Name: ICEC29/ICMC2024
Start: 2024-07-22T08:00:00+02:00
End: 2024-07-26T17:00:00+02:00
Location: CICG - GENEVA, Switzerland

ICEC29/ICMC2024

from Monday 22 July 2024 (08:00) to Friday 26 July 2024 (17:00)

Monday 22 July 2024

11:45 Start of conference
Start of conference
11:45 - 12:00

12:00 Registration Desk and Publication Office open at conference center
Registration Desk and Publication Office open at conference center
12:00 - 16:00
13:00 ICEC course 1 "Cryostats for Accelerator Superconducting Devices" - Vittorio Parma (CERN)
ICEC course 1 "Cryostats for Accelerator Superconducting Devices"
- Vittorio Parma (CERN)
13:00 - 14:45
Room: Room B
ICMC course 1 "Materials selection for cryogenic applications" - Ignacio Aviles Santillana (CERN)
ICMC course 1 "Materials selection for cryogenic applications"
- Ignacio Aviles Santillana (CERN)
13:00 - 14:45
Room: Room C
14:45 Coffee & Tea Break (for course attendees only)
Coffee & Tea Break (for course attendees only)
14:45 - 15:15
15:15 ICEC course 2: "Cryocooler based cooling options, from principles to performance, to system integration" - Torsten Koettig (CERN)
ICEC course 2: "Cryocooler based cooling options, from principles to performance, to system integration"
- Torsten Koettig (CERN)
15:15 - 17:00
Room: Room B
ICMC course 2: "Cryogenic Materials & Magnet Technology for High Energy Physics Detectors" - Herman ten Kate (University of Twente / CERN)
ICMC course 2: "Cryogenic Materials & Magnet Technology for High Energy Physics Detectors"
- Herman ten Kate (University of Twente / CERN)
15:15 - 17:00
Room: Room C
18:00 Welcome Reception (and Registration) at CERN Science Gateway.
Welcome Reception (and Registration) at CERN Science Gateway.
18:00 - 20:00
Room: Science Gateway, at entrance of CERN
Tuesday 23 July 2024

08:00 Registration Desk and Publication Office open (8:30-18:00)
Registration Desk and Publication Office open (8:30-18:00)
08:00 - 08:20

08:20 Exhibition open (8:45-18:00)
Exhibition open (8:45-18:00)
08:20 - 08:40
Room: Exhibition area

08:45 Conference Opening (8:45)
Conference Opening (8:45)
08:45 - 08:50
08:50 Cryogenics at CERN (plenary 1)
Cryogenics at CERN (plenary 1)
08:50 - 09:35
Room: Room D
Contributions

08:50 Low temperature technologies for accelerators and detectors at CERN - Jose Miguel Jimenez (CERN)
09:35 Presentation of ICEC Klipping Award (John Weisend) & ICMC Excellence Award (Herman ten Kate)
Presentation of ICEC Klipping Award (John Weisend) & ICMC Excellence Award (Herman ten Kate)
09:35 - 09:45
09:45 Superconductor Technology (plenary 2)
Superconductor Technology (plenary 2)
09:45 - 10:30
Room: Room D
Contributions

09:45 Advancing Superconductor Technology for High-Field Applications: Current State and Emerging Trends - Carmine Senatore (UNIGE)
10:30 Coffee & Tea break
Coffee & Tea break
10:30 - 11:00
Room: Exhibition & Posters area
11:00 Large Scale Cryogenic Systems 1
Large Scale Cryogenic Systems 1
11:00 - 13:00
Room: Room D
Contributions

11:00 Status of the FCC cryogenics feasibility study (invited) - Laurent Delprat (CERN)

11:30 First-Year Operation Overview of the SLAC LCLS-II Cryoplant - Eric Fauve (STANFORD)

11:45 LCLS-II LINAC 2.0 K COMMISSIONING - Akanksha Apte (SLAC)

12:00 LCLS-II LINAC Cooldown Automation - Swapnil Shrishrimal (SLAC National Accelerator Laboratory)

12:15 Cryogenic architecture and heat loads for the High-Luminosity upgrade of the Large Hadron Collider at CERN - Vanessa Gahier (CERN)

12:30 Process design and control strategies of the two large 1.9K Helium refrigeration plants at CERN - Eriks Arajs (Linde Kryotechnik AG)

12:45 The consolidation program of the cryogenic systems of the ATLAS and CMS experiments - Olivier Pirotte (CERN)
Cryocooler Research
Cryocooler Research
11:00 - 13:00
Room: Room A
Contributions

11:00 Development of high-performance cryocoolers capable of operating from 120 K down to 5 mK - Haizheng Dang (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciencess)

11:15 Experimental investigation of a helium sorption cooler operating below 1 K - Kongkuai Ying (shanghai institute of technical physics Chinese academy of sciences)

11:30 Development of a remote cooling system for detector magnet current leads using a single-stage GM cryocooler - Weronika Gluchowska (CERN)

11:45 Numerical Modeling on a Two-Stage GM Cryocooler - Lydia Shen

12:00 Effect of operating parameters on step piston type pulse tube refrigerator - Sheng Xu (Tongji University)

12:15 100 K Cooling Performance of a Modified Collins Cycle Cryocooler for In-space Applications - Carl Bunge (MIT)

12:30 Development of a high efficiency micro pulse tube cryocooler for 80 K - Xiaoqin Zhi (Zhejiang University)

12:45 Optimal actively cooled shield temperature in vacuum insulated applications with multilayer insulation - Holger Neumann (Karlsruhe Instititute of Technology, Institute for Technical Physics; Cryogenics)
Coated Conductors, Films & Bulk
Coated Conductors, Films & Bulk
11:00 - 13:00
Room: Room B+C
Contributions

11:00 Correlation between vortex pinning and defect landscape in TLAG -$YBa_2Cu_3O_{7-\delta}$ nanocomposite films - Aiswarya Kethamkuzhi

11:15 Oxygenation under high pressure of EuBCO and GdBCO coated conductors - Tetiana Prikhna

11:30 PLD-grown (Y,Gd)BCO superconducting thin films: Jc enhancement by mixed phase REBCO and oxygen annealing - Ruslan Popov (Institute for Technical Physics, Karlsruhe Institute of Technology)

11:45 Effect of metamaterial engineering on the superconductive properties of ultrathin layers of NbTiN - Vera Smolyaninova (Towson University)

12:00 Signs of pressure-triggered decomposition of the REBCO layer in Coated Conductors subjected to thermomechanical stress - Pablo Cayado Llosa

12:15 Superior RE123 bulks with small RE211 particles in-situ self-formed at temperature above Tp - Simin Huang

12:30 Designing high Cr-alloy Eurofer with advanced properties by cryogenic processing for fusion - Patricia Jovicevic-Klug (Max-Planck-Institut für Eisenforschung)

12:45 Behaviour of superconducting coils inside the sub-cooled water ice - Pavol Kovac (Institute of Electrical Engineering, Slovak Academy of Sciences)
13:00 Lunch
Lunch
13:00 - 14:00
Room: Restaurant Area
14:00 Large Scale Cryogenic Systems 2
Large Scale Cryogenic Systems 2
14:00 - 16:00
Room: Poster area
Contributions

14:00 A thermodynamic analysis of a coupled LAES system for recycling liquid ethylene cold energy - Yihong Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Simulation of thermal compensation of the ESS cryogenic moderator system caused by a transient heat load change when the proton beams are turns on or off - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

14:00 Thermodynamic analysis of liquid air energy storage systems based on different liquefaction cycles - Zhaozhao Gao (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Failure analysis for liquid helium leaking to the vacuum envelope of the cryogenic distribution system of the ESS superconducting linac - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

14:00 Study of the influence of the plate-fin heat exchanger pressure drop on the performance of liquid air energy storage - Wei Ji

14:00 Thermodynamic analysis of an efficient liquefaction unit with high-grade cold storage in liquid air energy storage systems - Xiaoyu Fan (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Optimizing pre-cooling methods for liquid air energy storage power stations: A focus on cooling of tanks - Zhikang Wang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

14:00 Conceptual design of the cryogenic distribution system for the Shenzhen superconducting soft X-ray free electron laser - Guang Long Cui (Institute of Advanced Science Facilities, Shenzhen)

14:00 Carbon Footprint of the Helium Recovery System at the ISIS Neutron and Muon Source - Alexander Jones (Science and Technology Facilities Council)

14:00 Study on in situ measurement of heat leak into transfer line - Shinji Hamaguchi (National Institute for Fusion Science)

14:00 Enhancing liquid air energy storage efficiency through integration with LNG: comparative analysis of cold energy recovery methods - Junxian Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 An economic analysis of a coupled LAES system utilizing the regasification cold energy of liquid ethylene - Yihong Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Simulation of the JT-60SA supercritical helium cooling loops during magnet integrated commissioning using Simcryogenics - Francois Bonne (Univ. Grenoble Alpes, CEA IRIG-DSBT,Grenoble 38000 France)
Cryocoolers, Dilution Refrigerators & Magnetic coolers
Cryocoolers, Dilution Refrigerators & Magnetic coolers
14:00 - 16:00
Room: Poster area
Contributions

