ISOLDE Technical Coordination Meeting

→ Europe/Zurich
508/1-001 (CERN)

508/1-001

CERN

20
Show room on map
Zoom Meeting ID
69900009564
Host
Joachim Vollaire
Useful links
Join via phone
Zoom URL
    • 14:00 → 14:05
      Minutes and introduction 5m

      Minutes (minor correction received from C. Duchemin)
      Review of agenda
      Any special to discuss before
      Reminder from IEFC and CERN wide coordination. Activities for LS3 (projects...) must be entered in plan, especially when support from central groups is required.
      Reminder to announced cabling and decabling requests respecting deadldines specified by EN-EL

    • 14:05 → 14:15
      Update on YETS activities in the primary areas 10m

      Frontend maintenance
      Semgrid exchange
      Target patch panel
      Compressed air patch panel

    • 14:15 → 14:20
      Operation Report 5m
      Speakers: Alberto Rodriguez (CERN), Eleftherios Fadakis (CERN), Emiliano Piselli (CERN), Erwin Siesling (CERN), Joachim Vollaire (CERN), Miguel Luis Lozano Benito (CERN), Simon Mataguez (CERN)
    • 14:20 → 14:30
      RILIS 10m
      Speakers: Cyril Bernerd (CERN), Katerina Chrysalidis (CERN), Reinhard Heinke (CERN)
      • laser window changes perfomed by Cyril for both GPS and HRS on Wednesday 06.03.2024
      • thanks to Alex for helping!
      • nothing contaminated
      • window change procedures under revision -> Kati took photos to add to the updated procedures
      • tracing of light cone for alignment outstanding: requires hot surface ion source
      • Single Mode Edgewave will be sipped back to CERN this week 
      • CW OPO laser for negative ion run will arrive ~next week and will be installed in RILIS
    • 14:30 → 14:40
      MEDICIS & Building 179 10m
      Speakers: Charlotte Duchemin (CERN SY/STI/RBS), Laura Lambert (CERN), Ralf Erik Rossel (CERN)

      The MEDICIS Front-end maintenance happened last week on Wednesday and on Thursday. The electrode felt inside S3 when removed but the situation was quickly and efficiently (thanks to RP ) fixed and we could proceed with the maintenance within the two days. The floor of S3 is free of contamination.

      This week, on monday, we had Guillermo (from Jose Somoza's section) accessing S3 to check the good functionning of the vacuum pumps. Everything is ok.

      The rest of the week is reserved for the robot team to make the final Robots before the DSO tests and sign the beam permit.

      Next week we will have the patch panel connection by Julien Parra-Lopez with support of Melania and Stefano. Julien will also configure the remote start of the HV.

      Wedneday, Thursday and Friday of next week is reserved for RP to check the RP monitors in view of the restart of the facility.

       

      Xavier Decrand (EN-CV) continue working on the purge system.

       

    • 14:40 → 14:45
      Targets and Schedule 5m
      Speakers: Hanne Heylen (CERN), Mia Au, Sebastian Rothe (CERN)

      Schedule until mid-June published. Detailed version will become available on EDMS: https://edms.cern.ch/ui/#!master/navigator/project?P:1765981094:101490948:structure, should be used as a reference for technical teams.

      Will start next part of the schedule until end of August next week, feedback on the process welcome.

       

      Targets:

      • Production

      #851-Pa_Sample-VD5 to be calibrated tomorrow
      #849-Ta-VD5 material being produced this afternoon, ready for outgassing 

       

      - For startup

      Plasma on GPS
      #837-UC-VD5 (has the sulfur dispenser)


      Surface on HRS
      HRS : #593
      W -surface (better visibility could help alignment on HRS)
      Mass markers: Rb, K, Na, Sm

       

    • 14:45 → 14:50
      Safety 5m

      Reception fire detection - alarms

      Speakers: Alexandre Dorsival (CERN), Elodie Aubert (CERN), Nadine Conan (CERN), Simon Mataguez (CERN)
    • 14:50 → 14:55
      AOBs 5m

      SIS tests : interlock with beam instrumentation to be scheduled
      REXTRAP update (email F. Wenander)