Focus on:  Hide Contributions
Back to Conference View
Login
MT27, 27th International Conference on Magnet Technology

from Monday, November 15, 2021 (7:00 AM) to Friday, November 19, 2021 (8:00 PM)
Fukuoka Convention Center

        : Sessions
    /     : Talks
        : Breaks
Nov 15, 2021
Nov 16, 2021
Nov 17, 2021
Nov 18, 2021
Nov 19, 2021
AM
8:00 AM --- Asian Superconductivity School - Part I - ---
7:00 AM --- Online Poster Sessions #1 *See the on-site poster session at 13:15 for presentation details* ---
8:00 AM --- Registration ---
9:00 AM --- Opening Session ---
9:30 AM --- Break ---
10:00 AM
TUE-OR1-102 Magnets for accelerator science and particle physics - Tatsushi Nakamoto (KEK) VLADIMIR KASHIKHIN (Fermilab) (until 12:00 PM)
10:00 AM Conductors for Fast Ramping Accelerator Magnets - emanuela barzi (Fermilab)  
10:15 AM SIS100 superconducting magnet series production - Tiemo Winkler (GSI)  
10:30 AM Conduction Cooling Test of Short Period NI HTS Undulator at Different Opearating Temperature Ranges 20-77 K - Jeonghwan Park (Seoul National University)  
10:45 AM Design, Construction, and Testing of 0.5-m-long, 18-mm Period Nb3Sn Superconducting Undulator Magnets - Ibrahim Kesgin (Argonne National Laboratory)  
11:00 AM Status of mu2e Transport Solenoid cold mass - Vito Lombardo (Fermi National Accelerator Laboratory)  
11:30 AM Design and quench analysis for transparent superconducting solenoids for the Innovative Detector for Electron-positron Accelerators at the lepton Future Circular Collider - Dr Nikkie Deelen (CERN)  
10:00 AM
TUE-OR1-304 Resistive and Pulsed High-Field Magnets - Kohki Takahashi (Tohoku University) Mark Bird (FSU) (until 12:00 PM)
10:00 AM [Invited] Status of the Pulsed-Magnet Program at the Dresden High Magnetic Field Laboratory - Sergei Zherlitsyn (Helmholtz-Zentrum Dresden-Rossendorf, Hochfeld-Magnetlabor Dresden)  
10:15 AM Recent developments at the pulsed magnetic field facility of the LNCMI - Mr Jérôme Béard (LNCMI - CNRS - UPS - INSA - UGA)  
10:30 AM Redesign and rebuild of the Coils for the 60 T Controlled Waveform Magnet at the NHMFL - Doan Nguyen (Los Alamos National Lab)  
10:45 AM 60-T pulsed magnet for x-ray scattering experiments at the European XFEL - Dr Shingo Yamamoto (Dresden High Magnetic Field Laboratory, Helmholtz-Zentrum Dresden-Rossendorf)  
11:00 AM Optimizing single-turn coils for scientific applications beyond 100T - Dr Oliver Portugall (CNRS-LNCMI)  
11:15 AM High electric conductivity and optimum strength in cold-drawn CuCrZr alloys at 295K and 77K - Rongmei Niu (National High Magnetic Field Laboratory)  
11:30 AM A Novel Design of Multi-coil Magnet System for 100 T - Liang Li (Huazhong University of Science and Technology)  
11:45 AM Flux Concentrator Optimization for Future Positron Sources - Hugo Bajas (CERN)  
10:00 AM
TUE-OR1-602 High Tc Wires and Cables I - Masami Iio (High Energy Accelerator Research Organization (KEK)) Yifei Zhang (until 12:00 PM)
10:00 AM Recent progress of RE-based High Temperature Superconductors at Fujikura - Masanori Daibo  
10:15 AM Current review of the 2G-HTS wires production for high-field applications at SuperOx - Dr Valery Petrykin (SuperOx Japan LLC)  
10:30 AM Progress of 2G HTS Development and Process Improvement at SuperPower - Yifei Zhang (SuperPower Inc.)  
10:45 AM Report on the Improvement of In-field Critical Current in SuNAM’s Coated Conductor - Dr Hunju Lee (SuNAM Co., Ltd.)  
11:00 AM Advanced HTS tape for high-field applications by THEVA - Dr Markus Bendele (THEVA Dünnschichttechnik GmbH)  
11:15 AM The effects of nanostructure on Jc(B, T) in ReBCO coated conductors at multiple angles - Ashleigh Francis (National High Magnetic Field Laboratory)  
11:30 AM Irradiation effect on superconductivity of REBCO coated conductors - Masami Iio (High Energy Accelerator Research Organization (KEK))  
11:45 AM Low-AC-loss SCSC cable: magnetization loss measurements of spiral copper-plated multifilament coated conductors - Prof. Naoyuki Amemiya (Kyoto University)  
7:00 AM --- Online Poster Sessions #2 *See the on-site poster session at 10:30 for presentation details* ---
8:00 AM --- Registration ---
8:30 AM
WED-OR2-103 HL-LHC Accelerator Magnets I - emanuela barzi (Fermilab) Ken-ichi Sasaki (KEK) (until 10:30 AM)
8:30 AM [Invited] Analysis of the production of MQXFA Low Beta Quadrupoles for HL-LHC at 50% coil fabrication - Giorgio Ambrosio (Fermilab)  
8:45 AM [Invited] AUP first pre-series Cryo-Assembly Design Production and Test Overview - Dr Sandor Feher (FNAL)  
9:00 AM Power Test of the First Two MQXFB Quadrupole Magnets Built at CERN for the HL-LHC Low-Beta Insertion - Franco Julio Mangiarotti (CERN)  
9:15 AM Performance of a MQXF Nb3Sn Quadrupole Under Different Stress Level - Ezio Todesco (CERN)  
9:30 AM The HL-LHC Superferric High Order Corrector Magnets: Series Production and Powering Tests Status - Dr Marco Statera (INFN Milano - LASA)  
9:45 AM Test result of a full-scale prototype of beam separation dipole magnet for the High-Luminosity LHC upgrade - Dr Michinaka Sugano (KEK)  
10:00 AM Fabrication and Power Test of last MCBXFB Magnets - Carla Martins Jardim (Centro de Investigaciones Energéticas, MedioAmbientales y Tecnológicas)  
8:30 AM
WED-OR2-302 HTS coil I - So Noguchi (Hokkaido University) Seungyong Hahn (Seoul National University) (until 10:30 AM)
8:30 AM Operation Results of a 23.5-T REBCO Magnet Prototype Towards a Tabletop Liquid-Helium-Free 1-GHz Microcoil NMR - Dongkeun Park (Massachusetts Institute of Technology)  
8:45 AM Metal-as-Insulation HTS Insert for Very-High-Field Magnet: A Test Report after Repairment - Jungbin Song (LNCMI-CNRS)  
9:00 AM Self-protecting behavior of an intra-Layer No-Insulation (LNI) REBCO coil under an LTS outer coil’s quench - Yu Suetomi (RIKEN)  
9:15 AM Quench Protection and Cyclic Fatigue Test Results for MTI Coils in the 40T All-superconducting Magnet Project at the NHMFL - Ernesto Bosque (National High Magnetic Field Laboratory)  
9:30 AM Hoop stress test of four-stacked two-ply REBCO pancake coils - Dr Kohki Takahashi (Tohoku University)  
9:45 AM Development of ReBCO Insert Solenoids for Its High Field Application Performance Verification - Huan Jin  
10:00 AM Successful demonstration of the first CORC® cable insert solenoid in 14 T background magnetic field operating at currents exceeding 4 kA, current densities of over 250 A/mm2, and 275 MPa source (JBR) stress - Jeremy Weiss (Advanced Conductor Technologies and University of Colorado, Boulder)  
10:15 AM Bi-2212 Coil Technology - Ulf Trociewitz (Applied Superconductivity Center/National High Magnetic Field L)  
8:30 AM
WED-OR2-703 Mechanical Behavior and Coil Tests - HIdetoshi OGURO (Tokai University) Hyung-Seop Shin (Andong National University) (until 10:30 AM)
8:30 AM Real-time Field Mapping of Screening Current induced Fields in an HTS Pancake Coil using a Hall Sensor Array - Jeseok Bang (Seoul National University)  
8:45 AM NI test coil program at the Paul Scherrer Institute - Jaap Kosse (PSI - Paul Scherrer Institute)  
9:00 AM Non-uniform screening-current-induced mechanical strains in small-scale REBCO insert coils - Ms Yufan Yan (Tsinghua University)  
9:15 AM Method of Manufacturing Fast Ramping Non-Insulated HTS Pancake Coils - Dr Matthias Mentink (CERN)  
9:30 AM Bending strain sensitivity of critical current in REBCO CC windings with different pitches on a large diameter former under static fatigue condition at 77 K - Michael De Leon (Andong National University)  
9:45 AM Mechanical strength evaluation of Yoroi-coil structured non-circular REBCO pancake coil in high magnetic field - Mr Tomonori Watanabe (Chubu Electric Power co., inc.)  
10:00 AM Mechanical Analysis of a 14 T Whole-Body MRI Magnet - Dr XiaoGang Liu (Institute of Plasma Physics)  
10:15 AM Design and test results for a canted-cosine-theta dipole subscale magnet series - Diego Arbelaez (Lawrence Berkeley National Laboratory)  
10:30 AM
WED-PO2-105 Accelerator Magnets III: undulators and related magnets (until 12:30 PM)
10:30 AM [Invited] Stability of Nb3Sn Superconducting Planar Undulator for ANL Advanced Photon Source - Daniele Turrioni (FNAL (US))  
10:30 AM Design, Fabrication, and Testing of a 1.9 m Long, 16.5 mm Period NbTi Superconducting Undulator for the Advanced Photon Source Upgrade - Matthew Kasa (Argonne National Laboratory)  
10:30 AM Phasing Magnet for CSX-2 beamline at NSLS-II - Marco Musardo (Brookhaven National Laboratory)  
10:30 AM Status Report of Sirius Delta Undulator - Vitor Soares (Brazilian Center for Research in Materials and Energy)  
10:30 AM The Fabrication Technology and Test Results of the NbTi Superconducting Racetrack Magnet - Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:30 AM THE MAGNETIC FIELD MEASUREMENT SYSTEMS FOR Pr2Fe14B Based CRYOGENIC UNDULATOR AT HEPS - Ms wan chen (Insitute of High Energy Physics CAS CN)  
10:30 AM Thermal-structural analyses on magnetic structure of the CPMU prototype in SSRF - Jian Wang (Huazhong University of Science and Technology (HUST))  
10:30 AM
WED-PO2-107 Accelerator Magnets V: LTS (until 12:30 PM)
10:30 AM Design of 6T superconducting solenoid system for spin polarization control at NICA collider - Dr Valery Lyssenko (FIAN) Prof. Eugeny Demikhov (FIAN ) Mr Aleksandr Rybakov (Fian)  
10:30 AM Design of a large aperture Canted Cosine Theta (CCT) combined function curved superconducting bending magnet - Jiaqi Lu (Institute of Modern Physics, Chinese Academy of Sciences)  
10:30 AM Energization and Magnetic Field Mapping Results of Cold Iron Quadrupole Triplet for Vertical Pre-Separator of the Facility for Rare Isotope Beams - Yoonhyuck Choi (Facility for Rare Isotope Beams, Michigan State University )  
10:30 AM Industrial production of superconducting magnets for the FAIR SIS100 accelerator - Dr Wolfgang Walter (Bilfinger Noell GmbH)  
10:30 AM Magnetic Field Shielding with Superconductors - yoshihisa iwashita  
10:30 AM Performance of 7 T dry solenoid for THz spectroscopy - Aleksei Bragin (Budker Institute of Nuclear Physics (RU))  
10:30 AM Superconducting Curved Canted-Cosine-Theta (CCT) Nested and Combined Error Free Dipole Quadrupole Fields Coil Geometry for the HIE-ISOLDE Recoil Separator Ring Project. - Glyn Kirby (CERN)  
10:30 AM
WED-PO2-111 High Field Accelerator Magnets II: Hybrid and HTS (until 12:30 PM)
10:30 AM 20 T Hybrid Nb3Sn-HTS Block-coil Design for a Future Particle Collider - Etienne Rochepault (Université Paris-Saclay (FR))  
10:30 AM 3D Conceptual Design of R2D2, the Research Racetrack Dipole Demonstrator - Dr Etienne Rochepault (Université Paris-Saclay (FR))  
10:30 AM Cloverleaf dipole demonstrator magnet with 2-tape ReBCO stack conductor - Thomas Nes (Twente Technical University (NL))  
10:30 AM Conceptual design optimization of a 20 T hybrid cos-theta dipole superconducting magnet for future High-Energy particle accelerators. - Vittorio Marinozzi (FNAL)  
10:30 AM First canted cosine theta Bi-2212 accelerator magnets: Fabrication, performance, and prospects - Tengming Shen (Lawrence Berkeley National Lab)  
10:30 AM Magneto-Mechanical Optimization of Cross-sections for cos $\theta$ Accelerator Magnets - Giorgio Vallone (Lawrence Berkeley National Lab. (US))  
10:30 AM Proof-of-Principle Demonstration of a Novel Overpass/Underpass High Field Dipole - Ramesh Gupta (BNL)  
10:30 AM
WED-PO2-114 Particle Detector Magnets (until 12:30 PM)
10:30 AM A complete magnetic design for the DUNE ND-GAr solenoid magnet - Andrea Bersani  
10:30 AM CERN North Area Multi-Purpose Superconducting Magnet Facility - Shuvay Singh (CERN)  
10:30 AM Design and Manufacture of two High Gradient Quadrupoles based on Permanent Magnets for the Antiproton Decelerator - Pierre Alexandre Thonet (CERN)  
10:30 AM Designing a Large-gap Superferric Dipole Magnet for CEE - wei you (Institute of Modern Physics, Chinese Academy of Sciences)  
10:30 AM Magnetic Measurement and Cold Test Results of the Mu2e Transport Solenoid Coils - Karie Badgley (Fermilab)  
10:30 AM Manufacture of the Proton Electron Radiation Channel (PERC) installed at the Research Neutron Source FRM II - Philipp Revilak (Bilfinger Noell GmbH)  
10:30 AM Software Architecture and Hardware Organization in Mu2e Solenoid Field Mapping System - Dr Jerzy Nogiec (Fermilab)  
10:30 AM Superconducting magnets for antimatter traps or neutron traps – designed and manufactured in industry - Mr Hong Wu (Bilfinger Noell GmbH)  
10:30 AM
WED-PO2-116 Resistive acclerator magnets I (until 12:30 PM)
10:30 AM 3D modeling of the decapole corrector for the FAIR project - Kseniia Riabchenko  
10:30 AM A New Branching Point and Primary Beam Line at the J-PARC Hadron Experimental Facility - Mrs Erina Hirose (Institute of Particle and Nuclear Studies, High Energy Accelerator Research Organization)  
10:30 AM Analysis of Coupled Electromagnetic Thermal Effects of Scanning Magnet for SESRI - Jia-Qi Lu (Institute of Modern Physics, Chinese Academy Sciences)  
10:30 AM Design, Manufacture and Measurement of three Permanent Magnet Dipoles for FASER Experiment - Pierre Alexandre Thonet (CERN)  
10:30 AM Development of Radiation-Resistant Warm Magnets using Cyanate Ester Resin - Prof. Hitoshi Takahashi (Institute of Particle and Nuclear Studies, High Energy Accelerator Research Organization)  
10:30 AM The Pole Profile Optimization of High-gradient Quadrupole for the HALF Storage Ring - Yuan Chen (University of Science and Technology of China)  
10:30 AM
WED-PO2-204 Fusion IV: HTS conductors and coils (until 12:30 PM)
10:30 AM Conceptual Design and AC Loss Analysis of an HTS Central Solenoid Winding Pack for the EU-DEMO Fusion Reactor - Dr Xiaodong Li (Chair of Nuclear Technology, Department of Mechanical Engineering, Technical University of Munich)  
10:30 AM Conductor design for toroidal field coils of a high magnetic field tokamak TRT. - Dr Sergey Lelekhov (ITER Design Center)  
10:30 AM Design and manufacturing of a KIT sample for a Quench Experiment on HTS Cable in Conduit Conductors - Daniel Nickel (Karlsruhe Institute of Technology (KIT))  
10:30 AM High Performance HTS Conductors for Compact Fusion Tokamak Facility - Dr Yuhu Zhai (Princeton Plasma Physics Laboratory)  
10:30 AM Novel HTS magnet design for nuclear fusion - Quan Li (University of Edinburgh)  
10:30 AM Numerical Modelling of AC loss in large HTS Coils - Dr Jeroen van Nugteren (LittleBeast Engineering)  
10:30 AM Preliminary Design Study on HTS Toroidal Field Coils Using Non-Twisted Conductors and Cables - Young-Gyun Kim (Korea Institute of Fusion Energy)  
10:30 AM The Study on Excitation Loss of NI Coil for TF Magnets - Xueliang Wang (Shanghai Jiao Tong University)  
10:30 AM
WED-PO2-306 Resistive and Pulsed High-Field Magnets (until 12:30 PM)
10:30 AM Design of a new type of power supply similar to flat-top pulsed high magnetic fields - Wei Fei (High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei,China)  
10:30 AM Design of an Active Power Compensator for 60T Flat-top High Magnetic Field System - Dake Li (Huazhong University of Science and Technology)  
10:30 AM Design of Pulsed Magnet for Adjusting the Residual Stress Field in Large-size Aluminum Alloy Rings - Yinghao Tang (Huazhong University of Science and Technology)  
10:30 AM Energy efficiency of resistive high field magnets – the role of magnet technology and power supply operation - Kévin Paillot (Univ. Grenoble Alpes, INSA Toulouse, Univ. Toulouse Paul Sabatier, EMFL, CNRS, LNCMI, France)  
10:30 AM Long Time Thermal Stability and Radiation Resistance of Nanostructured Microcomposite Wires Based on Cu-Nb Alloy - Prof. Viktor Pantsyrny (Nanoelectro LLC)  
10:30 AM Microanalysis of Glidcop® conductor, an alumina particle dispersion strengthened copper, for ultrahigh field pulsed magnet applications - Dr Jun Lu  
10:30 AM Numerical simulation and experimental study on the composite process of electromagnetic and electro-hydraulic tube forming - Yi Zhang (Huazhong University of Science and Technology)  
10:30 AM Relaxation of residual stress in the aluminum alloy ring by electromagnetic bulging method - Dr Xiaoxiang Li (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)  
10:30 AM The research on the thermal deformation of Cu-Nb composites - Mr pengfei Wang (Northwest Institute for Nonferrous Metal Research)  
10:30 AM Toward energy-efficient multi-step electromagnetic forming process by using a curved-geometry field shaper: Principle, Prototype Design, and Experiments - Mr Zixuan Zhang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)  
10:30 AM Toward flexible coil design for electromagnetic forming of both sheet and tubular metal by combining of coil and field shaper: Principle, Optimization, and Experimental validation - Meng Li (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)  
10:30 AM
WED-PO2-403 Magnets for Medical App II (until 12:30 PM)
10:30 AM AC loss simulation in HTS coil windings coupled with an iron core - Ms Yue Wu (Beijing Jiaotong University)  
10:30 AM Design of a 14T cryogen-free physical property measurement system magnet - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Yaohui Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:30 AM Numerical Evaluation on Mechanical Behavior of No-insulation REBCO Pancake Coils in Skeleton Cyclotron - Yuta MIYAKE (Okayama University)  
10:30 AM Numerical Evaluation on Quench Behavior of REBCO Coil System of Skeleton Cyclotron for Cancer Therapy - Mr Yuki NAKAI (Okayama University)  
10:30 AM Optimal Design for Permanent Magnet Distribution of the Tip of Flexible Endoscope Driven by Magnetic Navigation - Hongbo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences) Jianhua Liu (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences)  
10:30 AM Semiellipse Coil Pair with Eccentric Windings for Improved Intracranial Induced Electrical Field in Transcranial Magnetic Stimulation - Mr Jiannan Shao (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)  
10:30 AM Simulation of the Magnetic Particle Trajectory in a Vein for MDDS Application - Mr Jyun-Rong Huang (National Cheng Kung University)  
10:30 AM Thermal-electrical coupling quench study of HTS cyclotron for medical application - Mr Jian Zhou (ASIPP,China) Dr Kaizhong Ding (Institute of Plasma Physics, Chinese Academy of Sciences)  
10:30 AM
WED-PO2-505 Special Purpose magnets II: Induction Heating, Magnetic Refrigeration & other applications (until 12:30 PM)
10:30 AM Conceptual design of the mobile cryomagnets for novel microwave technologies - Prof. Vitaly Vysotsky (Russian Scientific R&D Cable Institute)  
10:30 AM Development of Induction Heating Device Using HTS Magnet in Aluminum Extrusion Processing - Tetsuya Ito (Teral Inc., Niigata University)  
10:30 AM Development of static magnetic refrigeration system using multiple high-temperature superconducting coils - Prof. Naoki HIRANO (核融合科学研究所)  
10:30 AM Magnet design for electron-beam additive manufacturing - Dr ye bai (GE Global Research Center)  
10:30 AM Recent Development Trends of a 1.2 MW Superconducting Induction Heater using MgB2 NI Magnets - Jongho Choi (Supercoil Co., Ltd.)  
