Name: 2016 IEEE Power Modulator and High Voltage Conference
Start: 2016-07-05T07:30:00-07:00
End: 2016-07-09T18:00:00-07:00
Location: Palace Hotel San Francisco

2016 IEEE Power Modulator and High Voltage Conference

from Tuesday 5 July 2016 (07:30) to Saturday 9 July 2016 (18:00)

Monday 4 July 2016
Tuesday 5 July 2016

12:00

12:00 - 17:00
Room: Sea Cliff

13:00

13:00 - 17:00
Room: Regency Foyer

15:00 Registration
Registration
15:00 - 20:00
Room: Regency Foyer

18:00 Welcome Reception
Welcome Reception
18:00 - 20:00
Room: Grand Ballroom
Wednesday 6 July 2016

07:30 Continental Breakfast
Continental Breakfast
07:30 - 08:15
Room: Grand Ballroom
08:15
08:15 - 09:30
Room: Ralston Ballroom
Contributions

08:15 Daily Operation of Z: An 80 Terawatt, 36 Module Pulsed Power Driver - Mark Savage (Sandia National Laboratories)
09:30 Coffee Break
Coffee Break
09:30 - 10:00
Room: Grand Ballroom
10:00 Dielectrics, Insulation, and Breakdown 1
Dielectrics, Insulation, and Breakdown 1
10:00 - 12:00
Room: Ralston Ballroom
Contributions

10:00 Charge trapping/detrapping characteristics and lifetime of solid dielectrics - George Chen (University of Southampton)

10:30 Two-dimensional numerical modeling of electric field and correlation to breakdown – Area scaling - Enis Tuncer (Texas Instruments Inc.)

11:00 Energy Consumption Characteristics of Pulsed Arc Discharge in High Pressure Carbon Dioxide up to Supercritical Phase - Tomohiro Furusato (Nagasaki University)

11:15 An AC Arc Discharge Model for Ice-Covered FRP Live-Line Tools - Mona Ghassemi (INGIVRE\UQAC)

11:30 Characterization of Double-Positive Metamaterials for Advanced Applications - Aric Pearson (University of Missouri)

11:45 Seismic Wave Characteristic of Ground Surface Layer Produced by Pulsed Discharges in Closed Water Domain - Chengyan Ren (Institute of Electrical Engineering, Chinese Academy of Sciences)
Accelerators, Beams, and Repetitive Pulsed Power
Accelerators, Beams, and Repetitive Pulsed Power
10:00 - 12:00
Room: Gold Ballroom
Contributions

10:00 Core and copper loss effects on the stepped impedance transmission line pulse generator - Andras Kuthi (University of Southern California)

10:15 Design of Bipolar Pulse Generator Topology Base on Marx Generator Supplied by Double Power - Chenguo Yao (Chongqing University) shoulong dong (Chongqing University)

10:45 Design and testing of a compact low impedance Marx generator with quasi rectangular pulse - Hongwei Liu (Institute of Fluid Physics)

11:00 Initial Evaluation of the Load Current Multiplier Concept on the Sandia Z Accelerator - George Laity (Sandia National Laboratories)

11:45 Repetitive pulse X-rays generator based on all solid state pulsed power source - Jianqiang Yuan (China Academy of Engineering Physics)
12:00 Lunch Break
Lunch Break
12:00 - 13:30
13:30
13:30 - 15:00
Room: Twin Peaks
Contributions

14:10 HIGH-FIELD EXCITED FLASHOVER ACROSS SOLID DIELECTRICS IN VACUUM: MECHANISM AND SUPPRESSION - Guan-Jun Zhang (Xi'an Jiaotong University)

14:30 Investigation Dielectric Materials at Different Frequency Ranges - Emel Onal (Istanbul Technical University, Electrical Engineering Dep.)

14:40 High Power Microwave Pulse Compressors With a Variable Geometry of Accumulative Resonant Cavity

14:40 Permittivity and Permeability in Double Positive Metamaterials Fabricated with Barium Titanate - Kelli Noel (University of Missouri)

14:40 Towards sub-ppm Shot-to-shot Amplitude Stability of SwissFEL Resonant Kicker - Martin Paraliev (PSI)

14:40 Thyratron Stability Improvements of SNS Extraction Kicker System

14:40 A 400A programmable linear current pulse generator - Tony Fowler (CERN)

14:40 GYROMAGNETIC NONLINEAR TRANSMISSION LINE WITH SEALED SPARK GAP - Robert Ryan (Texas Tech University)

14:40 Chopper-Marx Circuit for Application to ILC: 2. Charging and System Control - Takumi Hayashi (Nagaoka University of Technology)

14:40 A 100kV Nanosecond Pulse Generator Based on Magnetic Pulse Compressor - dong zhang

14:40 sub-microsecond Pulse Generators Based on Magnetic Pulse Compression System - Dongdong Zhang (Institute of Electrical Engineering, Chinese Academy of Sciences)

14:40 Electro-Convection in Liquids in Absence of Ionization - Alexander Pokryvailo (Spellman High Voltage Electronics Corp.)

14:40 Insulation deterioration of twisted pairs due to high frequency switching of power Electronic Converters (PECs)

14:40 MULTICHANNEL SIGNAL SYNTHESIS IN FREE SPACE - Zachary Shaw (Texas Tech University)

14:40 Stability of thyratron switching in LCLS linac modulators - Andrew Benwell (SLAC)

14:40 A High Repetition-rate Bipolar Nanosecond Pulse Generator Based on Magnetic Pulse Compression System - Yan Mi (College of Electrical Engineering, Chongqing University, China)

14:40 Numerical analysis on the output characteristics of a linear switch array pulse modulator - Tonglei Wang (Xi'an Jiaotong University)

14:40 Construction and commissioning Xbox3: a very high capacity X-band test stand - Gerard Mcmonagle (CERN)

14:40 Effects of Thyratron Aging on Klystron RF Pulse Stability - Paolo Delgiusto

14:40 High Power Microwave Production with a Nanosecond Pulser and Nonlinear Transmission Line - James Prager (Eagle Harbor Technologies, Inc.)

