Name: 15th European Vacuum Conference (EVC-15)
Start: 2018-06-17T16:30:00+02:00
End: 2018-06-22T12:50:00+02:00
Location: No location set

60 Years of IUVSTA (in session "60 years IUVSTA")

"Devil's staircase" of phase transitions in the model of dimer adsorption: computational study of thermal stability (in session "Surface Science & Applied Surface Science")

A new calibration method and apparatus of vacuum mass spectrometer (in session "Poster Session Tuesday")

A novel growth method for ZnO nanorods by hydrothermal method applied rotating precursor solution (in session "Poster Session Wednesday")

A Novel vacuum gauge: Applications for Pressure Measurement, He-Leak detection and Residual Gas Analysis (in session "Vacuum Science & Technology")

A novel wide-range apparatus developed for performance testing of molecular pump (in session "Vacuum Science & Technology")

A theoretical study of Ni segregation through NiTi /tio2-x (in session "Poster Session Tuesday")

A unique QLED-OLED hybrid structure for white electroluminescent devices (in session "Poster Session Wednesday")

Adhesive bonding: applications and perspectives in UHV (in session "Vacuum Science & Technology")

Advancement in transient flow simulation: application to measurements of porous media permeability and tube conductance (in session "Vacuum Science & Technology")

Alumina ceramics vacuum chambers for injection magnets and their support configuration in the J-PARC RCS (in session "Poster Session Tuesday")

Amorphous Carbon Coatings for Vacuum Chambers of Particle Accelerators and Research on Secondary Electron Yield (in session "Poster Session Wednesday")

An analysing tool for analogue residual gas spectra in UHV implying machine-learning applications (in session "Vacuum Science & Technology")

Anomalous behavior of the magnetization at the surface of Fe3O4(100) (in session "Surface Science & Applied Surface Science")

Argon Cluster XPS Depth Profiling of Metal Oxide Thin Films (in session "Surface Science & Applied Surface Science")

ARIEL E-linac Vacuum System (in session "Poster Session Tuesday")

Atomic layer deposition of titanium oxide using cyclopentadienyl-type titanium precursors (in session "Poster Session Wednesday")

Bottom-up fabrication of atomically precise graphene nanoribbons (in session "Surface Science & Applied Surface Science")

Brittle film-induced cracking of ductile substrates (in session "Thin Films & Surface Engineering")

Calculation of activation temperature of TiZrV getter film (in session "Poster Session Wednesday")

Calibration and operation of total pressure gauges and residual gas analysers for UHV beamlines at CERN. (in session "Poster Session Tuesday")

Calibration of helium leak rate down to 10-14 Pa m3/s for leak testing of MEMS (in session "Vacuum Science & Technology")

Catalytic Performance of Coated Hollow Glass Microspheres (in session "Thin Films & Surface Engineering")

CERN experience: Vacuum design, interventions and operation in radioactive environment (in session "Vacuum in Accelerators")

Characteristics and Low Cost Application Perspectives of Atmospheric Plasma Chemical Vapor Deposition (in session "Plasma Science and Technology")

Characterization of Cu nanoparticles via X-ray photoelectron spectroscopy in combination with SESSA calculations (in session "Poster Session Wednesday")

Chemical and electronic imaging of energy and electronics materials important for basic science and industrial applications (in session "Plenary session")

Clarification of the relationship between electrical properties and the columnar structure of sputtered Al-doped zinc oxide films (in session "Poster Session Wednesday")

Cobaltosic oxide nanocrystals with exposed low-surface-energy planes anchored on chemically integrated graphitic carbon nitride-modified nitrogen-doped graphene: a high-performance anode material for lithium-ion batteries (in session "Poster Session Wednesday")

Combining NEG pump and an XHV BNNT cryopump (in session "Vacuum Science & Technology")

Compact getter pump with arc evaporator of Titanium (in session "Poster Session Wednesday")

