Name: ICEC/ICMC 2014 Conference
Start: 2014-07-07T09:15:00+02:00
End: 2014-07-11T19:30:00+02:00
Location: No location set

ICEC/ICMC 2014 Conference

from Monday, July 7, 2014 (9:15 AM) to Friday, July 11, 2014 (7:30 PM)

Monday, July 7, 2014

10:00 AM Registration starts on Monday morning at 10:00, ends at 17:00 in the conference center
Registration starts on Monday morning at 10:00, ends at 17:00 in the conference center
10:00 AM - 11:00 AM
Room: Registration desk
11:00 AM
11:00 AM - 5:00 PM
Contributions

11:00 AM Course 1: Cryo-Coolers - Fons De Waele (Eindhoven University of Technology)

11:01 AM Course 2: Cryostat Design - John Weisand (European Spallation Source)

11:02 AM Course 3: Superconducting Materials for Power Applications - Pascal Tixador (CNRS - Grenoble)
Registration desk open
Registration desk open
11:00 AM - 5:00 PM
Room: Registration desk

5:00 PM Break
Break
5:00 PM - 6:00 PM

6:00 PM Registration Open during Welcome Reception
Registration Open during Welcome Reception
6:00 PM - 9:00 PM
Room: Registration Desk

Welcome Reception and Continued Registration (free drinks and a buffet-type meal will be served)
Welcome Reception and Continued Registration (free drinks and a buffet-type meal will be served)
6:00 PM - 9:00 PM

9:00 PM Shuttle service to hotels
Shuttle service to hotels
9:00 PM - 9:30 PM
Tuesday, July 8, 2014

8:00 AM Registration desk open
Registration desk open
8:00 AM - 8:45 AM
Room: Entry hall
8:45 AM Opening of the Conference, Introduction to the Day and 2 Plenary Orals
Opening of the Conference, Introduction to the Day and 2 Plenary Orals
8:45 AM - 10:35 AM
Room: WA1
Contributions

8:45 AM Opening of the Conference

9:00 AM SPACE CRYOCOOLER DEVELOPMENTS - Lionel DUBAND (C)

9:45 AM Study on Introduction of CO2 Free Energy to Japan with Liquid Hydrogen - Shoji KAMIYA (Kawasaki Heavy Industries, Ltd.)

10:30 AM Gustav and Ingrid Klipping Award ceremony
10:35 AM Coffee Break
Coffee Break
10:35 AM - 11:00 AM
Room: Exhibition and Posters Area
11:00 AM Magnet Design and Quench Protection
Magnet Design and Quench Protection
11:00 AM - 1:00 PM
Room: WA1
Contributions

11:00 AM [Invited Oral] Design Options of the Superconducting Detector Magnets for a very large 100 TeV Hadron Collider - Herman Ten Kate (CERN)

11:30 AM Reduction of screening current-induced magnetic field for REBCO coils by the use of multi-filamentary conductors - Yi XU (RIKEN,Yokohama,Japan;Chiba University,Chiba,Japan)

11:45 AM Construction and test of a non-insulated insert coil using coated conductor tape - Davide Uglietti (EPFL)

12:00 PM Quench detection and protection for high-temperature superconducting magnets: lessons from Bi-2212 - Tengming Shen (Fermilab)

12:15 PM Study of quench behaviors of REBCO impregnated pancake coil with 75-um-thick copper stabilizer under conduction-cooled condition - Masanori Daibo (F)

12:30 PM The Roebel Assembled Coated Conductor (RACC) cable, status of performance and prospects for further upgrades - Wilfried Goldacker (Institute for Technical Physics, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany)

12:45 PM Self-healing effect from thermal runaway for uninsulated REBCO coils - Kyoko Yanagisawa (RIKEN,Chiba Uneversity)
Joule-Thomson cryocoolers
Joule-Thomson cryocoolers
11:00 AM - 1:00 PM
Room: WA2
Contributions

11:00 AM [Invited Oral] Separator of 3He isotope from liquid 4He - Jaroslaw POLINSKI (PWR)

11:30 AM Study on a miniature mixed-gases Joule-Thomson cooler driven by an oil-lubricated mini-compressor for 120 K temperature ranges - Maoqiong Gong (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

11:45 AM Vibration-free cooler for the METIS instrument using sorption compressors - Yingzhe Wu (University of Twente)

12:00 PM Performance Analysis of Joule-Thomson Cooler Supplied with Gas Mixtures - Agnieszka Piotrowska (Wroclaw University of Technology)

12:15 PM Sensitivity of micromachined Joule-Thomson coolers to clogging due to moisture - Haishan Cao (University of Twente)

12:30 PM Demonstration of active magnetic regenerative refrigeration with pump-less system - Akiko Saito (Toshiba corporation)

12:45 PM Miniature Piezoelectric Compressor for Joule-Thomson Cryocoolers - Sergey Riabzev (Ricor)
High Performance RE123 Tapes and Nb3Sn Wires
High Performance RE123 Tapes and Nb3Sn Wires
11:00 AM - 1:00 PM
Room: WA4
Contributions

11:00 AM [Invited Oral] Long-length YBCO coated conductors manufactured in medium size pilot production line based on pulsed laser deposition - Alexander Usoskin (Bruker HTS GmbH) Tim Bubelis (Bruker HTS GmbH)

11:30 AM Characterization of (Re)BCO conductor for development of 32T superconducting magnet - Dmytro Abraimov (NHMFL)

11:45 AM Enhancement of In-field Jc in GdBa2Cu3O7-$\delta$ Coated Conductor by Using Highly Oriented IBAD Substrate - Masayoshi Inoue (Kyushu University)

12:00 PM Transverse, axial and torsional strain tests on ReBCO tapes - Chao Zhou (University of Twente, Faculty of Science & Technology, 7522 NB Enschede, The Netherlands)

12:15 PM Options for epoxy impregnation of REBCO Roebel cables - Anna Kario (KIT)

12:30 PM Developing Nb3Sn and Bi-2212 conductor s for high field magnet applications - Michael Gerace (OST)

12:45 PM Influence of indentations on the critical current of Nb3Sn strands - Tomone Suwa (Japan Atomic Enrgy Agency)
1:00 PM Lunch Break (a lunch buffet will be served for all registrants)
Lunch Break (a lunch buffet will be served for all registrants)
1:00 PM - 2:15 PM
Room: Lunch Area
2:15 PM Large Scale Cryogenics I
Large Scale Cryogenics I
2:15 PM - 4:00 PM
Contributions

2:15 PM Cooling network design of the ITER thermal shield considering its flow distribution and thermal load - Kwanwoo Nam (ITER Korea, NFRI)

2:15 PM Design of the Helium Purifier for IHEP-ADS Helium Purification System - Jianqin Zhang (IHEP,CAS)

2:15 PM Enhancement of cryogenic distillation by the presence of a gradient magnetic field - Shiran Bao (Institute of Refrigeration and Cryogenics, Zhejiang University, Hangzhou, 310027, P. R. China)

2:15 PM Development of a divisible pressure-resistant accumulator for the cryogenic hydrogen system at J-PARC - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

2:15 PM Simulations for a Novel Single-Column Cryogenic Air Separation Process Using LNG Cold Energy - Yanzhong Li (Xi'an Jiaotong University)

2:15 PM Failure mechanism and consolidation of the compensation bellows of the LHC cryogenic distribution line - Laurent Jean Tavian (CERN)

2:15 PM Modeling and Dynamic Simulation of a Large Scale Helium Refrigerator - Xiujuan Xie (1Key Lab of Cryogenics, Technical nstitute of Physics and Chemistry Chinese Academny of Science)
Cryocoolers I
Cryocoolers I
2:15 PM - 4:00 PM
Contributions

2:15 PM Experimental Investigation of Cooling Capacity of 4K GM Cryocoolers in Magnetic Fields - Takaaki Morie (Sumitomo Heavy Industries, Ltd.)