14:40 A two dimensional circuit model of induction cavity - Guo Fan (Institute of Fluid Physics)

14:40 SURFACE FLASHOVER CHARACTERISTICS OF GROOVED NANODIELECTRICS UNDER PULSED VOLTAGE IN PARTIAL VACUUM - Yuxuan Chen (Auburn University)

14:40 Dielectric Strength Testing of 3D Printed Polymeric Materials - Brad Hoff (Air Force Research Laboratory)

14:40 Dielectric properties and surface flashover characteristics of Al2O3-filled epoxy resin in subatmospheric pressure under 20-200 kHz applied pulsed fields - Hulya Kirkici (Auburn University)

14:40 DESIGN AND PERFORMANCE OF AN 8 LINE GYROMAGNETIC NONLINEAR TRANSMISSION ARRAY - Hunter Cravey (Texas Tech University)

14:40 GW-class relativistic backward-wave oscillator with pulse duration above 200 ns - Xingjun Ge (National University of Defense Technology)

14:40 Analysis of Peak Output Voltage and Droop from a Nonuniform Transmission Line - Chongyang Mao (Tsinghua University)

14:40 Characterization and Fabrication of Carbon Nanotubes Grown on Ceramic Substrates for High Temperature RFID Applications - Baha Yakupoglu (Auburn University)

14:40 Partial discharge measurements and IEC standards: Justification of the use for their inclusion in afterlaying test for extruded cable systems - Dejan Bešlija (Faculty of Electrical Engineering Sarajevo) Mirza Batalović (Faculty of Electrical Engineering)

14:40 Performance improvement of a compact pulsed neutron generator with a vacuum arc ion source - zhen yang (China Academy of Engineering Physics)

14:40 Modular Marx Generator - Kirk Rainwater (TTU)

14:40 Development of Variable Charging System for Voltage Adjustment - Ryoma Ogata (iwate university)

14:40 Effects of mechanical pre-stress on the dielectric strength of alumina Al2O3 - Zenjebil Jouini (Laplace Université Paul Sabatier)

14:40 simulation and design of the multi-channel isolated charging for solid-state MARX generators

14:40 Analysis of Insulation Failure of Polymer Composite Blocks Using High Frequency Wave Shapes - Elanseralathan Kasinathan (Pondicherry Engineering College) Logesh Guber (Pondicherry Engineering College) Makendran Gunasekaran Malaiyappasamy Sivashanmugam (Pondicherry Engineering College)

14:40 A Marx-Based Power Converter topology as a Current Source for Pulsed Magnets in Particles Accelerators - Davide Aguglia (CERN)

14:40 Custom designed Dummy Loads for HV Pulsed Power Modulator Testing - Michael Osemann (Ampegon-PPT GmbH)

14:40 Influence of Test Conditions on the Thermally Stimulated Current Characteristics of Silicone Rubber Used for Composite Insulators - Lijuan Gao (Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University)

14:40 Influence of Metallic Particle on Flashover Characteristics of Post Insulator in SF6 Under Negative DC Voltage - Can Guo (Xi'an Jiaotong University)

14:40 Flashover characteristics of metal particle contaminated GIS insulator under DC voltage

14:40 Chopper-Marx Circuit for Application to ILC: 1. Switching and Voltage Adding - Ryutaro Suzuki (Nagaoka University of Technology)

14:40 The reseaches on compact repetitive pulsed power system based on Marx generator - shirong hao (Key Laboratory of Pulsed Power, Institute of Fluid Physics, CAEP)

14:40 A Compact High Voltage Pulse Generator for Three Plasma Synthetic Jet Actuators Synchronous Discharge - Chengyan Ren (Institute of Electrical Engineering, Chinese Academy of Sciences)

14:40 Pressure rise calculation due to an internal arc fault in HV metal-enclosed SF6 GIS

14:40 A Repetitive Rate Pulse System Used in Lifetime Evaluation of High Voltage Ceramic Capacitors - Jiaqi Yan (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, China)

14:40 Screamer: An Optimized Pulsed-Power Circuit Analysis Tool
13:30 - 15:00
Room: Presidio
Contributions

13:30 The Anaysis of Time to Breakdown in Various Gas Insulation Systems - Emel Onal (Istanbul Technical University)

13:50 Influence of Impulse Waveform Parameters on the Breakdown Voltage in SF6 Highly Inhomogeneous Electric Field - Can Guo (Xi'an Jiaotong University) Tao Wen (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University)

14:10 DC Breakdown From Vacuum to Low Pressure in Dielectric-Loaded Systems* - Manuel Aldan (UC Berkeley)

14:30 Proposing Supercritical Fluids as a Replacement for SF6 in High–Voltage Circuit Breakers - Bert van Heesch (TUe)

14:40 Research on the arc of mixture using the confined space - qizheng ye (Huazhong University of Science and Technolog)

14:40 PD Pulse Sequence Studies with model transformer insulation in Mercaptans contaminated transformer oil - Ramachandra Balaiah (P.E.S. College of Engineering) sanjeev kumar (Sri Siddhartha Institute of Technology)

14:40 Influence of Electric Field Non-uniformity on Breakdown Characteristics in SF6/N2 Gas Mixtures Under Lightning Impulse - Can Guo (Xi'an Jiaotong University)

14:40 Influence of H2O on SF6 Discharge and Decomposition Characteristics Under Low Moisture Conditions - Kai LIU (Xi’an Jiaotong University)

14:40 Surface Flashover Properties of Polytetrafluoroethylene Modified by Ion Implantation in Vacuum - Dongdong Zhang (Institute of Electrical Engineering, Chinese Academy of Sciences)

14:40 Relationship between the Physicochemical Properties of Materials and the Fractal Dimension of Creeping Discharges Propagating at Solid/Fluid Interfaces - Abderrahmane Beroual (Ecole Centrale de Lyon, University of Lyon, Ampere Lab)

14:40 A coaxial ceramic vacuum insulator for a repetitive operated pulsed power source - Tao Xun (College of Opto-electric Science and Engineering, National University of Defense Technology, Changsha 410073, China)

14:40 Discussion on the Control Standards of Moisture Content in SF6 Electrical Equipment

14:40 Dielectric breakdown characteristics of the rod-plane electrode system in SF6 gas under oscillating impulse voltage - Junhao Li (Xi'an Jiaotong University)

14:40 Comparison of breakdown voltage of N2, CO2, SF6, N2-SF6 and CO2-SF6 mixtures: Seeking substitutes for SF6 for high voltage apparatus - Abderrahmane Beroual (Ecole Centrale de Lyon, University of Lyon, Ampere Lab)

14:40 Characteristics of Residual Surface Charge Distribution on Alumina under DC Voltage in Vacuum - Guan-Jun Zhang (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China)