14:00 Experimental and theoretical investigation to study pressure drop in regenerators - Parikshit Badhe (IIT Bombay) Praveen Topagi (IIT Bombay)

14:00 Optimizing of regenerator materials for a high-frequency pulse tube cryocooler working below 3 K - Biao Yang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Pulse tube refrigerator with shared inertance tube - Shurui Zhang (Tongji university)

14:00 Computational Fluid Dynamic Studies of Miniature Pulse Tube Cryocoolers - Rajendra Kumar (Karlsruhe Institute of Technology)

14:00 Experimental study on a 1.3 W@4.2 K GM type pulse tube cryocooler - Xuming Liu (Southern University of Science and Technology) Changzhao Pan (Shenzhen International Quantum Academy)

14:00 Design methodology of a Mixed Refrigerant Joule-Thomson (MRJT) cryocooler - Darshit Parmar M D Atrey

14:00 Development of a 2 kW Class Two-Stage Cascade Type Mixed Refrigerant Joule-Thomson Refrigerator for Semiconductor Etching Process with Cooling Temperature Below -100℃ - Cheonkyu Lee (Korea Institute of Industrial Technology)

14:00 Development of the 4 K G-M assisted J-T cooler with off-the-shelf mini compressor - Giorgio Ghilardi (Korean Institute of Science and Technology)

14:00 Numerical and experimental study of a single-loop cryogenic pulsating heat pipe - Abhinav Singh (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur)

14:00 Cryogenic thermoelectric coolers with different passive branches - Hongwei Zhang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Investigation and optimization of the continuous and discrete heat exchangers in the mK dilution refrigerator for cooling superconducting quantum chips - Yujia Zhai

14:00 Thermodynamic analysis of a high cooling capacity dilution refrigerator under the critical velocity limitation of the dilute phase - Shiguang Wu (State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciencess)

14:00 Experimental study of a Dilution Refrigeration Unit for space applications - Zijie Pan (Key Laboratory of Technology on Space Energy Conversion, Technical Institute of Physics and Chemistry, CAS) Lingjiao Wei (Technical Institute of Physics and Chemistry, CAS) Ziyao Liu (Technical Institute of Physics and Chemistry, CAS)

14:00 Experimental and numerical study of a modified condensation-driven dilution refrigerator - Weijun Cheng (University of Chinese Academy of Sciences)

14:00 Experimental study of a single-stage adiabatic demagnetization refrigerator - Lingjiao Wei (中国科学院理化技术研究所)

14:00 Magnetocaloric alloys for active magnetic regenerative refrigeration - Eunjeong Kim (lawrence livermore national laboratory)

14:00 Experimental Study of a Coupled Stirling Generator-Pulse Tube Cryocooler System Driven by a Stirling Engine - yanjie Liu
Electronics, Sensors & Detectors
Electronics, Sensors & Detectors
14:00 - 16:00
Room: Poster area
Contributions

14:00 Conceptual design of a high intensity liquid ortho-deuterium moderator for the European Spallation Source - Yannick Beßler (Forschungszentrum Juelich GmbH, Central Institute of Engineering, Electronics and Analytics – Engineering and Technology (ZEA-1))

14:00 Machine Learning Framework for Anomaly Detection and Maintenance Optimization in Large-Scale Cryogenic Systems - Paolo Cacace (Sapienza Universita e INFN, Roma I (IT))

14:00 Overview of collaborative research between UNICAMP in Brazil and Fermilab in cryogenics. - Roza Doubnik (Fermi National Accelerator Laboratory, PO Box 500, Batavia IL 60510, United States.)

14:00 Monte Carlo simulation of the thermal radiation heat load to the cryogenic mirror and vacuum system of the Einstein Telescope - Xueli Luo (Karlsruhe Institute of Technology)

14:00 Numerical investigations on pressure wave refrigerators for sizing the dump tank and studying its effect on the operating frequency at first peak efficiency - Shariq Zafar (Indian Institute of Technology Kharagpur)

14:00 A helium isotope separation device with flow visualization unit - Qianxi Qu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Fabrication of Intrinsic Josephson Junction Devices using Hydrogen-Atmosphere Treatment - Hiromi Tanaka (National Institute of Technology, Yonago College)

14:00 Mixed-refrigerant cooled 10 kA current leads for superconducting applications - Jonas Arnsberg (Karlsruhe Institute of Technology)

14:00 Performance analysis of a cryogenic liquid air energy storage system coupled with LNG cold utilization and ORC - Jiahao Hao (Technical Institute of Physics and Chemistry, CAS)

14:00 GFK-Cryostat for a Cryogenic Current Comparator - Hannes Nowak

14:00 The development and validation of a multi-purpose cryostat for cryogenic pellet experiments - Richard Csiszar (HUN-REN Centre for Energy Research)

14:00 Preliminary development of near-feild radiative heat transfer measurement system for high-temperature superconductor - Bixi Li (Technical Institute of Physics and Chemistry)

14:00 Experimental research on heat transfer performance of low temperature support structure - Tiantian Xiao

14:00 Design and construction at CERN of an enhanced thermal conductivity measurement setup in the temperature range of 1.8 K to 50 K - Maha Rhandi (CERN)

14:00 Ultra low temperature noise thermometry and its applications at ISIS Neutron and Muon Source - Lucy Bain (ISIS Neutron and Muon Source)
Material Properties of Conductors, Insulation, Resins & Steel
Material Properties of Conductors, Insulation, Resins & Steel
14:00 - 16:00
Room: Poster area
Contributions

14:00 Fatigue strength properties of SS304 at cryogenic temperatures - D.S. Nadig

14:00 Design of a multipurpose test facility (MTF) for HTS cables - Diego Perini (CERN)

14:00 Measurement of critical current irreversibility limits on ReBCO tapes for mechanical axial tensile and compressive strain - Simon Otten (UTwente SuperACT)

14:00 Exploring 19 years of operating a superconducting wiggler at the Canadian Light Source - Denis Beauregard (Canadian Light Source (CLS))

14:00 Isothermal Discharge Current and Trap Characteristics of Epoxy Resin at Low Temperature - Jixiang Yan (TIPC)

14:00 Mechanical strength and stability of bulk insulation materials: A study on hollow glass microspheres and expanded perlite. - Friedrich Wolff (3M Germany)

14:00 Advanced Composite Insulation Systems for Niobium-Tin Superconducting Magnets: Electrical Characterization of Laminates at Cryogenic Temperatures - Javier Osuna (CERN)

14:00 Dielectric and thermal performance of insulation systems for quench heaters for the protection of superconducting magnets - Javier Osuna (CERN)

14:00 Adhesion analysis of resin impregnation systems in superconducting magnets - Roland Piccin (CERN)

14:00 Synthesis of graphene blended activated carbon adsorbents for cryo-adsorption vacuum pump application and their thermal conductivity evaluation at 80 K - Abdul Nazer K H (Department of Instrumentation, CUSAT) Pankaj Sagar (Cochin University of Science and Technology)

14:00 Effect of irradiation in ambient air and in liquid helium on the mechanical properties of SLA and FDM 3D printed high performance polymers - Christian Scheuerlein (CERN)

14:00 Mechanical and physical properties of AlMgSc-alloy developed for cryogenic temperature applications - Zahra Abbasi (Karlsruhe Institute of Technology, Institute for Technical Physics)

14:00 Characterization of XM-19 forge products at 4K for their use in fusion energy devices. - Enrique Rodriguez Castro (University Carlos III (ES))

14:00 The effects of cryogenic treatment on the performance and microstructure of austenitic stainless steel weldments - Zeju Weng (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Carbon fiber composites with cryogenic hydrogen-barrier property for liquid hydrogen storage tanks - Jiaqiao Zhang (Southeast University)

14:00 Thermal Properties and Microstructural Assessment of Glass Composites with Epoxy Matrix for Cryogenic Applications - Anna Krzak (Silesian University of Technology)

15:40 Relevance of Atomic Diffusion Additive Manufacturing (ADAM) in cryogenics and vacuum applications - Erik Walcz (Centre for Energy Research)
Expanders, Pumps, Compressors, Regenerators & other devices
Expanders, Pumps, Compressors, Regenerators & other devices
14:00 - 16:00
Room: Poster area
Contributions

14:00 The experimental investigation of gas-coupled free piston Stirling generators - Ziyao Liu (Technical Institute of Physics and Chemistry, CAS)

14:00 Investigation on multi-stage centrifugal cold compressors in superfluid helium cryogenic system - Jihao Wu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Design and Development of Cryogenic Dewar - Prof Swapan Chandra Sarkar (CENTRE FOR RURAL & CRYOGENIC TECHNOLOGIES, JADAVPUR UNIVERSITIES, KOLKATA-700032,INDIA)

14:00 Numerical and parametric analysis of Regenerator used in miniature Stirling cryocooler based on SWaP-C objectives for HOT IR technology - Dr. Zhang Xiaoqing

14:00 Experimental characterization of a compact centrifugal pump for liquid helium transfer - Johannes Doll (TU Dresden)

14:00 Porous-medium modelling for CFD simulation of perforated plate heat exchangers for cryogenic applications - TAPAS KUMAR NANDI (INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR)