10:30 AM The Calculation of Electromagnetic Force In Crystallizer About Using The High-temperature Superconducting Electromagnetic Stirring Device - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Cong Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and Ganjiang Innovation Academy, Chinese Academy of Sciences)  
10:30 AM The Calculation of The Heating Efficiency About Using The High-temperature Superconducting Induction Heating Device To Heat The Medium and Low-carbon Steel and Alloy Steel - Cong Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and Ganjiang Innovation Academy, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:30 AM
WED-PO2-507 Superconducting Rotating Machines, Linear Machines, and Related Subjects II (until 12:30 PM)
10:30 AM A Double-Stator Single-Rotor Field Modulated Motor with HTS Bulks - Weizhao Tang (China Three Gorges University)  
10:30 AM A New Structure for the Coaxial Magnetic Gear with HTS Bulks - Prof. Libing Jing (China Three Gorges University)  
10:30 AM A Novel HTS Magnetic Field Modulation Type Magnetic Gear Hybrid Motor With Irregular Halbach Array - Yonglin Pan (China Three Gorges University)  
10:30 AM Concept Design of a Novel Superconducting PTO Actuator for Wave Energy Extraction - Luis Garcia-Tabares (Centro de Investigaciones Energéti cas Medioambientales y Tecno)  
10:30 AM Flywheel uninterruptible power supply using superconducting induction machine - Shota Kuki (Sophia University)  
10:30 AM Influence of the Stator Substrate Magnetism on the Charging Performance of Dynamo-type HTS Flux Pump - Chenzhen Sun (Southwest Jiaotong University, Chengdu, China)  
10:30 AM Investigation of AC Loss Characteristics of REBCO Armature Developed for 50 kW-class HTS Induction/Synchronous Motor - Satoshi Fukui (Niigata University)  
10:30 AM Numerical Modeling and Optimization of an Axial-type Synchronous Motors with Bulk HTS - Yuanyuan Xu (Guangdong Ocean University)  
10:30 AM Parametric study on starting method with fast torque response in high-temperature superconducting induction/synchronous motor - Prof. Taketsune Nakamura (Kyoto University)  
10:30 AM Robust and low-loss high temperature superconducting armature winding technology to realize a practical fully superconducting rotating machine: from the viewpoint of self-organizing design method and FFDS conductor technique - Prof. Taketsune Nakamura (Kyoto University)  
10:30 AM Study of REBCO Trapezoidal Armature Windings for Superconducting Induction Motor - Yuta Okade (Kyushu University)  
10:30 AM Study on the structure design for high performance non-contact rotating machine using HTS bulks - Tomo Hirata (Okayama University)  
10:30 AM The Potential for the Use of Low AC Losses Hyperconducting Aluminum in Cryogenic Motors - Mr Jin Kwon (The Ohio State University)  
10:30 AM The Test Results of a YBCO Racetrack Coil at 30K Incorporate a Novel Cryostat Suitable for a Linear-Motor Type Flux Pump Used on an Synchronous Motor - Hong Li (Sichuan University)  
10:30 AM
WED-PO2-510 Maglev and Levitation II (until 12:30 PM)
10:30 AM AC losses of high temperature superconducting magnet under the external magnetic fields generated by the ground coils of electrodynamic suspension train - Tianyong Gong (Southwest Jiaotong University)  
10:30 AM Design, fabrication and testing of a coated superconductor magnet for electrodynamic suspension - Guangtong Ma (Southwest Jiaotong University)  
10:30 AM Dynamic Response of HTS Pinning Maglev System Under High Frequency Excitation - Li Wang (Southwest Jiaotong University)  
10:30 AM High Temperature Superconducting Non-insulation Closed-loop Coils for Electro-dynamic Suspension System - LI LU (Shanghai Jiao Tong University)  
10:30 AM Influence of Traction Rod on the Dynamic Performance of High-temperature Superconducting Maglev Vehicle - Jianhui Liu (SouthWest JiaoTong University)  
10:30 AM Larger Levitation Force Design of Magnetic Levitation Rail based on Topology Optimization of Halbach Array - Jianwei Li (Suzhou Inn-Mag New Energy Ltd)  
10:30 AM Levitation characteristics of high-temperature superconducting bulks under different orientations and arrays - Mr Yanxing Cheng (Southwest Jiaotong University)  
10:30 AM Multi-Mode Vibration Suppression of High-Temperature Superconducting Maglev System Via Negative Resistance Electromagnetic Shunt Damper - Penghui Zhang (SouthWest JiaoTong University)  
10:30 AM Multi-objective Optimization Design for Null-flux Superconducting Electrodynamic Suspension Using NSGA-II and Response Surface Method - Libin Cui (Southwest Jiaotong University)  
10:30 AM Off-Power Operation of prototype on-board HTS Magnets for EDS-type Maglev Trains - Wei Wu (Shanghai Jiao Tong University)  
10:30 AM Vertical Dynamic Response of Vehicle-bridge Coupled Systems in Superconducting Electrodynamic Suspension Train - Piji Feng (Southwest Jiaotong University)  
10:30 AM
WED-PO2-604 Low Tc Wires and Cables (until 12:30 PM)
10:30 AM Cable R&D Program for 14T MRI - Yongliang Zhang (Institute of Plasma Physics)  
10:30 AM Effect of the sub-elements layout on the electro-mechanical properties of high Jc Nb3Sn wires under transverse load - Dr Dario Baffari (CERN)  
10:30 AM Effect of transverse compressive stress on Nb3Sn Rutherford cables for accelerator magnets - Dr Gilles Lenoir (CERN)  
10:30 AM Influence of reversible vortices motion on low-field features of magnetization in type-II superconductors with strong anisotropic pinning - Valentin Guryev (NRC Kurchatov institute)  
10:30 AM Influence of Ti doping on the Nb3Sn layer formation for various Nb3Sn wire structure - Taro Morita  
10:30 AM Influence of Zn addition in Cu matrix on the mechanical and superconducting properties of Nb$_3$Sn conductor - Dr Mukesh Dhakarwal (High Energy Accelerator Research Organization/KEK)  
10:30 AM Jc performance under the transverse compressive stress on the bronze matrix reinforced Nb3Sn multifilamentary wires - Prof. Yoshimitsu Hishinuma (National Institute for Fusion Science)  
10:30 AM Magnetic and Electromechanical Characterization of a High-Jc RRP wire for the MQXF Cable - Gianluca De Marzi (INFN e Laboratori Nazionali di Frascati (IT))  
10:30 AM Mechanical properties and strain effect of various Nb3Al superconducting wires - Mr Yutaro Wakutani (Tokai university)  
10:30 AM Microstructure and superconducting properties of Hf,Ta-added bronze-route Nb3Sn wire - Dr Nobuya Banno (National Institute for Materials Science)  
10:30 AM Procedural solutions for determining the temperature dependence of transport critical current in Nb3Sn superconducting wires using magnetization measurements - Dr Ian PONG (LBNL)  
10:30 AM Study on the Optimum Microstructure of High Jc Nb3Sn Wire after medium heat treatment - Qiang Guo (WST)  
10:30 AM The Nb3Sn superconductor procured for the High Luminosity Upgrade of the Large Hadron Collider - Dr Bernardo Bordini (CERN)  
10:30 AM Unique and Novel High Tin Bronze and Nb3Sn Multifilamentary Wires - Mr Hiroyasu Taniguchi (Osaka Alloying Works, Co., Ltd.)  
10:30 AM
WED-PO2-607 Coated Conductor Processing and Flux Pinning (until 12:30 PM)
10:30 AM Effect of 2 and 10 MeV Au-ion irradiation on superconducting properties in GdBa2Cu3Oy coated conductors - Prof. Toshinori Ozaki (Kwansei Gakuin University)  
10:30 AM Features of the formation of pinning centers in HTS tapes under the laser irradiation action - Anishcenko Irina (NRNU MEPHI)  
10:30 AM Investigation of the formation mechanism of a-axis oriented grains in GdBa2Cu3Oy coated conductors deposited by pulsed laser deposition - Prof. Teranishi Ryo (Kyushu Univ.)  
10:30 AM Magnetic flux trapping and creep in 2G HTS wires containing normal-phase fractal clusters - Dr Yuri Kuzmin (Ioffe Physical Technical Institute of the RAS)  
10:30 AM Modification of critical current density properties in high-Tc superconductors by tuning columnar defect morphologies in different directions - Tetsuro Sueyoshi (Kyushu Sangyo University)  
10:30 AM Superconducting properties of Ce and La co-doped RE123 thin films fabricated by fluorine-free MOD method - Mr Taishi Hatano (Tokyo Metropolitan University)  
10:30 AM Superconducting properties of production 2G HTS wires based on YBCO with Y2O3 nanoparticles in magnetic field up to 16 T - Dr Pavel Degtyarenko (S-innovations LLC)  
10:30 AM
WED-PO2-610 High Tc Wires and Cables IV (until 12:30 PM)
10:30 AM Behavior of Bi-2212 wires above liquid Helium temperature: critical current, irreversibility field and filaments coupling - Dr Achille Angrisani Armenio (ENEA)  
10:30 AM Critical Current Analysis of a Self-shielding DC HTS Cable with a “Sandwich” Structure - Ziyuan Sun (NCEPU) Ruiqi Wang (North China Electric Power University) Zhaoyu Zhang (North China Electric Power University) Yu Yang (North China Electric Power University) Wei Pi (North China Electric Power University)  
10:30 AM Degradation Behavior due to Flatwise and Edgewise Bending of Critical Current of BSCCO Tapes - Prof. Kozo Osamura (Research Institute for Applied Sciences)  
10:30 AM Effect of Twisting Characteristics on Critical Current of Bi-2212 superconducting wire - Dongsheng Yang (Hefei Institutes of Physical Science, Chinese Academy of Scienc)  
10:30 AM Inter-wire contact force induced critical current degradation of Bi-2212/Ag round wires reacted with and with no pre-pressure - Peng Gao (Institute of Plasma Chinese Academy of Sciences)  
10:30 AM Magnetization measurements of Bi-2212 Rutherford cable using a ± 3-T magnetometer - Shengchen Xue (OSU)  
10:30 AM Modeling of AC loss characteristics under electromagnetic conditions in High-temperature superconducting cable - Jun Ogawa (Niigata University)  
10:30 AM Use of Critical Current Distribution Measurements in Bi-2212 Round Wires as a tool to significantly enhance and stabilize the $J_{\text{c}}$ properties - Shaon Barua (ASC-FSU-NHMFL)  
10:30 AM
WED-PO2-613 Joints between Superconductors (until 12:30 PM)
10:30 AM Air-gap Observation in Joints of REBCO Tapes by Use of X-ray Computed Tomography - Prof. Masayoshi Inoue (Fukuoka Institute of Technology)  
10:30 AM Application of direct diffusion bonding technique for preparation of low-resistivity joint in REBCO coated conductors - Noriko Chikumoto (Chubu University)  
10:30 AM Development of a demountable joint for NUCLOTRON type cable - Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)  
10:30 AM Effect of precursor film thickness and heat-treatment temperature on superconducting joint - Yutaro Doi (Kyushu university)  
10:30 AM Electrical and Thermal Contact Resistance in ReBCO Stacks and Cables with Modified Surfaces - Shengchen Xue (OSU)  
10:30 AM Evaluation of magnetic field dependence of interface resistivity in REBCO tape with the contact-probing current transfer length method - Yosuke Atake (Dept. Quantum Science and Energy Engineering. Graduate School of Engineering. Tohoku University)  
10:30 AM Formation of Nb3sn after Different Mechanical Alloying Methods - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:30 AM In-field evaluation of REBCO superconducting joint - Kensuke Kobayashi (National Institute for Materials Science)  
10:30 AM Joint resistance evaluation of longer HTS tape joints with indium insertion - Dr Satoshi Ito (Dept. Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University)  
10:30 AM Low resistance soldered joint of REBCO coated conductors with novel Ag-dispersed structure - Mr Masaki Ohsugi (Fujikura Ltd.)  
