FCC-ee tuning WG meeting

→ Europe/Zurich
Zoom Meeting ID
62185412873
Host
Rogelio Tomas Garcia
Useful links
Join via phone
Zoom URL

Progress with optics developments for FCC-ee, Pantaleo

 

From Michael: The old version of Pantaleo's HFD lattice (i.e without what is presented today) is already available in the repo: https://gitlab.cern.ch/acc-models/fcc/fcc-ee-lattice/-/tree/V22_HFD .

 

One of the goals of these developments is to improve the alignment tolerances.

A weak gradient has been added to all dipoles to decrease emittance without affect momentum compaction factor.

Oide comments that reducing longitudinal damping factor is not favorable for polarization. Probably other improvements could

compensate this loss in polarization.

Doglegs have been added and LSS have been lengthened. Oide asks if there are quadrupoles in the crossing area. This is to introduce

a method to generate any kind of layout that meets the requirements, physical quadrupole dimensions and locations to be checked later.

Second order dispersion from dipoles is corrected via 4 SF paired sextupoles. Chromaticity and detuning are canceled with the proposed scheme.

 

The FFS bending angles can be reduced significantly without introducing significant aberrations (mostly 6th order). However vertical DA reduces linearly with bending angle. FFS accepts many manipulations, like opposing sign of bending angles. 

 

Closed machine with weak FFS dipoles still shows good phase space and hence DA.  For opposite signs of bending angles between left and right of FFS introduces new cancellations of aberrations. However this does not work to close the machine. Additional angle can be introduced in the downstream FFS side. Last ARC cells are also used to recover layout. These cause second order dispersion that is not good for MA and FFS becomes long. Specially longer than current design as H chromaticity correction is included in this FFS but not in the nominal.

 

Re-starting from the FFS with same bending sign left and right (this serves as an extra arc cell in terms of bending). DA and MA are very good. Max. distance between 2 beams is 5m. This version does not feature 30mrad crossing but 26mrad, to be fixed. Incoming FFS side has weaker dipoles, so dispersion is lower and sextupoles have to be stronger. Second order dispersion is not well matched.

 

Plan is that Michael Hofer will produce the layout files for this machine.

 

As a goal the same lattice should work well for all energies.

ttbar quads are 60% in number and 60% weaker compared to current FODO. This lattice does not need modulating the arc sextupoles to improve DA.

Rogelio comments that the H and V FFS chromaticity sextupoles and crab sextupole are stronger and tighter alignment tolerances should be expected. Pantaleo confirms, without being worried for the H sextupoles as they are 10% of the vertical ones. This is to be studied.

Oide-san comments that still in this design the SR at the IP is larger than for current design. Pantaleo agrees and this has to be optimized. CEPC also has stronger dipoles close to IP, however they stop at Higgs.

Oide-san asks about design tune that should be below half integer. Pantaleo replies that tune can be freely chosen.

 

ARC sextupole alignment tolerance is expected to relax by factor 10 in this lattice!

Pantaleo suggests that BPMs and orbit correctors are placed only at location of sextupoles in the arc.

Trimming coils could be added to sextupoles. Beta-beating correction could be achieved by changing reference orbit at sextupole, via feeddown.

This reduces amount of quad trims.

 

Manuela suggests to start tracking with BDSIM to see the effect of SR in the IRs. Pantaleo indeed suggests that there could be mitigations of SR

and optimum to be found. Therefore further work is needed before tracking this lattice for SR in the IR.

Oide-san requests to adapt emittance, tune, beta*, etc. to CDR values as these had a thorough optimization. Pantaleo is looking for a new set of

machine parameters that produces same performance with more relaxed optics.

 

Field quality tolerances, Esmaeil

 

Z lattice has 22sigma x 176 sigmay DA. 

With b3=-2e-4 in arc dipoles chromaticity changes by +- 70 units. 

Applying this error to all IR and arc dipoles destroys DA and chromaticity correction does not restore it (effect comes from IR dipoles).

Considering only arc dipoles effect is negligible.

Decreasing b3 to -5e-5 the impact on DA is significantly weaker. Appropriate tolerance seems to be at 1e-5.  

Quadrupoles: b3=5e-4 in IR quadrupoles destroys DA. Again a tolerance of 1e-5 seems appropriate for IR quads. 

Z lattice is significantly more sensitive to FQ errors than tt lattice.

 

Oide and Pantaleo comment that b3= 1e-5 could still be doable with stand-alone magnets, plus magnets next to sextupoles are easily correctable.

Therefore quadrupole tolerances should be studied one-by-one, including octupolar tolerances, b4.

 

 

 

Concerning tt lattice results are recalled from last presentation. For tt tolerance for IR dipoles seems to be between 5e-5 and 1e-4. 

 

 

 

 

 

There are minutes attached to this event. Show them.