of 18 percent Nickel Maraging steel C250 for cryogenic applications - Shreyas Balachandran (National High Field Magnet Laboratory) Robert Walsh (Florida State University)

15:15 The influence of cryorolling conditions on the mechanical properties and microstructure of 316LN austenitic stainless steel - Tibor Kvačkaj (Technical University of Kosice)

15:30 Deformation behaviour and microstructure of a Ni-Mo-Cr alloy at cryogenic temperatures - Jan Sas (The Karlsruhe Institute of Technology)

15:45 Axial Fatigue Life of Three Austenitic Steels at 4 K - Robert Walsh (Florida State University)

16:00 Influence of ultrafine-grained copper by ECAP on thermal properties at cryogenic conditions - Klaus-Peter Weiss (KIT, Institute for Technical Physics)

16:15 Temperature dependence on tensile properties of Cu-40mass%Fe dual phase alloy - Norimitsu Koga (Yokohama National University)

16:30 Crystallographic Orientation Analysis of Facets in Ti-5Al-2.5Sn ELI Forged Alloy - Yoshinori Ono (National Institute for Materials Science)

16:45 Effect of Thermomechanical Processing of 316LN Austenitic Stainless Steel on Microstructure and Mechanical Properties at Cryogenic Temperatures - Pavel Podany (COMTES FHT a.s.)
17:00 Free Time (5:00 - 7:00 p.m.)
Free Time (5:00 - 7:00 p.m.)
17:00 - 19:00

19:00 Banquet/Farewell Event (7:00 - 9:00 p.m.)
Banquet/Farewell Event (7:00 - 9:00 p.m.)
19:00 - 21:00
Room: Rooftop Garden
Wednesday, 12 July 2017

06:30 4.2K Fun Run
4.2K Fun Run
06:30 - 07:30

07:50 Exhibit Open (9:00 a.m. - 12:00 p.m.)
Exhibit Open (9:00 a.m. - 12:00 p.m.)
07:50 - 07:55
Room: Exhibit Hall AB

07:55

07:55 - 08:15
Room: Madison Ballroom
08:15
08:15 - 09:00
Room: Madison Ballroom
Contributions

08:15 The Pursuit of Low Cost Access to Space: An Introduction to Blue Origin - Ron Bliesner (Blue Origin)
09:00
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Impact of Varying Acceleration to the Performance of Stirling-Type Pulse Tube Cryocooler - Jinze Li (CAS TPIC)

09:00 Pulse tube phase shifter with separating membrane - Jean-Marc duval (CEA)

09:00 The study on a gas-coupled two-stage Stirling-type tube cryocooler - xianlin wu (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS) Junjie Wang (Technical Institute of Physics and Chemistry, CAS)

09:00 Two-stage high frequency pulse tube refrigerator with base temperature below 10 K - Liubiao Chen (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry) Changzhao Pan (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry) Junjie Wang (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)

09:00 Investigation of single stage high-efficiency stirling-type pulse tube cryocooler below 20K - Qianglong Zhu

09:00 Investigation on a two-cold-finger pulse tube cryocooler - Jia Quan (Key Laboratory of Space Energy Conversion Technologies, Technical Institute of Physics and Chemistry)

09:00 Performance of high frequency miniature pulse tube cryocooler with different cold fingers - Jia Quan (Key Laboratory of Space Energy Conversion Technologies, Technical Institute of Physics and Chemistry)

09:00 Study on a 85Hz 10W@80K coaxial pulse tube cryocooler to be used in space - Nailiang Wang (Technical Institute of Physics and Chemistry, CAS)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 CFD Modeling of a helium cryogenic pulsating heat pipe - chen xu (uw-madison)

09:00 Thermal conductance characterization of the SuperCDMS-SNOLAB cryogenic conduction stem components - Ram Dhuley (Fermilab)

09:00 Study on Oscillating Heat Transfer in Heater and Cooler of β-type Free-Piston Stirling Engine - Mingqiang Lin (Technical Institute of Physics and Chemistry)

09:00 New flow pattern transition of R600a in a horizontal smooth tube - Zhiqiang Yang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences;University of Chinese Academy of Sciences)

09:00 Radiative cooling of the PVLAS Fabry-Perot cavity mirrors - Ruggero Pengo (Universita e INFN, Legnaro (IT))

