GCS R&D
LAB256
- [ ] R-32 results to be presented
- [ ] Check RPC24
- [ ] Other HFCs to be tested?
904
- [ ] Check with Uzay for HF and F2 cells installation
- [ ] Review 10% CF4 long run data
- [ ] Fit
- [ ] Presentation of the results
- [ ] Possible improvements
- [ ] Continue 10%
GIF++
- [ ] Understand mixer changes during aging tests
- [ ] To put Mixer as it was before May
- [ ] GC tests in the elog
- [ ] To be added with timestamps
- [ ] Check for script analyzing chromatograms
- [ ] Data analysis and cleaning
- [ ] Find all the HV scans that have wrong configs: for instance, muon beam instead of cosmic muons
- [ ] Tags for test beam
- [ ] Script to update config in the db
- [x] Remove alignment runs from /eos
- [ ] Remove run folders that are merged
- [ ] Mark runs where efficiency is not reaching plateau
- [ ] Check if there are runs in /eos that are not analyzed in the DB
- [x] Check if there are runs with date mismatching from folder_path date
- [x] Plots to be prepared for aging and test beam. For all the gas mixtures and RPCs
- [x] Resistivity vs time
- [x] Ohmic currents vs integrated charge for all
- [x] Physics currents vs integrated charge
- [x] Physics - Ohmic current vs integrated charge
- [x] Ohmic currents vs time
- [x] Physics currents vs time
- [x] Physics - Ohmic vs time
- [x] Muon beam efficiencies for same gas mixture at different test beam (legend to report the integrated charge)
- [x] Currents vs rate for the same gas mixture and different test beams (legend to report the integrated charge)
- [x] Currents vs voltage for the source off scans (legend to report integrated charge)
- [ ] Notebook that produces all the plots and stores webpage in https://ghg-studies-eos.web.cern.ch/ghg-studies-eos/ + elog
- [ ] Global check of GIF++ setup
- [ ] Gas lines
- [ ] Sampling points
- [ ] Leak search
- [ ] P&ID
- [ ] Cabling campaign: in November
- [ ] Resume daily GIF++ checklist
- [ ] To review the checklist for improvements
- [ ] Bakelite from GT
- [ ] Check status
- [ ] Check sizes of RPCs
- [ ] Reorganize folders in rpcgif SWAN
Software
- [ ] Organize the required work for a possible rewrite of the backend of olefin
- [ ] Understand how to organize gitlab
- [ ] Organize the storage of the data in a new dataframe
- [ ] For muon signals
- [ ] For gamma signals
- [ ] Signal level calculations
- [ ] Simple: simple baseline, time, charge of a peak
- [ ] To study: advanced baseline calculation
- [ ] After pulses count
- [ ] Avalanche and streamer charge integration and separation
- [ ] Try to calculate charge of each gamma signal
- [ ] Aggregating statistics calculations
- [ ] calculate features only from central strips
- [ ] Gamma cluster rate calculations
There are minutes attached to this event.
Show them.