Name: FCC November Week 2020
Start: 2020-11-09T08:30:00+01:00
End: 2020-11-13T16:00:00+01:00
Location: No location set

FCC November Week 2020

from Monday, 9 November 2020 (08:30) to Friday, 13 November 2020 (16:00)

Monday, 9 November 2020
08:45
08:45 - 10:30
Room: Remote
Contributions

08:45 Welcome address - Jorgen D'Hondt (Vrije Universiteit Brussel (BE))

09:00 Host states address - Anne-Isabelle Etienvre (Université Paris-Saclay (FR))

09:15 Host State address - Guenther Dissertori (ETH Zurich (CH))

09:30 Update of the European Strategy - Ursula Bassler (Centre National de la Recherche Scientifique (FR))

10:00 CERN vision and goals until next strategy update - Fabiola Gianotti (CERN)
10:30 Break
Break
10:30 - 11:00
11:00
11:00 - 12:00
Room: Remote
Contributions

11:00 FCC-ee physics motivation - Christophe Grojean (DESY (Hamburg) and Humboldt University (Berlin))

11:30 FCC feasibility study and FCCIS H2020 project - Michael Benedikt (CERN)
12:00 Break
Break
12:00 - 13:30
13:30
13:30 - 15:00
Room: Remote
Contributions

13:30 FCCIS WP2 (FCC-ee Collider Design) - Ilya Agapov (Deutsches Elektronen-Synchrotron (DE))

14:00 FCCIS WP3 (Integrate Europe) - Johannes Gutleber (CERN)

14:30 FCCIS WP4 (Impact & Sustainability) - Silvia Vignetti (CSIL)
15:00 Break
Break
15:00 - 15:30
15:30
15:30 - 18:00
Contributions

15:30 FCCIS Governance and Management structures (GA/CA) - Mandy Stewart (CERN) Michael Benedikt (CERN)

16:00 FCCIS Executive Board (Closed session) - Michael Benedikt (CERN)

17:00 FCCIS General Assembly (Closed session) - Michael Benedikt (CERN)
Tuesday, 10 November 2020

08:30 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
08:30 - 10:00
FCC-ee optics
FCC-ee optics
08:30 - 10:00
Contributions

08:30 Lattice status and open questions/ next steps - Katsunobu Oide Katsunobu Oide (High Energy Accelerator Research Organization (JP))

09:00 Emittance tuning simulations and next steps - Tessa Charles (University of Liverpool (GB))

09:30 Status and plan for the FCC-ee booster design - Antoine Chance (CEA Irfu)
Placement optimization
Placement optimization
08:30 - 10:00
Room: Remote
Contributions

08:30 Work program goals and contents - Johannes Gutleber (CERN)

08:50 Collider requirements and constraints - Volker Mertens (CERN)

09:10 Territorial placement analysis: method and progress - Pierre Boillon (Cerema)
10:00 Break
Break
10:00 - 10:30

10:30 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
10:30 - 12:00
FCC-ee collective effects
FCC-ee collective effects
10:30 - 12:00
Room: Remote
Contributions

10:30 Beam-beam and parameter studies - Dmitry Shatilov (Budker Institute of Nuclear Physics (RU))

11:00 Single-beam collective effects - Mauro Migliorati (Sapienza Universita e INFN, Roma I (IT))

11:30 Collective effects – expertise and plans at DESY - Rainer Wanzenberg (Deutsches Elektronen-Synchrotron (DE))
Environmental Evaluation
Environmental Evaluation
10:30 - 12:00
Contributions

10:30 Requirements, concept, method and plan for environmental evaluation - Maude Sauvain (Latitude Durable) Patrycja Magdalena Laidouni (CERN) Pierre Boillon (Cerema)

10:50 Frameworks for user with environmental evaluation NF/EN/ISO 14001, 14006, 31000 - Johannes Gutleber (CERN)

11:10 Territorial and environmental optimisation : how to keep track using GIS - Anne-Laure Verdier
12:00 Break
Break
12:00 - 13:30

13:30 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
13:30 - 15:00
Joint FCC-ee accelerator and experiments session
Joint FCC-ee accelerator and experiments session
13:30 - 15:00
Contributions

13:30 MDI challenges toward the TDR - Manuela Boscolo (INFN e Laboratori Nazionali di Frascati (IT))

14:00 SuperKEKB experience on MDI design and beam background - Hiroyuki NAKAYAMA (KEK)