09:00 Thermal conductivity studies of epoxy-aluminium composites between 4.5 K to 300 K for the development of cryosorption pumps - Ravi Verma (INDIAN INSTITUTE OF SCIENCE)

09:00 Experimental study of Large-scale cryogenic Pulsating Heat Pipe - Maria Barba Romain Bruce (CEA Saclay) Bertrand Baudouy (CEA Saclay)

09:00 A helium pulsating heat pipe for conduction-cooled superconducting magnets - dong Xu (Key Laboratory of Cryogenics, TechnicalInstitute ofPhysics and Chemistry, ChineseAcademy of Sciences) monan Li (Key Laboratory of Cryogenics, TechnicalInstitute ofPhysics and Chemistry, ChineseAcademy of Sciences) huiming Liu (Key Laboratory of Cryogenics, TechnicalInstitute ofPhysics and Chemistry, ChineseAcademy of Sciences) laifeng Li (Key Laboratory of Cryogenics, TechnicalInstitute ofPhysics and Chemistry, ChineseAcademy of Sciences)

09:00 Conceptual study of the cryostats for the cold powering system for the triplets of the High Luminosity LHC - Amalia Ballarino (CERN) Yann Leclercq (CERN)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Preliminary Requirements Cryogenic Loads for the electron Ion Collider at BNL - Roberto Than (Brookhaven National Lab)

09:00 Design of Cryogenic System for SBN Near Detector at Fermilab - Frederick Schwartz (Fermilab)

09:00 Status on conceptual design of the CEPC cryogenic system - shaopeng Li (IHEP)

09:00 Upgrade of the spoke test cavity station - PIP II - Vincent Roger (Fermilab)

09:00 Assembly and Commissioning of the helium cryogenic system for the hybrid superconducting outsert at CHMFL - JunJie LI (High Magnetic Field Laboratory, Chinese Academy Sciences)

09:00 Commissioning of Cryogenic System for China Spallation Neutron Source - Bin Ye

09:00 Force cooled Quench Tanks for the ITER cryogenic system - Grigory Kouzmenko (F4E)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Design and Manufacturing of the Mu2e Cryogenic Distribution Box - Edward Bonnema (Meyer Tool & Mfg., Inc.)

09:00 The helium recovery and purification system at the IHEP (The Institute of High Energy Physics of the Chinese Academy of Sciences） - zhuo Zhang (IHEP)

09:00 A maintenance strategy for a multi-valve cryogenic distribution system - Jaroslaw Fydrych (European Spallation Source ERIC) Guido Consogno (WEKA AG)

09:00 Cryogenic transfer line coupling for ITER vacuum pumping system - Michael Boersch (WEKA AG) Guido Consogno (WEKA AG)

09:00 Status of the ITER Cryodistribution - Hyun-Sik CHANG (ITER Organization)

09:00 Cryogenic transfer line for the hybrid superconducting outsert at CHMFL - Zheng Rong Ouyang (CHMFL)

09:00 Cold Test and Performance Evaluation of Prototype Cryoline-X - Nitin Shah (ITER-India (Institute for Plasma Research)) Vincent Billot (Air Liquide Advanced Technologies) Ketan Choukekar (ITER-India (Institute for Plasma Research))

09:00 Simulation and experimental research of heat leakage of cryogenic transfer lines - Wei Pan (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 Development and Testing of High Temperature Superconducting (HTS) field coil for HTS Motors - V A S Muralidhar Bathula (Corporate R & D, Bharat Heavy Electricals Limited, Vikasnagar, Hyderabad - 500093, India)

09:00 The effect of condenser temperature for internal pressure in a closed loop thermosyphon cooling system for HTS motor. - Kota Yamaguchi (Tokyo University of Marine Science and Technology)

09:00 Comparison of estimated and experimental results of temperature distribution in a thermosyphon cooling system - Erasmus Shaanika (Tokyo University of Marine Science and Technology)

09:00 Coupled Cryogenic Thermal and Electrical Models for Transient Analysis of Superconducting Power Systems - Sharath Satyanarayana (Florida State University)
09:00 - 11:00
Room: Exhibit Hall AB
Contributions

