Name: CEC/ICMC 2023 Abstracts & Technical Program
Start: 2023-07-09T08:00:00-10:00
End: 2023-07-13T15:00:00-10:00
Location: Hawaii Convention Center

Monday 10 July 2023

07:00 Registration Open (7:00 am - 5:00 pm)
Registration Open (7:00 am - 5:00 pm)
07:00 - 07:30

07:30 Cryo Expo Open [9:00 am - 4:00 pm]
Cryo Expo Open [9:00 am - 4:00 pm]
07:30 - 08:00
Room: Cryo Expo Exhibit Hall, Level 1
08:00
08:00 - 08:50
Room: 316 ABC
Contributions

08:00 Opening

08:05 C1PL1-01: Airbus: A discussion about the use of cryogenic hydrogen for aviation propulsion - Amanda Simpson (Airbus Americas, Inc)
08:50 CEC Awards [8:50 am - 9:00 am]
CEC Awards [8:50 am - 9:00 am]
08:50 - 09:00
Room: 316 ABC

09:00 Traditional Hawaiian Blessing [9:00 am - 9:10 am]
Traditional Hawaiian Blessing [9:00 am - 9:10 am]
09:00 - 09:10
Room: 316 ABC
09:15
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1A-06: moved to C3Po1C-09

09:15 C1Po1A-02: Energy of Fluid (EOF) Simulation of Large-Scale Densification and Solidification of Hydrogen - Adam Swanger (NASA Kennedy Space Center)

09:15 C1Po1A-03: Enhanced cryogenic boiling heat transfer by surface coating of metal - Hojun Cha (Changwon National University)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1B-05: A novel lightweight cryogenic valve with minimized heat transfer - Marius Manea (STÖHR)

09:15 C1Po1B-04: Development of Conformable Cryogenic Valve Seats for Resilience to Foreign Object Debris - Michael Wood (Washington State University)

09:15 C1Po1B-02: A cryogenic test equipment of liquid hydrogen safety valve cooled by G-M cryocooler - Jia Guo (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C1Po1B-01: Design and Construction of a Stop Valve for 1.8K System - Haoying Qi (Technical Institute of Physics and Chemistry, CAS)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1C-06: The variable frequency driver upgrade for cryogenic system - Huang-Hsiu Tsai (NSRRC)

09:15 C1Po1C-04: Efficiency improvement of small cryogenic helium turbo-expanders in TIPC - Ming He (Technical Institute of Physics and Chemistry,CAS)

09:15 C1Po1C-05: Theoretical and Experimental study of High Speed tilting Pad Gas Bearings - Ming He (Technical Institute of Physics and Chemistry,CAS)

09:15 C1Po1C-03: The theoretical research on static and dynamic characteristics of orifice throttling hydrostatic thrust gas bearing of helium cryogenic turbine expander - Xiaohua Zhang

09:15 C1Po1C-02: The static and dynamic characteristics of hydrostatic journal gas bearing lubricated by hydrogen in cryogenic turbine expander in large hydrogen liquefier - Xiaohua Zhang

09:15 C1Po1C-01: Analysis and optimization on heat leakage structure of cold compressor in large-scale refrigeration system - Jinzhen Wang (Technical Institute of Physics and Chemistry, CAS)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1D-04: Integration of a new Cryogenic Liquefier into the IB-1 Cryogenic Test Facility - Maria Barba

09:15 C1Po1D-02: Commissioning results for the MITICA cryogenic plant project - Jean-Marc Bernhardt (Air Liquide)

09:15 C1Po1D-01: Commissioning of the cryogenic distribution system of the ESS superconducting linac - Philipp Arnold (European Spallation Source ERIC)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1E-01: Design of the Cryogenic Moderator System for the Second Target Station - Jim Janney

09:15 C1Po1E-06: Liquid Deuterium Cold Source Concept for the NIST Neutron Source - John Jurns (National Institute of Standards and Technology)

09:15 C1Po1E-05: Presentation of the commissioning and testing of the hydrogen cryostat of the cryogenic moderator system at the ZEA-1 (Forschungszentrum Jülich) for the European Spallation Source ESS - Eberhard Rosenthal (Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1))

09:15 C1Po1E-02: Preparing the Cryogenic Moderator System (CMS) at SNS for higher beam power - Matthew Howell (Oak Ridge National Laboratory)

09:15 C1Po1E-04: Development status of the in-situ measurement system for ortho-to-parahydrogen fractions for the ESS cryogenic moderator system - Hideki Tatsumoto (European Spallation Source)

09:15 C1Po1E-03: Spallation Neutron Source Reliability Improvement Projects for the Cryogenic Moderator System - Rocky Armstrong (ORNL)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C1Po1F-08: Cool-down logic for cryogenic distribution system of RAON SCL3 - Seojeong Kim (Institute for Basic Science)

09:15 C1Po1F-07: Control system based on EPICS for cryogenic distribution system of RAON SCL3 - Mijeong Park (Institute for Basic Science)

09:15 C1Po1F-06: Presentation of the ZEA-1 cryostat control and measurement system architecture - Eberhard Rosenthal (Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1))

09:15 C1Po1F-03: Design, Development and Commissioning of the Control System for the cryogenic distribution system at ESS - Emilio Asensi Conejero (European Spallation Source)

09:15 C1Po1F-02: Fermilab SSR1 and HB650 synoptic and EPICS Remote cryogenic control system - Liujin Pei (Fermi National Accelerator Laboratory)

09:15 C1Po1F-05: Numerical analysis of PID control for isothermal demagnetization at 100mK in a three-stage ADR - Ping Liu (1.Technical Institute of Physics and Chemistry, CAS 2.University of Chinese Academy of Sciences)

09:15 C1Po1F-04: Updating the Thermal Vacuum Chambers at the NASA Johnson Space Center - Cody Schaefer (NASA)
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
09:15 - 09:45
Room: Cryo Expo Exhibit Hall, Level 1
09:30
09:30 - 11:00
Room: Emalani Theater (320)
Contributions

09:30 J1Or1A-01: [Invited] Additive Manufacturing and hybrid materials in high power density machines for electric propulsion of vehicles - Olaf Rehme (Siemens AG)

10:00 J1Or1A-02: [Invited] Raytheon Technologies, Perspectives on Alternate Aviation Fuels - Parag Kshirsagar (Raytheon Technologies Research Center) Lance Smith (Raytheon Technologies Research Center)

10:30 J1Or1A-03: [Invited] Liquid Hydrogen Infrastructure and Applications - Maurice Dekker
09:30 - 10:45
Room: 318
Contributions

09:30 M1Or1A-01: Comparative study between 77 K, self-field Ic and that of in-field and 4.2 K based on high throughput reel-to-reel continuous Ic measurements on a PLD processed long REBCO coated conductor - Takanobu Kiss

09:45 M1Or1A-02: Advances in ultrafast transient liquid assisted growth of YBa2Cu3O7 coated conductors - Xavier Obradors (ICMAB-CSIC)

10:00 M1Or1A-03: Scanning Raman Spectroscopy for Characterization of REBCO Coated Conductors - Nathaly Andrea Castaneda Quintero (University of Houston)

10:15 M1Or1A-04: Jc measurement and current sharing in REBCO coated conductor with Ni stabilizer. - Yang Guo (The Ohio State University)

10:30 M1Or1A-05: Magnetization and flux creep analysis for STAR Coated Conductor cable - Shengchen Xue (Ohio state university)
09:30 - 11:00
Room: 323A
Contributions

09:30 M1Or1B-01: [Invited] Epitaxial growth and studies of dissimilar materials heterostructures by molecular beam epitaxy - Christopher Palmstrom (University of California, Santa Barbara)

10:00 M1Or1B-02: [Invited] Spin chirality driven magneto - transport in Mn3Sn and Co3Sn2S2 Kagome magnets - Ramesh Budhani (Morgan State University)

10:30 M1Or1B-03: [Invited] Real-space screening of bulk topology of high-quality two-dimensional insulators - Pallab Goswami (Northwestern University)
09:30 - 11:00
Room: 319B
Contributions

09:30 M1Or1C-01: High Heat Capacity Resin for Impregnation of Superconducting Magnets - Akihiro Kikuchi (National Institute for Materials Science)

09:45 M1Or1C-02: High-cycle Fatigue Strength of 22Cr-12Ni Austenitic Stainless Steel at 77 K - Muhammad Edgar Bratasena (Yokohama National University)

10:00 M1Or1C-03: Cryogenic properties of a nickel based alloy - Ke Han (National High Magnetic Field Lab, FSU)

10:15 M1Or1C-04: High purity aluminum in cryogenic motors for electric aircraft - Jin Kwon

10:30 M1Or1C-05: Cryoresistive aluminum-beryllium nanocomposites for aerospace electrical conductors - Chris Kovacs (Scintillating Solutions LLC)

10:45 M1Or1C-06: Minor titanium addition enables novel copper-tantalum composite microstructures - Karl Hartwig
11:00
11:00 - 12:15
Room: 314
Contributions

11:00 C1Or2A-01: Modelling and optimization of cryogenic mixed-refrigerant cycles for the cooling of superconducting power cables - Friederike Boehm (Karlsruhe Institute of Technology (KIT), Institute for Beam Physics and Technology (IBPT))

11:15 C1Or2A-02: Development of Brayton Circulating Cooling System - Santhosh Kumar Gandla (Sumitomo (SHI) Cryogenics of America Inc)

11:30 C1Or2A-03: Acoustic expanders for use in recuperative cryocoolers - Jacob Adams

11:45 C1Or2A-04: Withdrawn

12:00 C1Or2A-05: Withdrawn
11:00 - 12:15
Room: 315
Contributions

11:00 C1Or2B-01: Conservation of Helium while Maintaining High System Purity - Michael White

11:15 C1Or2B-02: Dynamic systems modeling of the Spallation Neutron Source Cryogenic Moderator System to optimize transient control and prepare for power upgrades - Nolan Goth (Nuclear Energy and Fuel Cycle Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA)

11:30 C1Or2B-03: Simulation of the cool-down process for the ESS cryogenic moderator system - Hideki Tatsumoto (European Spallation Source)

11:45 C1Or2B-04: Numerical modeling of the cool-down of the helium transfer-lines for FRIB Linac and experimental systems - Duncan Kroll (The Facility for Rare Isotope Beams)

12:00 C1Or2B-05: Dynamic simulation of DALS test facility cryoplant - Zheng Sun (Dalian Institute of Chemical Physics，CAS)
11:00 - 12:30
Room: 317
Contributions

11:00 C1Or2C-01: [Invited] Accelerator Magnet Development Based on COMB Technology with STAR® Wires* - Vadim Kashikhin (Fermi National Accelerator Laboratory)

11:30 C1Or2C-02: Thermal engineering of the Cryogenic Beam Position Monitors for the EIC Hadron Storage Ring - Frederic Micolon (BNL)

11:45 C1Or2C-03: Conduction cooled cryostat for small-scale superconducting radio frequency accelerator applications - Thomas Nicol (Fermilab)

12:00 C1Or2C-04: [Invited] Superconducting undulator development for synchrotrons and FELs - Kai Zhang (Zhangjiang Laboratory, Shanghai)
11:00 - 12:15
Room: 323B
Contributions

11:00 C1Or2D-01: Recent Computational Fluid Dynamics Modeling of Flow Boiling During Cryogenic Propellant Transfer in Terrestrial and Reduced Gravity - Jason Hartwig (NASA Glenn Research Center)

11:15 C1Or2D-02: Investigation and perspectives of using Graph Neural Networks to model complex systems: the simulation of the helium II bayonet heat exchanger in the LHC - Luigi Serio (CERN)

