Speaker
Heinz Pernegger
(CERN)
Description
The Pixel Detector of the ATLAS experiment has shown excellent performance
during the whole Run-1 of LHC. Taking advantage of the long showdown, the detector was extracted from the experiment and brought to surface, to equip it with new service quarter panels, to repair modules and to ease installation of the Insertable B-Layer (IBL).
IBL is a fourth layer of pixel detectors, and has been installed in May 2014 between the existing Pixel Detector and a new smaller radius beam-pipe at a radius of 3.3 cm.
To cope with the high radiation and pixel occupancy due to the
proximity to the interaction point, a new read-out chip and two
different silicon sensor technologies (planar and 3D) have been developed.
Furthermore, the physics performance will be improved through the
reduction of pixel size while, targeting for a low material budget,
a new mechanical support using lightweight staves and a CO2 based cooling system have been adopted.
An overview of the refurbishing of the Pixel Detector and of the IBL project as well as the experience in its construction will be presented, focusing on adopted technologies, module and staves production,qualification of assembly procedure, integration of staves
around the beam pipe and commissioning of the detector.
Primary author
Heinz Pernegger
(CERN)