09:00 New heat transfer model for Hydrocarbons flow condensation inside horizontal tubes - Gaofei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:00 Investigation of transient chill down phenomena in pipes using liquid nitrogen - Milind Atrey (Indian Institute of Technology, Bombay)

09:00 Aanlysis of the Effect of Natural Convection on Sample Temperature Fluctuation Cooled by GM Cryocooler - Kongrong Li (Technical Institute of Physics and Chemistry)

09:00 Liquid Hydrogen Recirculation System for Forced Flow Cooling Test of Superconducting Cables - Yasuyuki Shirai (Kyoto University)

09:00 Experimental study on micro-solid particulate spray vitrification for biological material long-term preservation. - Slawomir Pietrowicz (Wroclaw University of Science and Technology)

09:00 DNB heat flux in forced convection of liquid hydrogen for a wire set in central axis of vertically mounted flow channel - Taito Matsumoto (Kyoto University)

09:00 Numerical and experimental investigations of condensation heat transfer of R170 in a horizontal smooth tube - Qinglu Song (University of Chinese Academy of Sciences)
Morning Break (9:00 - 10:00 a.m.)
Morning Break (9:00 - 10:00 a.m.)
09:00 - 10:00
Room: Cryo Expo, Exhibit Hall AB
09:30
09:30 - 11:00
Room: Lecture Hall
Contributions

09:30 [Invited] Vortex pinning landscape in low cost chemical solution Nanocomposite YBa2Cu3O7-x coated conductors - Teresa Puig (ICMAB-CSIC)

10:00 [Invited] Different nature of flux pinning in Fe-based superconductors - Chiara Tarantini (ASC-NHMFL, Florida State University)

10:30 A route for simultaneous increase of Tc and Jc in FeSe0.5Te0.5 superconducting films by low-energy proton irradiation - Toshinori Ozaki (Kwansei Gakuin University)

10:45 Suppression of Magnetization and Creep in Bi2212 strands - Cory Myers (Ohio State University)
09:30 - 10:45
Room: Hall of Ideas - EH
Contributions

09:30 Measurements of YBCO Cable at High dB/dt for various HTS cables - Mike Sumption (The Ohio State University)

09:45 Development of stable, low resistance solder joints for space-flight HTS lead assemblies - Edgar Canavan (NASA–Goddard Space Flight Center)

10:00 Loss Characteristics of Coated Conductors in Alternating Magnetic Fields: Dynamic Loss and Magnetisation Loss - QUAN LI (University of Edinburgh)

10:15 Electromagnetic field analyses of cated conductors assembled into large-current cables - Naoyuki Amemiya (Kyoto University)

10:30 REBCO Roebel cable stability, current sharing, and quench measurements in a liquid helium bath and applied magnetic fields up to 12 Tesla - Chris Kovacs (The Ohio State University)
11:00
11:00 - 12:15
Room: Hall of Ideas - GJ
Contributions

11:00 A Computational Approach of 1D and 2D/3D CFD Coupled Model - Tao Fang (Georgia Institute of Technology)

11:15 Role of Size on the Relative Importance of Fluid Dynamic Losses in Linear Cryocoolers - Carl Kirkconnell

11:30 Performance improvement in a Stirling cooler with Methane as a condensable component in Helium-Methane mixture as working fluid for refrigeration temperature about 130 K - Shridhar Bapat (Professor, Department of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai, India)

11:45 Acoustic field characteristics in a free piston Stirling cryocooler with high cooling capacity - Guoyao Yu (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

12:00 A Performance Analysis on Free-piston Stirling Crycooler based on an Idealized Mathematical Model - Yongxiang Guo (Zhejiang University)
11:00 - 12:30
Room: Madison Ballroom AD
Contributions

11:00 FRIB Cryogenic Systems Status - Peter Knudsen (MSU-FRIB)

11:15 Specification of the 2nd cryogenic plant for RAON - Sungwoon Yoon (Institute for basic science)

11:30 Performance of the JT-60SA cryogenic system under pulsed heat loads during acceptance tests - Christine Hoa (CEA INAC-SBT)

11:45 ITER CSMC refrigerator model using Modelica - Roberto Zanino (Politecnico di Torino)

12:00 Dynamic Simulation of Relief Line during Loss of Insulation Vacuum of the ITER Cryoline - Hyun-Sik Chang (ITER Organization)