14:45 Evaluation of Electrical Pulsing Strategy for Optimizing Cellular Inflows Through Electroporation by Nanosecond, High-Intensity Pulses - Qin Hu (Central Michigan University)
13:30 - 15:00
Room: Marina
Contributions

13:30 Study of the deterioration of conductive coatings used in form-wound motor coils by fretting wear tests - Fermin P Espino-Cortes (SEPI ESIME Zac IPN)

14:40 Study on Bubble Evolution in Oil-paper Insulation during Dynamic Rating of Power Transformers - Meng Gao (Xi'an Jiaotong University)

14:40 Multiple Voids Insulation System Response by Partial Discharge Analysis - Pietro Romano (Palermo University)

14:40 Liquid Dielectric Breakdown Studies using Compact Tesla Pulse Generator - Veda Prakash Gajula (Institute for Plasma Research)

14:40 The Effect of Partial Discharge on Electrical Life of Oil Immersed Paper - Yanjie Cui (Xi'an Jiaotong University)

14:40 Study of Nanosecond Electrical Breakdown in Perfluorinated Liquids at 140 kV - Ivan Punanov (Institute of Electrophysics UB RAS)

14:40 The influence of metal vapor deposition on the insulating materials

14:40 Effect of Electrode Composition on the Partial Discharge Characteristics of a Dielectric Elastomer Actuator System - Andrea Martinez (University at Buffalo, The State University of New York)

14:40 Effect of hydrostatic pressure on the impulse breakdown characteristics of transformer oil - Tonglei Wang (Xi'an Jiaotong University)

14:40 Space Charge Accumulation as a Contributor to Partial Discharge Activity in Dielectric Elastomer Actuators under High Voltage DC

14:40 Study on Impulse Breakdown Characteristics in Transformer Oil with Different Electrode Materials

14:40 Partial Discharges in Insulation Systems Subjected to Multilevel Converters - Marek Florkowski (ABB Corporate Research)

14:40 Partial discharge and endurance test technologies for insulation of inverter-fed motors using impulse voltages
15:00 Coffee Break
Coffee Break
15:00 - 15:30
Room: Grand Ballroom
15:30 Opening, Closing, and Solid State Switches
Opening, Closing, and Solid State Switches
15:30 - 17:30
Room: Ralston Ballroom
Contributions

15:30 High Current Switching Capabilities of a 3000 V SiC Thyristor for Fast Turn-on Applications - Jason Sanders (Transient Plasma Systems, Inc.)

15:45 High-Voltage SiC Thyristor Burst-Rate Switching - Heather O'Brien (US Army Research Laboratory)

16:00 LED-Triggered Photoconductive Semiconductor Switches for Nanosecond Pulse Generation - Wei REN (Old Dominion University)

16:15 Assessing the Role of Non-Local Trap-to-Band Impact Ionization in 4H-SiC Photoconductive Switches Containing Deep Defects Aimed at Enhanced Hold-off Voltages - Animesh Chowdhury (Texas Tech University)

16:45 High-voltage silicon avalanche diodes for picosecond range pulse-sharpening applications: towards optimal design - Pavel Rodin (Ioffe Institute)

17:00 Reversely Switched Dynistor: From Si to SiC - Lin Liang

17:15 Design and Test of the Trigger Vacuum Switch and its Trigger Source for the Oil Well Stimulation Device
High Voltage Design, Devices, Testing, and Diagnostics
High Voltage Design, Devices, Testing, and Diagnostics
15:30 - 17:30
Room: Gold Ballroom
Contributions

15:30 Power Evaluation of a Cree 1200 V 50A Si-C MOSFET using the Solid State Power Emulator - Richard Thomas (Army Research Laboratory)

16:00 High Voltage Capacitors Environmental Testing - Elena Bankowski (US Army TARDEC)

16:15 A Compact Faraday Cup for Nanosecond-Pulse Runaway Electron Beams - Cheng Zhang (Institute of Electrical Engineering, Chinese Academy of Science)

16:30 Miniature High Voltage, High Temperature Component Package Development - Lee Rashkin (Sandia National Laboratories)

16:45 Reserch of sweep frequency impedance criterion to determine transformer winding deformation - Fan Yang (State Key Laboratory of Electrical Insulation and Power Equipment)

17:00 Optimal design of a medium voltage high frequency transformer with a high isolation voltage (115kV) - Michael Jaritz

17:15 DESIGN CONSIDERATIONS FOR HIGHER ELECTRICAL POWER SYSTEM VOLTAGES IN AEROSPACE VEHICLES - Dan Schweickart (Air Force Research Laboratory-WPAFB)
19:00 Night out at the Giants Game!
Night out at the Giants Game!
19:00 - 22:20
Thursday 7 July 2016

07:30 Continental Breakfast
Continental Breakfast
07:30 - 08:15
Room: Grand Ballroom
08:15
08:15 - 09:30
Room: Ralston Ballroom
Contributions

08:15 Using High Voltage Nanosecond Pulses to Control Cell Functions and Treat Tumors - Richard Nuccitelli (Pulse Biosciences)
09:30 Break
Break
09:30 - 10:00
Room: Grand Ballroom
10:00 Biomedical Applications of Power Modulators
Biomedical Applications of Power Modulators
10:00 - 12:00
Room: Ralston Ballroom
Contributions

10:00 Physical and Biological Implications of Capacitive Coupling for Electric Pulse Treatments - Allen Garner (Purdue University)

10:45 Impact of platelet activation electric stimulation protocols on hematopoietic and mesenchymal stem cells - Jason Castle (GE Global Research)

11:15 Study of the cell viability and thermal effect under the high-frequency composite pulses - Chenguo Yao (Chongqing University) Yajun Zhao (Chongqing University)

11:30 Electric Pulse Manipulation of Cancer Cell Population Dynamics - Anand Vadlamani (Purdue University)

11:45 Measurement of electric field generated by high power burst pulse electromagnetic wave in water for using to application to bioelectrics - Yasushi Minamitani (Yamagata University)
Power Electronics and High Voltage
Power Electronics and High Voltage
10:00 - 12:00
Room: Gold Ballroom
Contributions

10:00 DEVELOPMENT OF 3 MW DUAL OUTPUT HIGH VOLTAGE POWER SUPPLY FOR IC RF SYSTEM - AMIT PATEL (ITER-India , Institute for Plasma Research)

10:15 High precision, low ripple 3kV capacitor charger for future linear colliders - Sebastian Blume (ETH Zürich)

10:30 HV Energy Dosing dc-to-dc Converter in PWM Mode - Alexander Pokryvailo (Spellman High Voltage Electronics Corp.)

