Name: CHATS on Applied Superconductivity 2019
Start: 2019-07-09T08:00:00+02:00
End: 2019-07-12T18:00:00+02:00
Location: Faculty of Mechanical Engineering and Mechatronics of the West Pomeranian University of Technology, Szczecin

Monday, 8 July 2019
Tuesday, 9 July 2019

08:30 REGISTRATION
REGISTRATION
08:30 - 09:20

09:20

09:20 - 09:30
09:30 Experimental results in support of superconducting system modeling
Experimental results in support of superconducting system modeling
09:30 - 10:30
Contributions

09:30 Heat transport in tilted stacks of HTS tapes at temperatures above 20K - Łukasz Tomków (University of Cambridge)

10:00 Hydraulic characterization of conductor prototypes for fusion magnets - Monika Lewandowska (West Pomeranian University of Technology, Szczecin)
10:30 Coffee break
Coffee break
10:30 - 10:50
10:50 Experimental results in support of superconducting system modeling
Experimental results in support of superconducting system modeling
10:50 - 11:50
Contributions

10:50 Strand-Jacket Thermal Contact Resistance of REBCO Conductor Measured on Dummy Conductors - Rui Kang

11:20 Steady-state transverse heat transfer in a single channel CICC - Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)
11:50 Electro-mechanical modeling
Electro-mechanical modeling
11:50 - 12:50
Contributions

11:50 On the Mechanical Behavior of a Nb3Sn Superconducting Coil During a Quench: Three-Dimensional Finite Element Analysis of a Quench Heater Protected Quench - Jose Ferradas Troitino (Universite de Geneve (CH))

12:20 LTS magnets electro-mechanical modelling taking into account magnetic iron forces - Douglas Martins Araujo (CERN)
12:50 Lunch break
Lunch break
12:50 - 14:10
14:10 Electro-mechanical modeling
Electro-mechanical modeling
14:10 - 14:40
Contributions

14:10 Electro-Mechanical FE modeling of CORC® cable configurations based on bending experiments. - Arend Nijhuis (University of Twente)
14:40 Electromagnetics
Electromagnetics
14:40 - 15:40
Contributions

14:40 A-formulation method for full 3D FEM computation of the superconducting magnetization. - Mykola Soloviov (Institute of Electrical Engineering Slovak Academy of Sciences )

15:10 Field Quality Analysis in the HTS Dipole Insert-Magnet Feather M2 with the Finite Element Method. - Lorenzo Bortot (CERN)
15:40 Coffee break
Coffee break
15:40 - 16:00

18:00 Guided city walk
Guided city walk
18:00 - 20:30
Wednesday, 10 July 2019
09:00 Thermo-hydraulic and cryogenics
Thermo-hydraulic and cryogenics
09:00 - 10:30
Contributions

09:00 Adaptation of the nuclear safety code CATHARE3 to supercritical helium flow. - Sulayman Shoala (CEA/DRF)

09:30 Simulation of a cryogenic capillary tube: thermodynamic behavior subjected to heat load. - Maria Barba (CEA (Commissariat à l'Énergie Atomique))

10:00 An update of dynamic thermal-hydraulic simulations of the JT-60SA Cryogenic system for preparing plasma operation - François BONNE (CEA)
10:30 Coffee break
Coffee break
10:30 - 10:50
10:50 Thermo-hydraulic and cryogenics
Thermo-hydraulic and cryogenics
10:50 - 11:20
Contributions

10:50 Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase - Christine Hoa (CEA,IRIG)
11:20 Electro-thermal modeling
Electro-thermal modeling
11:20 - 12:50
Contributions

11:20 Thermal analysis of AC loss heated Nb3Sn coil samples for the High Luminosity upgrade of the LHC. - Kirtana Puthran (CERN)

11:50 Electro-thermal 1D model of the SIS100 superconducting dipole magnet. - Piotr Szwangruber (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

