PULse POwer for Kicker Systems (PULPOKS) workshop 2018

Session

Session 7 : Kicker Systems and Magnets Materials

13 Mar 2018, 13:45

6/2-004 (CERN)

Conveners

Session 7 : Kicker Systems and Magnets Materials

• Montse Pont (CELLS-ALBA)

22. NLK designed by Soleil and MAX-IV and recently installed at MAX-IV

Patrick Alexandre (Synchrotron SOLEIL)

13/03/2018, 13:45

"The Multipole Injection Kicker"

Transparent Top-Up injection in the next generation of storage rings (DLSRs), such as MAX-IV 3 GeV ring, is very challenging as dynamic apertures & available room shrink very quickly in the design of the lattices! One solution is to use a Non Linear Kicker to kick in the injected beam while not affecting the stored beam, using the non-linear behavior of the...

23. FAIR SIS-100 Kicker Systems

Sebastian Heberer (GSI)

13/03/2018, 14:10

26. Magnetic materials

Christopher Jensen

13/03/2018, 14:35

"Magnetic Materials"

Magnetic materials are used in many different pulse applications, from small pulse transformers to kicker magnets. The use of these materials in pulse application has some unique considerations. A short review of basic magnetic material concepts, some material fabrication background, and some pulse measurement techniques will be presented. Two examples with emphasis on...

27. Experience and procurement of ferrites and alternative materials

Laurent Sylvain Ducimetiere (CERN), Luis Miguel Coralejo Feliciano (CERN), Mike Barnes (CERN), Viliam Senaj (CERN), Wim Weterings (CERN)

13/03/2018, 15:30

Kicker magnets require dedicated magnetic material to achieve good field uniformity with fast rise and fall time. Historically CERN uses 8C11/CMD5005, NiZn, ferrite to accomplish this and recent procurement has shown increased difficulties in obtaining the required large cores, mainly due to the difficulty in machining to our strict tolerances. Nevertheless, other types of ferrite, with higher...