Comparative Measurements of Ion Pump pumping speed according to ISO/DIS 3556 and DIN 28429 (in session "Vacuum Science & Technology")

Comparative Vacuum Simulations for a DLSR Upgrade of PETRA III (in session "Poster Session Tuesday")

Comprehensive Thin Film Analysis by Cross-sectional X-ray Nanodiffraction (in session "Thin Films & Surface Engineering")

Compressibility measurements of working liquid of the primary absolute pressure standard of Russia (in session "Poster Session Tuesday")

Computer simulation of pressure distribution and ion beam efficiency in accelerator vacuum chambers for designing vacuum system of cyclotron complexes (in session "Vacuum in Accelerators")

Conceptual consequences of the NewSI to the unit of pressure (in session "Vacuum Science & Technology")

Conceptual design of the FCC-ee vacuum and pumping system (in session "Poster Session Tuesday")

Conditioning methods to reduce ion-induced desorption (in session "Vacuum Science & Technology")

Controlled electronic properties of graphene via atomic layer deposition (in session "Poster Session Wednesday")

Controlling the Boron-to-Titanium Ratio in Magnetron-Sputter-Deposited TiBx Thin Films via Preferential Ionization of Sputter-Ejected Ti (in session "Thin Films & Surface Engineering")

Coordination self-assembly of terephthalic acid molecules and Fe on Cu(100) surface: phase diagram from statistical simulation (in session "Surface Science & Applied Surface Science")

Deep oscillation versus direct current magnetron sputtering of AlN thin films for acoustic biosensors (in session "Thin Films & Surface Engineering")

Design and commissioning of the Cryogenic SEY measurement facility at Daresbury (in session "Poster Session Tuesday")

Design and Manufacturing of a wireless SAW-Pirani sensor with extended range (in session "Vacuum Science & Technology")

Determination of pumping properties and surface resistance of quaternary alloy of non-evaporable getter of TiZrVCu (in session "Poster Session Tuesday")

Determination of pumping properties of Quaternary alloy of TiZrVAl non evaporable getter (in session "Poster Session Tuesday")

Determination of the pressure in a TO vacuum package using a micro Pirani (in session "Vacuum Science & Technology")

Developement of highly repeatable and recoverable phototransistors based on multi-functional oxide channels (in session "Poster Session Wednesday")

Development and first investigations of a new static expansion system based on aluminum technology (in session "Vacuum Science & Technology")

Development and optimization of small diameter copper electroformed getter coated vacuum chambers (in session "Vacuum Science & Technology")

Development of 30 and 1000 Torr Full-Scale Optical Diaphragm Gauges (in session "Vacuum Science & Technology")

Development of a coating setup for in-situ deployment of an amorphous carbon thin film in the beam screens of the High Luminosity Large Hadron Collider. (in session "Vacuum in Accelerators")

Development of a Neutral Gas- and Ion-Mass Spectrometer for Jupiter’s Moons (in session "Vacuum Science & Technology")

Development of a new UHV/XHV pressure standard (Cold Atom Vacuum Standard) (in session "Vacuum Science & Technology")

Development of radiation hard and magnetic field compatible vacuum gauges for the ITER project (in session "Poster Session Tuesday")

Development of Vacuum Calibration Apparatus for Planetary Exploration (in session "Poster Session Tuesday")

Diamond-like carbon film with excellent tribomechanical properties deposited by PACVD (in session "Poster Session Wednesday")

Distinctive Microstructures in Bitumen Evolve with Time and Composition (in session "Nanometer Structures and Nanotechnology")

Effect of Carrier Doping of InAs Quantum Dots on the Performance of QD Intermediate-Band Solar Cells (in session "Electronic Materials & Processing")

Effect of Growth Temperature on the Structure of CoCrFeNiCu High Entropy Alloy Films (in session "Poster Session Wednesday")

Effect of Growth Temperature on the Structure of CoCrFeNiCu High Entropy Alloy Films (in session "Thin Films & Surface Engineering")