12:15 Refrigerator and recirculator system supplied by Linde Kryotechnik AG for U.S. ITER central solenoid module fabrication program - Jan Hildenbeutel (Linde Kryotechnik AG)
11:00 - 12:15
Room: Madison Ballroom BC
Contributions

11:00 Progress of Cryogenic Pulsating Heat Pipes at UW-Madison - Luis Fonseca (University of Wisconsin Madison)

11:15 Parametric study on the thermal performance of beam screen samples of the High-Luminosity LHC upgrade - Patricia Borges De Sousa (CERN)

11:30 Thermal Interface Material Characterization for Cryogenic Electronic Packaging Solutions - Alison Dillon (Northrop Grumman)

11:45 The application of interference fits for overcoming limitations in clamping methodologies for cryo-cooling first crystal configurations in X ray monochromators - Peter Docker (Diamond light source)

12:00 Numerical Investigation on Pulsating Heat Pipes with Nitrogen and Hydrogen - Dongyang Han (Institute of Cryogenics and Refrigeration, Zhejiang University, Hangzhou 310027, China)
11:00 - 13:00
Room: Lecture Hall
Contributions

11:00 [Invited] Interactive approach towards controllable generation of strong and isotropic artificial pinning centers in RE-123 films - Judy Wu (University of Kansas)

11:30 Fabrication of 2G HTS wires with artificial pinning centres using production scale PLD system and characterisation of their superconducting properties - Vsevolod Chepikov (SuperOx)

11:45 Towards isotropic vortex pinning in YBCO films with BHO-Y2O3 and BZO-Y2O3 artificial pining centers - Bibek Gautam*1 (1Department of Physics and Astronomy, University of Kansas, Lawrence, Kansas 66045, USA)

12:00 Large critical current densities and pinning forces in CSD YxGd1-xBa2Cu3O7-BaHfO3 superconducting nanocomposite films - PABLO CAYADO (Karlsruhe Institute of Technology (KIT))

12:15 Influence of Zr addition on J¬c and flux creep in (Gd,Y)BCO tape - Cory Myers (Ohio State University)

12:30 [Invited] Improvement of Jc of Nb3Sn conductors by introducing additional pinning centers - Xingchen Xu (Fermi National Accelerator Lab)
11:00 - 12:30
Room: Hall of Ideas - EH
Contributions

11:00 [Invited] Direct writing of High-TC Josephson Junctions with Focused Helium Ion BEams - Shane Cybart (UC Riverside)

11:30 Focused Helium Ion Beam Irradiated Josephson Junctions and Arrays - Yuchao Zhou (University of California, Riverside)

11:45 [Invited] Terahertz emission from the intrinsic Josephson junctions of high-symmetry thermally-managed BSCCO microstrip antennas - Richard Klemm (University of Central Florida)

12:15 Tunable Broadband Radiation Generated Via Ultrafast Laser Illumination of an Inductively Charged Superconducting Ring - Thomas Bullard (UES Inc - AFRL/RQQM)
12:00 University of Wisconsin Lab Tour (12:00 - 2:15 p.m.; **at capacity**)
University of Wisconsin Lab Tour (12:00 - 2:15 p.m.; **at capacity**)
12:00 - 14:15

12:30 Lunch (on your own, 12:30 - 2:00 p.m.)
Lunch (on your own, 12:30 - 2:00 p.m.)
12:30 - 14:00
14:00
14:00 - 15:30
Room: Hall of Ideas - FI
Contributions

14:00 Software development kit for a compact cryo-refrigerator - Jeffrey Gardiner (Quantum Design)

14:15 Periodic Flow Hydrodynamic Resistance Parameters for Woven Screen Matrices at Cryogenic Temperatures - Matthew Perrella (Georgia Institute of Technology)

14:30 Performance Improvement of a Large Capacity GM Cryocooler - Chao Wang (Cryomech, Inc.)

14:45 Development of zinc-plated regenerator material - Mingyao Xu (Sumitomo Heavy Industries, Ltd.)

