Thermosiphon meeting

→ Europe/Zurich
298/1-003 (CERN)

298/1-003

CERN

10
Show room on map
Michele Battistin (CERN)
    • 10:00 → 10:10
      Action List 10m
    • 10:10 → 10:50
      Actions List Review 40m
      Greg Sonar: EL cabinet: Cyril and Sergei installed on the roof but not fixed. Installation today or tomorrow. Ethernet foreseen on 25-26th of November. Action list: Water P&ID: the P&ID does not correspond to the Thermosiphon P&ID Cecilia has asked Iniziative to redo P&ID and Technical documentation in conformity with Lukasz UNICOS. Water circuit: Butterfly valves to be replaced (Stefano): they will be relaxed later on. We will store the new valves and replace them at the first occasion. Iniziative will fix small problems and then we will fill the circuit. Cabling: visit with Anders done. List of actions. Water circuit: no GS on valve GS1531 and the GS on the HV1530 – expected arrival before Xmas. the cable tray on the roof shall be protected: material is here now. Cyril and Jan to ask Michail and Juri. Still pending. After cabling. New cabling is foreseen on 25-26th of November: Cyril and Sergei will install the sonar cabinet before 25th of November. Ineo is cabling now. This is missing: - sonar system - vacuum pump - position switches of the GS1531 and HV1530 - positioner of the brine by-pass By-pass: actuator of valve PV2201 switch is installed and shall be cabled. Extra-cable lay-down 25-26/11/13: some cable is missing: Red telephone One general alarm signal 16 A socket One multilayer pipe to connect the vacuum pump in SX1. Ethernet cable Lighting. EL connection: it is definitive now!! APAVE visit done: Anders has officially checked with HSE and there are no ACTIONS to be taken on the chiller. Check the signal of the scale of the condenser. Condenser: we shall check the white powder: Friday 22/11/13 Floriane + Cyrill to go to the roof and take samples. Pneumatics: Cyrill to check the presence of the Nitrogen bottle connected in SH1. Cyrill to connect the nitrogen line to the valve on the top of the C6F14 tank. Cyrill to connect the pneumatic line to the water valve PV1531. DONE Vacuum: Install the vacuum pump in SX1 and the Swagelok valve close to sonar. Michail and Juri to create a small support to install the pump on the wall on the side of the EL cabinets in SX1. C6F14 pipe: Filled !! 21 barrels entered (5.250 kg) Lagging: Finish the insulation on the roof is possible now. Tchuflian shall wait for the final connection to the condenser of the C6F14. List of insulation point on Cyril document attached. Etiquettes: Pierre is filling the Infor database on excel format -> NO ADVANCEMENT SINCE 17/10/2013 Claudio to retrieve the information from Stefano Moccia concerning Water circuit Claudio started entering the information for the chiller. Etiquettes for external installation to be done. Hard etiquettes shall be produced (Claudio). Civil Engineering: Fix the pipe passages on the walls on different locations: Michele has sent an mail to Eliseo again. Ask Eliseo concerning the roof on the condenser: before Xmas. Red telephones (Olivier): Install a red telephone on the roof Documentation: Ceclia to suggest a folder structure for EDMS. Next week Paula will do the new structure!! Commissioning: commissioning forms are ready. No advancement during week 18-22 of november. Functional test from Jose & Daniel docs. I/O test is running: Water circuit: 90% Brine circuit: 90% Chiller: 0% Thermosiphon: 0% Brine temperature regulation to be checked… Pierre has found the positioned for the actuator. This is not good, Pierre has ordered another one now. Control: Waiting for answer from J&E Hall received: we will receive the answer on November 18th. Thermosiphon PLC program is ready: Benjamin presented the synoptics. Monday 18th we will se the simulator. J&E Hall intervention: it is programmed for and of January 2014!
      Speaker: Michele Battistin (CERN)
    • 10:50 → 11:00
      Any Other Business 10m
      Speakers: Claudio Bortolin (Universita e INFN (IT)), Cyril Degeorge (Indiana University (US)), Daniel Lefils (CERN), Florian Corbaz (CERN), Gregory Hallewell (Centre National de la Recherche Scientifique (FR)), Jan Godlewski (CERN), Lukasz Zwalinski (CERN), Olivier Crespo-Lopez (CERN)