Effect of hydrogen bulk content on the thermal removal of copper surface oxide (in session "Poster Session Tuesday")

Effect of Methane Addition and Process Temperature on the Hardened Case Properties by Plasma Nitrocarburizing on DIN 100Cr6 Steel (in session "Poster Session Wednesday")

Effect of oxidation time on ZnO nanostructures prepared from Zn films by electro-oxidation (in session "Poster Session Wednesday")

Effect on the electrical and morphological properties of Bi incorporation into ZnO:Ga and ZnO:Al thermoelectric thin films (in session "Electronic Materials & Processing")

Effects of Composition Ratios and Microstructure on Mechanical and Electrical Properties of AZO – Zincone Nanolaminates Using Atomic and Molecular Layer Depositions (in session "Poster Session Wednesday")

Effects of substrate materials on boron and gallium co-doped ZnO films by RF magnetron sputtering (in session "Poster Session Wednesday")

Electromagnetic Characterisations of Non-Evaporable Getter Thin Films based on Waveguide Method (in session "Poster Session Tuesday")

Electron impact on the cryosorbed gas of selected accelerator materials. (in session "Poster Session Tuesday")

Electron source for an improved hot cathode ion gauge (in session "Vacuum Science & Technology")

Electron stimulated desorption yield of technical materials used in the LHC vacuum system (in session "Poster Session Tuesday")

Electronic properties of pristine and potassium-doped dibenzopentacene on Au(111) studied by UPS, MAES, and first-principles calculation (in session "Poster Session Tuesday")

Enhanced photoresponsivity of Au functionalized ZnO nanofibers (in session "Nanometer Structures and Nanotechnology")

Ensuring well defined quality of vacuum components – a combined user and manufacturer perspective (in session "Vacuum Science & Technology")

Epitaxial growth of CuInSe2/InSe/Si heterostructures for photovoltaic applications (in session "Poster Session Wednesday")

Erosion and tungsten surface enrichment of Eurofer-97 steel exposed to a deuterium plasma in the GyM linear device (in session "Vacuum in Accelerators")

European Vacuum Conference: The First 30 Years (in session "Opening")

Evaluation of Mechanical Properties of Transparent AZO(Aluminum-doped Zinc Oxide)-zincone Hybrid Multilayer Thin Films Grown on a Transparent Polyimide Substrate by Atomic and Molecular Layer Depositions (in session "Poster Session Wednesday")

Exotic behaviour of topological semimetal SB (111) (in session "Surface Science & Applied Surface Science")

Experimental validation of plasma simulations applied to niobium coating by DC sputtering (in session "Plasma Science and Technology")

Experiments on exhaust performance by NEG applied pumping system (in session "Poster Session Tuesday")

Exploring Matter at Ultrashort Time Scales (in session "60 years IUVSTA")

Facile fabrication of amine-functionalized g-C3N4 nanosheets for enhanced nitrogen photofixation (in session "Poster Session Tuesday")

FBG-based diagnostics for large vacuum machines (in session "Vacuum in Accelerators")

Field emission induced lower switching power of TiO2 memristor using CNT-array as bottom electrode (in session "Poster Session Wednesday")

Field-emission investigations of micro-structured stainless steel ASTM 304 (in session "Poster Session Tuesday")

Fine Analysis of Surface Structure by using Kikuchi Envelope of Reflection High-Energy Electron Diffraction (in session "Surface Science & Applied Surface Science")

Flow Field Calculation and Optimization of Spiral Groove Dry Seal for Screw Vacuum Pump (in session "Poster Session Tuesday")

Formation and structure of TiN/ZrN multilayer coatings deposited on tool steel (in session "Poster Session Wednesday")

From vacuum acceptance test to vacuum simulation: ELENA case study (in session "Poster Session Tuesday")

Functional Metal-Oxide and Diamond-like Carbon Thin Films using Standard and High Power Impulse Magnetron Sputtering (in session "Thin Films & Surface Engineering")