11:30 C1Or2D-03: Vapor-Liquid Interfaces of Cryogenic Fluids in Presence of Non-Condensable Gases: Insights from Molecular Simulations - Ashwin Ravichandran (KBR Inc., NASA Ames Research Center)

11:45 C1Or2D-04: Modeling of Cryogenic Heated-Tube Flow Boiling Experiments of Nitrogen and Methane with the Generalized Fluid System Simulation Program - Michael Baldwin (NASA NASA Marshall Space Flight Center)

12:00 C1Or2D-05: A numerical investigation on vapor-liquid equilibrium of mixed-refrigerants by solving the Rachford-Rice equation - Nir Tzabar (Ariel University)
11:00 - 12:30
Room: Emalani Theater (320)
Contributions

11:00 J1Or2B-01: [Invited] Decarbonizing ultra-class haul trucks and the mining ecosystem through utilization of liquid hydrogen - Jordan Raymond (First Mode)

11:30 J1Or2B-02: [Invited] The Benefits and Challenges with On-board Liquid Hydrogen Storage Systems - Kevin Simmons (Pacific Northwest National Laboratory)

12:00 J1Or2B-03: [Invited] Multi scale systematisation of damage and failure modes of cryogenic composite hydrogen vessels according to the Fault Tree method - David Schlegel (Technische Universität Dresden, Boysen-TU Dresden-Research Training Group)
11:00 - 12:25
Room: 319B
Contributions

11:00 M1Or2C-01: [Invited] Dielectric Strength under Shear Stress of Insulating Materials for Fusion Superconducting Magnet - Shigehiro Nishijima (Fukui University of Technology)

11:20 M1Or2C-02: Performance analysis of insulation materials for LH2 tanks - Hyeon-Jong Jeong (Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea)

11:35 M1Or2C-03: Cryogenic Thermal Performance of the Vacuum Insulation System for LH2 Storage Tanks - Yeon-Jae Jeong (Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea)

11:50 M1Or2C-04: [Invited] Thermal Conductivity and Mechanical Properties of Polymeric Aerogels for Cryogenic Insulation Applications - Gitogo Churu (LeTourneau University)

12:10 M1Or2C-05: Optimizing electric field enhancement of HTS cables - Peter Cheetham (FAMU-FSU College of Engineering)
11:00 - 12:00
Room: 323A
Contributions

11:00 M1Or2D-01: [Invited] Terahertz spectroscopy on topological superconductor thin films and heterostructures - Liang Wu (University of Pennsylvania)

11:30 M1Or2D-02: [Invited] Superconductivity beyond the Pauli limit tuned by locally enhanced Landé g-factor in Au(111)-superconductor heterostructures - Peng Wei
14:00
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C1Po2A-03: Experimental investigation of fast chill-down performance in cryogenic transfer lines using wire coil inserts - Minsub Jeong

14:00 C1Po2A-04: The Simulation and Experiments of A High Frequency Single Stage Pulse Tube Cryocooler with Two Cooled Sinks - Maowen Zheng (Technical Institute of Physics and Chemistry, CAS)

14:00 C1Po2A-02: Overview of GTL’s composite cryotank development - Zachary Taylor (Gloyer-Taylor Laboratories Inc.)

14:00 C1Po2A-01: Development of a cryogenic stepping motor using high-purity copper wire - Teruhito Iida (task, inc.)

14:00 C1Po2A-08: Using mylar-insulated cryopumping panels to improve vacuum level during warm temperature testing at JSC’s large thermal vacuum facilities - Kaixin Cui (NASA-Johnson Space Center)

14:00 C1Po2A-07: Dynamic Loading Capacity Test System of Thrust Gas Bearing of Cryogenic Turbo Expander - Xiaohua Zhang

14:00 C1Po2A-06: Development of a 35K single-stage coaxial pulse tube cryocooler - Yilin Lei (Technical Institute of Physics and Chemistry, Chinese Academy o)

14:00 C1Po2A-05: Design and Optimization of a High Frequency Miniature Pulse Tube Cryocooler - Maowen Zheng (Technical Institute of Physics and Chemistry, CAS)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C1Po2B-03: Development of non-flammable mixed refrigerant Joule-Thomson refrigerator for semiconductor etching process - Cheonkyu Lee (Korea Institute of Industrial Technology)

14:00 C1Po2B-02: Helium and Nitrogen Zero Boil-off System for Superconducting Magnets - Takuya Matsumoto (Japan Superconductor Technology,Inc.)

14:00 C1Po2B-01: Experimental study of the influence of cold head displacement on single-stage Gifford-McMahon cryocooler system performance - Stephen Dunn (Sumitomo (SHI) Cryogenics of America, Inc.)

14:00 C1Po2B-04: Thermal analysis and numerical simulation of 4 K J-T cryocooler equipped with an ejector - Yuwei Sun (Technical Institute of Physics and Chemistry CAS)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C1Po2C-04: Development of a dual flow transfer system with a centrifugal pump for liquid helium - Johannes Doll (TU Dresden)

14:00 C1Po2C-06: Numerical analysis of the performance of the inlet valve in a liquid hydrogen pump - Shaoqi Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C1Po2C-05: Performance modeling and test of an electrical induction motor at cryogenic temperature - Aaron Chick (Barber-Nichols, LLC)

14:00 C1Po2C-03: Theoretical power consumption analysis of pressurization process of reciprocating liquid hydrogen piston pump - Ming He (Technical Institute of Physics and Chemistry)

14:00 C1Po2C-01: Design of 10 L/s liquid hydrogen pump with integrated inducer and centrifugal impeller - Jinzhen Wang (Technical Institute of Physic and Chemistry, CAS)

14:00 C1Po2C-02: Influence of key parameters on the suction valve’s backflow volume in liquid hydrogen piston pump - Ming He (Technical Institute of Physics and Chemistry,CAS)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C1Po2D-08: Installation, commissioning, and testing of the HB650 CM at PIP2IT - Michael White

14:00 C1Po2D-07: Cryostat Design for an FEL SCU Demonstrator - Joel Fuerst (ANL)

14:00 C1Po2D-06: Mechanical and Process Design of the Interface to a 20,000 Liter Liquid Helium Dewar - Nusair Hasan (Michigan State University/ Facility for Rare Isotope Beams (FRIB))

14:00 C1Po2D-05: Cryogenic and safety design of the future High Field Cable Test Facility at Fermilab - Romain Bruce (Fermilab)

14:00 C1Po2D-02: Approach to achieving ‘Fast Cool-Down” for PIP-II High Beta SRF cavities during vertical tests at the UKRI-STFC Daresbury Laboratory - Shrikant Pattalwar (UKRI-STFC Daresbury Laboratory)

14:00 C1Po2D-01: Cryogenic infrastructure upgrade for crab cavities validation at TRIUMF - Alexey Koveshnikov (TRIUMF)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M1Po2A-04: Experimental and numerical study on thermoelastic properties of epoxy composites filled with zirconium tungstate powder at low temperatures - Yameng Zhang (Lanzhou University)

14:00 M1Po2A-01: Influence of surface structure of metal materials on radiation properties at cryogenic temperature - Yuchen Zhao (Technical Institute of Physics and Chemistry)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M1Po2B-07: Electronic structure and Auger electron spectroscopy (AES) measurements on cuprate oxide thin film heterostructures - Hom Kandel (University of Wisconsin-Parkside)

14:00 M1Po2B-05: A bi-layer barrier design for iron-based superconducting wires - Fang Wan (Fermi National Accelerator Lab)

14:00 M1Po2B-04: Oxidized structure and Compositional properties of 1144 phase FBS by analytical electron microscopy - Zuhawn Sung (Fermi National Accelerator Laboratory)

14:00 M1Po2B-03: Smooth wafer-scale superconducting MgB2 films with high kinetic inductance for high frequency superconducting devices - Jonathan Greenfield (Arizona State University)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M1Po2C-05: Serration Deformation Behavior of Stainless Steel and Medium Entropy Alloy at Ultra-Cryogenic Temperature - Soo Yeol Lee (Chungnam National University)

14:00 M1Po2C-04: Ceramic-Polymer Composite Coatings for Robust Anti-Frosting Surfaces - Youngsuk Nam (Korea Advanced Institute of Technology and Science)

14:00 M1Po2C-03: Fabrication and Performance Characterization of Electrospun Nanofibers for Terrestrial and Space Applications - Shankar Narayan (Rensselaer Polytechnic Institute)

14:00 M1Po2C-01: Magnetic, mechanical and thermal modeling of a conduction cooled superconducting whole body actively shielded 2T MgB2 open gradient magnet for proton therapy applications. - Milan Majoros
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M1Po2D-07: Using cryogenic milling for the recycling of multilayer packaging materials - Yi-Chieh Lai (Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology)

14:00 M1Po2D-04: Coefficient of Friction of Polymers in Liquid Nitrogen - Joshua Truchon

14:00 M1Po2D-03: Development of an apparatus and process for precision cryogenic thermal contraction measurements - James Tuttle (NASA)

14:00 M1Po2D-02: Mechanical properties measuring of low-dimensional samples at cryogenic - Haoying Qi (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
15:00 Afternoon Coffee Break -- sponsored by FAMU-FSU College of Engineering
Afternoon Coffee Break -- sponsored by FAMU-FSU College of Engineering
15:00 - 15:30
Room: Cryo Expo Exhibit Hall, Level 1
16:15
16:15 - 17:45
Room: 317
Contributions

16:15 C1Or3A-01: Performance Optimization of a 4K Hybrid JT Cooler for the HUBS Mission - Yuexue Ma (Technical Institute of Physics and Chemistry, CAS)

16:30 C1Or3A-02: Effect of working fluid on performance of a 4.5K JT cooler - Weibo Chen

16:45 C1Or3A-03: Further experimental work in mixed-gas Joule-Thomson cryocooling - Jennifer Detlor (UW-Madison)

17:00 C1Or3A-04: Performance of a single-stage mixed refrigerant miniature Joule-Thomson cryocooler operating at 90-100 K for space applications - Murthy V V S (Doctoral Candidate, Department of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai, Tamil Nadu, India - 600036)

17:15 C1Or3A-05: Development of thin-plate sorption compressor and miniaturized check valves for 5 K J- T cooler. - Junhyuk Bae (Korea Advanced Institute of Science and Technology (KAIST))

17:30 C1Or3A-06: Experimental Performance of a Modified Collins Cycle Cryocooler for In-space Applications - Carl Bunge (MIT)
16:15 - 18:00
Room: 315
Contributions

16:15 C1Or3B-01: LCLS-II Helium Refrigeration System: A comprehensive overview of the project - Dirk Pflueckhahn (SLAC)

16:30 C1Or3B-02: End Station Refrigerator 2 Cryoplant at JLAB - Christopher Perry (Thomas Jefferson National Accelerator Facility)

16:45 C1Or3B-03: Large-scale 4.5K helium refrigeration system for GSI FAIR - Philipp Treite (Linde Kryotechnik AG)

17:00 C1Or3B-04: Preliminary studies of the MINERVA cryogenic supply system - Daniel Berkowitz Zamora (SCK CEN)

17:15 C1Or3B-05: Experimental study on the temperature distribution characteristics of gas-liquid two-phase flow in the cold energy storage packed bed - Xiaoyu Fan (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)

17:30 C1Or3B-06: Design of nonflammable mixed refrigerants based on the partial molar enthalpy difference in mixed-refrigerant Joule-Thomson refrigerators with/no pre-cooling stage - Yunxiao Wang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences; University of Chinese Academy of Sciences)

17:45 C1Or3B-07: Influences of distributed J-T effect on the performance of mixed-refrigerant Joule-Thomson refrigeration cycle - Yuwei Sun (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)
16:15 - 17:15
Room: 314
Contributions

16:15 C1Or3C-01: [Invited] Simulation test platform for LH2 controlled storage/transfer - James Fesmire (GenH2 Corp.)

