Focus on:  Hide Contributions
Back to Conference View
Login
EUCAS 2017

from Sunday 17 September 2017 (08:00) to Thursday 21 September 2017 (22:00)
Geneva (CICG)

        : Sessions
    /     : Talks
        : Breaks
17 Sept 2017
18 Sept 2017
19 Sept 2017
20 Sept 2017
21 Sept 2017
AM
08:30
Short Courses (until 17:00)
08:30 Design of Superconducting magnets for particle accelerators and detectors  
08:30 High Temperature Superconductors: the path from the materials to the technical conductors  
08:30 RF Superconducting Cavities  
08:30 Superconducting electronics - from Josephson effects to quantum computing  
08:30 Superconducting Power Devices  
08:00
Welcome Address and Awards (until 08:30)
08:30
ESAS Award & Talk (until 08:50)
08:30 ESAS Award and Talk - Ronny Stolz (Leibniz)  
09:00
1P1 - Plenary 1 (until 09:50)
09:00 1P1-01 - Charge Density Waves in underdoped High-Tc materials - Ted Forgan (University of Birmingham)  
09:50 --- Coffee Break ---
10:15
1E01 (until 12:15) (CICG - Room 3+4)
10:15 1EO1-01 Transport and noise properties of YBCO nanowire based nanoSQUIDs - Thilo Bauch (Chalmers University of Technology)  
10:45 1EO1-02 3D nanoSQUID with an energy sensitivity of 1 h at 4.2 K - Carmine Granata (National Research Council, Institute of Applied Sciences and Intelligent Systems)  
11:00 1EO1-03 SQUIDs with sub-micron Josephson junctions for ultra-low-field magnetic resonance imaging - Juho Luomahaara (VTT Technical Research Centre of Finland)  
11:15 1EO1-04 Large High-Temperature Superconducting 2D SQIF arrays - Shane T Keenan (CSIRO)  
11:30 1EO1-05 Scanning SQUID Microscopy for Sensing Vector Magnetic Field - The Dang Vu (Department of Physics and electronics, Osaka Prefecture University)  
11:45 1EO1-06 Flip-chip high-Tc DC SQUID magnetometer with a ferromagnetic flux antenna - Michael Faley (Peter Grünberg Institute,)  
12:00 1EO1-07 Phase sensitive imaging of the currents in planar superconductive resonator - Alexandre Karpov (National University of Science and Technology (MISIS))  
10:15
1LO1 - FCL / SMEs (until 12:15)
10:15 1LO1-01 Siemens’ first MV SFCL installed in a public grid – aspects from design to operation and operational experience - Tabea Arndt (Siemens AG)  
10:45 1LO1-02 Resistive superconducting fault current limiter for 220 kV Moscow grid - Moyzykh Mikhail (S-Innovations)  
11:00 1LO1-03 SmartCoil –Shielded Core Reactor for Current Limitation on the Distribution Level - Kudymow Andrej (Karlsruhe Institute of Technology)  
11:15 1LO1-05 The DRYSMES4GRID project: development of a cryogen free cooled SMES demonstrator based on MgB2 - Antonio Morandi (University of Bologna - DEI)  
11:30 1LO1-06 Development of round flexible HTS CORC® wires for fault current limiting applications - Jeremy Weiss (Advanced Conductor Technologies)  
11:45 1LO1-07 A new EC project: FASTGRID - Pascal Tixador (Grenoble-INP)  
12:00 1LO1-  
10:15
1MO1 (until 12:15)
10:15 1MO1-01 Universal Lower Limit on Vortex Creep in Superconductors - Serena Eley (Serena Eley)  
10:45 1MO1-02 Self-field critical currents of practical superconductors - Evegny Talantsev (Robinson Research Institure, Victoria University of Wellington)  
11:00 1MO1-03 Micro-straining tuning for strong and isotropic artificial pinning centers in YBCO films - Judy Wu (University of Kansas)  
11:15 1MO1-04 Progress towards YBa2Cu3O7-δ nanocomposite thin films using chemical solution deposition and preformed nanocrystals - Katrien De Keukeleere (Ghent University)  
11:30 1MO1-05 High-field Jc properties of MOD-(Y,Gd)Ba2Cu3Oy coated conductors with BaHfO3 nanoparticles - Tatsunori Okada (High Field Laboratory for Superconducting Materials, IMR, Tohoku University)  
11:45 1MO1-06 The challenging pinning landscape of YBa2Cu3O7 thin films - Bernart Mundet (Institut de Ciència de Materials de Barcelona)  
12:00 1MO1-07 High field superconducting characteristics at low temperature of SmBa2Cu3Ox coated conductor with artificial pinning center - Yutaka Yoshida (Nagoya university)  
08:00
2P1 - Plenary 2 (until 08:50)
08:00 2P1-01 HTS versus LTS: physics, technology, and application prospects - Michael Eisterer  
08:50
2EO1 - Invited Orals (until 09:50)
08:50 2EO1-01 Execution of Stored Programs in a Single-Flux-Quantum Microprocessor with Embedded Memories at 50 GHz - AKIRA FUJIMAKI (Nagoya University)  
09:20 2EO1-02 Topological superconductivity revealed by nanoscale Josephson junctions - Floriana Lombardi (Chalmers)  
08:50
2LO1 - Invited Orals (until 09:50)
08:50 2LO1-01 Manufacturing of LTS and HTS magnets for heavy-ion rotating gantry - Shigeki Takayama (Toshiba Corporation)  
09:20 2LO1-02 Superconducting Cyclotrons for Hadron Radiotherapy - Dr Joseph Minervini (Massachusetts Institute of Technology)  
08:50
2MO1 - Invited Orals (until 09:50)
08:50 2MO1-01 Industrial production of Nb3Sn conductors for particle accelerator magnets - Lance Cooley (Fermilab)  
09:20 2MO1-02 Status of Industrial Coated Conductor Production and Properties - Bernhard Holzapfel  
09:50 --- Coffee Break ---
10:15
2EO2 - Novel Devices and concepts (until 12:15)
10:15 2EO2-01 Controllable transfer of spin-polarized Cooper pairs into a half-metal manganite - Jason Robinson (Department of Materials Science)  
10:45 2EO2-02 Road to scalable superconducting phase memory devices - Sergey Bakurskiy (NUST MISIS)  
11:00 2EO2-03 Superconducting spintronics with high-temperature superconductors - Angelo Di Bernardo (University of Cambridge)  
11:15 2EO2-04 Non-monotonic temperature dependence of magnetoresistance in Nb-Ni-Nb planar junctions below superconducting transition - Ekta Bhatia (National Institute of Science Education and Research)  
11:30 2EO2-05 Signatures of unconventional superconductivity in oxide based 2DEG - Daniela Stornaiuolo (Department of Physics, University of Naples "Federico II" and CNR-SPIN Napoli)  
11:45 2EO2-06 Phase dynamics and macroscopic quantum phenomena in hybrid Josephson junctions - Davide Massarotti (Dipartimento di Fisica, Università degli Studi di Napoli Federico II - CNR-SPIN UOS Napoli)  
12:00 2EO2-07 Quantum Voltage Standard Developments at NIST - Sam Benz (NIST)  
10:15
2LO2 - Rotating Machines and other Large Size Applications (until 12:15)
10:15 2LO2-01 Status of the Ecoswing project - Markus Bauer (THEVA Dünnschichttechnik GmbH)  
10:45 2LO2-02 Space research experiments with bulk superconductors - Frank N. Werfel (Adelwitz Technologiezentrum GmbH (ATZ))  
11:00 2LO2-03 Superconducting Medium Speed Synchronous Electrical Generator for 2MW Class Wind Mills - Xavier Granados (ICMAB-CSIC)  
11:15 2LO2-04 Development of a 8 kW HTS Axial Flux Machine for Electrical Aircraft Propulsion - min zhang  
11:30 2LO2-05 Loss Analysis of a 3 MW HTS Ship Propulsion Motor - Toshiyuki Yanamoto (Kawasaki Heavy Industories, Ltd.)  
11:45 2LO2-06 Comparison of Levelized Cost of Energy of superconducting direct drive generators for a 10 MW offshore wind turbine - Asger Bech Abrahamsen (DTU Wind Energy, Technical University of Denmark)  
12:00 2LO2-07 A novel magnetic bearing using 2G double crossed loops - Flávio Martins (Universidade Federal do Rio de Janeiro)  
10:15
2MO2 - Strain, Irradiation, Imaging (until 12:15)
10:15 2MO2-01 Characterisation of accelerator magnet coils and coil constituents using neutron and synchrotron sources - Christian Scheuerlein (CERN)  
10:30 2MO2-02 Spatial Distributions of Flexural Strength in TSMG and TSIG YBCO Bulk Superconductors - Kai Yuan (Danny) Huang (University of Cambridge)  
10:45 2MO2-03 Influence of artificial pinning centers on the radiation resistance of coated conductors - David Fischer (Technische Universität Wien)  
11:00 2MO2-04 Effects of swift-particle irradiations on the critical current density in FeSe - Tsuyoshi Tamegai (The University of Tokyo)  
11:15 2MO2-05 The number of displacement per atom (dpa), a universal parameter describing the decrease of Tc in superconducting accelerator magnets - Rene Louis Jacques Flukiger (Universite de Geneve)  
11:30 2MO2-06 Tailored design of vortex behaviour and its visualisation with high-speed magneto-optical video - Alexey V. Pan (Institute for Superconducting and Electronic Materials, University of Wollongong)  
11:45 2MO2-07 Magneto-Optical Imaging Of Ac Suscetibility In Superconducting Thin Films - Wilson Ortiz (Departamento de Fisica, Universidade Federal de Sao Carlos)  
12:00 2MO2-08 Observations of deformation effects on A15 production in Nb3Sn Powder In Tube wires - Chris Segal (National High Magnetic Field Laboratory)  
08:00
3P1 - Plenary 3 (until 08:50)
08:00 3P1-01 The NHMFL 32 T superconducting magnet - Hubertus Weijers (NHMFL/FSU)  
08:50
3EO1 - Invited Orals (until 09:50)
08:50 3EO1-01 Nanowire-Based Single-Photon Detectors and Imagers - Kark K Berggren (MIT)  
09:20 3EO1-02 Scanning SQUID-on-tip nanomagnetometry and nanothermometry of quantum systems - Eli Zeldov (Weizmann Institute of Science)  
08:50
3LO1 - Invited Orals (until 09:50)
08:50 3LO1-01 Achievements, Progress and Issues of No-Insulation HTS Coils - Seungyong Hahn (Seoul National University)  
09:20 3LO1-02 Prospect of Liquid Hydrogen Cooled Superconducting Power Apparatus and Carbon Free Energy System - Yasuyuki Shirai (Kyoto University)  
08:50
3MO1 - Invited Orals (until 09:50)
08:50 3MO1-01 New superconductors: waiting for room temperature (?) - Gianni Profeta (Department of Physical and Chemical Sciences and SPIN-CNR)  
09:20 3MO1-02 A new chance for Bi-2212 wires to boost their applications in high magnetic fields - andrea malagoli (CNR-SPIN)  
09:50 --- Coffee Break ---
10:15
3LO2 - HTS Magnets and Cables (until 12:15)
10:15 3LO2-01 Review of HTS cables for large magnets - Davide Uglietti  
10:45 3LO2-02 Generation of 25 T: field quality and field profile measurements of a 4 T REBCO insert coil for a 21 T LTS magnet - Christian Barth (University of Geneva, Department of Quantum Matter Physics)  
11:00 3LO2-03 First fully European CORC cables - Michal Vojenciak (Institute of Electrical Engineering SAS)  
11:15 3LO2-04 Current progress of High-temperature superconducting CORC® magnet cable and wire development - Jeremy Weiss (University of Colorado)  
11:30 3LO2-05 Transposed high current cables made with strong, rectangular Bi2212 superconductor wire - Alexander Otto (Solid Material Solutions, LLC)  
11:45 3LO2-06 An HTS Magnet Demonstrator for Space Experiment - Gijs De Rijk (CERN)  
12:00 3LO2-07 Results of the Development of a High Current HTS Cable for Accelerator Magnet Applications - Luca Bottura (CERN)  
10:15
3LO3 - Quench Protection (until 12:15)
10:15 3LO3-01 Overview of the Quench Heater Performance for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC. - Susana Izquierdo Bermudez (CERN)  
10:45 3LO3-02 Stability, quench, and current sharing in Roebel and CORC cables for HEP magnets - Mike Sumption (The Ohio State University)  
11:00 3LO3-03 Quench detection for HTS magnets using acoustic thermometry - Maxim Marchevsky (Lawrence Berkeley National Lab. (US))  
11:15 3LO3-04 A novel quench detection method using radio frequency wave technology - Hu Yanlan (Institute of plasma physics chinese academy od sciences)  
11:30 3LO3-05 Quench detection via Rayleigh backscattering interrogated optical fibers - Federico Scurti (NCSU)  
11:45 3LO3-07 Normal zone propagation velocity and surface temperature mapping in HTS coated conductors during quench - Roland Gyuráki (Karlsruhe Institute of Technology)  
12:00 3LO3-08 AC losses and inter-strand resistance in impregnated ReBCO Roebel cables - Peng Gao (University of Twente)  
10:15
3MO2 - Magnetisation and Trapped Field (until 12:15)
10:15 3MO2-01 Magnetic Flux Invasion and Field-Capturing in Pulsed-Field Magnetization for Layered MgB2 Bulk Magnets - Tetsuo Oka (Niigata University)  
10:30 3MO2-02 The successful incorporation of Ag into YBa2Cu3O7 bulk superconductors - Jasmin Congreve (University of Cambridge)  
10:45 3MO2-03 Towards optimisation of multi-pulse, multi-temperature pulsed field magnetisation of bulk high-temperature superconductors - Mark Ainslie (University of Cambridge)  
11:00 3MO2-04 Progress in trapped field magnets made from stacks of coated conductor tape - Anup Patel (Univeristy of Cambridge, Department of Materials Science and Metallurgy)  
11:15 3MO2-05 Magnetic Microscopy for Magnetic Relaxation in RE-123 Coated Conductor with DC Transport Current and External Magnetic Field - Kohei Hisajima (Kyushu University)  
11:30 3MO2-06 AC susceptibility analysis of coated conductor tapes - Fedor Gömöry (Slovak Academy of Sciences)  
11:45 3MO2-07 AC Losses of Roebel Cables with Striated 2G YBCO Strands - Yifeng Yang  
12:00 3MO2-08 A finite element analysis of flux pumping in high Tc superconductors - Archie Campbell (University of Cambridge)  
08:00
4LO1 - SRF (until 09:50)
08:00 4LO1-01 Industrial fabrication and surface treatment of superconducting RF cavities: challenge and main lesson - Paolo Michelato (INFN MIlano)  
08:30 4LO1-02 Path forward for economic and high performance SRF accelerator structures - Ganapati Myneni (Jefferson Lab)  
08:45 4LO1-03 Superconducting RF and Magnet Technologis for International Linear Collider - Prof. Akira Yamamoto (KEK and CERN)  
09:00 4LO1-04 Superconducting RF at CERN: operation, projects, and R&D - Frank Gerigk (CERN)  
09:15 4LO1-05 Alternative Coating Techniques and Materials for SRF Cavities - Guillaume Jonathan Rosaz (CERN)  
09:30 4LO1-06 Dislocation substructures, and low temperature N doping impact on flux penetration and trapping in SRF Nb - Peter Lee (Florida State University)  
08:00
4MO1 - Bi-based and A15 Materials (until 09:50)
08:00 4MO1-01 Key parameters for strong a-axis grain growth in narrow filament cavities of Bi-2212 round wires - Fumitake Kametani (NHMFL Tallahassee US)  
08:15 4MO1-02 High-Field Thermal Conductivity of OP Bi-2212 wires - Marco Bonura  
08:30 4MO1-03 Improved critical current density in recent Bi-2212 round wires - Jianyi Jiang (Florida State University)  
08:45 4MO1-04 Effects of element addition into Cu matrix for IT-processed Nb3Sn wires - Nobuya Banno (National Institute for Materials Science)  
09:00 4MO1-05 Refining the Grain Size in Nb3Sn conductor in Hyper Tech - Matt Rindfleisch (Hyper Tech Research)  
09:15 4MO1-06 New Nb3Al superconducting wires with Ta-Ni interfilament matrix - Akihiro Kikuchi (National Institute for Materials Science)  
09:30 4MO1-07 New understanding of Nb3Sn doping for strand performance improvement - Chiara Tarantini (ASC-NHMFL, Florida State University)  
08:00
4MO2 - MgB2 (until 09:50)
08:00 4MO2-01 Improvement in microstructure and critical current density of in situ PIT MgB2 wires by cold working with a swaging machine - Hiroaki Kumakura (National Institute for Materials Science)  
08:30 4MO2-02 Copper stabilized dense MgB2 wires fabricated by two types of methods: mechanical milling and internal magnesium diffusion - Motomune Kodama (Hitachi, Ltd. Research & Development Group)  
08:45 4MO2-03 Electro-mechanical studies of MgB2 wires and cables prepared by different processes. - Pavol Kovac (Institute of Electrical Engineering of SAS)  
09:00 4MO2-04 Rapid synthesis of MgB2 bulks by inductive heating - Davide Matera  
09:15 4MO2-05 High Trapped Fields in C-doped Mg(B1-xCx)2 Bulk Superconductors Fabricated by Infiltration and Growth - Ashutosh Bhagurkar (Brunel University)  
09:30 4MO2-06 MgB2 round wires for the high-power superconducting cable demonstrator in the Best Paths project - Matteo Tropeano (Columbus Superconductors, SpA)  
09:50 --- Coffee Break ---
10:15
Poster : 4EP1 - SQUID Applications and detectors (until 12:15)
10:15 4EP1-01 Scaling Properties of YBCO SQAs - Susan Berggren (Space and Naval Warfare Systems Center Pacific)  
10:16 4EP1-02 Towards practical HfTi-nanoSQUID sensors - Sylke Bechstein (Physikalisch-Technische Bundesanstalt)  
10:17 4EP1-03 X-ray absorption fine structure spectrometer with superconducting-tunnel-junction array detector for light element impurities in heat resistant steels - Masataka Ohkubo (AIST)  
10:18 4EP1-04 Hot electron bolometer mixer for operation in the mid-infrared region - Akira Kawakami (NICT)  
10:19 4EP1-05 Production of HTS-SQUID magnetometer with ramp-edge junctions exhibiting lowered noise in ac biasing mode - Seiji Adachi (SUSTERA)  
10:20 4EP1-07 Fabrication and Characterization of large High-Tc Superconducting Quantum Interference Filters - Emma Mitchell (CSIRO Manufacturing)  
10:21 4EP1-09 Design Map for bi-SQUIDs - Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)  
10:22 4EP1-10 Static and Radiofrequency magnetic response of High TC Superconducting Quantum Interference Filters made by ion irradiation - Eliana Recoba Pawlowski (Thales Research and Technology)  
10:23 4EP1-11 A practical SQUID system with two-stage readout scheme - Guofeng Zhang (State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050, China)  
10:24 4EP1-12 Practical-SQUID current sensors with nanometer-sized Nb-AlOx-Nb Josephson junctions - Jan-Hendrik Storm (Physikalisch-Technische Bundesanstalt)  
10:25 4EP1-13 Parameters characterization of all-NbN DC-SQUID magnetometer - Liu Quansheng (SIMIT)  
10:26 4EP1-14 Development of Microwave Kinetic Inductance Detectors with YBCO Spiral Resonators - Seiichiro Ariyoshi (Toyohashi University of Technology)  
10:27 4EP1-15 Superconducting Imager by means of a Delay Line Current-Biased Kinetic Inductance Detector - Takekazu Ishida (Osaka Prefecture University)  
10:28 4EP1-16 Low-Noise Series SQUID Array Amplifiers for - Robin Cantor (STAR Cryoelectronics)  
10:29 4EP1-17 Fe(Se,Te) Josephson junctions, dc-SQUIDs and nanostrips - Carlo Ferdeghini (SPIN-CNR, Istituto Superconduttori)  
10:30 4EP1-18 Investigation of three-dimensional digital circuits with nanometer Josephson junctions made by Focused Ion Beam - Pascal Febvre (Université Savoie Mont Blanc)  
10:31 4EP1-19 Investigation of the Harmonic Mixer and Low Frequency Converter Regimes in a Superconducting Tunnel Junction - Konstantin Kalashnikov (Moscow Institute of Physics and Technology)  
10:32 4EP1-20 Development of the devices for non-destructive testing based on SQUID systems. - Konstantin Kalashnikov (Moscow Institute of Physics and Technology)  
10:15
Poster : 4EP2 - Josephson Junctions and devices (until 12:15)
10:15 4EP2-04 Metrology for Single Flux Quantum Electronics - Adam Sirois (NIST-Boulder)  
10:16 4EP2-07 Fabrication and evaluation of hetero-epitaxial multilayer for Nb/AlN/Nb junctions - Yasuhiro Odashima (Yamagata University)  