15:00 Lagrangian Description of the Oscillating Flow in Regenerator of High-Frequency Pulse Tube Refrigerator - Liang Chen (Xi'an Jiaotong University) Lu Niu (State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University)

15:15 The influence of pressure ratio on the regenerator performance - Yuzhe Lin (Tongji University) Shaowei Zhu (School of Mechanical Engineering, Tongji University)
14:00 - 15:45
Room: Madison Ballroom BC
Contributions

14:00 Repeatability Measurements of Apparent Thermal Conductivity of Multi-layer Insulation (MLI) - Mark Vanderlaan (NHMFL)

14:15 Repeatability Testing of Cryogenic Multilayer Insulation - Wesley Johnson (NASA Glenn Research Center)

14:30 Heat Loads Due to Small Penetrations in Multilayer Insulation Blankets - Wesley Johnson (NASA Glenn Research Center)

14:45 Thermal conductivity of aerogel blanket insulation under cryogenic-vacuum conditions in different gas environments - James Fesmire (NASA)

15:00 Investigations of Heat Transfer in Vacuum Between Room Temperature and 80 K - Joshua Hooks (LeTourneau University)

15:15 Outgassing characteristics of various materials in the vacuum jacket of the large liquefied hydrogen vessel - Akihiko Inomata (Kobe University, Kawasaki Heavy Industries)

15:30 Parametric study for use of stainless steel as a material for thermal shield in PIP2IT transferline at Fermilab - Tejas Rane (BARC, Mumbai, India; Fermilab, USA)
14:00 - 15:45
Room: Madison Ballroom AD
Contributions

14:00 Upgrade of the cryogenic infrastructure of SM18, CERN main test facility for superconducting magnets and RF cavities - Antonio Perin (CERN)

14:30 Real-Time Helium Inventory Monitoring of JLab Cryogenic Systems - Nusair Hasan (Thomas Jefferson National Accelerator Facility)

14:45 Applicability of ASST-A Helium Refrigeration System for JLab End Station Refrigerator Upgrade - Nusair Hasan (Thomas Jefferson National Accelerator Facility)

15:00 4K Helium Refrigerators for Commercial Superconducting Accelerators - Joseph Yancey (Niowave Inc.)

15:15 Outsourcing strategy and tendering methodology for the operation and maintenance of CERN’s cryogenic facilities - Luigi Serio (CERN)

15:30 Model-based minimization algorithm of a supercritical helium loop consumption subject to operational constraints - François BONNE (CEA/SBT) Christine Hoa (CEA SBT)
14:00 - 16:00
Room: Hall of Ideas - GJ
Contributions

14:00 Study of Nitrogen Two-phase Flow Pressure Drop in Horizontal and Vertical Orientation - Torsten Koettig (CERN)

14:15 Experimental study of a two-phase nitrogen natural circulation loop - Bertrand Baudouy (CEA Saclay)

14:30 Numerical Study of Evaporation and Motion Characteristics of Liquid Nitrogen Droplet in High-Speed Gas Flow - Yixiao Ruan

14:45 CFD Modeling of Liquid Nitrogen Spray Cooling - Yixiao Ruan

15:00 Relations between unsteady behaviors and shock waves in cavitating liquid nitrogen flows through a transparent venturi tube - Jiakai Zhu (Institute of Refrigeration and Cryogenics, Zhejiang University)

15:15 Experimental study on cavitating flow of liquid nitrogen over a three-dimensional hydrofoil - Xiaobin Zhang (Zhejiang University)

15:30 A comparative study on cavitation models for simulating the cavitating flow in liquid nitrogen spray nozzle - Rong Xue (Xi'an Jiaotong University) Yixiao Ruan (State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University)

15:45 Numerical study on the flow and heat transfer characteristics of slush nitrogen in a corrugated pipe - Tao Jin (Institute of Refrigeration and Cryogenics, Zhejiang University)
14:00 - 16:00
Room: Lecture Hall
Contributions

14:00 [Invited] Enhanced pinning in heavily-doped REBCO coated conductors - Xiao-Fen Li (University of Houston)

14:30 [Invited] Enhancing Flux Pinning of Y-Ba-Cu-O Superconducting Thin Films at ≤ 30 K and H ≥ 3 T - Mary Ann Sebastian (U.S. Air Force Research Laboratory)

15:00 [Invited] Modeling and simulation of flux pinning of REBCO thin films with artificial pinning centers - Kaname Matsumoto (Kyushu Institute of Technology)

