Name: 1st PACMAN Workshop
Start: 2015-02-02T08:30:00+01:00
End: 2015-02-04T19:00:00+01:00
Location: CERN

1st PACMAN Workshop

from Monday 2 February 2015 (08:30) to Wednesday 4 February 2015 (19:00)

Monday 2 February 2015

08:30

08:30 - 09:00
Room: 60/6-015 - Room Georges Charpak (Room F)
09:00
09:00 - 10:15
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

09:00 Welcome - Steinar Stapnes (CERN)

09:15 Introduction to PACMAN from the chairman of PACMAN Supervisory Board - Paul Shore (Cranfield University)

09:45 PACMAN: technical details - Helene Mainaud Durand (CERN)
10:15

10:15 - 10:45
Room: 60/6-015 - Room Georges Charpak (Room F)
10:45
10:45 - 12:30
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

10:45 State of the art of very high precision measurements in metrology - Paul Morantz (Cranfield University)

11:15 Broad band seismic instrumentation - Cansun Guralp (Guralp Systems Ltd.)

11:45 Support and actuation of the segmented primary mirror of the E-ELT - Gert Witvoet (TNO)

12:15 Group picture
12:30

12:30 - 14:00
14:00
14:00 - 15:30
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

14:00 Stretched wire techniques for a 15 GHz RF-BPM - Silvia Zorzetti (CERN)

14:30 Experience on design, prototyping and testing of the cavity BPM for the European-XFEL - Dirk Lipka (DESY)

15:00 RF and digital signal processing of HOM and cavity BPM signals - Nathan EDDY
15:30

15:30 - 16:00
Room: 60/6-015 - Room Georges Charpak (Room F)
16:00
16:00 - 17:30
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

16:00 EM field alignment of the CLIC accelerating structure with help of WFM signals - Natalia Galindo Munoz (CERN)

16:30 Stretched wire measurements and impedance matching - Andrea Mostacci (Sapienza University of Rome e INFN-Roma I (IT))

17:00 Wake field monitors conception, installation and measurements in the CTF3 TBM and TBTS - Reidar Lunde Lillestol (CERN/Uni. Oslo)
17:30

17:30 - 18:30
Room: 60/6-015 - Room Georges Charpak (Room F)

18:30

18:30 - 20:00
Room: glass box (restaurant 1)
Tuesday 3 February 2015
09:00
09:00 - 10:40
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

09:00 Some physical aspects of tactile measurements - Jürgen Schneider (Hexagon Metrology)

09:25 Non contact high precision sensor for Leitz Infinity Coordinate Measuring Machine - Claude.anne Sanz (CERN)

09:50 FSI developments at NPL - Ben Hughes (NPL)

10:15 Development and validation of an absolute Frequency Scanning Interferometry network - Solomon William Kamugasa (CERN)
10:40

10:40 - 11:05
Room: 60/6-015 - Room Georges Charpak (Room F)
11:05
11:05 - 12:45
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

11:05 Development of targets for laser interferometry - Miroslav Sulc (Liberec Technical University (CZ))

11:30 Multilateration for machine calibration and deformation analysis - Heinrich Schwenke (Etalon AG)

11:55 micro-triangulation for Automated Contactless High-Precision metrology - Sébastien Guillaume (ETH Zürich)

12:20 Micro-triangulation for high accuracy short range measurements of dynamic objects - Vasileios Vlachakis (CERN)
12:45

12:45 - 14:00
14:00
14:00 - 15:40
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

14:00 Ultra precise quadrupoles magnet assembly and testing. Integration of an alignment test-bed towards an industrial production - Iordan Petrov Doytchinov (CERN)

14:25 Challenges, experience and expectations for precise machining - Alicia Gomez (DMP)

14:50 Actuation and alignment challenges of LHC collimators - Marco Garlasche (CERN)

15:15 Seismic sensor development and vibration characterization - Peter Novotny (CERN)
15:40

15:40 - 16:05
Room: 60/6-015 - Room Georges Charpak (Room F)
16:05
16:05 - 18:00
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

16:05 Seismology: sensors, measurements, modelling and analysis - Glenn Cougoulat (ISTerre)

16:30 Design and validation of a nanopositioning system for the MB quadrupole - Stef Janssens (CERN)

16:55 Nano-positioning of the main linac quadrupole as means of laboratory pre-alignment - David Tshilumba (CERN)

17:20 Discussion
19:30

19:30 - 21:00
Wednesday 4 February 2015
09:00
09:00 - 10:15
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

09:00 The activities and the equipment available in the magnetic measurement working group at the PTB - Martin Albrecht (PTB)

09:25 Theory and applications of the vibrating stretched wire technique for high-precision quadrupole alignment - Alexander Temnykh (Cornell University)

09:50 Stretched wire systems for the magnetic measurement of small-aperture magnets - Domenico Caiazza (CERN)
10:15

10:15 - 10:40
Room: 60/6-015 - Room Georges Charpak (Room F)
10:40
10:40 - 11:55
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

10:40 A review of the state of the art, present norms and future trends in the field of measurement uncertainty estimation - Walter Bich (INRIM)

11:05 PCB Coil and stretched wire systems for high-precision quadrupole alignment - Joe Di Marco (Fermilab)

11:30 PCB technology for small diameter field probes - Giordana Severino (CERN)
11:55
11:55 - 12:45
Room: 60/6-015 - Room Georges Charpak (Room F)
Contributions

11:55 Summary

12:30 Conclusion of the workshop - Laszlo Abraham (NI Hungary Ltd)
12:45

12:45 - 14:00

14:00

14:00 - 15:30
Room: 60/6-015 - Room Georges Charpak (Room F)

15:30 Brainstorming/discussion meeting
Brainstorming/discussion meeting
15:30 - 17:30
Room: 60/6-015 - Room Georges Charpak (Room F)

Choose timezone