14:00 The Influence of Filling Ratio and Number of Turns on Heat Transfer Performance of Nitrogen Pulsating Heat Pipe - Jixiang Yan (TIPC)

14:00 Thermal characterization of a three-fluid cryogenic heat exchanger - Carlos Hernando (CYCLOMED TECHNOLOGIES)

14:00 Study on motion characteristics of check valve in reciprocating liquid hydrogen pumps - Shaoqi Yang

14:00 Investigation on the dynamic response of aerostatic bearings-rotor system with different bearing gas - Liqiang Liu (Technical institute of physics and Chemistry,CAS)

14:00 Dynamic temperature variation of insulation materials for solid-phase cold storage tank of liquid air energy storage - Yihan Tian (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Evaluation on the operational state of turboexpanders in a helium refrigerator for nuclear fusion experimental devices using principal component analysis - Tetsuhiro Obana (NIFS)

14:00 Numerical and Experimental Study on Dynamic characteristics of gas spring resonant system - Ziyao Liu (Technical Institute of Physics and Chemistry, CAS)

14:00 Experimental study of the thermo-hydraulic performance of 3-stream plate-fin heat exchanger - Parthasarathi Ghosh (IIT Kharagpur India)

15:45 Cryopumps applied to Fusion Energy - MAST-U Enhancements Double Beam Box System - Kiyana Patel (UK Atomic Energy Authority)
H2 & LNG 1
H2 & LNG 1
14:00 - 16:00
Room: Poster area
Contributions

14:00 Modeling and dynamic simulation of liquid hydrogen-based low/high pressure hydrogen supply system using EcosimPro - Byeongchang Byeon (Korea Institute of Machinery & Materials)

14:00 Thermodynamic modeling of mobile cryogenic tanks with a liquid-cooled thermal shield - Valeryia Sidarava (Technical University of Munich, TUM School of Engineering and Design)

14:00 Numerical study on evaporation characteristics of LH2 tank during transportation under typical driving conditions - Shihao Li (Southeast University)

14:00 Dynamic modelling of catalyzed vapor cooled shield for accelerated chill down of a liquid hydrogen tank during refilling. - Liam Turner (Monash University)

14:00 ANN-CFD synergistic approach for improved predictions of pressure evolution in non-venting self-pressurized liquid hydrogen tanks - Anas A. Rahman (Assistant Professor of Mechanical Engineering)

14:00 Thermodynamic modelling of liquid hydrogen tank warm-up at low fill levels - James Wang (Monash University)

14:00 Simulation of cryo-adsorptive hydrogen storage performance of type III hydrogen storage tank in a wide pressure range - Linlin Gao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Structural design and optimization of cryo-compressed hydrogen storage vessels - Kexin Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Numerical modelling of tank motion on heat and mass transfer in liquid hydrogen storage - James Wang (Monash University)

14:00 Numerical Simulation of the Protective Effect of Air Walls on Liquid Hydrogen Leakage - Liqiang LIU (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Performance parameters of a compact cryogenic hydrogen test platform - Maximilian Grabowski (TUD Dresden University of Technology)

14:00 Cryo-Compressed Hydrogen Economic Analysis - Le Fang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 A review on determining the equilibrium ortho-parahydrogen ratio - Sebastian Eisenhut

14:00 A study on the scheme of cold energy recovery for compensating liquefaction in liquid hydrogen energy storage - Bingming Wang

14:00 Optimized Para Fraction of Liquid Hydrogen for Efficient Liquefaction and Storage - Ho-Myung Chang
14:30

14:30 - 15:30
Room: Room B+C

15:30 Coffee &Tea break
Coffee &Tea break
15:30 - 16:00
Room: Exhibition & Posters Area
16:00 Large Magnet Systems
Large Magnet Systems
16:00 - 18:00
Room: Room D
Contributions

16:15 Qualification of the first MgB2 and REBCO based Cold Powering System for HL-LHC - Amalia Ballarino (CERN)

16:30 Design and test of a 10 MJ hybrid high-temperature superconducting magnetic energy storage module - Tao Ma (Beijing Jiaotong University)

16:45 A thermal hydraulic evaluation method of toroidal field superconducting magnet for China’s next generation fusion reactor - Jinxing Zheng (Institute of plasma physics, Chinese Academy of Sciences)

17:00 Cryogenic options for future accelerators: case study for the Muon Collider ring - Patricia Tavares Coutinho Borges De Sousa (CERN)

17:15 The Cryogenic Distribution System for the High Luminosity LHC upgrade at CERN - Michele Sisti (CERN)

17:30 Commissioning of the cryogenic system of the HL-LHC Inner Triplet String test bench - Aleksandra Onufrena (CERN)

17:45 SIS100 By-pass line - from the sketch into the tunnel - Marion Kauschke
Thermal Properties & Numerical Studies
Thermal Properties & Numerical Studies
16:00 - 18:00
Room: Room A
Contributions

16:00 Numerical study on transient heat transfer in forced flow of superfluid helium - Yingxuan Hu (Zhejiang University, Institute of Refrigeration and Cryogenics)

16:15 Solubility of hydrogen in liquid helium - development of a measurement apparatus - Julian Will

16:45 Supercomputing of Cryogenic Fine Solid Nitrogen Particle Production Using Laval Nozzle for Physical Photo Resist Removal-Cleaning Technology - Jun Ishimoto (Institute of Fluid Science, Tohoku University)

17:00 Mesoscopic Numerical Study of Cryogenic Bubble Generation and Liquid-Vapor Interface Movement in Microgravity - HangJin Jo

17:15 Study of the thermo-mechanical properties of a lead-stainless-steel composite at 77 K - Fernando Aretio Zárate (CERN)

17:30 A new 3-omega technique for the measurement of thermal conductivity and diffusivity of cryogenic helium and hydrogen and their mixtures - Ben Hamilton

17:45 Improved Heat Transfer Prediction Methods in Channels for Natural Gas Liquefaction - Jinglei Wang (Zhejiang University)
New Devices & Concepts
New Devices & Concepts
16:00 - 18:00
Room: Room B+C
Contributions

16:00 Heat transfer and thermodynamic stability study of a self-sustained vertical cooling loop in He I and He II - Torsten Koettig (CERN)

16:15 Experimental improvements to the acoustic expander with applications to cryogenic refrigeration - Jacob Adams

16:30 Tracing characteristic evaluation of Spontaneously-Condensed Nitrogen Droplets in Cryogenic Wind Tunnels - Jiaxin Hou (Huazhong University of Science and Technology)

16:45 World’s 1st Magnetic Density Separation NbTi magnet, conduction cooled magnet performance & separation results - Goncalo Tomas

17:00 Demonstration of a novel electro-chemical hydrogen refrigerator - Daniel Hollibaugh (Eta Space LLC)

17:15 Techno-economic analysis of low-cost air separation units with peak-shaving - Zhikang Wang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

17:30 Development of Glass Fiber Composite Axial Insulating Cryogenic Vacuum Barrier for Superconducting Feeders of SST-1 Tokamak - Rajiv Sharma (Institute for Plasma Research)

17:45 Neutron imaging of an operational dilution refrigerator - Christopher Lawson (ISIS Neutron and Muon Source)
18:00 Exhibitors reception in Exhibition area
Exhibitors reception in Exhibition area
18:00 - 20:00
Room: Exhibition area
Wednesday 24 July 2024

08:00 Registration Desk and Publication OFfice open (08:30-18:00)
Registration Desk and Publication OFfice open (08:30-18:00)
08:00 - 08:20

08:20 Exhibition open (08:45-18:00)
Exhibition open (08:45-18:00)
08:20 - 08:40
Room: Exhibition Area

08:45 Opening statements Wednesday (8:45)
Opening statements Wednesday (8:45)
08:45 - 08:50
08:50 Cryogenics for Hydrogen (plenary 3)
Cryogenics for Hydrogen (plenary 3)
08:50 - 09:35
Room: Room D
Contributions

08:50 Cryogenics for Future Hydrogen Infrastructure - Lutz Decker (Linde Kryotechnik AG) Alexander Alekseev (Linde GmbH, Clean Energy Technology R&D, Pullach/Germany; Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology)
09:35 Presentation Cryogenics Best Paper 2023 Award (Ho-Myong Chang) & ICEC Mendelsson Award (John Weisend))
Presentation Cryogenics Best Paper 2023 Award (Ho-Myong Chang) & ICEC Mendelsson Award (John Weisend))
09:35 - 09:45
Room: Room D
09:45 Cryocoolers for magnets (plenary 4)
Cryocoolers for magnets (plenary 4)
09:45 - 10:30
Room: Room D
Contributions

09:45 Development of 4K-GM cryocooler and its applications for superconducting magnets - Toru Kuriyama (Toshiba)
10:30 Coffee & Tea break
Coffee & Tea break
10:30 - 11:00
Room: Exhibition & Posters area
11:00 Large Scale Cryogenic Systems 3
Large Scale Cryogenic Systems 3
11:00 - 13:00
Room: Room D
Contributions

11:00 Cryogenic Developments for the Einstein Telescope (invited) - Steffen Grohmann

