Focus on:  Hide Contributions
Back to Conference View
Login
Workshop on Nb3Sn Rutherford cable characterization for accelerator magnets

from Thursday, November 16, 2017 (5:15 PM) to Friday, November 17, 2017 (6:30 PM)
CIEMAT, Madrid

        : Sessions
    /     : Talks
        : Breaks
Nov 16, 2017
Nov 17, 2017
AM
8:30 AM
Mechanical characterization of impregnated conductor - Friedrich Lackner (CERN) Paolo Ferracin (CERN) (until 10:00 AM)
8:30 AM Mechanical tests setup in CEA Saclay - Maria Durante  
9:00 AM Measurement devices for 10 stacks mechanical characterization at room and 77K temperature - Michael Guinchard (CERN) Claudio Fichera (CERN)  
9:30 AM Mechanical behavior of MQXF cable stacks at room temperature - Claudio Fichera (CERN)  
10:00 AM --- Coffee break ---
10:30 AM
Mechanical characterization of impregnated conductor - Paolo Ferracin (CERN) Friedrich Lackner (CERN) (until 12:30 PM)
10:30 AM Mechanical characterisation of Nb3Sn impregnated coils – Compression properties - Jose Luis Rudeiros Fernandez (CERN)  
11:00 AM Uncertainties in the measurement of the mechanical properties of Nb3Sn coil constituents and cable stacks - Christian Scheuerlein (CERN)  
11:30 AM Mechanical simulation of MQXF coils - Giorgio Vallone (CERN)  
12:00 PM Measurements and modelling of mechanical properties of Nb3Sn strands and cables at FNAL - Emanuela Barzi (FNAL)  
PM
5:15 PM
Introduction - Pierre Manil (Université Paris-Saclay (FR)) (until 7:00 PM)
5:15 PM Introduction - Pierre Manil (Université Paris-Saclay (FR))  
5:30 PM Nb3Sn accelerator magnet development in US - Soren Prestemon (LBNL)  
6:00 PM Nb3Sn accelerator magnet development in Asia - Toru Ogitsu  
6:30 PM Nb3Sn accelerator magnet development in Europe - Gijs De Rijk (CERN)  
7:30 PM --- Workshop dinner ---
12:30 PM --- Lunch break ---
2:00 PM
Dimensional changes during heat treatment - Bernardo Bordini (CERN) Helene Felice (Université Paris-Saclay (FR)) (until 3:45 PM)
2:00 PM LBNL studies about dimensional changes during heat treatment - Soren Prestemon (LBNL)  
2:45 PM Measurement technique for longitudinal dimensional changes of Nb3Sn conductor due to the reaction heat treatment - Matthias Michels (CERN)  
3:15 PM Dimensional changes of Nb3Sn Rutherford cables during heat treatment - Etienne Rochepault (CERN)  
3:45 PM --- Coffee break ---
4:15 PM
Dimensional changes during heat treatment - Bernardo Bordini (CERN) Helene Felice (Université Paris-Saclay (FR)) (until 5:15 PM)
4:15 PM Cable insulation parameters and dimensional change in HQ, QXF, and TAMU3 - Eddie Holik (Fermilab)  
4:45 PM FRESCA2 and CEA set-up - Maria Durante  
5:15 PM
Wrap-up and close-out - Pierre Manil (Université Paris-Saclay (FR)) (until 6:30 PM)
5:15 PM Wrap-up - Pierre Manil (Université Paris-Saclay (FR))  
5:25 PM Summary Session 2 - Helene Felice (Université Paris-Saclay (FR)) Bernardo Bordini (CERN)  
5:50 PM Summary Session 3 - Paolo Ferracin (CERN) Friedrich Lackner (CERN)  
6:15 PM Close-out - Pierre Manil (Université Paris-Saclay (FR))