10:17 4EP2-08 Circuit Modification and Parameters Optimization for a High Frequency RSFQ T1FF - Tahereh Jabbari (Electrical Engineering Department, Sharif University of Technology)  
10:18 4EP2-09 Josephson junctions arrays of alternating S and N film parts - Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)  
10:19 4EP2-10 Resonances and phase locking in Josephson high-Q circuits - Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)  
10:20 4EP2-11 High-Tc Josephson junctions as quasiclassical THz detectors - Yuriy Divin (Kotelnikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)  
10:21 4EP2-12 Focused He+-Ion Beam Irradiated High Tc Josephson Junctions - Francois Couedo (Physics and Materials Laboratory (LPEM), ESPCI-PSL-CNRS-UPMC)  
10:22 4EP2-13 Restoration of Josephson Current by Applying Vertical Magnetic Field - Atsushi Suzuki (Kanagawa University)  
10:23 4EP2-14 Terahertz emission from electrode structure optimized Bi-2212 intrinsic Josephson junctions - Teppei Uchida (Yamagata University)  
10:24 4EP2-15 Josephson standards for a new AC quantum voltage infrastructure (in the scope of the ACQ-PRO EMPIR project) - Paolo Durandetto (INRiM - Istituto Nazionale di Ricerca Metrologica)  
10:25 4EP2-16 Modulation characteristics of a Josephson current through Nb tunnel junction by a parallel magnetic field and a perpendicular magnetic field - Norimichi Watanabe (Kanagawa University)  
10:26 4EP2-17 Measurement of Specific Capacitance for Nb/Al-AlOx/Nb Josephson Tunnel Junctions - Xiong Wei (Shanghai institute of microsystem and information technology)  
10:27 4EP2-18 Measurement of thickness dependence of superconductivity in epitaxial NbN films - Zhang Qiyu (Shanghai Institute of Microsystem and Information Technology)  
10:28 4EP2-21 Quantum memcapacitance with transmon-resonator system - Denys Karpov (B. Verkin ILTPE of NASU)  
10:29 4EP2-22 Josephson quantum DAC based on binary divided 1-V SNIS array - Bruno Trinchera (INRIM - Istituto Nazionale di Ricerca Metrologica)  
10:30 4EP2-23 Critical current scattering in series arrays of HTS SQUIDs based on ion-damaged barrier Josephson junctions - Denis Crété (Unité Mixte de Physique CNRS/THALES)  
10:31 4EP2-24 Megahertz Waveform Synthesis with the Josephson Arbitrary Waveform Synthesizer - Justus Brevik (NIST Boulder)  
10:15
Poster : 4LP1 - Accelerator magnets and cables (until 12:15)
10:15 4LP1-01 An High Field Insert Accelerator Class Dipole Magnet Constructed with Roebel Multi-tape HTS Cable - Glyn Kirby (CERN)  
10:16 4LP1-02 Quench propagation in Nb3Sn cos-theta 11 T dipole model magnets in high stress areas - Franco Julio Mangiarotti (CERN)  
10:17 4LP1-03 Simulation of a Quench Event in the Reconfigured LHC Main Dipole Circuit Including the 11 T Magnets for the High-Luminosity Upgrade - Alejandro Fernandez Navarro (CERN)  
10:18 4LP1-04 Finite Element Analysis of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magnet during operation - Christian Löffler (CERN)  
10:19 4LP1-05 Advanced Nb3Sn Conductors Tested in a Racetrack Coil Configuration for the 11T Dipole Project - Hugo Bajas (CERN)  
10:20 4LP1-06 Design of a 4 Tm forward superconducting dipole for the FCC-hh detector magnet system - Erwin Bielert (University of Illinois at Urbana-Champaign (UIUC) and CERN)  
10:21 4LP1-08 Measuring the Magnetic Center Behavior and Field of FRIB Superconducting Magnets - Ge Zhengfu (XI’AN superconducting magnet technology co.，ltd)  
10:22 4LP1-09 Process gas characterisation and control during Nb3Sn coil reaction heat treatment - Christian Scheuerlein (CERN)  
10:23 4LP1-10 Design and Testing of a Demonstration HTS dipole Magnet at 77 K - Timing Qu (Tsinghua University)  
10:24 4LP1-11 Trans National Access to CERN Superconducting Magnet Test Facility within the framework of EUCARD2 - Marta Bajko (CERN)  
10:25 4LP1-13 Nitrogen Cryogenic System for the NICA Accelerator Complex at JINR - Iuliia Mitrofanova (JINR)  
10:26 4LP1-14 Compact common-coil design for a future collider - Emmanuele Ravaioli (LBNL)  
10:27 4LP1-15 Prototype of the short-period superconducting undulator with neutral poles: test results - Nikolay Mezentsev (Budker Institute of Nuclear Physics)  
10:28 4LP1-16 Construction and cold test of the superferric octupole for the LHC Luminosity upgrade - Marco Statera (Istituto Nazionale di Fisica Nucleare)  
10:29 4LP1-17 Assembly and test of the Nb3Sn dipole magnet FRESCA2 - Paolo Ferracin (CERN)  
10:15
Poster : 4LP2 - Ancillaries and Technology (until 12:15)
10:15 4LP2-01 Theoretical Expressions of Output Errors in Two Types of Superconducting Level Sensors - Kazuhiro Kajikawa (Kyushu University)  
10:16 4LP2-02 Strain measurements with Fiber Bragg Grating sensors in the short models of the HiLumi LHC Low-Beta Quadrupole Magnet MQXF - Antonella Chiuchiolo (CERN)  
10:17 4LP2-03 A three-dimensional measurement system for HTS magnetic levitation bearings - Li Wanjie (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:18 4LP2-04 Determination of the N exponent of 2G HTS tapes from V-I curves using a thermally stabilized fast pulsed system - Rubens de Andrade Junior (Universidade Federal do Rio de Janeiro)  
10:19 4LP2-05 Instrumentation for laboratorial high current tests of 3-phase Cold Dielectric HTS Power Cable - Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))  
10:20 4LP2-06 Novel rotating coil setup for definition of the magnetic field quality for XFEL magnets - Yury Klimchenko (JSC «D.V.Efremov Institute of Electrophysical Apparatus» NIIEFA)  
10:21 4LP2-07 A Method for Monitoring Unbalanced Three-Phase HTS Cable Systems via Time-Frequency Domain Reflectometry - Geon Seok Lee (Yonsei University)  
10:22 4LP2-08 Variable Temperature Insert for Measurement of Critical Current in HT Superconductors - David Richter (CERN)  
10:23 4LP2-09 Conduction Cooled HTS Current Leads for the SIS100 Corrector Magnets - Alexander Bleile (GSI)  
10:24 4LP2-10 Design of YBCO HTS current leads for high field medical cyclotron application - Kaizhong Ding (institute of plasma physics, Chinese Academy of Sciences)  
10:25 4LP2-11 Experimental Test of a Multistage Cooled Current Lead for Superconducting High Current DC Applications, designed for an Operating Current of 20 kA - Mathias Noe (Chair for Energy Systems and Energy Management at University of Kaiserslautern)  
10:26 4LP2-12 Design, Testing and Commissioning of 25.4 kA HTS Current Leads - Michael Boersch (WEKA AG)  
10:27 4LP2-13 Cylindrical geometry flux-pump dynamos - Zhenan Jiang (Victoria University of Wellington)  
10:28 4LP2-14 Cryogenic Electrical Insulation Characteristics of Solid Insulator for the DC HTS Cable - Haejong Kim (KERI)  
10:29 4LP2-15 Discharge mechanisms in liquid nitrogen – breakdown field strength of gaseous nitrogen - Nicholas Hill (TU Braunschweig)  
10:30 4LP2-16 Keeping Cool Under Pressure: Dielectric Strength of Solid Insulation in Boiling Liquid Nitrogen - Zhiyang Jin (University of Canterbury)  
10:31 4LP2-17 The Trap Distribution And Dielectric Failure Strength Of Polyamide Film Under DC And Repetitive Pulse Voltage Combination - Mingyang Wang (Tianjin University)  
10:32 4LP2-18 Enhanced Dielectric Breakdown Strength of Cryogenic Gas Mixtures to be Used in Superconducting Power Devices - Sastry Pamidi (Center for Advanced Power Systems)  
10:33 4LP2-21 Breakdown and Partial Discharge Characteristics of Transformer Board and Insulating Paper Materials in Liquid Nitrogen - Christof Humpert (TH Köln (University of Applied Sciences))  
10:34 4LP2-22 Influence of Pressure on Breakdown Characteristics of Liquid Nitrogen in Non-uniform Electric Fields - Christof Humpert (TH Köln (University of Applied Sciences))  
10:35 4LP2-23 Arc Energy Evaluation In Liquid Nitrogen - Muhammad Junaid (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University)  
10:36 4LP2-24 Trap Distribution and Dielectric Breakdown of Irradiated Polyimide Film under Combined DC and Pulse Voltage in LN2 - Boxue Du (Tianjin University)  
10:37 4LP2-25 Tree Growth Characteristics of Epoxy Resin in LN2 under DC overlapped pulse voltage - Boxue Du (Tianjin University)  
10:38 4LP2-26 Partial Discharge and Breakdown Behavior of Syntactic Foams at 77 K - Stefan Seibel (RWTH Aachen University)  
10:39 4LP2-27 Analysis of a superconducting arc-induction type DC circuit breaker for the stability betterment in the direct current system - Sangyong Park (CHOSUN UNIVERSITY)  
10:40 4LP2-27 Cryogenic considerations for cooling superconducting links and application to the high luminosity upgrade of the Large Hadron Collider (LHC) - Daniel Berkowitz Zamora (CERN)  
10:15
Poster : 4LP3 - Design , manufacture & test of HTS systems (until 12:15)
10:15 4LP3-01 Minimum quench energy of a wind and react Bi-2212 coil in the temperature region 4.2 to 30 K immersed in either liquid helium, vapour or vacuum. - Edward Young (University of Southampton)  
10:16 4LP3-03 A System for the Generation of Reversible Magnetic Fields using Bulk Superconductors - Louis Dupont (Normandie Université, ENSICAEN, UNICAEN, CNRS, CRISMAT)  
10:17 4LP3-05 A novel Current Switch Controlled by Alternating Current Magnetic Field - Chao Li (University of Cambridge)  
10:18 4LP3-07 Conduction Cooled HTS Dipolar Magnet, Realization and Experimental Results - Dan Enache (National Institute for Research and Development in Electrical Engineering, ICPE-CA)  
10:19 4LP3-08 Fabrication and testing of Bi-2212 test coils for high field research magnets - Steven Ball (Oxford Instruments)  
10:20 4LP3-09 Design and Test of a double pancake coil wound by HTS Roebel cable - Peng Song (Tsinghua University)  
10:21 4LP3-10 Manufacture and Test of a 3 T Class Insert Coil with YBCO-Coated Conductor - Yi Shi (Institute of Plasma Physics Chinese Academy of Sciences)  
10:22 4LP3-11 Test of the First HTS Demonstrator Coil in the 11 T Background Field of the SULTAN Facility - Pierluigi Bruzzone (École Polytechnique Fédérale de Lausanne)  
10:23 4LP3-12 Validation of the electromagnetic design of a REBCO Superconducting Self-Supplied Electromagnetic Launcher through modelling and characterization - Arnaud Badel (University Grenoble Alpes–CNRS)  
10:15
Poster : 4LP4 - HTS Magnets and Cables (until 12:15)
10:15 4LP4-02 Experimental verifications of REBCO layer winding for persistent current operation - Yasuyuki Miyoshi (Japan Superconductor Technology, Inc.)  
10:16 4LP4-03 A highly reproducible superconducting joint between REBCO coated conductors made by a novel method - Tatsuoki Nagaishi (Sumitomo Electric)  
10:17 4LP4-04 Persistent superconducting Joint of REBCO tapes for HTS-MRI magnets - Akinobu Nakai (Furukawa Electric co.,ltd)  
10:18 4LP4-05 Measurement of the inter strand resistance in Roebel cable made of REBCO tapes - Jerome Fleiter (CERN)  
10:19 4LP4-06 Design Aspects of ReBCO CORC based Cable-In-Conduit Conductors - Tim Mulder (CERN and the University of Twente)  
10:20 4LP4-07 Superconducting High Current ReBCO CORC Bus bars for Large Detector Magnets - Tim Mulder (CERN and the University of Twente)  
10:21 4LP4-08 Advanced intermediate lengths of punch and coat processed HTS-Roebel cables in EuCARD2 - Anna Kario (Karlsruhe Institute of Technology)  
10:22 4LP4-09 Mechanical Characteristics of HTS CrossConductor Strands at Cryogenic Temperature - Klaus P. Weiss (Karlsruhe Institute of Technology)  
10:23 4LP4-10 Optimization of Winding Technique Based on Anisotropic Characteristics of Commercial REBCO Tapes - Jie Sheng (University of Bath)  
10:24 4LP4-11 Quench Characteristics of 2G YBCO Roebel Cable in a Pancake Coil - Yifeng Yang (University of Southampton)  
10:25 4LP4-12 Could superconducting magnets protect astronauts against space radiation? - Riccardo Musenich (INFN)  
10:15
Poster : 4LP5 - Other Large Size Application (until 12:15)
10:15 4LP5-03 Enhancement of Magnetic Field Sensing Accuracy by Using High-Temperature Superconductor Shields in Multilayer Planar Configuration - Jozef Kvitkovic (Florida State University, Center for Advanced Power Systems)  
10:16 4LP5-04 Manufacturing of coil formers by integral open-die forging and CNC ring rolling process - Manuel Spielhofer (Imbach & Cie AG)  
10:17 4LP5-05 Manufacture technology of the 9.4 T whole-body MRI superconducting coils - Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:18 4LP5-06 Development of a 9.4T Whole-body MRI Superconducting Magnet - Lankai Li (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:19 4LP5-07 Modelling and Testing of MgB2 Segmented Coils and Persistent joints for MgB2 Magnets - Mike Sumption (MSE, The OHio State University)  
10:20 4LP5-08 Stress induced magnetic field in-homogeneity in a 1.5T superconducting MRI magnet - Sankar Ram Thekkethil (Inter University Accelerator Centre)  
10:21 4LP5-09 Design of superconducting external interference Screening (EIS) coils for 1.5T MRI Magnet - Mukesh Kumar (Inter University Accelerator Centre)  
10:22 4LP5-10 Stress Analysis Of Cryogenic Suspension System Of Superconducting Mri Magnet Cryostat - Navneet Kumar Suman (Inter University Accelerator Centre)  
10:23 4LP5-11 Reduction methods of screening currents in REBCO multiple coils based on transport-current control - Yuichi Ozone (Waseda Univesity)  
10:24 4LP5-12 Quench Analysis Of A Whole-Body 1.5 T Superconducting MRI Magnet - Vijay Soni (Inter-University Accelerator Centre, New Delhi)  
10:25 4LP5-13 Numerical Analysis of Eddy Current Forces in the Thermal Shield of a Superconducting Magnet during Quench Events - Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:26 4LP5-16 Flux expulsion/pinning study in large grain SRF cavities with different impurity - Pashupati Dhakal (Jefferson Lab)  
10:27 4LP5-17 Performance Testing of Superconducting RF cavities at CERN in the post construction era of the LHC - Alick Macpherson (CERN)  
10:28 4LP5-18 Commissioning of IPN Orsay Vacuum furnace and first successful Heat treatment of SRF bulk Nb cavities - Mohammed Fouaidy (Institut de Physique Nucléaire)  
10:29 4LP5-19 Towards Optimization of Centrifugal Barrel Polishing Procedure for Treatment of Niobium Cavities - Alena Prudnikava (University of Hamburg/DESY)  
10:30 4LP5-20 Multi-physics Computation and Testing on Pre-Tuning of a Prototype of 1.5-GHz SRF Cavity - Chih-Hung Lo (National Synchrotron Radiation Research Center)  
10:31 4LP5-21 ReBCO coated conductors for the future circular hadron collider beam screen - Joffre Gutierrez (ICMAB - CSIC, Bellaterra, Spain)  
10:32 4LP5-22 Summary of low temperature nitrogen doping study on SRF cavities - Pashupati Dhakal (Jefferson Lab)  
10:33 4LP5-23 Characteristics analysis in Resonance coil applied to Superconducting Wireless Power Transfer - In-Sung Jeong (Chosun University)  
10:34 4LP5-24 ORE SEPARATOR MADE OF HIGH-TEMPERATURE SUPERCONDUCTORS YBCO - Jiangdi Fan (Chongqing Academy of Science and Technology)  
10:15
Poster : 4LP6 - Motors, Generators and other Rotating Machines (until 12:15)
10:15 4LP6-01 Testing of a full-scale HTS coil for a 2.5 MW wind turbine generator - Yudong Jiang (Dongfang Electric Corporation)  
10:16 4LP6-02 Design of a 15 kW fully superconducting synchronous generator - Timing Qu (Department of mechanical engineering, Tsinghua University)  
10:17 4LP6-03 Electromagnetic characteristic analysis and Optimization design of a novel HTS coreless induction motor with high speed - Bin Liu (School of Electrical Engineering, Beijing Jiaotong University)  
10:18 4LP6-04 System approach of usability of HTS electrical machines in future electric aircraft - Dmitry Dezhin (Moscow Aviation Institute)  
10:19 4LP6-06 A Large Scale Double-Stator Direct Driving HTS Wind Generator - Yi Cheng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)  
10:20 4LP6-07 HTS Inductor Motor with Combined Excitation - Roman Ilyasov (Moscow Aviation Institute)  
10:21 4LP6-08 Brushless non-steel HTS generator with combined excitation with trapped field plates on the rotor - Kirill A. Modestov (Moscow Aviation Institute (MAI))  
10:22 4LP6-09 A new type of superconducting motor with 2G HTS magnet rings - Min Zhang (University of Bath)  
10:23 4LP6-10 Electromagnetic Design of Superconducting Synchronous Motors for Electric Aircraft Propulsion - Yutaka Terao (University of Tokyo)  
10:24 4LP6-11 Electromechanical Design of a MW Class Wave Energy Converter with a Tubular HTS Linear Generator - Hailian Jing (Tokyo University of Marine Science and Technology)  
10:25 4LP6-12 Electrical analysis of 10 MW superconducting generator for aircraft applications - Kiwook Yun (Kyushu university)  
10:26 4LP6-13 Comparative study of 1MW PM and HTS synchronous generators for marine current turbine - Zhi Li (2-1-6, Etchujima, Koto-ku, Tokyo, JAPAN)  
10:27 4LP6-14 Design of a 20 MW Fully Superconducting Wind Turbine Generator to Minimize the Levelized Cost of Energy - Hoang Trung - Kien (GeePs, CentraleSupelec, University of Paris-Saclay)  
10:28 4LP6-15 Design and Performance of AC Superconducting Motors for Aerospace Electric Propulsion Systems - Charalampos D. Manolopoulos (School of Electrical and Electronic Engineering, The University of Manchester)  
10:29 4LP6-16 Design report of a 4KW superconducting HTS synchronous motor using HTS stacked tapes. - Mehdi Baghdadi (University of Greenwich)  
10:30 4LP6-17 Design study of 2MW fully superconducting motors - Shogo Fukuda (Kyushu University)  
10:31 4LP6-18 A superconducting machine for Aircraft application - Alexandre Colle (Universite de Lorraine - SAFRAN Tech)  
10:32 4LP6-19 Design Aspects and Testing of Superconducting Flywheels - Achim Hobl (Babcock Noell GmbH)  
10:33 4LP6-20 The Effect Research of Armature Position on Electromagnetic Propulsion Efficiency - Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:34 4LP6-22 Small-scale motor with AC HTS windings - Dmitry Dezhin (Moscow Aviation Institute)  
10:15
Poster : 4LP7 - FCL and the Grid (until 12:15)
10:15 4LP7-01 New technique for using SMES to limit fault currents in wind farm power systems - Mariam Elshiekh (University of Bath)  
10:16 4LP7-02 Characteristics of Reactor type superconducting DC current limiter for improved stability in the DC power system - Hyewon Choi (CHOSUN University)  
10:17 4LP7-03 Optimum Positioning Of HTS Based Resistive Fault Current Limiter - Prof. V. V. Rao (INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR)  
10:18 4LP7-04 Feasible Application Study of Different Types of Superconducting Fault Current Limiters in HVDC Grids - Ho-Yun Lee (Hanyang University)  