10:30 AM Simultaneous manufacturing of multiple junctions between Bi2223 tapes with rapid melt joining - Shintetsu Kanazawa (Muroran Institute of Technology)  
10:30 AM Status and Progress on First-of-a-Kind Feeder Busbar Joint Assembly at ITER Magnet System - Dr HYUNGJUN KIM (ITER Organization)  
10:30 AM Superconducting Joint for “Reacted” MgB2 multifilament Wires for the Development of MRI Magnets - Mr Dawool Kwon (Korea University)  
10:30 AM Ultra-low resistance joints between Bi2223 and NbTi wires using superconducting Bi-Pb solder - Dr Kazuo Inoue (National Institute for Materials Science)  
10:30 AM
WED-PO2-616 Electrical Insulation for Magnets (until 12:30 PM)
10:30 AM Current Bypass of a Metal Stitching Smart Insulation 2G HTS Coil - Hyung-Wook Kim (Korea Electrotechnology Research Institute)  
10:30 AM Electrical Characteristics of a High-Temperature Superconducting Coil Insulated with Doped Smart Materials - Mr Mohamed Mussa Mtangi (Korea University)  
10:30 AM Evaluation of Selection Criteria for the Level of Liquid Nitrogen in HTS Magnet System - Mr Seungmin Bang (Hanyang University)  
10:30 AM Fabrication and Characteristics of HTS Racetrack Pancake Coils after Impregnation Process Using Various Materials - Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:30 AM Fundamental research for design of composite materials in vacuum environments - Mr Masaaki Hirai (Fukui University of Technology)  
10:30 AM Magnetic Field Reduction Phenomenon of a Metal Insulation and a No-insulation Coil by External Fluctuating Magnetic Field - Hyung-Wook Kim (Korea Electrotechnology Research Institute)  
10:30 AM Mechanical characterisation of Nb3Sn cable insulation systems at ambient and cryogenic temperature used for HL-LHC accelerator magnets. - Arnaud Pascal Foussat (CERN)  
10:30 AM Novel Insulation Designs for Nb<sub>3</sub>Sn Rutherford Cables for Particle Accelerator Magnets - Giorgio Vallone (Lawrence Berkeley National Lab. (US))  
10:30 AM Preliminary Design of Insulation System for Superconducting Conductor Testing Facility - Yuanyuan Ma  
10:30 AM Surface Dielectric Characteristics of GFRP and PTFE in Cryogenic Environment under the Switching Impulse Superimposed on DC Voltage - Mr Hoseung Kim (Hanyang.ac.kr)  
10:30 AM Trap Energy Distribution of PPLP according to PP ratio at cryogenic temperature - Mr Yongrok Kim (Hanyang University)  
10:30 AM Varistor Insulation for HTS Magnets - Dr Tom Galvin (M&I materials ltd) Glyn Kirby (CERN)  
10:30 AM
WED-PO2-706 Quench Detection II (until 12:30 PM)
10:30 AM A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab - Artur Galt (Fermi National Accelerator Laboratory (FNAL))  
10:30 AM Application of the Universal Quench Detection System to the Protection of the High-Luminosity LHC Magnets at CERN - Jens Steckert (CERN)  
10:30 AM Conceptual Design of Multi Power Receivers for Wireless Power Supply of Quench Detector with Highly Insulating Stability under Superconducting High Field Magnet - Yoon Do Chung (Suwon Science College)  
10:30 AM Lifetime Studies of Electrolytic Capacitors Installed in the Protection Systems of the Superconducting Magnets in the Large Hadron Collider at CERN - Dr David Carrillo (CERN)  
10:30 AM Numerical Model Development for CFETR CSMC Quench Detection System - Dr Teng Wang (Institute of Plasma Physics, Chinese Academy of Sciences)  
10:30 AM Primary quench detection analysis for DTT Central soledoid (CS) and polidal field coils (PF) - Luigi Morici (ENEA)  
10:30 AM Processing of the quench detection signals for CS model coil of CFETR - Dr Teng Wang (Institute of Plasma Physics, Chinese Academy of Sciences)  
10:30 AM Protection strategy and quench study of MCBXF magnets - Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno)  
10:30 AM Quench Detection and Voltage Spikes Analysis of the FECR Half-scale Nb3Sn Superconducting Magnet - Xianjin Ou (Institute of Modern Physics, CAS)  
10:30 AM
WED-PO2-709 No-Insulation Coils (until 12:30 PM)
10:30 AM Analysis of the Defect-Irrelevant behavior of a No-Insulation HTS pancake coil including multiple superconductive joints - Andrea Musso (University of Bologna)  
10:30 AM Behaviour prediction of parallel co-wound no-insulation HTS coil - Pengbo Zhou (Southwest Jiaotong University)  
10:30 AM Current and temperature distributions in HTS coils with and without insulation in a layer-wound configuration - Andrea Musso (University of Bologna)  
10:30 AM Current behaviors of NI REBCO pancake coil wound with multi-bundled conductors during charging and against local normal state transition. - Kazuma Kodaka (Hokkaido University)  
10:30 AM Long-Term Operation Results of a Stack of Metal Insulation HTS Pancake Coils for SMES Applications - Chaemin Im (Seoul National University)  
10:30 AM Numerical evaluation of electromagnetic behavior of multi-stacked no-insulation REBCO coil system assuming applications to high-field whole-body MRIs and medical cyclotrons - Ui Nemoto (Waseda University)  
10:30 AM Numerical evaluation of transient thermal stability of no-insulation pancake coil wound with REBCO coated conductor with some defects - Kyoka Tsuyoshi (Waseda University)  
10:30 AM Numerical evaluation of transient thermal stability of no-insulation REBCO pancake coils with non-contact area between turns - Mayu Kitamura (Waseda University)  
10:30 AM Quench Protection Test Results of an HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin - Mr Tatsuro Uto (Toshiba Energy Systems & Solutions Corporation)  
10:30 AM The study of overcurrent excitation for NI HTS coils - Yusong Gao (Shanghai Jiao Tong university)  
10:30 AM Thermal Stability Analysis of No-insulation Magnet under Dynamic Operational Conditions - Pu Duan (Huazhong University of Science and Technology)  
10:30 AM
WED-PO2-712 Losses in HTS conductors (until 12:30 PM)
10:30 AM AC loss measurement of a tri-axial superconducting cable based on a digital compensation method - Jiahui Zhu (China Electric Power Research Institute)  
10:30 AM AC loss of HTS coils wound with various types of CORC - Mr Jinwoo Han (Korea Polytechnic University)  
10:30 AM Analysis of AC losses in coated conductor stack cables for fusion magnets - Dr Davide Uglietti (Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-5232 Villigen PSI, Switzerland)  
10:30 AM Coupling time constant measurements and analyses of spiral copper-plated multifilament coated conductors - Mao Shigemasa (Kyoto University)  
10:30 AM Coupling time constant measurements of short pieces of copper-plated multifilament coated conductors at 4.2 K and 77 K - Hirokazu Fujita (Kyoto University)  
10:30 AM Development of large-scale numerical electromagnetic field analysis model for SCSC cables - Dr Yusuke Sogabe (Kyoto University)  
10:30 AM Dynamic loss and magnetization loss of HTS coated conductors with magnetic substrate - Jintao Hu (University of Cambridge)  
10:30 AM Highly sensitive measurement of AC loss characteristics of short and straight HTS tapes under transverse magnetic fields by a pickup coil method - Dr Shuma KAWABATA (Kagoshima University)  
10:30 AM Modelling of magnetization loss of CORC cables with three material laws and comparison with measurements - Dr Milan Kapolka (University of Leicester)  
10:30 AM Numerical Study on AC Loss in Quasi-Isotropic Superconducting Strand at Liquid Helium Temperatures - Ruiqi Wang (North China Electric Power University)  
10:30 AM
WED-PO2-716 Mechanical Behavior of Coil II (until 12:30 PM)
10:30 AM Comparative Analysis of MAXFAP1b Coils with respect to Magnet Training Behavior. - Steve Krave (Fermilab)  
10:30 AM Internal strain responses of YBCO superconducting taps based using embedded and distributed FBGs under tensile，compression and bending loading - Mr Pengnian Zhang  
10:30 AM Mechanical Design of the Mirror Structure for the full-length Nb3Sn Sextupole Coil of 45 GHz ECR Ion Source - Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences) Li Zhu (Institute of Modern Physics, Chinese Academy of Sciences)  
10:30 AM Mechanical validation of the Combined Support Structure for FECR Nb3Sn Superconducting Magnet Prototype - Beimin WU (Institute of Modern Physics, Chinese Academy of Sciences)  
10:30 AM Preliminary strain measurement in high field superconducting magnets with fiber Bragg gating (FBG) - Zhen Zhang (Institute of High Energy Physics, Chinese Academy of Sciences)  
10:30 AM Various methodologies used in the mechanical analysis of TF coils for EU DEMO - Mr Jose Bennet (CEA French Alternative Energies and Atomic Energy Com)  
10:30 AM
WED-PO2-718 Design and Analysis I (until 12:30 PM)
10:30 AM A FEM/BEM scalar potential formulation for 3D nonlinear magnetostatic analysis in superconducting accelerator magnets, implemented in PITHIA-EM software - Mr Dimitris Rodopoulos (University of Patras)  
10:30 AM Analyses of Transient Electrical Behavior and Thermal Stability in No-Insulation REBCO Pancake Coils Using Electromagnetic-thermal Model - Mr Quanyue Liu (Regional Leading Research Center, Changwon National University)  
10:30 AM Dynamic magnetic hysteresis modeling based on improved parametric magneto-dynamic model - Long Chen (China Three Gorges University)  
10:30 AM Electromagnetic Analysis of DTT Central Solenoid and Poloidal Field coils - Giuseppe Messina (ENEA)  
10:30 AM High-performance simulation of the magnetic field in superconducting magnets using domain decomposition algorithms in the Sparselizard open source FEM library - Alexandre Halbach (Tampere University)  
10:30 AM High-temperature superconducting cable optimization design software based on 2-D electromagnetic thermal analysis model - Jiajie Long (Huazhong University of Science and Technology)  
10:30 AM Nonlinear magnetic field analysis in superconducting accelerator magnets via a new FPM/BEM scheme, implemented in PITHIA-EM software - Mr Dimitris Rodopoulos (University of Patras)  
10:30 AM Numerical Optimization of Electromagnet Current Distribution in Superconducting Linear Acceleration System - Teruou Takayama (Yamagata University)  
10:30 AM Screening current simulation of REBCO pancake coils considering coil deformation - Thomas Kurauchi (Hokkaido University)  
10:30 AM Suspension characteristics Analysis on Three-degree-of-freedom Bearingless Switched Reluctance Motor - Zixin Wang (Huaiyin Institute of Technology)  
10:30 AM
WED-PO2-721 Novel Diagnostics (until 12:30 PM)
10:30 AM An Induction-Coil Measurement System for Normal- and Superconducting Solenoids - Dr Carlo Petrone (CERN)  
10:30 AM Characterizing performance degradation through the analysis of V-I measurements in Nb3Sn accelerator magnets - Ruben Keijzer (University of Twente)  
10:30 AM Distributed fiber optic sensing to identify locations of resistive transitions in REBCO conductors and magnets - Linqing Luo (Lawrence Berkeley National Laboratory)  
10:30 AM Flex-PCB quench antenna developments at FNAL - Stoyan Stoynev (FNAL (US))  
10:30 AM Progress Towards Hall Sensor-Based Quench Detection in CORC® Cables - Reed Teyber (Lawrence Berkeley National Laboratory)  
10:30 AM Verifying the method to estimate local critical currents in the HTS coil by means of Pick up coils - Mr Junya Omura (Kagoshima University)  
10:30 AM
WED-PO2-723 Moel Coil II & Test Facilities (until 12:30 PM)
10:30 AM [Invited] A subscale canted cosθ dipole magnet using high-temperature superconducting STAR™ wires - Xiaorong Wang (Lawrence Berkeley National Laboratory)  
10:30 AM A Simple Calculation Method for Center Magnetic Flux Density of a Magnetic Core Electromagnet with a Wide Air-Gap - XU HANG  
10:30 AM Assembly and mechanical analysis of the Canted-Cosine-Theta subscale magnets - Jose Luis Rudeiros Fernandez (LBNL)  
10:30 AM Current Status of the Facility for High Field Cable Testing at Fermilab - Gueorgui Velev (FNAL)  
10:30 AM DC Performance of a Nb3Sn Rutherford Cable Solenoid Insert - Yongliang Zhang (Chinses Academy of Science)  
10:30 AM Development of an Iron-Based Superconductor Magnet: A Study on the 64 mm Diameter Iron-based Superconductors Coils - Dr Zhan Zhang  
10:30 AM Inductive Method for the Critical Current Measurements on the Aluminum stabilized cable - Ling Zhao (Institute of High Energy Physics, Chinese Academy of Sciences)  
10:30 AM Mechanical and seismic performance analysis of the dewar used for helium gas tightness test for CFETR conductor - Aihua Xu (institute of plasma physics Chinese academy of sciences)  
10:30 AM Persistent current mode operation of a cryocooler-cooled joint-less HTS magnet - Ms Miyeon Yoon (Korea Polytechnic University)  
10:30 AM Progress on the Design of the 15 T Magnet of the EDIPO Test Facility - Xabier Sarasola (EPFL-SPC)  
10:30 AM Sudden discharge measurement system and results for 100 mH class no-insulation coils - Konstantinos Bouloukakis (Victoria University of Wellington)  
7:00 AM --- Online Poster Sessions #3 *See the on-site poster session at 10:00 for presentation details* ---
8:00 AM --- Regitration ---
9:30 AM --- Award ---
10:00 AM
THU-PO3-108 Accelerator Magnets VI: LTS (until 12:00 PM)
10:00 AM DCT&CCT superconducting multiplets for HIAF-HFRS - Enming Mei (IMPCAS)  
10:00 AM Design and Test of a half-aperture Canted-Cosine-Theta multipole Prototype Magnet For the HIAF Fragment Separator - Dr Yu Liang (Institute of Modern Physics,Chinese Academy of Sicences)  
10:00 AM Designing and Manufacturing of the Fully Configured Multiplet for the Super-FRS at FAIR - Eun Jung Cho (GSI)  
10:00 AM Magnetic Design of the EIC IR Cable Magnets - Ramesh Gupta (BNL)  
10:00 AM Shell-based support structure for the 45 GHz ECR Ion Source MARS-D - Mariusz Juchno (LBNL)  
10:00 AM Study on Conduction Cooling of Superconducting Magnets for the ILC Main Linac - Hirotaka Shimizu (KEK)  
10:00 AM
THU-PO3-109 Accelerator Magnets VI: model analysis, impregnation (until 12:00 PM)
10:00 AM A preliminary study on a new epoxy resin system IR-3 for the high-field HTS applications - Huanli Yao (Institute of High Energy Physics, Chinese Academy of Sciences)  
10:00 AM Dipole magnets wound using YBCO cables - FEM stability issues modeling - Dr Milan Majoros (The Ohio State University)  
10:00 AM Introduction and results of the Bonding Experiments (BOX). - Michael Daly (PSI - Paul Scherrer Institute)  
10:00 AM Mechanical characterization of Glass Fiber Reinforced Polymers (GFRP) and resins submitted to ionizing radiations for future accelerator application - Tatsushi Nakamoto (KEK)  
10:00 AM
THU-PO3-112 HL-LHC Accelerator Magnets II: Nb3Sn (until 12:00 PM)
10:00 AM An examination of the mechanical performance of the 4.5 m long MQXFA Pre-Series magnets for the Hi-Lumi LHC Upgrade - Daniel Cheng  
10:00 AM Design of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project - Rodger Bossert (Fermi National Accelerator Laboratory)  
10:00 AM Fabrication of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project - Antonios Vouris (Fermilab)  
10:00 AM Fermilab’s Horizontal Test Stand Upgrade Overview and Commissioning - Guram Chlachidze (Fermilab)  
10:00 AM Superconducting coil stress specifications for the series production of the Nb3Sn MQXFA quadrupole magnets for the HL-LHC - Paolo Ferracin (LBNL)  
10:00 AM US-HiLumi Accelerator Upgrade Project Pre-series Cryo-Assembly 01 Production and First Results - Thomas Strauss (FNAL)  
10:00 AM
THU-PO3-117 Resistive acclerator magnets II (until 12:00 PM)
10:00 AM [Invited] Magnets for low Emittance Machines: An Overview - Pierre Schnizer  
10:00 AM Coupling Design of Focusing Function Bending Magnet and High Current Electron Beam for 100 kW Irradiation Accelerator - Tianjue Zhang (China Institute of Atomic Energy)  
10:00 AM Design and field performance of the octupole magnet with skew quadrupole component in HEPS - Dr Mei Yang (IHEP, CAS, China)  
10:00 AM Development of magnetic system for bending electron beam in industrial accelerator ILU-10 - Vadim Pavliuchenko (Budker Institute of Nuclear Physics of Siberian Branch Russian )  
10:00 AM Evaluation of eddy currents dependent on excitation pattern in design of pulse electromagnets. - Tomohiro Takayanagi (JAEA/J-PARC)  
10:00 AM Magnet Design of the Electron Cooling System for HIAF - LIXIA ZHAO (the Institute of Modern Physics,CAS)  
10:00 AM Magnet development for the BESSYIII multi bend achromat - Dr Jens Völker (Helmholtz-Zentrum Berlin (HZB))  
10:00 AM Magnetic Designs of New First Target Beamline Magnets for the ORNL SNS Upgrade - VLADIMIR KASHIKHIN (Fermilab)  
10:00 AM
THU-PO3-205 Fusion V: Toward DEMO (until 12:00 PM)
10:00 AM A 3D electromagnetic model for eddy currents analysis in superconducting magnets for fusion applications - Marco De Bastiani (Politecnico di Torino)  
10:00 AM A top-down modeling approach for DEMO magnetic system - Prof. Daniela Boso (University of Padova)  
10:00 AM Comparative electromechanical study of different Nb3Sn CICC designs for tokamaks with FE simulations - Rebecca Riccioli (CEA)  
10:00 AM Conceptual design of CRAFT TF coil heat treatment - Dr Weijun Wang (Institute of Plasma Physics Chinese Academy of Sciences)  
10:00 AM DEMO fusion reactor Toroidal Field coil optimized layer-wound design - Giordano Tomassetti (ENEA)  
10:00 AM Design of Quench Protection System for K-DEMO TF Magnet - yong chu  
10:00 AM Engineering the main structures of the DEMO fusion reactor magnet system - Lorenzo Giannini (ENEA)  
10:00 AM Heat Treatment Optimization on Nb3Sn Strands Based on Electrical and Physical Properties - Federica Dematte (EPFL-SPC)  
10:00 AM Novel magnetic systems for high power microwave sources – challenges and prospects - Prof. Mikhail Glyavin (IAP RAS)  
10:00 AM Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO - Pierluigi Bruzzone (EPFL-SPC)  
10:00 AM Seismic analysis of magnet systems in helical fusion reactors designed with topology optimization - Dr Hitoshi Tamura (National Institute for Fusion Science)  
10:00 AM Thermal Hydraulic Analysis of Toroidal Field Coil of CFETR - Junjun Li (Institute of Plasma Physics, Chinese Academy of Sciences)  
10:00 AM Thermal-hydraulic and quench analysis of EUROfusion DEMO PF coils - Dr Mithlesh Kumar (École Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC))  
10:00 AM UPDATES ON CEA DESIGN AND EXPERIMENTAL ACTIVITIES ON EU DEMO TF - Louis ZANI (CEA)  
10:00 AM
THU-PO3-206 Fusion VI: JT-60SA, DTT and Other Devices (until 12:00 PM)
10:00 AM AC losses in JT-60SA magnets during commissioning: experimental analysis and simulations - Dr Alexandre Louzguiti (CEA French Alternative Energies and Atomic Energy Com)  
10:00 AM Analysis of the thermal-hydraulic effects of a plasma disruption on the DTT magnet system - Dr Roberto Bonifetto (Politecnico di Torino)  
10:00 AM Engineering and Structural Assessment for the updated design of the DTT Central Solenoid - Luigi Muzzi (ENEA)  
10:00 AM Estimation of the Cool-Down Speed under the SHe inlet condition in JT-60SA CS module - Yuta Hirose (Sophia University)  
10:00 AM Evaluation of the thermal performance of the SC Feeders for the magnetic system of the Divertor Tokamak Test facility - Prof. Laura Savoldi (MAHTEP Group, Dipartimento Energia "Galileo Ferraris, Politecnico di Torino)  
10:00 AM Investigation of Transient Response caused by Power Supply on JT-60SA Central Solenoid - Shogo Sonoda (Sophia university)  
10:00 AM JT-60SA TFC02 COMPLEMENTARY QUENCH TESTS IN CTF: THERMOHYDRAULICAL ANALYSIS AND SMOOTH QUENCH CRITICALITY - Quentin Gorit (CEA)  
10:00 AM Numerical analysis on transient stability of large helical device conductor - MASAYOSHI OHYA (Kwansei Gakuin University)  
10:00 AM Preliminary structural analysis of the DTT current feeders conductors and clamps - Dr Francesco Giorgetti (University of Tuscia)  
10:00 AM The pressure drop measurement of JT-60SA superconducting magnets - Kazuma Fukui (National Institutes for Quantum and Radiological Science and Te)  
10:00 AM Thermal Analysis of Toroidal Field Coil of EAST During Plasma Discharges - Xinghao Wen (University of Science and Technology of China)  
10:00 AM Updated structural assessment of the Poloidal Field Coils of the DTT tokamak - Lorenzo Zoboli (University of Rome "Tor Vergata", Dept. of Civil Engineering and Computer Science)  
10:00 AM
THU-PO3-404 Magnets for MRI (until 12:00 PM)
10:00 AM A NbTi persistent current switch for MRI superconducting magnet - Prof. Chao Zhou ( Institute of Plasma Physics, Chinese Academy of Sciences)  
10:00 AM An Improved Passive Shimming Strategy for the Unsaturated Magnetization Problem in the Low-field Superconducting MRI Magnet - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences and Ganjiang Innovation Academy, Chinese Academy of Sciences)  
10:00 AM Analysis of Radial Preload of 14 T MRI Magnet - Houxiang Han (Institute of Plasma Physics Chinese Academy of Sciences)  
10:00 AM Compact MRI - Tim Coombs  
10:00 AM Design of a Cryogen-free 6 T 320 mm All-REBCO MRI Magnet - Kibum Choi (Seoul National University)  
10:00 AM Development of superconducting joints between bronze-route Nb3Sn multifilamentary wires for persistent-mode operation - Mr haihong Liu (中国科学院合肥物理研究所) Mr Peng Gao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)  
10:00 AM Feasibility study of novel rapid ramp-down procedure in MgB2 MRI magnet using persistent current switch with high off-resistivity - Motomune Kodama (Hitachi, Ltd.)  
