WOWCC development meeting

Europe/Zurich
Vidyo

Vidyo

Some things we discussed today:

Fabrication

Pierre reported on the fabrication of cavity frame and the horizontal trolley: all parts are ready, cavity frame plates need anodization done in the same way as or LHC cavity frames.

Alick has kindly agreed to provide information about LHC cavity frame anodization to Pierre

After anodization is done the inserts will be fixed into the plates and all parts for cavity frame goes to cleaning and then to assembly in B252

All part for trolley will be send by Pierre to B252 where Alban take it over for assembly.

Pierre presented the fabrication feedback from Marco about the preliminary design of the coating set up made by Tommi. There are many things to discuss. It was decided to make a dedicated meeting with Marco to discuss with more details and with the drawings. Pierre will organize the meeting, next Wed. July 1st.

Transport of Copper material:

Alick is taking care of transport and storage of copper material for WOWCC spare. Alexej will provide avalable info about material certificate.

Coating activity:

Fabio presented the status. Assembly of the 6-way cross mockup with 3 cathodes is ongoing. There are some issues with SS tube straightness.

Design:

Tommi presented the design of the frame for WOWCC full scale cathode assembly and storage. The height requirements for the building and crane are similar to the one we need for the coating setup. 

Alexej 25/06/2020

 

There are minutes attached to this event. Show them.