16:45 C1Or3C-02: Research on the matching supply of power and cold energy of liquid hydrogen cold chain logistics vehicles - Jin Zhen Wang (Technical Institute of Physics and Chemistry, CAS)

17:00 C1Or3C-03: Withdrawn
16:15 - 17:45
Room: 323B
Contributions

16:15 C1Or3D-01: [Invited] Cryogenic aspects of a 20 MW class superconducting generator for the Renewables industry - Wolfgang Stautner (GE Research)

16:45 C1Or3D-02: Novel modular PCS and decoupling control for SMES with coupling superconducting coil - Wenyong Guo (Beijing Jiaotong University)

17:00 C1Or3D-03: Withdrawn

17:15 C1Or3D-04: Design Considerations of SMES for Pulsed Power Applications - Ashish Bhardwaj (Los Alamos National Laboratory, FAMU-FSU College of Engineering, Center for Advanced Power Systems)

17:30 C1Or3D-05: Novel superconducting propulsor cooling method for All-Electric Aircraft - Wolfgang Stautner (General Electric Global Research)
16:15 - 17:55
Room: 319B
Contributions

16:15 M1Or3E-01: [Invited] Superconductors as Enabling Technology for Space Transportation - Matthieu Dalban-Canassy (Absolut System)

16:35 M1Or3E-02: [Invited] Space experiments using superconducting magnet technology - Frank Werfel (Adelwitz Technologiezentrum GmbH (ATZ))

16:55 M1Or3E-03: [Invited] Qualification and test of space compatible superconducting current leads (REBCO) designed for adiabatic demagnetization refrigerators - Jean-Marc Duval

17:15 M1Or3E-04: [Invited] Critical current stability of 2G REBCO tape for space-flight HTS leads - Ed Canavan

17:35 M1Or3E-05: [Invited] Design, fabrication and test of high temperature superconducting magnet for heat flux and radio blackout mitigation experiments in plasma wind tunnels - Sonja Schlachter (Karlsruhe Institute of Technology, Institute for Technical Physics)
16:15 - 18:00
Room: 318
Contributions

16:15 M1Or3F-01: Developing Advanced Nb3Sn conductors in Hyper Tech - Xuan Peng

16:30 M1Or3F-02: Persistent-current magnetization of APC Nb3Sn superconducting strands - Fang Wan (Fermi National Accelerator Lab)

16:45 M1Or3F-03: Nucleation and Growth of Oxide Nanoparticles in APC Nb3Sn - Jacob Rochester

17:00 M1Or3F-04: Nb3Sn conductors with high specific heat - Xingchen Xu (Fermi National Accelerator Lab)

17:15 M1Or3F-05: Filament area variation in Bi-2212 round wire and its impact on critical current - Eric Hellstrom (Applied Superconductivity Center - National High Magnetic Field Laboratory)

17:30 M1Or3F-06: High Ic Superconducting Joints Connecting Reinforced Bi2223 Tapes - Jun-ichi Shimoyama (Aoyama Gakuin University)

17:45 M1Or3F-07: Withdrawn
16:15 - 18:15
Room: Emalani Theater (320)
Contributions

16:15 M1Or3G-01: [Invited] Current Status of National Project for Electric Propulsion System Development of Aircraft using Superconducting Technologies - Masataka Iwakuma (Kyushu University) Teruo Izumi

16:35 M1Or3G-02: [Invited] Integrated Zero Emission Aviation (IZEA) using a robust hybrid architecture - Lance Cooley (ASC/NHMFL - Florida State University)

16:55 M1Or3G-03: [Invited] DC Superconducting Buses for Electric Aviation - Peter Cheetham (FAMU-FSU College of Engineering)

17:15 M1Or3G-04: [Invited] Liquid hydrogen storage and transfer-control system for integrated zero emission aviation (IZEA) - Parmit Singh Virdi (1)Mechanical Engineering Department, FAMU-FSU College of Engineering, Florida State University, Tallahassee, USA 2) National High Magnetic Field Laboratory, Tallahassee, USA)

17:30 M1Or3G-05: [Invited] Applications for additive materials in superconducting motors - Grant Lumsden (Victoria University Wellington)

17:45 M1Or3G-06: [Invited] New concept for cryogenic gaseous hydrogen-cooled lightweight electric engine - Martin Pohl (Technische Universität Dresden, Institute for Lightweight Engineering and Polymer Technology)

18:00 M1Or3G-07: [Invited] Fully Superconducting, Hydrogen-Cooled Motors for Electric Aircraft Propulsion - Joshua Feldman (University of Illinois at Urbana-Champaign)
16:15 - 18:15
Room: 323A
Contributions

16:15 M1Or3H: Panel Discussion
Tuesday 11 July 2023

07:00 Registration Open [7:00 am - 5:00 pm]
Registration Open [7:00 am - 5:00 pm]
07:00 - 07:30

07:30 Cryo Expo Open [9:00 am - 4:00 pm]
Cryo Expo Open [9:00 am - 4:00 pm]
07:30 - 08:00
Room: Cryo Expo Exhibit Hall, Level 1
08:00
08:00 - 08:45
Room: 316 ABC
Contributions

08:00 M2PL1-01: From high-temperature superconductivity to room-temperature superconductivity: From ambient pressure to very high pressure - C. W. Chu (Department of Physics and Texas Center for Superconductivity, University of Houston, Houston, Texas)
08:45 ICMC Awards [8:45 am - 9:00 am]
ICMC Awards [8:45 am - 9:00 am]
08:45 - 09:00
Room: 316 ABC
09:15
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1A-01: Optimal Leveraging of Gifford McMahon Cryocooler’s Regenerative Cooling Power for SNSPD Applications - Bernard Cooper (University of Glasgow, UK)

09:15 C2Po1A-04: Helium-3 Piping and Gas Handling Implementation for Colossus - Christopher James (Fermilab)

09:15 C2Po1A-03: Cryogenic plant integration for the Colossus milli-Kelvin platform at Fermilab - Greg Tatkowski (Fermi National Accelerator Laboratory)

09:15 C2Po1A-02: Technical solutions and efficiencies for large size dilution refrigerator precooling - Luc Gaffet (Air Liquide)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1B-10: Cryogenics design of a compact, cryocooler conduction-cooled SRF accelerator for e-beam production - Ram Dhuley (Fermi National Accelerator Laboratory)

09:15 C2Po1B-09: Investigation of Levitation Force for Attractive Magnetic Levitation Train using HTS Bulk - Kota Nakamura (Sophia University)

09:15 C2Po1B-06: Thermal simulation and analysis of a FEL SCU cryostat - Yuko Shiroyanagi (Argonne National Laboratory)

09:15 C2Po1B-05: A novel HTS dual-band bandpass filter using quadruple-mode resonator - Liang Sun (Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China)

09:15 C2Po1B-04: An HTS Multiplexer Based on Common-coupled Resonator - Liang Sun (Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1C-01: Thermodynamic and exergetic evaluation of CO2 liquefaction for ship transport - Maowen Zheng (Technical Insititute of Physics and Chemistry)

09:15 C2Po1C-08: Design of Muon Campus full flow purifier for varying operational conditions and horizontal shipping - Jeewan Subedi (Fermi National Accelerator Laboratory)

09:15 C2Po1C-07: Spallation Neutron Source Purifier Replacement Project for the Central Helium Liquefier - Percy Harrell (ORNL) Brian DeGraff (Oak Ridge National Laboratory - Spallation Neutron Source)

09:15 C2Po1C-05: Proposed Gas Refrigeration Cycles for Forced-Flow Cooling of High-Field Magnet Systems at 20 K - Ho-Myung Chang (Hong Ik University)

09:15 C2Po1C-09: Design and refurbishment of End Station Refrigerator 2 at JLab - Christopher Perry (Thomas Jefferson National Accelerator Facility)

09:15 C2Po1C-04: Compressed air supply system based on cryogenic energy storage - Junjie Wang (Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1D-02: Thermomechanical optimization of actively cooled thermal shield in PIP II Cryogenic Distribution System - Pawel Duda (Wroclaw University of Science and Technology)

09:15 C2Po1D-01: Experimental Study of Two-phase Transition cryogenic Cooling of Aluminum Conductors for Single Stator Slot Tests - Yang Guo (The ohio state university)

09:15 C2Po1D-06: Modeling of Condensation in the Presence of Noncondensables in GFSSP - Michael Baldwin (NASA MSFC)

09:15 C2Po1D-05: Grand canonical monte carlo simulation of helium adsorption in MOF-5 - Biao Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C2Po1D-04: Numerical simulation of gas-liquid two-phase flow in four-turn helium-based pulsating heat pipe - Rendong Guo (中国科学院理化技术研究所)

09:15 C2Po1D-03: Exergy Analysis and Improvement of Helium Internal Purifier - Ming He (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1E-10: The Study of Active Gas-gap Heat Switch Using Carbon Nanotubes as the Adsorption Material - Fangqiu Yu (Technical Institute of Physics and Chemistry, University of Chinese Academy of Sciences)

09:15 C2Po1E-09: Novel thermal switch design and performance test for the cryogenic devices - Zhiqiang Long (Siemens Heathinners)

09:15 C2Po1E-06: Influence of the heat exchanger form and phase change for zero boil off tank - Guopeng Wang (Technical Institute of Physics and Chemistry, CAS)

09:15 C2Po1E-03: Development of a metal 3D printed air foil heat sink for cryocoolers - Jaehwan Lee (Changwon National University)

09:15 C2Po1E-01: Numerical investigation on the performance of a new type of perforated-serrated fin for plate-fin heat exchanger in helium cryogenic system - Zhongyu Zou (1.Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences 2. University of Science and Technology of China)

09:15 C2Po1E-02: Numerical study of the heat transfer characteristics of recuperative heat exchangers under intermittent alternating flow - Ming He (Technical Institute of Physics and Chemistry, CAS)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C2Po1F-04: Leidenfrost dynamics of a LN2 droplet inside an immisible liquid pool - Srinivas Vanapalli (University of Twente)

09:15 C2Po1F-09: An innovative cryogenic system for cooling superconducting wind turbine electrical generators - Jean-Marc Bernhardt (Air Liquide advanced Technologies) Pascale Dauguet (Air Liquide advanced Technologies)

09:15 C2Po1F-07: Thermal conductivity measurements for additively manufactured AlSi10Mg and Al6061-RAM2 aluminum composites at cryogenic temperatures - Lauren Reising (Washington State University)

09:15 C2Po1F-08: High accuracy resistivity and temperature coefficient measurements of Invar from 4 to 300 K - Ben Hamilton (MIT) Jacob Adams (Massachusetts Institute of Technology)

09:15 C2Po1F-06: Experimental study on single-stage adiabatic demagnetization refrigerator (ADR) with Chromium Potassium Alum (CPA) - Yilin Lei (Technical Institute of Physics and Chemistry, Chinese Academy o)

09:15 C2Po1F-03: Development of a research cryostat for direct thermoacoustic cooling and conversion of hydrogen - Matthew Shenton (Washington State University)

09:15 C2Po1F-02: Design Improvements in Liquid Argon Purification Techniques in DUNE Cold Electronics Test Cryostat - Frederick James Schwartz Li (Fermi National Accelerator Lab. (US))

09:15 C2Po1F-01: Flow rate optimization for a small liquid argon system at Fermilab. - Sergey Koshelev (Fermi National Accelerator Laboratory)
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
09:15 - 09:45
Room: Cryo Expo Exhibit Hall, Level 1
09:30
09:30 - 10:50
Room: 319B
Contributions