Functionalization of organosilicate thin films by catalytic reaction using Microwave-exited Plasma (in session "Poster Session Wednesday")

Fundamental mechanisms of accelerated and plasma ion interactions with materials: insights from atomistic simulations (in session "Plenary session")

Gas Modulation Refractometry for High-Precision Assessment of Pressure under Non-Temperature-Stabilized Conditions (in session "Vacuum Science & Technology")

Generation of an energy and mass selective hyperthermal ion beam for investigation of ion-assisted thin film growth processes (in session "Thin Films & Surface Engineering")

Getter pumping for particle accelerators (in session "60 years IUVSTA")

Grain boundary segregation in binary alloys: Prediction of thermodynamic characteristics and interaction coefficients (in session "Surface Science & Applied Surface Science")

Growth of obliquely deposited nanostructured Ti thin films (in session "Nanometer Structures and Nanotechnology")

Growth of Ti-Zr-V non-evaporable getter films on ion-implanted substrate (in session "Poster Session Wednesday")

Hetero-epitaxial AlN grown for GaN-power devices (in session "Electronic Materials & Processing")

High performance organic single-crystal nanowire electronics via modulate the intermolecular center-to-center distance (in session "Poster Session Wednesday")

High Vacuum set-up for permeability and diffusivity measurements of vacuum materials (in session "Vacuum Science & Technology")

Highly Conductive, Stretchable, Flexible Transparent Electrodes on Bio-polymer Substrates for Stretchable Electronics (in session "Poster Session Wednesday")

Highly selective covalent organic functionalization of epitaxial graphene: a platform nano-bio-hybrid composites (in session "Surface Science & Applied Surface Science")

Hollow cathode discharge for the deposition of amorphous carbon thin films. (in session "Plasma Science and Technology")

How to get Published in a Scientific Journal (in session "Tutorial")

Hybrid metal/inorganic/organic nanotubes (in session "Nanometer Structures and Nanotechnology")

Improvement of Magnetic Structure of Sputtering Ion Pump (in session "Poster Session Tuesday")

Improving plasma uniformity using superimposed multi-frequency of an inductively-coupled plasma source (in session "Poster Session Wednesday")

In-situ electrical characterization on dipole formation on MoS2 by atomic layer deposition (in session "Thin Films & Surface Engineering")

In-situ TEM investigation of amorphous Cu-Mn/C films for interconnect application (in session "Poster Session Wednesday")

In-Situ²: In-Situ High-Temperature High-Energy X-Ray Diffraction and In-Situ Micromechanical Testing of nanostructured AlCrSiN-AlCrN multilayer coating prepared by reactive arc evaporation (in session "Thin Films & Surface Engineering")

Integrated Testing Method of Pumping Performance for Dry Vacuum Pump (in session "Vacuum Science & Technology")

Intensity Tuning of X-Ray Laser Photon Pulses with Rarefied Gases: The SASE3 Beamline Gas Attenuator at the European XFEL Facility. (in session "Vacuum in Accelerators")

Investigation of copper conditioning and deconditioning processes for particle accelerators (in session "Vacuum in Accelerators")

Investigation of the influence of molecular and atomic nitrogen ion species during epitaxial nitride thin film growth (in session "Thin Films & Surface Engineering")

Investigations by simulation for ionization type gauges suitable as vacuum transfer standard (in session "Poster Session Tuesday")

Ion pump design to minimize particle emissions (in session "Vacuum Science & Technology")

Key Features of Reactive High Power Impulse Magnetron Sputtering (in session "Plasma Science and Technology")

LASE surfaces for the mitigation of the Electron cloud in positively charged accelerators (in session "Poster Session Wednesday")

Laser–SARPES study of spin-texture of Sn atomic layer at graphene/SiC(0001) interface (in session "Surface Science & Applied Surface Science")