10:45 FILTERING OF NOISES ASSOCIATED TO THE COMMUTATION OF THE DC RECTIFIERS IN PATTERNS φ, q, n OF PARTIAL DISCHARGES

11:00 Vibration and Audible Noise Analysis of Power Capacitors with Constrained Damping Structure - Jinyu Li (Xi'an Jiaotong University)

11:15 High power, high repetition rate, fast capacitor charging circuit - Andras Kuthi (University of Southern California)

11:45 The Distribution Of Lightning Striking Points On Aircraft Using The Leader Progress Method
12:00 Lunch Break
Lunch Break
12:00 - 13:30
13:30
13:30 - 15:00
Room: Twin Peaks
Contributions

13:30 High-Current Arc Discharge (HCAD) Test System for Aeronautic Power - Clay Nunnally (APELC)

13:50 Research on 10kV cascade pulse power supply for discharge applications - Tao Shao (Institute of Electrical Engineering, Chinese Academy of Science) chengyan ren

14:10 Experimental Study on Variations of Rabbit Tissue Impedance during Irreversible Electroporation Ablation - chenguo yao (chongqing university) shoulong dong (Chongqing University) yajun zhao (chongqing university)

14:30 Picosecond Pulse Delivery to Biological Tissue by a Dielectric Rod Antenna - Ross Petrella (Old Dominion University)

14:40 Fast Medium Voltage DC Solid-State Circuit Breaker - Michael Kempkes (Diversified Technologies, Inc.)

14:40 Tokamak Vertical Stability Coil Power Supply based on Modular Multilevel Converter - Inhwan Lee (University at Buffalo)

14:40 A Uniform Electric Field Producing Microfluidic Chip for Study and Analysis of Irreversible Electroporation - Lingyu Gong (Chongqing University)

14:40 A Control System for an Isolated LLC Resonant DC-DC Converter - Claudio Motta (University of Sao Paulo)

14:40 Analysis of Fault Characteristics of Converter in VSC-HVDC - Xiaoyun Sun (School of Communication and Information Engineering , Xi’an University of Science and Technology)

14:40 Experimental Study on Reverse Recovery Characteristics of High Power Thyristors in HVDC converter valve - Ke Yue (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China)

14:40 Electric Pulse Parameter Exploration for Lipid Extraction from Microalgae - Allen Garner (Purdue University)

14:40 15-Stage Compact Marx Generator Using 2N5551 Avalanche Transistors - Tom Huiskamp (Eindhoven University of Tehcnology)

14:40 Experimental study of a helical coil operating mechanism for future switchgear applications - Paul Gregor Nikolic (RWTH Aachen University)

14:40 Research on Calibration Method for Single High Pulse Voltage for Semiconductor Devices Test Instruments - CHONG LIU (008601064102268)

14:40 Optimized Small Scale Hydropower Generator Electrical System Design & Modeling Based on Real-Measurements - Adel El Shahat (Georgia Southern University)

14:40 A Comparison of Piezoelectric Transformer Technologies for HVDC Converter Applications - Peter Norgard (University of Missouri)

14:40 A ZCS AC/DC Converter with LCL - GE LI (Institute of Plasma physics, Chinese Academy of Sciences)

14:40 Fuzzy Logic Control of a Hybrid Energy Storage Module for Naval Pulsed Power Applications Using a Hardware-in-the-Loop Testbed - Isaac Cohen (University of Texas at Arlington)

14:40 Energy Storage Modeling Library (ESML) for DC NANO- GRID - Adel El Shahat (Georgia Southern University)

14:40 CHARGE-TRANSFER BASED SENSORLESS VOLTAGE FEEDBACK IN HV CAPACITOR CHARGERS - Argenis Bilbao (Texas Tech University) Michael Giesselmann (Texas Tech University)

14:40 Study of Effects of Nanosecond Pulsed Electric Fields on Cancer Cell by using in Vivo and ex vivo Assay. - Shun Ogura (Tokushima University)

14:40 Electric Pulse Manipulation of Stem Cell Proliferation and Differentiation

14:40 Down Hole Pulse Generator Must Survive 300 C at 9 km Depth: Low-cost Access to Ubiquitous Geothermal Heat Worldwide - William Leighty (The Leighty Foundation)

14:40 Nano-Grids: Future Power Grids – Concept and Review Paper - Adel El Shahat (Georgia Southern University)

14:40 Effect of the Number of Inner Wire Electrodes on Surfactant Treatment Using Nanosecond Pulsed Powers - Mitsuru Morimoto (Tokushima University)

14:40 Impact of Pulsed Power Loads on Advanced Aircraft Electric Power Systems with Hybrid Fuel-Cell/Battery APU - Hassan El-Kishky (The University of Texas at Tyler)

14:40 Special Purpose Power Electronics Converters for Nano-Grids & Smart Homes Applications - Adel El Shahat (Georgia Southern University)

14:40 Auto-Tuning Oscillator for the Generation of Nonthermal Plasma as a Therapeutic Treatment for Melanoma - Kyle Thompson (University at Buffalo)

14:40 Treatment of Aqueous Pollutant by a Discharge Plasma Reactor Using a Porous Membrane - Tomohiro Mori (Kindai University)

14:40 Investigation of Harmonic Distortion in Multi-Pulse Rectifiers for Large Capacitive Charging Applications - David Dodson (University of Texas at Arlington)

14:40 Evaluation of Rotational and Vibrational Temperature of Nanosecond Pulsed Surface Discharge on Water - Takahiro Sadamatsu (Nagasaki university)

14:40 Pulsed power as the main tool of energy-efficient non-thermal microbiological decontamination

14:40 Closed Transition Transfer Switch based on Multi-mode Photovoltaic Inverter for Preventing Power Outage - Sewan Heo (Electronics and Telecommunications Research Institute)

14:40 Development of high power burst pulse generator based on magnetic switch for bioelectrics application - Keita Yasu (Yamagata university)

14:40 Impact of Wind on Pollution Accumulation Rate on Outdoor Insulators Near Shoreline - Muhammad Majid Hussain (Glasgow Caledonian University)

14:40 Study on inducing apoptosis and stimulating the irreversible electroporation effect for tumor treatment based on high frequency nanosecond pulsed electric field