09:30 M2Or1A-01: [Invited] High - strength austenitic stainless steels for fusion and accelerator magnet systems - Ignacio Aviles Santillana (CERN)

09:50 M2Or1A-02: Withdrawn

10:10 M2Or1A-03: [Invited] A comparison of high 4 K strength structural alloys, with consideration for the fatigue and fracture toughness properties - Robert Walsh

10:30 M2Or1A-04: [Invited] Development of large-scale TF structural XM-19 forgings for SPARC - Dina Yuryev (Commonwealth Fusion Systems)
09:30 - 11:00
Room: 318
Contributions

09:30 M2Or1B-01: [Invited] Combination of thermodynamic and pinning optimization routes for enhancing Jc - Masashi Miura (Seikei University)

10:00 M2Or1B-02: [Invited] Methods to enhance and tune vortex pinning in coated conductors - Leonardo Civale (Los Alamos National Laboratory (Retired))

10:20 M2Or1B-03: [Invited] Ca-repaired BaZrO3 nanorods/YBa2Cu3O7-x interface for enhanced pinning in YBa2Cu3O7-x nanocomposites with 2-8% BaZrO3 doping - Judy Wu

10:40 M2Or1B-04: [Invited] Understanding In-Field Performance of REBCO Conductor with Artificial Pinning Centers by Scanning Raman Spectroscopy and 2D-XRD - Goran Majkic (University of Houston)
09:30 - 10:30
Room: 323A
Contributions

09:30 M2Or1C-01: [Invited] Large Magneto-Electric Resistance in the Topological Dirac Semimetal Alpha-Sn - Mingzhong Wu (Colorado State University)

10:00 M2Or1C-02: [Invited] Magnetotransport Studies of Alpha-Sn and Topological Heterostructures - Owen Vail
09:30 - 11:00
Room: Emalani Theater (320)
Contributions

09:30 M2Or1D-01: [Invited] U.S. Department of Energy activities in liquid hydrogen infrastructure and storage - Zeric Hulvey (U.S. Department of Energy)

10:00 M2Or1D-02: [Invited] ARPA-E's topics in the areas of cryogenics energy sources and their applications - Xin Wu (ARPA-E)

10:30 M2Or1D-03: [Invited] Considerations for commercial adoption of cryogenic hydrogen for propulsion applications - James Fritz
11:00
11:00 - 12:30
Room: 314
Contributions

11:00 C2Or2A-01: An Efficient, Low-Vibration Reliquefier for NMR Spectroscopy Applications - Timothy Hanrahan (Bluefors Cryocooler Technologies, Inc.)

11:15 C2Or2A-02: 2K J-T cooler for quantum detection: emphasis on the Stirling-type pulse tube pre-cooler - Thomas Latella (Univ. Grenoble Alpes, CEA, IRIG-DSBT, 38000 Grenoble, France)

11:30 C2Or2A-03: Implementation and testing of a 100 mK ADR cryocooler backed by a 4He/3He sorption fridge for CMB-S4 project - Thibault Romand (Caltech / CEA)

11:45 C2Or2A-04: Thermodynamic analysis of gas-coupled GM/JT hybrid helium liquefaction systems - Xin Chen (Zhejiang University)

12:00 C2Or2A-05: Withdrawn

12:15 C2Or2A-06: A 4He sub-Kelvin adsorption refrigerator - Yilin Lei (Technical Institute of Physics and Chemistry)
11:00 - 12:00
Room: 315
Contributions

11:00 C2Or2B-01: Bio-LNG cooling of a high power density induction electromotor for electric aircraft propulsion - Milan Majoros

11:15 C2Or2B-02: Cooling method for the rotor of a superconducting motor - Alan Caughley (Callaghan Innovation)

11:30 C2Or2B-03: Development of additively manufactured cryogenic heat exchangers for hydrogen-electric aircraft propulsion - Marco Vietze (MT Aerospace)

11:45 C2Or2B-04: Withdrawn
11:00 - 12:45
Room: 323B
Contributions

11:00 C2Or2C-01: A Continuous Flow Boiling Curve in the Heating Configuration Based on New Cryogenic Universal Correlations - Jason Hartwig (NASA Glenn Research Center)

11:15 C2Or2C-02: Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down - Mariano Mercado (NASA Glenn Research Center)

11:30 C2Or2C-03: Validation of Universal Cryogenic Flow Boiling Correlations in Thermal Desktop for Liquid Helium - Erin Tesny (NASA Glenn Research Center)

11:45 C2Or2C-04: Modified 3-omega conductivity technique to allow measurements of thermal conductivity in fluids - Ben Hamilton (MIT)

12:00 C2Or2C-05: Critical Heat Flux of Liquid Hydrogen, Liquid Methane, and Liquid Oxygen: A Review of Available Data and Predictive Tools - Michael Baldwin (NASA MSFC)

12:15 C2Or2C-06: Generalization of pulse tube cooler characteristics from the aspects of thermodynamics, acoustics and fluid dynamics - Wei Dai (Technical Institute Of Physics and Chemistry, Chinese Academy of Sciences)

12:30 C2Or2C-07: Observation and analysis of the ultra-rapid cooling effect of cryoprotectant droplets on a sapphire surface - Wenxin Zhu (Shanghai Jiao Tong University)
11:00 - 12:20
Room: 318
Contributions

11:00 M2Or2E-01: [Invited] Progress Report on Mechanical Stress in High-Field REBCO Magnet - Jaemin Kim (Seoul National University)

11:20 M2Or2E-02: [Invited] Mechanical property evaluation of 2G HTS tapes at Fujikura - Kunihito Kikuchi (Fujikura Ltd.)

11:40 M2Or2E-03: [Invited] Electromagnetic and Mechanical Simulation of REBCO Pancake Coils Considering Screening Currents - So Noguchi (Hokkaido University)

12:00 M2Or2E-04: [Invited] Property Variations in Modern REBCO Coated Conductors from Multiple Manufacturers - Griffin Bradford (Applied Superconductivity Center)
11:00 - 12:30
Room: 323A
Contributions

11:00 M2Or2F-01: [Invited] Planar Josephson Junctions: From Topological Superconductivity to a Novel Switching Mechanism - Igor Zutic (University at Buffalo)

11:30 M2Or2F-02: [Invited] Josephson diode effect in Dirac semimetal Cd3As2 - Wei Pan (Sandia National Labs)

12:00 M2Or2F-03: [Invited] Magnetoelectric Coupling via Magnetic-Field-Induced Switching in Spin Crossover Complexes - Shalinee Chikara
11:00 - 12:30
Room: Emalani Theater (320)
Contributions

11:00 M2Or2G-01: [Invited] Cryogenic solutions to address net zero emissions targets - Ziad Melhem

11:30 M2Or2G-02: [Invited] New Zealand Government Initiatives in Clean Energy Innovation - Maile Giffin (Ministry of Business, Innovation and Employment)

11:50 M2Or2G-03: [Invited] Hyper Tech Perspectives on Cryo-fuels and the Impacts for Superconducting Wind Turbines and Electric Aircraft - Michael Tomsic (Hyper Tech Research Inc.)

12:10 M2Or2G-04: [Invited] Can process intensification of liquefaction technology for LNG and LH2 accelerate adoption for transportation use? - John Barclay (Pacific Northwest National Laboratory (USA))
14:00
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C2Po2A-01: Six years’ experience of the XFEL 2K operation - Tobias Schnautz (DESY)

14:00 C2Po2A-03: Pressure safety approach for the PIP-II Cryogenic Distribution System and cryomodules - William Soyars (Fermi National Accelerator Laboratory)

14:00 C2Po2A-02: Spallation Neutron Source Hydrogen Relief Analysis for the Cryogenic Moderator System - Nolan Goth (ORNL)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C2Po2B-09: Design and construction of 1,300 L zero-boil off (ZBO) liquid hydrogen storage tank - Jiho Park (Korea Institute of Machinery and Materials)

14:00 C2Po2B-03: Uncertainty analysis of Raman spectra for measuring ortho-parahydrogen compositions - Kyle Appel (Washington State University)

14:00 C2Po2B-10: Best Safety Practices in Liquid Hydrogen Infrastructure and Fueling - Wolfgang Stautner (GE Research)

14:00 C2Po2B-05: Tuning hydrogen boil off via inert gas insulation purge in a vapor cool shielded fuel tank - Yulia Gitter (Washington State University HYPER Lab)

14:00 C2Po2B-08: Cryostat for arbitrary ortho-parahydrogen reference mixtures - Sebastian Eisenhut (TU Dresden, Professur für Kälte-, Kryo- und Kompressorentechnik)

14:00 C2Po2B-02: Model establishment and process analysis of liquid hydrogen energy storage - Ming He (Technical Institute of Physics and Chemistry, CAS)

14:00 C2Po2B-07: Pressure and boil-off gas management of liquid hydrogen storage onboard maritime carriers for export - James Wang (Monash University)

14:00 C2Po2B-06: Study on the factors influencing the catalytic performance of Ortho-Para hydrogen catalysts - Ming He (Technical Institute of Physics and Chemistry,CAS)

14:00 C2Po2B-04: The design and development of the cryogenic compressed gas refueling system - Jinzhen Wang (Technical Institute of Physics and Chemistry CAS)

14:00 C2Po2B-01: Design and development of vehicle cryo-compressed hydrogen storage vessel - Ming He (Technical Institute of Physics and Chemistry, CAS)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C2Po2C-03: Design and performance of the JT component of dry dilution refrigerator - Maowen Zheng (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 C2Po2C-02: Design to Cryogenic System for Dilution Refrigerator with Cavity and Superconducting Magnet - Ki Woong Lee (Institution for Basic Science)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C2Po2D-01: Development of the Liquid Nitrogen Cooling system for Cryogenic Permanent-Magnet Undulator at NSRRC - Huang-Hsiu Tsai (NSRRC)

14:00 C2Po2D-03: Design of GRETA cooling systems - Li Wang (Lawrence Berkeley National Lab)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 C2Po2E-06: Co-simulation of cool down process from 300 to 80 K for ITER Tokamak - Akifumi Iwamoto (National Institute for Fusion Science)

14:00 C2Po2E-05: Dynamic simulation of CHL at SNS - Ryuji Maekawa (Oak Ridge National Laboratory)

14:00 C2Po2E-07: Simulation and optimization of reliquefication refrigerator for cryogenic liquid - Jinzhen Wang (Technical Institute of Physics and Chemistry, CAS)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M2Po2A-02: Design of a 40-MW-Class Electric Wire Interconnect System for Liquid-H2 Fuel-cell Aircraft Propulsion - Timothy Haugan (U.S. Air Force Research Laboratory)

14:00 M2Po2A-03: Impact of high-power semiconductor performance in cryogenic temperatures - Jin Kwon

14:00 M2Po2A-01: Magneto-structural phase transitions and two-dimensional spin waves in graphite - Timothy Haugan
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M2Po2B-07: A hierarchical delamination model for epoxy-impregnated REBCO superconducting pancake winding - Hanxiao Guo (Lanzhou University)

14:00 M2Po2B-04: Simulations for the fault current limiting operation of a long-length YBCO CORC® superconducting cable cooled by Helium gas - Linh Nguyen (Los Alamos National Laboratory, Los Alamos, NM 87544 USA.)