15:30 [Invited] Correlated and random pinning behaviors in Sm123 tapes with nanorods - Satoshi Awaji (Tohoku University)
14:00 - 16:00
Room: Hall of Ideas - EH
Contributions

14:00 [Invited] Advances in Superconducting Device Fabrication from Nanowire Detectors to Large-Scale Integrated Circuits - Eric Dauler (MIT Lincoln Laboratory)

14:30 [Invited] Development of Current Biased Superconducting Stripline Detectors and Signal Processing Circuits Compatible with Standard SFQ Foundry Processes - Ali Bozbey (TOBB University of Economics and Technology)

15:00 [Invited] Multi-pixel superconducting nanowire single-photon detectors with cryogenic signal processors using single-flux-quantum circuits - Terai Hirotaka (National Institute of Information and Communications Technology)

15:30 Digital Readout of Cryogenic Detectors using Superconductor Integrated Circuits - Timur Filippov (HYPRES)

15:45 A 4 K Tactical Cryocooler Using Reverse-Brayton Machines - Mark Zagarola (Creare LLC)
16:00 Afternoon Break (4:00 - 4:15 p.m.)
Afternoon Break (4:00 - 4:15 p.m.)
16:00 - 16:15
Room: Grand Terrace
16:15
16:15 - 17:30
Room: Madison Ballroom AD
Contributions

16:15 Design of the Continuous Adiabatic Demagnetization Refrigerators for the Primordial Inflation Explorer (PIXIE) - Peter Shirron (NASA/GSFC)

16:30 Development of a space-flight ADR providing continuous cooling at 50 mK with heat rejection at 10 K - James Tuttle (NASA/GSFC)

16:45 Mechanical Design of a 4-Stage ADR for the PIPER Mission - Bryan James (NASA)

17:00 Passive gas-gap heat switches for use in low-temperature cryogenic systems - Mark Kimball (NASA/Goddard Space Flight Center)

17:15 Thermal characterization of 50 mK adiabatic demagnetization refrigerator for space - Jean-Marc duval (CEA)
16:15 - 18:00
Room: Madison Ballroom BC
Contributions

16:15 Status of the LBNF Cryogenic System - David Montanari (Fermi National Accelerator Lab. (US))

16:30 The cryogenic design of the SuperCDMS-SNOLAB experiment - Matthew Hollister (Fermi National Accelerator Laboratory)

16:45 Final design of a cost-optimized 100 tpd hydrogen liquefier - Umberto Cardella (Linde Kryotechnik AG)

17:00 Design of the Cryogenic Systems for the Near and Far LAr-TPC Detectors of the Short Baseline Neutrino Program (SBN) at Fermilab - Michael Geynisman (Fermi National Accelerator Laboratory)

17:15 Study of the cascade utilization of compressor waste heat in a cryogenic air separation unit - Ruiping Zhang (Institute of Cryogenics and Refrigeration)

17:30 Operational Present Status and Reliability Analysis of the Upgraded EAST Cryogenic System - XiaoFei Lu (Institute of Plasma Physics, Chinese Academy of Sciences)

17:45 First operational experience with the HIE-Isolde helium cryogenic system including several RF cryo-modules - Nicolas Guillotin (CERN)
16:15 - 17:45
Room: Hall of Ideas - GJ
Contributions

16:15 Micro-structured heat exchanger for cryogenic mixed refrigerant cycles - David Gomse (Karlsruhe Institute of Technology)

16:30 A numerical model for boiling heat transfer coefficient of zeotropic mixtures - Rodrigo Barraza Vicencio (Department of Mechanical Engineering, Universidad Tecnica Federico Santa Maria)

16:45 Pressure Drop Based on Two Phase Flow Patterns for Hydrocarbons in Horizontal Smooth Tubes - Gaofei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

17:00 Numerical study of longitudinal inclination effect on a tubular BOG heat exchanger - Yan Yan (Southeast University)

17:15 Numerical investigation of cryogen re-gasification in a plate heat exchanger - Ziemowit Miłosz Malecha (Wroclaw University of Science and Technology)