14:40 Thermal and Efficiency Study of a solid-state dual Marx generator combined a pulse transformer - Kefu Liu (Fudan University)

14:40 CONTINUOUS SWITCHING OF ULTRA-HIGH VOLTAGE SILICON CARBIDE MOSFETS

14:40 Effects of Algae on the Flashover Performance of Insulators Covered with RTV-Coating - Yawei Li (Electric Power Research Institute of State Grid Sichuan Electric Power Company)

14:40 Molecular Dynamics Based Assessment of Electric Pulse Enhancements of Cell Membrane Poration by Pressure Waves - Ze Zhang (Texas Tech University)

14:40 Research of Muscle Contraction and the Effects of Tissue Ablation in Vivo Exposed to High-Frequency Electric Fields - chenguo yao (chongqing university) shoulong dong (Chongqing University)

14:40 Effect of brine and temperature in sterilization using nanosecond pulsed electric field for packaged fresh foods - Koki Saito (Yamagata University)

14:40 Observation of Discharges in NOx Treatment Reactor Using Nanosecond Pulsed Powers and the Reactor Improvement - Kouji Omatsu (Tokushima University)

14:40 Electric Pulse Modification of Mammalian Cell Suspension Conductivity

14:40 Basic design and results of Regulated high voltage power supplies utilized for heating systems at IPR for SST-1 - C.B. Sumod Sumod (Institute for plasma research) Dipal Thakkar Dipal (Institute for plasma research) L.N. Gupta Laxminarayan (Institute for plasma research) Pareshkumar Pareshkumar (Institute for plasma research) U.K.Baruah Ujjwal (Institute for plasma research)

14:40 On the Circulating Current Control of a LCL Converter for Tokamak - Huarong Li (Institute of Plasma Physics Chinese Academy of Sciences)

14:40 Multi-Parameter Analysis in Single-cell Electroporation Based on the Finite Element Model - Chenguo Yao (Chongqing University) Hongmei Liu (Chongqing University)

14:40 Review and Recent Developments in DC Arc Fault Detection - Xiu Yao (University at Buffalo)
13:30 - 15:00
Room: Presidio
Contributions

13:30 Characterization of high voltage 4H-SiC IGBTs with wide epitaxial drift regions. - Miguel Hinojosa (Army Research Laboratory)

13:50 Pulse Series Generation Based on the Resistive Load of Neutron Source Type

14:10 Research on Transient Junction Temperature Rise of Pulse Thyristor - Jinchang Hu (Huazhong University of Science and Technology)

14:30 Evaluation of High Voltage SiC PiN Diode with Robust Field Edge Termination as an Opening Switch Device - Jason M. Sanders (Transient Plasma Systems) Stanislav Soloviev (GE Global Research)

14:40 Thyratron Replacement - Michael Kempkes (Diversified Technologies, Inc.)

14:40 A New soft Switch Circuit to improve the efficiency of a solid-state Marx generator - kefu Liu (Fudan University)

14:40 Novel GSSA Modeling of Switching Functions and Control of High Power Voltage Source Inverters (VSI) for Advanced Aircraft Electric Power Systems - Hadi Ebrahimi (The University of Texas at Tyler)

14:40 EFFECT OF CONDUCTIVE SCREENS ON THE STABILIZATION OF PLASMA CHANNELS WITH CURRENTS OF HUNDREDS kAmps - Dmitriy Bochkov (Pulsed Technologies ltd.) Victor Bochkov (Pulsed Technologies ltd.)

14:40 Investigation on discharge mechanism of a particle beam triggered gas switch - Tonglei Wang (Xi'an Jiaotong University)

14:40 THYRISTOR BASED SWITCHES TRIGGERED IN IMPACT-IONIZATION WAVE MODE - Anton Gusev (Institute of Electrophysics UB RAS)

14:40 A High-current, IGBT-based Static Switches for Energy Extraction in Superconducting Power Circuits - Knud Dahlerup-Petersen (CERN)

14:40 Test Results of a 7.5 kA Semi-Conductor Prototype Switch as Modular Switchgear in Energy Extraction Systems for the HL-LHC Magnet Test Bench Circuits - Gert Jan Coelingh (CERN)

14:40 Characteristics of GaAs PCSS Triggered by Laser Diode array

14:40 Delayed avalanche breakdown of high-voltage Si diodes: scenarios and mechanisms of picosecond-range switching - Pavel Rodin (Ioffe Institute, Russian Academy of Sciences)

14:40 Research on the Working Gas Pressure of Spark Gap Switch in High Power Laser System

14:40 An explosive pulsed power source based on ferroelectric generators and electrical exploding opening switches - youcheng wu (insititute of fluid physics)
13:30 - 15:00
Room: Marina
Contributions

13:30 A Modular 200kW-25kV DC Medium Frequency Resonant Converter for RF Power Amplifiers - Davide Aguglia (CERN) Xavier Abel Bonnin (CERN)

13:50 Design and Operation of Pulsed Power Systems Built to ESS Specifications - Michael Kempkes (Diversified Technologies, Inc.)

14:30 Bridge topology as primary switch for magnetic pulse compression circuit - Claus Strowitzki (Mlase AG)

14:40 Design of 40kV, 300us, 200Hz Solid-State Pulsed Power Modulator for Long Pulse Applications - Hong-Je Ryoo (Chung-Ang University)

14:40 Development of Compact High Voltage Power supply for -40kV Long Pulse - Hoon Heo (Pohang Accelerator Laboratory) SangHoon Nam (Pohang Accelerator Laboratory) SungChul Kim (Pohang Accelerator Laboratory)

14:40 Design and Initial Measurements of a 12.5 kV Prototype Inductive Adder for CLIC DR Kickers - Tony Fowler (CERN)

14:40 The design of a new explosive DC breaker using electromagnetic forming technology - tonghai ding (Huazhong university of science and technology)

14:40 SILVACO BASED ELECTRO-THERMAL ANALYSIS OF 4H-SiC TIV-JFET STRUCTURE UNDER EXTREMELY HIGH CURRENT DENSITY RESISTIVE SWITCHING - Bejoy Pushpakaran (Texas Tech University) Stephen Bayne (Texas Tech University)

14:40 Driving Circuitry with Active Voltage Clamping across IGBTs in a Marx Configuration - Martin Sack (Karlsruhe Institute of Technology)