11:30 First Cool Down and Heat Load Measurements in the DALS Cryomodule Test Bench - Xinbo Dong (Institute of Advanced Science Facilities, Shenzhen (IASF))

11:45 Design and progress of the helium refrigeration system for CRAFT superconducting magnet test facility - Xiao Fei Lu (Institute of Plasma Physics,Chinese Academy of Sciences)

12:00 STEP Cryogenic Refrigeration – a Roadmap - Paul Richardson (United Kingdom Atomic Energy Authority)

12:15 Cryogenics for Quantum Computer : Upscale challenges - Florian Martin (Air Liquide Advanced technologies) Jean-Marc BERNHARDT Luc GAFFET Mathieu Szmigiel (Air Liquide) Olivier GUIA

12:30 The CUORE cryostat, an infrastructure for rare-event searches at 10mK - Matteo Biassoni (INFN Milano-Bicocca (IT))

12:45 Heat load measurements of XFEL cryomodules using the helium evaporation method - Emna Abassi
Cryogenics for Aerospace
Cryogenics for Aerospace
11:00 - 13:00
Room: Room A
Contributions

11:00 Investigation on Efficient Cooling Methods for Cryogenic Fluid Pipelines - Shaolong Zhu (Zhejiang University)

11:30 NASA's progress maturing zero boil-off technology to enable long-duration space missions with cryogenic propellants - Mike Meyer

11:45 Cryogenic Tests of an Airborne Liquid Hydrogen Tank for a Manned Aircraft In the HEAVEN Project - Loic JEUNESSE

12:00 Feasibility study on isothermal storage of two cryogens in a single tank with a metal common bulkhead - Wujie Zhang (Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China)

12:15 Modelling LH2 tank operations for hydrogen-powered aircraft using generalised thermal models - Arne K. te Nijenhuis (NLR - Royal Netherlands Aerospace Centre)

12:30 Developments in liquid hydrogen on-board systems and ground-based infrastructures for sustainable aviation - Hendrie Derking (Cryoworld BV)

12:45 Cooling system for the MEESST MHD heat flux and radio blackout mitigation HTS Magnet probe - Matthieu Dalban-Canassy (Absolut System)
Stress & Strain Effects
Stress & Strain Effects
11:00 - 13:00
Room: Room B+C
Contributions

11:00 Can Stainless Steel Meet the Challenges of Future Cryogenic Engineering Systems? - Ignacio Aviles Santillana (CERN)

11:30 Transverse stress limits of Bi-2212 Rutherford cables at 11 T, 4.2 K - Simon Otten (UTwente SuperACT)

11:45 Onset of mechanical degradation due to transverse compressive stress in Nb3Sn Rutherford cables as a function of heat treatment and impregnation. - Kirtana Puthran (CERN, KIT)

12:15 Design and application of HTS magnet for magneto-hydro-dynamic plasma shielding in radio blackout and heat flux mitigation experiments - Sonja Schlachter (Karlsruhe Institute of Technology)

12:30 The mechanical research on high strength CICC jacket with YS>1500MPa@4.2K used for future fusion magnets - Weijun Wang

12:45 Impact of hydrogen embrittlement on cryogenic mechanical properties of 304 steel - Klaus-Peter Weiss (KIT, Institute for Technical Physics)
13:00 Lunch
Lunch
13:00 - 14:00
Room: Restaurant
14:00 H2 & LNG 2
H2 & LNG 2
14:00 - 16:00
Room: Poster area
Contributions

14:00 A study of an LNG cold energy cascade utilization system coupled with liquid air energy storage - Zhaozhao Gao (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Performance of an advanced liquid air energy storage system based on cold energy utilization at LNG receiving station - Junxian Li (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 A study on hydrogen liquefaction coupled with liquid air energy storage - Wang Zhiping

14:00 Heat transfer study on cryogen evaporation in stationary and moving tank - Saurabh Kumar Singh (IIT Bombay)

14:00 CFD modelling of the non-isobaric evaporation of cryogenic liquids in storage tanks - Felipe Huerta (Department of Chemical and Bioprocess Engineering, Pontificia Universidad Católica de Chile)

14:00 Thermal analysis of repurposing liquified natural gas tanks for liquid hydrogen storage - Susiri Costa (The University of Melbourne)

14:00 Analysis on sealing performance of piston rings used in the liquid hydrogen pump - Shaoqi Yang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Design and Commissioning of a Medium-Scale Hydrogen Liquefaction Plant - lianyou Xiong (Technical Institute of Physics and Chemistry, CAS)

14:00 Experimental investigation of 1,300 L zero-boil-off (ZBO) liquid hydrogen storage tank - Jiho Park

14:00 Experimental and theoretical investigation on avoiding freezing phenomena of Printed Circuit Heat Exchanger for cryogenic liquid hydrogen vaporizer - Wookyoung Kim (Korea Institute of Machinery and Materials (KIMM))

14:00 Topology optimization of cryogenic heat transfer in stressed rods for large liquid hydrogen tanks - Shixian Wu (Zhongshan Institute of Advanced Cryogenic Technology)

14:00 Investigate the effects of hydrogen-rich environment on the tensile properties of thermoplastic polymers for liquid hydrogen service - Zhenzhou Wang (Institute of Cryogenics, University of Southampton)
Materials, Testing & Electronic Devices
Materials, Testing & Electronic Devices
14:00 - 16:00
Room: Poster area
Contributions

14:00 Status of cryostat design for cryogenic payload suspension studies for the Einstein Telescope - Xhesika Koroveshi (Karlsruhe Institute of Technology (KIT))

14:00 Development and experimental validation of a versatile test bench for thermal contraction measurements down to 1.8 K - Stefan Hoell (CERN)

14:00 Instrumentation selection for cryogenic HTS coil gamma irradiation at doses up to 10MGy - Vicky Bayliss (Tokamak Energy)

14:00 Optimising grip designs for the tensile testing of advanced engineering materials at cryogenic temperatures - Nassos Spetsieris (National Physical Laboratory)

14:00 Acoustic Emission Analysis of Tensile Damage in Porous Carbon Fiber Composite Laminates from 20 K to 300 K - Rong Bao (Technical Institute of Physics and Chemistry, CAS)

14:00 Mismatch and retention time analysis of cryo-DRAMs down to 4 K - Jad Benserhir

14:00 Low Temperature Hybrid Graphene-Silicon Charge Amplifier - Marcos Turqueti

14:00 Experimental study of a novel coaxial annular tube convective heat switch - Yu Zhang (Southern University of Science and Technology)

14:00 Comparative Analysis of Reed Switches and Hall Sensors at Cryogenic Temperatures: An Argument for a Cost-Effective Alternative for Cryogenic Applications - Charles Jones (Infrared Laboratories)

14:00 PLASTIC FLOW INSTABILITY IN AUSTENITIC STAINLESS STEELS AT A WIDE RANGE OF TEMPERATURES: FROM MACROSCOPIC TESTS TO MICROSTRUCTURAL ANALYSIS - Jakub Tabin (Institute of Fundamental Technological Research, Polish Academy of Sciences, 02-106 Warsaw, Poland)

14:00 Two-dimensional discrete dislocation dynamics simulation of 316LN discontinuous plastic flow under cryogenic tensile behavior - Liancheng Xie

14:00 Influence of room temperature pre-strain on cryogenic tensile properties of modified N50 austenitic stainless steel - jingjing dai (Technical Institute of Physics and Chemistry)

14:00 The design and experimental research of a simple multiaxial test apparatus at cryogenic temperature - Yining Huang (Technical Institute of Physics and Chemistry, CAS)

14:00 Non-Destructive Measurement of Electrical Conductivity in Thin-Film Nb coated Cu for SRF Cavities using Planar Eddy Current Sensors - Namitha Venugopal (Cochin University of Science and Technology) Pankaj Sagar (Cochin University of Science and Technology)

14:00 In situ Mechanical Characterization of Hollow Specimens with Hydrogen and Helium Environments at Ambient and Cryogenic Temperatures - Elvina Gaisina

14:00 Feasibility Study of Rayleigh Backscattering Optical Fibre Strain Measurement Technique for Determining the Thermal Expansion of Lightweight Composite Structures - Oscar Sacristan De Frutos (CERN)

14:00 A Boiloff Calorimetry Test Configuration for the Characterization of Thermal Insulation Systems in Flammable Background Gasses - Adam Swanger (NASA Kennedy Space Center)
Cryogenic Applications & Cryocoolers 1
Cryogenic Applications & Cryocoolers 1
14:00 - 16:00
Room: Poster area
Contributions

14:00 A high efficiency single-stage 30 K pulse tube cryocooler - Yanen Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Experimental optimization of phase for a 20K thermal-coupled two-stage high-frequency pulse tube cryocooler - Yanjie Liu (Technical Institute of Physics and Chemistry, Chinese Academy of Science)

14:00 Post-assembly adjustable gas-gap heat switch - Koen Lotze (University of Twente)

14:00 Evaluating Fluid-Induced Vibrations in Sorption-Based JT Coolers - Arvi Xhahi

14:00 Theoretical and experimental study of a two-stage coaxial type Stirling pulse tube refrigerator - Chushu Fang

14:00 A single-stage high frequency 40K pulse tube cryocooler - Lingjiao Wei (Technical Institute of Physics and Chemistry, CAS)

14:00 A 150 K High Frequency Micro Pulse Tube Cryocooler - Ziyao Liu (Technical Institute of Physics and Chemistry, CAS)

14:00 A 15 W@76.8 K lightweight Pulse Tube Cryocooler operating at 100 Hz - Min Gao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

14:00 Evaluation of vibration characteristics of a 1.5W 4K pulse tube cryocooler with improved first stage cooling capacity - Ryoya Sato (Sumitomo Heavy Industries, Ltd.)