17:30 Influence on the performance of cryogenic counter-flow heat exchangers due to longitudinal conduction, heat in-leak and property variations - Qingfeng Jiang (Institute of Plasma Physics, Chinese Academy of Sciences and University of Science and Technology of China)
16:15 - 17:45
Room: Lecture Hall
Contributions

16:15 Evaluation of the Fretting Resistance of the High Voltage Insulation on the ITER Magnet Feeder Busbars - David Evans (ITER Organisatiion)

16:30 Performance of Vacuum Epoxy Impregnated 2G-HTS Undulator Magnets - Ibrahim Kesgin (Argonne National Laboratory)

16:45 Investigation on the Crack Propagation Behaviour of Kevlar®-49/Epoxy Laminate at Room and Cryogenic Temperatures for Aerospace Applications - Danish Handa (Lovely Professional University)

17:00 A high field and cryogenic test facility for neutron irradiated superconducting wire - Arata Nishimura (National Institute for Fusion Science)

17:15 Low cost high performance magnetocaloric materials for sub 50K refrigeration applications - Robin Ihnfeldt (General Engineering & Research)

17:30 Study of metallurgical factors in improving service life of wire drawing carbide dies using cryogenic treatment - Shreyas Joglekar (Government College of Engineering, Pune)
16:15 - 18:15
Room: Hall of Ideas - EH
Contributions

16:15 [Invited] Development of Silver-Sheathed Bi2223 Superconducting Wires - Goro Osabe (Sumitomo Electric)

16:45 [Invited] Development of Bi-2212 round wire for high field magnet applications - Hanping Miao (Bruker-OST)

17:15 Advances in Bi-2212 Conductor Development Directed Toward High-Field Magnet Applications - Eric Hellstrom (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)

17:30 Reinforced, high current density Bi2212 wire for transposed cables and solenoidal coils - Alexander Otto (Solid Material Solutions, LLC)

17:45 Characterization of reinforced Bi-2212 conductors for high field magnet applications - Michael Brown (Florida State University)

18:00 Influence of Twist Pitch on Hysteretic Losses and Transport Jc in Overpressure Processed Bi-2212 Round Wires - Yavuz Oz (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)
19:00 Concert on the Square (open for all attendees, 7:00 - 9:00 p.m.)
Concert on the Square (open for all attendees, 7:00 - 9:00 p.m.)
19:00 - 21:00
Thursday, 13 July 2017

07:45

07:45 - 07:55
Room: Madison Ballroom
07:55
07:55 - 08:40
Room: Madison Ballroom
Contributions

07:55 What Productization of SuperConducting Electronics Requires of the Cyro-cooler Community - Deborah Van Vechten (US Office of Naval Research)
08:40

08:40 - 08:45
Room: Madison Ballroom

08:45 Morning Break (8:45 - 9:30 a.m.)
Morning Break (8:45 - 9:30 a.m.)
08:45 - 09:30
Room: Grand Terrace
09:30
09:30 - 11:00
Room: Hall of Ideas - GJ
Contributions

09:30 [Invited] Heat Switch Technology for Thermal Management in Cryogenic Devices - QuanSheng Shu (Senior Scientist (Retired))

10:00 The scope of additive manufacturing in cryogenics, component design and applications - Wolfgang Stautner (GE Global Research) Srinivas Vanapalli (University of Twente, Enschede, Netherlands)

10:15 Pyrogenics: applying techniques of cryogenics to high-temperature molten salt - Peter McIntyre (Texas A&M University)

10:30 Interferometric study on the mass transfer in cryogenic distillation under magnetic field - Shiran Bao (Zhejiang University)

10:45 Modeling of Combined Heat Transfer in an all Solid State Optical Cryocooler - Biju Kuzhiveli (Centre for Advanced Studies in Cryogenics (CASC), Department of Mechanical Engineering, National Institute of Technology, Calicut)
09:30 - 11:30
Room: Madison Ballroom BC
Contributions

09:30 Conceptual design of the cryostat for the new high luminosity (HL-LHC) triplet magnets - Delio Duarte Ramos (CERN)

09:45 Detector Magnets proposed for the Future Circular ee+ and pp Colliders - Herman Ten Kate (CERN)

10:00 A Second-Generation Superconducting Undulator Cryostat for the APS - Joel Fuerst (ANL)

