Choose timezone
Your profile timezone:
Final cooling solenoid - progress meeting
→
Europe/Zurich
376/1-020 (CERN)
FInal cooling solenoid - progress meeting
Zoom Meeting ID
63807523337
Host
Carlotta Accettura
Alternative host
Raphael Unterrainer
Useful links
Join via phone
Zoom URL
Meeting Details
- Date & Time: 2026-03-13, 14:00
- Location: 376/1-020
- Indico: https://indico.cern.ch/event/1631055/
- In Attendance: @Agnieszka Chmielinska, @Alessio Simoni, @Arjan Verweij, @Audrey Jade Ventura,@Bernardo Bordini, @Frantisek Sanda, @Jorge Guardia Valenzuela, @Konstantin Weindel, @Oscar Sacristan De Frutos, @Raphael Unterrainer
Agenda Items and Notes
1. Progress on the 4.2 K measurement setup - Joints, Current Injection and Containment
- Technical drawing to be finished. (@Frantisek Sanda)
- For 10T setup and setup for Tim, components for 6 double pancakes (to be confirmed) should be produced. Full production expected to be completed by end of April, first pieces expected early April for single-pancake tests. (@Frantisek Sanda, @Jorge Guardia Valenzuela, @Raphael Unterrainer)
- Single-pancake tests are conducted as soon as the first components have been manufactured, to adjust production if necessary. (@Raphael Unterrainer)
2. Progress on the 77 K measurements - Status of new setup, Status of new DAQ Software
- Florian Girardot (163) will produce injection copper blocks.
- Setup assembly to be finished and tested. (@Alessio Simoni, @Konstantin Weindel, @Raphael Unterrainer)
- Bring first version of new DAQ software for 77K and future 4.2K measurements to production stage. (@Konstantin Weindel)
3. Current status on precompression tests
- Measurements and simulation results do not match. Further investigation of issues needed.
- Dedicated mechanics meeting to be scheduled. (@Audrey Jade Ventura, @Bernardo Bordini, @Frantisek Sanda, @Jorge Guardia Valenzuela, @Oscar Sacristan De Frutos)
- Produce (low-grade) coil (110 mm outer diameter) for precompression test. (@Alessio Simoni, @Konstantin Weindel, @Oscar Sacristan De Frutos, @Raphael Unterrainer)
- Precompression test with dummy coil and intermediate disk to be performed before Easter. (@Oscar Sacristan De Frutos)
4. Shrink fitting setup design status
- Discussion to be scheduled. (@Raphael Unterrainer, @Frantisek Sanda, @Bernardo Bordini)
Other
- Permissions for sharing of CERNBox folder to be checked. Contact Service Desk. (@Bernardo Bordini, @Raphael Unterrainer)
Next Meeting
- Date & Time: 2026-03-27, 14:00
- Location: 376/1-020
- Indico: https://indico.cern.ch/event/1631057/
There are minutes attached to this event.
Show them.