14:00 Performance improvement of low pressure interance pulse tube cryocooler - Maimuna Torsa Rafique (Karlsruhe Institute of Technology)

14:00 Design of a moving magnet type free piston Stirling cryocooler for futuristic space application - Biju T Kuzhiveli (National Institute of Technology Calicut)

14:00 The experiments of a two-stage pulse tube cryocooler with pressed Er-plated screen as regenerator material - Yanjie Liu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Instrumentation & Process Control
Instrumentation & Process Control
14:00 - 16:00
Room: Poster area
Contributions

14:00 Experimental investigation of a dual flow transfer system for liquid helium - Johannes Doll (TU Dresden)

14:00 Qualification of 0-60 mbar pressure transducers for the LHC HL-LHC environment at CERN - Juan Casas-Cubillos (CERN)

14:00 Capacitance-based mass flow rate measurement of 2-phase hydrogen in a ½ inch tube. - Benjamin Straiton (Tech4Imaging)

14:00 Design, measurements and calculation model validation of the orifice-type flowmeter for FAIR SIS100 Local Cryogenic System - Jaroslaw Polinski

14:00 MODERN VALVES FOR CRYOGENICS- DESIGN CONSIDERATIONS with FOCUS ON LIQUIFIED HYDROGEN and HELIUM - LEIRE COLOMO ZULAIKA (AMPO POYAM VALVES)

14:00 Strategies against thermo-acoustic oscillations in cryogenic valves and plants - Nicola Magginetti

14:00 Automation of Superconducting Cavity Cooldown Process Using Two-Layer Surrogate Model and Model Predictive Control Method - Keyu Zhu (中国科学院高能物理研究所)

14:00 Liquid helium level sensors on a PCB carrier with integrated temperature reading - Juan Casas-Cubillos (CERN)

14:00 Insertion thermometry experience at CERN - Nicolas Vauthier (CERN)

14:00 Qualification of standard pressure sensors for applications in superfluid helium at CERN - Douglas Valencon (CERN)

14:00 Design, Fabrication, and Characterization of an Interdigitated Micro-Capacitive Level Sensor Coupled with Signal Conditioning Circuit - Hrithik Krishna Raj Pankaj Sagar (Cochin University of Science and Technology)

14:00 Instrument Design for the Accelerator Cryogenic System - Dong Jichao (Institute of Advanced Science Facilities, Shenzhen)

14:00 EU-DEMO TFC WP4 current discharge thermohydraulical analyses and models: impacts of radial plates on operation domain with safety consideration. - Sylvie Nicollet

14:00 Development of an adsorption dehumidification system to supply dry air for the cryogenic refrigerator - Jung-Gil Lee (KITECH)

14:00 Development of the Control System for the ESS Cryogenic Moderator System - Attila Zsigmond Horváth (European Spallation Source)

14:00 Development of EPICS-based control system for RAON SCL2 cryogenic system - Sang-Gil Lee (IBS/RISP)

14:00 Incorporating new subsystem into an existing cryogenic controls system - Brian van Kuik (Brookhaven National Laboratory)

14:00 Simulation Analysis and Optimization on Steady-state Characteristics of Cryogenic Distillation for Helium Isotope Separation - Huan Chen (Technical Institute of Physics and Chemistry CAS)

14:00 The adsorption characteristics of helium on different activated carbons at 4.5-77K - nn Dai (中国科学院理化技术研究所)

14:00 Thermal contact resistance using time-resolved EUV diffraction -- a novel technique to study conduction-cooled superconducting RF cavity - Dipanshu Bansal (Indian Institute of Technology Bombay)

14:00 Commissioning of the Cryogenic control system for Cryomodules at ESS SRF Linac - Adalberto Ferreira Melo Fonotura (ESS ERIC)

14:00 Upgrade of Vertical Test Stand for 650 MHz Superconducting RF Cavities for CEPC - Lingxi Ye (IHEP)

14:00 Analysis of combined air-breathing and rocket engine for single stage to orbit vehicle - Biju T. Kuzhiveli (National Institute of Technology Calicut, India)
Large Scale Cryogenic Systems 4
Large Scale Cryogenic Systems 4
14:00 - 16:00
Room: Poster area
Contributions

14:00 2 K system exergetic optimisation and helium recovery system for FCC-ee - Boyan-Kaloyanov Naydenov Popov (CERN)

14:00 SLAC Cryoplant Comparison: Evaluating Performance of Identical Systems - Akanksha Apte (SLAC)

14:00 Conceptual design of the Divertor Tokamak Test (DTT) Cryogenic System - Morena Angelucci (ENEA)

14:00 Design, installation and commissioning of the cryogenic system for NNBI test facility - Zhigang Zhu (Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences)

14:00 Preliminary research of the fast cooldown (FCD) problem of SRF cavities using CFD method - ZHENG SUN (Dalian Institute of Chemical Physics)

14:00 CRYOGENIC SYSTEM FOR THE HIGH ENERGY PHOTON SOURCE AT IHEP - Rui Ge

14:00 The FCCee collider and booster: study of the SRF cryogenic systems and machine architectures - Vittorio Parma (CERN)

14:00 First operation of the cryo supply for Wendelstein 7-X cryo vacuum pumps - Michael Nagel

14:00 HIE ISOLDE CRYOGENIC OPERATION RESULTS AND RECENT UPGRADES - Nicolas Guillotin (CERN)

14:00 Process design and calculation of DALS test facility cryogenic system using Ecosimpro - ZHENG SUN (Dalian Institute of Chemical Physics)

14:00 Development and performance test of a cryogenic environment simulation facility for building elements - Haocheng Wang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Seat leak tests and commissioning of control valves in the cryogenic distribution system of the ESS superconducting linac - Jianqin Zhang (European Spallation Source ERIC)

14:00 Development and Commissioning of 1KW @ 4.5K Cryogenic System for Superconducting Test Facility of CRAFT - Qiyong Zhang (Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences)

14:00 Second cool-down result of SCL3 cryogenic plant for Korean heavy ion accelerator, RAON - Junghyun YOO (Institute for Basic Science)

14:00 Second cool down of the superconducting cavities of RAON Accelerator with the cryogenic helium distribution system - Inmyung Park
Large Magnet Systems
Large Magnet Systems
14:00 - 16:00
Room: Poster area
Contributions

14:00 Study on Extreme Condition Stability of Miniaturized High-Temperature Superconducting Magnets Based on Sterling Conduction Cooling System - Haiyang Liu (Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences)

14:00 Design of a cryogenic test platform for CICC cooled by superfluid helium forced flow - Ziwu Li

14:00 Operational experience and maintenance strategies developed over nearly three decades of continuous operation of the AGOR superconducting cyclotron cryogenics system - Brian Jones (UMC-Groningen PARTREC)

14:00 Design of the cryogenic system of the CYCIAE-2000 MeV superconducting magnet - Suping Zhang (China Institute of Atomic Energy) hongji zhou

14:00 High-gradient magnetic separation for wastewater treatment based on direct-conduction cooling superconducting magnets with large diameter, room temperature aperture - Chuanjun Huang

14:00 Development and testing of the internal sliding support for the Cryogenic Distribution Line for the HL-LHC - Bartosz Łoziński (KrioSystem Sp. z o.o.)