10:19 4LP7-06 Application of Flux-Coupling SFCL to Secure Fault Ride Through in Carbon-Free Stand-Alone Microgrid - Soo Hyoung Lee (Korea Electrotechnology Research Institute (KERI))  
10:20 4LP7-08 Power Differential Protection for Transmission Lines with Superconducting Fault Current Limiters - Diaa-Eldin A. Mansour (Kafrelsheikh University)  
10:21 4LP7-09 Hardware-in-the-loop Simulation on Fault Current Limiting Operation of RE-123 Coated Conductors under the Influence of Spatial Inhomogeneity - Kohei Higashikawa (Kyushu University)  
10:22 4LP7-10 DC Superconducting Fault Current Limiter Applications and Technical Indexes - Bin Li (School of Electrical & Information Engineering, Tianjin University, China)  
10:23 4LP7-11 Fault Current Limitation Coordination in Electric Power Grid with Superconducting Fault Current Limiters - Naoki Hayakawa (Nagoya University)  
10:24 4LP7-13 Study of SFCL for multi-terminal HVDC network - Ying Xin (Tianjin University)  
10:25 4LP7-15 PHILS of Transmission Line Protection System for the application of 154 kV SFCL in Korea - Seung Ryul Lee (KERI)  
10:26 4LP7-16 Research on the Application of Active Saturated Iron-Core Superconductive Fault Current Limiters in the VSC-HVDC System - Botong Li (School of Electrical and Information Engineer, Tianjin University)  
10:27 4LP7-17 Comparison between Different Models of Superconducting Fault Current Limiter with Application to an Electric Power Circuit - José Juan Pérez-Chávez (National Autonomous University of Mexico (UNAM))  
10:28 4LP7-18 Enhancement test of Critical Clearing Time of One-machine Infinite Bus Transmission System by Use of SFCL - Yasuyuki Shirai (Kyoto University)  
10:29 4LP7-19 Simulation study of the impact of superconducting fault current limiters to power grid - Fei Liang (Bath University)  
10:30 4LP7-20 Study of a Modified Flux-Coupling-Type Superconducting Fault Current Limiter for Protection of a DC Micro-Grid - Lei Chen (Wuhan University)  
10:31 4LP7-21 Characteristics of Superconducting DC interrupting system for operational reliability in the full scale converter wind turbines - Jun-Beom Kim (Chosun University)  
10:32 4LP7-22 Optimal Location of Superconducting Fault Current Limiters (SFCLs) for Fault Current Reduction in Korean AC Transmission Grids - Jin Hur (Sangmyung University)  
10:33 4LP7-23 Performance Enhancement of PMSG Wind Turbines with DC Microgrids Using Resistive-Type SFCL - Diaa-Eldin A. Mansour (Tanta University)  
10:34 4LP7-24 Analysis of Characteristics of Blocking Part for Optimized Inductor-Combined Superconducting DC Fault current limiter - Seonho Hwang (Chosun University)  
10:15
Poster : 4MP1 - Fe-Based (until 12:15)
10:15 4MP1-01 Pulsed Laser Deposition of Fe-based superconductor thin films with 355nm Nd:YAG laser - Sven Meyer (Karlsruhe Institute for Technology)  
10:16 4MP1-02 Investigation of dimensional dependent electronic properties in tetragonal iron chalcogenides - Ekaterina Kozlyakova (Lomonosov Moscow State University, Moscow, Russia)  
10:17 4MP1-04 Phase separation and microstructure in superconducting FeSe1-xTex materials - Andrea Masi (ENEA - Università Roma Tre)  
10:18 4MP1-05 Superconducting properties of (Ba,Na)Fe2As2 powder-in-tube wires and tapes - Shoko Itou (Department of Physics, Tokyo University of Science)  
10:19 4MP1-06 Production of silver added bulk FeSe material by ball-milling technique - Furutani Kouichi (Shibaura Institute of Technology)  
10:20 4MP1-07 Deposition and properties of Iron-Chalcogenide Fe(Se,Te) film - Antonella Mancini (ENEA)  
10:21 4MP1-09 On The Nature Of Unusual Microwave Response Of Thin FeSe1-xTex Film Near Critical Temperature - Guoqiang Li (O.Usikov IRE NAS of Ukraine)  
10:22 4MP1-10 Effect of post annealing on physical properties of BaFe2As2-based superconductors - Shigeyuki Ishida (AIST)  
10:23 4MP1-13 Structure and superconducting properties of oxypnictide thin films by molecular beam epitaxy - Sandra Kauffmann-Weiss (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))  
10:24 4MP1-15 Can topological transitions be exploited to engineer intrinsically quench-resistant wires? - Jorge Quintanilla (University of Kent)  
10:15
Poster : 4MP2 - MgB2 2/2 (until 12:15)
10:15 4MP2-01 Development status of MgB2 superconducting wires at KAT - Sehoon Jang (KAT)  
10:16 4MP2-02 Jc-B-T properties of MgB2 film on Cu tape - Takumu Iwanaka (Hitachi, Ltd)  
10:17 4MP2-03 Properties of Critical Current and Normal Zone Propagation of Multi-filamentary MgB2 Superconducting Wire Cooled by Liquid Hydrogen - Katsuyuki Fujita (Kyoto University)  
10:18 4MP2-04 A comparative study of new Ge-based additions to MgB2 - Dan Batalu (University POLITEHNICA of Bucharest)  
10:19 4MP2-05 Improvement of MgB2 superconducting properties acting on boron precursor by freeze-drying process - Gianmarco Bovone (SPIN Institute)  
10:20 4MP2-06 MgB2 superconductors produced by Encapsulated Nano Boron with two different magnesium sources - Serap Safran (ANKARA UNIVERSITY)  
10:21 4MP2-07 Enhanced properties of bulk MgB2 fabricated by an excess Mg method for applications - Ercan Ertekin (Ankara University)  
10:22 4MP2-08 Open-ends and closed-ends powder-in-tube tapes of MgB2 processed by spark plasma sintering - Gheorghe Virgil Aldica (National Institute of Materials Physics)  
10:23 4MP2-09 Persistent Current Operation of MgB2 Coils with Superconducting Joints of Reacted Wires - Yota Ichiki (Hitachi, Ltd.)  
10:24 4MP2-10 Properties of ex-situ MgB2 bulk samples prepared by uniaxial hot pressing - Wolfgang Häßler (Leibniz-Institut for Solid State and Materials Research (IFW) Dresden)  
10:25 4MP2-12 Structure and properties of MgB2 bulks, thin films and wires; effect of TiO2 and TiC additions - Tetiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)  
10:26 4MP2-13 Superconducting MgB2 processed by Spark Plasma Sintering for different pulsed current patterns - Petre Badica (National Institute of Materials Physics)  
10:15
Poster : 4MP3 - Basic Properties (until 12:15)
10:15 4MP3-01 Modelling the Critical Current of Surfaces and Grain Boundaries in Superconducting Films at High Magnetic Fields - Alexander Blair (Department of Physics)  
10:16 4MP3-02 Reversible Superconducting Diodes Using Rectified In-plane Vortices in Asymmetrically Multilayered BaHfO3-doped SmBa2Cu3Oy Films - Yuji Tsuchiya (Nagoya Univ.)  
10:17 4MP3-03 Extraction of the complex resistivity and pinning parameters from microwave surface impedance measurements of coated conductors - Nicola Pompeo (Dipartimento di Ingegneria, Università Roma Tre)  
10:18 4MP3-06 Superconducting Properties of Endohedral Gallide Cluster Based Mo8Ga41 superconductor - Prakriti Neha (Jawaharlal Nehru University)  
10:19 4MP3-07 On the origin of critical temperature enhancement in atomically-thin superconductors - Evgeny Talantsev (Robinson Research Institure, Victoria University of Wellington)  
10:20 4MP3-11 Presents the results of testing to achieve superconducting temperature - Sadeq Kazemifard (fard technology)  
10:15
Poster : 4MP4 - Measurement Techniques 2/2 (until 12:15)
10:15 4MP4-01 High current probe for gas flow Ic(B,T) measurements with ±0.01 K temperature precision: HTS current leads and active temperature compensation system - Christian Barth (University of Geneva, Department of Quantum Matter Physics)  
10:16 4MP4-03 Contactless verification of defects in 2G HTSC tapes with two-side superconducting layers - Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))  
10:17 4MP4-04 Finite Element Calculation of the Critical current and Magnetic "Levitation" Force between a Permanent Magnet and a ZFC YBaCuO Sample in Mixed State - Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))  
10:18 4MP4-05 Critical Current Density Transport Measurements on ITER Poloidal Field NbTi Strands from 3.5 to 8.0 K, in magnetic fields up to 8.0 T, using a Bespoke Probe - Mark Raine (Durham University Department of Physics)  
10:19 4MP4-06 Study of Precursor Solution Used For YBCO Films Chemical Solution Deposition: Solution Reactivity and Effects on Film Properties - Valentina Pinto (ENEA)  
10:20 4MP4-07 Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure - Jaakko Murtomäki (CERN)  
10:21 4MP4-08 International round robin test on critical current measurement of RE-Ba-Cu-O (RE=rare earth) superconducting tapes - Gen Nishijima (National Institute for Materials Science)  
10:22 4MP4-09 Simple Method to Fabricate Intrinsic Josephson Junction Device by Using Water-treatment Process - Hiromi Tanaka (National Institute of Technology, Yonago College)  
10:23 4MP4-10 Magnetic study of Nb micro-ring using attonewton-sensitivity dynamic cantilever magnetometer - Jae-Hyuk Choi (Korea Reserach Institute of Standards and Science)  
10:24 4MP4-11 The interfacial thermal surface resistivity between the Nb-Ti filaments and the matrix in High-field multifilamentary composite wires - Francis Ridgeon (Durham University)  
10:25 4MP4-12 Research on Non-destructive Examination of bracket welds ITER In-Vessel Coils (IVC) - Xiaochuan Liu (Institute of Plasma Physics Chinese Academy of Sciences)  
10:15
Poster : 4MP5 - Cuprate Thin Films 2/2 (until 12:15)
10:15 4MP5-01 Ex-situ liquid assisted growth of GdBa2Cu3O7-δ films on Hastelloy metal substrates - Oleksiy Troshyn (THEVA Dünnschichttechnik GmbH)  
10:16 4MP5-02 Optimization of novel melt-growth heat treatment of YbBa2Cu3O7-δ / Ag tapes - Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:17 4MP5-04 Surface Decoration as Prospective Artificial Pinning Strategy in Superconducting YBa2Cu3O7-x films - Laura Piperno (Engineering Department, Roma Tre University)  
10:18 4MP5-05 Low temperature fabrication of crack free GdBa2Cu4O8 films on oxide seed layer by molten hydroxide flux method - Keisuke Soeda (shimane university)  
10:19 4MP5-06 Nanodiamond: a New Tool for Artificial Pinning Center introduction in YBCO Films obtained through Chemical Solution Deposition - Valentina Pinto (ENEA)  
10:20 4MP5-07 Laser Modification of 2G-HTS Tapes Surface - Neslihan Turan (Gazi University, Ankara, Turkey)  
10:21 4MP5-08 Enhancement of superconducting properties for low-temperature LPE-REBa2Cu3Oy films via phase decomposition process in various RE elements - Shuhei Funaki (Shimane University)  
10:22 4MP5-09 Fabrication of YBCO Superconducting Film on {100} Textured Cu Tape via Conductive Buffer Layers - Toshiya Doi (Kyoto University)  
10:23 4MP5-10 Investigation on the Superconducting Properties of YGBCO/STO/YGBCO Tri-layer - Yanjie Yao (Key laboratory of Artificial Structures and Quantum Control, Shanghai Jiao Tong University)  
10:24 4MP5-11 Eutectic temperature determination of the BaO-CuO-O system in bulk and in films - Silvia Rasi (Universitat de Girona)  
10:25 4MP5-13 Flux pinning properties of Hf and Zr-doped Bi,Pb-2223 thin films with columnar defects - Akiyoshi Matsumoto (National Institute for Materials Science)  
10:26 4MP5-14 Microstructure and superconducting properties of impurity doped Bi,Pb-2223 thin films fabricated sputtering method - Akiyoshi Matsumoto (National Institute for Materials Science)  
10:27 4MP5-15 Control on phases formation in melt processed (Bi,Pb)-Sr-Ca-Cu-O samples due to Ag and PbO additions - Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))  
10:28 4MP5-16 Microstructure and Current Transport of Tl-1223 Thin Film Superconductors - Sigrid Holleis (Atominstitut, TU Wien)  
10:29 4MP5-17 Characterization of electrospun BSCCO nanowires with reduced preparation temperature - Michael Koblischka (Saarland University)  
10:30 4MP5-18 Assessment of Bi2Sr2CaCu2O8 Thin Films Grown by MOCVD for Power Electronics Applications - Kazuhiro Endo (Kanazawa Institute of Technology)  
10:31 4MP5-21 Growth of epitaxial YBCO double films derived from solution deposition - Lihua Jin (ShaanxiRare Metals Science and Industry Group Co., Ltd.)  
10:15
Poster : 4MP6 - Strain, Irradiation, Thermal Properties (until 12:15)
10:15 4MP6-01 Evaluation of actual delamination strength of REBCO coated conductors based on the Weibull analysis considering size effect - Shogo Muto (Fujikura Ltd.)  
10:16 4MP6-02 Thermal stability of commercially available coated conductors - Alan Preuß (Karlsruhe Insitute of Technology)  
10:17 4MP6-03 Unusual thermal properties of nonsuperconducting PrBCO ceramics at low temperatures - Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)  
10:18 4MP6-04 Thermal conductivity and dilatation of a Bi-2223/Ag (DI-BSCCO) superconducting wire laminated with Ni-alloy tapes - Yuichi Yamada (Iwate University)  
10:19 4MP6-05 Investigation of light-weight material of cryogenic pipe for aviation application - Masae Kanda (Chubu University)  
10:20 4MP6-06 Development of High-Strength BSCCO-2223 Tapes - Kozo Osamura (Research Institute for Applied Sciences)  
10:21 4MP6-07 Application of DIC to extract full field stress-strain data of superconducting coils under thermal contraction - Jorge Pelegrin (University of Southampton)  
10:22 4MP6-08 Strain effect on quench characteristics of YBCO Coated Conductor - Jiangtao Shi (Southwest Jiaotong University)  
10:23 4MP6-09 Structural modelling of REBCO CC tapes in TORT cables - Eva Michalcová (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)  
10:24 4MP6-10 Bending-peeling method to measure interface strength of YBCO tape - Peng Jin (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:25 4MP6-11 Delamination strength testing of commercial ReBCO tapes: climbing drum peel testing - Nicholas Long (Victoria University of Wellington)  
10:26 4MP6-12 Effect of mechanical loading on high temperature superconducting tapes during bending of round cables - Marcela Pekarčíková (Slovak University of Technology in Bratislava)  
10:27 4MP6-13 Mechanical and thermal properties of All-CSD-YBCO superconducting tapes and joints - Michael Baecker (Deutsche Nanoschicht GmbH)  
10:28 4MP6-14 Electrical and Strain Behaviors of Solid Nitrogen and Conduction Cooled YBCO Coil under Thermal Disturbance and Overcurrent Pulse - Liyuan Liu (Southwest jiaotong university)  
10:29 4MP6-15 Ion-irradiation effect of microwave surface resistance of YBa2Cu3Oy thin films in magnetic field - Shigetoshi Ohshima (Yamagata University)  
10:30 4MP6-16 Effect of neutron irradiation on critical currents of some REBaCuO superconducting tapes considered for magnets of fusion reactors - Miloš Jirsa (Institute of Physics CAS)  
10:15
Poster : 4MP7 - Coated Conductors 2/2 (until 12:15)
10:15 4MP7-02 Ic survival of the delaminated coated conductor and its potential application in superconducting joint - Feng Feng (Tsinghua University)  
10:16 4MP7-03 Thick YBa2C3O7-x layers with ink jet printing single deposition - Bohores Villarejo (ICMAB - CSIC)  
10:17 4MP7-04 Electro-mechanical property of YBCO coated conductors lap joint under multi-fields - Xingyi Zhang (Lanzhou University)  
10:18 4MP7-05 Long length inkjet-printed solution deposition planarization layers for 2G-coated conductors - Marta Vilardell (OXOLUTIA S.L.)  
10:19 4MP7-06 Manufacturing Process Upgrade and New Research Directions at SuperOx Japan - Valery Petrykin (SuperOx Japan)  
10:20 4MP7-07 Microstructures of Conductive Buffer Layers for YBCO Coated Conductors Using Cube-Textured Cu Tapes - Ataru Ichinose (Central Research Institute of Electric Power Industry)  
10:21 4MP7-08 Electrical and mechanical behavior of electrical, Pb- and Cd-free, joints with normal- and superconducting materials at low temperatures - Katrin Bäuml (Schneider Electric Sachsenwerk GmbH)  
10:22 4MP7-09 Measurement at 4 K of normal zone propagation velocity in commercial REBCO conductors - Maxime Matras (CERN)  
10:23 4MP7-10 Transport Current Characteristics with Material Properties of the Outer Layer of REBCO 2G Wire Having Composite Structure Using RF Sputtering Deposition Method - Ho Ik Du (Chonbuk National University)  
10:24 4MP7-11 Evaluation on Properties of YBCO tapes insulated by Electrocoating - Han Zhang (Dongfang Electric Corporation)  
10:25 4MP7-12 Fabrication and properties of aluminum alloy laminated GdBCO coated conductor - Sang-Soo Oh (Korea Electrotechnology Research Institute)  
10:26 4MP7-13 Induction soldering of coated conductor high temperature superconducting tapes with lead-free solder alloys - Marian Drienovsky (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)  
10:27 4MP7-14 Quality management in production of textured templates for 2G HTS wire - Alexey Mankevich (SuperOx)  
10:28 4MP7-15 Observation of Zero Resistance in As-electrodeposited FeSe - Aichi Yamashita (National Institute for Materials Science)  
10:29 4MP7-16 Study of Growth Process for YBa2Cu3Oy Coated Conductors with BaZrO3 Flux Pinning Centers by Monitoring Electrical Conductivity - Ryo Teranishi (Kyushu University)  
10:30 4MP7-17 Interfacial shearing stress induced by flux pinning in a superconducting coated conductor long strip with transport current in a perpendicular magnetic field - Yumei Yang (Lanzhou university of technology)  
10:31 4MP7-18 Microstructure and texture of a two level undercut-profile Ni-5at.%W substrate for coated conductors - Anders Wulff (Technical University of Denmark)  
10:32 4MP7-20 PLD manufacturing of superconducting tapes - Ralph Delmdahl (Coherent LaserSystems GmbH & Co. KG)  
10:33 4MP7-21 The effect of BaZrO3 nanoparticles on Jc in longitudinal magnetic field for TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy wires - Kota Hirai (Seikei University)  
10:34 4MP7-22 An approach to superconducting joints between REBCO coated conductors based on chemical solution deposition - Anke Kirchner (IFW Dresden)  
PM
14:00
Registration (until 18:00)
15:00
ESAS Board (until 17:30) (CICG : Room 18, Level -1)
18:00
Welcome reception CICG (until 20:00) (CICG : Exhibition Area)
12:15 --- Lunch break ---
13:30
Poser : 1EP3 - Squids (until 15:30)
13:30 1EP3-01 Ultrasound-Induced Magnetic Imaging of Tumors Targeted by Biofunctional Magnetic Nanoparticles - Jen-Jie Chieh (National Taiwan Normal University)  
13:31 1EP3-02 Rapid and quantitative discrimination of tumour cells on tissue slices - Herng-Er Horng (National Taiwan Normal University)  
13:32 1EP3-03 Investigation of geomagnetic orientation preserved in a stain containing iron compounds using a vector-type SQUID magnetometer - Yoshiaki Adachi (Kanazawa Institute of Technology)  
13:33 1EP3-04 Detection of Biological Targets Using HTS SQUID and Magnetic Markers - Keiji Enpuku (Kyushu University)  
13:34 1EP3-05 Ion implantation generation of normal/superconducting junctions for fabrication of all niobium SQUIDs - Yanping Zhang (Sumitomo Heavy industries, Ltd.)  