10:00 AM FEM modeling of superconducting whole body, actively shielded 7 T MRI magnets wound using Nb3Sn strands - Dr Milan Majoros (The Ohio State University)  
10:00 AM Modelling and mitigation of quench risk for a NI HTS MRI brain magnet - Jamal Olatunji (Victoria University of Wellington)  
10:00 AM Numerical Study of Temperature Distribution within a Conduction-Cooled, MgB2 MRI Coil Segment - Ms Danlu Zhang (The Ohio State University)  
10:00 AM Structure design on the 3-T HTS coil for desktop MRI magnet using the Distributed Genetic Algorithm method. - Yoshihiro Osawa (Okayama university)  
10:00 AM Temperature Dependence of Optimal Shape and DC Current Transport Characteristics of 3T Whole Body REBCO MRI Magnet - Prof. Taketsune Nakamura (Kyoto University)  
10:00 AM
THU-PO3-405 Magnets for NMR (until 12:00 PM)
10:00 AM A method to reduce the influence of manufacturing error on magnetic field homogeneity in NMR magnets - Benzhe Zhou (Institute of Electrical Engineering, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:00 AM A Validation Study of Updated Features in a New 835-MHz REBCO Insert Coil for the MIT 1.3-GHz NMR Magnet - Juan Bascuñán (Massachusetts Institute of Technology)  
10:00 AM Analysis of electromagnetic characteristics of a novel no-insulation HTS coil with stainless steel tape wrapped around the outer layer of the coil - Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Kangshuai Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:00 AM Design, fabrication and test of a 300MHz conduction-cooled NMR superconducting magnet - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Yaohui Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
10:00 AM First NMR Signal Detection on Single-sided Magnetic Pole Surface Containing HTS Bulk Magnet Activated by Pulsed Field - Mr Sho Kikuchi (Shibaura Institute of Technology)  
10:00 AM Magnetic field distribution on a 400 MHz all-REBCO at 20mm DSV and multi-layered ferromagnetic shimming - Hongmin Yang (Kunsan National University)  
10:00 AM Persistent Current Switch with Diode Protection and Superconducting Joint for a 5 T NbTi NMR Magnet - Mr Hyun Sung Noh (Korea University)  
10:00 AM
THU-PO3-508 Superconducting Rotating Machines, Linear Machines, and Related Subjects III (until 12:00 PM)
10:00 AM A Dual-Stator HTS Modular Linear Vernier Motor for Long Stroke Applications - Mr Yujun Shi (University of Macau, Macao, China)  
10:00 AM Comparative Study of HTS linear synchronous motor with different core and winding structures for electromagnetic launching - Mr Yuanzheng Ma (Naval University of Engineering)  
10:00 AM Conceptual design of a linear generator suitable for marine energy power generation - Mr Petrus Kambo (Tokyo University of Marine Science and Technology)  
10:00 AM Electromagnetic Design of a Novel HTS Linear Synchronous Motor for Electromagnetic Launching - Shifeng Shen (Naval University of Engineering)  
10:00 AM Electromagnetic Shielding Technique for No-insulation Superconducting Rotor Windings in Electrical Aircraft Propulsion - Yutong Fu (1.Shanghai Jiao Tong University 2.Chongqing University)  
10:00 AM Force Characteristic Analysis of Active EDS System Under Different Control Currents - Dr Kang Liu (State Key Laboratory of Traction Power, Southwest Jiaotong University)  
10:00 AM Influence analysis of the geometrical parameters on the ac loss of the double sided linear HTS induction motor under various operation conditions - Dr Shuo Li (Northeastern University)  
10:00 AM Investigation on Time-Varying Behavior of No-Insulation HTS Field Coil for Synchronous Motors Considering Armature Reaction and Slotting Effect - Jonghoon Yoon (Seoul National University)  
10:00 AM Numerical Modeling for Electrical Machines with Superconducting Windings using H-A formulation - Haigening Wei (University of Cambridge)  
10:00 AM Numerical Study of Magnet Stability in the Superconducting Armature Winding for a Superconducting Generator - Mr Juzhuang Yan (School of Astronautics, Beihang University)  
10:00 AM R&D of a No-insulation HTS Magnet for Small-Scale Bilateral HTS Linear Synchronous Motors - Dr Fangliang Dong (Shanghai Jiao Tong University)  
10:00 AM Stability of a metal insulated 2G HTS coil under the external ac field - Myung-Hwan Sohn (Korea Electrotechnology Research Institute)  
10:00 AM
THU-PO3-511 Maglev and Levitation III (until 12:00 PM)
10:00 AM An adaptive control strategy of electromagnetic bearing for flywheel energy storage based on online parameters identification - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)  
10:00 AM Comprehensive performance evaluations on three kinds of radial hybrid magnetic bearings - Mr Xin Xian (Huaiyin Institute of Technology)  
10:00 AM Dynamic characteristics of a fully HTS magnetic bearing under harmonic excitation - Changqing Ye (Hohai University)  
10:00 AM Dynamics of magnetic flux during CC-tapes local magnetization - Diadechko Anastasiia (National Research Nuclear University MEPhI)  
10:00 AM Electromagnetic performance comparison between heteropolar and homopolar six-pole hybrid magnetic bearings - Tonghai Zhi (Huaiyin Institute of Technology)  
10:00 AM Experimental Research on the Translational Characteristics of High Temperature Superconducting Translational System - Mr Peng Zhao (Beihang University)  
10:00 AM Levitation force enhancement of a magnetic bearing using the stator of hybrid superconducting magnet - Ling Xiao (State Key Laboratory of Traction Power, Southwest Jiaotong University)  
10:00 AM Optimization of the Levitation Performance for the Fully-Superconducting Magnetic Bearing - Yu Haiyang (Southwest Jiaotong University)  
10:00 AM Rail magnets arrangement for improving stability of a superconducting transport system - Muneo Futamura (Akita Prefectural University)  
10:00 AM Research on universal mathematical model and design method of homopolar hybrid magnetic bearing - Zixin Wang (Huaiyin Institute of Technology)  
10:00 AM Study of Rotational Stability in the HTS Magnetic Bearing Rotor Incorporated the Secondary of the Induction Motor - Marin Minamitani (Kansai University)  
10:00 AM Suspension Force Analysis on 4-pole Radial Hybrid Magnetic Bearing with Independent Magnetic Circuits - Zixin Wang (Huaiyin Institute of Technology)  
10:00 AM Vibration Characteristics of HTS Maglev System Levitated Above a Halbach Permanent Magnet Track - Mr Tianci Ren (Southwest Jiaotong University)  
10:00 AM
THU-PO3-512 SFCL (until 12:00 PM)
10:00 AM Analysis of cut-off characteristics of transformer-type superconducting DC circuit breaker according to reactance of superconductor and transformer turns ratio. - Mr Ji-Sol Jeong (Chosun University)  
10:00 AM Analysis of Three Types of SFCL in Ship MVDC System - Haowen Zheng (Huazhong University of Science and Technology)  
10:00 AM Analysis on Fault Current Limiting and Recovery Characteristics of Three-Phase Transformer Type SFCL using Two SMs between Secondary Windings - Prof. Tae-Hee Han (Jungwon University) Sung-Hun Lim (Soongsil University) Prof. Seok-Cheol Ko (Kongju National University)  
10:00 AM Comparison and analysis of inductance according to toroidal winding type of superconducting element combined the DC circuit breaker - Mr Geon-woong Kim (Chosun University)  
10:00 AM Comparison of Current Limiting Characteristics of REBCO Superconducting Wire of the Electrical Coupling Condition between Core and Coil - Prof. Ho Ik Du (Jeonbuk National University)  
10:00 AM Comparison of Solenoid-type and Annular-type Parallel Inductors Schemes in H-SFCL of Shipboard MVDC IPS - Zheng Li  
10:00 AM Coordination Strategy of Magneto-biased Superconducting Fault Current Limiter and Relay Protection in 10 kV Urban Power Grid - Jiahui Zhu (China Electric Power Research Institute)  
10:00 AM DC Fault Current Limiting Characteristics of Flux-Lock Type SFCLs with Parallel and Series connection between Two Coils - Prof. Sung-Hun Lim (Soongsil University) Prof. Seok-Cheol Ko (Kongju National University) Prof. Tae-Hee Han (Jungwon University)  
10:00 AM Electromagnetic Design and Performance Analysis of a Hybrid-Type Superconducting Fault Current Limiter in Shipboard MVDC IPS - Zheng Li  
10:00 AM Fault Current Limiting Operations of Three-Phase Transformer Type SFCL using Secondary Windings with Closed Loop - Prof. Seok-Cheol Ko (Kongju National University) Sung-Hun Lim (Soongsil University) Prof. Tae-Hee Han (Jungwon University)  
10:00 AM The Coil Optimization Design of H-SFCL Applied in Ship DC System - Mr Zhenming Cai (Huazhong University of Science and Technology)  
10:00 AM
THU-PO3-605 MgB2 and Iron-based Wires and Cables (until 12:00 PM)
10:00 AM Critical Bending Radius Test and Analysis of 7-Filament Ba1-xKxFe2As2 Iron-Based Superconductor Tapes under 12 T Background Field - Xiao Liu (Hefei Institutes of Physical Science, Chinese Academy of Scienc)  
10:00 AM Critical current and nano-structural properties of K-doped BaFe$_2$As$_2$ epitaxial thin films by molecular beam epitaxy - Dongyi Qin (Tokyo University of Agriculture and Technology)  
10:00 AM Demonstration of a kA-class Rutherford Cables using MgB2 Wires for Energy Storage Device optimal for Liquid Hydrogen Indirect Cooling System - TSUYOSHI YAGAI (Sophia University)  
10:00 AM Development of MgB2 superconducting wires at Sam Dong Co., Ltd. - Dr Jun Hyuk Choi (Sam Dong Co., Ltd.)  
10:00 AM Effect of different bending diameters on the current-carrying capacity of iron-based superconducting tapes - Chunyan Li (Institute of High Energy Physics, Chinese Academy of Sciences)  
10:00 AM Influence of premix condition on the microstructure and trapped field properties of MgB2 bulk magnets by Mg Vapor Transportation (MVT) method - Rika Tanaka (Tokyo University of Agriculture and Technology)  
10:00 AM Measurement of irreversible external-compressive strain and minimization of reversible bending radius on MgB2 multifilament wire - Hideki Tanaka (Hitachi, Ltd.)  
10:00 AM Optimization of the react and wind coil manufacturing process using MgB2 twisted cable - Mr Jiman Kim (1.Kiswire Advanced Technology Ltd. 2.Korea University)  
10:00 AM Synthesis and Current Transport Properties of Ba(Fe,Co)2As2 Polycrystalline Bulks Prepared by Spark Plasma Sintering - Yuta Hasegawa  
10:00 AM
THU-PO3-608 AC Loss in HTS Wires and Cables (until 12:00 PM)
10:00 AM Conceptual Design and Optimisation of HTS Roebel Tapes - Luning Hao (University of Cambridge)  
10:00 AM Dynamic resistance and dynamic loss of the partially coupled quasi-isotropic cable with consideration of the resistance at terminals - Dr Shuo Li (Northeastern University)  
10:00 AM Evaluation of magnetic properties of REBCO wire by modified SST for cryogenics - Kazuki Kume (Okayama University)  
10:00 AM Experimental Evaluation of Current Distribution in Three-Strand Transposed Parallel Conductors Composed of REBCO Superconducting Tapes - Yuki Omanyuda (Kyushu University)  
10:00 AM Fabrication of magnetic field shielding film using YBa2Cu3O7-δ powder - Mr Jun-ya Tamaru (九州大学大学院)  
10:00 AM Influence of Dynamic Resistance on Current Distribution of HTS Cable Conductor for Feeder lines and Large Scale Magnet - Yinshun Wang  
10:00 AM Magnetization and Hysteresis Losses in HTS Coated Conductors in Magnetic Field of Various Orientation - Prof. Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))  
10:00 AM Reduction of AC losses in REBCO split wire and coil without deterioration of critical current - Shintetsu Kanazawa (Muroran Institute of Technology)  
10:00 AM Role of asymmetric critical current on magnetization loss characteristics of REBCO coated conductors at various temperatures - Yueming Sun (Robinson Research Institute, Victoria University of Wellington)  
10:00 AM Study on Screening Current of Like Quasi-isotropic Conductor Based on optimized T-A formulation - 馨丹 张  
10:00 AM
THU-PO3-611 Cable-in-Conduit and Other Internally Cooled Conductors (until 12:00 PM)
10:00 AM Manifestation of electromagnetic performance degradation of Nb3Sn cable-in-conduit conductor in the change of its mechanical structure - Mr Zichuan Guo (Institute of Plasma Physics Chinese Academy of Sciences)  
10:00 AM Structural Modeling of HTS VIPER Cable for High-Field Magnet Applications - Zijia Zhao (Tufts University)  
10:00 AM
THU-PO3-612 Bulk Magnets (until 12:00 PM)
10:00 AM A numerical evaluation of magnetizing characteristic of bulk magnet excited by pulsed-field magnetization with different shaped soft-iron yokes - Kazuya Yokoyama (Ashikaga University)  
10:00 AM Conception design of a magnetic flux lens using stacked HTS tapes - Difan Zhou (Shanghai University)  
10:00 AM Development of CaKFe4As4 bulks by spark plasma sintering method - Hiraku Ogino (National Institute of Advanced Industrial Science and Technolog)  
10:00 AM Fabrication of all c-grown RE123 melt-textured bulks with homogeneous trapping field distributions using Single-Direction Melt Growth method - Mr Sasada Rempei (Aoyama Gakuin University)  
10:00 AM Mitigation of non-uniform current distribution in bulk high-temperature superconducting rings for the generation of NMR-grade magnetic fields - Mike Beck (University of Cambridge)  
10:00 AM Physical properties of all c-grown Gd123 bulks starting from various metal compositions - Mr Takuma Tomihisa (Aoyama Gakuin University)  
10:00 AM Pulsed field magnetization of GdBaCuO superconducting bulks with high magnetization efficiency using a split type coil with a soft iron yoke - Motoki Shinden (Iwate University)  
10:00 AM Short-time fabrication and trapped field distributions of large REBCO melt-textured bulks made by Single-Direction Melt Growth method - Takanori Motoki (Aoyama Gakuin University)  
10:00 AM Study on the structure design of HTS bulk magnets for compact MRI - Prof. SEOKBEOM KIM (Okayama University)  
10:00 AM Tensile properties of (Gd,Y,Er)BaCuO superconducting bulk materials fabricated by infiltration growth technique - Dr Akira Murakami (National Institute of Technology, Ichinoseki College)  
10:00 AM The influence of local heat generation in a REBaCuO ring bulk with large bore on mechanical fracture during pulsed-field magnetization - Motoki Shinden (Iwate University)  
10:20 AM A Comparative Study of Experimental and Computational Modeling for Thickness Dependence of Trapped Field in Machined MgB2 Bulk Superconductors - Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)  
10:00 AM
THU-PO3-614 Current Leads (until 12:00 PM)
10:00 AM BSCCO geometrical and soldering optimisation for high current lead application - Dr Alessio Capelluto (ASG Superconductors) Mr Lorenzo Mauro (ASG Superconductors) Dr Martina Neri (ASG Superconductors)  
10:00 AM Gas-cooled Peltier current leads for compact HTS devices - Yury Ivanov (Chubu University)  
10:00 AM Preliminary design and analysis of 20 K helium cooled MgB2 based superconducting current feeder system for Tokamak application - Nitin Bairagi (Institute for Plasma Research, Bhat, Gandhinagar-382 428 Gujarat, India & Homi Bhaba National Institute, Anushakti Nagar, Mumbai-400 085, Maharashtra, India)  
10:00 AM
THU-PO3-617 Other Components for Magnets (until 12:00 PM)
10:00 AM A Novel High Heat Capacity Resin for Impregnation of Nb3Sn Superconducting Magnets - Akihiro Kikuchi (National Institute for Materials Science)  
10:00 AM Deformation of Copper Matrix Conductors under Cyclic Loading - Ke Han (Florida State University)  
10:00 AM Electromagnetic Characteristics of a Bitter-like HTS Magnet Excited by Flux Pump with Thermal Switch - Jiawen Wang (North China Electric Power University)  
10:00 AM Mechanical and thermal properties of glass fiber-filled thermos-plastic materials for magnet and cryogenic applications - Vince Toplosky (NHMFL)  
10:00 AM Optimal operating conditions of YBa2Cu3Oy HTS diode with a PrBa2Cu3Oy buffer layer - Mr Akihito Mizuno (Nagoya University)  
10:00 AM Repetitive irradiation tests at cryogenic temperature by neutrons and protons on stabilizer materials of superconductor - Makoto Yoshida  
10:00 AM
THU-PO3-707 Quench Analysis I (until 12:00 PM)
10:00 AM A Numerical Method for Simulating the Quench Behavior of Superconductors - Prof. Yinshun Wang (North china electric power university) Dr Wei Pi (North China Electric Power University)  
10:00 AM Adaptive Element Equivalent Circuit of No-Insulation High Temperature Superconductor Coil Containing Multiple Defects - Mr Soobin An (Seoul National University)  
10:00 AM Experiment and analysis of spatial electromagnetic and thermal behaviors during quench propagation in no-insulation HTS coil with multi-physics distributed-circuit approach - Mr Geonyoung Kim (Seoul National University)  
10:00 AM Network model for REBCO pancake coils with heat transfer - Zoe Webb-Mack (Lawrence Berkeley National Laboratory) Xiaorong Wang (Lawrence Berkeley National Laboratory) Qing Ji (Lawrence Berkeley National Laboratory)  
10:00 AM Numerical study of quench behaviour in YBCO CORC cables - Jiabin Yang (University of Cambridge)  
10:00 AM Partial-Insulation HTS Magnet for Reduction of Quench-Induced Peak Currents - Wooseung Lee (Massachusetts Institute of Technology)  
10:00 AM Quench detection and protection of high-temperature superconducting magnets: The case of a Bi-2212 Rutherford cable canted-cosine-theta dipole magnet - Christopher Reis (Lawrence Berkeley National Laboratory)  
10:00 AM Quench Study on REBCO Coil for a HTS Sextupole Magnet - Xudong Wang (High Energy Accelerator Research Organization)  
10:00 AM Transient behavior of a REBCO No-Insulation or Metal-as-Insulation multi-pancakes-or racetracks- coil using a Partial Element Equivalent Circuit model. - Clément Genot (CEA Saclay)  
10:00 AM
THU-PO3-710 Stability (until 12:00 PM)
10:00 AM [Invited] Stability of Two Impregnated 1.5-T NbTi Coils Operated in the 4.2-6 K Range, Paraffin vs. Solid Nitrogen - Wooseung Lee (Massachusetts Institute of Technology)  
10:00 AM Effect of Different Impregnation Materials on Electromechanical Behaviors of Superconducting Compact Cables - Haosheng Ye (Shanghai Jiao Tong University)  
10:00 AM Enhanced Thermal and Electrical Properties of GdBCO Magnets Impregnated with Epoxy Composites Containing Various Fillers - Mr Young Hoon Kim (Korea University)  
10:00 AM Increase of thermal stability caused by high thermal conduction VFRPs in conduction-cooled HTS coils - Kai Fukano (Sophia University)  
10:00 AM Investigation of AC Current Transmission Capacity of 2G HTS Tapes Under Different Refrigeration Conditions - Xin Li  
10:00 AM Minimum Quench Energy of Nb3Sn Wires and Rutherford Cables with High Specific Heat - emanuela barzi (Fermilab)  
10:00 AM Minimum Quench Energy of NbTi and Nb3Sn Conductors Impregnated with High Heat Capacity Resin - emanuela barzi (Fermilab)  