2:15 PM Development of compact 2K GM cryocoolers - Mingyao Xu (Sumitomo Heavy Industries, Ltd.)

2:15 PM Performance study of hybrid space cryocoolers working at liquid helium temperature - Dongli Liu (Institute of Refrigeration and Cryogenics, Department of Energy Engineering, Zhejiang University)

2:15 PM CFD simulation and optimization of a 10K VM refrigerator - Junjie Wang (Key Laboratory of Cryogenics, TIPC, Chinese Academy of Sciences, Beijing 100190, China)

2:15 PM Theoretical Study on Standing Wave Thermoacoustic Engine - NAIK HEMANT (MECHANICAL ENGINEERING DEAPRTMENT, SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY, SURAT, GUJARAT, INDIA, 395007)

2:15 PM Study on Minor Losses around the Thermoacoustic Parallel Stack in the Oscillatory Flow Conditions - Xiujuan Xie (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

2:15 PM Development of High Capacity Split Stirling Cryocooler for HTS - Yumoto Kenta (Sumitomo Heavy Industries, Ltd.,)
Cryogenics for Power Applications, Other Applications, LNG and H2
Cryogenics for Power Applications, Other Applications, LNG and H2
2:15 PM - 4:00 PM
Contributions

2:15 PM Conceptual Design of the Cooling System for a Superconducting Wind Turbine Generator - Shuichiro Fuchino (National Institute of Industrial Science and Technology)

2:15 PM Radiant cooling of the rotator in a superconducting induction motor - Koichi Omachi (Graduate School of Engineering, Okayama University of Science)

2:15 PM Counterflow cooling tests of superconducting cables for railway systems - Masaru Tomita (Railway Technical Research Institute)

2:15 PM Study on Magnetic Field Distribution of Superconducting Magnets in Magnetic Separation - Laifeng Li (Technical Institute of Physics and Chemistry,CAS (P.R. China))

2:15 PM Integration challenges of an Air Separation Unit with a thermal power plant - Maciej Chorowski (Wroclaw University of Technology)

2:15 PM Advantages, design and manufacturing of vacuum insulated transfer lines for LNG - Sjoerd Van der Putte (Demaco Holland bv)

2:15 PM Thermal insulation test of newly designed cryogenic pipes for the superconducting DC power transmission system in Ishikari, Japan - Hirofumi Watanabe (Chubu University, R&D partnership for Ishikari Superconducting DC Power Transmission System (i-SPOT))

2:15 PM Developing progress of critical equipment in the CSNS cryogenic hydrogen system - Guoping Wang (Institute of High Energy Physics, CAS)

2:15 PM Commercial Electronic Components and Silicon-on-Sapphire ICs at Extreme Cryogenic Temperatures - Andrew Rys (Kansas State University)

2:15 PM Development and test of a cooling system for a 154 kV superconducting fault current limiter - Kim Heesun (Korea electric power corporation)

2:15 PM Optimum design of the outer shield layer in an innovative superconducting DC cable - Vladimir Vyatkin (Kyushu Institute of Technology)

2:15 PM Plate-Fin Heat-Exchangers for a 10 kW Brayton Cryocooler and a 1 km HTS Cable - Kyung Hyun Gwak (Hong Ik University)

2:15 PM Evaluation of a Two-Stage Mixed Refrigerant Cascade for HTS Cooling below 60 K - Thomas M. Kochenburger (Institute of Technical Thermodynamics and Refrigeration, Karlsruhe Institute of Technology, Germany)

2:15 PM A cooling system for practical HTS applications - Yasuharu Kamioka (ColdTech Associates)

2:15 PM Study of the thermo-syphon cooling system with a vessel in the sea states - Kota Yamaguchi (Tokyo University of Marine Science and Technology)
Instrumentation and Process Controls
Instrumentation and Process Controls
2:15 PM - 4:00 PM
Contributions

2:15 PM The ESS superconducting RF cavity and cryomodule cryogenic processes - Christine Darve (European Spallation Source)

2:15 PM Improvement of the operational settings of a helium purifier, leading to a higher purity of the recovered gas - Hiroshi Ikeda (University of Tsukuba)

2:15 PM Heat load estimator for smoothing pulsed heat loads on supercritical helium loops - Christine Hoa (CEA SBT)

2:15 PM Calibration of an HTS based LOX 400mm level sensor - Karunanithi Rangasamy (Indian Institute of Science)

2:15 PM Deep Cryogenic Low Power 24 bits Analog to Digital Converter with Active Reverse Cryostat Package - Marcos Turqueti (L)

2:15 PM An optimal control approach for an overall cryogenic plant under pulsed heat loads - Luis Gomez Palacin (CERN)

2:15 PM Corrections of reducing the uncertainty of the self-heating in cryogenic temperature measurements of the highest accuracy - Zhengyu Li (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)

2:15 PM Development of a Measurement and Control System for a 40L/h Helium Liquefier Based on the Siemens PLC S7-300 - Tao Yan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China)

2:15 PM Cryodiagnostics of SC-accelerators with fast cycling superferric magnets - Yury Filippov (J)

2:15 PM Fundamental study of a liquid hydrogen tank for transportation using MgB2 level sensor - Kazuma Maekawa (Kobe University)

2:15 PM Improved software production for the LHC tunnel cryogenics control system - Czeslaw Fluder (CERN)

2:15 PM Fiber Bragg grating sensors for a mass flow determination in a rotating liquid neon cooling channel - Thomas Richter (Karlsruhe Institute of Technology ( campus North))

2:15 PM Building a thinner gap in a Gas Gap Heat Switch - Isabel Catarino (CEFITEC, Departamento de Física, FCT - Universidade Nova de Lisboa, 2829-516 Caparica, Portugal)

2:15 PM Commissioning of temperatue sensors for the XFEL AMTF - Ruud Van der Woude (Demaco Holland bv)

2:15 PM Validation of a new method for flow measurement in cryogenic systems - Andreas Janzen (Karlsruher Institut of Technology - Institute of Technical Thermodynamics and Refrigeration (ITTK))
NbTi and Nb3Sn Superconductors and Stability
NbTi and Nb3Sn Superconductors and Stability
2:15 PM - 4:00 PM
Contributions

2:15 PM Deformation behaviour and critical temperature of NbTi superconductor processed by cold rolling with a pulsed current - Anna Frolova (Mechanical Engineering Research Institute of the Russian Academy of Sciences)

2:15 PM Properties of Nb3Al wires processed by Double Rapid Heating and Quenching - Kiyosumi Tsuchiya (K)

2:15 PM Status of AC loss verification tests on ITER conductors with transverse load cycling - Kostyantyn Yagotyntsev (University of Twente, Faculty of Science & Technology, 7522 NB Enschede, The Netherlands)

2:15 PM Analysis of the Nb3Sn strand microstructure after full-size «SULTAN» test of an ITER TF conductor sample - Liudmila Potanina (Russia Scientific R&D Cable Institute (JSC VNIIKP))

2:15 PM Transverse pressure dependence of the critical current in Nb3Sn Rutherford cables up to 200 MPa - Peng Gao (University of Twente)

2:15 PM CICC performance evaluation by numerical modelling of electromagnetic-mechanical properties in ITER Nb3Sn strand - Chao Zhou (University of Twente, Faculty of Science & Technology, 7522 NB Enschede, The Netherlands)
3:30 PM Coffee Break
Coffee Break
3:30 PM - 4:00 PM
Room: Exhibition and Posters Area
4:00 PM Large Scale Refrigeration and Liquefaction
Large Scale Refrigeration and Liquefaction
4:00 PM - 6:15 PM
Room: WA1
Contributions

