Name: Workshop Chamonix XIV
Start: 2005-01-17T08:30:00+01:00
End: 2005-01-21T18:00:00+01:00
Location: CERN

Workshop Chamonix XIV

from Monday 17 January 2005 (08:30) to Friday 21 January 2005 (18:00)

Monday 17 January 2005

08:55

08:55 - 09:00
Room: 503/1-001 - Council Chamber
09:00
09:00 - 12:30
Room: 503/1-001 - Council Chamber
Contributions

09:00 Overall Beam Commissioning Strategy - Mike Lamont (LFC)

09:40 Transfer and Injection - Brennan Goddard (CERN)

10:05 450 GeV - Paul Collier (CERN)

10:50 Ramping & Snapback - Andrew Butterworth (CERN)

11:15 Squeeze - Oliver BRÜNING (CERN)

11:40 BDI - Hermann Schmickler (CERN)
14:00
14:00 - 17:30
Room: 503/1-001 - Council Chamber
Contributions

14:00 Introduction to Scheduling LHC Operation - Roger Bailey (CERN)

14:15 Machine checkout and setup periods - Jan Uythoven (CERN)

14:35 LHC Scrubbing Runs - Jose Miguel Jimenez (CERN)

15:00 Access System and its impact on LHC operation - Ghislain Roy (CERN - AB DEPARTMENT)

15:40 LHC Equipment Maintenance Policy and Requirements. - Thomas pettersson (TS/CSE)

16:00 Experiments’ desires and constraints during the early LHC operation - Daniela Macina (CERN)

16:25 LHC Operation with Heavy Ions - John Jowett (CERN)

16:50 Operation for TOTEM - Jorg Wenninger (CERN)
Tuesday 18 January 2005
09:00
09:00 - 12:30
Room: 503/1-001 - Council Chamber
Contributions

09:00 How to deal with leaks in the QRL and magnet insulation vacuum - Germana Riddone (CERN AT-ACR) Paul Cruikshank (CERN AT-VAC)

09:25 HOW TO DEAL WITH LEAKS IN THE LHC BEAM VACUUM - Vincent Baglin (CERN)

09:50 Shortcuts during installation and commissioning: risks and benefits - germana riddone (CERN)

10:35 Commissioning the DFB - Antonio Perin (AT/ACR)

11:00 The cryogenics system in pt 4: possible options - Serge CLAUDET (CERN AT ACR)

11:25 Issues concerning the reliability of the LHC cryogenic system - Manel Sanmarti (AT-ACR, CERN)
14:00
14:00 - 17:30
Room: 503/1-001 - Council Chamber
Contributions

14:00 Electrical Quality Assurance (ELQA) - Davide Bozzini (CERN)

14:25 Report from the Magnet Polarity Coordinator - Stephan Russenschuck (CERN AT-MEL-EM)

14:50 Quench Protection System - Reiner Denz (CERN AT-MEL-PM)

15:15 Consequences of RF system failures during LHC beam commissioning. - Trevor Linnecar (CERN)

16:00 Initial commissioning of critical beam instrumentation systems - Eva Barbara Holzer (CERN)

16:25 The estimation of individual and collective intervention doses for the LHC beam cleaning insertions - Markus Brugger (CERN SC/RP)

16:50 The LHC Access System: why do we put doors ? - Luigi Scibile (TS/CSE)
Wednesday 19 January 2005
09:00
09:00 - 12:30
Room: 503/1-001 - Council Chamber
Contributions

09:00 Milestones for the lead injector complex commissioning - Stephan MAURY (CERN)

09:20 Experience with the TI 8 and TT40 tests - Jan Uythoven (CERN)

09:45 Overview of the LHC and transfer line optics configurations and tolerances - Helmut Burkhardt (CERN)

10:10 Experience with the transfer line matching and options for improving the transfer line flexibility - Thys RISSELADA (CERN)

10:45 Safe Injection into the LHC - Verena Kain (CERN)

11:10 Experiments’ equipment directly interfering with the beam operation - Daniela Macina (CERN)

11:35 Experiment-machine interface issues and signal exchange - Emmanuel Tsesmelis (CERN)
14:00
14:00 - 17:30
Room: 503/1-001 - Council Chamber
Contributions

14:00 Update on LHC installation schedule - Sylvain Weisz (CERN)

14:40 Compressed Schedule - The layout point of view - Samy Chemli (CERN)

14:55 INSTALLATION OF LSS - MARIA SONIA BARTOLOME JIMENEZ (CERN)

15:40 Magnets Cold Tests and Throughput - Vinod Chohan (CERN)

16:05 Hardware Commissioning - Roberto Saban (CERN)

16:40 Controls - Rüdiger Schmidt (CERN)
Thursday 20 January 2005
09:00
09:00 - 15:00
Room: 503/1-001 - Council Chamber
Contributions

09:00 What are today’s issues in the production of the Main Bends and Quads ? - Lucio Rossi (CERN)

09:25 What are today's issues for all other magnets. - Karl Hubert Mess (CERN AT-MEL)

09:50 What will the geometry of the Main Bends and Short Straight Sections (SSS) be ? - Elena Wildner (CERN)

10:35 Estimates of the LHC magnetic optics versus requirements - Ezio Todesco (CERN)

11:00 How the magnetic measurements and the Reference Magnet System (RMS) will be used for commissioning ? - luca bottura (MTM)

11:25 Magnetic behavior of the correctors: issues for machine operation - Walter Venturini Delsolaro (CERN)

14:00 Are there issues due to a long term outdoor storage ? - Davide Tommasini (CERN)

14:30 Installation strategy: which lessons from sector 7/8? - luca bottura (MTM)
15:00
15:00 - 18:30
Room: 503/1-001 - Council Chamber
Contributions

15:00 Machine Protection System(s) - Overview - Ruediger Schmidt (CERN)

15:30 Collimators and Beam Absorbers for Cleaning and Machine Protection - Ralph Assmann (CERN)

16:15 LHC aperture and commissioning of the collimation system - Stefano Redaelli (CERN)

16:40 Beam instrumentation other than BLMs linked to the machine protection system - Rhodri Jones (CERN)
Friday 21 January 2005
09:00
09:00 - 12:30
Room: 503/1-001 - Council Chamber
Contributions

09:00 Commissioning of the protection systems - Jorg Wenninger (CERN)

09:25 Objects Capable of Touching the Beams - Paul Collier (CERN)

09:50 Will we ever get the green light for beam operation - Jan Uythoven (CERN)

10:35 Beam loss induced quench levels - Andrzej SIEMKO (CERN AT-MTM)

11:00 Damage Levels: Comparison of experiment and simulation - Verena Kain (CERN)
14:30 Discussion
Discussion
14:30 - 18:00
Room: 503/1-001 - Council Chamber

Choose timezone