LCLS-II beamline components: from manufacturing to particle free installation (in session "Vacuum in Accelerators")

LHC Beam Vacuum Evolution during Run 2 Machine Operation (in session "Thin Films & Surface Engineering")

Liquids in vacuum. Atomic Layer Injection for studying the origin of life. (in session "Poster Session Tuesday")

Long-range interactions induced by oriented water molecules within plasma polymeric subsurfaces (in session "Plasma Science and Technology")

Low Energy Electrons Yield of copper as received and after sputtering (in session "Vacuum in Accelerators")

Low-temperature atmospheric microwave plasma using two-parallel-wires transmission line resonator (in session "Poster Session Wednesday")

Magnetic field sensors based on 2D materials as graphene and Bi2Se3 (in session "Nanometer Structures and Nanotechnology")

Magnetron Sputter Deposition of Ti-Nb Coatings on AISI 316L Stainless Steel (in session "Thin Films & Surface Engineering")

Measurement of permeability of low permeable membranes (in session "Vacuum Science & Technology")

Measurement of the adsorption isotherms and the mean residence time of hydrogen and deuterium physisorbed on a cold copper surface (in session "Poster Session Tuesday")

Measurement of the radiation tolerance of vacuum pumps (in session "Vacuum Science & Technology")

Measuring the Change of Gas Flow Conductance Due to Altered Surface Conditions of a Tube (in session "Poster Session Tuesday")

Measuring uncertainty for various types of dual-rotating-compensator spectroscopic ellipsometers (in session "Poster Session Wednesday")

Microscopic insights on properties of morphologically complex materials using advanced synchrotron-based methods (in session "Surface Science & Applied Surface Science")

Microscopic Mechanism of Mg-Al Alloy Coating Damping Properties：A Molecular Dynamics study (in session "Poster Session Tuesday")

Microstructure, Stress Gradients, and Mechanical Properties in Diamond Films Revealed by Cross-sectional X-ray Nanodiffraction and Microcantilever Testing (in session "Thin Films & Surface Engineering")

Microwave-excited Microplasma Arrays in Atmospheric Air by Coplanar Waveguide Resonator (in session "Poster Session Wednesday")

Mimicking cosmic dust in the laboratory. The STARDUST machine (in session "Poster Session Tuesday")

Modeling of Vacuum Systems: Discrete and Continuum Physical-Mathematical Approaches (in session "Poster Session Tuesday")

Monitoring of volatile vacuum species using remote optical emission spectroscopy (in session "Vacuum Science & Technology")

Monte Carlo study on magnetic properties in ferrimagnetic Ising thin films (in session "Poster Session Wednesday")

Nanostructures and layer stacking in artistic materials: the origin of colors in paintings (in session "Plenary session")

Nanotechnology Applied to Marine Polysccharides - Potential Biobased Packaging Films (in session "Nanometer Structures and Nanotechnology")

Nanotechnology the next decade: A Key Enabler for Disruptive Innovations. (in session "Nanometer Structures and Nanotechnology")

Nanotopographic microdomains on Ti alloys by sequential ion beam irradiation and wet etching (in session "Poster Session Wednesday")

NEG coating for narrow tubes: challenges in deposition and testing (in session "Poster Session Tuesday")

NEG coatings on small diameter vacuum chambers for Hefei Advanced Light Source (in session "Poster Session Wednesday")

New aluminium beam pipe upgrade for the LHC experiments during the LS2 (in session "Vacuum Science & Technology")

New design flexibility for non-magnetic UHV chambers by using AluVaC®-Technology (in session "Vacuum Science & Technology")

Novel Superhydrophobic Celllulose Coating and Its Multifunctional Applications (in session "Thin Films & Surface Engineering")

One-dimensional phosphorus chain and two-dimensional blue phosphorene grown on Au(111) by molecular-beam epitaxy (in session "Surface Science & Applied Surface Science")

One-photon and two-photon photoemission studies on hydrogenated TiO2 surfaces (in session "Surface Science & Applied Surface Science")

