|
09:30
|
Registration
(until 10:20)
(Auditorium)
|
|
10:20
|
Opening welcome
-Dr
Daisuke Miyagi
(Tohoku University)
(until 10:30)
(Auditorium)
|
|
10:30
|
Session I
-Prof.
Zhenan Jiang
(Victoria University of Wellington)
(until 12:30)
(Auditorium)
|
|
10:30
|
Basic development studies for mineral insulated superconducting magnet using REBCO coated conductors.
-
Masami Iio
(High Energy Accelerator Research Organization (KEK))
(Auditorium)
|
|
11:00
|
Forced Flow Cooling of High Field, REBCO-Based, Fusion Magnets Using Supercritical Hydrogen and Helium
- Dr
Joseph Minervini
(Massachusetts Institute of Technology)
(Auditorium)
|
|
11:30
|
Electromagnetic and thermal modeling of small coil made from HTS round cable
-
Fedor Gömöry
(Slovak Academy of Sciences)
(Auditorium)
|
|
12:00
|
High-field magnets wound from CORC® cables or wires
-
Danko van der Laan
(Advanced Conductor Technologies)
(Auditorium)
|
|
|
09:00
|
Session III
-
Reinhard Heller
(Karlsruhe Institute of Technology)
(until 10:30)
(Auditorium)
|
|
09:00
|
Transient Heat Transfer Through the LHC Polyimide Cable Insulation
-
Tiemo Winkler
(UTwente)
(Auditorium)
|
|
09:30
|
Development and test of a dynamic model of the ITER CSMC He refrigerator. Part II: from 80 K to 4 K
- Dr
Roberto Bonifetto
(Politecnico di Torino)
(Auditorium)
|
|
10:00
|
Improved hydraulic model of cryogenic circuits for fusion magnet application
- Dr
DONGKEUN OH
(National Fusion Research Institute)
(Auditorium)
|
|
10:30
|
--- Coffee break ---
|
|
10:50
|
Session III
-
Reinhard Heller
(Karlsruhe Institute of Technology)
(until 11:50)
(Auditorium)
|
|
10:50
|
Thermal-hydraulic analysis of low temperature superconducting CFETR Central Solenoid Model Coil
- Dr
Roberto Bonifetto
(Politecnico di Torino)
(Auditorium)
|
|
11:20
|
Analytical Method for the Prediction of Quench Initiation and Development in Accelerator Magnets
-
Susana Izquierdo Bermudez
(CERN)
(Auditorium)
|
|
11:50
|
Session IV
(until 12:20)
(Auditorium)
|
|
11:50
|
Development of design for large scale conductors and coils using MgB2 for Superconducting Magnetic Energy Storage Device.
-
TSUYOSHI YAGAI
(Sophia University)
(Auditorium)
|
|
|
09:00
|
Session V
-Prof.
Arend Nijhuis
(University of Twente)
(until 10:30)
(Auditorium)
|
|
09:00
|
Basic Study on Effect of a Heat Pipe on Cooling Characteristic Improvement in a Tri-axial HTS Cable
- Dr
Daisuke Miyagi
(Tohoku University)
(Auditorium)
|
|
09:30
|
Thermal-hydraulic analysis of the HTS DEMO TF coil
-
Monika Lewandowska
(West Pomeranian University of Technology, Szczecin)
(Auditorium)
|
|
10:00
|
Assessment of the performance of a 20 kA REBCO current lead
- Dr
Reinhard Heller
(Karlsruhe Institute of Technology)
(Auditorium)
|
|
10:30
|
--- Coffee break ---
|
|
10:50
|
Session VI
-Prof.
Marco Breschi
(University of Bologna)
(until 12:20)
(Auditorium)
|
|
10:50
|
Three-dimensional electromagnetic field analysis model for ac loss calculations of HTS coils in superferric magnets
-
Yusuke Sogabe
(Kyoto University)
(Auditorium)
|
|
11:20
|
Simple analytical formulae to evaluate the irregular field in solenoid coils with high-temperature superconducting tape wires
- Dr
Yasunori Mawatari
(National Institute of Advanced Industrial Science and Technology (AIST))
(Auditorium)
|
|
11:50
|
New Screening Current Simulations on REBCO Pancake Coils
-
So Noguchi
(Hokkaido University)
(Auditorium)
|
|
|
12:30
|
--- Lunch ---
|
|
14:00
|
Session II
-
Fedor Gömöry
(Slovak Academy of Sciences)
(until 15:30)
(Auditorium)
|
|
14:00
|
Calculations and measurements of electromagnetic characteristics of striated and copper-plated coated conductors and their coils
-
Naoyuki Amemiya
(Kyoto University)
(Auditorium)
|
|
14:30
|
Numerical simulation on current distribution in multifilamentary HTS tape
-
Hiroshi Ueda
(Okayama University)
(Auditorium)
|
|
15:00
|
Design study on the quench protection system for the HTS magnet based on the I-V characteristics measured in the temperature range of 40-83K.
-
Kento Suzuki
(High Energy Accelerator Research Organization)
(Auditorium)
|
|
15:30
|
--- Coffee Break ---
|
|
15:50
|
Session II
-
Fedor Gömöry
(Slovak Academy of Sciences)
(until 17:50)
(Auditorium)
|
|
15:50
|
Applicability evaluation of quench detectable hybrid REBCO tape to HTS magnet for fusion reactors
- Dr
Satoshi Ito
(Tohoku University)
(Auditorium)
|
|
16:20
|
Quench Protection for the HTS Magnet in the Helical Fusion Reactor
- Dr
Yoshiro Terazaki
(National Institute for Fusion Science)
(Auditorium)
|
|
16:50
|
Quench behaviors of conduction-cooled coated conductors subject to transient and localized thermal disturbances
-
Xijie Luo
(Kyoto University)
(Auditorium)
|
|
|
12:20
|
--- Lunch ---
|
|
13:50
|
Session IV
(until 14:20)
(Auditorium)
|
|
13:50
|
Calculation of interstrand coupling losses in superconducting Rutherford cables with a continuum model
- Dr
Marco Breschi
(University of Bologna)
(Auditorium)
|
|
14:20
|
--- Coffee break ---
|
|
14:40
|
--- Lab tour ---
|
|
19:00
|
--- Social Dinner ---
|
|
|
12:20
|
--- Lunch ---
|
|
13:20
|
Session VI
-Prof.
Marco Breschi
(University of Bologna)
(until 15:20)
(Auditorium)
|
|
13:20
|
A pulse tube cryocooler driven by the superconducting linear compressor at 50 Hz
- Mr
Bokeum Kim
(KAIST)
(Auditorium)
|
|
13:50
|
AC loss simulation in a HTS 3-phase 1 MVA transformer using H formulation
-
Zhenan Jiang
(Victoria University of Wellington)
(Auditorium)
|
|
14:20
|
Electromechanical analysis of REBCO pancake coils reinforced by an outer-shell structure
-
Satoshi Awaji
(Tohoku University)
(Auditorium)
|
|
14:50
|
Strand level modeling on AC loss, current distribution and quenching of CICC conductors
- Dr
Arend Nijhuis
(University of Twente)
(Auditorium)
|
|
15:20
|
Wrap up session
(until 16:00)
(Auditorium)
|
|