4:00 PM ITER Cryoplant Status and Economics of the LHe Plants - Emmanuel Monneret (I)

4:15 PM ITER LHe Plants parallel operation - Eric FAUVE (ITER)

4:30 PM Acceptance plan and performance measurement methodology for the ITER cryoline system - Biswanath Sarkar (ITER-India, Institute for Plasma Research) Nitin Shah (ITER-India, Institute for Plasma Research) SATISH BADGUJAR (ITER Organization)

4:45 PM Experimental and numerical investigations for the operation of large scale helium supercritical loops subjected to pulsed heat loads in tokamaks - Christine Hoa (CEA SBT)

5:00 PM Conceptual design of the cryogenic system for the high-luminosity upgrade of the Large Hadron Collider (LHC) - Laurent Jean Tavian (CERN)

5:15 PM Helium inventory management and losses for LHC Cryogenics: strategy and results for Run 1 - Serge Claudet (CERN)

5:30 PM Rotating machinery for LHC Cryogenics: first analysis of reliability and origins of downtime - Serge Claudet (CERN)

5:45 PM Renewal of the control system and reliable long term operation of the LHD cryogenic system - Toshiyuki Mito (National Institute for Fusion Science (NIFS))

6:00 PM Final Acceptance Tests of the Helium Refrigerator for Wendelstein 7-X - Chandra Prakash Dhard (M)
New Devices and Novel Concepts
New Devices and Novel Concepts
4:00 PM - 6:00 PM
Room: WA2
Contributions

4:00 PM [Invited Oral] Solid-State Optical Cryocoolers - Richard Epstein (ThermoDynamic Films, LLC)

4:30 PM Prospective solid-state photonic cryocooler based on the “phonon-deficit effect” - Armen Gulian (Chapman University)

4:45 PM 40 K liquid Neon Energy Storage Unit - Daniel Martins (CEFITEC, Departamento de Física, FCT - Universidade Nova de Lisboa, 2829-516 Caparica, Portuga)

5:00 PM Activated Carbon-Hydrogen based continuous sorption cooling in a single adsorbent bed with a LN2 heat sink - Susmita Koley (Cryogenic Engineering Centre, IIT Kharagpur)

5:15 PM Development of a passive, adaptive and autonomous heat switch - Srinivas Vanapalli (University of Twente)

5:30 PM Superconducting antenna concept for gravitational waves - Armen Gulian (Chapman university)

5:45 PM A compact remote heat transfer device for space cryocoolers - Tao YAN (Technical Institute of Physical and Institute, Chinese Academy of Science)
Metals and Insulators
Metals and Insulators
4:00 PM - 6:15 PM
Room: WA4
Contributions

4:00 PM [Invited Oral] High-cycle fatigue properties of Alloy718 base metal and electron beam welded joint - Yoshinori Ono (N)

4:30 PM TENSILE AND FATIGUE QUALIFICATION TESTING of ITER-CS CONDUIT ALLOY JK2LB - Robert Walsh (Florida State University)

4:45 PM Extensive Characterisation of Copper-clad plates, Bonded by the Explosive Technique, for ITER Electrical Joints. - Stefanie Agnes Elisabeth Langeslag (CERN)

5:00 PM Cryogenic fatigue and stress-strain behaviour of fibre metal laminates - Wilco van de Camp (Energy, Materials and Systems, University of Twente, The Netherlands)

5:15 PM Winding Pack Height Management during Fabrication of the ITER CS Module - Nicolai Martovetsky (LLNL)

5:30 PM Fatigue and fracture toughness of cryogenic-grade epoxy resin at low temperature - Laifeng Li (Technical Institute of Physics and Chemistry)

5:45 PM A calorimeter for measurements of multilayer insulation at variable cold temperature - Thomas Funke (TU Dresden)

6:00 PM Effect of matrix modification on the interlaminar shear strength of glass fiber reinforced epoxy composites at cryogenic temperature - Laifeng Li (State Key Laboratory of Technologies in Space Cryogenic Propellants, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
6:15 PM Exhibitors Reception (free drinks and a buffet-meal will be served).
Exhibitors Reception (free drinks and a buffet-meal will be served).
6:15 PM - 9:00 PM
Room: Exhibition Area

9:00 PM Shuttle service to hotels
Shuttle service to hotels
9:00 PM - 9:30 PM
Wednesday, July 9, 2014

8:00 AM Registration desk open
Registration desk open
8:00 AM - 8:45 AM
Room: Entry hall
8:45 AM Introduction to the Day and 2 Plenary Orals
Introduction to the Day and 2 Plenary Orals
8:45 AM - 10:30 AM
Room: WA1
Contributions

8:45 AM Introduction Wednesday

8:50 AM ICMC Award for Excellence ceremony

8:55 AM ICEC Mendelssohn Award ceremony

9:00 AM The Future with Cryogenic Fluid Dynamics - Ralph G. Scurlock (Emeritus Professor of Cryogenic Engineering University of Southampton, UK)

9:45 AM Engineering and Materials Challenges in ITER Toroidal Magnet system - Arnaud Foussat (ITER Organisation)
10:30 AM Coffe Break
Coffe Break
10:30 AM - 11:00 AM
Room: Exhibition and Posters Area
11:00 AM Safety, Standards, Instrumentation and Current Leads
Safety, Standards, Instrumentation and Current Leads
11:00 AM - 1:00 PM
Room: WA1
Contributions

11:00 AM [Invited Oral] Controlled Cold Helium Spill Test in the LHC Tunnel at CERN - Torsten Koettig (CERN)

11:30 AM Modelling and experimental verification of the pressure wave following a gaseous helium storage tank rupture - Maciej Grabowski (Wroclaw University of Technology)

11:45 AM SQUID-based noise thermometer for sub-millikelvin refrigerators - Marco Schmidt (Physikalisch-Technische Bundesanstalt)

12:15 PM Standardization in Cryogenic Thermal Insulation Systems - James Fesmire (NASA)

12:30 PM Cryogenic commissioning of the new Current Lead Test Facility CuLTKa - Thomas Richter (Karlsruhe Institute of Technology (KIT))
Cryogenics for Power and Other Applications
Cryogenics for Power and Other Applications
11:00 AM - 1:00 PM
Room: WA2
Contributions

11:00 AM Air Liquide cryogenic solutions for HTS refrigeration - Cecile Gondrand (A)

11:15 AM Cryogenic tests of 30 m flexible hybrid energy transfer line with liquid hydrogen and superconducting MgB2 cable - Vitaly Vysotsky (R)

11:30 AM Innovative Superconducting DC Cable Using the Longitudinal Magnetic Field Effect - Teruo Matsushita (Kyushu Institute of Technology)

11:45 AM Towards an Optimized Coupling-Loss-Induced Quench Protection System (CLIQ) - Emmanuele Ravaioli (Twente Technical University (NL))

12:00 PM Evaluation of Warm and Cold Shaft Designs for Large Multi-megawatt Direct Drive Offshore Superconducting Wind Generators - Edward Chen (TECO Westinghouse Motor Company)

12:15 PM Cryogenic Thermal Modeling and Experimental Validation of Termination System for Helium Gas Cooled Superconducting DC Cable - Sastry Pamidi (The Florida State University)

12:30 PM Simulation of liquid level, temperature and pressure inside a 2000 liter liquid hydrogen tank during a truck transportation - Minoru Takeda (Kobe University)
BSCCO, MgB2, Fe-pnictides and New Superconducting Materials
BSCCO, MgB2, Fe-pnictides and New Superconducting Materials
11:00 AM - 1:00 PM
Room: WA4
Contributions