14:00 Optimization of 1 T HTS main magnet for Extremity MRI using Real-Coded Genetic Algorithm - SUMIT KUMAR CHAND (Research Scholar)

14:00 Assembly process and quality control of the magnet cryostats for the HL-LHC project at CERN - Alisdair Douglas Seller (CERN)

14:00 Investigation of the influence of residual strain of epoxy resin on critical current of HTS tape by using fiber Bragg grating sensors - Wanyin Zhao (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Cryostats for the HL-LHC magnets: Pre-series production, assembly infrastructure and project plans - Delio Ramos (CERN)

14:00 Development status of a NbTi conduction-cooled superconducting quadrupole magnet combined with dipole correctors for the ILC main linac - Tomohiro Yamada (High Energy Accelerator Research Organization)

14:00 Mechanical design of the multi-channel liquid helium cryogenic transfer lines - Li Zhu (Institute of Modern Physics, Chinese Academy of Sciences)

14:00 Detailed study of the cryogenic jumper connections between the cryogenic distribution line and the superconducting magnets of the High Luminosity LHC upgrade at CERN - Fabio Merli (CERN)

14:00 Effect of thermal contact between gas-cooled REBCO conductors on hot-spot temperature in fusion magnets - Ho-Myung Chang

14:00 A new cryogenic test facility for superconducting magnets at IMP - Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)

14:00 Design study of a superconducting dipole magnet with active shielding for a heavy-ion rotating gantry - Tetsuhiro Obana (NIFS)

14:00 LHC cryogenics and helium management in case of a major power outage - Benjamin Bradu (CERN)

14:00 The Design of a Curved Cryostat for the 90° Superconducting Magnet - Yang Yao

14:00 The Design of a Horizontal Testing Cryostat for the Superconducting curved magnets of Compact Synchrotron - Weiyu Qiao

14:00 Recent developments of dark matter research magnet systems at Oxford Instruments - Yuwei Ge (Oxford Instruments NanoScience)

14:00 SMES HTS tape length optimization using ANN based digital twin - Sumit Kumar Chand (Indian Institute of Technology, Kharagpur, India)
15:30 Coffee & Tea break
Coffee & Tea break
15:30 - 16:00
16:00 Cryocoolers Applications
Cryocoolers Applications
16:00 - 18:00
Room: Room D
Contributions

16:00 Vibration-free Mirror Coating Test Facility for the Einstein Telescope - Koen Lotze (University of Twente)

16:15 Release of 4K GM-JT cryocooler system RJT-100ST - Toshiya Nagai (SHI)

16:30 Investigation of a Helium cooling circulation loop on a 1.3 GHz cavity structure - Maria Chioteli (CERN)

16:45 Mechanical design of a superconducting magnet for gravity compensation - Xinglong Guo (Suzhou Bama Superconductive Technology Co., Ltd)

17:00 Investigation of Structure Effects on Jet Impingement and Energy Recovery in Miniature Open-cycle Joule-Thomson Cryocoolers - Xing Xiao (Huazhong University of Science and Technology)

17:15 Commissioning and first results of an experimental setup for the characterization of cryogenic pulsating heat pipes - Carolin Zoller (Paul Scherrer Institut (PSI))

17:30 PT410 Cold Head dynamic characterization - Sandra Pérez Barrio (Instituto Nacional de Técnica Aeroespacial, Departamento de Cargas Útiles Espaciales, Área de Ingeniería Termo Mecánica)

17:45 C400 – 10 K remote helium cooling loop for ions carbon cyclotron application - Paul HILLIERE (Absolut System)
Application H2 and LNG 1
Application H2 and LNG 1
16:00 - 18:00
Room: Room A
Contributions

16:00 Development of a lab-scale hydrogen liquefaction system - Hendrie Derking (Cryoworld BV)

16:15 Customized hydrogen liquefier system for applications up to 50 kg per day - Younesse Maaizi (Absolut System)

16:30 Experimental study on the thermal performance of printed circuit heat exchangers used for liquid hydrogen fueling stations - Minchang Kim (Korea Institute of Machinery and Materials)

16:45 A preliminary experimental study on thermal stratification in horizontal cylindrical cryogenic liquid storage vessels - Thomas Just (Technische Universität Dresden)

17:00 Design optimization and heat transfer characteristics of multilayer insulation structures for liquid hydrogen tanks - Hongyu Lv (Xi’an Jiaotong University)

17:15 Permeability testing of fibre reinforced thermoplastic pipes – validation and results - Thomas Just (Technische Universität Dresden)

17:30 Using Waste Cold from LNG Conversion to Enhance Cold Food Supply Chains in India - Swapan Chandra Sarkar (CENTRE FOR RURAL & CRYOGENIC TECHNOLOGIES, JADAVPUR UNIVERSITIES, KOLKATA-700032,INDIA)

17:45 Experimental study of cryogenic fluid flow in porous thermal insulation materials - Peng Xu (Shanghai Jiao Tong University)
Superconductors & Applicatons
Superconductors & Applicatons
16:00 - 18:00
Room: Room B+C
Contributions

16:00 Production of 2G HTS tape at Faraday Factory Japan - Alexander Molodyk (Faraday Factory Japan)

16:15 A REBCO coating process for high-field applications - Neil Lamas

16:30 A Data-Driven Approach for Modelling the Relationship between Fabrication Parameters and Critical Currents of REBCO Coated Conductors in a Real-Scale Pulsed Laser Deposition System - Takanobu Kiss (Kyushu University)

16:45 Fabrications and superconducting properties of Ba1-xKxFe2As2 composite round wires - Chiheng Dong (Institute of Electrical Engineering, Chinese Academy of Sciences)

17:00 Effects of the adhesions between impregnation system and coil components on the training of Nb3Sn Rutherford cables - Guillaume Campagna (CEA Paris Saclay)

17:15 Modeling of Electro-Thermal Quench of a REBCO Superconducting Coil for Aircraft Propulsion Motors - Arif Hussain

17:30 Correlating growth rate with vortex pinning and defect microstructure in Transient Liquid Assisted Growth (TLAG) of superconducting REBCO film - Ona Mola Bertran (ICMAB - CSIC)

17:45 Qualification of the round REBCO cables of the SC-Links of HL-LHC - Aisha Saba (CERN)
18:00 Free evening
Free evening
18:00 - 18:30
Thursday 25 July 2024

08:30 Registration Desk and Publication Office open (08:30-17:00)
Registration Desk and Publication Office open (08:30-17:00)
08:30 - 08:45

08:45 Exhibition open (9:00-16:00)
Exhibition open (9:00-16:00)
08:45 - 09:00
Room: Exhibition area
09:00 Cryogenics Instrumentation & Devices
Cryogenics Instrumentation & Devices
09:00 - 10:30
Room: Room D
Contributions

09:00 Numerical modeling and design of the acoustic expander for cryogenic refrigeration - Nathaniel O'Connor (MIT Lincoln Laboratory)

09:15 Transient numerical investigation on sealing performance of square labyrinth seal in the liquid hydrogen piston pump - Xiujuan XIE (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

09:30 Experimental investigation of a cryogenic printed circuit heat exchanger - Zixin Zhang

10:00 Flow characteristics of cryogenic perforated plate balanced flowmeter - Yihan Tian (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

10:15 Cryogenic helium valves deflection and relaxation in ESS linac cryogenic distribution system - Jaroslaw Polinski (Wroclaw University of Science and Technology)
Instrumentation & Process Control
Instrumentation & Process Control
09:00 - 10:30
Room: Room A
Contributions

09:00 LCLS-II LINAC 2K Pump-down and Controls Automation - Swapnil Shrishrimal (SLAC National Accelerator Laboratory)

09:15 Advancements in cryogenic cable harness technology: Enabling connectivity for extreme-temperature environments in space and earthbound missions - Michael Berens (Glenair GmbH)

09:30 Measurement and control architecture of research cryostats - Eberhard Rosenthal (Forschungszentrum Juelich GmbH, Central Institute of Engineering, Electronics and Analytics – Engineering and Technology (ZEA-1))

09:45 Visualization of second sound waves based on laser interferometry - Guoliang Li (Zhejiang University)

10:15 Electrical capacitance volume sensor for microgravity mass gauging: advancements in sensor calibration for microgravity fluid configurations and propellant management devices - Matt Charleston (Tech4Imaging, LLC)
Materials & Testing
Materials & Testing
09:00 - 10:30
Room: Room B+C
Contributions

09:15 Review on progresses of the homemade 15T LTS solenoidal background magnets using for material testing facility and ultra-high magnet fabrication：Magnet Design, Manufacture and Testing - Peng Gao (Institute of Plasma Physics Chinese Academy of Sciences)

09:45 Structural and thermal design of cryogen-free mechanical property testing cryostat - Shanaka Baduge (The University of Melbourne)

10:00 Analytical investigation and experimental validation of thermal & AC characterization of HTS Tape for modular superconducting fault current limiter - Tripti Sekhar Datta (Indian Institute of Technology. Kharagpur. India)

10:15 Sensing of cryogenic temperatures by superconducting NbTi(N) thin-film S-shaped Split Ring Resonators - André Chatel (EPFL - STI IEM - LMIS1)
10:30 Coffee & Tea break
Coffee & Tea break
10:30 - 11:00
11:00 Large Scale Cryogenic Systems 5
Large Scale Cryogenic Systems 5
11:00 - 13:00
Room: Room D
Contributions

11:00 Overview and status of the cryogenic system for SHINE accelerators - Jiuce Sun (ShanghaiTech University)

11:30 Thermal performance test of the cryogenic transfer line for SHINE cryogenic system - Jiuce Sun (ShanghaiTech University)

11:45 Commissioning progress of the first cryoplant for SHINE accelerator - Shuai Zhang (Shanghai Advanced Research Institute, Chinese Academy of Sciences)

12:30 Overview and Status of the Long-Baseline Neutrino Facility Far Detectors Cryogenics System - David Montanari (Fermi National Accelerator Lab. (US))

12:45 CERN NEUTRINO PLATFORM CRYOGENICS, THE DARKSIDE-20K EXPERIMENT - Tiziano Baroncelli (CERN)
Hydrogen Liquefaction, Storage and Use 2
Hydrogen Liquefaction, Storage and Use 2
11:00 - 13:00
Room: Room A
Contributions

11:00 Cryogenic H2 for heavy-duty trucks: applying fundamental thermodynamics to solve clean transportation challenges - Loic Jeunesse (Campus Technologies Grenoble)