14:20 Vibration/stabilization: from SuperKEKB to FCC-ee - Laurent BRUNETTI (LAPP IN2P3 CNRS Université de Savoie) Laurent Brunetti (Centre National de la Recherche Scientifique (FR))

14:40 Possible contributions to MDI - Ralph Wolfgang Assmann (DESY) Ralph Wolfgang Assmann (Deutsches Elektronen-Synchrotron (DE))
MATEX workshop
MATEX workshop
13:30 - 15:00
Contributions

13:30 Plan and status for the development of an excavated materials management plan - LAETITA D'ALOIA (CETU) Luisa Ulrici (CERN)

13:50 Legal requirements, constraints and opportunities - Jacques Noel Martelain LAETITA D'ALOIA (CETU)

14:10 Risk management applied to excavated materials - Florent ROBERT (CETU)
Socio-economics impact analysis
Socio-economics impact analysis
13:30 - 15:00
Contributions

13:30 Socio-economic impact analysis for FCC – concept and method - Johannes Gutleber (CERN)

13:40 Plan for the socio-economic impact study - Emanuela Sirtori (CSIL)

14:00 Social discount rate for the project - Jessica Catalano (CSIL)

14:15 Status of baseline assumptions - Irene Del Rosario Crespo Garrido (Universidade de Santiago de Compostela (ES))
15:00 Break
Break
15:00 - 15:30

15:30 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
15:30 - 17:00
FCC-ee beam diagnostics, beam tests and girders
FCC-ee beam diagnostics, beam tests and girders
15:30 - 17:00
Contributions

15:30 Developing and testing beam diagnostics for FCC-ee - Anke-Susanne Mueller (KIT) Gudrun Niehues (KIT)

15:55 Possible beam studies at SuperKEKB - Jacqueline Keintzel (Vienna University of Technology (AT))

16:05 Possible beam studies at DAFNE - Jacqueline Keintzel (Vienna University of Technology (AT))

16:15 Possible beam studies at PETRA III - Ilya Agapov (Deutsches Elektronen-Synchrotron (DE))

16:25 Possible beam studies at VEPP-4M - Sergei Nikitin (Budker institute of nuclear physics)

16:35 FCC-ee injector update & e+ source test at PSI - Paolo Craievich (PSI)

16:45 FCC-ee beam diagnostics, beam tests, and support structures - Gael Balik (LAPP)
MATEX workshop
MATEX workshop
15:30 - 17:00
Contributions

15:30 Rock characterisation for tunnel construction & re-use - Maximilian Haas (Leoben University (AT))

15:50 Management of matex as part of the environmental risk management process - Robert Galler

16:10 Survey of regional constraints and potentials for the excavation material - Antoine Faure (setec lerm)
Regional benefits work plan
Regional benefits work plan
15:30 - 17:00
Contributions

15:30 Plan for the analysis of regional benefits in a global project - Gabriele Piazza (London School of Economics and Political Science)

15:50 Example for territorial benefit development from the Science Gateway project - Patrick Geeraert (CERN)

16:10 Regional development potentials in the Annecy region for FCC - Giovanni Lamanna (Centre National de la Recherche Scientifique (FR))
17:00 Joint session/ Round table Discussion: engaging the theory and experimental communities
Joint session/ Round table Discussion: engaging the theory and experimental communities
17:00 - 18:00
Wednesday, 11 November 2020
08:30 WP1 presentation
WP1 presentation
08:30 - 10:00
Contributions

08:30 Management of publications - Julie Hadre (CERN)

09:00 Management of data in the FCCIS H2020 project - Johannes Gutleber (CERN)

09:30 Project management environment - Johannes Gutleber (CERN) Julie Hadre (CERN)
09:00 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
09:00 - 11:00

10:00 Break
Break
10:00 - 10:30
10:30 Host state activities
Host state activities
10:30 - 12:00
Contributions

10:30 FCC - Institutional relations with the 2 Host States during the feasibility study phase - Olivier Martin (Ministere des affaires etrangeres et europeennes (FR))

10:50 Integration of FCC activities with Swiss authorities - Maude Sauvain (Latitude Durable)

11:10 Integration of FCC activities with French authorities - Amandine Bibet Chevalier (Cerema)
11:00 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
11:00 - 12:30

12:00 Break
Break
12:00 - 13:30
13:30 Dissemination and stakeholder engagement
Dissemination and stakeholder engagement
13:30 - 15:10
Contributions

