-
15:30
Field test results of self-calibrating cryogenic mass flow meter WEKASENSE
-
Miralem Okanovic
(WEKA AG)
-
15:31
Hybrid Positron Source for FCC-ee
-
Armen Apyan
(A.I. Alikhanyan National Science Laboratory (ANSL))
-
15:32
Update on study for anomalous top FCNC couplings at FCC-eh
-
Orhan Cakir
(Ankara University (TR))
-
15:33
Progress on Boron synthesis technique through precursor modification for introduction of artificial pinning centers in MgB2 wires
-
Gianmarco Bovone
(CNR - SPIN)
-
15:34
FCC-hh Nb3Sn wire development: superconducting and magnetic properties of prototype samples
-
15:35
FCC-hh Nb3Sn wire development: exploring the microstructure of prototype samples.
-
Alice Moros
(Technische Universität Wien)
-
15:36
Niobium Polishing for SRF applications
-
Pavlina Trubacova
(CERN)
-
15:37
Test rig for the experimental evaluation of turbo-compressor impeller designs for light gases
-
Maxime Pierre Podeur
-
15:38
Economic analysis of superconducting magnet production
-
Ferdinand Mayrhofer
(WU University)
-
15:39
Cooling of the refrigerant with chilled water before the inlet of the compressor
-
Fridolin Holdener
(shirokuma GmbH)
-
15:40
Update in deposition of Nb thick films on Cu for 6 GHz cavities
-
Vanessa Garcia
(LNL-INFN / Ferrara University)
-
15:41
HTS coated tapes in local magnetic field with gradients
-
Johannes Gnilsen
(Bruker HTS GmbH)
-
15:42
Progress with the Deposition of Niobium Nitride Thin Films on Copper
-
Stewart Bristow Leith
-
15:43
Superconducting thin films characterization at HZB with the Quadrupole Resonator
-
Dmitry Tikhonov
(Helmholtz-Zentrum Berlin)
-
15:44
Optimisation of a multi-stage turbocompressor architecture operating with a neon- helium gas mixture
-
Maxime Pierre Podeur
-
15:45
Fluid mixtures properties modeling
-
Jakub Tkaczuk
(CEA Grenoble)
-
15:46
Status and development of superconductive MgB2 wires and tapes
-
Mattia Donato
(ASG Superconductors SpA)
Matteo Tropeano
-
15:47
Mechanical characterization of large grain niobium sheets for high-velocity forming of SRF cavities
-
Jean-Francois Croteau
(I-Cube Research)
-
15:48
Triplet Track Trigger for Future Hadron Collider Experiments
-
Tamasi Kar
(Ruprecht Karls Universitaet Heidelberg (DE))
-
15:49
Study on aNTGCs from D8 operators for ZZ production at FCC-hh
-
İlkay Turk Cakir
(Giresun University )
Orhan Cakir
(Ankara University )
-
15:50
Comparison of the sensitivities to dimension-eight operators for anomalous neutral triple gauge couplings through pp→𝜈𝜈𝛾 process at HL/HE-LHC and FCC-hh
-
Haluk Denizli
(Bolu Abant Izzet Baysal University)
-
15:51
Single vector-like B-quark search in the B to tW decay channel at FCC-hh
-
Ilkay TURK CAKIR
(Giresun University)
Ismail Hakki SARPUN
(Akdeniz University)
-
15:52
The top quark pair cross section at the threshold at FCC-ee
-
Mathias Mancini
(Vrije Universiteit Brussel)
-
15:53
Mechanical validation of the support structure of the eRMC and RMM, the 16-T R&D magnets for the FCC
-
Manuel Francisco Garcia Perez
(CERN)
-
15:54
Bi-2212 wire development at CNR-SPIN: GDG process as valid Over Pressure alternative for future high field applications
-
Alessandro Leveratto
(CNR-SPIN)
-
15:55
Iron-based wires and tapes produced with simple and scalable methods
-
Marina Putti
(University of Genova)
-
15:56
A method for coil design of twin-aperture cos-theta superconducting dipoles based on extended sector model
-
Alessandro Maria Ricci
(Genova)
-
15:57
Performance Enhancement of Nb3Sn Superconductors by Artificial Pinning Centres
-
Stephan Pfeiffer
(Vienna University of Technology)
-
15:58
Test of HTS Demonstrator Coils at High Field and Variable Temperature in the SULTAN Facility
-
Xabier Sarasola
(EPFL)
-
15:59
Soldered and diffusion-bonded splices between Nb3Sn Rutherford cables for graded high-field accelerator magnets
-
Vincenzo D'Auria
(EPFL-SPC)
-
16:01
Industrialization of 16T Nb3Sn magnet production for HE-LHC and FCC
-
Ananda Chakraborti
(Tampere University (FI))
-
16:02
Strong-strong beam-beam simulation for multi-IP and multi-beam in circular colliders
-
kazuhito ohmi
(KEK)
-
16:03
Photodesorption and Photoelectron Yields from 150-nm Thin NEG Coatings
-
Yasunori Tanimoto
(KEK)
-
16:05
Influence of longitudinal impedance on beam-beam interaction
-
Yuan Zhang
-
16:06
Development of Distributed Tin method Nb3Sn wire for FCC
-
Shinya Kawashima
(KOBE STEEL, LTD.)
-
16:07
Ternary phase formation in the Nb-Cu-Sn system
-
Jonas Lachmann
(Institute of Materials Science, TU Bergakademie Freiberg)
-
16:08
OpenMARS Modelling Approach for Accelerator Availability Studies
-
Arto Niemi
(CERN)
-
16:09
JAI Student Project on scSPS
-
Leon Van Riesen-Haupt
(University of Oxford (GB))
-
16:10
Dynamic Pressure in the LHC - Influence of Ions Induced by Ionization of Residual Gas by Both the Proton Beam and the Electron Cloud
-
Suheyla Bilgen
(Centre National de la Recherche Scientifique (FR))
-
16:11
HTS REBaCuO coated conductors for the FCC-hh beam screen: Performance under photon irradiation at the ALBA Synchrotron Light Source
-
Patrick Krkotić
(ALBA)
-
16:12
Estimation and scaling laws of impedances and beam instabilities from LHC to FCC-hh
-
Daria Astapovych
(TU Darmstadt)
-
16:13
Current Flow Analysis of Tl-1223 Superconductors by Scanning Hall Probe Microscopy and TEM Investigations
-
Sigrid Holleis
(Atominstitut, TU Wien)
-
16:14
Coating the FCC-hh beam screen chamber with REBa2Cu3O7-x coated conductors
-
Joffre Gutierrez Royo
(ICMAB - CSIC)
-
16:15
Optimal beam dilution pattern of the FCC-hh ring using beating frequencies
-
Benedek Facskó
(Eötvös Loránd University)
-
16:17
Collective effect estimates for the FCC-ee pre-booster ring
-
Ozgur Etisken
(Ankara University (TR))
-
16:18
Studies of Internal Oxidation in ternary Nb3Sn at UNIGE
-
Carmine Senatore
(University of Geneva)
-
16:19
High Precision Timing and High Rate Detectors in Energy Frontiers
-
Yasar Onel
(University of Iowa (US))
-
16:20
Tile Multiple readout and beyond
-
Yasar Onel
(University of Iowa (US))
-
16:21
Considerations for large scale production of the FCC-hh beam screens
-
Cedric Garion
(CERN)