14:00 M2Po2B-06: A 3D/2D mixed-dimensional structural model and electro-mechanical phenomenological model for REBCO coated conductors - Peifeng Gao (Lanzhou University)

14:00 M2Po2B-05: CLIQ Quench Protection System for a MgB2 Segment Coil for MRI Applications - Xianhao Zhang (The Ohio State University)

14:00 M2Po2B-03: Magnetization, Flux Creep, and AC Loss in a Bi-2212 Conductor for Particle Accelerator Applications - Jacob Rochester

14:00 M2Po2B-02: Numerical study of the clamping system and mechanical stress amplitudes in powerline busbars of SIS100 synchrotron fast ramped superconducting magnets - Artur Iluk (Wrocław University of Science and Technology)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M2Po2C-05: Characterization of delamination behaviors in REBCO coated conductor tapes under transverse loading - Hyung-Seop Shin

14:00 M2Po2C-04: The design and analysis of a superconducting magnet system for high field MRI - Chao Zhou

14:00 M2Po2C-03: High Energy Density Solenoid SMES Designs for Air and Space Applications - Tom Bullard (UES, Inc.)

14:00 M2Po2C-02: Development and testing of a few-period, subsize coil for MgB2 Planar Undulator - Tushar Garg (The Ohio State University)

14:00 M2Po2C-01: Development of a new S-shaped Superconducting Hexapole for compact ECRIS - Shaoqing Wei (Institute of Plasma Physics (IPP), Chinese Academy of Sciences (CAS))
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M2Po2D-05: The Low-temperature Thermal Properties of Epoxy Resin Composites Enhanced by Graphene and Modified Alumina Hybrid Fillers - Yue Xiang

14:00 M2Po2D-04: Effect of annealing heat treatment on the low-temperature mechanical properties of high entropy alloy CoFeCrNiAl0.05Ti0.05 - Mingyue Jiang (Technical Institute of Physics and Chemistry， CAS)

14:00 M2Po2D-02: Mechanical Properties and Damage Development in Glass Fiber/Epoxy Laminates Subjected to Tensile Loading at Sub-zero Temperatures - Anna Krzak (Doctoral School, Silesian University of Technology)

14:00 M2Po2D-01: Characteristics of Laminates with Magnetic Properties for Motor Slot Wedges and Other Applications at Cryogenic Temperatures - Anna Krzak (Silesian University of Technology)
14:00 - 16:00
Room: Exhibit Hall III, Level 1
Contributions

14:00 M2Po2E-06: Heredity and physical properties in HTSC-thick films after processing HTSC-powders by method of the electromagnetic separation - Efim Broide (WeisScientific Ltd)

14:00 M2Po2E-05: Increased current density and pinning force in Ca - doped YBa2Cu3O7-δ / BaZrO3 multilayer thin films over a wide temperature range of 77K – 5K with an applied field of 0 – 9 Tesla - Timothy Haugan (U.S. Air Force Research Laboratory)

14:00 M2Po2E-04: The effect of Ca doped buffer layers on BaHfO3 doped YBa2Cu3O7-x composite multilayer superconducting films - Judy Wu (University of Kansas)
15:00 Afternoon Coffee Break -- sponsored by FAMU-FSU College of Engineering
Afternoon Coffee Break -- sponsored by FAMU-FSU College of Engineering
15:00 - 15:30
Room: Cryo Expo Exhibit Hall, Level 1
16:15
16:15 - 18:00
Room: 314
Contributions

16:15 C2Or3A-01: Rapid cooldown of cryostats using dynamic acoustic impedance matching in pulse tube refrigerators - Ryan Snodgrass (National Institute of Standards and Technology, Boulder, CO USA; University of Colorado Boulder, Boulder, CO USA)

16:30 C2Or3A-02: Cooling power analysis of a small scale 4 K pulse tube cryocooler driven by an oil-free low input power Helium compressor - Jack-Andre Schmidt (Justus-Liebig University Giessen, Germany)

16:45 C2Or3A-03: Development of a 5 W/4.2 K two-stage pulse tube cryocooler - Xihuan Hao (Bluefors Cryocooler Technologies, Inc.)

17:00 C2Or3A-04: High efficiency operation of a 4K-Gifford-McMahon cryocooler without rotary valve with a metal bellows compressor - Jens Höhne (Pressure Wave Systems GmbH)

17:15 C2Or3A-05: Performance Test of a Light-Weight Linear Stirling Cooler with Active Vibration Controller - Yibing Zhang (Lihan Cryogenics)

17:30 C2Or3A-06: Advances in Pulse Tube Cooler with Dual-opposed Ambient Displacers - Haibing Li (Lihan Cryogenics)

17:45 C2Or3A-07: Experimental optimization of GM cryocooler operating horizontally in liquid helium temperature zone - Wei Chao (Zhejiang University)
16:15 - 17:45
Room: 315
Contributions

16:15 C2Or3B-01: Small-Scale Industrial Hydrogen Liquefaction - Jong Baik (GenH2 Corp.) Pete Higgins (GenH2 Corp.)

16:30 C2Or3B-02: Development of an economic lab-scale hydrogen liquefier system - Hendrie Derking (Cryoworld BV) Srinivas Vanapalli (University of Twente, Applied Thermal Sciences group)

16:45 C2Or3B-03: Development and Demonstration of Mobile Hydrogen Liquefaction and Storage System - Jong Baik (GenH2 Corp.)

17:00 C2Or3B-04: Compact cryogenic hydrogen test environment for small devices and material characterization - Maximilian Grabowski (Technische Universität Dresden, Institute of Power Engineering, Bitzer-Chair of Refrigeration, Cryogenics and Compressor Technology Dresden, Germany)

17:15 C2Or3B-05: Ortho-parahydrogen catalyst test facility - Sebastian Eisenhut (TU Dresden, Professur für Kälte-, Kryo- und Kompressorentechnik)

17:30 C2Or3B-06: Magnetic field acceleration of catalyzed para- to orthohydrogen conversion - Liam Turner (Monash University)
16:15 - 18:00
Room: 323B
Contributions

16:15 C2Or3C-01: [Invited] Design, Configuration and Thermal Optimization of Advanced Cryostats - Quan-Sheng Shu (Retired Scientist)

16:45 C2Or3C-02: Development of a measurement system to measure in-situ the ortho/para concentration of liquid hydrogen - Yannick Beßler (Forschungsznetrum Juelich GmbH)

17:00 C2Or3C-03: Cryopump concept development for the cryogenic mirror region of the Einstein Telescope – the future gravitational wave observatory - Stefan Hanke (Karlsruhe Institute of Technology)

17:15 C2Or3C-04: Temperature-dependent quantum dot fluorescence spectra measurement based on a micro-machined Joule-Thomson cooler - Haiyue Pei (Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou 310024, Zhejiang Province, China)

17:30 C2Or3C-05: Cryogenic Modules for Synergistic O2 Generation and CO2 Retention in Closed-Circuit Escape Respirators - Adam Swanger (NASA Kennedy Space Center)

17:45 C2Or3C-06: Initiation and suppression of Taconis oscillations in tubes with junctions and variable-diameter tube segments - Konstantin Matveev (Washington State University)
16:15 - 17:45
Room: 317
Contributions

16:15 C2Or3D-01: Design considerations of the SPARC cryogenic system - Andrew Dalesandro (Commonwealth Fusion Systems)

16:30 C2Or3D-02: Overview and status of the PIP-II cryogenic system - Alexander Martinez

16:45 C2Or3D-03: Status of the MINERVA cryomodules and associated cryogenic system (MYRRHA phase 1) - Daniel Berkowitz Zamora (SCK CEN)

17:00 C2Or3D-04: NSLS-II cryogenic system problems and solutions - William Gash (NSLS-II at Brookhaven National Laboratory)

17:15 C2Or3D-05: Start-up of SLAC 2K cold compressors train - Pascale Dauguet (Air Liquide)

17:30 C2Or3D-06: Characterization of centrifugal compressors operating in FRIB’s sub-atmospheric compression system - Jonathon Howard (The Facility for Rare Isotope Beams)
16:15 - 17:55
Room: 318
Contributions

16:15 M2Or3H-01: [Invited] Compressive and tensile bending strains in REBCO tapes - Kozo Osamura

16:35 M2Or3H-02: Withdrawn

16:55 M2Or3H-03: [Invited] A report on the international round-robin test for electromechanical properties of HTS composite tapes by uniaxial tensile testing at liquid nitrogen temperature - Hyung-Seop Shin

17:15 M2Or3H-04: [Invited] Review on the investigations of uniaxial stress susceptibility of pre-over pressure reacted Bi-2212 round wires for fusion high-field magnet application - Dongliang Wang (Institute of Electrical Engineering, CAS)

17:35 M2Or3H-05: [Invited] Compressive bending property of BSCCO tapes - Shutaro Machiya (Daido university)
16:15 - 18:15
Room: 319B
Contributions

16:15 M2Or3I-01: [Invited] Status and challenges of accelerator sector conductor development - Lance Cooley

16:45 M2Or3I-02: [Invited] Sustainability and supply chain of superconductors - Kathleen Amm (Brookhaven National Lab)

17:15 M2Or3I-03: [Invited] Nb3Sn conductors with artificial pinning centers for high field accelerator magnets - Xingchen Xu (Fermi National Accelerator Lab)

17:45 M2Or3I-04: [Invited] Bi-2212 conductors and cables for accelerator magnets - Tengming Shen (Lawrence Berkeley National Laboratory)
16:15 - 18:15
Room: Emalani Theater (320)
Contributions

16:15 M2Or3J-01: [Invited] Rotating Machines for the Cryo-Electric Planes – Status and Development Issues - Swarn Kalsi (Kalsi Green Power Systems, LLC)

16:45 M2Or3J-02: [Invited] Cryogenic vacuum chamber testing of a conductively-cooled, high temperature superconducting rotor for a 1.4 MW electric machine for aeronautics applications - Justin Scheidler (NASA Glenn Research Center)

17:05 M2Or3J-03: [Invited] Tuned windings - the window of opportunity for the implementation of solid conductors in high frequency cryogenic electric machines - MIlan Majoros (Ohio State University) Michael Sumption (Ohio State University) CG Cantemir (CGC Ultramarin Ltd)

17:35 M2Or3J-04: [Invited] A Double Rotor Flux Switching Machine with High-Temperature-Superconductor Field Coils for Transportation Applications - Chris Kovacs (Scintillating Solutions LLC)

17:55 M2Or3J-05: [Invited] AC Loss in no-insulation ReBCO racetrack coils for high-dynamic applications - Herman Ten Kate (University of Twente)
16:15 - 17:45
Room: 323A
Contributions

16:15 M2Or3K-01: [Invited] Emergent Pseudogravity in Magnetic Weyl Semimetals - Matthew Gilbert

16:45 M2Or3K-02: [Invited] Berry Phase Enforced Spinor Pairing - Yi Li (Johns Hopkins University)

17:15 M2Or3K-03: [Invited] Diodic quantum materials - Liang Fu (MIT)
Wednesday 12 July 2023

07:00 Registration Open [7:00 am - 5:00 pm]
Registration Open [7:00 am - 5:00 pm]
07:00 - 07:30

07:30 Cryo Expo Open [9:00 am - 11:00 am]
Cryo Expo Open [9:00 am - 11:00 am]
07:30 - 08:00
Room: Cryo Expo Exhibit Hall, Level 1
08:00
08:00 - 08:45
Room: 316 ABC
Contributions

08:00 C3PL1-01: Overview of the fabrication of cryogenic hydrogen fuel ice layer for nuclear fusion ignition experiments - Suhas Bhandarkar (Lawrence Livermore National Lab)
08:45 Cryogenic Society of America (CSA) Awards & Cryogenics Best Paper Award [8:45 am - 9:00 am]
Cryogenic Society of America (CSA) Awards & Cryogenics Best Paper Award [8:45 am - 9:00 am]
08:45 - 09:00
Room: 316 ABC
09:15
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C3Po1A-06: Improving the precooling efficiency of the cryogenic compressed hydrogen with the temperature-distributed refrigeration method - Qiang Cao (Tongji University)