10:00 AM Thermal-Quench Behavior of GdBCO Coils Wound with Grease Containing Various Fillers as Insulation Materials - Mr Hyun Sung Noh (Korea University)  
10:00 AM
THU-PO3-713 Magnetization and Field Quality I (until 12:00 PM)
10:00 AM [Invited] Development of precise shimming technique with materials having low saturation magnetization - Ken-ichi Sasaki (KEK)  
10:00 AM Design method of active shield coils of steering magnet for fine tuning of muon injection orbit in muon storage magnet of g-2/EDM precision measurement - Dr Mitsushi Abe (KEK)  
10:00 AM Development of magneitc field mapping system for MuSEUM experiement with high precision using CW-NMR probes - Ken-ichi Sasaki (KEK)  
10:00 AM Effect on temperature dependence for long-term stable control of the magnetic field at sub-ppm using superconducting magnet for MRI - Moe Sugita (Japan Atomic Energy Agency)  
10:00 AM ITER Outer Vessel Steady-State magnetic sensor calibration - Thomas Strauss (FNAL)  
10:00 AM
THU-PO3-717 Mechanical Behavior of Conductor (until 12:00 PM)
10:00 AM Bending Characteristics of Cable-In-Conduit Conductor based on Quasi-Isotropic Strands - Yang Nie (North China Electric Power University)  
10:00 AM Critical current of various ReBCO tapes under uniaxial strain - Huan Jin  
10:00 AM Development of a Simple Measurement System for Electromechanical Performance Evaluation of REBCO Coated Conductor Tapes - Mark Angelo Diaz (Andong National University)  
10:00 AM Mechanical stress simulation of REBCO tapes using particle methods - Takanobu Mato (Hokkaido University)  
10:00 AM
THU-PO3-719 Design and Analysis II (until 12:00 PM)
10:00 AM Assessment of coil design and pulse unit parameters for the optimization in the electromagnetic forming process of metal sheet - Prof. Evandro Paese (Universidade de Caxias do Sul - UCS)  
10:00 AM Comparison between T-A formulation and uniform current assumption for the critical current calculation of high temperature superconductor ReBCO coils - Wenbo Xue (Shanghai Jiao Tong University)  
10:00 AM Current distribution modeling in the open-source OPENSC2 tool for the multi-physics analysis of HTS and LTS superconducting cables - Ms Sofia Viarengo (MAHTEP Group, Dipartimento Energia "Galileo Ferraris", Politecnico di Torino, )  
10:00 AM Experimental and Comparative Study of Noise Vibrations and Harshness of Permanent Magnet Machines according to Rotor Eccentricity with Two Different Fractional Pole/Slot Combinations - Tae-Kyoung Bang (Republic of Korea /Chungnam National University)  
10:00 AM Improvement of excitation delay by multiple high temperature superconducting tapes in no-insulation coil - Mr Yuma Nakada (Chiba University)  
10:00 AM Levitation characteristics analysis of a novel bearingless switched reluctance motor - Zixin Wang (Huaiyin Institute of Technology)  
10:00 AM Magnetothermal Coupling Analysis of Claw Pole Machine using Combined Magnetic and Thermal Network Method - Xue Wang  
10:00 AM Modelling and Investigation on the AC loss of the 2G YBCO tape influenced by High-order power harmonics - Chang Niu (Hunan University) Liu Xinyi (Hunan University)  
10:00 AM Screening Current Induced Field changes during De-energization with Axial Clamping - Dylan Kolb-Bond (NHMFL)  
10:00 AM STEAM Software Framework to Simulate Transients in Accelerator Magnets and Circuits - Dr Emmanuele Ravaioli (CERN) Mariusz Wozniak (CERN)  
10:00 AM Thermal Network Modeling for High-frequency Insulated Core Transformers - Lanxin Nie (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (School of Electrical and Electronic Engineering, Huazhong University of Science and Technology), Wuhan, China)  
10:00 AM Thermal stability against local critical current degradation in an HTS pancake coil wound with an insulated conductor composed of no-insulated multiple tapes - Mr Mikito Takenaka (Chiba university)  
10:00 AM
THU-PO3-802 Cryostats and Cooling systems (until 12:00 PM)
10:00 AM A long-life, high-capacity and high-efficiency cryogenic system developed for high-Tc superconducting magnet applications - Renjun Xue (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences)  
10:00 AM A preliminary cryogenic performance test of the 4.8-m-long cryostat for superconducting undulators - Dr Yuko Shiroyanagi (Argonne National Laboratory)  
10:00 AM Conceptual design of a magnetic refrigerator for cooling quantum computers - Koji Kamiya (National Institute for Materials Science)  
10:00 AM Cryostat design for HTS conductors test in the field of 19.5 T @200 mm bore - Kai Zhang ([1]Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China [2]University of Science and Technology of China, Hefei 230026, China)  
10:00 AM Cryostat for HECRAL Superconducting Magnet - Mr Xudong Wang ((Institute of Modern Physics, Chinese Academy of Sciences)  
10:00 AM Design of a helium-liquid hydrogen based indirect cooling system for an HTS coil cooling - Gi-Dong Nam (Changwon National University)  
10:00 AM Fermilab’s Horizontal Test Stand Cryogenic System Upgrade and Commissioning - Roger Rabehl (Fermilab)  
10:00 AM HTS coil cooled with liquid hydrogen and fuel cell power source - Dong-Woo Ha (Korea Electrotechnology Research Institute)  
10:00 AM Research on combined use of magnetic refrigeration technology for refrigerant circulation type high temperature superconducting coil cooling system - Mr Yodai Okazaki (Tokyo Institute of Technology)  
10:00 AM Structural Design and Analysis of Cryogenic System for 3.5 T HTS Magnetic Separation Facility - Liang Guo  
10:00 AM Study of refrigerant circulation system and cryofan for cooling high temperature superconducting coils. - Mr Masazumi Noguchi (Tokyo Institute of Technology)  
10:00 AM Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron - wei you (Institute of Modern Physics, Chinese Academy of Sciences)  
10:00 AM Study on the state prediction of the superconducting magnet system for a nuclear fusion experimental device by machine learning - Dr Tetsuhiro Obana (NIFS)  
10:00 AM The study on the quench helium release process of HFRS superconducting magnet - Lishi Wang  
10:00 AM Thermodynamic Behavior Analysis and Heat Transfer Structure Design of Helium Bubble Aggregation in High Field Superconducting Magnets - Wenzhe Hong  
10:00 AM
THU-PO3-803 Current supply, regulation & cryogenic power electronics (until 12:00 PM)
10:00 AM A novel cryogenic model for SiC MOSFET - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)  
10:00 AM A temperature and over current controlled persistent current switch for high temperature superconducting magnets - Yanbo Bi (Shanghai Jiaotong University)  
10:00 AM Concept Design of Power Source for High Temperature Superconducting Ship Deperming Coil System - Dr Megumi Hirota (Naval Ship M&UEP R.C., NPO)  
10:00 AM Control the Output of an HTS Dynamo with a DC Background Field - Mr Hang Xu (Sichuan University)  
10:00 AM Design and study of a new type of series active filter for the 10MW-level high power and high stability DC power supply - MinHui Song (Hefei Institutes of Physical Science, Chinese Academy of Scienc)  
10:00 AM Feasibility Study of Thyristor Rectifier with Unity Power Factor for Superconducting Magnet in Tokamak - Shoichi Hatakeyama (National Institutes for Quantum and Radiological Science and Technology)  
10:00 AM Structure Optimization of Linear Generator Coil in No-contact On-board Power Source for EDS Maglev - Yuxiao Li (southwest jiaotong university)  
10:00 AM
THU-PO3-LN2 Late News II (until 12:00 PM)
10:00 AM A Flexible Control System Design of Pulsed High Magnetic Field Facility based on Physical Model - Xiaotao Han (Huazhong University of Science and Technology)  
10:00 AM Analysis and design of Control Sequence for Multi-Stage and Ultrahigh Magnetic System at WHMFC - Xiaotao Han (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)  
10:00 AM Automatic Detection of Local Obstacles in a Long Length RE-123 Coated Conductor by Deep Learning Based Image Classification in Reel-to-Reel Magnetic Microscopy - Natthawirot Somjaijaroen (Kyushu University)  
10:00 AM Contact Resistance Dependent Transient Loss of REBCO No-insulation Magnet using T-A formula during Ramping Process - Mr Quanyue Liu (Changwon National University)  
10:00 AM Design and Quench Analysis of a Cryogen-Free Superconducting Magnet for 170-GHz Gyrotron - Dr Seokho Nam (JH engineering Company Ltd.)  
10:00 AM Design of Pulsed Power Supply for Repetitive Pulsed High Magnetic Field for Water Electrolysis - shan jiang (Huazhong University of Science and Technology)  
10:00 AM Effect of current-sharing and heat capacity of metal core on quench protection of spiral coated conductors - Guangwei Xu (Kyoto University)  
10:00 AM Enhancement of magnetic flux distribution using roundly stacked-HTS tape - KEITA TSUZUKI (National Institute of Technology, Toyota College)  
10:00 AM Influence of Stainless Steel Shell on the 100 T Pulsed Magnet - Shuang Wang (Huazhong University of Science and Technology)  
10:00 AM Novel Pb- and Cd-free superconducting joint between NbTi and Nb3Sn wires using high-temperature-tolerable superconducting Nb-alloy intermedia - Dr Nobuya Banno (National Institute for Materials Science)  
10:00 AM Reliability Analysis of Pulsed High Magnetic Field Facility at WHMFC - jianfeng Xie (Huazhong University of Science and Technology)  
10:00 AM State predictive control of modular SMES magnet based on deep reinforcement learning - Zitong Zhang (Huazhong University of Science and Technology)  
7:30 AM
FRI-OR6-101 Accelerator Magnets I: HFM and others applications - Paolo Ferracin Michinaka Sugano (until 9:30 AM)
7:30 AM [Invited] Main results and lessons learned from the MDPCT1 R&D program - Alexander Zlobin (Fermilab)  
7:45 AM Analysis of quench data and performance of MDPCT1 – the 15 T Nb3Sn dipole demonstrator - Stoyan Stoynev (FNAL (US))  
8:15 AM Towards 20 T hybrid accelerator dipole magnets - Paolo Ferracin  
8:30 AM Progress of the High Field Magnet Program for SPPC - Qingjin XU (IHEP)  
8:45 AM Quadrupole Superconducting Model Magnet for Upgrade of the Nuclotron Synchrotron - Dr Mikhail Novikov (Joint Institute for Nuclear Research)  
9:00 AM Superconducting magnet system for HIAF - Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)  
9:15 AM Construction status of the superconducting magnet system for the COMET experiment - Naoyuki SUMI (KEK)  
7:30 AM
FRI-OR6-603 High Tc Wires and Cables II - Danko van der Laan (Advanced Conductor Technologies) Naoyuki Amemiya (until 9:30 AM)
7:30 AM [Invited] Development of high-strength CORC® conductors with record-breaking irreversible axial tensile strain limit exceeding 7 % - Danko van der Laan (Advanced Conductor Technologies)  
7:45 AM Developing a Vacuum Pressure Impregnation Procedure for CORC® Wires - Jillian Stern (Tufts University and Lawrence Berkeley National Laboratory)  
8:00 AM Designing and Manufacturing of REBCO-based Al-slotted core Cable-In–Conduit Conductors for quench experiments - Giuseppe Celentano (ENEA)  
8:15 AM Design, manufacture and test of ReBCO CICC for CFETR - Prof. Chao Zhou ( Institute of Plasma Physics, Chinese Academy of Sciences)  
8:30 AM Performance of a test coil wound from defect-tolerant second generation cable - Vyacheslav Solovyov (Brookhaven Technology Group)  
8:45 AM Potential of Superconducting Joints Connecting Bi2223 Tapes - Prof. Jun-ichi Shimoyama  
9:00 AM Measurement and Analyses of In-field Critical Currents in Multi-Filamentally Bi-2223 Tapes at Ultra-Low Electric-Field Criterion Down to at around 10^-13 V/m - Zeyu Wu (Kyushu University)  
9:15 AM Performance of compact wind-and-react MgB$_2$ solenoid coil made with continuously produced cable - Dr Benjamin Bryant (Oxford Instruments Nanoscience)  
7:30 AM
FRI-OR6-701 Design and Analysis - Honghai Song (Stony Brook University) So Noguchi (Hokkaido University) (until 9:30 AM)
7:30 AM Quasi-3D Magneto-Thermal Quench Simulation of Superconducting Magnets - Ms Laura D'Angelo (TU Darmstadt)  
7:45 AM An Optimal Configuration Method of Superconducting Magnet with Iron Shield using Model Order Reduction - So Noguchi (Hokkaido University)  
8:00 AM A complete, coupled model for Electro-Magnetic, Electro-Thermal and Mechanical analysis for axi-symmetric coils using variational principles - Mr Anang Dadhich (Institute of Electrical Engineering, Slovak Academy of Sciences)  
8:15 AM Multiphysics field topology optimization design of heat conduction structure of high-temperature superconducting magnets - QING SHAO  
8:30 AM Evaluation of the screening current effect in an all-superconducting high-field magnet - Dr XiaoGang Liu (Institute of Plasma Physics)  
8:45 AM Simulation of Quench Transients in Self-Protecting Magnets with a 3D Semi-Implicit Finite-Difference Method - Dr Emmanuele Ravaioli (CERN)  
9:00 AM Modeling stabilizer and superconducting inhomogeneities of commercial REBCO tapes with a 1-D electro-thermal model - Nicolo' Riva (EPFL - EPF Lausanne)  
9:15 AM Variable inductance observed in the HTS non-insulation (NI) coils - Dr Sriharsha Venuturumilli (Robinson Research Institute, Victoria University of Wellington)  
9:30 AM --- Break ---
10:00 AM
FRI-OR7-303 HTS coil II - Iain Dixon (Florida State University) Yoshinori Yanagisawa (RIKEN) (until 12:00 PM)
10:00 AM Hybrid Microscopy to Clarify Failure Mechanisms of REBCO Tapes in Meter-Class Pancake-Coils - Takanobu Kiss (Kyushu University)  
10:30 AM Integration of Bi-2212 and Nb3Sn CCT magnets for a hybrid magnet test - Laura Garcia Fajardo (Lawrence Berkeley National Laboratory)  
10:45 AM Development of a small-aperture cos-theta dipole insert coil based on Bi2212 Rutherford cable and stress management structure - Alexander Zlobin (Fermilab)  
11:00 AM Experimental Study on Effectiveness of Different Reinforcement Layouts Applied to Recent Bi-2212 Test Coils - Dr Youngjae Kim (National High Magnetic Field Laboratory)  
11:15 AM Development of HTS conductor for the central solenoid of compact fusion reactor TRT - Victor Sytnikov (R&D Center @ Federal Grid Company)  
10:00 AM
FRI-OR7-502 SMES, Superconducting Transformers, Cables and Bulks - Shinichi Nomura (Meiji University) Kohei Higashikawa (Kyushu University) (until 12:00 PM)
10:00 AM [Invited] 15% reduction in AC loss of a 3-phase 1 MVA HTS transformer by exploiting asymmetric conductor critical current - Zhenan Jiang (Victoria University of Wellington)  
10:15 AM Operation Scenario of Mobile SMES for On-Site Eigenvalue Measurement of Electric Power System - Dr Shinichi Nomura (Meiji University)  
10:30 AM Development of DC Superconducting Cable with Magnetic Energy Storage Function for Compensating Power Fluctuation from Renewable Energy Sources - Kohei Higashikawa (Kyushu University)  
10:45 AM Development of superconducting magnetic energy storage for the power system of the particle accelerators Booster and Nuclotron of NICA - Mikhail Novikov (Joint Institute for Nuclear Research)  
11:00 AM [Invited] Portable, desktop high-field magnet systems using bulk high-temperature superconductors - Mark Ainslie (University of Cambridge)  
11:30 AM Numerical modeling of the pulse field magnetization of the bulk array used as the field poles of a superconducting machine - Mr Antomne Caunes (Tokyo University of Marine Science and Technology)  
11:45 AM Trapped Field Characteristics of K-doped Ba122 Polycrystalline Bulks Synthesized by Spark Plasma Sintering - Mr Shinnosuke Tokuta (Tokyo University of Agriculture and Technology)  
10:00 AM
FRI-OR7-801 Cryogenics - Yu WU (ASIPP) Toshiyuki Mito (National Institute for Fusion Science (NIFS)) (until 12:00 PM)
10:15 AM Thermal characteristics of JT-60SA thermal shield - Kyohei Natsume (National Institutes for Quantum and Radiological Science and Technology)  
10:30 AM Feasibility of different cryogenic systems for ReBCO coils based high-dynamic superconducting actuators - Mr Jeroen ter Harmsel (University of Twente)  
10:45 AM Design and experimental investigations on the helium circulating cooling system operating at around 20 K for a 10-Mvar class HTS dynamic synchronous condenser - Jun Tan (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences)  
PM
12:00 PM --- Lunch ---
2:00 PM --- Asian Superconductivity School - Part II - ---
12:00 PM --- Lunch ---
1:15 PM
TUE-PO1-104 Accelerator Magnets II: fast cycling, injection, extraction (until 3:15 PM)
1:15 PM Control of Rotatable-Quadrupole Magnets Angles for 3-D Spiral Injection Test Experiment - Honoka Hirayama (Ibaraki University)  
1:15 PM Design of a strong X-Y coupling beam transport line for J-PARC muon g-2/EDM experiment - Hiromi Iinuma (Japan/Ibaraki-University)  
1:15 PM Development of A Prototype Kicker Magnet for Beam Distribution System of SHINE - Yongfang LIU (SARI-CAS)  
1:15 PM Developments of a Pulse Kicker System for the Three-Dimensional Spiral Beam Injection of the J-PARC Muon g-2/EDM Experiment - Kodai Oda (Ibaraki-University)  
1:15 PM Electromagnetic Design of a 6 T Cos-theta Fast Cycling Dipole Model - Tongjun Yang (Institute of Modern Physics, Chinese Academy of Sciences)  
1:15 PM Magnets for Ion Transfer Line from the Booster to the Nuclotron for the NICA project - Ivan Okunev (BINP SB RAS)  
1:15 PM Optimization design and development of septum magnet - Yanqun Wei (Institute of Modern Physics, Chinese Academy Sciences)  
1:15 PM The Superconducting Shield (SuShi) septum magnet prototype - Dr Daniel Barna (Wigner Research Centre for Physics)  
1:15 PM Transient Simulation and Field Measurement of Trim Quadrupoles and AC Sextupoles for CSNS/RCS Upgrade - Changdong Deng (institute of High Energy Physics, CAS)  
1:15 PM Truncated-Cosine-Theta Design for High Field Septum Magnets - Kei SUGITA (GSI)  
1:15 PM
TUE-PO1-106 Accelerator Magnets IV: HTS (until 3:15 PM)
1:15 PM [Invited] Design of the HTS based, high power proton Cyclotron CYCIAE-100B - Prof. Tianjue Zhang (China Institute of Atomic Energy)  
1:15 PM Design and optimization of the superconducting quadrupole magnet Q1a in CEPC interaction region - Chuang Shen (1 Institute of High Energy Physics, Chinese Academy of Science, Beijing 1000049, China; 2 University of Chinese Academy of Sciences, Beijing 100049, China)  
1:15 PM Fabrication and Test of a 1.5 T Cryogen-Free HTS Magnet for the Heavy Ion Spectrometer - Yuquan Chen  
1:15 PM Fabrication and Test of a 1:4 Scaled HTS Coil for the Defocusing Magnet of a 2 GeV FFAG Accelerator - Dr Chuan Wang (China Institute of Atomic Energy)  
1:15 PM HTS Dipole Magnet Model for the Persistent Current Operation - VLADIMIR KASHIKHIN (Fermilab)  
1:15 PM
TUE-PO1-110 High Field Accelerator Magnets I: Nb3Sn (until 3:15 PM)
1:15 PM Construction and test of the enhanced Racetrack Model Coil, first CERN R&D magnet for the FCC - Mr Juan Carlos Perez (CERN)  
1:15 PM Design and Digital Twin of INFN’s main Nb3Sn 15T Dipole for CERN’s FCC - Mr Charilaos Kokkinos (FEAC Engineering P.C.)  