11:00 AM [Special Invited Oral: 2014 ICMC Award for Excellence Winner] Key microstructural features of Bi2212 and Bi2223: why is the Jc of highly textured Bi2223 smaller than that of isotropic high Jc Bi2212 round wires? - Fumitake Kametani (National High Magnetic Field Laboratory)

11:30 AM Design and development of high current density, oxide based superconductors with mechanical properties enabling their use in very high field magnets - Alexander Otto (Solid Material Solutions, LLC)

11:45 AM 5T class superconducting bulk magnet using MgB2 bulk doped with Ti - Tomoyuki Naito (Iwate University)

12:00 PM Novel Critical Current Estimation Method for Internal-Mg-diffusion-processed MgB2 Wires Based on Magnetic Microscopy - Kohei Higashikawa (Kyushu University)

12:30 PM Low Temperature- High Field performances of Iron calchogenides thin films - carlo ferdeghini (C)

12:45 PM Engineering room-temperature superconductors via ab-initio calculations - Armen Gulian (Chapman University)
1:00 PM Lunch Break (a lunch buffet will be served for all registrants)
Lunch Break (a lunch buffet will be served for all registrants)
1:00 PM - 2:15 PM
Room: Lunch Area
2:15 PM Large Scale Cryogenics II
Large Scale Cryogenics II
2:15 PM - 4:00 PM
Contributions

2:15 PM The Commissioning of the Helium Cryogenic System and LN2 Transfer System in the TPS Ring - Huang-Hsiu Tsai (NSRRC)

2:15 PM Cryogenic System Preparation for the Test of Superconducting Cavities and Cryomodules - Shin Jaehee (I)

2:15 PM Purification of recovered Helium with low level of impurities: evaluation of two different methods - Maria Pilar Lozano Bernal (University of Zaragoza) Miguel Gabal (Universidad de Zaragoza)

2:15 PM Design of Cryogenic Distribution System for RAON - Ki Woong Lee (Institution for Basic Science)

2:15 PM Helium Recovery and Purification System for the ADS program - Xiaofei Niu (Institute of Modern Physics, Lanzou, Gansu, China)

2:15 PM Numerical Study on Unsteady Flow in Centrifugal Cold Compressors - Qing Li (IPC)

2:15 PM Design of Vertical Test System for Superconducting Cavities at 2K and 4K - Feng Bai (Institute of Modern Physics, Lanzou, Gansu China)

2:15 PM Helium contamination through plastic walls - Maria Pilar Lozano (University of Zaragoza) Miguel Gabal (University of Zaragoza)

2:15 PM Conceptual Design of the Liquid Hydrogen Moderator Cooling Circuit for the European Spallation Source - Marcel Klaus (TU Dresden)

2:15 PM Design, optimization and operational parameters of multichannel cryogenic transfer line for XFEL AMTF - Paweł Duda (Wroclaw University of Technology)

2:15 PM Nelium – a Refrigerant with High Potential for the Temperature Range between 27 and 70 K - Hans Quack (TU Dresden)

2:15 PM Multivariable Pressure Control in the Compression Station of Large–cale Helium Refrigerators by Quasi-Newton Methods - zhengyu li (Technical Institute of Physics and Chemistry, China Academy of Sciences)

2:15 PM Cool-down Experiences with the SST-1 Helium Cryo System Before and after Current Feeder System Modifications - Rakeshkumar Patel (Institute For Plasma Research)

2:15 PM Cryogenic Systems Control Migration and Developments towards the UNICOS CERN Standard at INFN - Paolo Modanese (INFN, Laboratori nazionali di Legnaro, 35020 Legnaro -Padova, Italy)

2:15 PM Cryogenic Infrastructure for the Serial Magnet Test Facility for FAIR - Claus Schroeder (GSI)
Cryo-Coolers II
Cryo-Coolers II
2:15 PM - 4:00 PM
Contributions

2:15 PM Low Frequency Linear Compressors For GM and Pulse Tube Cryocoolers - Jens Hoehne (Pressure Wave Systems GmbH, Haeberlstr. 8, 80337 Munich, Germany)

2:15 PM Investigation on a High-Power Stirling Cryocooler working at 77 K - Ya XU (Institute of Refrigeration and Cryogenics, Zhejiang University)

2:15 PM An inter-phasing Stirling pulse tube cryocooler without reservoirs - Jianying Hu (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

2:15 PM Thermodynamic analysis of the cold-end connection tube influence in U-shape pulse tube cooler - Houlei Chen (Technical Institute of Physics and Chemistry ,CAS)

2:15 PM Investigation of Inertance Phase Shifting Characteristics in Small Scale Pulse Tube Cryocooler - Houlei Chen (Technical Institute of Physics and Chemistry, CAS, China)

2:15 PM Design and Testing of a Two-Stage High Capacity Stirling Cryocooler Operating below 30K - Xiaotao Wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry of CAS)

2:15 PM Experimental Investigations on Stirling type Thermally Coupled Three Stage Pulse tube Cryocoolers with ‘U’ type Configuration - H.B. Naik (Sardar Vallbhbhai National Institute of Technology Surat, Gujarat, India)

2:15 PM Experimental Study on a Cascade Pulse Tube Cooler - Mei Wu (Institute of Refrigeration and Cryogenics)

2:15 PM Experimental investigation on regenerator materials of Stirling-type pulse tube refrigerator working at 20 K - Junjie wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS) Qiang Zhou (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)
Heat Transfer I
Heat Transfer I
2:15 PM - 4:00 PM
Contributions

2:15 PM Effective Temperature of Non-uniform Temperature Distribution and Size Effects of Effective Temperature - Woo Kang Kim (Institute for Basic Science)

2:15 PM Investigation on the thermal equilibrium around a cryogenic accidental event and the impact on the possibly enclosed surrounding environment - Ketan CHOUKEKAR (ITER-India (Institute for Plasma Research))

2:15 PM Design of a heater for the CSNS cryogenic hydrogen system - Yu Zhang (Institute of High Energy Physics, CAS)

2:15 PM Heat transfer simulation to liquid nitrogen from HTS tapes at current overloads - Vasilii zubko (VNIIKP)
Accelerator and Detector Magnets
Accelerator and Detector Magnets
2:15 PM - 4:00 PM
Contributions

2:15 PM Cryogenic Distribution System for the ESS Superconducting Proton Linac - Jaroslaw Fydrych (European Spallation Source ESS AB)

2:15 PM Mathematical simulation of the unclosed 2-G HTS shield - Evgeny Kulikov (JINR)

2:15 PM Analysis of the Cryogenic Operating Scheme for SIS100 - Marion Kauschke (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

2:15 PM Cryogenics for Super-FRS at FAIR - Claus Schroeder (CrYogenic group in Common System - CSCY, GSI Helmholtzzentrum für Schwerionenforschung GmbH) Holger Kollmus (GSI Helmholtzzentrum für Schwerionenforschung GmbH) Marion Kauschke (CrYogenic group in Common System - CSCY, GSI Helmholtzzentrum für Schwerionenforschung GmbH) Yu Xiang (CrYogenic group in Common System - CSCY, GSI Helmholtzzentrum für Schwerionenforschung GmbH)

2:15 PM SSR1 and SSR2 cryomodules for the heavy ion accelerator RAON - WooKang Kim (Institute for Basic Science)

2:15 PM Advances in the Principal Design of The Superconducting Toroid for the new International AXion Observatory (IAXO) - Idan Shilon (CERN)

