CRU meeting
Present: Erno, Tivadar, Julien, Olivier.
* Focal requirements
* Epad will use either PCie40 or Felix.
* CRU dual PCIe endpoint can cope with a maximum of 11GB/s=> 88Gb/s. Focal has to be aware of that when counting the number of CRU needed. Also, the FLP will then had some further limitation (depending on the number of CRU/FLP)
* trigger discussion to find solution are on going on both sides and then a common meeting to find the solution, and invite CTP to part in this discussion
* firmware update
* lpGBT wrapper simulation working with ASIC model in fixed FEC12 and 10G (up and downstream).
* Simulation written with Vunit function, not woriking yet with CI because lpGBT ASIC model is in verilog
* Currently adding dynamic speed switching
* No need for dynamic encoding selection (noone require FEC5)
* future plan :
* add IC control, the GBT_SC core ine the cru-fw repo has to be updated to support lpGBT (with generic)
* test on real hardware
* When possible move to lpGBT VHDL model (from Julien's work) for the datapath part.
* Next meeting we have to set a regular meeting date and time (next meeting Oct 01 at 9h30)