09:15 C3Po1A-05: Effect of a thermal fluctuation caused by a proton beam injection on the ESS large-scale 20 K helium refrigeration system - Hideki Tatsumoto (European Spallation Source)

09:15 C3Po1A-04: Reliability analysis of a 2500W@4.5K/500W@2K helium cryogenic refrigeration system - Wei Pan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1A-03: Cryogenic testing of molecular sieve materials for use in hydrogen liquefaction - Ian Richardson (Plug Power)

09:15 C3Po1A-01: The Study and Improvement of Pressure Degradation of Helium Cryogenic System at NSRRC - Huang-Hsiu Tsai (National Synchrotron Radiation Research Center)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C3Po1B-07: Upgrading the Helium Cryogenic Plant at NSLS-II - William Gash (Brookhaven National Laboratory)

09:15 C3Po1B-05: Study of operational modes of cool-down and warm-up processes for the ESS large-scale 20 K helium refrigeration system - Hideki Tatsumoto (European Spallation Source)

09:15 C3Po1B-08: Analysis of the PIPII cryoplant integrated operational modes - Joaquim Creus Prats (Fermi National Accelerator Laboratory)

09:15 C3Po1B-06: Development of a Portable Stand-Alone 20 K Brayton Cycle Helium Refrigeration System - Adam Swanger (2NASA Kennedy Space Center, Cryogenics Test Laboratory, KSC, FL 32899 USA) William Reaves (Bionetics LASSO, Kennedy Space Center, Cryogenics Test laboratory, KSC, FL 32899 USA)

09:15 C3Po1B-04: Development of an 18 kW@4.5 K & 4 kW@2 K Helium Refrigerator - Jin Zhen Wang (Technical Institute of Physics and Chemistry, CAS)

09:15 C3Po1B-03: Development of reverse-Brayton refrigeration system with scroll compressor package - Junseok Ko
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C3Po1C-09 (moved from C1Po1A-06): Thermal modeling of low temperature devices - Anil Erol (Northrop Grumman)

09:15 C3Po1C-08: Design and experiment of Inclined labyrinth seal for transferring cryogenic fluids to rotating superconducting machines - Yubin Kim (Changwon National University)

09:15 C3Po1C-06: Thermal conductivity of impregnation with ionic liquids for conduction cooled superconducting coil - Shogo Sonoda (Sophia University)

09:15 C3Po1C-07: High-gradient magnetic separation for wastewater treatment based on direct-conduction cooling superconducting magnets with large diameter, room temperature aperture - Xinran Shan (Technical Institute of Physics and Chemistry Chinese Academy of Sciences)

09:15 C3Po1C-04: The development and performance of superconducting magnetic separation water treatment technology - Xinran Shan (Technical Institute of Physics and Chemistry Chinese Academy of Sciences)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C3Po1D-08: A three-stage high-frequency pulse tube cryocooler obtaining a low temperature down to 2 K - Biao Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1D-04: Numerical study on two-stage Stirling cryocooler with a long second expansion space - Bokeum Kim (KAIST)

09:15 C3Po1D-07: Theoretical and experimental study of a three-stage Stirling-type pulse tube refrigerator below 10K - Chushu Fang

09:15 C3Po1D-06: Study on a 20 K two-stage thermally-coupled pulse tube cooler with independent ambient displacers - Yibing Zhang (Lihan Cryogenics)

09:15 C3Po1D-05: Study on the thermal coupling structure of cryogenic liquid ZBO storage system cooled by a high-frequency pulse tube cryocooler - Liubiao Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:15 C3Po1D-03: The investigation of a multi-bypass structure on the pulse tube refrigerator through the finite volume method - ZeKun Wang

09:15 C3Po1D-02: Study on heat transfer characteristics of regenerator under different Valensi numbers - Yu Fangqiu (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
09:15 - 11:00
Room: Exhibit Hall III, Level 1
Contributions

09:15 C3Po1E-02: Development of test rig for optical diagnostics of cryogenic spray. - Bhushan Patil (Department of Mechanical Engineering, University of Connecticut)

09:15 C3Po1E-04: A protocol for accurately calibrating thermocouples at cryogenic temperatures - Abhishek Purandare (University of Twente)

09:15 C3Po1E-01: Progress on the investigation of the delay in boiling of liquid nitrogen in a capillary channel - Rick Spijkers (University of Twente)
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
09:15 - 09:45
Room: Cryo Expo Exhibit Hall, Level 1
09:30
09:30 - 11:00
Room: 318
Contributions

09:30 M3Or1A-01: Cryogenic Hydrogen and testing methods: microstructural and mechanical properties under cryogenic hydrogen environment - Klaus-Peter Weiss (KIT ITEP)

09:45 M3Or1A-02: Investigating the applicability of existing mechanical test standards for fibre-reinforced polymer matrix composites at cryogenic temperatures - Nassos Spetsieris (National Physical Laboratory)

10:00 M3Or1A-03: Development of measurement tools and protocols for shear strength measurements of cryogenic epoxy interfaces - Aniket Ingrole (NHMFL)

10:15 M3Or1A-04: Design and Analysis of Wavelength-selective Nanofibers as Compact and Lightweight Thermal Coatings for Cryogen Applications in Deep Space Missions - Shankar Narayan (Rensselaer Polytechnic Institute)

10:30 M3Or1A-05: Cryogenic material testing with gaseous hydrogen for hydrogen-electric aircraft propulsion - Fabien Ebling (Fraunhofer Institute for Mechanics of Materials IWM)

10:45 M3Or1A-06: Dimensional stability of cryotreated diaphragms of pressure transducers - D.S. Nadig (Indian Institute of Science)
09:30 - 10:35
Room: 319B
Contributions

09:30 M3Or1B-01: [Invited] Study on Irradiation Effect of Insulating Materials for Fusion Superconducting Magnets: Temperature Dependence of Mechanical Strength - Yoko Akiyama (Osaka University)

09:50 M3Or1B-02: Development and performance qualification of two kinds of REBCO CICC for fusion - Huan Jin (Institute of Plasma Physics, Chinese Academy of Sciences)

10:05 M3Or1B-03: Radiation-Resistant Electrical Insulation for Superconducting Magnets - Mani Tripathi (UC Davis)

10:20 M3Or1B-04: FEM analysis of transient current sharing in REBCO coated conductor cables - Shengchen Xue (Ohio state university)
09:30 - 11:00
Room: Emalani Theater (320)
Contributions

09:30 M3Or1C-01: [Invited] Hydrogen generation, storage and utilisation in Australia: transition to a low emissions energy sector - Ian Mackinnon (Queensland University of Technology)

10:00 M3Or1C-02: [Invited] NASA Assessment of Liquid Hydrogen Aircraft Opportunities and Technologies - Michael Meyer (NASA Engineering and Safety Center) Wesley Johnson (NASA Glenn Research Center)

10:20 M3Or1C-03: [Invited] Benefits of Alternate Cryogenic Fuels for Logistics and Thermal Management of Aerospace Transportation - Timothy Haugan

10:40 M3Or1C-04: [Invited] Dual Hydrogen-Jet Fuel Aircraft –A path to low carbon emissions - Jeff Trudell
11:00
11:00 - 12:30
Room: 314
Contributions

11:00 C3Or2A-01: Transient Liquefaction on the Lunar or Martian Surface Operational Demonstration - Wesley Johnson (NASA Glenn Research Center)

11:15 C3Or2A-02: Thermal Modeling of CryoFILL liquefaction tests - Ali Kashani (ASRC Federal)

11:30 C3Or2A-03: A liquefaction model for a cryogenically refrigerated ellipsoidal tank - Ali Hedayat (NASA-MSFC)

11:45 C3Or2A-04: Benchmark performance metrics of a vane propellant management device for a 0.15 m3 liquid hydrogen tank - Kjell Westra (Hydrogen Properties for Energy Research (HYPER) Laboratory, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920 US)

12:00 C3Or2A-05: Onboard cryogenic propellant subcooler for launch vehicles using Joule-Thomson Device - Kiyoshi Kinefuchi (Nagoya University)

12:15 C3Or2A-06: Ground-based Cryogenic Leak Test of Fittings for Cryogenic Fluid Management - William Reaves (Cryogenics Test Laboratory, Kennedy Space Center)
11:00 - 12:15
Room: 315
Contributions

11:00 C3Or2B-01: [Invited] Assessment of Helium Management during Commissioning and Operations of MPEX Magnet System - Robert Duckworth

11:30 C3Or2B-02: A Retrospective on how Cryostats have changed with Cryostat Use and the Cooling Methods used to keep Superconducting Magnets and Devices Cold - Michael Green (Lawrence Berkeley Laboratory)

11:45 C3Or2B-03: Development of beyond state-of-the-art cryostat for the linear accelerator HELIAC of GSI - Hendrie Derking (Cryoworld BV) Marcel Keezer (Cryoworld BV)

12:00 C3Or2B-04: Reengineering the RHIC superconducting magnet current leads for EIC - Frederic Micolon (BNL)
11:00 - 12:00
Room: 323B
Contributions

11:00 C3Or2C-01: Results of a nitrogen-based pulsating heat pipe with varied configurations - Zhiyi Jiang

11:15 C3Or2C-02: Withdrawn

11:30 C3Or2C-03: Experimental results of long-distance helium pulsating heat pipes with varying adiabatic length, fill ratio, and applied heat load - Logan Kossel (University of Wisconsin - Madison)

11:45 C3Or2C-04: Neon pulsating heat pipe with innovative flexible evaporator to facilitate cryocooling of superconducting devices - Tisha Dixit (CEA Paris-Saclay, France)
11:00 - 12:00
Room: 317
Contributions

11:00 C3Or2D-01: Investigations on the throttling process of helium-3 in a cryogen-free dilution refrigerator - Shiguang Wu (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciencess)

11:15 C3Or2D-02: Design and optimization of the sintered heat exchanger in the cryogen-free dilution refrigerator - Yujia Zhai (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences)

11:30 C3Or2D-03: Investigation of helium gas-gap heat switch for the cryogen-free dilution refrigerator - Dirui Wu (Shanghai Institute of Technical Physics of the Chinese Academy of Sciences)

11:45 C3Or2D-04: Numerical Modelling of Thermoacoustic Stirling Engines & Refrigerators - Holly Butson (Auckland University of Technology, 55 Wellesley St E, Auckland 1010, New Zealand)
11:00 - 12:00
Room: 319B
Contributions

11:00 M3Or2D-01: Techno-economic Analysis of the Cryogenic Flux Capacitor Compared to Other forms of Hydrogen Production and Storage - Joshua Schmitt (Southwest Research Institute)

11:15 M3Or2D-02: Preliminary Experimental Studies into the Storage Capacity of Cryogenic Hydrogen in Aerogel Blanket Materials - Adam Swanger (NASA Kennedy Space Center)

11:30 M3Or2D-03: Macro and microscopic properties of 304 steel long-term exposed to liquid hydrogen - Klaus-Peter Weiss (KIT, Institute of Technical Physics)

11:45 M3Or2D-04: In situ observation of microcrack formation in carbon fibre reinforced composites under mechanical load at cryogenic temperatures. - Huw Edwards (University of Bristol)
11:00 - 12:10
Room: 318
Contributions

11:00 M3Or2F-01: [Invited] Cryogenic thermo-physical properties of additive manufactured materials - Klaus-Peter Weiss (KIT, Institute for Technical Physics)

11:20 M3Or2F-02: [Invited] Additive Manufacturing of Cryogenic Materials - Olaf Rehme (Siemens AG)

11:40 M3Or2F-03: Ultimate Tensile Strengths and Elastic Moduli of Additively Manufactured PA840-GSL, A6061-RAM2, and AlSi10Mg at 20K - Jacob Leachman