2:15 PM Integration and Commissioning of the ARIEL e-Linac Cryogenic System - Alexey Koveshnikov (TRIUMF)

2:15 PM Test sequence for superconducting XFEL Cavities in the Accelerator Module Test Facility (AMTF) at DESY - Joern Schaffran (DESY)

2:15 PM On the Mystery of using Helium’s Second Sound for Quench Detection of a Superconducting Cavity - Ralf Eichhorn (Cornell University)

2:15 PM Quench Modeling in High-Field Nb3Sn Accelerator Magnets - Susana Izquierdo Bermudez (CERN)

2:15 PM Current-biased transition-edge sensors based on re-entrant superconductors - Armen Gulian (Chapman University)

2:15 PM Design of the conduction-cooled HTS coils for rotating gantry - Shigeki Takayama (Toshiba Corporation)

2:15 PM Cryogenics for CADS injector - Shaopeng Li (IHEP, CAS)

2:15 PM Cryogenic Operation on the R3B-Glad Large Acceptance Superconducting Dipole Spectrometer at CEA Saclay. - Roser Vallcorba (CEA-Saclay)

2:15 PM XFEL Injector-1 cryogenic equipment - Evgeniy Pyata (BINP)

2:15 PM A structured approach to analyze the influence of channel dimensions on heat extraction via superfluid helium - Erwin Roland Bielert (CERN)

2:15 PM Operation of the SKS magnet at K1.8 beamline in J-PARC Hadron Hall - Kanae Aoki (KEK)
Current Leads and Links; Safety, Reliability and Standards
Current Leads and Links; Safety, Reliability and Standards
2:15 PM - 4:00 PM
Contributions

2:15 PM 14 kA HTS Current Leads with one 4.8 K Helium Stream for the Prototype Test Facility at GSI - Alexander Bleile (GSI Helmholtzzentrum)

2:15 PM Reliable longtime operation of the superconducting current-feeder system for the LHD - Shuichi Yamada (National Institute for Fusion Science)

2:15 PM Preliminary Study on Air in Liquid Hydrogen - Aihua LI (State Key Laboratory in Technologies of Space Cryogenic Propellants) Gang LEI (State Key Laboratory in Technologies of Space Cryogenic Propellants) Haisheng LIU (Beijing Institute of Aerospace Testing Technology) Tianxiang WANG (State Key Laboratory in Technologies of Space Cryogenic Propellants) Wenqing LIANG (Southeast University)

2:15 PM Electrical Integrity and its Protection for Reliable Operation of Superconducting Machines - Piotr Szwangruber (GSI)

2:15 PM Numerical simulation of cold helium safety discharges into a long recovery line - Jaroslaw Fydrych (European Spallation Source ESS AB) Riccard Andersson (European Spallation Source ESS AB)

2:15 PM Current lead system of the SuperKEKB final focus SC magnet cryostats - Zhanguo ZONG (kek)
ReBCO, BSCCO and Flux Pinning
ReBCO, BSCCO and Flux Pinning
2:15 PM - 4:00 PM
Contributions

2:15 PM Measurement and Analysis of Normal Zone Propagation in a YBCO coated conductor at temperatures below 50 K - Jeroen Van Nugteren (Twente Technical University (NL))

2:15 PM Reversible Ic degradation behavior in REBCO coated conductor tapes with different configuration under transverse stress - Hyung-Seop Shin (Andong National University)

2:15 PM Current Density Distribution in 2G HTS Tape in an External Magnetic Field - Dmitry Sotnikov (Russian Scientific R&D Cable Institute)

2:15 PM Long-length HTS coated conductors processed via PLD/ABAD - Alexander Usoskin (Bruker HTS GmbH) Tim Bubelis (Bruker HTS)

2:15 PM Critical Current Density in GdBa2Cu3O7-$\delta$ Coated Conductor under the Influence of Flux Creep - Yuta Onodera (Kyushu University)

2:15 PM Flux pinning and dynamics in pnictide superconductors - Martin Nikolo (St. Louis University)

2:15 PM Unconventional pinning in iron based superconductors of 122 family - Vladimir Vlasenko (LPI RAS)
3:30 PM Coffee Break
Coffee Break
3:30 PM - 4:00 PM
Room: Exhibition and Posters Area
4:00 PM Large Scale Refrigeration and Liquefaction
Large Scale Refrigeration and Liquefaction
4:00 PM - 6:15 PM
Room: WA1
Contributions

4:00 PM Specification of ESS Accelerator Cryoplant - xilong wang (European Spallation Source ESS AB)

4:15 PM Ras Laffan Helium Recovery Unit HeRUII Project - CIndy DESCHILDRE (airliquide) David GRILLOT (airliquide) Delphine PICHOT (airliquide) Franck DELCAYRE (airliquide) Frédéric ANDRIEU (airliquide) Rawia ALI SAID (Air Liquide) Vincent HELOIN (airliquide) Véronique GRABIE (airliquide)

4:30 PM ENGINEERING, PROCUREMENT, AND COMMISSIONING OF THE NEW HELIUM LIQUEFACTION FACILITY FOR GAZPROM GAZENERGOSET IN ORENBURG, RUSSIA - Klaus Ohlig (Linde Kryotechnik AG)

4:45 PM Development of a Ground Operations Demonstration Unit for Liquid Hydrogen at Kennedy Space Center - William Notardonato (NASA KSC)

5:00 PM Overview on AL.AT cryogenic solutions under 4.5K - Simon CRISPEL (Air Liquide Advanced Technologies)

5:15 PM Cryogenic cooling of the cold neutron source at ESS - John Jurns (European Spallation Source ESS AB)

5:30 PM JT-60SA: status of Cryogenic System and focus on Cryogenic Rotating Machines - Cecile Gondrand (Air Liquide Advanced Technologies)

5:45 PM CURRENT STATUS OF THE MODIFICATIONS OF THE FORMER HERA CRYOGENIC PLANT FOR THE XFEL FACILITY - Hanspeter Wilhelm (Linde Kryotechnik AG)

6:00 PM DESIGN, PROJECT EXECUTION, CONSTRUCTION AND COMMISSIONING OF THE 1.8K SUPERFLUID HELIUM REFRIGERATION SYSTEM FOR SRF CRYOMODULE TESTING - Philipp Treite (Linde Kryotechnik AG)
Regenerative Cryocoolers
Regenerative Cryocoolers
4:00 PM - 6:00 PM
Room: WA2
Contributions

4:00 PM [Invited Oral] Low-loss damping of the intrinsic temperature oscillations of 4 K pulse tube coolers - Jens Falter (TransMIT GmbH, Center for Adaptive Cryotechnology and Sensors, Heinrich-Buff-Ring 16, D-35392 Gießen (Germany))

4:30 PM Experimental investigation of compact 2K GM cryocoolers - qian bao (Sumitomo Heavy Industries, Ltd.)