Optical coatings of tomorrow: From passive interference filters and multifunctional systems towards smart meta-structures - Change of paradigm? (in session "Plenary session")

Optimisation of sputtered film surface bioactivity via structural and chemical variations (in session "Biointerfaces")

Optimization of noble metal nanostructured substrates for SERS. (in session "Nanometer Structures and Nanotechnology")

Outgassing and gas uptake properties of vacuum and 3D printed materials (in session "Vacuum Science & Technology")

Outgassing Measurements of Laser Engineered Copper Surfaces (in session "Poster Session Tuesday")

Outgassing of differently gold-coated copper samples (in session "Poster Session Tuesday")

Oxygen dosing systems for Diamond Optics. (in session "Poster Session Tuesday")

Oxygen Reduction Reaction Activity for Surface-strain-controlled Pt-M(111) Model Catalyst Surfaces Prepared in UHV (in session "Surface Science & Applied Surface Science")

Particle free ESS vacuum system (in session "Vacuum Science & Technology")

Pentacene on Au(111) and Cu(111) studied by UPS, MAES, and first-principles calculation (in session "Poster Session Tuesday")

Photo desorption studies on the FCC-hh Beam Screen at the KIT Electron Storage Ring KARA (in session "Vacuum in Accelerators")

Photoelectron spectroscopy using high-order harmonics at megahertz repetition rates: study of correlated electron pairs in solids (in session "Surface Science & Applied Surface Science")

Plasma electrolytic oxidation of niobium in silicate electrolyte (in session "Surface Science & Applied Surface Science")

Plasma-based substrate modification for highly c-axis oriented growth of AlN and Al

_{1 - x}

S

_{c x}

N thin films by reactive magnetron sputtering (in session "Thin Films & Surface Engineering")

Plasma-inspired biomaterials (plenary) (in session "Biointerfaces")

Pressure evolution in a 3D microcavities array (in session "Vacuum Science & Technology")

Pressure evolution studies in the LHC beam pipe vacuum system at room temperature (in session "Poster Session Tuesday")

Process optimization of AZO thin films with Al2O3 buffer layers prepared by RF magnetron sputtering (in session "Poster Session Tuesday")

Properties of CdZnTe films deposited on polyimide substrates by close-spaced sublimation (in session "Poster Session Wednesday")

Radio frequency surface resistance measurement of metals for accelerator vacuum chamber (in session "Poster Session Tuesday")

Remote Anode Assisted Magnetron Sputtering (RAAMS) of Cr-based Hard Coatings for Tribological Applications (in session "Thin Films & Surface Engineering")

Research on the accumulation leak detection method of helium mass spectrometry based on low vacuum (in session "Poster Session Tuesday")

Research on the Optical-Electrical Characteristic of Amorphous Silicon Thin Film (in session "Poster Session Tuesday")

RF power conditioning of the Elettra’s cavities with UHV NEG technology. (in session "Poster Session Tuesday")

Room temperature magnetron sputtering of InGaZnO and ZTO amorphous oxide semiconductors (in session "Poster Session Wednesday")

ScAlN: A novel piezoelectric material (in session "Electronic Materials & Processing")

Scanning helium microscopy (SHeM), contrast mechanisms, resolution and sensitivity in a new imaging technique (in session "Surface Science & Applied Surface Science")

Secondary Electron Emission Study of Nanometric Carbon Coatings (in session "Surface Science & Applied Surface Science")

Selective biofunctionalization of porous silicon through visible light induced amino silanization (in session "Biointerfaces")

Self-Assembling Behavior of Cysteine-Modified Oligopeptides: an XPS and NEXAFS Study (in session "Biointerfaces")

Self-supporting Porous Pt-Ag Aerogel as Highly Bifunctional Active Electrocatalysts for Oxygen reduction and Methanol oxidation (in session "Poster Session Wednesday")