14:40 Modeling and Experiment Research on Turn-off Characteristics of Pulse Power Thyristor - SHUYUN TIAN (HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY)

14:40 Design of High-voltage Nanosecond Fast Repetitive Pulse Generator Based on Avalanche Transistor

14:40 Evaluation of Long Term Reliability and Safe Operating Area of 15 kV SiC PiN Diodes during Ultra-High Current Pulsed Conditions - Emily Hirsch (Texas Tech University)

14:40 Simulation and Design Trade-Off Analysis of 15 kV SiC SGTO Thyristor during Extreme Pulsed Overcurrent Conditions - James Schrock (Texas Tech University)

14:40 Stacked Multi-Level Long Pulse Modulator Topology for ESS - Max Collins (Lund University)

14:45 The high voltage pulsed current supply based on Solid-state devices - Haozheng Shi (Fudan University) Kefu Liu (Fudan University) jian qiu (Fudan University)

14:45 Repetitive High Voltage Pulse Modulator Using Bipolar Marx Generator Combined with Pulse Transformer - Kefu Liu (Fudan University)
15:00 Break
Break
15:00 - 15:30
Room: Grand Ballroom
15:30 "Super" Invited Session
"Super" Invited Session
15:30 - 17:30
Room: Ralston Ballroom
Contributions

15:30 Space charge and its role in electric breakdown of solid insulation - George Chen (University of Southampton)
15:30 - 17:30
Room: Pacific Heights
Contributions

15:30 Using an Integrated Design Approach for the Compact Linear Collider (CLIC) Klystron Modulators - Davide Aguglia (CERN)

16:00 Particle Swarm Optimization Techniques for Pulsed Power Systems - A. Jensen (SLAC National Accelerator Lab)

16:30 (Moderated Discussion) Optimizing Power Converter Design at the (RF Power) System-Level
18:30 Banquet (times tentative)
Banquet (times tentative)
18:30 - 21:00
Room: Gold Ballroom
Friday 8 July 2016

07:00

07:00 - 08:00
Room: Sea Cliff

07:30 Continental Breakfast
Continental Breakfast
07:30 - 08:15
Room: Grand Ballroom
08:15
08:15 - 09:30
Room: Ralston Ballroom
Contributions

08:15 Pulsed power at Loughborough University - Bucur Novac (Loughborough University)
09:30 Break
Break
09:30 - 10:00
Room: Grand Ballroom
10:00 Dielectrics, Insulation, and Breakdown 2
Dielectrics, Insulation, and Breakdown 2
10:00 - 12:00
Room: Gold Ballroom
Contributions

10:00 Effect of High Voltage Impulses on Change of Partial Discharge Characteristics in oil-Impregnated Paper for Online Diagnostics - Roya Nikjoo (KTH Royal Institute of Technology)

10:15 The mechanism of SF6 decomposition characteristics Under Partial Discharge at Different Gas Pressures and Voltage - Kai Liu (Xi’an Jiaotong University)

10:30 Partial Discharges in Synthetic ester-pressboard Dielectric - THIRUMURUGAN C (IIT MANDI)

10:45 Investigation of model transformer insulation behavior during PD activity in Di-Benzo-Di-Sulfide Sulphur contaminated transformer oil using online tanδ measurement - Ramachandra Balaiah (P.E.S.College of Engineering) sanjeev kumar (Sri Siddhartha Institute of Technology)

11:00 Electron stimulated gas desorption of some dielectrics in vacuum - Guan-Jun Zhang (Xi'an Jiaotong University)

11:15 Ferrimagnetic Material Testbed for Coaxial Nonlinear Transmission Lines - Charlie Anderson (Scientific Applications and Research Associates, Inc.)

11:30 Stability Characteristics of Gas Filled Surge Arrester in Gamma and X Radiation Field - Koviljka Stankovic (University of Belgrade)

11:45 Experimental study on oil well stimulation by dynamic shock wave induced by liquid pulsed current discharge - Yi Liu (Huazhong University of Science and Technology)
High Power Microwaves
High Power Microwaves
10:00 - 12:00
Room: Ralston Ballroom
Contributions

10:00 Recent Experiments on the Recirculating Planar Magnetron* - N.M. Jordan (University of Michigan)

10:30 Development of a Compact Narrow-band High Power Microwave System - Rene Vezinet (CEA, DAM, GRAMAT, F-46500 Gramat)

10:45 DEVELOMPENT OF A PORTABLE, HIGH POWER MICROWAVE SYSTEM

11:00 Study of the Electric Field Screening Effect on Nine Carbon Fiber Field Emitters with Non-uniform Height - Wilkin Tang (Air Force Research Laboratory)

11:30 600 kV BIPOLAR OUTPUT TESLA-BLUMLEIN GENERATOR WITH FREQUENCY BANDWIDTH >1 GHz - Bucur Novac (Loughborough University)

11:45 Evaluation of Hybrid Bouncer Systems for High Precision Klystron Modulators - Xavier Abel Bonnin (CERN)
12:00 Lunch Break
Lunch Break
12:00 - 13:30
13:30
13:30 - 15:00
Room: Twin Peaks
Contributions

13:30 The Movement of Bubbles on High Repetition Discharges in Tap Water - takuma oikawa (Iwate university)

13:50 DEVELOPMENT OF HIGH-POWER GAS DISCHARGE AND ELECTRONIC VACUUM DEVICES FOR PULSED ELECTROPHYSIC. CURRENT STATUS AND PROSPECTS - Dmitriy Bochkov (Pulsed Technologies Ltd.) Victor Bochkov (Pulsed Technologies ltd)

14:10 GENERATION OF INTENSIVE DIRECTED CONTROLLED X-RAY RADIATION DURING CAVITATION OF FAST LIQUID STREAM

14:30 Nanosecond Pulse Discharges in an Inhomogeneous Electric Field in atmospheric air - Tao Shao (Institute of Electrical Engineering, Chinese Academy of Science)

14:40 Effect of Distance between Electrodes for Water Treatment by Plasma - Taichi Sugai (Nagaoka University of Technology)

14:40 The Effects of Lightning Discharges on Control & Communication Cables and Antenna Systems - Anıl Civil (Aselsan Inc.)

