DT Training Seminars

Fibre Optic Sensors for distributed measurement of relative humidity

→ Europe/Zurich
32/1-A24 (CERN)

32/1-A24

CERN

40
Show room on map
Description

SPEAKERS: P. Petagna (introduction) and G.M. Berruti (talk)

ABSTRACT:

One of the problems left open after the initial run of the LHC experiments was the local measurement of the humidity levels in the innermost regions of the experiments. No sensor commercially available at the time was able to cope simultaneously with all the requirements of:

  • tolerance to high radiation levels
  • insensitivity to strong magnetic fields and electromagnetic noise
  • negligible impact in terms of size and mass
  • reliable reading over long distances with negligible impact in terms of additional services

This problem left unsolved a safety issue for the cold components of the detectors, and was therefore inserted in 2009 among the activities for the newly born DT Cooling Project.

Fibre Optics Sensors (FOS), progressively becoming an industrial standard for distributed measurements of strain and temperature over very long distances, seemed to provide the key enabling technology to solve the issue. A intense programme of R&D was launched to identify reliable and applicable methods of measuring humidity with FOS and to thoroughly characterize the obtained sensors. Today the world-first network of 72 thermo-hygrometers based on FOS is providing successful and continuous operation in CMS since more than two years. Based on a critical analysis of the performance and limitations of this first generation of sensors, the study of a second generation  (in several aspects complementary to the first one) has been launched. An operational installation of this second generation of FOS for humidity monitoring is targeted in both ATLAS and CMS for LS2.

The talk will review the rationale for the project, the methodology adopted and the obtained results. A critical account of the challenges remaining ahead will also be given.