27–29 Nov 2016
THE GREENERY RESORT KHAO YAI
Asia/Bangkok timezone

Effect of ZnO and TiO2 on Properties of Polystyrene/Nitrile Rubber Electrospun Fiber Mats

Not scheduled
15m
THE GREENERY RESORT KHAO YAI

THE GREENERY RESORT KHAO YAI

www.greeneryresort.com Nakhon Ratchasima, Thailand
Poster Nanomaterials & nanostructures

Speaker

Dr Poonsub threepopnatkul (Department of Materials Science and Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom 7300, Thailand)

Description

This research is aimed to study the effect of zinc oxide (ZnO) and titanium dioxide (TiO2) on mechanical and antibacterial properties of PS/NBR electrospun fibers. 15 wt% of polystyrene (PS) blended with nitrile rubber (NBR) at 50:50 w/w is dissolved in tetrahydrofuran prepared PS and NBR solution. ZnO and TiO2 are added into PS/NBR solution at 1.0, 2.0 and 3.0 wt%. The addition of 2.0 wt% of ZnO into PS/NBR electrospun fibers maximized Young's modulus and tensile strength. For the effect of TiO2, increasing content of TiO2 up to 1.0 wt% increased Young's modulus and tensile strength of PS/NBR electrospun fibers while addition of TiO2 beyond 1.0 wt% decreased the Young's modulus and tensile strength. The percentage strain at break is also decreased as the content of ZnO and TiO2 increased. Moreover the anti-bacterial properties, it found that the addition of 2.0 wt% ZnO the fibers inhibited the growth of E. coli and S. aureus.

Primary author

Dr Poonsub threepopnatkul (Department of Materials Science and Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom 7300, Thailand)

Presentation materials

There are no materials yet.