14:40 Study on the characteristics of the shock wave induced by underwater pulsed current discharge - ZhiYuan Li (Huazhong University of Science and Technology)

14:40 Research of Airflow Control Using Surface Dielectric Barrier Discharge Plasma at Atmosphere Pressure - Liang Yang (Dalian University of Technology)

14:40 Optical diagnostics of single-wire electrical explosion in vacuum - Huantong Shi (Tsinghua University)

14:40 Design of a Compulsator to drive a Railgun - Apurva Kulkarni (Indian Institute of Science, Bangalore)

14:40 Study of Accelerating Surface Charge Dissipation on Epoxy Treated by Dielectric Barrier Discharge - Tao Shao (Institute of Electrical Engineering, Chinese Academy of Science)

14:40 Experimental Investigation on Humidity Effects on the Variations of Positive DC Corona Discharge - Bian Xingming (North China Electric Power University) Tiebing Lu (North China Electric Power University)

14:40 Self-sustaining conditions for nanosecond pulsed volume discharges under airflows - Liqiu Wei

14:40 Introduction to non-magnetically confined fusion plasma torch-device. - Boris Gutman (State University of New York, Nassau Community College) Giovanni Villanova (Student, State University of New York, Nassau Community College) Nicholas Belluccia (Student, State University of New York, Nassau Community College)

14:40 Mode Transition in Microsecond-Pulse Gliding Discharges at Atmospheric Pressure - Cheng Zhang (Institute of Electrical Engineering, Chinese Academy of Science)

14:40 TANDEM FREE ELECTRON X-RAY LASER ON CHANNELING RELATIVISTIC PARTICLES - Mykhailo Vysotskyy (Kiev national Shevchenko univ, Kiev, Ukraine) Vladimir Vysotskii (Kiev national Shevchenko univ, Kiev, Ukraine)

14:40 Pre-ionization roles of upstream discharges for downstream discharges under airflows - Yongjie Ding

14:40 The characteristics of repetitive frequency discharge of Plasma Synthetic Jet Actuators - Chengyan Ren (Institute of Electrical Engineering, Chinese Academy of Sciences)

14:40 Electric Pulse Parameter and Electrode Geometry Impact on Plasma Formation - Allen L. Garner (Purdue University)

14:40 MODELING AND SIMULATION OF MULTIPACTOR DISCHARGE ON DIELECTRIC WINDOW UNDER HPM IN VACUUM - Bai-Peng Song (Xi'an Jiaotong University)

14:40 polytetrafluoroethylene films Surface treatment of atmospheric pressure three-dielectric-layer barrier discharge plasma driven by sub-microsecond repetitive pulses - Xi Li (China Academy of Engineering Physics)

14:40 Experiments about discharge in water with changing conductivity and applied voltages - Masatoshi Fue (iwate university)

14:40 Optical and Illuminant Characteristics of Nanosecond-Pulse Diffuse Discharges in a Point-to-point Gap - Cheng Zhang (Institute of Electrical Engineering, Chinese Academy of Science)

14:40 Computer Simulation Evaluation of an Electric Current Impulse generator

14:40 Improvement of Ozone Producing Coaxial Reactor by Tensioned Inner Wire Electrode in Using Nanosecond Pulsed Power - Tomohide Ikemoto (Tokushima University)

14:40 PLASMA-ASSISTED COMBUSTION TECHNOLOGY USING NANOSECOND PULSED POWER - Ryo Nakamura (Kumamoto University)

14:40 STUDY OF THE CORONA EFFECT : APPLICATION TO THE IONOCRAFT

14:40 Spatial resolved observation of repetitive nanosecond volume discharges under airflows - Tang Jingfeng

14:40 PIC/DSMC Simulation of Radiation Transport Dynamics in Helium Gas Discharges - Andrew Fierro (Sandia National Laboratories)

14:40 Research on 24MJ PFN for electromagnetic launch discharged in sequence - Chaoliang Jin (Huazhong University of Science and Technology)

14:40 SEPARATION PROCESS OF PLASTIC AND METAL FROM CD-R USING PULSED POWER - Tomohiko Yamashita (Guraduate School of Science and Technology, Kumamoto University)

14:40 Motion Behavior of Free Conducting Wire-type Particles in SF6 Gas under DC Voltage - YOU Haoyang (Xi’an Jiaotong University)

14:40 Spectral mapping of the corona discharge - Ganesh Avhad (IIT Bombay)

14:40 Effect of Solution Electric Conductivity on Surfactant Treatment Using Nanosecond Pulsed Powers - Kai Shimizu (Tokushima University)

14:40 Design of a 5.5MJ Charge Dump Power Supply for the PPPL FLARE Experiment - Paul Melnik (Woodruff Scientific Inc)

14:40 Effects of pulsed magnetic field on performances of semiconductor devices - Yang Yang (Hua zhong University of Technology and Science)

14:40 Design and Implementation of a Hierarchical Control System Architecture for a Modular Pulsed Power Supply System - Anıl Civil (Aselsan Inc.)

14:40 The development of three stage electromagnetic forming facility and its timing control system - Jianfeng Xie (Huazhong Univ. of Sci.&Technol.) Xiaotao Han (Huazhong Univ. of Sci.&Technol.)

14:40 Effects of increasing the repetition rate in nitrogen oxides treatment using pulsed discharge plasma - Takashi Ishikawa (Kindai University)

14:40 Behavior of Pulsed Streamer Discharges in Flowing Water - Masahiro Akiyama (Iwate University)

14:40 Coupled Thermal-Electrical Simulation Analysis for Carbon Fiber Composites Exposed to Lightning Current Impulse Based on Deleting Cell Process

14:40 Observation of Underwater Pulse Discharge and Influence of Deposited Energy on Shock Wave - Xiandong Li (Huazhong university of science and technology)

14:40 Generation and Characterization of a Pulsed Dense Plasma with Helium* - Thomas Manegold (Goethe University Frankfurt)

14:40 Quasi-Analytical Derivation of Parallel-Plate Multipactor Trajectories in the Presence of Higher-Order Mode Perturbations - Scott Rice (Michigan State University)

14:40 Analysis of Motion and Discharge of the Free Conducting Wire Particle in DC GIS - JIAN WANG (NCEPU)
13:30 - 15:00
Room: Presidio
Contributions

13:30 Measurement Uncertainty of Fast Pulse Voltages Measurements with Capacitive Divider - Koviljka Stankovic (University of Belgrade)

13:50 High Energy Density Power Supply Development at NSWCDD - Jordan Chaparro (NSWC Dahlgren)

14:10 Compact, Battery Powered Supply and Control Integration for HPRF Systems

14:30 High Voltage Radio Frequency Test Facility for the characterization of the dielectric strength in vacuum of RF drivers for Neutral Beam Injectors Ion Sources

14:40 Preprocessing method of online oil chromatographic data based on adaptive wavelet analysis - SUN Xiang (Electric Power Research Institute of State Grid Zhejiang Electric Power Corporation) Yiming ZHENG

14:40 High temperature carbon nanotubes (CNTs) based diode turn-on with a pulsed radio frequency signal

14:40 Study on Diagnosis of Power Transformer Winding Deformation through Vibration Signal - FAN ZHANG (Xi'an Jiaotong University) Yanjie Cui (Xi'an Jiaotong University)

14:40 A linear transformer driver based on capacitive coupling self-triggering mode - jian qiu (Fudan University)

14:40 High Voltage, Fast Kicker Power Supply - Timothy Ziemba (Eagle Harbor Technologies, Inc.)