13:35 1EP3-06 Development of eddy current testing system using HTS-SQUID on a hand card for detection of fatigue cracks of steel plate used in highway roads - Akira Tsukamoto (SUSTERA)  
13:36 1EP3-07 Analysis of AC Impedance in Localized Region Using Magnetic Field Distribution Measured by HTS-SQUID - Kenji Sakai (Okayama University)  
13:37 1EP3-08 Ultra-sensitive SQUID system for pulsed field applications - Rainer Körber (Physikalisch-Technische Bundesanstalt)  
13:38 1EP3-10 Cryogenic Current Comparators for larger beamlines - Paul Seidel (University of Jena)  
13:39 1EP3-12 Adaptive suppression of power line interference in ultra-low field magnetic resonance imaging in an unshielded environment - Quan Tao (Shanghai Institute of Microsystem and Information Technology (SIMIT),Chinese Academy of Sciences)  
13:40 Low liquid helium consumption SQUID system with liquid nitrogen cooling interlayer for biomagnetism - Li Lu (Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences)  
13:41 1EP3-14 Detection of pressure-overloaded left ventricular hypertrophy based on current dipole estimation from magnetocardiograms of rats using HTS-SQUID system - Yuto Tsukamoto (WASEDA University)  
13:42 1EP3-15 The Study of Several System Key Parameters for the Measurement of Airborne Superconducting Full Tensor Magnetic Gradient - Jun Wu (Shanghai Institute of Microsystem and Information Technology Chinese Academy of Sciences)  
13:43 1EP3-16 Superconductive Resonator Configuration with Flux-Focuser as Ground Plane for RF-SQUID Magnetometer - Fatemeh Qaderi (Sharif University of Technology)  
13:44 1EP3-17 SQUID magnetometer system for high-sensitivity measurement of geomagnetic signals - Jun Kawai (Applied Electronics Laboratory, Kanazawa Institute of Technology)  
13:45 1EP3-18 Measurement of Magnetic Nanoparticles by Small HTS SQUID Array - Saburo Tanaka (Toyohashi University of Technology)  
13:46 1EP3-19 High-Tc SQUID detected low-field NMR and MRI for biomedical application - Shu-Hsien Liao (National Taiwan Normal University)  
13:47 1EP3-20 Development of a LTS-SQUID Based Airborne Full Tensor Gradiometers - Longqing Qiu (Shanghai Institute of Microsystem And Information Technology, CAS)  
13:48 1EP3-22 Cryptophane-Caged Xe-129 Relaxation Agent in Ultra-low Field NMR/MRI Based on High-Tc SQUID Detection - Quan Tao (Forschungszentrum Jülich)  
13:49 1EP3-23 High sensitivity analysis of the magnetization properties of magnetic nanoparticles changed by the viscosity of the water solution using HTS-SQUID - Ryota Isshiki (Okayama University)  
13:50 1EP3-24 Multipoint measurement of T (0, 1) mode guided wave using HTS-SQUID gradiometer - Natsuki Masutani (Kindai University)  
13:51 1EP3-25 Sensitivity improvement of sample rotation measurement method in HTS-SQUID magnetometer for measurement of diamagnetic materials - Yuta Nakamura (Okayama University)  
13:30
Poster : 1EP1 - Circuit Application & System (until 15:30)
13:30 1EP1-01 Arrays of stacked SNS Josephson junctions for pulse-driven Josephson voltage standards - Oliver Kieler (Physikalisch-Technische Bundesanstalt (PTB))  
13:30 1EP1-03 A fast wire-routing method and an automatic layout tool for RSFQ digital circuits considering wire-length matching - Nobutaka Kito (Chukyo University)  
13:31 1EP1-04 Logic Design of a 16-bit Bit-Slice Arithmetic Logic Unit for 32-/64-bit RSFQ Microprocessors - Guang-Ming Tang (Institute of Computing Technology, Chinese Academy of Sciences)  
13:32 1EP1-05 Die size requirements versus capability for SFQ SPGAs in multilayer fabrication processes - Coenrad Fourie (Stellenbosch University)  
13:33 1EP1-06 Microarchitectures for energy-efficient computing implemented in adiabatic quantum-flux-parametron logic - Christopher Ayala (Institute of Advanced Sciences - Yokohama National University)  
13:34 1EP1-07 Fabrication and Characterization of NbN-based Magnetic Josephson Junctions - Li Feng (SIMIT)  
13:35 1EP1-08 Superconducting And Cryogenic Environments For Quantum Technologies - Ziad Melhem (Oxford Instruments)  
13:36 1EP1-09 Superconducting and flexible multilayer high density interconnect - Samuel d'Hollosy (Hightec MC AG)  
13:37 1EP1-10 Characterization of Frequency-Dependent Nonlinear Effects in Pulse-Bias Waveform Synthesis - Christine Donnelly (NIST)  
13:38 1EP1-11 Inductance Extraction of Superconducting Structures in the Presence of Magnetic Materials - Kyle Jackman (Stellenbosch University, Department of Electrical and Electronic Engineering)  
13:39 1EP1-12 Design and implementation of AQFP-based register files for an AQFP 4-bit RISC microprocessor prototype - Qiuyun Xu (Yokohama National University)  
13:40 1EP1-13 Charge-based superconducting digital logic family using quantum phase-slip junctions - Uday Goteti (Auburn University)  
13:41 1EP1-14 Parallel Adders for Low-Pass Phase Modulation-Demodulation ADCs - Timur Filippov (HYPRES)  
13:42 1EP1-15 High-Resolution Characterization of Josephson Junctions and Magnetic Multilayers for Low-Power, Superconducting Logic and Memory Devices - Nancy Missert (Sandia National Laboratories)  
13:43 1EP1-16 Timing Characterization and Enabling Static Timing Analysis in Rapid Single Flux Quantum Circuits - Massoud Pedram (University of Southern California, Department of Electrical Engineering, Los Angeles, CA, USA)  
13:44 1EP1-17 Superconducting NbTi Flex Cables for High-Density Interconnects - Robin Cantor (STAR Cryoelectronics)  
13:30
Poster : 1EP2 - Detectors, sensors and other devices (until 15:30)
13:30 1EP2-03 Characterizing Thick Electroplated Bismuth Films as Hard X-ray TES Absorbers - Lisa Gades (Argonne National Laboratory)  
13:31 1EP2-04 Influence of YBaCuO ultrathin film characteristics and front end features on HEB THz mixer performance - Alain Kreisler (CentraleSupelec - GeePs)  
13:32 1EP2-05 Hybrid superconducting mesa-structure with spin filtering manganite interlayer - Kare'n Constantinian (Kotel’nikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)  
13:33 1EP2-06 MgB2 films for superconducting detectors - Sergey Cherednichenko (Chalmers University of Technology)  
13:34 1EP2-08 Phase-Slip Events in MoRe-Si(W)-MoRe heterostructures - Pascal Febvre (Université Savoie Mont Blanc)  
13:35 1EP2-09 Frequency Response Characteristics Analysis of High Detectivity Backside Illuminated Free-Membrane Type IR Superconducting Bolometer - Roya Mohajeri (Sharif University of Technology)  
13:36 1EP2-10 The Characteristics of THz Metamaterials based on YBCO Superconductor - Chiu-Hsien Wu (Department of Physics, National Chung Hsing University)  
13:37 1EP2-11 Progress of pulse-driven AC Josephson voltage standards at PTB - Johannes Kohlmann (PTB)  
13:38 1EP2-12 High-temperature superconducting nano-meanders made by high energy ion irradiation - Paul Amari (LPEM UMR 8213, ESPCI Paris)  
13:39 1EP2-14 Transition Edge Sensors for Quench Localisation in SRF Cavity Testing - Tobias Stegmaier (CERN)  
13:40 1EP2-15 Development of transition edge sensors for the application in real-time multispectral-fluorescence-microscopy - Katja Peiselt (Leibniz Insitut für Photonische Technologien)  
13:41 1EP2-16 Superconducting noise bolometer with microwave bias and readout for terahertz array applications - Artem Kuzmin (Karlsruhe Institute of Technology)  
13:42 1EP2-17 Effects of thermal parameters and boundary resistances of MgO substrate on the response of YBCO transition edge bolometers - Rana Nazifi Takantapeh (Sharif University of Technology)  
13:43 1EP2-18 Design and Optimization of a Terahertz Metamaterial Absorber for YBCO Superconductive Transition Edge Bolometer - Fatemeh Qaderi (Sharif University of Technology)  
13:44 1EP2-19 Focused He+-Ion Beam High Temperature Superconducting narrow nanowires - Cheryl Feuillet-Palma (ESPCI Paris - LPEM - UMR 8213)  
13:45 1EP2-20 Self-Monitoring, "SMART" REBCO coated conductors - Federico Scurti (North Carolina State University)  
13:46 1EP2-21 Proximity induced superconducting properties in high mobility two-dimensional electron gas quantum well in In0.75Ga0.25As heterostructures - Kaveh Delfanazari (Centre for Advanced Photonics and Electronics, University of Cambridge)  
13:47 1EP2-22 Noise temperature characterisations of YBCO step-edge junction terahertz mixer operating at temperatures above 40 K - Jia Du (Research Scientist CSIRO Manufacturing)  
13:30
Poster : 1LP1 - Cables for accelerator magnets (until 15:30)
13:30 1LP1-01 3D shape and cross sectional inhomogeneity of Nb3Sn superconducting wires in Rutherford cables - Christian Scheuerlein (Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany and University of Kaiserslautern (TUK), Kaiserslautern, Germany)  
13:31 1LP1-03 Critical Current Measurements of Nb3Sn Rutherford Cables under Transverse Pressure - Jean-Eudes Duvauchelle (CERN)  
13:32 1LP1-04 Characterization of Nb3Sn Rutherford cable degradation due to strand cross over - Jerome Fleiter (CERN)  
13:33 1LP1-05 Study on the Nb3Sn Rutherford Cable for High-Energy Accelerators - Yanmin Zhu (Western Superconducting Technologies Co., Ltd)  
13:34 1LP1-06 Sheared Subelement Length in MQXF Cables made from RRP(R) Strands - Ian Pong (Berkeley Lab)  
13:35 1LP1-07 Two-layers Rutherford Cable – Possible Solution for High Field Superconducting Magnet - Vitaly Vysotsky (Russian Scientific R&D Cable Institute)  
13:36 1LP1-08 Thermal analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR - Lukasz Tomkow (Lukasz Tomkow)  
13:37 1LP1-10 Phased Array Ultra Sounds Non Destructive Tests of Soldered Current-Carrying Bus-Bar Splices of Superconducting Magnets - Rosario Principe (CERN)  
13:38 1LP1-11 Comparison of mechanical concepts for Nb3Sn high field accelerator magnets - Mr Christian Löffler (CERN)  
13:30
Poster : 1LP2 - High field, NMR magnets and cables (until 15:30)
13:30 1LP2-02 In-house Industrial Assembly of the Superconducting Conductor for the 43 T Hybrid Magnet at LNCMI-Grenoble - Pierre Pugnat (CNRS/LNCMI-Grenoble)  
13:31 1LP2-03 Engineering Of New Class Of High Field Magnets For Research Application - Ziad Melhem (Oxford Instruments)  
13:32 1LP2-04 Shimming and Regulating a 36-T Hybrid Magnet for High Resolution NMR - William Brey (Florida State University - NHMFL)  
13:33 1LP2-05 Development of 400 MHz Cryogen Free Magnets for MAS Solid State NMR Spectroscopy - Jeremy Good (Cryogenic Ltd)  
13:34 1LP2-07 Conduction cooling system for a 400 MHz HTS NMR magnet - Sehwan In (Korea Institute of Machinery and Materials)  
13:35 1LP2-08 Design of a superconducting sensing structure with SQUIDs for sensitive gravity measurement - Xinning Hu (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:36 1LP2-09 A Superconducting Magnet System for Animal Imaging System - Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:37 1LP2-10 Recent development of the 25 T all-superconducting NMR magnet at IEE - Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:30
Poster : 1LP3 - AC losses (until 15:30)
13:30 1LP3-01 Inter-strand resistance in REBCO Roebel cables and effect on AC loss - Simon Otten (Karlsruhe Institute of Technology)  
13:31 1LP3-03 Ac loss calculation of a cosine-theta dipole magnet wound with coated conductors considering iron yoke influence - Yusuke Sogabe (Kyoto University)  
13:32 1LP3-04 AC loss in REBCO stator windings of superconducting motors for electric and hybrid aircrafts - Enric Pardo (Institute of Electrical Engineering, SAS)  
13:33 1LP3-05 Simulations of electromagnetic behaviors of joint in YBCO coated conductors with 3D finite-element analysis - Huadong Yong (Lanzhou University)  
13:34 1LP3-06 Influence of Three Phases Imbalance on the AC Losses of Tri-axial HTS CORC Cable used in an All-Electric Aircraft - Zixuan Zhu (University of Bath)  
13:35 1LP3-07 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft - Yawei Wang (University of Bath)  
13:36 1LP3-08 Quench propagation in Rutherford MgB2 cables - Álvaro Cubero (Instituto de Ciencia de Materiales de Aragón (ICMA), CSIC – Universidad de Zaragoza)  
13:37 1LP3-09 Calculation of interstrand coupling losses in superconducting Rutherford cables with a continuum model - Marco Breschi (University of Bologna)  
13:38 1LP3-11 Dynamic resistance measurement in a four-tape YBCO stack - Zhenan Jiang (Victoria University of Wellington)  
13:39 1LP3-12 Analysis of AC loss in different stacks of YBCO superconducting tapes - Changxin Chi (Shanghai University/Shanghai Key Laboratory of High Temperature Superconductors)  
13:40 1LP3-13 AC Losses in HTS Coils for Wireless Power Transfer Applications - Boyang Shen (University of Cambridge)  
13:41 1LP3-14 Simulation of linear generator made of HTS pancake coils stack - Sukru Yildiz (Ahi Evran University)  
13:42 1LP3-15 Measurements of crossed-field demagnetisation rate of trapped field magnets at 20-77 K and high frequencies - Algirdas Baskys (University of Cambridge)  
13:43 1LP3-17 Dragging hysteresis forces in a linear displacer with Coated Conductor Stacks - José López (Physics Departament, UPC Barcelona Tech)  
13:44 1LP3-18 Magnetization of rectangular 2G HTS stacks and dragging forces developed inside a multipolar magnetic channel: trapped field, current distribution and forces - Miquel Carrera (Institut de Ciència de Materials de Barcelona, ICMAB-CSIC)  
13:45 1LP3-20 AC loss in HTS fusion cables: measurements, modeling and scaling laws - Nikolay Bykovsky (EPFL Swiss Plasma Center)  
13:46 1LP3-21 Multi-scale Model for AC Loss Calculation in Large-scale HTS-SMES - Ying Xu (Huazhong University of Science and Technology)  
13:47 1LP3-22 Effect of striation in assembled coated conductors - Naoyuki Amemiya (Kyoto University)  
13:48 1LP3-23 Transport AC loss measurements in bifilar stacks composed of YBCO coated conductors - Wenjuan Song (Beijing Jiaotong University, China; Victoria University of Wellington, New Zealand)  
13:30
Poster : 1LP4 - Levitation, transportation and propulsion (until 15:30)
13:30 1LP4-01 The measurement and modeling of the levitation force between single grain YBCO bulk superconductors and permanent magnets - Antonio Morandi (University of Bologna - DEI)  
13:31 1LP4-02 Comparative analysis of the specific characteristics of the magnetic bearings with HTS elements - Ekaterina Kurbatova (National Research University "Moscow Power Engineering Institute")  
13:32 1LP4-04 Bulk superconductor levitation devices: Advances in and prospects for development - Uta Floegel-Delor (Adelwitz Technologiezentrum GmbH (ATZ))  
13:33 1LP4-05 Increase of levitation properties owing to high magnetic field in magnetic levitation system with magnetic shielding effect of HTS bulks - Naohiro Negishi (Sophia University)  
13:34 1LP4-06 Thermal characteristics of a 400mm diameter levitating rotor in a superconducting magnetic bearing operating below at 10K for a CMB polarization experiment - Yuki Sakurai (Kavli IPMU (WPI), UTIAS, The University of Tokyo)  
13:35 1LP4-07 Simulation of magnetization and heating processes in HTS tapes stacks - Irina Anishchenko (National Research Nuclear University MEPhI)  
13:36 1LP4-08 Prototype of a Rings based zero-field-cooled (ZFC) YBCO magnetic bearing - António Arsénio (IDMEC, Instituto Superior Técnico, Universidade de Lisboa)  
13:37 1LP4-09 Fabrications and Cooling Tests on Conduction Cooled HTS Coils with Heat Pipes - Jun Tokushige (Kagoshima University)  
13:38 1LP4-10 Influence of magnetic field configuration on levitation force for HTS tapes stack - Dmitry Abin (National Research Nuclear University MEPhI)  
13:39 1LP4-12 The levitation force of CC-tapes stack at different temperatures. - Maxim Osipov (National Research Nuclear University MEPhI)  
13:40 1LP4-13 Effect of Anisotropic Magnetization of HTS Bulk superconductors with Different Shapes on Suspension Rotational Loss - Wenjiang Yang (Beihang University)  
13:41 1LP4-15 High-Tc Superconducting Maglev Prototype Vehicle Running at a 160 km/h in an Evacuated Circular Test Track - Yong Zhao (Southwest Jiaotong University)  
13:30
Poster : 1LP5 - Motors, generators and other rotating machines (until 15:30)
13:30 1LP5-03 Electrical Losses and Temperature Distribution Analysis of a HTS Motor Considering PWM Schemes in Voltage Source Inverter - Ji Hyung Kim (Dept. of Electrical Engineering, Jeju National University)  
13:31 1LP5-04 Numerical Analyses on Influences of Armature Winding Shape and Yoke Arrangements on Total Losses in Fully Superconducting Synchronous Motors Using REBCO Tapes - Akifumi Kawagoe (Kagoshima University)  
13:32 1LP5-05 Comparative Characteristics of Rotary HTS Flux-pump considering Rotational State of HTS Load - Jeyull Lee (Yonsei University)  
13:33 1LP5-06 Design of a DC Transformer by an HTS Homopolar Motor-Generator Set - Seyon Lee (Korea Polytechnic University)  
13:34 1LP5-08 Experiments and Modelling of a Synchronous-Hysteresis Superconducting Machine with Stacks of Second Generation Tapes - Guilherme Goncalves Sotelo (Universidade Federal Fluminense)  
13:35 1LP5-09 Superconductors under dynamic electromagnetic conditions in electric machines - Peter O'Brien (Queensland University of Technology)  
13:36 1LP5-10 Reduction and elimination of ac-losses in the superconducting super motor - Minaru Kawamura (Okayama University of Science)  
13:37 1LP5-12 Fabrication of a scaled MgB2 racetrack demonstrator pole for a 10 MW direct drive wind turbine generator - Niklas Magnusson (SINTEF Energy Research)  
13:38 1LP5-13 A Novel Axial-Flux Magnetic Gear Using Stationary HTS Excitation - Peng Gao (China University of Petroleum)  
13:39 1LP5-14 Test of a Rotary HTS Flux-pump using Electromagnet for Constant Field Current of HTS Synchronous machine - Haeryong Jeon (Yonsei University)  
13:40 1LP5-15 Study on the optimal arrangement according to the purpose of superconducting bulk. - Kazuhito Yamagishi (Yokohama National University)  
13:41 1LP5-16 Relationship between Eccentricity and Amplitude of a Rotor Having a Non-uniform Magnetization Distribution Supported by a Superconducting Magnetic Bearing - Hirotaka Ishii (Graduate School of Science and Technology Keio University)  
13:42 1LP5-19 3D Modeling of Coils for Pulsed Field Magnetization of HTS Bulk Pellets Placed on an Inductor of a Superconducting Electrical Machine - Kévin Berger (GREEN - University of Lorraine)  
13:43 1LP5-20 Characterization of oriented and non-oriented electrical steels using the Epstein frame and a magnetic core, at room and cryogenic temperatures - Anabela Pronto (UNINOVA-Centro de Tecnologia e Sistemas)  
13:44 1LP5-21 Lorentz Force Velocimetry based on HTS bulk magnet system - Oleksii Vakaliuk (Technische Universität Ilmenau)  
13:30
Poster : 1LP6 - Transformers, SMES and fault current limiters (until 15:30)
13:30 1LP6-01 Current limiting cooperation of superconducting transformers and cables - Takayuki Tokuchi (Kyushu University)  