10:15 The Potential Role of Cryogenics in Wiggler and Undulator Magnets - Michael Green (Lawrence Berkeley Laboratory)

10:30 Reassessment of the hydraulic characteristics of the ITER Central Solenoid Model Coil conductors after 15 years of test campaigns - Laura Savoldi (Politecnico di Torino)

10:45 Performance, Quench, and Protection of a Conduction Cooled, MgB2, MRI Segment Coil - Danlu Zhang (The Ohio State University)

11:00 Cable-in-Conduit – reliable, cost-effective dipole technology for 1 Tesla to 20 Tesla - Joshua Kellams (Texas A&M University)

11:15 Strain control of composite superconductors to prevent degradation of superconducting magnets during a quench - Tengming Shen (Lawrence Berkeley National Lab)
09:30 - 11:30
Room: Hall of Ideas - FI
Contributions

09:30 Large capacity two-stage pulse tube cryocoolers - Chao Wang (Cryomech)

09:45 Cascading pulse tubes on a large diaphragm pressure wave generator to increase liquefaction potential. - Alan Caughley (Callaghan Innovation)

10:00 System integration for a turn-key gas-separation to liquid in a mobile solution. - Jonas Meier (Fabrum Solutions)

10:15 Innovations in High Efficiency Commercial Pulse Tube Cooler - Haibing Li (Lihan Cryogenics Co. Ltd)

11:00 A multi-stage heat-driven traveling-wave thermoacoustic refrigeration system operating at liquefied natural gas temperature - Kai Luo (Institute of Refrigeration and Cryogenics, Zhejiang University, China)

11:15 Theoretical Analysis and Experimental Investigation on a Traveling-Wave Thermoacoustically-Driven Cryocooler for Natural Gas Liquefaction - Jingyuan Xu (Technical Institute of Physics and Chemistry, CAS)
09:30 - 11:15
Room: Madison Ballroom AD
Contributions

10:00 MIRI Cooler Subsystem Test Facility Design and Performance - Bradley Moore (JPL/Caltech)

10:15 Ball Aerospace Scalable Configurable Cryocooler Electronics (SCCE) - Eric Marquardt (Ball Aerospace)

10:30 Characterization Testing of Lockheed Martin High-Power Micro Pulse Tube Cryocooler - Ian McKinley (Jet Propulsion Laboratory)

10:45 Advances in single- and multi-stage Stirling-type pulse tube cryocoolers for space applications in NLIP/SITP/CAS - Haizheng Dang (National Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sci)

11:00 Status of Pulse Tube Cryocooler Development at SITP, CAS - ankuo zhang (Shanghai Institute of Technical Physics, Chinese Academy of Sciences)
09:30 - 11:00
Room: Lecture Hall
Contributions

09:30 [Invited] Cryogenic Sensor and Cryorefrigerator Development in the Quantum Sensors Group at NIST - Joel Ullom (NIST)

10:00 [Invited] Prototyping Extensible Quantum Computing Architectures - Matteo Mariantoni (University of Waterloo) Thomas G. McConkey (University of Waterloo)

10:30 [Invited] Ultra-Low-Power Silicon Germanium Cryogenic Low Noise Amplifiers - Joseph Bardin (University of Massachusetts Amherst)
09:30 - 11:30
Room: Hall of Ideas - EH
Contributions

09:30 Development of (Ba,K)Fe2As2/stainless steel/(Ag-Sn) double sheath tapes - Hiroaki Kumakura (National Institute for Materials Science)

09:45 [Invited] Progress in the development of high performance pnictide wires - Xianping Zhang (Institute of Electrical Engineering, Chinese Academy of Science)

10:15 Enhanced transport performance of superconducting Ba1-xKxFe2As2 wires induced by biaxially cold high pressure densification (BCPD) - Xiong Li (The Ohio State University)

10:30 [Invited] Present Status of PIT Round Wires of 122-type Iron-based Superconductors - Tsuyoshi Tamegai (The University of Tokyo)

11:00 High-field transport properties of a P-doped BaFe2As2 film on technical substrate - Kazumasa Iida (Nagoya Universty)

11:15 High-Jc FeSe0.5Te0.5 thin films fabricated on less-well-textured flexible coated conductor templates - Zhongtang Xu (Institute of Electrical Engineering, Chinese Academy of Sciences)