MEDSI 2018

from Monday, June 25, 2018 (9:00 AM) to Friday, June 29, 2018 (1:30 PM)
Venue

        : Sessions
    /     : Talks
        : Breaks
Jun 25, 2018
Jun 26, 2018
Jun 27, 2018
Jun 28, 2018
Jun 29, 2018
AM
9:00 AM --- Registration ---
9:30 AM --- Bus departure from Venue to SOLEIL ---
11:00 AM --- SOLEIL Visit ---
9:00 AM --- Registration ---
9:30 AM --- Welcome Coffee ---
10:00 AM Conference Welcome - James Kay (D) Amor Nadji (Synchrotron SOLEIL) Mr TAVAKOLI Keihan (Synchrotron SOLEIL)  
10:30 AM JACoW cooperation and scientific edition for MEDSI - Manuel TILMONT (Synchrotron SOLEIL)  
10:50 AM TUKA01: Shining a light on synchrotron light - Dr Sylvain RAVY (Laboratory for Solid State Physics LPS ORSAY)  
9:00 AM WEKA01: Selection of materials and processes for vacuum, cryogenic and non-magnetic applications in particle accelerators - Dr Stefano SGOBBA (CERN)  
10:20 AM --- Coffee Break ---
10:50 AM
PRECISION MECHANICS (until 12:10 PM)
10:50 AM WEOAMA01: Offline Results of the New High-Dynamic DCM for Sirius - Renan Ramalho Geraldes (Brazilian Synchrotron Light Laboratory)  
11:10 AM WEOAMA02: Sample Stabilization for Tomography Experiments in Presence of Large Plant Uncertainty - Thomas Dehaeze (European Synchrotron Radiation Facility)  
11:30 AM WEOAMA03: High-Accuracy Small Roll Angle Measurement Method Based on Dual-Grating Diffraction Heterodyne Interferometer - Shanzhi Tang (Chinese Academy of Sciences Institute of High Energy Physics Beijing Synchrotron Radiation Laboratory)  
11:50 AM WEOAMA04: The Design of Exactly-constrained X-ray Mirror Systems for Sirius - Gabriel Claudiano (Brazilian Synchrotron Light Laboratory)  
9:00 AM THKA01: Toward high precision position control using laser interferometry: main sources of errors - Dr Sébastien Ducourtieux (LNE)  
10:20 AM --- Coffee Break ---
10:50 AM
SIMULATION (until 12:10 PM)
10:50 AM THOAMA01: Optimizing the PETRA IV girder by using bio-inspired structures - Simone Andresen (Alfred-Wegener-Institut Department of Bionic Lightweight Design)  
11:10 AM THOAMA02: LCLS NEH floor thermal deformation and mitigation plan - Lin Zhang (SLAC National Accelerator Laboratory LCLS Department)  
11:30 AM THOAMA03: Mechanical Design And Simulation For SPIRAL2 Project at GANIL - Cécile Barthe-Dejean (Grand Accélérateur Nat. d'Ions Lourds)  
11:50 AM THOAMA04: Design and FEA of an Innovative Rotating Sic Filter for High-Energy X-Ray Beam - Walter Tizzano (Diamond Light Source Ltd)  
9:00 AM
BEAMLINES (until 10:20 AM)
9:00 AM FROAMA06: High Resolution Monochromator for IXS Experiments at Petra III Beamline P01 - Frank-Uwe Dill (Deutsches Elektronen-Synchrotron)  
9:20 AM FROAMA02: A High Heat Load Double Crystal Monochromator and Its Cryo Cooling System for HEPS - Hao Liang (Chinese Academy of Sciences Institute of High Energy Physics Beijing Synchrotron Radiation Laboratory)  
9:40 AM FROAMA03: R&D of Mirror Bending techniques in BSRF - Ming Li (Chinese Academy of Sciences Institute of High Energy Physics Beijing Synchrotron Radiation Laboratory)  
10:00 AM FROAMA04: European XFEL SASE3 Photon Beam Commissioning and Lesson Learned - Daniele La Civita ( European XFEL GmbH)  
10:20 AM --- Coffee Break ---
10:50 AM
BEAMLINES (until 12:10 PM)
10:50 AM FROAMA05: Design and Commissioning Performance of the Two Soft X-ray Beamlines in NEXT, ESM and SIX - Yi Zhu (Brookhaven National Laboratory National Synchrotron Light Source II)  
11:10 AM FROAMA01: Mechanical Engineering Instrument Design and Development for LCLS-II - Lin Zhang (SLAC National Accelerator Laboratory LCLS Department)  
11:30 AM FROAMA07: ESRF Double Crystal Monochromator Prototype Project - Robert Baker (European Synchrotron Radiation Facility)  
11:50 AM FROAMA08: Refinements of SPring-8 Standard Monochromators with Cryogenically Cooled Silicon Crystals toward 50 nrad-Stability - Hiroshi Yamazaki (Japan Synchrotron Radiation Research Institute)  
PM
12:30 PM --- Lunch at SOLEL ---
2:45 PM --- Bus departure from SOLEIL to Venue ---
4:00 PM --- Registration ---
4:00 PM --- Social event - Welcome Reception ---
12:10 PM --- Lunch ---
1:30 PM
ACCELERATORS (until 2:50 PM)
1:30 PM TUOPMA01: Status of the European XFEL Photon Beam Systems - Dommach Martin (European XFEL GmbH)  
