Seoul National University
Author in the following contributions
- Thu-Mo-Po.04-08: Performance Evaluation of Electrically-condctive Epoxy Composite in Racetrack HTS Coil Applications
- Sat-Mo-Po.08-10: Experimental study of the solderless joint on solenoid magnet with radial pressure structure
- Fri-Mo-Po.09-02: Test and Analysis of Feasibility for HTS Magnet in SMES Applications Using High-frequency Switching Power Electronics Circuits
- Wed-Af-Po.04-08: Design, fabrication, and experiment of roller shaped high-temperature superconducting coil joint apparatus
- Fri-Mo-Po.01-03: Characterizing the effects of distributed time constants and screening currents on the voltage responses of no-insulation HTS coils
- Wed-Mo-Po.09-04: Development and Testing of High Temperature Superconducting Vertically Stacked Cable for Fusion Applications
- Thu-Mo-Po.06-02: Study on mechanical movements of HTS coils due to winding and thermal effect
- Thu-Mo-Po.04-05: Effect of graded insulation on the performance of HTS pancake coils
- Sat-Mo-Po.04-04: Effect of the type of solder flux on high-temperature superconductor tape under time-varying conditions
- Thu-Mo-Po.06-03: Optimization of partial surface friction in GdBCO tapes for mitigating Lorentz force-induced stress in high-field magnets
- Wed-Mo-Po.09-01: Trial fabrication report on twisted and simply stacked HTS cable by using individual equipment
- Sat-Mo-Po.05-03: Effect of Screening Current on Stability of REBCO Magnets
- Wed-Af-Po.04-03: Aging effects in (RE)B2C3O7-d tapes solder joints made with indium-tin
- Fri-Mo-Po.01-02: Stochastic analysis on the factors affecting critical current and index value of multi-tape co-wound NI HTS coil
- Wed-Mo-Po.09-07: Electro-mechanical and thermal characterization of simply-stacked REBCO flat cable for fusion magnet
- Thu-Af-Po.11-06: Cooling Experiment of High-Temperature Superconducting Magnet Components (Parts of a 20 T Magnet)
- Wed-Mo-Po.09-03: A study on inter-strand resistance of Vertically Stacked Tape (VST) cable
- Thu-Mo-Po.09-08: Development and evaluation of mechanical reinforcement strategies for REBCO racetrack coils using a custom test rig
- Sat-Mo-Po.04-03: Thermal/electrical characteristics of ice-impregnated coils enhanced with ethanol and Zylon filler
- Thu-Mo-Or2-07: Conduction cooling test of salient-pole no-insulation HTS field winding for synchronous motor
- Wed-Af-Or2-02: Investigation of Contact Resistivity Dependent Quench Behaviors for Inductive-Type Quenches in No-Insulation HTS Coils
- Wed-Af-Or3-02: Assembly and Test results of Cryogen-free Conduction Cooled Wavelength Shifter Magnet in Final Cryostat
- Thu-Mo-Po.06-01: [Invited] A study on multiscale modelling of REBCO toroid field coil
