Mechanical instrumentation update

Tuesday 15 Jan 2019, 09:00 → 11:00 Europe/Zurich

Coil measuring tooling:

- all the external instrumentation has been checked by Sohrab. Some measuring fingers (3) do not measure. 

- The measuring bars have been removed from the tooling and are being inpected and repaired in MG's lab. we agree that only "easy-fix" will be performed to keep a reasonable schedule.

-Sohrab will keep cea posted on the progress.

Collars:

- the collars need to be thermally cycled to validate the gluing of the gauges. This will be performed by mid february. Now pending the readiness of the mechnical lab.

- MG confirms that shielded cables with twisted pairs are used from the cryostat to the SG DAQ. they used the so called NE 48 from CERN shop. this is a 48 wire shielded cable 

Bullets:

- the diameter of our screws are small M8, even if we manage to include a small cylinder, this might be very difficult to instrument. CEA will keep looking into it.

09:00 → 09:20 update (all)

Speakers: Damien Simon (Université Paris-Saclay (FR)), Helene Felice (Université Paris-Saclay (FR)), Michael Guinchard (CERN), Simon Perraud, Sohrab Emami Naini