1:15 PM Design of CCT6: a large-aperture, 12 T, Nb3Sn Dipole Magnet - Lucas Brouwer (Lawrence Berkeley National Laboratory)  
1:15 PM Development of a 120-mm aperture Nb3Sn dipole coil with stress management - Igor Novitski (FERMILAB)  
1:15 PM Mechanical Design of the Nb3Sn Cos-theta Short Model Dipole for the Future Circular Collider - Mrs Alessandra Pampaloni (INFN Genova)  
1:15 PM
TUE-PO1-113 HL-LHC Accelerator Magnets III: NbTi (until 3:15 PM)
1:15 PM Conceptual Design of the HL-LHC Hollow electron lens superconducting magnet system - Dr Arnaud Pascal Foussat (CERN)  
1:15 PM Design of a double aperture Canted-cosine-theta orbit corrector for the High Luminosity LHC - Kevin Pepitone (Uppsala University)  
1:15 PM Magnetic measurements of a full-scale prototype of the HL-LHC beam separation dipole - Dr Kento Suzuki (High Energy Accelerator Research Organization)  
1:15 PM Magnetic Measurements on the Twin Aperture Orbit Correctors for HL-LHC at IMP - Wenjie Yang (Institute of modern physics, Chinese academy of sciences)  
1:15 PM Quench Behaviour of Prototype HL-LHC Dipole Canted Cos-Theta Orbit Corrector Nb-Ti Magnet - Mariusz Wozniak (CERN)  
1:15 PM Quench Protection of the HL-LHC Hollow Electron Lens Superconducting Solenoid Magnets - Mariusz Wozniak (CERN)  
1:15 PM Test Results of the MQYYM: a 90 mm NbTi quadrupole magnet option for HL-LHC - Damien Simon  
1:15 PM The separation-recombination dipole MBRD for the High-Luminosity LHC: from prototype to series - Filippo Levi (INFN)  
1:15 PM
TUE-PO1-115 Permanent accelerator magnets (until 3:15 PM)
1:15 PM A Low-Temperature-Dependent Calibration of Hall probes for CPMU - Dr Chih Wei Chen (National Synchrotron Radiation Research Center)  
1:15 PM Development of Hybrid Multipole Permanent Magnet for High-Intensity Beam Transportation - Yasuhiro Fuwa (Japan Atomic Energy Agency)  
1:15 PM Performance of Bipolar Correction Magnet with Permanent Magnets - Yasutoshi Kuriyama (Kyoto University)  
1:15 PM Property of Praseodymium Permanent Magnet for Cryogenic Hybrid Magnet - Yasuhiro Fuwa (Japan Atomic Energy Agency)  
1:15 PM Radiation-Induced Demagnetization Measurement of Permanent Magnet Materials by Systematic Neutron Irradiation - Yasuhiro Fuwa (Japan Atomic Energy Agency)  
1:15 PM
TUE-PO1-203 Fusion III: ITER (until 3:15 PM)
1:15 PM Analysis of AC losses in the tests of the ITER CS Module #2 - Marco Breschi (Universita e INFN, Bologna (IT))  
1:15 PM Current Centre Line calculation method and results for ITER Poloidal Field Coils - Marc Ferrater (Fusion for Energy)  
1:15 PM Current Centre Line control, results and comparison after the manufacturing of the ITER Toroidal Field Coils - Mr Marc Jimenez (Fusion For Energy)  
1:15 PM Development of a AC Loss Model for the ITER CS Coils - Pierre Bauer (ITER Organization)  
1:15 PM Examination and Characterization of Physical and Mechanical Properties of the ITER Central Solenoid Module Coils - Dr Stefano Sgobba (CERN)  
1:15 PM Factory acceptance test and delivery of the first two poloidal field coils to ITER fusion facility - Monica Martinez Lopez (Fusion for Energy)  
1:15 PM Feasibility Study of ITER In-Vessel Coils Bracket Manufacture and Integration - Aihua Xu (institute of plasma physics Chinese academy of sciences)  
1:15 PM Homogenization of Winding Pack Properties for the Structural Analysis of Fusion Magnets - Mr José Lorenzo (Barcelona Supercomputing Center (BSC))  
1:15 PM Manufacturing of ITER PF2-6 Coil - Mr Byung Su LIM (ITER)  
1:15 PM Metrology in process control for the European Toroidal Field Coil project - Mr Alessandro Lo Bue (Fusion for Energy)  
1:15 PM Review of experimental results and parameters for evaluation of AC losses of the ITER conductors - Alexandre Torre (CEA)  
1:15 PM Status of the production of the European ITER Toroidal Field Coil Insertion. - boris bellesia (fusion for energy)  
1:15 PM The result of ITER TF coil double-pancake heat treatment in Japan - Hideki Kajitani (National Institutes for Quantum and Radiological Science and Te)  
1:15 PM
TUE-PO1-305 HTS/LTS coil (until 3:15 PM)
1:15 PM [Invited] Conceptual Design Study of the Outsert superconducting Coils of the Hybrid Magnets - Dr Donghui Jiang (The High Magnetic Field Laboratory, Chinese Academy of Sciences)  
1:15 PM Concept Design Study of a Conductor Test Facility Magnet over 16T - Hyun Wook Kim (Korea Institute of Fusion Energy)  
1:15 PM conceptual design of closed-loop HTS magnet with thermal switch - Mr Lingfeng Zhu ( the State Key Lab of New Energy Renewable Power System, North China Electric Power University, Beijing, China)  
1:15 PM Cyclic Axial Pressure Limits of REBCO Double Pancake Coils with Variable Co-wind Dimensions at 77 K - Iain Dixon (NHMFL / Florida State University)  
1:15 PM Fabrication and characterization of BSCCO-2223 tape based compact coils - Mr Upendra Prasad (Institute For Plasma Research)  
1:15 PM Feasibility Study on CCT Magnet Design based on Narrow-Stacked HTS wire - Mingyang Wang (Shanghai Jiao Tong University)  
1:15 PM Finite Element Analysis of AC Loss Properties in Pancake Coils Wound Using Two-ply Bundle Conductor - Prof. Kazuhiro Kajikawa (Sanyo-Onoda City University)  
1:15 PM Further analysis of the mechanical and thermal properties of ice in the ice impregnated high temperature superconducting coils - Dr Wang Guangda (State Grid Energy Research Institution)  
1:15 PM Lap joint resistivity and crossover resistance of REBCO conductors and coils - William Marshall (National High Magnetic Field Laboratory)  
1:15 PM
TUE-PO1-402 Magnets for Medical App I (until 3:15 PM)
1:15 PM Design and Development of Curved CCT Dipole Magnets for a Proton Therapy Gantry - Dr Shaoqing Wei (Institute of Plasma Physics, Chinese Academy of Sciences)  
1:15 PM Design and Test of a Bended Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System - Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Jigang Zhao (Institute of Electrical Engineering, Chinese Academy of Sciences) Yaohui Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
1:15 PM Electromagnetic design of the superconducting magnet for a compact heavy-ion synchrotron - Dr Kota Mizushima (National Institutes for Quantum and Radiological Science and Technology)  
1:15 PM Electromagnetic-structural analysis of a superconducting magnet with active shielding for a rotating gantry - Dr Tetsuhiro Obana (NIFS)  
1:15 PM Feasibility Study on a Real-Scale High-Frequency Electromagnets for Magnetic Hyperthermia Base on a Magnetic Scaling Law - XU HANG  
1:15 PM Magnetic alignment and mechanical analysis of superconducting bending section for proton therapy - Dr Frederic Trillaud (Instituto de Ingeniería, Universidad Nacional Autónoma de México)  
1:15 PM Rotating gantry for heavy ion therapy mounted with superconducting bending and focusing magnets - Shigeki Takayama (Toshiba Energy Systems & Solutions Corporation)  
1:15 PM Thermal analysis of powering and protection transients in a superconducting magnet for medical applications - Vittorio Ferrentino (CERN)  
1:15 PM Thermal design and test results of the superconducting magnet for a compact heavy-ion synchrotron - Saki Amano (Toshiba Energy Systems & Solutions Corporation)  
1:15 PM
TUE-PO1-504 Special purpose magnets I: Field gradients & other applications (until 3:15 PM)
1:15 PM Design and Characteristics Analysis of a Laboratory Electromagnet applying HTS Coils - Young Jin Hwang (Korea Maritime and Ocean University)  
1:15 PM Design and experiment of the conduction cooled superconducting magnet for crystal growth application - Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and University of Chinese Academy of Sciences)  
1:15 PM Development of novel magnetic separation for paramagnetic particles using the selection tube - Prof. Fumihito MISHIMA (Fukui University of Technology)  
1:15 PM Reinforcement Structure of HTS Magnet to Increase the Magnetic Moment for Space Application - Yoh Nagasaki (Tohoku University)  
1:15 PM Removal of Iron Oxide Scale from Boiler Feed-water in Thermal Power Plant by Magnetic Separation　-Aggregation States of Oxygenated Treatment Scale- - Mr Masao Okumura (Osaka University)  
1:15 PM Removal of magnetic fine particles from non-magnetic fine powder by high gradient magnetic separation under dry condition - Chen Haozhou (Tokyo Met. University)  
1:15 PM Separation of Microplastics from Sea Water by Means of Electromagnetic Force - Dr Nishijima Shigehiro (Fukui University of Technology)  
1:15 PM Superconducting Magnet Design for a Vertical-ring High Gradient Magnetic Separation System - Hengkang Zheng (Huazhong University of Science and Technology)  
1:15 PM Validation of a high-gradient trapped field magnet with an open bore providing a quasi-microgravity space on Earth and its application to magnetic levitation - Dr Keita Takahashi (Iwate University)  
1:15 PM
TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I (until 3:15 PM)
1:15 PM Comparative Design Study of HTS Synchronous Motor with Inner and Outer Rotor Type Based on Multi-Objective Optimization - Dr Seok-Won Jung (Seoul National University)  
1:15 PM Comparative Study of MW class Superconducting Machines according to Shielding and Electromagnetic Structures Based on Analytical Method - Tae-Kyoung Bang (Republic of Korea /Chungnam National University) Kyung-Hun Shin (Chonnam National University)  
1:15 PM Design and Analysis of a Revolving Armature type Axial Flux High-Temperature Superconducting Motor - Jun-Yeop Lee (Changwon national university)  
1:15 PM Design and Preliminary Experiments of Rotating Armature Partial Superconducting Air Core Generator - Han-Wook Cho (Chungnam National University)  
1:15 PM Experimental test and characteristic analysis of a real scale HTS coil for 10 MW HTS generator using performance evaluation system - Changhyun Kim (Changwon National University)  
1:15 PM Numerical Analysis of 2 MW Fully Superconducting Synchronous Motor for Electric Aircraft Considering AC Loss in Field Winding - Kazane Matsumoto  
1:15 PM Numerical Prediction of HTS Closed Coil Current Decay for Synchronous Motor Application - Yao Zhai (Southwest Jiaotong University)  
1:15 PM Preliminary Rotational Test of an HTS Synchronous Motor with Linear-Motor Type Flux Pump Exciters - Mr Run Long (Sichuan University)  
1:15 PM Thermal-Electromagnetic Coupled Analysis Considering AC Losses in REBCO Windings at 65 K of 10 MW Fully-Superconducting Synchronous Generators for Electric Aircraft - Hiromasa Sasa (Kyushu University)  
1:15 PM
TUE-PO1-509 Maglev and Levitation I (until 3:15 PM)
1:15 PM A propulsion-function-integrated HTS maglev system based on reversed excitation mode of electromagnetic guideway - Wei Hong (Tianjin University)  
1:15 PM Analysis of dynamic thermal and mechanical behaviors of HTS magnet for high-speed superconducting maglev - Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
1:15 PM Basic Study on Stable Levitation for Magnetically Levitated Mover (MAGLEM) Using High Tc SC Coils - Prof. Mochimitsu Komori (Kyushu Institute of Technology)  
1:15 PM Characteristics of magnetic force interaction of СС-tape windings with a permanent magnet guideway. - Mr Maxim Osipov (National Research Nuclear University MEPhI)  
1:15 PM Comparative Study between E-Shaped and Fan-Shaped Electromagnetic Guideway for HTS Maglev - Mr Yan Zhang (Tianjin University)  
1:15 PM Design and Performance for Wireless Power Charging Module combined with HTS Resonance Coils under Different Frequency Ranges in Superconducting MAGLEV Trainv - Yoon Do Chung (Suwon Science College)  
1:15 PM Improvement of the propulsion force by the excitation principle of the propulsion coil in the permanent magnet-HTS hybrid Magnetically levitated transport system - Alex Hitoshi Takinami (Kansai University)  
1:15 PM Levitation properties of magnetic attraction type levitation system having HTS bulk and HTS racetrack magnet - Kota Nakamura (Sophia University)  
1:15 PM Numerical study on dynamic characteristics of stack-type HTS Maglev system based on H-formulation - Wenjiao Yang (Southwest Jiaotong University)  
1:15 PM Running State Detection of HTS Pining Maglev System Based on Deep Learning Algorithms - Dr Zhihao Ke (Applied Superconductivity Laboratory, State Key Laboratory of Traction Power, Southwest Jiaotong University)  
1:15 PM Simulation and experimental validation of superconducting magnetic levitation suspension system - Shuhao Peng  
1:15 PM
TUE-PO1-513 SMES, Transformers, Wireless Power Transfer (until 3:15 PM)
1:15 PM [Invited] Preliminary tests 12 T REBCO isolated solenoid magnet used as compact 1 MJ SMES. - Julien Vialle (Institut Néel CNRS)  
1:15 PM AC Loss Measurement of Double Pancakes Wound with MgB2 Rutherford Type Superconductor - Toshihiro Komagome (MAYEKAWA MFG. Co., Ltd.)  