Semiconductor Thin Films by Hybrid Pulsed Laser Deposition Methods (in session "Thin Films & Surface Engineering")

Shape memory alloy technologies for ultra-high vacuum coupling in particle accelerators (in session "Vacuum in Accelerators")

Simulation and measurement of the deuterium retention in the cryogenic beamline of the KATRIN experiment (in session "Vacuum Science & Technology")

Simulation of an extractor ionisation gauge (in session "Vacuum Science & Technology")

Single Metal Zirconium Non-Evaporable Getter Coating (in session "Poster Session Tuesday")

Solid Solution Hardening of Reactively Sputtered Nanolaminate ZrN-TiN Coatings (in session "Poster Session Wednesday")

Solution immersed silicon (SIS)-based biosensors for the direct monitoring of small-molecular-weight analytes (in session "Poster Session Wednesday")

Specific features of thin film metallic glasses and their elastic properties relationship (in session "Thin Films & Surface Engineering")

Stabilisation of tetragonal ZrO2 by oxygen plasma treatment of sputtered ZrCu and ZrAl thin films (in session "Poster Session Wednesday")

Strain relaxation and epitaxial relationship of perylene overlayer on Ag(110). (in session "Surface Science & Applied Surface Science")

Stretchable Transparent Electrodes Based on Silver Nanowires and Conductive Polymers for Stretchable Electronics (in session "Poster Session Wednesday")

Structural Improvement of Multiple-Cavity Dry Scroll Vacuum Pump (in session "Vacuum Science & Technology")

Structure and properties of ion-assisted and co-sputtered Ti-Zr-B hard and superhard coatings (in session "Thin Films & Surface Engineering")

Structure and properties of TiO2/TiN deposited on EBM modified stainless steel (in session "Poster Session Wednesday")

Structure, thermal stability and oxidation resistance of TiBN PVD hard coatings (in session "Thin Films & Surface Engineering")

Study of the thermal transpiration applied to a CDG with an adjustable temperature (in session "Poster Session Tuesday")

Study on the helium permeability of graphene oxide membranes for leak testing (in session "Poster Session Tuesday")

Surface analysis of nanomaterials: needs and challenges. (in session "Nanometer Structures and Nanotechnology")

Surface modification of a TiN coated steel by ion beam dynamic mixing (in session "Thin Films & Surface Engineering")

Surface properties of TiO2(011) and Mg:TiO2(011) (in session "Surface Science & Applied Surface Science")

Surface Science Modelling and Simulation Toolkit - bridging the gap between theory and experiment for self-assembled monolayers (in session "Surface Science & Applied Surface Science")

Synthesis of 2D MoS2 for flexible gas sensor at low temperature (in session "Poster Session Wednesday")

Synthesis of ZnFe2O4/BiOBr nanocomposites immobilized on Palygorskite with enhanced photocatalytic activity under solar light irradiation (in session "Poster Session Wednesday")

Technological challenges and solutions for vacuum systems of modern particle accelerators (in session "Vacuum in Accelerators")

Temperature stability of decorative electro-magnetic transparent metal-semiconductor thin-films (in session "Thin Films & Surface Engineering")

The 14-billion Year History of the Universe Leading to Modern Materials Science (in session "60 years IUVSTA")

The Bamboo Leaf-like NiCo2O4 nanobelts with Surface Pore Defects Supported on rGO as Advanced Anode Material for Lithium Ion Batteries (in session "Poster Session Wednesday")

The effect of gold particle size on the activity of Au/TiO2 catalyst in the hydrogenation of CO2 (in session "Surface Science & Applied Surface Science")

The End of Mercury Manometers with the Quantum-Based Pascal (in session "Vacuum Science & Technology")

The fascinating world of organic nanocrystals on 2D materials (in session "Plenary session")

The finite element analysis of vacuum leak detection container (in session "Poster Session Tuesday")

The flow through a long rectangular channel and the angular distribution of the emitted molecules (in session "Poster Session Tuesday")

