A&T Seminar

Study of nuclear fuel element materials by advanced techniques

by Claude Degueldre (Laboratory for Nuclear Materials, Nuclear Energy and Safety Dept., Paul Scherrer Institut)

→ Europe/Zurich
30/7-018 - Kjell Johnsen Auditorium (CERN)

30/7-018 - Kjell Johnsen Auditorium

CERN

190
Show room on map
Description
Nuclear fuel elements are constituted of the fuel material itself and both cladding and structural setup materials composed of Zircaloy (Zry). During their use in nuclear reactors these materials under neutron and/or fission product irradiation undergo defect formation as well as phase segregation such as bubble formation or precipitations. These processes could modify the properties of the materials during extension of their use in reactor.  These materials are investigated at the Laboratory for Nuclear Materials (LNM) by combining techniques such as micro x-ray fluorescence (µXRF), micro x-ray diffraction (µXRD) and micro x-ray absorption spectroscopy (µXAS) from the corrosion product deposit layer through the bulk metal layers. Scanning Transmission X-ray Microspectroscopy (STXM) has been used to characterise secondary phases precipitates (SPP’s) in Zry and muon Spin Relaxation (muSR) was applied to characterise defects in Zry metal. For the fuel materials, small angle neutron scattering (SANS) has been used in the case of specific simulated fuels (i.e. Inert Matrix Fuel). This presentation shows how versatile the combination of these techniques is to investigate local structures at the atomic level and the occurrence of defects or pores. Examples will be given, starting with corrosion product deposits on the cladding, progressing through the cladding material itself and ending within the fuel material. The effect of irradiation (or its simulation) on the materials shall be described based on the specific investigations. The behavior of PWR and BWR cladding material was assessed by feeling defects in Zircaloy by extended X-ray absorption fine structure (XAFS) and muSR analyses using muons as probes. Fuel analyses in their solid solutions (homogeneous) and later in heterogeneous phases are being investigated for MOX samples e.g. combining µXRD and µXAFS. First results will be presented. In these studies, XAS is used throughout in a 1D, 2D or even 3D mode. Such investigations are crucial to progress in the understanding of the processes occurring in the materials used in Generations II & III reactors.
Slides
Organised by

W. Herr (BE), S. Sgobba (EN), G. deRijk (TE)