Choose timezone
Your profile timezone:
BOND design status
→
Europe/Zurich
927/1-B23 (CERN)
BOND design status
Zoom Meeting ID
64760971754
Host
Jose Ferradas Troitino
Alternative host
Jose Luis Rudeiros Fernandez
Useful links
Join via phone
Zoom URL
Update from CAD design (N. Peray & Dimitrios):
- Nico prepared a summary on the different handling operations for coil and magnet assembly
- Up to impregnation step, all handling tooling is already designed and ready
- There are no lifting threaded holes in the pole, they were initially foreseen but then removed after the decision of splitting the pole in inner and upper layer.
- For the thinnest part in the pole (4 mm) it is very hard to guarantee that we have at least threaded two times the screw diameter
- Slide 2: The first row can be removed by turning the impregnation mold and opening already the mold with the coil aperture upside
- Important to lift the coil in both positions with the aperture upside and downside
- Action: Nico will try to simplify the lifting beam and make it compatible with the different configurations.
- Dimitrios prepared a summary on the end plate loading sequence:
- Proposal is to remove the complex system for centering the plate and just consider a lifting table plus some mechanical jacks
Update from endplate design (J. Ferradas):
- Proposal is to keep the 150 mm thick
Update from dummy components (V. Roxenborg):
- Quotation to be updated with the material for rods (50mm)
There are minutes attached to this event.
Show them.