13:31 1LP6-02 Fault tolerant HTS transformers: increasing the fault withstand time and recovery current - Mike Staines (Robinson Research Institute, Victoria University of Wellington)  
13:32 1LP6-03 Hybrid HTS-copper transformer of large turn-to-turn ratio - Mariusz Stepien (Silesian University of Technology)  
13:33 1LP6-04 The proposal of contact cooling system for superconducting transformer winding made of parallel tapes with transpositioners - Beata Kondratowicz-Kucewicz (Electrotechnical Institute)  
13:34 1LP6-05 Proposal to substitute Roebel cable with parallel tapes with clusters of transpositioners in modular construction of superconducting transformer windings - Grzegorz Wojtasiewicz (Electrotechnical Institute)  
13:35 1LP6-06 Considerations of HTS 2G superconducting transformer temperature during short circuit - Grzegorz Wojtasiewicz (Electrotechnical Institute)  
13:36 1LP6-07 The new concept of using the superconducting transformers in low and medium voltage distribution network - Slawomir Kozak (Electrotechnical Institute)  
13:37 1LP6-08 Optimization and analysis of a spherical 3-phase transformer having 2G HTS windings - Paweł Lasek (Silesian University of Technology, Falculty of Electrical Engineering)  
13:38 1LP6-13 Enhancing Fault Ride Through Capability and Transient Stability of DFIG with SMES-FCL - Zixuan Zheng (Sichuan University)  
13:39 1LP6-14 Application of Superconducting Magnetic Energy Storage for Stabilizing the Grid Integrated with Wind Power Generation Systems - A Review - Vutukuru Vasudeva Rao (Indian Institute of Technology KHARAGPUR)  
13:40 1LP6-15 Modeling and analysis of superconducting fault current limiter for system integration of battery banks - Doaa M. Yehia (Tanta University)  
13:41 1LP6-16 Improving Voltage Stability in DC Distribution Systems Using Small Scale Superconducting Magnetic Energy Storage - Doaa M. Yehia (Tanta University)  
13:42 1LP6-18 Design of a Medium Voltage Superconducting Series Reactor for a Grid-Connected Power Engineering Research Site - Mohamed Fayaz Khan (University of KwaZulu Natal)  
13:43 1LP6-19 Superconducting Power Filter for DC Electrical Grids - Loïc Queval (GeePs, CentraleSupélec, Univ. Paris-Saclay)  
13:44 1LP6-20 Effective Grid Integration of Superconducting Magnetic Energy Storage Using Current-Fed Z-Source Converter - Diaa-Eldin A. Mansour (Tanta University)  
13:30
Poster : 1LP7 - FCL : design and devices (until 15:30)
13:30 1LP7-01 Comparison of shell vs. core-type magnetic circuits in the performance of inductive superconducting fault current limiters under asymmetric faults - Joao Murta-Pina (Centre of Technology and Systems (Uninova))  
13:31 1LP7-02 Analysis of the effects of different types of faults in three-phase saturated cores SFCL - Nuno Vilhena (FCT / UNL)  
13:32 1LP7-03 Peak Current Limiting Characteristics of Transformer Type SFCL with Two Non-Isolated Secondary Windings - Tae-Hee Han (Jungwon University)  
13:33 1LP7-04 SFCL cooling characteristics according to the control variables - Hankil Yeom (KIMM)  
13:34 1LP7-06 Comparison of dual peak current limiting with current source location of a series-connected SFCL using two iron cores - Seok-Cheol Ko (Kongju National University)  
13:35 1LP7-07 Volume Effect of Dynamic Breakdown Strength in LN2 for Insulation Design of Resistive Superconducting Fault Current Limiters - Naoki Hayakawa (Nagoya University)  
13:36 1LP7-08 Magnetizing Characteristics of a Flux-Lock-Type SFCL with Two Magnetic Paths Using Its Third Winding - Sung-Hun Lim (Soongsil University)  
13:37 1LP7-09 Engineering design and test of low-resistance high temperature superconducting short-circuited coils - Joao Murta-Pina (Centre of Technology and Systems (Uninova))  
13:38 1LP7-10 Improvement of recovery characteristics of resistive SFCL made by GdBCO tape with several surface conditions under pressurized condition - Satoshi Takaya (Kyoto University)  
13:39 1LP7-11 Increase of the normal resistivity of REBCO tapes for 320 kV superconducting fault current limiters - Guillaume Escamez (NEXANS/SuperGRID)  
13:40 1LP7-12 Winding Design and AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter - Sinian Yan (State Key Laboratory of Advanced Electromagnetic Engineering and Technology,Huazhong University of Science and Technology)  
13:41 1LP7-13 Magnetizing Characteristics of Transformer Type SFCL with Additional Secondary Winding Due to Its Winding Direction - Shin-Won Lee (Jungwon University)  
13:42 1LP7-14 Measurements of electromechanical forces in superconducting fault current limiters tapes under short circuit conditions - Anabela Pronto (UNINOVA-CTS)  
13:43 1LP7-15 A Design Methodology for Optimisation of three-phase SFCL of Saturated Cores Type - Nuno Vilhena (FCT / UNL)  
13:44 1LP7-16 Operation of a SCFCL at 65 K - Pascal Tixador (Grenoble INP)  
13:45 1LP7-17 Research on the Magnetic Property of Saturated Iron-core Superconducting Fault Current Limiter - Chi Zhang (Huazhong University of Science and Technology)  
13:46 1LP7-18 Experiment and design of new type DC superconducting fault current limiter - Chaoqun Zhao (Tianjin University)  
13:47 1LP7-19 Design, building and test of a 220V/300A braid type superconducting fault current limiter - Fei Liang (Bath University)  
13:48 1LP7-20 Experiments on a new type of DC superconducting fault current limiter - Ying Xin (Tianjin University)  
13:49 1LP7-21 HTS Power devices with low cryo-consumption for current conditioning, switching and limiting - Alexander Usoskin (Bruker HTS GmbH)  
13:50 1LP7-22 Short-Circuit Current Limitation Through 2G YBCO Resistive-Type SFCL Devices: Technical and Economic Comparison with Traditional Air-Core Reactors - Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)  
13:51 1LP7-23 Experimental tests and analysis of a small-scale Noval Hybrid Type DC SFCL Prototype - Siyuan Liang (School of electrical and electronic engineering, Huazhong University of Science and Technology; State Key Laboratory of Advanced Electromagnetic Engineering and Technology)  
13:52 1LP7-24 Preliminary Investigation on Economic Aspects of Superconducting Magnetic Energy Storage (SMES) Systems and High Temperature Superconducting Transformers (HTST) - Weijia Yuan (Florida State University Center for Advanced Power Systems)  
13:30
Poster : 1MP1 - Strain and Irradiation (until 15:30)
13:30 1MP1-01 Microstructure and mechanical properties of high manganese steel processed by cold working and aging at 4.2K - Yi Shi (Institute of Plasma Physics)  
13:31 1MP1-02 Effects of rolling deformation on the critical current under transverse stress of PIT Nb3Sn wires - Luc Gamperle (University of Geneva, Departement of Quantum Matter Physics)  
13:32 1MP1-03 X-ray Stress Measurement of CrN coated Practical Nb3Sn Superconducting Wire - Shutaro Machiya (Daido University)  
13:33 1MP1-04 Characterization of irreversible degradation of Nb3Sn Rutherford cables due to transversal compression stress at room temperature - Patrick Ebermann (CERN)  
13:34 1MP1-05 Axial tensile stress-strain characteristics of WST high Jc Nb3Sn strands - Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)  
13:35 1MP1-06 E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples - Luigi Muzzi (ICAS S.C.r.l.)  
13:36 1MP1-07 Prediction of Strain Degradation in Superconducting Accelerator Magnets Nb3Sn Coils Using Exponential Scaling Laws - Giorgio Vallone (CERN)  
13:37 1MP1-09 Influence of the microstructure on the pinning force scaling behavior of Nb3Sn wires - Thomas Baumgartner (TU Wien, Atominstitut)  
13:38 1MP1-10 Fast neutron irradiation on K doped Ba-122 Single Crystals - Daniel Kagerbauer (TU Wien, Atominstitut)  
13:39 1MP1-11 Effects of proton irradiation on the vortex dynamics of Fe(Se,Te) thin films - Valeria Braccini (CNR-SPIN)  
13:40 1MP1-12 Numerical simulation of die compaction of Mg and B powder mixture using pressure-dependent constitutive model - Young-Seok Oh (Korea Institute of Materials Science)  
13:41 1MP1-13 Improvement of the tensile and bending stress tolerance on MgB2 wire made by In-situ method - Hideki Tanaka (Hitachi)  
13:30
Poster : 1MP2 - Cuprate Thin Films 1/2 (until 15:30)
13:30 1MP2-01 Vortex pinning study on epitaxial YBa2Cu3O7-x thin film grown on decorated MgO(001) single crystal substrates with La0.66Sr0.33MnO3 nano-islands - Traian Petrisor Jr. (Technical University of Cluj-Napoca)  
13:31 1MP2-02 Ink-jet printing of low-fluorine YBCO nanocomposite thin films with preformed HfO2 nanocrystals - Hannes Rijckaert (Ghent University)  
13:32 1MP2-03 Double-sided inkjet printed YBCO films on CZO/YSZ buffered sapphire substrates - Roxana Vlad (Oxolutia SL)  
13:33 1MP2-05 Effects of Zr Doping on Magnetic and Structural Properties of DyBa2Cu3O7-d Thin Films - Yuri Aparecido Opata (DTU Energy - Technical University of Denmark)  
13:34 1MP2-06 TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy films on CeO2 buffered R-Al2O3 substrates - Keita Sakuma (Seikei University)  
13:35 1MP2-07 Microwave-assisted YBCO precursors: A fast and reliable method towards chemical precursors for superconducting thin films - Hannes Rijckaert (Ghent University)  
13:36 1MP2-08 Preparation of YBa2Cu3O7-δ and (La0.85Sr0.15)2CuO4 multilayered structure for superconducting connection - Yuhei Shimizu (National Institute of Advanced Industrial Science and Technology)  
13:37 1MP2-09 Preparation of YBa2Cu3O7 - BaMO (M=Zr, Hf) superconductor nanocomposite using colloidal solution with preformed nanoparticles - Ziliang Li (Institut de Ciència de Materials de Barcelona, CSIC)  
13:38 1MP2-10 The influence of seed layer on the structure and superconducting property of BaHfO3 doped Y0.5Gd0.5Ba2Cu3O7-δ film prepared by pulsed laser deposition - Linfei Liu (Shanghai Jiao Tong University)  
13:39 1MP2-12 The phase stability diagram of GdBa2Cu3O7-δ for the nominal composition and refinement of oxide inclusion in GdBCO films in low oxygen pressures - Insung Park (Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM), Seoul National University, Korea)  
13:40 1MP2-13 Synthesis and characterization of Y(1-x)NdxBa2Cu3O7-δ High Temperature Superconductors by Acetate Method - Marcelo Neves (Uerj)  
13:41 1MP2-14 High growth rate of YBCO films by Transient Liquid Assisted Growth by oxygen partial pressure control - Silvia Rasi (Universitat de Girona)  
13:42 1MP2-15 Impact of Humidity and the Additive 2,4-Pentanedione during the Pyrolysis of Gd0.5Y0.5Ba2Cu3O7-x Superconductors Prepared by Chemical Solution Deposition - Carl Buehler (Karlsruhe Institute of Technology)  
13:43 1MP2-16 Role of Oxygen exchange kinetics in the engineering of carrier concentration of YBa2Cu3O7-δ films - Alexander Stangl (ICMAB-CSIC)  
13:44 1MP2-17 Effect of oxygen partial pressure during annealing process on the epitaxy of LZO buffer layer for coated conductors - Ping Ji (Northwest Institute for Nonferrous Metal Research, Xi’an 710016, P. R. China)  
13:30
Poster : 1MP3 - Measurement Techniques 1/2 (until 15:30)
13:30 1MP3-02 Experimental and numerical investigation of shielding performances of superconducting shields using CC tapes - Yoh Nagasaki (GeoCosmo Science and Research Center)  
13:31 1MP3-03 Exploitation-generated changes in the resistance-temperature characteristics of the coal resistors (TVO) - Kamil Kozłowski (Joint Institute for Nuclear Research)  
13:32 1MP3-04 Selecting FBG coatings for optical fiber sensing of Quench in high temperature superconductor - Yanchao Liu (Beijing Jiaotong university)  
13:33 1MP3-05 Efficient cooling for electric current transport stability in superconducting materials - Francesco Avitabile (Dipartimento di Fisica, Università degli Studi di Salerno)  
13:34 1MP3-07 Determination of the complete penetration magnetic field of a HTS pellet from the measurements of the magnetic field at its top-center surface - Bruno Douine (UBO)  
13:35 1MP3-08 Comparison of magnetizing characteristics of superconducting bulk magnet cooled by　Stirling and GM refrigerators during pulsed field magnetization - Kazuya Yokoyama (Ashikaga Institute of Technology)  
13:36 1MP3-11 High resolution imaging of magnetic flux distributions in superconductors with scanning x-ray microscopy at low temperatures - Stephen Ruoß (Max-Planck-Institute for Intelligent Systems Stuttgart)  
13:37 1MP3-12 Development of Image Analysis Techniques for Quantitative Microscopy on Superconducting Materials - Peter Lee (Applied Superconductivity Center, NHMFL, FSU)  
13:38 1MP3-13 Correlating magnetic flux distributions with superconductor microstructure using magnetic force microscopy - Josef Hazi (Oxford University)  
13:30
Poster : 1MP4 - Flux Pinning Non-Cuprates (until 15:30)
13:30 1MP4-01 Correlation of the microstructure and magnetic properties of neutron irradiated Nb3Sn superconductors - Stephan Pfeiffer (TU Wien)  
13:31 1MP4-02 High performance MgB2 bulks using carbon-coated amorphous boron and silver addition - Masaki Higuchi (Shibaura Institute of Technology)  
13:32 1MP4-03 Experimental evaluation for characteristics of MgB2 Rutherford cables with a large current capacity - Sora Mizuochi (Sophia University)  
13:33 1MP4-04 Flux pinning by InAs nanorods in Nb - Dong Ho Kim (Yeungnam University)  
13:34 1MP4-06 Local probing of superconducting condensate - Ritika Panghotra (KU Leuven)  
13:35 1MP4-08 Anisotropy Effects on the Quenching Current of FeSeTe Thin Films - Antonio Leo (Department of Physics "E. R. Caianiello", University of Salerno, and CNR-SPIN, Salerno)  
13:36 1MP4-09 Analysis of flux pinning forces in bulk superconductors for applications - Michael Koblischka (Saarland University)  
13:37 1MP4-10 Enhanced critical current density in bulk MgB2 - Miryala Muralidhar (Shibaura Institute of Technology)  
13:30
Poster : 1MP5 - Magnetization and Trapped Field + AC Losses 1/2 (until 15:30)
13:30 1MP5-01 Magnetic study of the low temperature anomalies in the optimally doped PrBCO compound - Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)  
13:31 1MP5-02 Electromagnetic field analysis of a twisted superconducting strip with sweeping magnetic field - Yoichi Higashi (National Institute of Advanced Industrial Science and Technology)  
13:32 1MP5-04 Magnetic Measurements of the Critical Current Density in HTS Tapes in the Field Range up to 30T with self-field corrections. - Andrew Smith (University of Durham)  
13:33 1MP5-05 Accurate Loss Estimation of Coated Conductors in External Magnetic Fields: Dynamic Loss and Magnetisation Loss - Quan Li (University of Edinburgh)  
13:34 1MP5-06 Magnetization of YBCO film with ac travelling magnetic waves of relatively short wavelengths - Wei Wang (No.24 South Section 1, Yihuan Road)  
13:35 1MP5-07 Magnetization Loss Characteristics of a Pancake Coil Fabricated by GdBCO Tape in kHz Frequency Band - Ryota Inoue (Tohoku University)  
13:36 1MP5-08 Theoretical evaluation of the screening-current-induced field in HTS coils with tape wires - Yasunori Mawatari (National Institute of Advanced Industrial Science and Technology (AIST))  
13:37 1MP5-09 AC Loss Analysis of High Temperature Superconducting Conductors on Round Core - Seyeon Lee (Korea Polytechnic University)  
13:38 1MP5-10 Measurements and numerical modelling of magnetization loops in two level undercut-profile substrate-based filamentary coated conductors - Andrea Insinga (Technical University of Denmark)  
13:39 1MP5-11 Magnetization AC losses in flat Al sheated MgB2 cables - Ján Kováč (Institute of Electrical Engineering Slovak Academy of Science)  
13:40 1MP5-12 Magnetization profiles of AC type-II superconducting wires subject to constant sources of magnetic field - Harold Steven Ruiz (University of Leicester)  
13:41 1MP5-14 Electromagnetic response of DC type-II superconducting wires under oscillating magnetic excitations - Bright Chimezie Robert (University of Leicester)  
13:42 1MP5-15 Numerical Analysis of AC Losses in YBCO Conductors Carrying AC Transport Current with Defect under AC Magnetic Field - Wei Chen (Southwest Jiaotong University)  
13:30
Poster : 1MP6 - MgB2 1/2 (until 15:30)
13:30 1MP6-01 Magnetic Microscopy for Nondestructive Characterization of Local Critical Current Distribution in Multi-filamentary MgB2 Wires with Magnetic Sheath Materials - Shuhei Bochi (Kyushu University)  
13:31 1MP6-03 Achievements of high pressure MgB2 synthesis: can in situ samples reach mass density and grain connectivity of Mg diffusion samples? - Tomasz Cetner (Institute of High Pressure Physics PAS)  
13:32 1MP6-04 Effect of sintering conditions on modified IMD wire deformed by hydroextrusion - Miloslav Kulich (Institute of Electrical Engineering)  
13:33 1MP6-05 Aging of commercial MgB2 wires in liquid hydrogen - Wilfried Goldacker (Karlsruhe Institute of Technology)  
13:34 1MP6-06 Development and characterization of a multifilamentary MgB2 superconducting wire - Durval Rodrigues Jr (Escola de Engenharia de Lorena - Universidade de São Paulo)  
13:35 1MP6-07 Effect of Bi mixing routes on MgB2 superconductors - Kookchae Chung (Korea Institute of Materials Science)  
13:36 1MP6-08 The Effect of Bi-2212 Addition on The Superconducting Properties of Bulk MgB2 Samples - Meryem Alp (Ankara University)  
13:37 1MP6-09 Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor - Elena Martínez (ICMA (CSIC - Universidad de Zaragoza))  
13:38 1MP6-11 Optimization of high isostatic pressure annealing processes for fabrication of MgB2 and Ba(Fe,Co)2As2 superconducting wires with high critical current density - Andrzej Morawski (Institute of High Pressure Physics Polish Academy of Sciences Unipress)  
13:39 1MP6-12 Composite superconducting MgB2 wires made by continuous process - Bartek A. Glowacki (Department of Materials Science and Metallurgy, University of Cambridge)  
13:40 1MP6-13 Effects of Dy2O3 doping on the Anisotropy and Transport of MgB2 wires - Mike Sumption (MSE, The OHio State University)  
13:30
Poster : 1MP7 - Coated Conductors 1/2 (until 15:30)
13:30 1MP7-01 The influence of laser energy density on microstructure and critical current of YGBCO and HGBCO films prepared by PLD - Xiang Wu (Shanghai Jiao Tong University)  
13:31 1MP7-02 Development of textured YBa2Cu3O7−x superconducting coated conductors by Fluorine-Free MOD Route - Jingyuan Chu (Shanghai Jiao Tong University)  
13:32 1MP7-03 Enhanced flux pinning in TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy+BaZrO3 coated conductors by introducing an intermediate heat treatment - Michio Sato (Seikei University)  
13:33 1MP7-05 Tactical approaches in pilot-line manufacturing of HTS coated conductors for high field magnet application - Ulrich Betz (Bruker HTS GmbH)  
13:34 1MP7-06 Fabrication of HTS coated conductors via advanced high speed PLD process in Compact Pilot Line - Alexander Usoskin (Bruker HTS GmbH)  