12:20 PSpice modeling of the inrush and fault currents in a 21 MVA HTS transformer. - Pawel Surdacki (Lublin University of Technology)
12:50 Lunch break
Lunch break
12:50 - 14:10
14:10 Electro-thermal modeling
Electro-thermal modeling
14:10 - 15:10
Contributions

14:10 1D and 2D finite-element approaches to extract the resistivity of the superconductor material from pulsed current measurements on HTS commercial tapes. - Nicolo' Riva (EPFL - EPF Lausanne)

14:40 Analysis of Current Distirbution during Quench in a Pancake coil wound with REBCO Roebel cable. - Marco Breschi (University of Bologna)
15:10 Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
15:10 - 15:40
Contributions

15:10 User Defined Elements in ANSYS for Multiphysics Modeling of Superconducting Magnets. - Lucas Brouwer (Lawrence Berkeley National Laboratory)
15:40 Coffee break
Coffee break
15:40 - 16:00
16:00 Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
16:00 - 17:00
Contributions

16:00 OLYMPE, a multi-physic platform for fusion magnet design. - Quentin Le Coz (CEA)

16:30 Empowering the 4C code for the thermal-hydraulic analysis of coils for the design of future SC tokamaks: a novel, fully-3D model of the TF coil structures. - Roberto Bonifetto (Politecnico di Torino)
19:00 Social dinner
Social dinner
19:00 - 22:00
Thursday, 11 July 2019
08:55 Multiphysics modeling of superconducting devices
Multiphysics modeling of superconducting devices
08:55 - 10:00
Contributions

08:55 Fundamental description of Field Induced Josephson junctions and devices built on their base. - Krzysztof Pomorski (University College Dublin)

09:25 FEM Modeling Of Multilayer Canted Cosine Theta (CCT) Magnets. - Rafal Ortwein / Przemyslaw Wachal
10:00 Quench in HTS conductors
Quench in HTS conductors
10:00 - 10:30
Contributions

10:00 Analysis of quench in HTS conductors for fusion applications: a novel 1D thermal-hydraulic modeling approach. - Andrea Zappatore (Politecnico di Torino)
10:30 Coffee break
Coffee break
10:30 - 10:50
10:50 Quench in HTS conductors
Quench in HTS conductors
10:50 - 12:20
Contributions

10:50 Study on conditions for successful quench protections of coils wound with coated conductors by short-sample experiments and quench simulations. - Naoyuki Amemiya (Kyoto University)

11:20 Modelling of a 50 kA REBCO Conductor with Multi-strand Made by Twisted Stacked Tapes. - Rui Kang

11:50 Design and analysis of HTS subsize-conductors for quench investigations towards future HTS fusion magnets. - Michael Wolf (Karlsruhe Institute of Technology (KIT))
12:20 Quench and thermo-hydraulic LTS
Quench and thermo-hydraulic LTS
12:20 - 12:50
Contributions

12:20 Quench Thermohydraulic Analysis of Tore Supra/WEST TF Coil and Smooth Quench Occurrence in Tokamak. - Sylvie NICOLLET (CEA)
12:50 Lunch break
Lunch break
12:50 - 14:10
14:10 Quench and thermo-hydraulic LTS
Quench and thermo-hydraulic LTS
14:10 - 15:40
Contributions

14:10 Numerical Investigation of Quench Event in the Innermost Pair of the KSTAR Central Solenoids. - Dong Keun Oh

14:40 Quench Protection Design of the HL-LHC Hollow Electron Lens System. - Michal Maciejewski (Technical University of Lodz(PL))

15:10 Towards to Quench Limit Determination of Superconducting Magnet with use of Thermal-Electrical Analogy - Dariusz Bocian (Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))
15:40 Coffee break
Coffee break
15:40 - 16:00
16:00
16:00 - 17:00
Contributions

16:00 Workshop wrap-up
Friday, 12 July 2019

07:45 Wendelstein 7-X tour
Wendelstein 7-X tour
07:45 - 16:00