11:55 M3Or2F-04: Mechanical tensile testing of 3D-Printed Titanium 6Al-4V at Cryogenic Temperature - Bryan James (NASA Goddard Space Flight Center)
11:00 - 12:20
Room: Emalani Theater (320)
Contributions

11:00 M3Or2G-01: [Invited] Airplane motors employing superconducting DC field windings and conventional conductor AC windings - Rod Badcock (Victoria University of Wellington)

11:20 M3Or2G-02: [Invited] Ultrafast, Ultracompact Superconducting Series-Type Hybrid Circuit Breaker (SS-HCB) - Chris Rey (e2P)

11:40 M3Or2G-03: [Invited] Superconducting electric machines for electric propulsion –CHEETA motor, HEMM motor, and CRUISE motor, a comparison. - Thanatheepan Balachandran (Hinetics LLC)

12:00 M3Or2G-04: [Invited] - moved to Session M3Or4N
14:00
14:00 - 15:50
Room: 314
Contributions

14:00 C3Or3A-01: [Invited] Loss of insulation vacuum tests on an EuXFEL-like cryomodule - Aman Kumar Dhillon (Deutsches Elektronen-Synchrotron DESY)

14:20 C3Or3A-02: First results of the cryogenics operation for the LHC physics run 3 at the increased energy to 6.8 TeV - Laurent Delprat (CERN)

14:35 C3Or3A-03: The first cooldown of SCL3 cryogenic system - Sungwoon Yoon (Institute for basic science)

14:50 C3Or3A-04: [Invited] Commissioning of the ESS large-scale 20 K helium refrigeration system for the cryogenic moderator system - Hideki Tatsumoto (European Spallation Source)

15:20 C3Or3A-05: LCLS-II Helium Refrigeration System Commissioning Results - Viswanath Ravindranath (Stanford University)

15:35 C3Or3A-06: LCLS-II Linear Accelerator Cool-Down And Pump-Down - Viswanath Ravindranath (Stanford University)
14:00 - 15:45
Room: 315
Contributions

14:00 C3Or3B-01: LH2 testing of GTL's ultra-lightweight composite dewar-tank - Paul Gloyer (Gloyer-Taylor Laboratories Inc.)

14:15 C3Or3B-02: Filling ratio dependence of time variation of pressure inside liquid hydrogen tank - Minoru Takeda (Kobe University)

14:30 C3Or3B-03: Hydrogen Permeability Testing of Fibre Reinforced Thermoplastics under Cryogenic Conditions – Validation of a Test Rig Concept - Thomas Just (Technische Universität Dresden)

14:45 C3Or3B-04: Assessment of Insulation Systems for Aircraft Liquid Hydrogen Tanks - Wesley Johnson (NASA Glenn Research Center)

15:00 C3Or3B-05: Effects of throttle and heater input for reducing pressure surging in a liquid hydrogen tank pressurizer - Yulia Gitter (Washington State University HYPER Lab)

15:15 C3Or3B-06: Experimental and numerical investigations on depressurization process in a large liquefied hydrogen tank - Takehiro Himeno (The University of Tokyo)

15:30 C3Or3B-07: Withdrawn
14:00 - 15:30
Room: 323B
Contributions

14:00 C3Or3C-01: Withdrawn

14:15 C3Or3C-02: In-situ, high-spatial resolution temperature measurement of liquid oxygen tank under liquefaction via fiber optics sensing system - Hon Chan

14:30 C3Or3C-03: LCLS-II Cryogenic System Instrumentation - Dayne Robinson

14:45 C3Or3C-04: LCLS-II Helium Refrigeration System Automation - Dayne Robinson

15:00 C3Or3C-05: Capacitance based measurement of volume fraction, velocity, and mass flow rate of cryogenic nitrogen 2-phase flow - Qussai Marashdeh (Tech4Imaging, LLC)

15:15 C3Or3C-06: Research on measurement characteristics and structure optimization of U-tube Coriolis mass flowmeter with liquid hydrogen - Xiangxiang Pei (Institute of Refrigeration and Cryogenics, Zhejiang University)
14:00 - 15:15
Room: 317
Contributions

14:00 C3Or3D-01: Einstein Telescope PathFinder Cooling System Architecture and Design - Arvi Xhahi (Nikhef / University of Twente)

14:15 C3Or3D-02: Low-noise thermal shielding around the cryogenic payloads in the Einstein Telescope - Lennard Busch (Karlsruhe Institute of Technology (KIT))

14:30 C3Or3D-03: Conceptual cryostat design for cryogenic payload suspension studies for the Einstein Telescope - Xhesika Koroveshi (Karlsruhe Institute of Technology (KIT))

14:45 C3Or3D-04: SPHEREx payload thermal architecture and analysis - Bradley Moore (Jet Propulsion Laboratory, California Institute of Technology)

15:00 C3Or3D-05: Thermal design of the High-Volatiles and Minerals Moon Mapper (HVM3) Instrument on the Lunar Trailblazer Mission (LTB) - Ian McKinley (Jet Propulsion Laboratory, California Institute of Technology)
14:00 - 16:00
Room: 319B
Contributions

14:00 M3Or3H-01: Introduction - Shreyas Balachandran (Thomas Jefferson National Accelerator Facility)

14:10 M3Or3H-02: [Invited] The critical current and critical current density of MgB2 ultrafine superconducting wires and cables - Akihiro Kikuchi (National Institute for Materials Science) Hiroaki Kumakura (National Institute for Materials Science)

14:25 M3Or3H-03: [Invited] Development of MgB2 superconductor wires, cables, coils and their applications - Xuan Peng

14:40 M3Or3H-04: [Invited] Electro-magnetic tape width of REBCO coated conductors characterized by reel-to-reel scanning Hall-probe magnetic microscopy - Takanobu Kiss

14:55 M3Or3H-05: [Invited] Resistivity Measurements of Electric Conductors for High Power Machines and Magnets for a Full Range of Cryogenic Temperatures and Magnetic Fields - Thomas Bullard (UES, Inc.)

15:10 M3Or3H-06: [Invited] Database of VSM In-Field Performance of REBCO Coated Conductor at 4.2-77 K, 0-14 T - Goran Majkic

15:25 M3Or3H-07: [Invited] Fabrication and transport properties of multifilament Cu/Ag/Ba-122 iron-based superconducting wires - Dongliang Wang (Institute of Electrical Engineering, CAS)

15:40 M3Or3H-08: Discussion
14:00 - 16:00
Room: 323A
Contributions

14:00 M3Or3I-01: [Invited] Applications of superconducting circuits using hybrid graphene Josephson junctions - Jonathan Prance

14:30 M3Or3I-02: [Invited] Functional Amortization of Cryocooling - Anna Leese de Escobar (Laconic Infrastructure Partners)

15:00 M3Or3I-03: [Invited] Recent material developments for superconducting quantum circuits - Valentino Seferai

15:30 M3Or3I-04: [Invited] Cryogenics for Superconducting Quantum Technologies - Ziad Melhem (Oxford Quantum Solutions)
14:00 - 16:00
Room: 318
Contributions

14:00 M3Or3J-01: [Invited] Dual Flux Pinning Mechanisms and the Effect of Microstructure on Pinning and Critical Current in APC Nb3Sn - Jacob Rochester

14:20 M3Or3J-02: [Invited] APC Nb3Sn conductors: opportunities and challenges - Xingchen Xu (Fermi National Accelerator Lab)

14:40 M3Or3J-03: [Invited] Critical current hysteresis and flux pinning in 7 core Cu/Ag/(Ba, K)Fe2As2 tapes - Satoshi Awaji (Tohoku University)

15:00 M3Or3J-04: [Invited] Overview of the effect of ion irradiation in cuprate and iron-based superconductors - Toshinori Ozaki (Kwansei Gakuin University)

15:20 M3Or3J-05: [Invited] Flux pinning performance of FeSe0.5Te0.5 thin films modified by low-energy ion irradiation - Toshinori Ozaki (Kwansei Gakuin University)

15:40 M3Or3J-06: [Invited] Effect of metamaterial engineering on the superconductive properties of ultrathin layers of NbTiN - Michael Osofsky (Towson University)
14:00 - 15:00
Room: Emalani Theater (320)
Contributions

14:00 M3Or3K-01: [Invited] Withdrawn

14:20 M3Or3K-02: [Invited] Thermodynamic Modeling of Gaseous Hydrogen Filling from Fueling Station to Fuel Cell Electric Vehicle -Lessons of Gaseous Hydrogen Fueling and Possibility and Expectation of Liquid Hydrogen Use- - Taichi Kuroki (National Renewable Energy Laboratory)

14:40 M3Or3K-03: [Invited] US Navy Developments in Large-Scale Superconducting Applications - Peter Ferrara (Naval Surface Warfare Center, Philadelphia Division)
15:00
15:00 - 16:00
Room: Emalani Theater (320)
Contributions

15:00 M3Or3L: Panel Discussion
16:15
16:15 - 17:00
Room: 314
Contributions

16:15 C3Or4A-01: Hermetic wall material optimization on a heat switch used for ADR application - Jin Hai (Tsinghua University)

16:30 C3Or4A-02: A vanadium superconducting heat switch for very low temperatures - Chloe Gunderson (University of Wisconsin-Madison)

16:45 C3Or4A-03: Finding a low temperature leak - Michael DiPirro
16:15 - 17:30
Room: 315
Contributions

16:15 C3Or4B-01: Nitrogen Precooling Heat Exchanger replacement and control system upgrade in Superfluid Cryoplant at CMTF - Jeewan Subedi (Fermi National Accelerator Laboratory)

16:30 C3Or4B-02: Withdrawn

16:45 C3Or4B-03: A high effective meso-scale helical-tube-bundle recuperator spanning from 300 K to 30 K - John Pfotenhauer

17:00 C3Or4B-04: Withdrawn

17:15 C3Or4B-05: Discussions of real gas effects on the regenerative refrigerators - Qiang Cao (Tongji University)
16:15 - 18:30
Room: 317
Contributions

16:15 C3Or4C-01: ITER Complex Cryolines installation System – Features, challenges and status - Lahcene Benkheira

16:30 C3Or4C-02: The final design and manufacturing of cryogenic valve boxes for ITER - Christina Weber (RI Research Instruments GmbH)

16:45 C3Or4C-03: ITER Roughing Pump System Cryogenic System Overview - Ainsley Hart (Oak Ridge National Laboratory) Sarah Smith (ORNL)

17:00 C3Or4C-04: Methodology of designing a support system for cryogenic pipelines in multi-channel vacuum insulated transfer lines - Michał Stanclik (Wroclaw University of Science and Technology)

17:15 C3Or4C-05: Cryogenic Distribution System for Polish Free Electron Laser Facility - Maciej Chorowski (Wroclaw University of Science and Technology)

17:30 C3Or4C-06: Current status of main distribution box for Korean heavy ion accelerator, RAON - Junghyun Yoo (Institute for Basic Science)

17:45 C3Or4C-07: Cryogenic Distribution System for SIS100 at FAIR@GSI - Maurice Dekker (DEMACO HOLLAND B.V.)