1:50 PM TUOPMA02: Mechanical Engineering for SCLF Accelerator - Lixin Yin (Shanghai Institute of Applied Physics)  
2:10 PM TUOPMA03: Development of new UE38 Undulator for Athos Beamline in SwissFEL - Haimo Joehri (Paul Scherrer Institut)  
2:30 PM TUOPMA04: MECHANICAL SYSTEM OF APPLE II INSERTION DEVICES AT MAXIV - Andreas Thiel (MAX IV Laboratory Lund University)  
2:50 PM --- Tea Break ---
3:20 PM
ACCELERATORS (until 4:40 PM)
3:20 PM TUOPMA05: Updates on the Storage Ring Vacuum System for Spring-8-Ii - Sunao Takahashi (Japan Synchrotron Radiation Research Institute)  
3:40 PM TUOPMA06: Status of the ESRF EBS Storage Ring Engineering and Construction - Philippe Marion (European Synchrotron Radiation Facility)  
4:00 PM TUOPMA07: Rf Fingers for the New Esrf-Ebs Storage Ring - Thierry Brochard (European Synchrotron Radiation Facility)  
4:20 PM TUOPMA08: Deformable RF Fingers with Axial Extension - Sushil Sharma (Brookhaven National Laboratory National Synchrotron Light Source II)  
4:40 PM
POSTER SESSION (until 6:00 PM)
12:10 PM --- Lunch ---
1:30 PM
PRECISION MECHANICS (until 2:10 PM)
1:30 PM WEOAMA05: FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors - Steven Patrick Kearney (Argonne National Laboratory Advanced Photon Source)  
1:50 PM WEOAMA06: Concepts and Instrumentation for Scanning free X-ray Emmission Spectroscopy - Daniel Grötzsch (Technische Universität Berlin Institut für Optik und Atomare Physik)  
2:10 PM
CORE TECHNOLOGY DEVELOPMENTS (until 2:50 PM)
2:10 PM WEOPMA07: Development of a New Sub-4k ARPES Endstation at PSI - Daniel Trutmann (Paul Scherrer Institute Mechanical Engineering Sciences)  
2:30 PM WEOPMA02: Non-contact luminescence lifetime cryothermometry for application in vacuum environment - Vitaliy Mykhaylyk (Diamond Light Source Ltd)  
2:50 PM --- Tea Break ---
3:20 PM
CORE TECHNOLOGY DEVELOPMENTS (until 4:40 PM)
3:20 PM WEOPMA03: Application of Additive Manufacturing in the Development of a Sample Holder for a Fixed Target Vector Scanning Diffractometer at SwissFEL - Xinyu Wang (Paul Scherrer Institute Mechanical Engineering Sciences)  
3:40 PM WEOPMA04: Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator - Deming Shu (Argonne National Laboratory Advanced Photon Source)  
4:00 PM WEOPMA05: Application of Industry Recognised Development Tools and Methodologies, such as Design for Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions in Synchrotron - Sarah Ann Macdonell (Diamond Light Source Ltd)  
4:20 PM WEOPMA06: A compact and calibratable von Hamos X-Ray Spectrometer based on two full-cylinder HAPG mosaic crystals for high-resolution XES - Ina Holfelder (Physikalisch Technische Bundesanstalt Institut Berlin)  
4:40 PM
POSTER SESSION (until 6:00 PM)
12:10 PM --- Lunch ---
1:30 PM
SIMULATION (until 2:10 PM)
1:30 PM THOAMA05: 3D Numerical Ray Tracing for the APS-Upgrade Storage Ring Vacuum System Design - Jason Carter (Argonne National Laboratory Advanced Photon Source)  
1:50 PM THOAMA06: A new X-ray beam for the ESRF beamlines, opto-mechanical global survey - Yves Dabin (European Synchrotron Radiation Facility)  
2:10 PM
BEAMLINES (until 2:50 PM)
2:10 PM THOPMA01: Piezo technology in Synchrotrons - BORIS LALUC (CEDRAT TECHNOLOGIES)  
2:30 PM THOPMA02: APS Upgrade - Beamline Engineering Overview - Oliver Schmidt (Argonne National Laboratory Advanced Photon Source)  
2:50 PM --- Tea Break ---
3:20 PM
BEAMLINES (until 4:40 PM)
3:20 PM THOPMA03: PtyNAMi: Ptychographic Nano-Analytical Microscope at PETRA III -How to achieve sub-nanometer sample stability - Ralph Doehrmann (Deutsches Elektronen-Synchrotron)  
3:40 PM THOPMA04: A New Procurement Strategy to Challenge the Supplier Constraints Created When Using a Fully Developed Reference Design - George Edward Howell (DLS, Oxfordshire)  
4:00 PM THOPMA05: Using Resistive Element Adjustable Length (REAL) Cooling to Increase Optical Design Flexibility in High Power XFELS - Corey Lee Hardin (SLAC National Accelerator Laboratory LCLS Department)  
4:20 PM THOPMA06: Development of Low Vibration Cooling Systems for Beamline Optics Using Heat Pipe Technology - James R. Nasiatka (Lawrence Berkeley National Laboratory)  
4:40 PM
POSTER SESSION (until 6:00 PM)
7:00 PM --- Social event - Conference dinner ---
12:10 PM --- Farewell and Lunch box ---