FCC-ee optics tuning WG meeting, towards the midterm report

→ Europe/Zurich
Zoom Meeting ID
65551158276
Host
Rogelio Tomas Garcia
Useful links
Join via phone
Zoom URL

X. Huang presents first applications of PBBA on the FCC-ee lattice. BPMs and orbit correctors are added at the beginning of each quadrupole. Misalignments are added only to arc quadrupoles and the orbit is corrected. PBBA is performed using 18 QF2 (every 5th element) in the first arc. After 2 iterations for each instance (20 in total) with 1 µm BPM error and 177 correctors the systematic error is 10 and 40 µm between target and measured errors. The statistical error is a few µm which stems mainly from the BPM resolution. Using 8 QF2 distributed all over the lattice, and 72 correctors, gives a systematic error between 10 to 30 µm. Since the magnets are 2.9 m long X. Huang stresses that an initial angle will spoil the accuracy of PBBA, and that, nevertheless, PBBA by design can correct the initial angle if it is given the required knobs and if the algorithm converges. S. Liuzzo comments that the zick-zack pattern in reconstructing the quadrupole offset could come for the alternating sign of the quadrupoles.  Furthermore, he highlights, that X.Huang could correct using AT alignment errors for quadrupoles and sextupoles in the arcs up to 200um (instead of 10um in his simulations) for V22z.


E. Musa presents updates on using LOCO for the FCC-ee for FODO and HFD Z-lattices, with the focus of applying various magnitudes of misalignments to arc quadrupoles and sextupoles. In here presented studies no BPM errors and no girder errors are included. No LOCO is applied for HFD lattice yet and only up to 50 µm are applied, whereby studies are currently ongoing. S. Liuzzo comments that the absolute numbers of final beta-beating, dispersion and emittance appear similar as for his studies. Furthermore, he comments that 6664 BPMs seems a lot and could stem from the lattice design carried out in MAD-8 for HFD, which requires element splitting. Moreover, concerning E. Musa's mentioned challenges of retrieving the emittance calculation for HDF lattice, S. Liuzzo suggests checking the RF-cavities. 


S. Jagabathuni presents effects of coherent sine-wave misalignments on the optics of one arc. He point out, that since arc quadrupoles and sextupoles are placed on the same girder they should be misaligned in the same manner. No orbit or optics corrections are applied. An amplitude of 0.02 mm and various wave lengths are simulated and the beta-beating and dispersion error at the arc quadrupoles is taken as figures of merit. With an about factor 2 larger amplitude of 0.05 mm the optics error increases by the same amount. Peaks occur frequently at 21.9, 83.4, 138.9 and 408.7 m wave lengths for the Z-lattice, and at 41.7, 69.5, and 210.4 for the ttbar lattice. For the Z-lattice numerous peaks are observed until 400 m, while for the latter, only wavelengths until 200 m are found to be relevant, which is explained by a factor 2 lower FODO cell length. For large wave lengths the orbit response is identical to the applied errors. S. Liuzzo comments that using only wavelengths which fulfill arclength/n could be used for improved simulations. Furthermore, he suggests to consider also a sine wave when correcting the lattice. Furthermore, S. Liuzzo remarks that it could be easier for collaboration between the alignment and the optics teams, if the alignment team could provide the expected pattern, which is then simulated by the optics team.

There are minutes attached to this event. Show them.