18:00 C3Or4C-08: Overview and status of the Long-Baseline Neutrino Facility Far Detectors cryogenics system - David Montanari (Fermi National Accelerator Lab. (US))

18:15 C3Or4C-09: Withdrawn
16:15 - 18:15
Room: 323B
Contributions

16:15 C3Or4D-01: [Invited] Tipping Point flight demonstration - United Launch Alliance - John Reed (ULA)

16:45 C3Or4D-02: [Invited] Orbital Cryogenic Storage and Transfer Demonstration Using LOXSAT - William Notardonato (Eta Space)

17:15 C3Or4D-03: [Invited] NASA Cryogenic Fluid Management Flight Demonstration Summary: Lockheed Martin 2020 Tipping Point - Wesley Johnson (NASA Glenn Research Center)

17:45 C3Or4D-04: [Invited] NASA Cryogenic Fluid Management Flight Demonstration Summary: SpaceX 2020 Tipping Point - Sean Kenny (NASA Marshall Space Flight Center)
16:15 - 18:15
Room: 319B
Contributions

16:15 M3Or4M-01: Introduction - Shreyas Balachandran (Thomas Jefferson National Accelerator Facility)

16:25 M3Or4M-02: [Invited] Strength of Pure Al at Cryogenic Temperatures - Karl Hartwig

16:40 M3Or4M-03: [Invited] Resistivity ratios for high purity aluminum in magnetic fields - Jin Kwon

16:55 M3Or4M-04: [Invited] Tensile properties and deformation behavior at low temperatures in ferrite and austenite duplex stainless steel with various grain sizes - Norimitsu Koga (Kanazawa University)

17:10 M3Or4M-05: [Invited] Strength and Fracture Toughness of Type 304 and 316 Austenitic Stainless Steels at 4.2 K - Yoshinori Ono (National Institute for Materials Science)

17:25 M3Or4M-06: [Invited] Three-point bending experiment of epoxy resin and glass fiber reinforced composites by Fiber Bragg Gratings - Di Jiang

17:40 M3Or4M-07: Discussion
16:15 - 18:05
Room: Emalani Theater (320)
Contributions

16:15 M3Or4N-01: [Invited] HTS Devices and Related Cryogenic Systems for Electric Aircraft and Ships - Sastry Pamidi

16:35 M3Or4N-02: [Invited] Cryoresistive and superconductive aerospace main power transmission cables - Chris Kovacs (Scintillating Solutions LLC)

16:55 M3Or4N-03: [Invited] GaN HEMT and Air Core Magnetics based Power Converters Evaluations at Cryogenic Temperature - H. Alan Mantooth (University of Arkansas)

17:25 M3Or4N-04: [Invited] LTspice modeling for GaN-GIT HEMT including cryogenic temperature - H. Alan Mantooth (University of Arkansas)

17:45 M3Or4N-05: [Invited] Development and Impacts of a Superconducting Power Cable in a 110kV Distribution Network - Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology)
16:15 - 17:45
Room: 318
Contributions

16:15 M3Or4O-01: [Invited] High critical current REBCO tapes by Advanced MOCVD - Venkat Selvamanickam (University of Houston)

16:45 M3Or4O-02: [Invited] Numerical evaluation on angular dependence of Jc in REBCO coated conductors due to spherical pins and columnar pins - Tatsunori Okada (Tohoku University)

17:05 M3Or4O-03: [Invited] Non-linear electrical transport on superconducting thin films in pulsed magnetic fields - Christopher Mizzi (Los Alamos National Laboratory)

17:25 M3Or4O-04: [Invited] Historical Progress of Artificial Pinning Center Additions in (Y,RE)BaCuO Coated Conductors - Timothy Haugan (U.S. Air Force Research Laboratory)
16:15 - 18:15
Room: 323A
Contributions

16:15 M3Or4P-01: [Invited] AC Loss simulation and system-wide analysis on a Single-Phase 6.5 MVA HTS Traction Transformer for Chinese High-Speed Trains - Zhenan Jiang (Victoria University of Wellington)

16:45 M3Or4P-02: AC Loss of Metallic and Superconductor Electric Wires at high B*dB/dt Measured by Calorimetric Method for High Power Density Rotating Machines - Timothy Haugan (U.S. Air Force Research Laboratory)

17:00 M3Or4P-03: Accuracy comparison of screening current modelings of REBCO pancake coils - So Noguchi (Hokkaido University)

17:15 M3Or4P-04: Understanding and Minimizing AC losses in CORC cables of YBCO superconducting tapes - Linh Nguyen (Los Alamos National Laboratory, Los Alamos, NM 87544 USA.)

17:30 M3Or4P-05: Magnetization ac losses, magnetization measurement, and creep analysis of Ni-plated Roebel Cable for particle accelerator applications - Shengchen Xue (Ohio state university)

17:45 M3Or4P-06: FEM analysis of Magnetization AC loss in REBCO coated conductor tape and helical wound tape conductors - Tushar Garg (The Ohio State University)

18:00 M3Or4P-07: AC Losses and Surprising Magnet Heating in Reciprocating Active Magnetic Regenerative Refrigerators - Corey Archipley (Pacific Northwest National Lab (USA))
19:00 Farewell Event - "Aloha, A Hui Hou"
Farewell Event - "Aloha, A Hui Hou"
19:00 - 21:00
Room: Level 3, 316ABC
Thursday 13 July 2023
08:00
08:00 - 08:45
Room: 316 ABC
Contributions

08:00 M4PL1: Electric Aircraft: Solving the Key Materials and Engineering Challenges to Manufacture a Complete Electrical Propulsion System - Rod Badcock (Victoria University of Wellington)
08:45
08:45 - 09:30
Room: 316 ABC
Contributions

08:45 J4PL1: Cryogenic infrastructure for 400 qubits and beyond - Nicholas Masluk (IBM)
09:30 ICMC Awards & Closing [9:30 am - 9:45 am]
ICMC Awards & Closing [9:30 am - 9:45 am]
09:30 - 09:45
Room: 316 ABC

09:45 Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
Morning Coffee Break -- sponsored by FAMU-FSU College of Engineering
09:45 - 10:00
Room: Center Concourse, Level 3
10:00
10:00 - 11:00
Room: 323B
Contributions

10:00 C4Or1A-01: Characterization of thermal properties of OFHC copper at cryogenic temperature - Jared Valois (University of Wisconsin-Madison)

10:15 C4Or1A-02: Study of the thermal physical properties of insulating materials in a Titan environment - Richard Ottens (NASA/GSFC)

10:30 C4Or1A-03: Optimization of thermoelectric generator power density for cryogen cold exergy recovery - Maciej Chorowski (Department of Cryogenics and Aerospace Engineering, Wroclaw University of Science and Technology, Poland)

10:45 C4Or1A-04: Ice lithography integrated with a micromachined Joule-Thomson cooler - Limin Qi (Westlake University)
10:00 - 11:00
Room: 315
Contributions

10:00 C4Or1B-01: Overview of ITER Cryoplant construction and integration phases - Lahcene Benkheira (ITER Organization)

10:15 C4Or1B-02: Comparison of liquefaction testing with liquid nitrogen and liquid oxygen - Ryan Grotenrath (NASA Glenn Research Center)

10:30 C4Or1B-03: Two new Helium Refrigerators for the LHC accelerator upgrade (HL-LHC) at CERN; from Concept to Tender - Emmanuel Monneret (CERN)

10:45 C4Or1B-04: Process Design for FRIB’s Experimental System Cold Box - Nusair Hasan (Michigan State University (MSU) - Facility for Rare Isotope Beams (FRIB))
10:00 - 11:15
Room: 317
Contributions

10:00 C4Or1C-01: Model Based Exploration of Physical Parameters for Liquid Hydrogen System Insulation Performance - Clément Louriou (Airbus)

10:15 C4Or1C-02: Impact of Internal Baffle Designs on Liquid Hydrogen Sloshing in Cryogenic Aircraft Fuel Tanks - Wolfgang Stautner (General Electric Global Research)

10:30 C4Or1C-03: Vacuum Pump-Down of the Annular Insulation Space for Large Field-Erected Liquid Hydrogen Storage Tanks - Adam Swanger (NASA Kennedy Space Center)

10:45 C4Or1C-04: Liquid Hydrogen tank chill and no-vent fill prediction using computational fluid dynamics - Justin Pesich (NASA Glenn Research Center)

11:00 C4Or1C-05: Basic design of a cryogenic liquid hydrogen pump and of a laboratory-scale test rig - Henrik-Gerd Bischoff (Technische Universität Dresden)
10:00 - 12:00
Room: 314
Contributions

10:00 C4Or1D-01: Vibration-Free 40-80K Turbo-Brayton cryocooler and its very high efficiency recuperator for Earth Observation instruments - Matthieu Dalban-Canassy (Absolut System)

10:15 C4Or1D-02: Improvement of the two-stage Stirling cooler below 20K - Aogu Yasuda (Sumitomo Heavy Industries, Ltd.)

10:30 C4Or1D-03: Characterization Testing of the Northrop Grumman MiniCoolerPlus (MCP) - Nicholas Rich (Northrop Grumman)

10:45 C4Or1D-04: Characterization testing of the Air Liquide LPTC - Ian McKinley (Jet Propulsion Laboratory, California Institute of Technology)

11:00 C4Or1D-05: Characterization testing of the Thales LPT9310-HP - Ian McKinley (Jet Propulsion Laboratory, California Institute of Technology)

11:15 C4Or1D-06: Ball Low Cost, Low EFT, High Capacity Cryocooling Systems - Ryan Taylor (Ball Aerospace)

11:30 C4Or1D-07: Ball Modular Advanced Cryocooler Control Electronics (MACCE) - Ryan Taylor (Ball Aerospace)

11:45 C4Or1D-08: Next Generation Space Cryocooler Electronics Products - Kerry Frohling (Iris Technology Corporation)
10:00 - 11:30
Room: 323A
Contributions

10:00 J4Or1A-01: [Invited] Goldeneye - Large Scale Cryogenics for Next Generation of Superconducting-Based Quantum Computers. - Pat Gumann (IBM)

10:30 J4Or1A-02: [Invited] An Update on the Colossus mK Platform at Fermilab - Matthew Hollister (Fermi National Accelerator Laboratory)

11:00 J4Or1A-03: Characterizing MEMS Switch Reliability for Cryogenic Applications such as Quantum Computing - Peter Bradley (National Institiute of Standards and Technology)

11:15 J4Or1A-04: Fundamental superconductivity of Nb films for quantum computing application - Zuhawn Sung (Fermi National Accelerator Laboratory)
10:00 - 12:00
Room: 319B
Contributions

10:00 M4Or1A-01: [Invited] Magnetization and current sharing in REBCO cables and their impact on field error in Accelerator magnets - Mike Sumption

10:30 M4Or1A-02: [Invited] Spiral Copper-plated Striated Coated-conductor Cable at Kyoto University - Naoyuki Amemiya (Kyoto University)

11:00 M4Or1A-03: [Invited] IBS conductors developed for high field accelerator magnets - Dongliang Wang (Institute of Electrical Engineering, CAS)

11:30 M4Or1A-04: [Invited] IBS cables, model coils and application prospects on future high-energy accelerators - Dongliang Wang (Institute of Electrical Engineering, CAS)
10:00 - 12:00
Room: Emalani Theater (320)
Contributions

10:00 M4Or1B-01: [Invited] Technologies and Topologies for Cryogenic-Based Electric Aircraft - H. Alan Mantooth (University of Arkansas)

10:20 M4Or1B-02: [Invited] Cryogenic Power Conversion and Its Potential in Future All Electric Transportation Systems: From Silicon Age to WBG Era - Fang Luo (Stony Brook University)

10:40 M4Or1B-03: [Invited] Cryogenics power electronics for electrified aircraft propulsion - Fred Wang (UTK)

11:00 M4Or1B-04: [Invited] Effects of arc faults in HTS cables on the cryostat - Paul Mensah (Florida State University)

11:20 M4Or1B-05: [Invited] A Cryogenically-Cooled Power Device Packaging in High Altitude Applications: Heterogenous Integration Challenges and Requirements - Yongduk Lee

11:40 M4Or1B-06: [Invited] Lightweight clad bimetal conductors for cryogenic applications - Lukas Graber (Georgia Institute of Technology)