4:45 PM Improved performance of an indigenous Stirling type pulse tube cooler and pressure wave generator - Subhash Jacob (Center for Cryogenic Technology, Indian Institute of Science)

5:00 PM Performance test of a G-M cooler in magnetic field. - Evgeny Kostrov (Lebedev Physical Intitute RAS)

5:15 PM The Experimental Study of Acoustically Resonant Cooling System - Jianying Hu

5:30 PM Cold inertance tube for 4 K Stirling type pulse tube cryocoolers - ZhuoPei Li (Nanjing University of Aeronautics and Astronautics)
Heat Transfer
Heat Transfer
4:00 PM - 6:00 PM
Room: WA4
Contributions

4:00 PM [Invited Oral] A deeper look into the thermodynamic perfection of the Debye equation of state for helium-3 - Yonghua HUANG (Shanghai Jiao Tong University)

4:30 PM Experimental study on helium heat transfer in a small natural circulation loop above the supercritical pressure - Bertrand Baudouy (CEA Saclay)

4:45 PM Visualization study of the growth of a spherical bubble in He II boiling under microgravity condition - Suguru Takada (National Institute for Fusion Science)

5:00 PM PIV Measurement of the Flow Field around Film Boiling in He II - Masahide Murakami (University of Tsukuba)

5:15 PM Development of a Novel Method for Exploration of the Thermal Response of Superconducting Cables to Pulse Heat Loads in Superfluid Helium - Tiemo Winkler (Technology Department, CERN, Geneva 23, CH-1211, Switzerland)

5:30 PM Transient heat transfer to He II due to a sudden loss of insulating vacuum - Steven Van Sciver (Florida State University)

5:45 PM Computational Prediction of Cryogenic Micro-Nano Solid Nitrogen Particle Production Using Laval Nozzle for Physical Photo Resist Removal-Cleaning Technology - Jun Ishimoto (Tohoku University)
6:15 PM Break
Break
6:15 PM - 6:30 PM
Room: Exhibition and Posters Area

6:30 PM Bus shuttles to Museum
Bus shuttles to Museum
6:30 PM - 7:00 PM

7:00 PM Evening Party at the Museum Twentse Welle (museum tour, free drinks and a walking dinner will be served).
Evening Party at the Museum Twentse Welle (museum tour, free drinks and a walking dinner will be served).
7:00 PM - 9:30 PM

9:30 PM Bus shuttles to conference hotels
Bus shuttles to conference hotels
9:30 PM - 10:00 PM
Thursday, July 10, 2014

8:00 AM Registration desk open
Registration desk open
8:00 AM - 8:45 AM
Room: Entry hall
8:45 AM Introduction to the Day and 2 Plenary Orals
Introduction to the Day and 2 Plenary Orals
8:45 AM - 10:30 AM
Contributions

8:45 AM Introduction Thursday

8:50 AM Cryogenics Best Paper Award ceremony

8:55 AM Introduction to ICEC/ICMC 2016

9:00 AM Cryogenics at the European Spallation Source - John G. Weisend II (European Spallation Source)

9:45 AM The Superconducting Conductor Challenge - David Larbalestier (National High Magnetic Field Laboratory)
10:30 AM Coffee Break
Coffee Break
10:30 AM - 11:00 AM
Cryogenics Components and Space Applications
Cryogenics Components and Space Applications
10:30 AM - 12:45 PM
Contributions

10:30 AM Characteristics of a cryogenic supercritical hydrogen pump with dynamic gas bearings at J-PARC - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

10:30 AM Design and fabrication of the 2K-module for the SRF test facility of Raon - Sungwoon Yoon (Institute for basic science)

10:30 AM CFD analysis of a turbo expander for cryogenic refrigeration and liquefaction cycles - Parthasarathi Ghosh (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur, India-721302)

10:30 AM Study on a Low-Temperature Refrigerator - yinong Wu (Shanghai Institute of Technical Physics, CAS)

10:30 AM Investigation of a Stirling cryocooler driven by a moving magnet linear motor - Zhenzhen ZHENG (Institude of Cryogenics and Electronics, Hefei, 230043, PR China)

10:30 AM Finite element analysis and optimization of a flexure bearing for a linear motor compressor - Maruti Khot (Mechanical Engineering Department, Walchand College of Engineering Sangli)

10:30 AM Numerical investigation of the thermal distribution and pressurization behavior in a helium pressurized cryogenic tank with a multi-component model - Lei Wang (Xi'an Jiaotong University)

10:30 AM Simulation studies on cooling of cryogenic propellant by gas bubbling - Pavitra Sandilya (Indian Institute of Technology Kharagpur)

10:30 AM A CTE heat switch for cryogenic space applications near 100 K using UHMW-Polyethylene as actuator material - Marc Dietrich (TransMIT GmbH)
Cryostats
Cryostats
10:30 AM - 12:45 PM
Contributions

10:30 AM The Numerical Simulation of a LAr Thermostat - Meifen Wang (Institute of High Energy Physics, Chinese Academy of Sciences)

10:30 AM Check-Valve with low Cracking Pressure for Gas Recovery Systems - Fridolin Holdener (WEKA AG)

10:30 AM Cooldown analysis of a cryocooler based quadrupole magnet cryostat - Anup Choudhury (IUAC, India)

10:30 AM A cryogenic treatment system for treating large rolls - Jia Guo (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)

10:30 AM Thermal and Mechanical Analysis of the Radiation Shield Design of the HiLumi-LHC Crab Cavity Cryomodule - Shrikant Pattalwar (STFC Daresbury Laboratory, UK)

10:30 AM Onset of thermoacoustic oscillations in flexible transfer lines for liquid helium - Nico Dittmar (Technische Universitaet Dresden)

10:30 AM The cryogenic system for a REBCO insert coil of a cryogen-free 25 T superconducting magnet - Sadanori Iwai (Toshiba Corporation)

10:30 AM Cryogenics for the SIS100 Synchrotron at FAIR - Branislav Streicher (GSI) Holger Kollmus (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

10:30 AM A Cryogen-free Cryostat for Neutron Scattering Experiments - Richard Down (ISIS STFC)

10:30 AM An Investigation of the Cool-Down Behavior of a Cryogenic Tank during the Filling Process - Lei Wang (Xián Jiaotong University) Yanzhong LI (Xi'an Jiaotong University)

10:30 AM The cryogenic system for the 45 T Hybrid magnet of the HFML-Nijmegen - Chris Wulffers (High Field Magnet laboratory, Radboud University Nijmegen)

10:30 AM Structural Design and Analysis of a 150 kJ HTS SMES Cryogenic System - Peng Han (Institute of Plasma Physics Chinese Academy of Sciences)

10:30 AM An optical cryostat for use in Microscopy cooled by a Stirling-type pulse tube cryocooler - Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:30 AM Test set-up for the controlled cooling of heavy magnets down to 77 K - Hugo Bajas (CERN)
Heat Transfer II
Heat Transfer II
10:30 AM - 12:45 PM
Contributions

10:30 AM Film Boiling Heat Transfer from a Round Wire to Liquid Hydrogen Flowing upwards in a Concentric Annulus - Masahiro Shiotsu (Kyoto University)

10:30 AM Development of correlations for Thermophysical properties of supercritical Nitrogen to be used in HTS cables - Jeswanth Ravula (School of Mechanical Engineering)

10:30 AM Pressure drop and heat transfer characteristics of boiling nitrogen in square pipe flow - Katsuhide Ohira (Institute of Fluid Science, Tohoku University)

10:30 AM Pressure-drop reduction and heat-transfer deterioration of slush nitrogen in square pipe flow - Katsuhide Ohira (Institute of Fluid Science, Tohoku University)

10:30 AM Superfluid helium heat pipe - Lionel DUBAND (CEA)

10:30 AM Heat transfer correlation for flow boiling of hydrocarbon mixtures inside horizontal tubes - Zou Xin (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:30 AM Two Phase Flow Pattern Map for R290 in Horizontal Smooth Tubes - Mao Qiong Gong (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:30 AM Transient heat transfer from a wire inserted into a vertically-mounted pipe to a forced flow of liquid hydrogen - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

10:30 AM Film Boiling Heat Transfer Properties of Liquid Hydrogen in Natural Convection - Yuki Horie (Kyoto-University)

10:30 AM Development of correlation for Thermophysical properties of supercritical Argon to be used futuristic HTS cables - Mohit Kalsia (School of Mechanical Engineering)