14:40 Influence Factor on Sweep Frequency Impedance to Detect Winding Deformation within Power Transformer - Yang Fan (State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University)

14:40 Simulation of the transient overvoltage in HVDC scheme during the operation of MRTB

14:40 TO 50-YEAR ANNIVERSARY OF PULSE METHOD: FROM A STORM IMPULSE TO THE ONE-STAGE ON-LINE REGIME - Alexey Mytnikov (Tomsk Polytechnical University)

14:40 Thermal and Mechanical Analysis of Electromagnetic Loading on Stainless Steel Structures
13:30 - 15:00
Room: Marina
Contributions

13:30 Separation of Mixed PD UHF Signals in GIS by Using Cumulative Energy Function Feature Extraction - Xianjun Shao (Research Institute of State Grid Zhejiang Electric Power Company; State Key Lab of Electrical Insulation and Power Equipment, Xi’an Jiaotong University)

13:50 Partial Discharge under PWM stress-type Conditions - Pietro Romano (Palermo University)

14:10 MINIMUM-INTRUSIVE DIAGNOSIC SYSTEM FOR SF6 HIGH VOLTAGE SELFBLAST CIRCUIT BREAKER NOZZLES - Sebastian Wetzeler (RWTH Aachen, Institut for High Voltage Technology)

14:30 Partial Discharge Pattern Recognition Based Artificial Neural Network

14:40 Study of the Silicone Rubber Used at the External Insulation of High Voltage with Laser-induced Breakdown spectroscopy (LIBS) - XILIN WANG (Graduate School at Shenzhen, Tsinghua University)

14:40 A New Approach for Optimal Design of Corona Ring - Edson Guedes Costa (Federal University of Campina Grande)

14:40 Temperature investigation of electric arc discharges in medium-voltage switchgear - Tobin Knautz (Goethe-Universität Frankfurt)

14:40 The partial discharge inception and breakdown voltage distribution of metal protrusion in SF6 gas - Junhao Li (Prof.)

14:40 Advanced Method for Detection of Partial Discharge in Oil-paper insulated Transformer Bushings and Current Transformers - Yang Xu (Tsinghua University)

14:40 The impact of airborne particulate matter concentration on Negative DC ground synthetic electric field in spring season - Xingming Bian (North China Electric Power University)

14:40 Research on a New Type of Lightning Protection Device for Distribution Network Based on the Principle of Multi-Short-Gaps

14:40 Life Expectancy Determination of Form-wound Coil Isolation of High-voltage Motor - Koviljka Stankovic (University of Belgrade)

14:40 Lightning strike discharge simulation test research on shielding characteristic of lightning rod

14:40 Evaluation of Epoxy Coated Resistors in High Voltage DC Surge Environments

14:40 Influence of HVDC Converter Operation on Partial Discharge Characteristics - A. J. Reid (Glasgow Caledonian University) M. Azizian Fard (Glasgow Caledonian University)
15:00 Break
Break
15:00 - 15:30
Room: Grand Ballroom
15:30 Plasmas, Discharges, and Electromagnetic Phenomena
Plasmas, Discharges, and Electromagnetic Phenomena
15:30 - 17:35
Room: Ralston Ballroom
Contributions

15:30 Effects of temperature dependence of electrical and thermal conductivities on the heating of a one dimensional conductor - Foivos Antoulinakis (University of Michigan, Ann Arbor, MI 48109, USA)

15:45 Transient Electromagnetic Field Reconstruction from Sets of Non-Periodic Oscillations - William Feilner (Texas Tech University)

16:00 Electric field analysis of different compact electrodes for high voltage pulsed electric field applications in liquid food - RAMYA RAMASWAMY (BSAU)

16:15 Pulsed plasmas for two environmental applications: Power-to-Methane and pollution control - Bert van Heesch (TUe)

16:30 Improvement on the Ionization Rate of Hall Thruster with High Voltage - Yongjie Ding

16:45 Discharge properties of microsecond pulse driven Argon plasma jet arrays - Tao Shao (Institute of Electrical Engineering, Chinese Academy of Science)

17:15 Evolution of Partial Discharge of Oil-paper insulation under Long-term AC Voltage
Solid State Power Modulators, Components, and Systems
Solid State Power Modulators, Components, and Systems
15:30 - 17:30
Room: Gold Ballroom
Contributions

15:30 Tailoring High-Voltage, High-Current Thyristors for Very High Frequency Switching - Howard Sanders (Silicon Power Corporation)

15:45 An All Solid-State Inductively-Driven Radiation-Resistant Modulator For Fast-Kicker Magnet Applications - Christopher Yeckel (Stangenes Industries)

16:00 The Design and Testing of an Inductive Voltage Adder for ALS-U Kicker Magnets - William Waldron (Lawrence Berkeley National Laboratory)

16:15 SOLID-STATE MARX GENERATOR FOR CLIC BREAKDOWN STUDIES - Luis Redondo (Lisbon Engineering Superior Institute, Portugal)

16:45 PERFORMANCE ANALYSIS OF AN ALL SOLID STATE LINEAR TRANSFORMER DRIVER (LTD) - Landon Collier (Texas Tech University)

17:00 Analysing a gate-boosting circuit for fast switching - Martin Hochberg (Karlsruhe Institute of Technology)
Saturday 9 July 2016

08:00

08:00 - 12:30
Room: Sea Cliff

08:00 - 12:30
Room: Pacific Heights

13:00

13:00 - 17:00
Room: Regency Foyer

Choose timezone