1:15 PM AC loss reduction on a 6.5 MVA/25 kV HTS traction transformer by exploiting asymmetric conductor critical current - Ms Yue Wu (Beijing Jiaotong University)  
1:15 PM Basic study on coil structure for high-temperature superconducting cable termination applying a wireless power transmission system - Dr Ryota Inoue (Okayama University)  
1:15 PM Current Source Converter Based Photovoltaic Synchronous Generator Incorporated with a SMES - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)  
1:15 PM Design and Simulation of a 150 kVA Single-Phase HTS Transformer with 1G/2G Hybrid HTS Tapes - Ziyuan Sun (NCEPU) Wei Pi (North China Electric Power University) Yu Yang (North China Electric Power University) Ruiqi Wang (North China Electric Power University) Zhaoyu Zhang (North China Electric Power University)  
1:15 PM Design of 10MJ toroidal field D-type superconducting energy storage magnet - Xinyu Zou (Huazhong University of Science and Technology)  
1:15 PM Design Study of 3φ-10 MVA-6.9/1.0 kV REBCO Superconducting Transformers with Lightweight and Current-Limiting Function for an E-aircraft Propulsion System - Masashi Sumida (Kyushu University)  
1:15 PM Evaluation of operating characteristics of coils wound with no-insulation REBCO bundle conductor for SMES - Mr Yu Miyamoto (Waseda University)  
1:15 PM Investigation of HTS Power Devices Cooled by LN2/CF4 Mixture - Dr Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Sciences)  
1:15 PM Multi-Input, Long-Distance, HTS-Based Wireless Charging System for Undersea Sensor Networks - Mr Xiaoyang Tian (HKU)  
1:15 PM Optimized configurations for enhancing the interaction capacity between permanent magnet and superconductor coil - Mr Wenxin Li (Tianjin University)  
1:15 PM Study on Low Loss Coil Structure for High Energy Density of a Wireless Power Transmission System Using High Temperature Superconducting Coils for Railway Vehicle - Dr Ryota Inoue (Okayama University)  
1:15 PM Study on thermal stability of transformer under external thermal disturbance - Binyi Tian  
1:15 PM The influence of SMES magnet operation parameters on voltage distribution characteristic - Jing Shi (Huazhong University of Science and Technology)  
1:15 PM The research on double pancake coil of 1MJ high temperature superconducting magnet energy storage for the power system of NICA complex - Ming Li (Institute of Plasma Physics, Hefei Institutes of Physical Scien)  
1:15 PM Wind photovoltaic Synchronous Generating System integrating with a SMES for a Grid Forming Renewable Energy System - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)  
1:15 PM
TUE-PO1-606 High Tc Wires and Cables III (until 3:15 PM)
1:15 PM [Invited] CORC® cables with superior tensile strain performance : FEM and experiments - Anvar V A (University Of Twente)  
1:15 PM Axial and transverse loading model of CORC® cable considering initial contact from cabling process - Mr keyang wang (University of Twente)  
1:15 PM Current- transport properties of HTS-FAIR conductor at variable temperatures in high magnetic field - Yuta Onodera (National Institute for Fusion Science)  
1:15 PM Development and preliminary test of Aluminum stabilized Stack ReBCO Tape Cable - Dr Feipeng NING (Institute of High Energy Physics, Chinese Academy of Sciences)  
1:15 PM Evaluation of critical currents in Rutherford cables made of quasi-isotropic strands - Ye He (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University)  
1:15 PM Investigation of a novel transposed superconducting cable using REBCO coated conductors - Juan Wang (Institute of HKey Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, Chinaigh Energy Physics, Chinese Academy of Sciences, Beijing 100049, China)  
1:15 PM Research on fatigue characteristics of optical fiber applied in HTS cable - Yi Yue (Huazhong University of Science and Technology)  
1:15 PM Resistances between soldered YBCO tapes consisting of the stacked cable - Mr Kodai Yoshimo (kagoshima-university)  
1:15 PM Stability and current sharing in YBCO cables – impact of broken elements - FEM modeling - Dr Milan Majoros (The Ohio State University)  
1:15 PM
TUE-PO1-609 Stability and Mechanical Properties (until 3:15 PM)
1:15 PM Angular dependences of critical current for REBCO coated conductors under bending strains - Mr Yuuta Kurihara (tokai university)  
1:15 PM Bending and Twisting Properties of Quasi-isotropic Superconducting Strand at Liquid Helium Temperatures Based on Laminate Theory - Ziyuan Sun (NCEPU)  
1:15 PM Conductive micro-path for current sharing between REBCO tapes in high-Tc superconducting conductors to improve stability - Hiroyuki Yamada (Nagoya University)  
1:15 PM Evaluation for Critical Current of REBCO coated conductor under various tensile strains and magnetic field angles. - Mr Kimito ISHIZUKA (Tokai University)  
1:15 PM Investigations of stability of the second generation HTS composites under of current loads at various regimes - Svetlana Veselova (NRNU MEPhI)  
1:15 PM Mechanical and electromechanical behavior of REBCO coated conductors under combined tensile-bending deformation - Mr Yingzheng Pan (Lanzhou University)  
1:15 PM Study on AC Over-Current Characteristics with the Physical Properties of the Outer Layer of REBCO Superconducting Wire Having Composite Structure Using RF Sputtering Deposition Method - Mr Sang Jae Ban (Jeonbuk National University)  
1:15 PM The electrical behavior of stacked coated conductors concerning the interlayer resistance - Hao Zhou (Department of Electrical Engineering, Shanghai Jiao Tong University)  
1:15 PM The Study on Quench properties of 2G HTS coils using the tapes by Holing and Hole filling process - Dong-Woo Ha (Korea Electrotechnology Research Institute)  
1:15 PM
TUE-PO1-615 Structural Materials for Magnets (until 3:15 PM)
1:15 PM Effect of rare earth substitution on the structural, electrical and magnetic properties on the piezoelectric A1-xSrxTiO3 system - Dr Adolfo Quiroz (Universidad Tecnológica de Xicotepec de Juárez)  
1:15 PM Evaluation of mass production results of cryogenic structural stainless steels for ITER toroidal field coil - Mr Takeru Sakurai (QST)  
1:15 PM Research on Nondestructive Examination of Jacket Sections for CFETR TF Coil - Dr XIAOCHUAN LIU  
1:15 PM Silver nanowires - copper composite wires for non-destructive pulsed fields : importance of avoiding the formation of a silver/copper alloy relative to the electrical resistivity and the tensile strength - Simon TARDIEU (Laboratoire National des Champs Magnétiques Intenses, EMFL, CNRS-INSA-UGA-UPS)  
1:15 PM Thermal resistance between metallic surfaces of copper and stainless steel at different temperatures and contact pressures for high current HTS Cable-in-Conduit Conductors - Dr Nadezda Bagrets (Karlsruhe Institute of Technology)  
1:15 PM
TUE-PO1-705 Quench Detection I (until 3:15 PM)
1:15 PM A Pulse Forming Network Power Supply for Quench Protection Heaters - Dr Bert Green (National High Magnetic FIeld Lab)  
1:15 PM An electro-thermal coupling model of quench protection using nonlinear quench-back for superconducting magnets - Dr Yujin Tong (Institute of Modern Physics, Chinese Academy of Sciences)  
1:15 PM Choice of 2G HTS tape for magnet design according to quench protection requirements. - Dmitry Sotnikov (Tampere University)  
1:15 PM Detecting quench in HTS conductors with LTS conductors — a theoretical and numerical analysis - Rui Kang (Institute of High Energy Physics, CAS)  
1:15 PM Experimental study on quench protection method for HTS coil that uses Cu tape co-wound with HTS tape - Mr Ryohei Shimada (Sophia University)  
1:15 PM Quench protection of a large aperture 15 T Cable Test Facility Nb3Sn Magnet - Vittorio Marinozzi (FNAL)  
1:15 PM Quenching HTS Pancake Coils using Frequency Loss Induced Quench Protection System. - Kikelomo Ijagbemi (National High Magnetic Field Laboratory, Center for Advanced Power Systems)  
1:15 PM Simulation and Experiments on an AC-Injection Active Protection Scheme for a Conduction Cooled, React-and-Wind, MgB2 MRI Coil Segment - Ms Danlu Zhang (The Ohio State University)  
1:15 PM Superconducting Magnet Energy Extraction with Varistors to Reduce Quench Voltages and Hot-Spots - Dr Tom Galvin (M&I Materials Ltd)  
1:15 PM Test Results of Alternative Magnet Technologies for HTS Magnet Quench Detection and Protection - Daniel Davis (FSU/NHMFL)  
1:15 PM The influence of metal plates on quench protection of high temperature superconducting pancake coils - Zhen Lu (Shanghai Jiao Tong University)  
1:15 PM
TUE-PO1-708 Quench Analysis II (until 3:15 PM)
1:15 PM A Novel Quench Detection Method for SMES - Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Science)  
1:15 PM Analysis of the Quench Experiments on HTS conductors - Ortensia Dicuonzo (EPFL-SPC)  
1:15 PM Development of quench analysis model for single copper–plated multifilament coated conductor - Yuto Torii (Kyoto University)  
1:15 PM Increased Quench Energy Threshold in Nb3Sn Strands with High Heat Capacity - JACOB ROCHESTER (The Ohio State University)  
1:15 PM Numerical investigation of thermoelastic coupling behaviors of stacks of high temperature superconductor during a quench - Dr Yujin Tong (Institute of Modern Physics, Chinese Academy of Sciences)  
1:15 PM Quench analysis and experiment of FECR prototype Nb3Sn superconducting magnet - shijun zheng (Institute of Modern Physics，Chinese Academy of Sciences)  
1:15 PM Quench Analysis of the 9.4-T Whole-Body MRI Superconducting Magnet - Shunzhong Chen (Institute of Electrical Engineering, Chinese Academy of Sciences and The University of Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences and The University of Chinese Academy of Sciences)  
1:15 PM Quench Dynamics testing and 3D modeling of VIPER HTS Cable - Erica Salazar (Massachusetts Institute of Technology)  
1:15 PM
TUE-PO1-711 Losses in conductors and coils (until 3:15 PM)
1:15 PM AC Loss Calculation on Stacked HTS YBCO Tapes Based on Magnetic Field Characteristic Parameters Analysis - Ms Liu Xinyi (Hunan University) Ms Chang Niu (Hunan University)  
1:15 PM AC loss measurement and simulation in a REBCO coil assembly utilizing two types of low-loss magnetic flux diverters - Mr Shuangrong You (Victoria University of Wellington)  
1:15 PM AC loss measurement of MgB2 superconducting coils under rotating magnetic field - Yutaka Terao (The University of Tokyo)  
1:15 PM AC loss simulation of NI REBCO pancake coils in external low-frequency magnetic field - Kazuhiro Daiho (Hokkaido University)  
1:15 PM Demagnetization rate of no-insulation HTS coil for persistent-current operation in alternating fields - zhuoyan zhong (Shanghai Jiaotong University)  
1:15 PM Low field MgB2 and NbTi fast ramped coils: temperature behaviours empirical comparison. - Dr Martina Neri (ASG Superconductors) Mr Lorenzo Mauro (ASG Superconductors) Dr Alessio Capelluto (ASG Superconductors)  
1:15 PM Magnetization Loss of no-insulation high temperature superconductor coil exposed to background fields - Wenbo Xue (Shanghai Jiao Tong University)  
1:15 PM Measurement of AC loss characteristics of HTS sample coils under the conditions assumed for use in power electronics devices - Mr Waku FUNAKOSHI (Kagoshima University)  
1:15 PM The critical properties and AC loss characteristics of the developed ultra-fine and flexible Nb3Al superconducting wires - Mr Hibiki Fukuda (Okayama University)  
1:15 PM
TUE-PO1-714 Magnetization and Field Quality Ⅱ (until 3:15 PM)
1:15 PM A System for Magnetic Measurement of the Triplet Quadrupoies for DTL - Jing Yang  
1:15 PM Energization waveform for reducing Screening Current-induced Magnetic Field in No-Insulation REBCO Coil Systems - Mr Shogo Murakami (Waseda University)  
1:15 PM Field quality of the 4.5 m long MQXFA pre-series magnets for the Hi-Lumi LHC Upgrade as observed during magnet assembly - Xiaorong Wang (Lawrence Berkeley National Laboratory)  
1:15 PM Flux Creep in Bi:2212 Rutherford Cables for Particle Accelerator Applications - JACOB ROCHESTER (The Ohio State University)  
1:15 PM Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab - Joseph DiMarco (Fermilab)  
1:15 PM Numerical evaluation of screening current-induced magnetic field in HTS coil system of Skelton Cyclotron for targeted alpha-particle therapy - Kodai SHIRAI (Waseda University)  
1:15 PM The Effects of Conductor Magnetization on the Magnetic Field in an Accelerator Magnet System with Various Conductors - Michael Green (Lawrence Berkeley Laboratory)  
1:15 PM The Magnetic Center Alignment Based on FECR Superconducting Ion-source After Cryostat Installation - yan bing Yang (Institute of Modern Physics. Chinese Academy of Sciences)  
1:15 PM
TUE-PO1-715 Mechanical Behavior of Coil I (until 3:15 PM)
1:15 PM Deformation Analysis of no-insulation REBCO coils considering turn-to-turn contact configuration - Dr Hiroshi Ueda (Okayama University)  
1:15 PM Effects of Friction Force on the Stress-Strain Characteristics of a High-Temperature Superconducting Coil Co-Wound Using Intentionally Scratched Stainless Steel and GdBCO Tape - Mr Yunyeol Ryu (Korea University)  
1:15 PM Numerical Evaluation of Reinforcement Structure against Electromagnetic and Thermal Stresses in Stacked REBCO Pancake Coils - Mr Keisuke Naito (Okayama University)  
1:15 PM Numerical evaluation of the potential methods of reducing screening-current-induced stress in NI-REBCO coil - Zhaofei Jiang  
1:15 PM Numerical modelling and calculation of mechanical properties of HTS magnet wound with multi-thickness armored REBCO tapes - Xie Pengyang (Southwest Jiaotong University)  
1:15 PM Numerical Modelling of the Interfacial Debonding in Superconducting Magnets - Giorgio Vallone (Lawrence Berkeley National Lab. (US))  
1:15 PM Strain measurements of a combined superconducting magnet on sextupole coils and solenoids during its assembly and excitation - Mr Canjie Xin  
1:15 PM The influence of friction between layers of coil on the magneto-mechanical behaviors of YBCO superconducting magnet - Dr Qiang Hu (Institute of Modern Physics of Chinese Academy of Science)  
1:15 PM The pre-compression study for CFETR central solenoid model coil - Xianwei Wang  
1:15 PM
TUE-PO1-720 Design & Diagnostics (until 3:15 PM)
1:15 PM Advanced electrical quality assurance methods for the series production of the superconducting coils of the HL-LHC high order corrector magnets - Dr Marco Prioli (INFN Milano (IT))  
1:15 PM Combined method of mapping fields in pulsed bending magnets - Konstantin Shtro (Budker Institute of Nuclear Physics)  
1:15 PM Designing a Magnetic Measurement Data Acquisition and Control System with Reuse in Mind: A Rotating Coil System Example - Dr Jerzy Nogiec (Fermilab)  
1:15 PM Fine tuning of the inner dipole design of MCBXF magnets - Jesus Angel Garcia Matos (Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT) & Universidad Politécnica de Madrid (UPM))  
1:15 PM Impact of Rotor Eccentricity and Current Harmonics on High-Speed Permanent Magnet Generator Performance for Microturbine Applications - Dr Thanh Anh Huynh (National Cheng Kung University)  
1:15 PM Reactor Vibration Reduction Using Global Topology Optimization Algorithms - Mrs Tong Ben (China Three Gorges University)  
1:15 PM Self-protecting behavior of Metal-as-Insulation windings made of High Temperature Superconductor tapes - philippe fazilleau (cea)  
1:15 PM
TUE-PO1-722 Model Coil I (until 3:15 PM)
1:15 PM [Invited] Modelling and characterization of a ReBCO HTS degaussing demonstrator - Izak Hanse (University of Twente)  
1:15 PM A study on the electrical contact resistance and thermal conductivity of soldered-metal insulation coil with conduction cooling - Jaehwan Lee (Changwon National University)  
1:15 PM Analysis and Experiments on Electrical and Thermal Characteristics of REBCO Racetrack Coil co-wound by Stainless Steel Tape under asynchronous rotating magnetic field - Yoon Seok Chae (Jeju National University)  
1:15 PM Design optimization and fabrication of HTS magnet with stepped cross-section - Songlin Li (Southwest Jiaotong University, Chengdu, China)  
1:15 PM Effects of thermal cycle and winding tension on contact resistivity of an intra-Layer No-Insulation (LNI) REBCO coil - Mr Keisuke Takahashi (Sophia University (Graduate school))  
1:15 PM Electromagnetic characteristics of two-tape co-winding REBCO coil including local defects - Toru ABE (Tohoku university)  
1:15 PM Experimental Study on the Accuracy of the Proposed LFAC Method for Measuring the Contact Resistance of NI HTS Coils - Kohei Miyamoto (Okayama University)  
1:15 PM Fabrication of Racetrack Type Double-pancake Coils Using 2G Tapes - Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences) Prof. Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)  
1:15 PM Investigation on Quench and Normal Zone Propagation Behaviors of REBCO Coil wound by vanadium III oxide turn-to-turn insulator - Ji Hyung Kim (Jeju National University)  
1:15 PM Investigation on thermal and electrical stabilities of REBCO coil insulated by vanadium III oxide under various disturbance environments - Ji Hyung Kim (Jeju National University)  
1:15 PM Temperature Considered Active Feedback Control of No-Insulation HTS Magnet - Jeonghwan Park (Seoul National University)  
1:15 PM Thermal and electrical characteristics of NI HTS coil fabricated by diffusion bonding technique - Junil Kim (Korea Electrotechnology Research Institute, Chanwon National Unviersity)  
1:15 PM
TUE-PO1-804 Flux pumps (until 3:15 PM)
1:15 PM A Kilo-Amp Linear-Motor Type Flux Pump - Chao Yang (Sichuan University)  
1:15 PM A miniaturized high temperature superconducting flux pump - Dachuan Chen (Shanghai Jiao Tong University)  
1:15 PM A Novel Switch Design for Compact HTS Flux Pumps - Adil Shah (University of Cambridge)  
1:15 PM Accurate Control the DC Output Current of the Linear-Motor Flux Pump Based on the Four Quadrant Method - Zhenxuan Yang (Sichuan University)  
1:15 PM High performance switch design for HTS transformer rectifier type flux pump - Jun Ma (Hunan University)  
1:15 PM High temperature superconducting magnet wireless power transmission technology based on flux pump - Yujia Zhai (Hunan University)  