The gas migration in cryogenic tubes (in session "Poster Session Tuesday")

The influence of post-deposition annealing on the microstructure of TiZrV non-evaporable getter coatings, their activation behaviour, and pumping speed. (in session "Thin Films & Surface Engineering")

The leak detection methods of the electric propulsion spacecraft researched after xenon filled (in session "Poster Session Tuesday")

The LIU Project: Vacuum performance simulation of the upgraded PS complex (in session "Poster Session Tuesday")

The LIU Project: Vacuum performance simulation of the upgraded SPS accelerator (in session "Poster Session Tuesday")

The multistage differential pumping system in CIADS (in session "Poster Session Tuesday")

The Nothing On Insulator Nanotransistor with Diamond Lateral Islands for Electrons Emission in Vacuum (in session "Poster Session Wednesday")

The optimisation and simulation of vacuum plume field in ground testing for electric thrusters (in session "Vacuum Science & Technology")

The primary flow jet core in the steam-jet vacuum pump and its influence on the pumping performance at different operating conditions (in session "Poster Session Tuesday")

The role of Ga in the acetylene hydrogenation on PdGa intermetallic (in session "Surface Science & Applied Surface Science")

The role of oxygen in sputtering of ZnO films for ZnO nanorod-based devices (in session "Thin Films & Surface Engineering")

The role of spokes on energy and transport of ions in magnetron sputtering discharges (in session "Plasma Science and Technology")

The Study of Influence of Ambient Humidity on Vacuum Capacitance Diaphragm Gauges (in session "Poster Session Tuesday")

The vacuum chamber for the SwissFEL Athos-undulator (UE38) (in session "Vacuum in Accelerators")

The vacuum concept for the SLS-2 storage ring (in session "Vacuum in Accelerators")

The Vacuum System of the Photon Transport Beamlines at the European XFEL Facility. (in session "Poster Session Tuesday")

Thermal Analysis of Large-scale Cryopump Used in Large Vacuum Leak Detecting System (in session "Vacuum Science & Technology")

Thermal expansion coefficient and elastic modulus of reactive pulsed-DC magnetron co sputtered piezoelectric AlScN thin films (in session "Electronic Materials & Processing")

Thin Films of Trimeric Surfactant as Boundary Lubricants (in session "Thin Films & Surface Engineering")

Transferable nanoporous Ca3Co4O9 thin films for wearable thermoelectric applications (in session "Electronic Materials & Processing")

Trapped aqueous films lubricate a highly-hydrophobic surface. (in session "Thin Films & Surface Engineering")

Tribological and electrical characterization of Ag/Rh coating pair for sliding RF contact application for ITER (in session "Thin Films & Surface Engineering")

Turbo molecular pump as main pump in a high-power proton accelerator vacuum system (in session "Vacuum in Accelerators")

Ultrathin molybdenum disulfide/carbon nitride nanosheets with abundant active sites for enhanced hydrogen evolution (in session "Poster Session Wednesday")

Uniform Magnetic Fields Effects on Secondary Electron Emission of Polycrystalline Copper (in session "Poster Session Tuesday")

Update on the Status of the Vacuum Systems of the FAIR Accelerator Complex (in session "Vacuum in Accelerators")

Vacuum leak testing system for the propulsion system of large spacecraft (in session "Poster Session Tuesday")

Vacuum measurement standards at KRISS and results of bilateral comparison between KRISS and NINVAST (in session "Poster Session Tuesday")

Variational Principles and Applications of Local Topological Constants of Motion for Non-Barotropic Magnetohydrodynamics (in session "Vacuum Science & Technology")

Working in Vacuum - Extravehicular Activities in Low Earth Orbit (in session "60 years IUVSTA")

XPS study of the front/back interfaces in Kesterite photovoltaic devices (in session "Poster Session Wednesday")

Choose timezone

15th European Vacuum Conference (EVC-15)

Support