11:15 Measurements on the catalytic ortho-parahydrogen conversion using hydrous ferric oxide - Sebastian Eisenhut

11:30 Experimental Investigation of Continuous Ortho-Para Hydrogen Conversion for Hydrogen Liquefaction within the Range of 40-80 K - Junjie Teng (Zhejiang University)

11:45 Trial measurement for para-to-orthohydrogen back conversion under the Fe(OH)3 catalyst condition at J-PARC cryogenic moderator system - Gen Ariyoshi (Japan Atomic Energy Agency)

12:15 Prediction of pressure evolution with artificial neural network using extended datasets for non-venting liquid hydrogen tanks - Anas A. Rahman (Assistant Professor of Mechanical Engineering)

12:30 First commissioning of the ESS cryogenic moderator system using nitrogen and helium - Hideki Tatsumoto (European Spallation Source ERIC (ESS))

12:45 Structure Design of a Novel Corrugated Membrane for Large-scale Liquid Hydrogen Storage - Xinyuan Liu (Zhongshan Institute of Advanced Cryogenic Technology)
Cooling strategies, LN2, Links, Health & Safety
Cooling strategies, LN2, Links, Health & Safety
11:00 - 13:00
Room: Room B+C
Contributions

11:00 FCC-ee cavities RF power coupler: study on the optimal cooling strategy to boost the cryomodule energy efficiency. - Karin Canderan (CERN)

11:15 Optimization of cryogenic mixed-refrigerant cascades for intermediate cooling stations of the long-distance superconducting power cable SuperLink - Friederike Boehm

11:30 Pressure Relieving Approach for the S3FEL Cryogenic Distribution System - Xinbo Dong (Institute of Advanced Science Facilities, Shenzhen (IASF))

11:45 An experimental analysis of flow and mass transfer characteristics of cryogenic liquid nitrogen and oxygen countercurrent on the structured packing - Yixuan Teng (Zhejiang University)

12:00 Heat transfer and vapor behavior on microstructure surface in liquid nitrogen for application to cryopreservation of living cells - Masakazu Nozawa

12:15 Development of a cryogenic detection chain for low field MRI - Bastien Dassonneville

12:30 Operation and control of superfluid helium in a Healthcare device - Ernst Wolfgang Stautner (GE HealthCare – Technology & Innovation Center, Niskayuna, USA)

12:45 Implementation and Enhancement of Safety Measures in SST-1 Cryogenic System at 77 K and 4.2 K - Rajiv Sharma (Institute for Plasma Research)
13:00 Lunch
Lunch
13:00 - 14:00
Room: Restaurant

14:00

14:00 - 15:30
Room: Room B+C
Cryo-aerospace, Quantum Systems & Materials
Cryo-aerospace, Quantum Systems & Materials
14:00 - 16:00
Room: Poster area
Contributions

14:00 Impact of cold finger geometry on low temperature pule tube cooler performances - Lucas Methivier (Univ. Grenoble Alpes, CEA, IRIG-DSBT)

14:00 Development of cryogenic cooling system for low emission future aircrafts - Swapnil Kharche (Airbus UpNext)

14:00 Heat Dissipation induced by Microvibrations in Low Temperature Systems - Thomas Adam (Univ. Grenoble Alpes, CEA, IRIG-DSBT)

14:00 The Mode Selector Mechanism (MSM): a bi-stable cryo-actuator operated at 4.2K - Etienne Lallemand (Centre spatial de Liège (CSL), Université de Liège (ULg)) Tanguy Thibert (Centre spatial de Liège (CSL), Université de Liège (ULg))

14:00 A hybrid 3He Joule-Thomson cryocooler using a spiral flow channel evaporator for space applications - Ziyao Liu (Technical Institute of Physics and Chemistry, CAS)

14:00 A comparative study of rapid chill-down technologies in cryogenic applications - Minsub Jeong

14:00 Cryogenic liquid propellant densification system using multiple ejectors - Jisung Lee (Korea Aerospace Research Institute)

14:00 Experimental investigation and performance prediction of cryogenic temperature sensor for cryogenic rocket engine using artificial intelligence techniques - D.S. Nadig

14:00 Design and Performances of an Optical Cryostat at 2 K - Marek Zeman (CNRS, Absolut System)

14:00 A Comprehensive Overview of Gravity Measurement Utilizing a SQUID - Gracia Kim (Quantum Mass Metrology Group, Korea Research Institute of Standard and Science (KRISS))

14:00 Analytical model for the calculation and optimisation of cryogenically cooled current leads and wire interconnects - Suzanne Dang (Absolut System)

14:00 Design and Performances of a Table-Top 500 mK Cryostat for a 100 Spin-Qubits Quantum Computing Application - victor doebele (CNRS)

14:00 A user-tuneable heat link for use at temperatures below 4K - Benjamin Steele (Chase Research Cryogenics Ltd)
Applications in Medical, Food, Power & Safety
Applications in Medical, Food, Power & Safety
14:00 - 16:00
Room: Poster area
Contributions

14:00 Cryogenic facility set up for superconducting accelerator magnets and power transmission lines at INFN - Domenico D'Agostino (INFN-Napoli, Gruppo Collegato di Salerno, 80084 Fisciano, Italy)

14:00 Design and optimization of the cryogenic structure of the concentric high temperature superconducting cable joint - BANGZHU WANG

14:00 Investigation of Liquid Nitrogen/Fluorocarbon Mixture for HTS Apparatus - Qingquan Qiu

14:00 Analysis of fault current limiting performance of resistive-type hybrid SFCL for parallel operation of distribution transformers - Dong Eun Kim (LS ELECTRIC Co., Ltd.)

14:00 Flywheel type uninterruptible power supply using high temperature superconducting induction machine - Hanzawa (Yokohama National University)

14:00 Innovative cryogenic systems for cooling superconducting wind turbine electrical generators in the 20-65 K temperature range - Guillaume Delautre (Air Liquide) Pierre Barjhoux (Air Liquide Advanced Technologies) pierre crespi

14:00 Numerical investigation on the dispersion characteristics of cryogenic helium vapor cloud in confined space - Yuanliang Liu (Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences)

14:00 Safety at HL-LHC IT String during construction, commissioning, and operation - Davide Bozzini (CERN)

14:00 Design, implementation, and preliminary testing of the interlocks and safety functions for the CMDS (cryomodule and cryogenic distribution system) master system at the European Spallation Source ERIC - Emilio Asensi Conejero (European Spallation Source ERIC)

14:00 Vaporization of cryogenic liquid stored in damaged vacuum-insulated tank - Le-Duy Nguyen (Korea Institute of Machinery and Materials)

14:00 Development of whole-body cryochambers based on a mixed-gases Joule-Thomson refrigeration cycle - XIAN WANG (Technical Institute of Physics and Chemistry)

14:00 Cold mass suspension system of a rotating gantry for medical applications. - Luca Piacentini (Riga Technical University (LV))

14:00 Comparative study on the effects of isochoric cryopreservation and liquid nitrogen flash freezing on the quality of fish - Zeju Weng (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Large Scale Cryogenic Systems 6
Large Scale Cryogenic Systems 6
14:00 - 16:00
Room: Poster area
Contributions

14:00 LBNF/DUNE nitrogen refrigeration system update - Markus Graf (Fermilab)

14:00 Efficiency increase of cryoplants by retrofitting with state-of-the-art turbine technology - Marco Muehlegger (Linde Kryotechnik AG)

14:00 Development of Cold Box for Upgradable Helium Refrigerator Plant of 200W at 4.5 K - Ananta Sahu (Institute for Plasma Research)

14:00 Proven cryogenic solutions for large power under 4.5K by ALAT - Jean-Marc Bernhardt (Auteur) Nicolas chantant Pascale Dauguet (Auteur) Yannick Fabre (Auteur)

14:00 nEXO Underground LN2 Plant at SNOLAB - Tristan Hillier (SNOLAB)

14:00 System integration and commissioning of helium liquefier - Bingming Wang

14:00 The influence of the UA ratio between heat exchangers on the temperature distribution - Gang Zhou (Techincal Institute of Physics and Chemistry, CAS)

14:00 PRELIMINARY design of a new Helium liquefaction system at LBL - Li Wang (Lawrence Berkeley National Lab)

14:00 Design of cold box for air liquefaction with capacity of 10 ton/day - Yong-Ju Hong

14:00 Automated operation modes for the ESS cryogenic moderator system - Attila Zsigmond Horváth (European Spallation Source)

14:00 Application, development and future of helium compressor in large-scale cryogenic engineering - Jingyu Li (University of Chinese Academy of Sciences, Beijing 100049, China) zhongjun Hu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)

14:00 The Failure Analysis of the Turbine for Helium Cryogenic System at Taiwan Light Source - Huang-Hsiu Tsai (National Synchrotron Radiation Research Center)

14:00 Development of a Hardware-In-the-Loop (HIL) simulation system for a 3000L/h helium liquefier - Gang Zhou (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Jing Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Design of a 10 ton/day air liquefaction system for liquid air energy storage - Sehwan In (Korea Institute of Machinery and Materials)