13:50 Plan for community building through the development of a joint physics programme at the FCCs - Marcin Chrzaszcz (Polish Academy of Sciences (PL))

14:10 Plan for scientific/technical dissemination - Christian Caron (Springer Nature)

14:30 Fundamentals for the communication strategy of FCC - Markus Mooslechner (Terra Mater Factual Studios)

14:50 Project visual language and guidelines - Feldner Astrid (Bleed Design Studio)
14:00 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
14:00 - 15:30
MDI - joint accelerator & experiments
MDI - joint accelerator & experiments
14:00 - 15:30
Contributions

14:00 See contributions on 4th FCC Physics Workshop
15:30 Break
Break
15:30 - 16:00
16:00 Intro to Overleaf for non-LaTeX Users
Intro to Overleaf for non-LaTeX Users
16:00 - 17:30
Contributions

16:00 Intro to Overleaf for non-LaTeX Users
4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
16:00 - 17:30
MDI - joint accelerator & experiments
MDI - joint accelerator & experiments
16:00 - 17:30
Contributions

16:00 See contributions on 4th FCC Physics Workshop
Thursday, 12 November 2020

08:30

08:30 - 10:00
Accelerator code development
Accelerator code development
08:30 - 10:00
Contributions

08:30 Desirable optics code features - Katsunobu Oide (High Energy Accelerator Research Organization (JP))

08:45 Code development plan - Tatiana Pieloni (EPF Lausanne)

09:00 Modelling tapering - Leon Van Riesen-Haupt (CERN)

09:10 The tilted solenoid - Tobias Hakan Bjorn Persson (CERN)

09:20 Tracking tool for background simulations - Andrea Ciarma (INFN LNF)

09:30 The polarization code challenge - Eliana Gianfelice-Wendt (FNAL)

09:40 Questions and answers
Mining the future
Mining the future
08:30 - 10:00
Contributions

08:30 Mining the Future Challenge Competition - Overview - Robert Galler

08:50 Mining the future schedule and plan - Johannes Gutleber (CERN)

09:10 The Koralm Tunnel - mastering the challenges of reusing excavated materials - Dietmar Schubel (ÖBB-Infrastruktur AG) Roman Schaffer (ÖBB-Infrastruktur AG)
10:00 Break
Break
10:00 - 10:30

10:30

10:30 - 12:00
10:30 - 12:00
Room: Remote
Contributions

10:30 Overview and current status of EPJ+ publications - Christian Caron (Springer Nature)

10:45 Round table
12:00 Break
Break
12:00 - 13:30

13:30

13:30 - 15:00
EIC/FCC 1
EIC/FCC 1
13:30 - 15:00
Contributions

13:30 Impedances, beam instabilities, and beam feedbacks - Michael Blaskiewicz (Brookhaven National Laboratory)

13:50 Lepton polarisation - Alain Blondel (Universite de Geneve (CH))

14:10 Beam instrumentation, SR monitors - Thibaut Lefevre (CERN)

14:30 MDI, IR shielding and IR handling equipment - Walter Wittmer (JLAB)
Tools for collaborative writing & publishing of scientific documents
Tools for collaborative writing & publishing of scientific documents
13:30 - 15:05
Contributions

13:30 CERN's Digital Repositories Technology & Services Highlights - Jose Benito Gonzalez Lopez (CERN)

13:50 Collaborative Writing : Overleaf N.N. - John Hammersley (Overleaf)

14:15 Collaborative Writing : Springer Nature N.N - Volker Boeing (Springer)

14:40 Publishing of Proceedings - FCC week 2021 and beyond - Christian Caron (Springer Nature)
15:00 Break
Break
15:00 - 15:30
15:30 Intro to Overleaf for Intermediate/Advanced users
Intro to Overleaf for Intermediate/Advanced users
15:30 - 17:00
Contributions

15:30 Intro to Overleaf for Intermediate/Advanced users
15:30 - 17:00
EIC/FCC 2
EIC/FCC 2
15:30 - 17:00
Contributions

15:30 SRF - Robert Alan Rimmer

16:00 Vacuum system - Roberto Kersevan (CERN)

16:30 Final-focus quadrupoles - Brett Parker (Brookhaven National Laboratory (US))
Friday, 13 November 2020

08:30 4th FCC PHYSICS WORKSHOP
4th FCC PHYSICS WORKSHOP
08:30 - 15:30

Choose timezone

Share this page

Direct link

Social networks

Calendaring