1:15 PM Improve the Central Magnetic Field of an HTS Magnet with Multi Linear-Motor Flux Pumps Based on Genetic Algorithm - Mr Jiafu Wei (Sichuan University)  
1:15 PM MATLAB Implementation of Optimized HTS Transformer-Rectifier Flux Pump Using HTS Dynamic Voltage Switches - Ismail Patel (Cambridge University)  
1:15 PM Minimizing the heat losses of a self-switching kA-class rectifier flux pump - Mr Muhammad Iftikhar (University of Strathclyde United Kingdom)  
1:15 PM Persistent Current Stabilization and Tuning of Bi-2223 HTS Coils - Lucas Brouwer (Lawrence Berkeley National Laboratory)  
1:15 PM Study on the Through Duwar Wall Excitation of YBCO Coil Based on Linear-motor Type Flux Pump - Chenling Xiong (Sichuan University)  
1:15 PM
TUE-PO1-LN1 Late News I (until 3:15 PM)
1:15 PM A New Active Field Uniformity Improvement Method with Optimally Designed Compensation coils for Low-temperature Superconducting Magnets - Jaeyoung Jang (Korea university of technology and education)  
1:15 PM Coil error analysis of a curved CCT magnet applied to a superconducting gantry - Mrs Chunyi Li (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)  
1:15 PM Conceptual Design of a C-shaped 6.4 T Superconducting Dipole Magnet - Alan Abdalad Vianna (CNPEM)  
1:15 PM Construction of Cryogen-Free 4.3T Superconducting Wiggler for NSLS-II Ring - Toshiya Tanabe (Brookhaven National Laboratory)  
1:15 PM Current-sharing between filaments and voltage-current characteristics of copper-plated multifilament coated conductors - Naoyuki Amemiya (Kyoto University)  
1:15 PM Design and optimization of combined-function quadrupole-sextupole magnets - Mr Chen Geng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology)  
1:15 PM Design and test of a rotating magnetic field measurement system based on PCB technique - Dr Wenjie Han (Huazhong University of Science and Technology)  
1:15 PM Innovative collaring concept for MQYY superconducting quadrupole magnets of HL-LHC Insertion Region - Amaury Porhiel (Sigmaphi)  
1:15 PM Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb3Sn Low-β Quadrupole MQXF - Ignacio Aviles Santillana (CERN)  
1:15 PM Optimum field shaper design for electromagnetic forming by balancing trade-off among energy efficiency, field distribution, and thermo-mechanical loadings - Zhipeng Lai (Huazhong University of Science and Technology)  
1:15 PM Record High Ramping Rates in HTS Based Superconducting Accelerator Magnet - Dr Henryk Piekarz (Fermilab)  
1:15 PM Trapped field properties of MgB2 bulks prepared via an in-situ infiltration-reaction process using refined boron powders - Tomoyuki Naito (Iwate University)  
3:15 PM --- Break ---
3:30 PM
Plenary: Robert Herzog (Bruker Switzerland AG); Commercial Ultra-High-Field NMR Magnets with HTS Conductors - Gen Nishijima (National Institute for Materials Science) Hideaki Maeda (j) (until 4:15 PM)
3:30 PM [Plenary] Commercial Ultra-High-Field NMR Magnets with HTS Conductors - Dr Robert Herzog (Bruker Switzerland AG)  
4:15 PM --- Break ---
5:00 PM --- Opening Ceremony ---
5:30 PM --- Break ---
9:00 PM --- Online Poster Sessions #1 *See the on-site poster session at 13:15 for presentation details* ---
12:30 PM --- Lunch ---
1:45 PM
Plenary: Young Scientist Plenary - Satoshi Awaji (Tohoku University) Laura Garcia Fajardo (Lawrence Berkeley National Laboratory) (until 2:45 PM)
1:45 PM Introduction - Laura Garcia Fajardo (Lawrence Berkeley National Laboratory)  
1:50 PM [Plenary] A circular economy using superconductors: magnetic density separation - Jaap Kosse (PSI - Paul Scherrer Institut)  
1:57 PM [Plenary] Coupling superconducting magnet technology with large momentum acceptance beamlines to enable lightweight, high performance gantries for ion beam cancer therapy - Lucas Brouwer  
2:04 PM [Plenary] HTS Superconducting Joint for Persistent Current Mode Magnets - Yasuaki Takeda (NIMS)  
2:11 PM [Plenary] Nb3Sn: beyond NbTi, for moving beyond the Standard Model - Barbara Caiffi  
2:18 PM [Plenary] Tokamaking, some reflections and afterthoughts - Gherardo Romanelli (ENEA)  
2:25 PM [Plenary] The benefits of the analytical approach for the optimization of superconducting magnets from the early design stage - Alexandre Louzguiti (CEA French Alternative Energies and Atomic Energy Com)  
2:32 PM Discussion  
2:45 PM
Plenary: Eric Forton (IBA - Ion Beam Applications); Radiation Therapy Systems - Toru Ogitsu Kazuya Takahata (until 3:30 PM)
2:45 PM [Plenary] Radiation Therapy Systems - Eric Forton (IBA - Ion Beam Applications)  
3:30 PM --- Break ---
4:00 PM
WED-OR3-201 Fusion Magnets I - Thierry Schild (Iter) Hitoshi Tamura (National Institute for Fusion Science) (until 6:00 PM)
4:00 PM [Invited] Strategy for developing the EU-DEMO Magnet System in the Conceptual Design Phase - Valentina Corato (ENEA)  
4:15 PM [Invited] Engineering Design and R&D Work for Toroidal Field Superconducting Magnet of CFETR - Prof. Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)  
4:30 PM Design study of superconducting TF coil concept with rectangular conductor layer winding with high manufacturability and insulation reliability for JA DEMO - Dr Hiroyasu Utoh (National Institutes for Quantum and Radiological Science and Te)  
4:45 PM Development of the “Demo4” 1.5m-scale spherical tokamak HTS magnet demonstrator at Tokamak Energy - Greg Brittles (Tokamak Energy)  
5:00 PM DTT: a challenging framework for a sound superconducting magnets design - Aldo Di Zenobio (ENEA)  
5:15 PM Design and structural assessment overview of the DTT TFC system - Gherardo Romanelli (ENEA)  
5:30 PM Test and Analysis of Stacked-Tape-Wound Laboratory-Scale NI HTS TF Module Coil - Jung Tae Lee (Seoul National University)  
4:00 PM
WED-OR3-503 Magnet System, Novel and Other Applications - philippe fazilleau Gen Nishijima (National Institute for Materials Science) (until 6:00 PM)
4:00 PM [Invited] Assembly and Test of the world’s first conduction-cooled NbTi Magnet System for Magnetic Density Separation - Mr Goncalo Tomas (University of Twente)  
4:15 PM Development of Bi-2223 magnet for magnetic refrigeration system - Dr Gen Nishijima (National Institute for Materials Science)  
4:30 PM Manufacturing technologies for cost effective HTS coils and magnet systems - Dr Cornelia Hintze (THEVA Dünnschichttechnik GmbH)  
4:45 PM Design and Test of a Superconducting Lens for an Ultra-Stable Electron Microscope - Lucas Brouwer (Lawrence Berkeley National Laboratory)  
5:00 PM Characterization of a soldered metal insulation HTS ReBCO demonstrator coil for an astroparticle physics experiment in space - Magnus Dam  
5:30 PM Design of a Bifilar HTS Switching Element Using Iron-Core Field Coils - James Rice (Victoria University of Wellington)  
5:45 PM Cryogenic DC/DC converter for superconducting magnet applications - Mr Abdelrahman El-Wakeel (University of Strathclyde)  
4:00 PM
WED-OR3-702 Magnetization and Loss - Yuji Tsuchiya (Nagoya University) Emmanuele Ravaioli (CERN) (until 6:00 PM)
4:00 PM Magnetization Relaxation by Shielding Current in Commercial REBCO Tapes - Dr Yuji Tsuchiya (Nagoya Univ.)  
4:15 PM Modeling of screening currents in superconducting non-insulated REBCO magnets: fast and accurate 2D approach - Dr Enric Pardo (IEE Slovak Academy of Sciences)  
4:30 PM Field Quality Measurements of High-Temperature Superconducting Canted Cosine Theta Accelerator Magnets - Cory Myers (Lawrence Berkeley National Lab)  
4:45 PM Magnetic Measurements Results and Analysis of the First Batches of Superferric Magnets for the HL-LHC High Order Field Correction - Dr Ernesto De Matteis (INFN Milan - LASA)  
5:00 PM New Methods to Reduce Fast-Ramping AC loss in High Temperature Superconductors Coils at High Currents of 500 A – 800 A - Honghai Song (Stony Brook University)  
5:15 PM 3D magnetic field maps and alignment of the Superconducting Multipole Triplet (SMT) - Dr Alexandre Esper (GANIL)  
5:30 PM Analytical modeling of coupling losses in CICCs, extensive study of the COLISEUM model - Romain Babouche (CEA Cadarache - IRFM)  
5:45 PM Dynamic Simulation on Flow Characteristics of KSTAR PF Magnet Cryogenic Network - Sangjun Oh (Korea Institute of Fusion Energy)  
6:00 PM --- Break ---
6:25 PM
WED-SS Special Session "Lesson learned" - Pierluigi Bruzzone (EPFL-SPC) Satoshi Awaji (Tohoku University) (until 8:30 PM)
6:25 PM Introduction - Pierluigi Bruzzone (EPFL-SPC)  
6:30 PM [Invited] Successes & Failures in Design Solutions During the 30 Year Life of ITER (and how we could have improved) - Neil Mitchell  
6:50 PM [Invited] Lessons Learned in the Development of Accelerator Magnets based on Nb3Sn and HTS - Stephen Gourlay (LBNL)  
7:10 PM [Invited] Lessons learnt in HL-LHC interaction region superconducting magnets: two case studies - Dr Ezio Todesco (CERN)  
7:30 PM [Invited] Some Lessons Learned During 27 Years Operating Above 27 Tesla. - Mark Bird (FSU)  
7:50 PM [Invited] Lessons Learned in No-insulation HTS Magnet Technology - Seungyong Hahn (Seoul National University)  
8:10 PM [Invited] Bringing a Nuclear Quality Approach to Superconducting Magnets - Liao Min (ITER organization)  
8:30 PM --- Break ---
9:00 PM --- Online Poster Sessions #2 *See the on-site poster session at 10:30 for presentation details* ---
12:00 PM --- Lunch ---
2:00 PM
Plenary: Mark Palmer (BNL); Muon Colliders and Their Magnet Technology Needs - Akira Yamamoto (High Energy Accelerator Research Organization (JP)) Qingjin XU (until 2:45 PM)
2:00 PM [Plenary] Muon Colliders and Their Magnet Technology Needs - Dr Mark Palmer (BNL)  
2:45 PM
Plenary: Haruyuki Murakami (QST); Overview of Construction and First Commissioning Results of JT-60SA Superconducting Magnets - Norikiyo Koizumi (QST) Sangjun Oh (Korea Institute of Fusion Energy) (until 3:30 PM)
2:45 PM [Plenary] Overview of Construction and First Commissioning Results of JT-60SA Superconducting Magnets - Haruyuki Murakami (National Institutes for Quantum and Radiological Science and Te)  
3:30 PM --- Break ---
4:00 PM
THU-OR4-202 Fusion Magnets II - Hideki Kajitani (National Institutes for Quantum and Radiological Science and Te) Laura Savoldi (Politecnico di Torino) (until 6:00 PM)
4:00 PM [Invited] The SPARC Toroidal Field Model Coil - Prof. Zachary Hartwig (MIT)  
4:15 PM About the first 6 toroidal field coils and 2 poloidal field coils completed by EU for ITER - Alessandro Bonito-Oliva (Fusion for Energy)  
4:30 PM Completion of the first TF coil in the second manufacturing line in Japan - Dr Norikiyo Koizumi (QST)  
4:45 PM Start of the ITER Central Solenoid Assembly - Thierry Schild (Iter)  
5:00 PM Completion and Installation of the ITER Lower Poloidal Field Coils PF5 & 6 - Liao Min (ITER organization)  
5:15 PM Moving Toward Completion of manufacturing of ITER PF1 Coil - Mr Byung Su LIM (ITER)  
5:30 PM Further Development of the W7-X Magnet System FE Global Model in Preparation for Enhanced Operation Phase - Dr Victor Bykov (Max-Planck Institute for Plasmaphysics)  
4:00 PM
THU-OR4-401 Magnets for Medical, Biological, and Analytical Applications - Enrico Felcini (Fondazione CNAO (IT)) Yu Suetomi (until 6:00 PM)
4:00 PM [Invited] First images of the Iseult Whole Body 11.7 T MRI - Dr Lionel Quettier (CEA)  
4:15 PM Study of the Basic Properties of Meter-class REBCO High-Temperature Superconducting Coils for MRI - Mr Hideaki Miura (Mitsubishi Electric Corp.)  
4:30 PM Design of a Curved Superconducting Combined Function Bending Magnet Demonstrator for Hadron Therapy - Mikko Karppinen (CERN)  
4:45 PM Mechanical and thermal analysis of an HTS superconducting magnet for an achromatic gantry for proton therapy - Jose Luis Rudeiros Fernandez (LBNL)  
5:00 PM Preliminary study of 4 T superconducting dipoles for a light rotating gantry for ion-therapy - Lucio Rossi (Università degli Studi e INFN Milano (IT))  
5:15 PM Feasibility Study of GaToroid Gantries for Carbon Ions - Dr Enrico Felcini (CNAO - Centro Nazionale di Adroterapia Oncologica)  
5:30 PM Development of a persistent-mode 400 MHz (9.39 T) LTS/Bi2223 NMR magnet with a Bi2223 superconducting joint - Yasuaki Takeda (NIMS)  
5:45 PM First NMR Relaxometry using Outer Field of Single-sided HTS Bulk Magnet activated by Pulsed Field - Dr Masato Takahashi (RIKEN)  
4:00 PM
THU-OR4-704 Stability and Quench - Naoki HIRANO (National Institute for Fusion Science(NIFS)) arnaud badel (CNRS) (until 6:00 PM)
4:00 PM An HTS Model Magnet for MRI Systems Equipped with Electrically Conductive Epoxy Resin Used in Quench Protection - Dr Sadanori Iwai (Toshiba Energy Systems & Solutions Corporation)  
4:15 PM Transient Electro-Magnetic and Thermal Simulation of HTS Non-Insulated Coils - Dr Jeroen van Nugteren (LittleBeast)  
4:30 PM Experimental analysis of quench behavior in a Cable-In-Conduit-Conductor cooled by stagnant superfluid helium - Unai DURAÑONA (CEA)  
4:45 PM Quench protection study of a large scale REBCO magnet with additional copper tapes - Mr Shogo Muto (Fujikura Ltd.)  
5:00 PM Probability of premature quenching of HTS coil due to local reduction of critical current - Fedor Gömöry (Slovak Academy of Sciences)  
5:15 PM Ultrasonic Waveguides for Quench Detection in HTS Magnets - Maxim Marchevsky (Lawrence Berkeley National Laboratory)  
5:30 PM Optical fiber based quench detection in HTS applications using feature extraction on response signal - Arooj Akbar (École polytechnique fédérale de Lausanne ‐ EPFL)  
5:45 PM [Invited] Design, fabrication and soundness test of a Bi2223 magnet immersed in liquid hydrogen - Prof. Shinsaku Imagawa (National Institute for Fusion Science)  
6:00 PM --- Break ---
6:30 PM
THU-OR5-301 High Field Magnet - Xavier CHAUD (Laboratoire National des Champs Magnétiques Intenses ‐ European Magnetic Field Laboratory, UPR3228 Centre National de la Recherche Scientifique, Univ. Grenoble ‐Alpes, Institut National des Sciences Appliquées de Toulouse, Univ. Paul Sabatier) Gen Nishijima (National Institute for Materials Science) (until 8:30 PM)
6:30 PM [Invited] 43+T Grenoble Hybrid Magnet: From final Assembly to Commissioning of the Superconducting Outsert - Dr Pierre Pugnat (LNCMI-Grenoble, CNRS, Univ. Grenoble-Alpes)  
6:45 PM [Invited] Status of the HFML-Nijmegen 45 T Hybrid Magnet - Mr Andries den Ouden (HFML, Radboud University, Nijmegen, The Netherlands)  
7:00 PM Design considerations for practical very high field cryogen-free superconducting magnets: 33 T and beyond - Prof. Arnaud Badel (Tohoku University)  
7:15 PM Design of DC Magnet for Super-X Test Facility - Houxiang HAN  
7:30 PM Engineering design of a large aperture 15 T cable test facility dipole magnet - Jose Luis Rudeiros Fernandez (LBNL)  
7:45 PM Design of a full Superconducting 35 T Magnet with a 20 T REBCO Insert - Liangjun Shao (Tsinghua University)  
8:00 PM 25T/52mm warm-bore All YBCO superconducting magnet designed for High-frequency Gyrotrons - Yunxing Song (Huazhong University of Science and Technology)  
8:15 PM 25.1T generation in 25T cryogen-free superconducting magnet with a modified Bi2223 insert - Satoshi Awaji (Tohoku University)  
6:30 PM
THU-OR5-501 Superconducting Rotating Machine, Levitation and Flywheel - Mark Ainslie (University of Cambridge) Taketsune Nakamura (Kyoto University) (until 8:30 PM)
6:30 PM [Invited] Experimental and theoretical study on power generation characteristics of 1 kW class fully high-temperature superconducting induction/synchronous generator using a stator winding with a bending diameter of 20 mm - Dr Tenghui Dong (Kyoto University)  
6:45 PM Performance analysis and evaluation of a hundred-kW HTS dynamic synchronous condenser prototype - Dr Peng SONG (the State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University)  
7:00 PM A Numerical and Experimental Study on Dynamic Operation of a Synchronous Rotating Machine with NI HTS Field Windings - Mr Uijong Bong (Seoul National University)  
7:15 PM Methods of Estimating AC Losses in Multi-filamentary Superconducting Windings with Spatial and Time Harmonics - Thanatheepan Balachandran (University of Illinois at Urbana Chamapign)  
7:30 PM T-A Formulation for Modelling and AC Loss Reduction Studies in a Superconducting Synchronous Generator for a 10 MW Wind Turbine - Carlos Roberto Vargas-Llanos (Karlsruhe Institute of Technology)  
8:00 PM A High-Speed Maglev Test Rig Designed for HTS Pining Levitation and Electrodynamic Levitation - Prof. Zigang Deng (Southwest Jiaotong University)  
8:15 PM Research on HTS flywheel energy storage system in China - Prof. Guomin Zhang (Key Laboratory of Applied Superconductivity, Chinese Academy of Sciences; Institute of Electrical Engineering, Chinese Academy of Sciences; University of Chinese Academy of Sciences)  
6:30 PM
THU-OR5-601 A15-type Superconducting Wires and Cables - TSUYOSHI YAGAI (Sophia University) Nobuya Banno (National Institute for Materials Science) (until 8:30 PM)
6:30 PM Improving critical current in ternary APC Nb3Sn superconductors by using internal oxidation method - Dr Xuan Peng (Hyper Tech Research Inc.)  
6:45 PM Multiphysics study of phase transformations in Nb3Sn strands during Heat Treatment - Arsenii GORYNIN (Universite Paris-Saclay (FR))  
7:00 PM Jelly-Roll Processed Nb3Al Super-Fine Monofilament Wires with Cu/non-Cu Ratio of 1.0 - Akihiro Kikuchi (National Institute for Materials Science)  
7:15 PM Root Cause of the Strain Irreversibility Cliff in RRP® Nb3Sn Wires - Dr Najib Cheggour (Florida State University)  
7:30 PM Dimensional Changes Measurement of Nb3Sn Cables and Strands during Heat Treatment Using Digital Image Correlation - Mahmoud Abdel Hafiz (Université Paris-Saclay)  
7:45 PM DC and AC characterization of a Low-Field Nb3Sn prototype conductor for a DEMO TF Coil - Chiarasole Fiamozzi Zignani (ENEA)  
8:00 PM Measurements of AC loss evolution in ITER TF Conductors - Kamil Sedlak (EPFL-SPC Lausanne)  
8:30 PM --- Break ---
9:00 PM --- Online Poster Sessions #3 *See the on-site poster session at 10:00 for presentation details* ---
12:00 PM --- Lunch ---
2:00 PM
Plenary: Masaru Tomita (Railway Technical Research Institute); Magnet Technology for Train - Jun-ichi Shimoyama (Aoyama Gakuin University) Nicholas Long (Robinson Research Institute) (until 2:45 PM)
2:00 PM [Plenary] Magnet Technology for Train - Masaru Tomita (Railway Technical Research Institute)  
2:45 PM --- Closing ---
4:00 PM --- Social event ---
Powered by Indico v3.3.7-pre