10:30 AM The optimal flow rate for parallel flow multi-stream heat exchangers - Weiping Zhu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:30 AM Development of Correlations for Thermophysical Properties of Supercritical Hydrogen in HTS Generators - Mugilan Senguttuvan (School of Mechanical Engineering)

10:30 AM Forced Flow Boiling Heat Transfer Properties of Liquid Hydrogen for Manganin Plate Pasted on One Side of a Rectangular Duct - Kazuya Yoneda (Kyoto University)

10:30 AM Transients in two-phase helium natural circulation loops - Bertrand Baudouy (CEA Saclay)
Fusion Magnets, Magnet Technology; Novel Devices and Concepts
Fusion Magnets, Magnet Technology; Novel Devices and Concepts
10:30 AM - 12:45 PM
Contributions

10:30 AM Cryogenic High Voltage Insulation Breaks for ITER - Oleg Kovalchuk (NIIEFA)

10:30 AM Cryogenic Design and Thermal Stability Analysis of a HTS Magnet for a Radiation Blackout Mitigation Experiment - Hong Wu (Karlsruhe Institute of Technology)

10:30 AM First results of transient stability analysis of ITER Central Solenoid Nb3Sn CICC with JackPot-ACDC - Tommaso Bagni (U)

10:30 AM Investigation of the influence of the clearance of a linear alternator on a thermo-acoustic electricity generator without resonator - ZhengYu Li (Technical Institute of Physics and Chemistry,CAS)

10:30 AM Cryogenic design of the 43 T LNCMI Grenoble hybrid magnet - Bertrand Hervieu (CEA-Saclay Irfu) Luc Ronayette (CNRS-LNCMI Grenoble)

10:30 AM The application of cryogens in liquid fluid energy storage systems - Junjie Wang (1.Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

10:30 AM Cold & Black Environment Design of Large Space Simulator - Min Liu (BISEE)

10:30 AM The Study of spherical door shroud in huge space environmental simulator - hua tong (Beijing institute of Spacecraft environment Engineering) ran liu (Beijing institute of Spacecraft Environment Engineering)

10:30 AM A 3He cryostat for scientific measurement in a pulsed high-magnetic field - Shaoliang Wang (Huazhong University of Science & Technology)

10:30 AM Discussion of regenerator for cryogenic energy storage - junjie Wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China;)

10:30 AM A Novel Pre-cooling System for Cryogenic Pulsating Heat Pipe - laifeng LI (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences) linghui gong (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences) rongjin huang (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences)

10:30 AM Thermodynamic analysis of a novel liquid air energy storage system - Junjie Wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

10:30 AM Impedance adjustment method study of thermo-acoustic electricity generator without resonator - ZhengYu Li (Technical Institute of Physics and Chemistry,CAS)

10:30 AM A cryogen-free cryostat for scientific experiment in a pulsed high-magnetic field - Shaoliang Wang (Huazhong University of Science & Technology)

10:30 AM Hypersonic Cryogenics; A Gauss-Markov Process - Charl E. Janeke (Kartago Inc)

10:30 AM The Cryogenic Storage Ring CSR - Robert von Hahn (Max-Planck-Institut für Kernphysik, Heidelberg)

10:30 AM Design of a PF1 coil helium inlet and dummy joint samples for fatigue tests at 77 K - Sergey Nasluzov (JSC NIIEFA)

10:30 AM High-Temperature Superconducting (HTS) Coils for a Compact Spherical Tokamak - Dieter Jedamzik (Oxford Instruments Omicron NanoScience)

10:30 AM The Design Improvement of the Superconducting Magnet of the KATRIN Cryogenic Pumping Section - Woosik Gil (Karlsruhe Institute of Technology)
Fe-pnictides, HTS bulk, Metals and Insulators
Fe-pnictides, HTS bulk, Metals and Insulators
10:30 AM - 12:45 PM
Contributions

10:30 AM Prediction of the Effective Thermal Conductivity of various powder Insulations - Lingxue Jin (KAIST)

10:30 AM Magnetoelastic Effect of 316LN-IG Stainless Steel at Low Temperatures - Anatoly Krivykh (Kurchatov Institute, Russia)

10:30 AM Magneto-transport properties and thermally activated ﬂux ﬂow in Ba(Fe0.91Co0.09)2As2 superconductor - Martin Nikolo (Saint Louis University)

10:30 AM Effect of Change of Aging Heat Treatment Pattern for JK2LB Jacket for ITER CS - Hidemasa Ozeki (Japan Atomic Energy Agency)

10:30 AM Test Apparatus utilizing Gifford–McMahon cryocooler to measure the thermal performance of multilayer insulation - Takao Ohmori (Teikyo University)

10:30 AM Low-temperature mechanical properties of MgB2 bulk fabricated by hot isostatic pressing - Akira Murakami (Ichinoseki National College of Technology)

10:30 AM Estimate of the Strong and Uniform Magnetic Field Generated by Face-to-Face HTS Bulk Magnet System - Tetsuo Oka (Niigata University)

10:30 AM Trapped Field Properties of Ring-shaped Bulk Annuli for NMR Application - Masaru Tomita (Railway Technical Research Institute)

10:30 AM Magneto-transport properties, thermally activated ﬂux ﬂow and activation energies in Ba(Fe0.95 Ni0.05)2As2 and Ba(Fe0.94 Ni0.06)2As2 superconductors - Martin Nikolo (S)

10:30 AM Analysis of the structural transformation of an ITER TF conductor jacket tube - Huihui Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:30 AM Mechanical properties of ITER PF conductor jacket material at low temperatures - Laifeng Li (Technical Institute of Physics and Chemistry)
12:45 PM Lunch Break (a lunch buffet will be served for all registrants)
Lunch Break (a lunch buffet will be served for all registrants)
12:45 PM - 2:00 PM
2:00 PM Flux pinning, Stability, and AC Losses
Flux pinning, Stability, and AC Losses
2:00 PM - 3:45 PM
Room: WA4
Contributions

2:00 PM Vortex dynamics and irreversibility line in FeSe0.25Te0.75. - Alessandro Puri (High Field Magnet Laboratory, Institute of Molecules and Materials, Radboud University Nijmegen, Toernooiveld 7, 6525 ED Nijmegen, Netherlands)

2:15 PM AC Loss tests on CORC and stacked tape REBCO cables - Kostyantyn Yagotyntsev (University of Twente, Faculty of Science & Technology, 7522 NB Enschede, The Netherlands)

2:30 PM Filamentary MgB2 wires for AC applications - Pavol Kováč (Institute of Electrical Engineering of SAS)

2:45 PM Intra-strand resistance and current transfer length in multifilamentary NbTi, Nb3Sn, MgB2, BSSCO and ReBCO conductors - Chao Zhou (University of Twente, Faculty of Science & Technology, 7522 NB Enschede, The Netherlands)

3:00 PM The influence of the Al stabilizer layer thickness on the normal zone propagation velocity in high current superconductors - Idan Shilon (CERN)

3:15 PM Current imbalance and AC losses of long distance DC HTS cable - Yury Ivanov (Chubu University)

3:30 PM Minimum Quench Energy and Propagation Velocity in Superconductoring Cables with Longitudinal Lateral Cooling - Yifeng Yang (University of Southampton)
Fusion and High Current Cables
Fusion and High Current Cables
2:00 PM - 3:45 PM
Room: WA1
Contributions

2:00 PM First Operational Results of the SST-1 Superconducting Magnet Cryogenics Systems - Subrata Pradhan (Institute for Plasma Research)

2:15 PM Fabrication of a prototype HTS conductor for fusion magnets - Davide Uglietti (EPFL)

2:30 PM Demonstration of a 60 kA-class 6-around-1 high-temperature superconducting Conductor on Round Core Cable in Conduit Conductor - Fraser Douglas (A)

