FCC-ee tuning WG meeting

→ Europe/Zurich
Zoom Meeting ID
62402068961
Host
Rogelio Tomas Garcia
Useful links
Join via phone
Zoom URL

 

###############

Pantaleo, 

Goal to optmize lattice design in terms performance, power consumption and number of elements.

The 90/90 FODO cell is only a first order achromat. Sextupoles generate 2nd order chroma. Chinese scheme with 8SF controls better 2nd order. The length aberration of the sextupoles breaks the -I transformation. Scaling with the number of FODO cells is presented. Increasing number of cells reduces energy acceptance (length of ring does not matter).

A 6 bend achromat is used to explore if cell can be improved wrt 90 degrees FODO cell. HMBA is achromatic up to 3rd order.

In the 90 deg cell the second order chroma is generated in the quadrupoles without sextupoles. Can this effect be reduced?

One parameter to optimize is the phase advance between SD and SF pairs. Increasing it improves second order chroma. Adding quads in between the SF pair allows to reduce chroma generated in the quads wihtout sextupoles. DA and energy acceptance improve. A cell is found, v11a1, that has very good properties, with weaker sextupoles by 20% and control of second order chroma. Energy acceptance of even 10%. This is a complete second order achromatic and anhanrmoic cell (maybe first time ever?). The compatibility with current lattice has been kept. Further improvements reduce emittance by 5% and chromaticity by 5% too. This cell is named Hybrid FODO Cell as starts from 5 90 deg but evolves towards a multibend achromat.  Quadrupoles are placed at same locations as for the baseline lattice but changing some polarities. Gradients are similar.

A straight section is optimized by imposing constraints at the center (integer phase advance, dWx/d(delta)=dWy/d(delta)=d^2px/ddelta^2=0) and having mirror symetry. Straight sections are designed for the FCCee case.

To match dispersion rather than using the missing dipole scheme a half bending angle scheme is used. End of DS is at -I wrt last arc SF.

A full lattice is generated without FFS but with long straight sections with excellent chromatic properties.  Sextupoles are about 5% stronger than arcs alone.

Two volunteers would be needed to optimize arc lattice. DA is in excess of 100sigmax and 50sigmay. The amplitude detuning is optimize by putting contrains on matrix elements. 

 

The FFS is being designed by Pantaleo aiming to be a complete achromat in both planes (in the present FCCee only vertical chroma is corrected locally).  This was successfully done in SuperB. The crab sextupoles were outside the FFs. Starting FFs is the NLC design. Lots of care is needed in the matching between the H chroma and V chroma correction systems. The FFS is studied from the IP also for off-energy particles with large aberrations at the end. This means that for the crab sextupoles to work both H and V chromas should be corrected. After chroma correction bandwidth increases to about 1%. High order aberrations in the alpha functions is observed. Betas at crab sexts are still off. The reason is that betas at sexts for off-energy particles are not nominal, so chromaticity is not corrected as they should (W functions are not well corrected by sextupoles for off energy particles). 

Adding sextupole at first image of the IP, that has dispersion, will help correct betas for off energy particles. Betas at the crab sextupoles are restored! 

These new sextupoles do nothing for on-momentum particles. Bandwidth is increased above 3%. To insert this FFS in the arc matching must be done also for the chromatic functions. The same transparency criteria as for the previous insertion region should be respected, which are the same as for the crab sextupoles. A DS should be designed. Ring is fully modular. FFS can be added or removed without affecting optics / chromatic properties.

MA is larger than 2.5%. The ring is completely anharmonic.

Final matching of layout is also performed to match FCCee layout. Further matching of chromatic functions is done to make them all periodic.

 

Oide-san asks about the Z machine. Pantaleo answers that at the moment this is not yet checked. At low energy synchrotron radiation in the final quadrupoles should be checked carefully. 

Rogelio asks if it will be a concern to reduce the dipole strength one IP side (to alleviate SR in the detector as done in the current design). Pantaleo replies that he is doing one step at a time. This will require further work.  

 

 

 

###############

Esmaeil, 

Inserting b3 in MADX and Elegant gives same results generating about 10 units of chroma for b3=-2e-4 at 10mm.

Adding b3 in dipoles reduces DA and MA. Specially adding b3 to all dipoles has larger impact on DA than adding only to arc dipoles.

Correcting the chromaticity does not restore the DA.

 

b3 of 10e-4 in quads improves DA, surprisingly.

 

Rogelio concludes that the arc b3 error of 2 units is OK, however the DA reduction comes mostly from IR dipoles, that should need tighter FQ specifications.

Esmaeil will study cases with lower b3 in the IR dipoles to define a specification. Studies for the Z should also be performed.

 

#################

Katsunobu Oide

The b3 study is reviewed, adding b3 only in the arc dipoles. The IR dipoles would need better field quality. Oide-san obtains similar chromaticity change as Esmaeil. Chromaticity correction mostly restores DA and MA, loosing a bit of DA in x. The chromaticity correction is done putting 6 constraints (IP chromatic functions and Q'x,y). Probably this effect is more relevant for the Z.

 

 

 

 

 

 

 

There are minutes attached to this event. Show them.