13:35 1MP7-07 Enhancement of flux pinning by random pinning centers at 4.2 K in BaHfO3-doped SmBa2Cu3Oy coated conductors - Shun Miura (Kyushu University)  
13:36 1MP7-08 Effect of twin boundaries on the in-field Jc for TFA-MOD-(Y0.77Gd0.23)Ba2Cu3Oy wires - Ryota Oku (Seikei University)  
13:37 1MP7-10 Heating tolerance of critical current in industrial coated conductors - Davide Uglietti (EPFL)  
13:38 1MP7-12 Soldered contacts for HTS coated conductors - Kai Ackermann (Karlsruhe Institute of Technology)  
13:39 1MP7-13 Investigation Of Soldered Low-Resistance Joints For Commercial Coated Conductors Depending On Various Contact Pressures - Pavel Degtyarenko (Joint Institute for High temperature of Russian Academy of Sciences)  
13:40 1MP7-14 Determination of irreversible strain and stress limits of practical REBCO CC tapes under uniaxial tension - Hyung-Seop Shin (Andong National University)  
13:41 1MP7-15 Joint resistance characteristics of REBCO CC lap-joints using ultrasonic welding method in various temperatures and magnetic fields - Mark A. Diaz (Andong National University)  
13:42 1MP7-17 Development of a reel-to-reel process for laser structuring of coated conductors - Rainer Nast (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))  
13:43 1MP7-18 Increased pinning strength in 2nd generation REBCO coated conductors grown by liquid assisted processes. - John Feighan (University of Cambridge)  
13:44 1MP7-19 Joining of second generation coated conductor tapes using a melt-texturing route - Hagen Bryja (IFW Dresden)  
13:45 1MP7-20 Coated superconducting tape model based on distribution of currents between the tape layers. Computing implementation - Alfredo Álvarez (University of Extremadura)  
13:46 1MP7-21 Correlation between resistances of face-to-face soldered joints and interface resistance between layers in superconducting tapes - Nadezda Bagrets (Karlsruhe Institute of Techology)  
13:47 1MP7-22 Coated conductor HTS tape for energy and magnet applications - Markus Bauer (THEVA Dünnschichttechnik GmbH)  
15:30 --- Coffee Break ---
15:50
1P2 - Lessons learned (until 18:00)
16:00 2P2-01 The LHC Main Magnet Electrical Interconnections: the Subtle Size of Superconductivity - Lucio Rossi (CERN)  
16:30 2P2-02 Some of the lessons learned during the construction and use of super magnets conductors in the last decades - Roberto Penco (P.R.D. sas Genova)  
17:00 2P2-03 Learning from R&D and operation of HTS insert coil for high field magnet - Satoshi Awaji (Tohoku University)  
17:30 2P2-04 Transformation and perspectives of digital superconducting electronics - Oleg Mukhanov (Hypres)  
18:00 --- Exhibitor Reception ---
12:15 --- Lunch break ---
13:30
2LO3 - Fusion and Medical Applications (until 15:30)
13:30 2LO3-01 Overcoming the Challenges of the ITER Magnets - Neil Mitchell  
14:00 2LO3-02 Manufacturing the European superconducting TF coils for ITER - Marc Cornelis (Fusion for Energy)  
14:15 2LO3-03 Damage investigations in the HTS cable prototype after the cycling test in EDIPO - Nikolay Bykovsky (EPFL Swiss Plasma Center)  
14:30 2LO3-04 Recent progress in development of Bi2212 Cable-in-Conduit Conductor - Shi Yi (Institute of Plasma Physics, CAS and ASIPP)  
14:45 2LO3-05 Stability Analysis of the 100 kA-class HTS STARS Conductor - Yoshiro TERAZAKI (National Institute for Fusion Science)  
15:00 2LO3-06 Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems - Matt Rindfleisch (Hyper Tech Research)  
15:15 2LO3-07 Development of High Stable Magnetic Field HTS Magnet System for MRI - Shoichi Yokoyama (Mitsubishi Electric Corporation,Advanced Technology R & D Center)  
13:30
2MO3 - Fe-based (until 15:30)
13:30 2MO3-01 Recent progress in Fe-based superconducting wires and tapes - Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)  
14:00 2MO3-02 Fe(Se,Te) epitaxial thin films deposited on metallic alloys with or without buffer layer - Valeria Braccini (CNR-SPIN)  
14:15 2MO3-03 Flux pinning behaviour of a BaFe2(As1-xPx)2 thin film on IBAD-MgO technical substrate - Jena Hänisch (Karlsruhe Institute of Technology)  
14:30 2MO3-04 The key microstructural factors for high transport current in randomly oriented 122 polycrystalline materials - Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)  
14:45 2MO3-05 High performance Ba0.6K0.4Fe2As2 superconducting tapes at high magnetic field and high temperature with hot-pressing process - He Huang (Institute of Electrical Engineering, Chinese Academy of Science)  
15:00 2MO3-06 In-plane anisotropy of the critical current density in detwinned Co doped Ba122 single crystals - Johannes Hecher (TU Wien, Atominstitut)  
15:15 2MO3-07 Critical current density and the phase diagram of CaKFe4As4 single crystals - Shiv Jee Singh (University of Oxford)  
13:30
2MO4 - Progress in HTS Conductor Industry (until 15:31)
13:30 2MO4-01 Double-disordered HTS coated conductors and their assemblies aimed for ultra-high fields: large area tapes - Ulrich Betz (Bruker HTS GmbH)  
13:41 2MO4-02 Progress of Wire Development and Process Improvement on 2G HTS at SuperPower - Drew Hazelton (SuperPower Inc.)  
13:52 2MO4-03 Developement of long-length BMO doped REBCO coated conductors by hot-wall PLD process - Shinji Fujita (Fujikura Ltd.)  
14:03 2MO4-04 Development of 2G HTS wire production at SuperOx - Alexander Molodyk (S-Innovations)  
14:14 2MO4-05 Progress in SuNAM’s Coated Conductor Manufacturing - Hunju Lee (SuNAM Co., Ltd.)  
14:25 2MO4-06 Cost-effective production of HTS wires by chemical solution deposition - Michael Baecker (Deutsche Nanoschicht GmbH)  
14:36 2MO4-07 Multi-deposited inkjet printed YBCO on IBAD-MgO arquitectures for coated conductors - Alberto Calleja (OXOLUTIA SL)  
14:47 2MO4-08 Progress of REBCO coated conductor program at SJTU and SSTC - Yijie Li (Shanghai Jiao Tong University)  
14:58 2MO4-09 Thick Films of REBaCuO/YBaCuO and Long-length Coated Conductors Derived by Reel-to-Reel Metallorganic Solution and Ion-beam Assisted Depositions - Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors,Shanghai University/Shanghai Creative Superconductor Technologies Co. Ltd.)  
15:09 2MO4-10 Advances in Bi-2223 wire for High Field Applications - Shin-ichi Kobayashi (Sumitomo Electric Industries, Ltd.)  
15:20 2MO4-11 2G HTS Coated Conductors Buffer Stack Architecture Improvements at STI - Jeong-Uk Huh (Superconductor Technologies Inc)  
15:31 --- Coffee Break ---
16:00
2IO1 - Industry Session - Superconductivity: From Industry to Society (until 18:00)
16:00 2IO1-01 Superconductivity: A Game Changer for the Industry of Energy - Prof. Carlo Rubbia (GSSI (Gran Sasso Science Institute))  
16:30 2IO1-02 Investing in Superconductivity: The Industry of Science - Frank Laukien (Bruker Corporation)  
17:00 2IO1-03 Investing in Superconductivity: The Electronics Challenge - John Levy (Hypres Inc)  
17:30 2IO1-04 Investing in Superconductivity: Large Scale Endeavours - Jean Luc Lancelot (Sigmaphi)  
18:30
Outreach event F. Gianotti (until 20:00)
12:15 --- Lunch break ---
13:30
Poster : 3EP1 - Microwave devices and SQUID application (until 15:30)
13:30 3EP1-01 Josephson parametric amplifiers based on quadratic nonlinearity of rf SQUIDs operating at 4.2 K - Marat Khabipov (Physikalisch-Technische Bundesanstalt)  
13:31 3EP1-03 Utilizing HTS Resonators as NMR Transmit Coils - William Brey (Florida State University - NHMFL)  
13:32 3EP1-04 Analysis of characteristics of Al MKID resonators - Takashi Noguchi (National Astronomical Observatory)  
13:33 3EP1-05 A RF test vehicle for superconductor electronics interconnect - Vladimir Talanov (Northrop Grumman Corp.)  
13:34 3EP1-06 Study of Impedance Optimization between Modelling and Measurement of a Ka-band HTS MMIC Josephson Mixer - Ting Zhang (University of Technology Sydney)  
13:35 3EP1-07 Trimming Mechanism of External Quality Factor in HTS Bandpass Filter using Bulk Resonator - Atsushi Saito (Yamagata University)  
13:36 3EP1-08 Coupled superconducting resonators for tunneling-defect studies and qubit applications - Bahman Sarabi (University of Maryland - College Park)  
13:37 3EP1-09 Development of near infrared and visible Kinetic Inductance Detectors (KIDs) for astronomy - Samir Beldi (GEPI, Observatoire de Paris, PSL Research University, CNRS)  
13:38 3EP1-10 Two Dimensional Scanning of Intermodulation Distortion in Superconducting Resonators - Stephen Remillard (Hope College Physics Department)  
13:39 3EP1-11 Long period of time cooling technique using liquid nitrogen for HTS-SQUID systems - Tsunehiro Hato (Superconducting sensing technology research association)  
13:40 3EP1-12 Miniaturized Multi-Band HTS Bandpass Filter Design Using Single Perturbed Multimode Resonator with Multi-Transmission Zeros - Jiaming Tang (Xiamen University)  
13:41 3EP1-13 Compact Quad-Channel High Temperature Superconducting Diplexer Based on Stub-Loaded Square Ring Resonators - Ping Gui (East China Jiaotong University)  
13:42 3EP1-14 Design of Transmitting Filter using Cascaded Quadruplet Superconducting Bulk Resonator - Takafumi Saito (Yamagata University)  
13:43 3EP1-15 HTS dual-band bandpass filter with independently tunable center frequencies - Naoto Sekiya (University of Yamanashi)  
13:44 3EP1-17 Recently Developed Microwave Devices Based On High-TC Superconducting Films - Liang Sun (O.Usikov IRE NAS of Ukraine)  
13:45 3EP1-18 Terahertz Radiation above 1 THz from intrinsic Josephson stack fabricated by acid modification process - Takahiro Kato (Nagaoka University of Technology)  
13:46 3EP1-19 Design of compact and high pole HTS tri-band bandpass filters using a new feeding structure - Takahiro Unno (Japan)  
13:47 3EP1-20 Design and Fabrication of HTS Pick-up Coil for Field-Swept Solid-State NMR - Atsushi Saito (Yamagata University)  
13:48 3EP1-21 Voltage Oscillations with Magnetic Flux in Thermally Hysteretic Nano-SQUIDs Based on Superconducting Weak Link - Sourav Biswas (Indian Institute of Technology (IIT) Kanpur)  
13:49 3EP1-22 Low-Loss Capacitively-Coupled Frequency Tuning and Impedance Matching Circuitry for HTS Based rf MRI Coils and Arrays - Jarek Wosik (Texas Center for Superconductivity at University of Houston and Electrical and Computer Engineering Department, University of Houston, Houston, TX 77204, USA)  
13:50 3EP1-23 Non-resonant microwave absorption in nano nickel added YBCO superconducting powders - Fhulufhelo Nemangwele (University of Venda)  
13:30
Poster : 3EP2 - Nano wire detectors and content information processing (until 15:30)
13:30 3EP2-01 Superconducting Single Photon Detector with the Capability of Photon-number Resolving and Photon Positioning - Xu Tao (Nanjing University)  
13:31 3EP2-02 High Sensitivity Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector - Yajun Chen (Nanjing University)  
13:32 3EP2-03 Local and geometric timing jitter in superconducting nanowire single-photon detectors - Alexej Semenov (DLR Institute of optical systems)  
13:33 3EP2-05 Comparison of superconducting nanowire single photon detectors made of NbTiN and NbN thin films - Xiaoyan Yang (Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS))  
13:34 3EP2-06 Internal boundary conditions for elastic fluxon scattering at circuit interfaces - Waltraut Wustmann (Laboratory for Physical Sciences, USA)  
13:35 3EP2-08 Current dependence of the hot-spot response spectrum of superconducting single-photon detectors with different layouts - Ilya Charaev (Karlsruhe Institute of Technology (KIT))  
13:36 3EP2-09 Uniformity Analysis of Nanowires with Elemental Imaging - Xiaoqing Jia (Research Institute of Superconductor Electronics (RISE), School of Electronic Science and Engineering, Nanjing University)  
13:37 3EP2-10 Quasi-gated source for superconducting nanowire single-photon detector - Xiaoqing Jia (Research Institute of Superconductor Electronics of Nanjing University)  
13:38 3EP2-11 Free-Space-Coupled Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector - Yajun Chen (Nanjing University)  
13:39 3EP2-12 Superconducting components for quantum-information processing - Elena Zhitlukhina (Donetsk Institute for Physics and Engineering, NANU)  
13:40 3EP2-13 Superconducting nanowire avalanche photodetector made of amorphous molybdenum silicide material - Misael Caloz (University of Geneva, GAP)  
13:41 3EP2-14 Kinetic Inductance of Ultra-thin Magnesium Diboride Nanowires - Thomas Melbourne (Temple University)  
13:42 3EP2-15 Ultrafast photon-number-resolving detectors for NIR operating at 4.2 K - Ekkehart Schmidt (Institute of Micro- und Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology)  
13:43 3EP2-16 One-dimensional p-wave superconductor toy-model for Majorana fermions in multiband semiconductor nanowires - Durval Rodrigues Jr. (University of São Paulo - Lorena Engineering School)  
13:44 3EP2-17 Read-out Circuit Based on SFQ Logic Circuit for Photon-Number-Resolving SNSPD Array - Hiroaki Myoren (Saitama University)  
13:45 3EP2-18 Fast and high efficiency superconducting nanowire single photon detector at 630 nm - Heqing Wang (Shanghai Institute of Microsystem and Information Technology (SIMIT))  
13:30
Poster : 3LP1 - Fusion Magnets and Cables (until 15:30)
13:30 3LP1-01 High current densities in round HTS CrossConductors of more than 500 A/mm² at 4.2 K, 12 T - Michael J. Wolf (KIT)  
13:31 3LP1-02 Experimental study on Bi-2212 CIC conductor - Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)  
13:32 3LP1-03 Re-examination of refrigeration power of the LHD cryogenic system after 18 years of operation - Toshiyuki Mito (National Institute for Fusion Science)  
13:33 3LP1-05 Thermal-hydraulic characterization of the ITER Toroidal Field Insert coil - Alberto Brighenti (Politecnico di Torino)  
13:34 3LP1-06 Multi-Tape Stack High Current Cable for No-Insulation HTS Fusion Magnet - Seungyong Hahn (Seoul National University)  
13:35 3LP1-08 Secondary Phases Quantification And Fracture Toughness At Cryogenic Temperature Of Austenitic Stainless Steel Welds For High Field Superconducting Magnets - Ignacio Aviles (CERN / Universidad Carlos III de Madrid)  
13:36 3LP1-10 NDT Status Of PF-1 Coil Welds - Igor Sokolov (NIIEFA)  
13:37 3LP1-11 Mechanical analysis of the ENEA TF coil proposal for the EU DEMO fusion reactor - Francesco Giorgetti (University of Rome Tor Vergata)  
13:38 3LP1-12 Performance analysis of the first PF coils design for the EU DEMO fusion reactor - Andrea Zappatore (Politecnico di Torino)  
13:39 3LP1-13 Winding & Forming Technology Development for CFETR Central Solenoid Model Coil - Houxiang Han (Institute of Plasma Physics Chinese Academy of Sciences)  
13:40 3LP1-14 Experimental study of steady-state transverse heat transfer in a single channel CICC - Monika Lewandowska (West Pomeranian University of Technology, Szczecin)  
13:41 3LP1-15 R&D of the Helium Inlet for the CFETR Central Solenoid Model Coil - Aihua Xu (Institute of Plasma Physics Chinese Academy of Sciences)  
13:42 3LP1-16 Thermal-Hydraulic Analysis of the DEMO CS coil - Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)  
13:43 3LP1-17 Thermal-hydraulic test of the ENEA TF conductor sample for the EU DEMO fusion reactor - Roberto Bonifetto (Politecnico di Torino)  
13:30
Poster : 3LP2 - No insulation / Smart insulation Coils (until 15:30)
13:30 3LP2-01 Investigation on two techniques for the reduction of screening current-induced field effects in ReBCO HTS coils - Guillaume Dilasser (CEA Saclay)  
13:31 3LP2-03 Thermal Quench Behaviors of 2G HTS Tape Samples with Polyimide Insulation and Smart Insulation Materials - Chang Ju Hyeon (Jeju national university)  
13:32 3LP2-04 Analysis of Dynamic Stress/Strain Distributions in a 10 T non-insulated GdBCO HTS Coil During Energization - Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:33 3LP2-05 An adjustment method for turn-to-turn electrical contact resistance in No-Insulation REBCO coil: Multi-Layer Metal-Insulation method - Satoka Yashiro (Waseda University)  
13:34 3LP2-06 Simulation of electrical and thermal behavior of no-insulation REBCO pancake coil with multiple defects - Qiyi Zheng (Waseda University)  
13:35 3LP2-07 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system - Yawei Wang (University of Bath)  
13:36 3LP2-08 Investigation of Characteristics of No-Insulation Coil Considering the Influence of Stress Distribution on the Turn-to-Turn Contact Resistivity - Guofeng Zhang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)  
13:37 3LP2-09 Development of superconducting joints between Bi-2212/Ag wires - Susannah Speller (University of Oxford, United Kingdom)  
13:38 3LP2-11 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system - Yawei Wang (University of Bath)  
13:30
Poster : 3LP3 - HTS Magnets & Cables Modeling (until 15:30)
13:30 3LP3-01 Innovative Electro-Thermal Modeling of Quench in REBCO Roebel Cables and Coils. - Lorenzo Cavallucci (Department of Electrical, Electronic and Information Engineering, University of Bologna, Italy)  
13:31 3LP3-02 Study of a superconducting magnetic diverter for the ATHENA X-RAY Space Telescope - Nicolò Riva (EPFL)  
13:32 3LP3-03 An Electromagnetic Analysis of REBCO Cable Configurations - Luca Bottura (CERN)  
13:33 3LP3-04 Simulation and analysis of an (RE)BCO tape stack magnet under the pulsed field magnetization - Wenjiang Yang (Beihang University)  
13:34 3LP3-05 A 3D T-A model for the stacks of second generation high temperature superconductor - Jie Sheng (University of Bath)  
13:35 3LP3-06 Influence of physical properties of a Coil Bobbin on Transient Thermal Stress in a REBCO Pancake-coil - Daisuke Miyagi (Tohoku University)  
13:36 3LP3-08 Parametric Evaluation of Pressure Drop and Heat Transfer with Nano Cryogenic Fluid in HTS cables - Priyanka Anand (Lovely Professional University)  
13:37 3LP3-10 Electromagnetic Parameter Analysis of YBCO Superconducting Cables With High Current for HTS Power Devices - Shanshan Fu (China Electric Power Research Institute)  
13:38 3LP3-11 Influence of the magnetization features of the HTS tape on the magnetic field homogeneity inside the superconducting unclosed shield - Evgeny Kulikov (Joint Institute for Nuclear Research)  
13:39 3LP3-14 Design of MgB2 superconducting joint using pressure-dependent finite element model - Seong-Hoon Kang (Korea Institute of Materials Science)  
13:40 3LP3-15 Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms - Timing Qu (Department of Mechanical Engineering, Tsinghua University)  
13:41 3LP3-16 Shielding-current-induced fields in coils with various shapes wound with striated coated conductors - Yudai Mizobata (Kyoto University)  
13:42 3LP3-17 Screening currents within the Eucard HTS insert - Philippe Fazilleau (cea)  
13:43 3LP3-18 A 3-D Numerical Model of Critical Current in Twist Stacked Tape Cable - Donghui Liu (Lanzhou University)  