2:45 PM A round Rutherford cable concept with HTS Roebel Coated Conductors strands - Anna Kario (Karlsruhe Institute of Technology)

3:00 PM Development of high-temperature superconducting Conductor on Round Core magnet cables - Danko van der Laan (Advanced Conductor Technologies and University of Colorado)

3:15 PM Upgrade of EDIPO for HTS cable test - Rainer Wesche (EPFL, CRPP)

3:30 PM Analysis of the ITER PF coil joints under the reference operating scenario - Yury ILYIN (ITER Organization)
Cryogenics Components and Cryostat Technology
Cryogenics Components and Cryostat Technology
2:00 PM - 3:45 PM
Room: WA2
Contributions

2:00 PM Jet pump for liquid helium circulation through the fast cycling superconducting magnets of Nuclotron - Nikita Emelianov (Joint Institute for Nuclear Research)

2:15 PM Modeling and Commissioning of a cold compressor string for the superfluid cryogenic plant at Fermilab's Cryo-Module Test Facility (CMTF) - Can Üresin (Linde Kryotechnik AG)

2:30 PM Control methodology and test modes during the qualification test of an ITER Cold Circulator - Biswanath SARKAR (ITER-India, Institute for Plasma Research) Ritendra Bhattacharya (ITER-India, Institute for Plasma Research)

2:45 PM Cryostat and Subsystems Development at ITER - Igor Sekachev (ITER Organization)

3:00 PM Cryogenic Design of the new High Field Magnet Test Facility at CERN - Vladislav Benda (CERN)

3:15 PM Performance and Results of the LBNE 35 ton Membrane Cryostat Prototype - David Montanari (Fermi National Accelerator Laboratory)

3:30 PM Calculation and measurement of thermal radiation through a pipe-shaped shield - Yusuke Sakakibara (University of Tokyo)
3:45 PM Coffee Break
Coffee Break
3:45 PM - 4:15 PM
Room: Exhibition and Posters Area
4:15 PM Accelerators and Detectors
Accelerators and Detectors
4:15 PM - 6:30 PM
Room: WA1
Contributions

4:15 PM [Invited Oral] Beyond the Large Hadron Collider: a first look at cryogenics for CERN Future Circular Colliders - Laurent Jean Tavian (CERN) Philippe Lebrun (CERN)

4:45 PM Design of a cosine-theta dipole magnet wound with coated conductors considering their deformation at coil ends during winding process - Naoyuki Amemiya (Kyoto University)

5:00 PM Conductor and Coil Design of the 2 tesla Solenoid for the PANDA Detector at FAIR - G. Rolando (CERN)

5:15 PM Thermodynamic Properties of the Superconducting Dipole Magnet of the SIS100 Synchrotron - Alexander Bleile (GSI)

5:30 PM The Cornell Main Linac Cryomodule: a Full Scale, High Q Accelerator Module for cw Applications - Ralf Eichhorn (Cornell University)

5:45 PM The ESS Cryomodule Test Stand - Wolfgang Hees (ESS)

6:00 PM The ICARUS T600 Module liquid argon purification system - Chiara Vignoli (INFN)

6:15 PM Final commissioning of the superconducting heavy ion linear accelerator at IUAC. Delhi - Tripti Sekhar Datta (Inter-University Accelerator Centre, New Delhi. India)
Space Cryogenics Applications
Space Cryogenics Applications
4:15 PM - 6:30 PM
Room: WA2
Contributions

4:15 PM [Invited Oral] Performance Testing of the Flight Model Astro-H 3-stage ADR - Peter Shirron (NASA/GSFC, Cryogenics and Fluids Group)

4:45 PM Towards a $^3$He-$^4$He closed cycle dilution refrigerator for space - Gerard VERMEULEN (Institut Neel (CNRS))

5:00 PM Sorption-based helium-3 pump for a closed-cycle dilution refrigerator - Marcel ter Brake (University of Twente, The Netherlands)

5:15 PM Experimental investigation of Pressure-Volume-Temperature mass gauging method under micro-gravity condition by parabolic flight - Mansu Seo (Cryogenic Engineering Laboratory, Mechanical engineering department, KAIST) Sangkwon Jeong (Cryogenic Engineering Laboratory, Mechanical engineering department, KAIST)

5:30 PM Cryogenic design of a large superconducting magnet for astro-particle shielding on deep space travel missions - romain bruce (CEA Saclay)

5:45 PM An ultra-low background millikelvin optical test facility for TES bolometers - Michael Audley (SRON Netherlands Institute for Space Research)

6:00 PM An Innovative Approach to Flexible Thermal Straps using Aluminum, Copper, and Pyrolytic Graphite Film - Eugenio Urquiza (T)

6:15 PM Thermal property measurements of critical materials for SPICA payload module - Keisuke Shinozaki (Aerospace Research and Development Directorate, JAXA)
Heat Transfer and Materials Testing
Heat Transfer and Materials Testing
4:15 PM - 6:30 PM
Room: WA4
Contributions

4:15 PM Pumping speed offered by Activated Carbon at liquid Helium temperatures by sorbents adhered to indigenously developed Hydroformed Cryopanel - Ranjana Gangradey (Cryopump Project, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India, 38242008)

4:30 PM Evaluation of accuracy about prediction method of cryogenic tensile strength for austenitic stainless steels in ITER Toroidal Field Coil Structure procurement activity - Takeru Sakurai (JAEA)

4:45 PM Performance Evaluation of Heat Tranfer Enhancement in Plate-Fin Heat Exchangers with Offset Strip Fins - Yanzhong Li (Xi’an Jiaotong University) Yujie Yang (Xi’an Jiaotong University)

5:00 PM A Hydrogen Pulsating Heat Pipe - Yumeng LIU (Institute of Refrigeration and Cryogenics, Zhejiang University)

5:15 PM Measurements of convection heat transfer coefficients for hydrocarbon mixtures during boiling in a heated horizontal pipe from 100 K to room temperature - Rodrigo Barraza (University of Wisconsin-Madison)

5:30 PM Prevention methods of natural convection in inclined pipes – an experimental study - Robin Langebach (TU Dresden)

5:45 PM CFD Simulations and Visualization of Experimental Verification study on Nucleate Pool Boiling of Liquid Nitrogen - Wei XIONG (Zhejiang University)

6:00 PM Film-wise condensation characteristics at liquid nitrogen temperatures - Yuan Tang (Institute of Refrigeration and Cryogenics, Zhejiang University, Hangzhou, 310027, P. R. China)

6:15 PM Design and Testing of 100 mK High-Voltage Electrodes for AEgIS - Jan Hendrik Derking (CERN)
6:30 PM Break
Break
6:30 PM - 7:00 PM

7:00 PM Bus shuttles to Banquet
Bus shuttles to Banquet
7:00 PM - 7:30 PM

7:30 PM Conference Banquet in Restaurant "De Jaargetijden".
Conference Banquet in Restaurant "De Jaargetijden".
7:30 PM - 10:30 PM

10:30 PM Bus shuttles back to hotels
Bus shuttles back to hotels
10:30 PM - 11:00 PM
Friday, July 11, 2014
8:00 AM
8:00 AM - 7:00 PM
Contributions

8:00 AM Excursion 1 to AmpaCity in Essen/Germany (cable project) and High Magnetic Field Laboratory, HMFL - Nijmegen

8:00 AM Excursion 2 to Philips Healthcare, Stirling and Thales - Eindhoven

10:30 AM Excursion 3 to MESA+ NanoLab and EMS Cryogenics and Applied Superconductivity Labs
7:00 PM Conference site closes
Conference site closes
7:00 PM - 7:30 PM