14:00 MITICA Cryoplant - Grigory Kouzmenko (F4E) Jose Daniel Dupuy Exposito

14:00 Analysis and optimization of helium liquification process utilizing the turbo Brayton refrigerator as the pre-cooling stage - Jin Zhen Wang (Technical Institute of Physics and Chemistry, CAS) Jihao Wu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Integrated design of an 18kW@4.5K/4kW@2K helium cryogenic refrigeration system for CiADS - Shaoqi Yang (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Xiujuan Xie (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Thermal Properties
Thermal Properties
14:00 - 16:00
Room: Poster area
Contributions

14:00 A GUI Based Property Package for Thermo-physical Properties of Cryogenic Fluids - Hitensinh Vaghela Nitin Shah Parthasarathi Ghosh

14:00 Strange Behavior of Boiling Around Wire Heater at The Pressure Condition Very Close to The Lambda Point - Shinji Hamaguchi

14:00 Thermal analysis of a conduction-cooled superconducting quadrupole for ILC Main Linac with large temperature margin - Oscar Duran Lucas (CIEMAT - Centro de Investigaciones Energéticas Medioambientales y Tec. (ES))

14:00 Thermal conductance measurement of electrically insulated joints for cryogenic applications - Vijay Soni (GE HealthCare Technology and Innovation Center, Niskayuna, NY 12309, USA)

14:00 Development of a Machine Learning-Based Model for Cryogenic Film Boiling Flow Pattern Prediction During Transfer Line Chill-Down Operation - Parthasarathi Ghosh (IIT Kharagpur India)

14:00 Cryogenic contact resistance and material conductivities in astronomic instrumentation: an experimental characterization. - Antonio Zamora-Jiménez (INSTITUTO DE ASTROFÍSICA DE CANARIAS) Eduardo David González-Carretero (INSTITUTO DE ASTROFÍSICA DE CANARIAS) Haroldo Lorenzo-Hernández (INSTITUTO DE ASTROFÍSICA DE CANARIAS)

14:00 Heat transfer characteristics analysis of the large-scale cold storage solution based on moving bed - Xiaoyu Fan (Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Cryogenic emissivity testing apparatus for insulating materials cooled by a cryocooler - Liubiao Chen

14:00 Research on transient measurement of thermal conductivity of ultra-low temperature frozen soil - pengfei zhao (Zhongshan Institute of Advanced Cryogenic Technology)

14:00 Model and dynamic simulation of the liquid hydrogen distribution by trailer - Christian Wolf (Linde GmbH, Clean Energy Technology R&D, Pullach/Germany; Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology)

14:00 Thermodynamic scaling analysis of cavitation-induced fluid transients in a cryogenic environment - Arjun Garva (Indian Institute of Technology Kharagpur, India)

14:00 Modelling heat ingress in LH2 containment systems – benchmarking improved thermal resistance network models against the finite element method - Sindre Stenen Blakseth (SINTEF Energy Research / Norwegian University of Science and Technology)

14:00 Numerical modelling of cavitation-induced water hammer in cryogenic fluid management systems with finite volume method - Arjun Garva (Indian Institute of Technology Kharagpur, India)

14:00 Unusual thermal properties of the nonsuperconducting PrBCO cuprates at low temperatures - Mahieddine Lahoubi (Badji Mokhtar Annaba University)

14:00 Experimental study of enhanced cryogenic cool-down performance in metal pipe with polymer coating on the inside - Youngjun Choi (Changwon National University, Department of Smart Manufacturing Engineering, Changwon, South Korea)

14:00 Volume calculation and heat transfer performance simulation of a helical tube - Meimei Zhang
Cryocoolers 2
Cryocoolers 2
14:00 - 16:00
Room: Poster area
Contributions

14:00 Numerical investigation of free piston Stirling cooler with annular regenerator for moderate cryogenic temperature applications - Biju T. Kuzhiveli (National Institute of Technology, Calicut, India)

14:00 Development of two-stage Stirling cooler for simultaneous cooling at 100 K and 50 K - Bokeum Kim (KAIST)

14:00 Development of a high-capacity single-stage 20K GM cryocooler - Yoshinori Fujii (Sumitomo Heavy Industries, Ltd.)

14:00 Study on the performance of liquid helium re-liquefier for superconducting chip test - Guopeng Wang (Technical Institute of Physics and Chemistry, CAS)

14:00 Experimental study of silver powder sintering for optimization of sintered heat exchanger in dilution refrigerator - Lingjiao Wei (Technical Institute of Physics and Chemistry, CAS)

14:00 DESIGN AND COMMISSIONING OF THE NITROGEN CRYOGENIC SYSTEM FOR THE HEPS - Ma Changcheng (Institute of High Energy Physics Chinese Academy of Sciences)

14:00 A helium isotope separation system with an optimized entropy filter - Liguo Wang (University of Chinese Academy of Sciences)

14:00 Cryocooler-based conduction cooling technology development for 1.3 GHz Nb3Sn superconducting radio frequency cavity - Tomohiro Yamada (High Energy Accelerator Research Organization)

14:00 Investigation of the stand-alone cryomodule for the 3rd harmonic cavity of the synchrotron light source - Junho Han (Kiswire Advamced Technology Co. Ltd.)

14:00 PRELIMINARY design of a LH2 target cooling system at LBL - Li Wang (Lawrence Berkeley National Lab)

14:00 Conduction Cooling Test Facility for Superconducting Model Coils - Luis Antonio Gonzalez Gomez ((CIEMAT - Centro de Investigaciones Energéticas Medioambientales y Tec. (ES)))

14:00 Development of a cryogen-free test cryostat for a superconducting CCT short magnet - Arthur IZIQUEL (Accelerators and Cryogenic Systems)

15:45 Cryocooler development for superconducting applications - Louise Terrien (Absolut System)
Superconductors, AC Loss & Stability
Superconductors, AC Loss & Stability
14:00 - 16:00
Room: Poster area
Contributions

14:00 Modelling the effect of anisotropic elasticity of REBCO on the mechanics of high field magnets with screening currents - Anang Dadhich (Slovak Academy of Sciences)

14:00 Improvement in Jc of KIT-CERN (KC4) REBCO tapes through a study of growth defects - Sukanya Baruah (ITEP, Karlsruhe Institute of Technology)

14:00 Investigation of the emittance properties of multilayer insulation used in cryogenic applications - Uday Kumar (ITER-India, Indian Institute of Technology Madras)

14:00 Understanding AC losses in state-of-the-art superconducting cables: Physics insights from 2D to 3D computational modelling - Matthew Clegg

14:00 Temperature uniformity characterization in heat treatment of the Nb3Sn coils for nuclear fusion - Bingkun Lyu (Songshan Lake Materials Laboratory)

14:00 Thermal conductivity of REBCO tapes with different stabilizers at 4.2 – 200 K - Jun Lu

14:00 Investigating the Electromechanical Performance of REBCO Tapes for High-Field Magnet Applications - Aniket Ingrole (National High Magnetic Field Laboratory (NHMFL), Florida State University)

14:00 RF response of REBa2Cu3O7-x coated conductors under high magnetic fields - IRFAN AHMED Not Supplied

14:00 Research and development of 650 MHz superconducting cavity for CEPC - Peng Sha (IHEP)

14:00 Field-induced phase transition, weak ferromagnetism, and metamagnetic transition in the underdoped PrBCO cuprate - Mahieddine Lahoubi (Badji Mokhtar Annaba University)

14:00 Characteristics of the Critical Current Capabilities of an Stepped Grooves Structure Superconducting Conductor with Stacked REBCO Tapes - Junfeng Yang (Beijing Jiaotong University)

14:00 Design and Electromechanical Properties of HTS Twisted Stacked-Tape Conductor with Three Stepped Slots - Junfeng Yang (Beijing Jiaotong University)

14:00 Superconductor – Insulator Transition in Sputtered ZrNxOy Thin Films Induced by Tuning RF Power - Zhen Geng (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

14:00 Performance investigation of multilayer insulation structures with variable metal coating - wenjie zhou
15:30 Coffee & Tea break
Coffee & Tea break
15:30 - 16:00
Room: Exhibition & Posters area
16:00 Superconductivity for Aircraft (plenary 5)
Superconductivity for Aircraft (plenary 5)
16:00 - 16:45
Room: Room D
Contributions

16:00 Electrification of Aviation Propulsion – Cryogenic Technologies that enable the Next Generation of Propulsion Systems - Rod Badcock
16:45 Cryogenics for Energy (plenary 6)
Cryogenics for Energy (plenary 6)
16:45 - 17:30
Room: Room D
Contributions

16:45 Cryogenics for power and energy: a winning ticket? - Pierre Crespi (Air Liquide)
17:30 Conference Closing: Numbers, Acknowledgements and Next conference in Korea
Conference Closing: Numbers, Acknowledgements and Next conference in Korea
17:30 - 18:00
Room: Room D

18:30 Cocktail and Conference Banquet in Town
Cocktail and Conference Banquet in Town
18:30 - 22:30
Room: Restaurant
Friday 26 July 2024

09:00

09:00 - 12:30

12:45 End of conference
End of conference
12:45 - 13:00

Choose timezone