13:44 3LP3-19 HTS coil model for critical current calculation, quench behavior and comparison with wound sample experiment - Tara Benkel (CNRS - LNCMI)  
13:45 3LP3-20 A 3D T-A model for the stacks of second generation high temperature superconductor - Jie Sheng (University of Bath)  
13:30
Poster : 3LP4 - Magnet Design and Quench (until 15:30)
13:30 3LP4-02 Magnetic Design for the Superferric Multipole Magnets of the Super-FRS - Hans Mueller (GSI Helmholtzzentrum für Schwerionenforschung GmbH)  
13:31 3LP4-03 Force acting on a magnetic cloak placed in magnetic field - Mykola Soloviov (IEE SAS)  
13:32 3LP4-04 Analytical Modeling of an Inductor ina Magnetic Circuit for Pulsed Field Magnetization of HTS Bulk - Mohamed Elbaa (GREEN - University of Lorraine & LESI - University of Khemis Miliana)  
13:33 3LP4-05 Capacity Allocation and Electromagnetic Optimization of SMES in Micro Grid - Xiao Zhou (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (R&D Center of Applied Superconductivity), Huazhong University of Science and Technology)  
13:34 3LP4-06 A Compact Electromagnet with High-Tc Superconducting REBaCuO Tapes - Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors, Shanghai University)  
13:35 3LP4-07 Improvement of Magnetic Field Homogeneity from the HTS Joint-less Coil - Seyeon Lee (Korea Polytechnic University)  
13:36 3LP4-09 A 30kA IGBT based energy extraction system for the High Luminosity LHC magnet test facilities - Gert Jan Coelingh (CERN)  
13:37 3LP4-10 Over-Current Characteristics of Roebel Cable Sample With 2G YBCO Coated Conductor - Panpan Chen (China Electric Power Research Institute)  
13:38 3LP4-11 Study on hot spot temperature limits for epoxy-impregnated coil wound of Bi/Ag sheathed wire to be safe from damages caused by quenches - Ryuta Matsuo (Sophia University)  
13:39 3LP4-12 Experimental study on method to suppress hot spot temperature of HTS coil by quick transfer of current of quenching coil - Ryuta Matsuo (Sophia University)  
13:40 3LP4-13 Evaluation of　Strain Tolerance to the Superconducting Magnet Quenching by the 3-point Bending Test Stand - Manabu Aoki (Hitachi.Ltd. Research & Developing Group)  
13:41 3LP4-14 Quench protection of the central solenoid model coil for the CFETR - Yuanyuan Ma (Institute of Plasma Physics Chinese Academy of Sciences)  
13:42 3LP4-15 Safety valve system for JT-60SA superconducting coils - Kyohei Natsume (National Institute for Quantum and Radiological Science and Technology)  
13:43 3LP4-16 Analysis of Voltage Noises for the Reliability Improvement of the KSTAR CS Quench Detection - Geonwoo Baek (Yonsei University)  
13:44 3LP4-17 Development of a digital quench detection system for Nb3Sn magnets and first measurements on prototype magnets - Jens Steckert (CERN)  
13:45 3LP4-19 Experiments to Validate New Method to Diagnose Soundness of The High Temperature Superconducting Coils by Pick-up Coil Pairs - Akifumi Kawagoe (Kagoshima University)  
13:46 3LP4-20 50 kV Fail-Safe Quench Detection System for Large Superconductor Magnets - Walter H. Fietz (Karlsruhe Institute of Technology (KIT))  
13:47 3LP4-21 Partial isolation quench protection method for YBCO SMES magnet - Qixing Sun (university of bath)  
13:48 3LP4-22 Protection Strategy for HTS Coils in DC Electric Power Network - Miyeon Yoon (Korea Polytechnic University)  
13:49 3LP4-23 Quench detection utilizing stray capacitances - Emmanuele Ravaioli (LBNL)  
13:50 3LP4-24 Coil Development and Coupling-Loss Induced Quench Protection of Bi-2212 Magnets - Daniel S. Davis (FSU-NHMFL)  
13:30
Poster : 3LP5 - Levitation, transportation and propulsion (until 15:30)
13:30 3LP5-01 Comparison of levitation forces between a permanent and a switchable magnetic track of the SupraTrans2 levitation system - Tilo Espenhahn (IFW Dresden)  
13:31 3LP5-02 Mechanical vibration test of a REBCO coil designed for application to the maglev - Katsutoshi Mizuno (Railway Technical Research Institute)  
13:32 3LP5-04 Research on HTS magnetic levitation bearing for submerged cryogenic disk motor-pump - Liwang Ai (Institute of Electrical Engineering,Chinese Academy of Sciences;University of Chinese Academy of Sciences)  
13:33 3LP5-05 Ripple field effects on the no-insulation rotor windings of high temperature superconductor machines used in all electrical aircraft. - Yawei Wang (University of Bath)  
13:34 3LP5-06 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft - Yawei Wang (University of Bath)  
13:35 3LP5-07 Study of magnetic stiffness and effect on running stability in high speed train propelled by superconducting linear synchronous motor - Jinho Lee (Korea Railroad Research Institute)  
13:36 3LP5-08 The Critic Liquid-gas Phase Transition between Liquid Nitrogen and YBCO HTS bulks: from FEM Modeling to Its Experimental Study for ZFC Levitation Devices - Paulo Branco (IDMEC - Prof. Paulo Branco)  
13:37 3LP5-10 Numerical modelling of Superconducting network in an All-Electric Aircraft - Sriharsha Venuturumilli (University of Bath)  
13:38 3LP5-11 Wireless Power Charging Characteristics between Copper Antenna and HTS Receiver Module under Strong Levitation Field in Superconducting MAGLEV Train - Je Yull Lee (Suwon Science College)  
13:39 3LP5-12 Analysis of the motion of a body in the linear HTS suspension along a curvilinear trajectory - Pavel Kurbatov (National Research University "Moscow Power Engineering Institute")  
13:40 3LP5-17 An Electromagnetic Turnout of Halbach-type PMG for Superconducting Maglev - Yanxing Li (Southwest Jiaotong University)  
13:41 3LP5-18 Analysis of conducted emissions in high power superconducting electrical propulsion system - Xiaojian Li (china north vehicle research institute)  
13:42 3LP5-19 A Design Method of HTS Bulks Array for Decreasing Rotation Loss in a Superconducting Maglev Micro-thrust Stand - Ye Mao (Beihang University)  
13:30
Poster : 3LP6 - SMES and Combined devices (until 15:30)
13:30 3LP6-01 Influences of Flux Diverter on Critical Current and Energy Storage Capacity of Mini-Size SMES Magnet Wound by 100-Meter-Class GdBCO Tape - Jian-Xun Jin (Tianjin University)  
13:31 3LP6-03 Development and experimental investigation of a pancake coil consisted of high temperature composite superconductor with spiral cooling channel - Jiahui Zhu (China Electric Power Research Institute)  
13:32 3LP6-04 Test in strong background field of the first modular element of a REBCO 1MJ high energy density SMES - Jeremie Ciceron (CNRS - Institut Néel)  
13:33 3LP6-05 Research on the Application of Superconducting Magnetic Energy Storage in Microgrid System for Smoothing Power Fluctuation Caused by Operation Modes Switching - Ying Xu (Huazhong University of Science and Technology)  
13:34 3LP6-06 Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet - Timing Qu (Tsinghua University)  
13:35 3LP6-07 Thermal Analysis of Superconducting Magnetic Energy Storage Sytems Using Finite Elements Mehod - Serhat Tunc (Istanbul University Department of Physics)  
13:36 3LP6-09 Conceptual Design and Evaluation of a MW-Class SMES-BES DVR System - Zixuan Zheng (Sichuan University)  
13:37 3LP6-11 A method for quench detection in inductive superconducting fault current limiters of transformer type - Joao Murta-Pina (Centre of Technology and Systems (Uninova))  
13:38 3LP6-12 AC-Loss Measurements and Detailed Loss Analysis on a 1MVA-Class Superconducting Fault Current Limiting Transformer - Sebastian Hellmann (Karlsruhe Institute of Technology)  
13:39 3LP6-13 Field test of a 1MVA/1MJ Superconducting Fault Current Limiter-Magnetic Energy Storage System - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:40 3LP6-14 2.5 kVA Single- Phase Self-Limiting Transformer Using Magnetic Flux Transfer - Ercan Ertekin (Ankara University)  
13:41 3LP6-15 Current Limiting Characteristics using Double Quench of Transformer Type SFCL with Additional Secondary Winding - Sung-Hun Lim (Soongsil University)  
13:42 3LP6-16 Design and Evaluation of SMES-Battery Energy Storage System for Smoothing Mode Transfer of a Micro-Grid between Grid-Connected and Islanded Conditions - Lei Chen (Wuhan University)  
13:30
Poster : 3LP7 - Power transmission and cables (until 15:30)
13:30 3LP7-01 Design Optimization of a Superconducting Gas-Insulated Transmission Line - Sastry Pamidi (Center for Advanced Power Systems)  
13:31 3LP7-02 Influence of cabling on current carrying properties of MgB2 superconductors - Sergey Fetisov (Russian Scientific R&D Cable Institute)  
13:32 3LP7-03 Technology Collaboration Program on High Temperature Superconductivity (HTS): how HTS applications may influence international standardization activity - Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)  
13:33 3LP7-04 Advances in the First Brazilian Project on HTS Power Cable - Marcelo Neves (LMDS / UFRRJ (Federal Rural University of Rio de Janeiro))  
13:34 3LP7-05 Computational simulation of thermal behavior of a Cold Dielectric HTS Power Cable - Edson da Silva (LMDS/Physics Department/UFRRJ)  
13:35 3LP7-06 Efficient numerical modelling of superconducting power cables – A comparative study between 2D and 3D numerical models - Min Yao (Institute of Energy System, School of Engineering, the University of Edinburgh)  
13:36 3LP7-07 Simulation and test of the compact 2G HTS power cable model - Sergey Fetisov (Russian Scientific R&D Cable Institute)  
13:37 3LP7-08 Fault Current Investigations of a concentric three-phase HTS Cable connected to a SFCL Device - Wescley Tiago Batista de Sousa (Karlsruher Institut für Technologie / Institut für Technische Physik)  
13:38 3LP7-09 A 3D quench model for high temperature superconductor CORC cable based T-A formulation - Zixuan Zhu (University of Bath)  
13:39 3LP7-10 Design Comparisons of concentric three-phase HTS Cables - Dustin Kottonau (Karlsruhe Institute of Technology / Institute for Technical Physics)  
13:40 3LP7-11 Short circuit test results of 22kV HTS triaxial superconducting bus - Kazuhisa Adachi (SWCC showa cable systems co., ltd)  
13:41 3LP7-12 Comparative Analysis of Finite Element Method and Volume Element Method for Thermal Modeling of Superconducting DC Transmission Systems - Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)  
13:42 3LP7-13 The Model Development and Power System Analysis of HVDC system in Jeju Island with DC 80kV HTS - Eunyoung Ko (Korea Electrotechnology Research Institute)  
13:43 3LP7-15 Multi-Terminal DC Transmission Systems based on Superconducting Cables Feasibility Study, Modeling and Control - Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)  
13:44 3LP7-16 Comparisons between Simulations and Experimental Results of 66kV 40m model HTS Power Cable in Short-circuit Current Accidents - Daichi Horita (WASEDA University)  
13:45 3LP7-18 System Apparatus And Methods For A 4k (Stochastic) Superduct - Charles Janeke (Constellation Dynamics LLC)  
13:46 3LP7-19 UK’s 1st feasibility study of using superconducting cables in electricity distribution networks - Weijia Yuan (University of Bath)  
13:47 3LP7-20 3-D Numerical Modelling of AC losses in MgB2 wires for the 10 kA demonstrator of BEST PATHS - Guillaume Escamez (NEXANS/SuperGRID)  
13:48 3LP7-21 Safety verification of 275kV HTS Cable System in Short-current Accidents - Yusuke Yokoo (Waseda University)  
13:49 3LP7-24 A new proposal of Terminations for HTS Power Cables - Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))  
13:50 3LP7-26 Electro-mechanical performance of 18-strand MgB2 cables for the Superconducting Link Project at CERN - Konstantina Konstantopoulou (CERN)  
13:51 3LP7-27 Development of MgB2 cable conductors for very high power HVDC transmission within the Best Paths project - Christian-eric Bruzek (Nexans France)  
13:52 3LP7-28 Effective pumping of long HTS power transmission line insulated with heat radiation shield - Yury Ivanov (Chubu University)  
13:53 3LP7-29 Suitable cable structure of HTS tri-axial cable cooled by counter flow cooling method for long-distance power transmission - Daisuke Miyagi (Tohoku University)  
13:54 3LP7-30 An Improved Starting Strategy for a Spherical Superconducting Rotor - Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)  
13:55 3LP7-31 World first commercial project for applying superconducting cable system in Korea - Cheolhwi Ryu (LS Cable&System Ltd.)  
13:30
Poster : 3MP1 - Flux Pinning Cuprates (until 15:30)
13:30 3MP1-02 Flux pinning in REBCO-based coated conductors probed by correlation of Jc and N-value - Mayraluna Lao (Karlsruhe Institute of Technology)  
13:31 3MP1-03 Influence of antidots on transport characteristics of HTSC - Anna Moroz (National Research Nuclear University MEPhI)  
13:32 3MP1-04 Pinning, dissipation and anisotropy in nanostructured YBa2Cu3O7-x from microwave measurements. - Enrico Silva (Universita` Roma Tre)  
13:33 3MP1-05 Tunable pinning effects produced by non-uniform antidot arrays in YBCO thin films - Antony Jones (Commonwealth Scientific and Industrial Research Organisation)  
13:34 3MP1-06 Investigation of the longitudinal magnetic field effect in REBa2Cu3Oy films with various particulate artificial pinning centers - Kazuki Sugihara (Nagoya University)  
13:35 3MP1-07 Analysis of properties of 2G HTS tapes operating under DC magnetic field generated by permanent magnets - Krzysztof Habelok (Silesian University of Technology)  
13:36 3MP1-08 Vortex Dynamics in SmBa2Cu3Oy Films with BaHfO3 Nanorods as Correlated Artificial Pinning Centers - Yuji Tsuchiya (Nagoya Univ.)  
13:37 3MP1-09 Physical Properties of Nanostructured, Liquid Assisted Grown, Epitaxial YBa2Cu3O7-x Superconducting Films - Juri Banchewski (Institut de Ciència de Materials de Barcelona (ICMAB-CSIC))  
13:38 3MP1-10 The post-annealing effect of GdBa2Cu3O7-δ coated conductors on the pinning properties via a RCE-DR process - Insung Park (Seoul National University)  
13:39 3MP1-11 "Is Surface Decoration The New Black?" A Comparison Between Surface Decoration And Artificial Pinning Centers - Achille Angrisani Armenio (ENEA)  
13:40 3MP1-13 The effect of Nd2O3 addition on the magnetic properties of bulk single grain YBCO synthesized by Top Seeded Infiltration and Growth - Talal A. Aljohani (Excellence Centre for Advanced Materials and Manufacturing, King Abdulaziz City for Science and Technology (KACST))  
13:41 3MP1-14 Universal Scaling Of The Self-Field Critical Current From Single-Atomic Layer To Millimetre-Scale Superconductors - Evgeny Talantsev (Victoria University of Wellington)  
13:42 3MP1-15 YBa2Cu3O7-x nanocomposite films by CSD-ultrafast Transient Liquid Assisted Growth - Júlia Jareño Cerulla (Institut de Ciències dels Materials de Barcelona (ICMAB-CSIC))  
13:43 3MP1-18 The High-Field, Strain Dependence of the Critical Current in GdBa2Cu3O7-x SuNAM Coated Conductors for Fusion Applications - Jack Greenwood (University of Durham, Department of Physics)  
13:44 3MP1-19 Influence of growth temperature and oxygen pressure on transport properties of BHO-doped REBCO(RE=Gd, Y) superconducting thin films - Ruslan Popov (KIT)  
13:45 3MP1-20 Critical Current And Vortex Flux Pinning Properties in YBa2Cu3O7-x Films with Ba2YTaO6 + Ba2YNbO6 Nano-inclusions By DC Transport And Microwave Measurements - Anna Frolova (Roma Tre University)  
13:46 3MP1-21 Influence of micron range artificial defects on critical current of 2G HTS tapes - Sergei Pokrovskii (NRNU MEPHI)  
13:47 3MP1-22 Critical current anisotropy in commercial coated conductors at higher temperatures - Eugen Seiler (Institute of Electrical Engineering)  
13:30
Poster : 3MP2 - Non-Cuprate Thin Films (until 15:30)
13:30 3MP2-02 EBSD analysis of surface texture quality of oxide thin films in coated conductors - Yue Zhao (Shanghai Jiao Tong University)  
13:31 3MP2-03 Epitaxial (001) SrTiO3 films on Cu-based substrates by PLD under reducing atmosphere for YBCO Coated Conductor - Elena Xuriguera (Universitat de Barcelona)  
13:32 3MP2-05 Surface Flashover Characteristics of PPLP According to Its Orientation in Cryogenic Environment - Jin-Yong Na (Hanyang university)  
13:33 3MP2-06 Comparison of AC and DC Breakdown Characteristics of PPLP in LN2 Considering Corona Inception Voltage - Ryul Hwang (Hanyang university)  
13:34 3MP2-07 Synthesis of superconductive TaN films using DC reactive sputtering deposition - Amanda Nieto (CENTRO DE INVESTIGACION CIENTIFICA Y DE EDUCACION SUPERIOR DE ENSENADA, BAJA CALIFORNIA)  
13:35 3MP2-08 Influence of surface faceting of RABiT-type metallic substrate on epitaxial film growth - Giuseppe Celentano (ENEA)  
13:36 3MP2-09 Growth of biaxially-textured La2Zr2O7 and Zr-doped CeO2 on cold-rolled Ni-W substrate by CSD - Angelo Vannozzi (ENEA)  
13:37 3MP2-10 Influence of the inhomogeneous properties of a superconducting film on the penetration of the magnetic flux - Loïc Burger (Department of Electricity, Electronics, and Computer Science of the University of Liège)  
13:38 3MP2-11 Effect of homoepitaxial MgO films on the growth of CeO2 films by pulsed laser deposition - Wei Wang (School of Physics and Astronomy, Shanghai Jiao Tong University)  
13:39 3MP2-12 Preparation and characterization of Bi2Se3 films grown on FeSe2 by pulsed laser deposition - Ming Lei (Southwest Jiaotong University)  
13:40 3MP2-14 Topological quantum phase transition and superconductivity induced by pressure in the bismuth tellurohalide BiTeI - Yanpeng Qi (Max Planck Institute for Chemical Physics of Solids)  
13:41 3MP2-16 Novel Platinum-Based Superconductor LaPt5As with Unique Crystal Structure - Masaya Fujioka (University of Hokkaido)  
13:42 3MP2-17 Research on Electrical Performance of Impregnating Resin Material for Superconducting Magnet - Yanfang Yang (China Electric Power Research Institute)  
13:43 3MP2-18 Thermal conductivity AlN/epoxy composites for superconducting magnets - Teng Zhang (Beijing Jiaotong University)  
13:44 3MP2-19 Electromagnetic characterization of a new dielectric for High-Tc Power Cable - Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))  
13:45 3MP2-20 Application of metamaterial nano-engineering for increasing the superconducting critical temperature - Michael Osofsky (Materials Science and Technology Division, Naval Research Laboratory)  
13:46 3MP2-21 Electron-beam evaporated superconducting titanium thin films for antenna coupled transition edge sensors - Zheng Wang (Purple Mountain Observatory, Chinese Academy of Sciences)  
13:30
Poster : 3MP3 - Cuprate Bulk (until 15:30)
13:30 3MP3-01 Influence of doping on electrical and thermal properties of Dy0.95Pr0.05Ba2Cu2.94M0.06O7-δ (M = Fe, Ni, Zn and Mn) - Ashok Rao (Manipal Institute of Technology, Manipal University)  
13:31 3MP3-02 Batch processing of single-domain YBCO bulks with artificial holes - Tomáš Hlásek (CAN SUPERCONDUCTORS s.r.o.)  
13:32 3MP3-03 GdBCO single grain bulk superconductor via 2-step top seeded infiltration and growth process - Devendra Kumar Namburi (UNIVERSITY OF CAMBRIDGE)  
13:33 3MP3-04 Effects of Cu substitution for Nb in NbSr2RECu2Oz (z~8; RE: rare-earth element) - Toshihiko Maeda (Kochi University of Technology)  
13:34 3MP3-06 Effect of AuBr3 Doping on the Superconducting Properties of Hg-based Superconductors - Ioseb Metskhvarishvili (Ilia Vekua Sukhumi Institute of Physics and Technology, Laboratory of Cryogenic Technique and Technologies)  
13:35 3MP3-07 Production of polycrystalline superconducting ceramic nanowires, using the Solution Blow Spinning technique - Rafael Zadorosny (UNESP - Ilha Solteira)  
13:36 3MP3-08 Microstructure of IG-processed YBCO - Michael Koblischka (Saarland University)  
13:37 3MP3-09 Raman Characterisation of Melt-Textured Gd1212 Superconductors in the Normal State. - Marcello Gombos (CNR-IMM UoS Napoli)  
13:38 3MP3-10 Influence of CeO2, La2O3 and Sm2O3 additions on the Microstructure and Properties of YBCO Bulk Superconductors Prepared by TSIG Process - Liudmila Vojtkova (Institute of Experimental Physics, Slovak Academy of Sciences)  
13:39 3MP3-11 Addressing the challenge of bar shaped bulk REBCO superconductors - Yunhua Shi (Engineering Department, University of Cambridge)  
13:40 3MP3-12 The Influence of Gd Addition on the Microstructure and Superconducting Properties of YBCO Bulk Superconductors - Daniela Volochová (Institute of Experimental Physics SAS)  
13:41 3MP3-13 Characterization of liquid phase on production of single grain bulk GdBa2Cu3Oy superconductors grown by IG process - Yuta Nakanishi (Shibaura Institute of Technology)  
13:42 3MP3-14 Influence of Sm Doping on YBCO Bulks in Y123/Y211 System - Monika Radušovská (Institute of Experimental Physics SAS)  
13:43 3MP3-15 YBCO bulk production via a novel preparation technique for applications - Ercan Ertekin (Ankara University)  
13:44 3MP3-16 Change of superconducting properties of single grain Sm-Ba-Cu-O bulk by Sm/Ba substitution effect - Petra Hajdová (Institute of Experimental Physics SAS)  
13:45 3MP3-17 Effect of Different Preperation Techniques and re-pelletization Procedure on the Structural, Mechanical and Superconducting Properties of BSCCO Superconductors - Hamit Öztürk (Ankara University 50. Year Campus)  
13:46 3MP3-18 Effect of Nd(422) Dopant on the Superconducting Properties of Nd(123) Superconductor Melt-processed in Air - Ahmed Mahmoud (Department of physics,Faculty of Science,University of Tripoli)  
13:47 3MP3-20 Laser induced circular texture in Bi-2212 bulk - Elena Martínez (ICMA (CSIC-University of Zaragoza))  
13:30
Poster : 3MP4 - Bi-Based wired and LTS Materials (until 15:30)
13:30 3MP4-01 Strong HTS wires based on the Bi2212 superconductor - Alexander Otto (Solid Material Solutions, LLC)  
13:31 3MP4-02 BOST progress on Bi-2212 round wire fabrication for high field magnet applications - Yibing Huang (Bruker-OST)  
13:32 3MP4-03 Overpressure densification of 2212 round wires before solenoid coil winding for higher winding pack stability and higher JW - Maxime Matras (CERN)  
13:33 3MP4-04 Investigation of inter-grain critical current density in Bi-2212 superconducting wires through Jc(B,T) measurements - Alessandro Leveratto (CNR-SPIN)  
13:34 3MP4-05 Axial tensile stress-strain characterization of Bi-2212 round wire with different heat treatment pressures - Jinggang Qin (Institute of Plasma Physics, CAS and ASIPP)  
13:35 3MP4-07 Experimental Investigation of Bi-2223/Ag Superconducting Tape Joints - Yuta Ebara (Sumitomo Heavy Industries, Ltd./ Engineering Physics Dept. / Technology Research Center)  
13:36 3MP4-09 Investigations on the enhancement of the critical current density in Nb3Sn superconductors by internally oxidized ZrO2 particles - Florin Buta (Universisty of Geneva, DQMP)  
13:37 3MP4-11 Growth Rate and Morphology of Nb3Sn Layers in ITER-type Bronze-Processed Wires under Different Diffusion Annealing Regimes - Evgeniya Valova-Zaharevskaya (M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences)  
13:38 3MP4-12 Effect of initial Nb billet conditions on the strain hardening of Nb filaments in Nb3Sn strand for FCC - Iksang Shin (KAT)  
13:39 3MP4-14 Microstructure and superconducting properties of bronze-processed Nb3Sn layer using Cu-Sn-In ternary matrix - Yoshimitsu Hishinuma (National Institute for Fusion Science)  
13:40 3MP4-15 A Study on the High Jc Nb3Sn Strand Manufacturing Process - Soobok Yoon (KAT)  
13:41 3MP4-16 Effect of Sn concentration in bronze matrix on the pre-reaction formation of Nb3Sn layers in bronze-processed superconducting strands of different design - Irina Deryagina (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS (IMP, UB RAS))  
13:42 3MP4-17 Lattice dynamics and compressibility on Nb3Sn at high pressure by a multitechnique approach - Rita Loria (Science Department, University Roma Tre, Rome, Italy)  
13:43 3MP4-18 Role of Ti on critical current density-dependent metallurgical aspects of A15-based superconductors by bronze method - Sangeeta Santra (University of Oxford)  
13:44 3MP4-19 Lead-free persistent mode joints between NbTi wires - Timothy Davies (Department of Materials, University of Oxford)  
13:45 3MP4-20 Ternary Molybdenum Chalcogenide superconducting wires for ultra-high field applications - Bernd Seeber (University of Geneva, now scMetrology SARL)  
13:46 3MP4-21 Effect of overpressure heat treatment on the microstructure and the current-carrying capacity of Bi-2212 wires - Qingbin Hao (Northwest Institute for Nonferrous Metal Research)  
13:30
Poster : 3MP5 - Magnetization and Trapped Field + AC Losses 2/2 (until 15:30)
13:30 3MP5-01 Model for the response of superconducting/ferromagnetic structures subjected to crossed fields - Benoit Vanderheyden (University of Liege)  
13:31 3MP5-02 Waveform control pulse magnetization for HTS bulk with flux jump - Tetsuya Ida (Tokyo University of Marine Science and Technology)  
13:32 3MP5-03 Creep and relaxation phenomena in a long MgB2 tube subjected to transversal magnetic field, at 4.2 K - Giovanni Giunchi (Materials Science Consultant)  
13:33 3MP5-04 Magnetic shielding properties of superconducting and superconducting/ferromagnetic superimposed systems - Laura Gozzellino (Politecnico di Torino, Department of Applied Science and Technology)  
13:34 3MP5-05 Magnetic shielding at 1 T: achievements of machinable MgB2 - Laura Gozzelino (University of Torino)  
13:35 3MP5-07 Flux jump assisted pulsed field magnetisation in a portable magnet system - Difan Zhou (University of Cambridge)  
13:36 3MP5-08 Three-dimensional modelling and experiments of cross-field demagnetization in cubic bulks - Milan Kapolka (Institute of Electrical Engineering, SAS)  
13:37 3MP5-09 Three-dimensional numerical modeling of a superconducting cube: benchmarking confirms non-rectangular current paths - Francesco Grilli (Slovak Academy of Sciences)  
13:38 3MP5-10 Pulse Magnetization of Jointless Superconducting Loops for Magnetic Bearings Height Control - Rubens de Andrade Junior (Federal University of Rio de Janeiro)  
13:39 3MP5-11 Dependence of the trapped magnetic flux density of YBCO pellets on mechanical stress - Bruno Douine (Universidad Nacional Autonoma de Mexico)  
13:40 3MP5-12 Demagnetisation study of pulse-field magnetised superconducting bulks - Jan Srpcic (University of Cambridge)  
13:41 3MP5-13 Modifying the Pulsed-Field-Magnetization Technique for HTS Bulks in Electrical machines and Without Magnetic Field Sensors - João Arnoud (Instituto Superior Técnico (IST) - University of Lisbon)  
13:42 3MP5-14 Inverse B-J models for determining current distributions in magnetised bulk superconductors - Fernando Perez (Bulk Superconductivity Group, Department of Engineering, University of Cambridge)  
13:43 3MP5-15 AC losses in MgB2 wires and tapes in frequencies up to 18 kHz - Yasha Nikulshin (Bar Ilan University)  
13:44 3MP5-16 Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet - Carlo Petrone (CERN)  
15:30 --- Coffee Break ---
15:50
3EO2 - Super conducting Photon Dectetors (until 18:05)
15:50 3EO2-01 Superconducting Nanowire Single-Photon Detector as a Key Element for Quantum Photonic Integrated Circuits - Gregory Goltsman (Moscow State Pedagogical University)  
16:05 3EO2-02 Bistable 10 nm thick YBa2Cu3O7-δ nanowires as new materials for single photon detectors - Riccardo Arpaia (Chalmers University of Technology)  
16:20 3EO2-03 Photoresponse of La1.85Sr0.15CuO4 nanostrip - Hiroyuki Shibata (Kitami Institute of Technology)  
16:35 3EO2-04 Optically probing the detection mechanism in a molybdenum silicide superconducting nanowire single-photon detector - Misael Caloz (Universite de Geneve (CH))  
16:50 3EO2-05 THz Heterodyne Detectors Based on MgB2 Thin Films - Boris Karasik (Jet Propulsion Laboratory)  
17:05 3EO2-06 Kinetic inductance bolometer arrays for security screening applicatoins - Juha Hassel (VTT Technical Research Centre of Finland)  
17:20 3EO2-07 SNSPD Array Based on MgF2 Substrate for Laser Ranging of Targets in Space - Labao Zhang (Research Institute of Superconductor Electronics of Nanjing University)  
17:35 3EO2-08 Realization of the Resonant Cold-Electron Bolometer (RCEB) with a Kinetic Inductance Nanofilter for Multichroic Pixels - Leonid Kuzmin (Chalmers University of Technology)  
15:50
3LO4 - Power Transmission Lines and Cables (until 18:05)
15:50 3LO4-01 Recent status and progress on the HTS applications of AC and DC power transmission - Minwon Park (Changwon National University)  
16:20 3LO4-02 The Supernet NL Project: The Netherlands High Voltage HTS Cable Project - Babak Gholizad (TenneT TSO)  
16:35 3LO4-03 The second cooling test of 1000-meter superconducting DC cable system in Ishikari - Noriko Chikumoto (Chubu University)  
16:50 3LO4-04 Protection against the ground fault for 275 kV HTS cable and the experiment - Tomohiro Takagi (Furukawa Electric co., ltd.)  
17:05 3LO4-05 Three years operation experience of the AmpaCity system installation in Essen, Germany - Jean-Maxime Saugrain (Nexans Deutschland GmbH)  
17:20 3LO4-06 Status of the MgB2-based high-power DC cable demonstrator within BEST PATHS - Christian-eric Bruzek (Nexans France)  
17:35 3LO4-07 3S – Superconducting DC-Busbar for High Current Applications - Steffen Elschner (University of Applied Science Mannheim)  
17:50 3LO4-08  
15:50
3MO3 - Cuprate Thin films (until 18:05)
15:50 3MO3-01 Surface diffusion constants and supersaturations in SmBCO films prepared by pulsed laser deposition method at various deposition conditions - Yusuke Ichino (Nagoya University)  
16:05 3MO3-02 Transport properties and granular properties relation in YBCO and composite YBCO films determined by means of synchrotron X-ray diffraction - Andrea Augieri (ENEA-FSN)  
16:20 3MO3-03 Mechanisms of novel transient liquid assisted growth for ultrafast production of YBa2Cu3O7-x thin films - Laia Soler Bru (Institut de Ciència de Materials de Barcelona (CSIC))  
16:35 3MO3-04 Preparation of superconducting GdBa2Cu3O7-x-BaHfO3 nanocomposite films by CSD with improved electrical performances - PABLO CAYADO (Karlsruhe Institute of Technology (KIT))  
16:50 3MO3-05 Influence of granularity on the local transport properties in pure and BaHfO3 doped YBCO films on technical templates - Ruben Hühne (IFW Dresden)  
17:05 3MO3-06 Ionic liquid gating of YBa_2Cu_3O_{7-x} grain boundaries - Alexandre Fête (University of Geneva - DQMP)  
17:20 3MO3-07 Study of Tl(1223) superconducting coatings for beam impedance mitigation in the Future Circular Collider - Dr Emilio Bellingeri (CNR-SPIN)  
17:35 3MO3-08 Development of a fluorine-free polymer-assisted-deposition route for YBa2Cu3O7-x superconducting films - Mircea Nasui (Technical University of Cluj-Napoca)  
17:50 3MO3-09 Control of Jc anisotropy in REBCO thin film with nanoscale Y211 inclusions - Alok K. Jha (Kyushu Institute of Technology)  
12:15 --- Lunch break ---
13:15
4EO1 - Digital and Quantum Processings (until 15:30)
13:15 4EO1-01 Recent research developments of adiabatic quantum-flux-parametron circuits technology toward energy-efficient high-performance computing - Yoshikawa Nobuyuki (Yokohama National University)  
13:45 4EO1-02 Theory and experimental analysis of the sensitivity of an adiabatic quantum flux parametron - Thomas Ortlepp (CIS Institut fuer Mikrosensorik GmbH (DE))  
14:00 4EO1-03 One- and Two-Bit Reversible Fluxon Logic Gates - Osborn Kevin (U. of Maryland, USA)  
14:15 4EO1-04 Coherent control of superconducting transmon qubits with an on-chip single flux quantum driver - Leonard Jr, Edward (University of Wisconsin - Madison)  
14:30 4EO1-05 Direct Detection of Single Flux Quantum Generated in Superconducting Strip Photon Detectors - Abe Yutaka (Yokohama National University)  
14:45 4EO1-06 Superconductor Electronics Fabrication Process with Self-Shunted Josephson Junctions and Kinetic Inductors - Tolpygo Sergey (MIT Lincoln Laboratory)  
15:00 4EO1-07 Energy-Efficient Dual-Port 32-word 8-bit ERSFQ Register File - Alex Kirichneko (HYPRES)  
15:15 4EO1-08 Progress on development of an rf waveform synthesizer with quantum-based accuracy - Manuel Castellanos Beltran (NIST)  
13:15
4LO2 - Large Scale: Accelerator Magnets (until 15:30)
13:15 4LO2-01 Progress and Status on LHC High Lumi project magnets - Ezio Todesco (CERN)  
13:45 4LO2-02 ReBCO 20T+ Dipoles for Particle Accelerators - Jeroen Van Nugteren (CERN)  
14:15 4LO2-03 16 T cosθ dipole for the Future Circular Collider (FCC) - BARBARA CAIFFI (INFN - National Institute for Nuclear Physics)  
14:30 4LO2-04 Advances in superconducting Bi-2212 conductor and accelerator magnet development - Tengming Shen (Fermilab)  
14:45 4LO2-05 Radiation Effects in Superconducting Quadrupoles for BigRIPS In-flight Separator at RIKEN - Kensuke Kusaka (RIKEN Nishina Center for Accelerator-Based Science)  
15:00 4LO2-06 First Operation of the Complete KATRIN Superconducting Magnet Chain - Woosik Gil (Karlsruhe Institute of Technology (KIT))  
15:15 4LO2-07 First experimental results on damage limits of superconducting accelerator magnet components due to instantaneous beam impact - Vivien Raginel  
13:15
4MO3 - Coated Conductor: Processing and Properties (until 15:30)
13:15 4MO3-01 European progress toward Nanostructure engineering in coated conductors - Anna Palau (Institut de Ciencia de Materials de Barcelona, ICMAB-CSIC)  
13:45 4MO3-02 Comparison of in-field transport Ic , Jc, and Fp for R&D and production ReBCO tapes - Dmytro Abraimov (NHMFL)  
14:00 4MO3-03 Thick secondary phase pinning-enhanced YBCO films on technical templates - Max Sieger (IFW Dresden)  
14:15 4MO3-04 Effective vortex-pinning features of YBa2Cu3O7-x films with self-assembled Ba2YTaO6/Ba2YNbO6 columnar defects, grown on ABAD-based metallic templates - Francesco Rizzo (ENEA)  
14:30 4MO3-05 Temperature dependence of flux pinning in REBCO coated conductors with artificial pinning centers - Prof. Kaname Matsumoto (Kyushu Institute of Technology)  
14:45 4MO3-06 Jointing Technique of Coated Conductors by Pastes Including Nano-sized Metal Particles - Takato Machi (National Institute of Advanced Industrial Science and Technology(AIST))  
15:00 4MO3-07 Long Coated Conductors with Uniform and High In-field Performance - Teruo Izumi (Advanced Industrial Science and Technology)  
15:15 4MO3-08 Chemical solution deposition growth of low fluorine thick coated conductors of YBa2Cu3O7 and YBa2Cu3O7 nanocomposites with preformed BZO nanoparticles - Cornelia Pop (Materials Science Institut of Barcelona (ICMAB-CSIC))  
15:30
4P1 - Plenary 4 (until 16:20)
15:30 4P1-01 Superconducting Computing: An Energy-Efficient Quantum-Based Technology For Supercomputers - Pascal Febvre (Université Savoie Mont Blanc)  
16:20
Closing (until 16:45)
Powered by Indico v3.3.7-pre