|
|
|
8:30 AM
|
Forum Session 2
-
Eric Anderssen
(Lawrence Berkeley National Lab (US))
Georg Viehhauser
(University of Oxford (GB))
(until 12:30 PM)
|
|
8:30 AM
|
The iVTX for the Belle II VTX upgrade project
-
Julien BONIS Mr
Dominic Howgill
(University of London (GB))
|
|
8:50 AM
|
The outer vertex of the Belle II VTX upgrade project
- Ms
Margherita Rovini
(INFN Pisa)
Maurizio Massa
(Universita & INFN Pisa (IT))
|
|
9:10 AM
|
Mechanics for the VELO Upgrade 2
|
|
9:30 AM
|
Developments in 3D printed substrates for cooling of the LHCb VELO Upgrade II modules
-
Yutaro Takahashi
(Nikhef National institute for subatomic physics (NL))
|
|
9:50 AM
|
The upgrade of the silicon tracking detector at AMS-02
- Mr
Xuhao Yuan
(Institute of High Energy Physics, Beijing, China)
|
|
10:15 AM
|
--- Coffee Break ---
|
|
10:35 AM
|
ATLAS ITk Global Mechanics: Design Overview and Lessons Learned During Construction
-
Todd Claybaugh
(Lawrence Berkeley National Lab. (US))
|
|
11:00 AM
|
The electrical isolation challenges of the module-to-cell interface in the ATLAS ITk Pixel Outer Barrel.
-
Diego Alvarez Feito
(CERN)
|
|
11:30 AM
|
Joining and manufacturing processes for detector cooling applications
-
Thomas Demaziere
(CERN)
|
|
11:50 AM
|
Quality Control of CO2 Detector Circuits for the CMS Phase II Upgrades at CERN
-
Derek Jan Langedijk
(CERN)
|
|
12:10 PM
|
Vascular networks embedded in carbon composites: material characterisation and compatibility studies
-
Roberto Prieto Garcia
(CERN)
|
|
|
8:25 AM
|
Forum Session 4
-
Paolo Petagna
(CERN)
Bart Verlaat
(CERN)
(until 12:35 PM)
|
|
8:30 AM
|
Commissioning Status and Performance of 2PACL CO₂ Cooling Systems for the ATLAS and CMS Phase-2 Detector Upgrades
-
Youri Penders
|
|
8:50 AM
|
Early results from the Surface Storage
-
Viren Bhanot
(CERN)
|
|
9:10 AM
|
Lessons learned from ATLAS and CMS 2PACL CO2 cooling systems installation for both mechanics and controls.
-
Jerome Daguin
(CERN)
Lukasz Zwalinski
(CERN)
|
|
9:40 AM
|
Thermal and Pressure Drop Testing Campaigns of CO₂ Detector Transfer Lines for the CMS experiment
-
Levent Kilinc
(CERN)
|
|
10:05 AM
|
--- Group Photo & Coffee Break ---
|
|
10:35 AM
|
Experimental testing of a TBPX cooling manifold: validation of the capillary design methodology
- Mr
Lorenzo Bistoni
(Universita e INFN, Perugia (IT))
Pier Filippo Cianchetta
(CERN)
|
|
11:00 AM
|
A Predictive Model for Dryout Onset in Milli Scale CO₂ Two Phase Cooling Channels
- Dr
Joe Dawe
(University of Bath (GB))
|
|
11:20 AM
|
Experimental investigation of saturation temperature and pipe roughness effects on CO2 microchannel flow boiling for detector cooling
-
Gian Marco Cioffi
(Universita e INFN, Perugia (IT) and CERN)
Giacomo Antonini
(Università degli Studi di Perugia and CERN)
|
|
|
8:30 AM
|
DRD8 Session 2
-
Cristiano Turrioni
(INFN, Sezione di Perugia (IT))
Nicola Pacifico
(CERN)
Sushrut Rajendra Karmarkar
(Purdue University (US))
(until 12:30 PM)
|
|
8:30 AM
|
Introduction WP2
-
Cristiano Turrioni
(INFN, Sezione di Perugia (IT))
Nicola Pacifico
(CERN)
Sushrut Rajendra Karmarkar
(Purdue University (US))
|
|
8:40 AM
|
Performance Targets for Multi-Functional Structures in Future Tracking Detectors
-
Giorgio Vallone
(Lawrence Berkeley National Lab. (US))
|
|
9:00 AM
|
Ultra-light mechanics for a large-area silicon tracker at FCC-ee
-
Giada Bonini
(Universita e INFN, Perugia (IT))
|
|
9:20 AM
|
Prototyping and qualification of ultra-light ladders for the CMS TBPX L1 upgrade in preparation for a future replacement
-
Pier Filippo Cianchetta
(Universita e INFN, Perugia (IT))
|
|
9:40 AM
|
Innovative mechanical structures via Additive Manifacturing
-
Giorgio Chiarelli
(INFN Sezione di Pisa,)
|
|
10:00 AM
|
Design, Fabrication, and Testing of an Extremely Low Material Budget Carbon Fiber Triangular Truss
- Dr
Xiaohui Qian
(IHEP.CAS)
|
|
10:20 AM
|
--- Coffee Break ---
|
|
10:40 AM
|
Development of a material knowledge base for High Energy Physics Experiments
-
Nicola Pacifico
(CERN)
|
|
11:00 AM
|
Active vibration control of detector structures
-
Finn Barber
(University of Oxford)
|
|
11:20 AM
|
Mechanical Performance of Carbon Fibre Composites After Proton Irradiation: Tensile Testing of Unidirectional and Woven Laminates
-
Todd Slater
(University of Oxford (GB))
|
|
11:40 AM
|
Measuring Electrical Resistivity of the CMS TFPX Carbon Fiber Support Structures
-
Christine Angela McLean
(The State University of New York SUNY (US))
|
|
12:00 PM
|
Low Mass Carbon Composites with Integrated Thermal Pathways
-
Sushrut Rajendra Karmarkar
(Purdue University (US))
|
|
|
8:30 AM
|
DRD8 Session 4
-
Diego Alvarez Feito
(CERN)
Corrado Gargiulo
(CERN)
(until 10:30 AM)
|
|
8:30 AM
|
Introduction to WP4 and WP1 Project 2
-
Corrado Gargiulo
(CERN)
Diego Alvarez Feito
(CERN)
|
|
8:40 AM
|
Robotic Radiation Survey and Localization Technology for The Experimental Hall
-
Haoyu Shi
(Chinese Academy of Sciences (CN))
|
|
9:00 AM
|
Mobile Mesh Networks
-
Paolo Francesco Scaramuzzino
|
|
9:20 AM
|
Adaptive Robotic Intelligence for the Sustainable Lifecycle and Automated Decommissioning of Future Tracking Systems
-
Carolin Benjamins
(RWTH Aachen)
|
|
9:40 AM
|
Learning from Demonstration for Robotic Disassembly
-
Carolin Benjamins
(RWTH Aachen)
|
|
10:00 AM
|
Looking ahead
-
Burkhard Schmidt
(CERN)
|
|
10:20 AM
|
Farewell
-
Fabrizio Palla
|
|
10:30 AM
|
DRD8 Collaboration Board
(until 12:00 PM)
|
|
10:30 AM
|
Indico Link to the agenda
|
|
|
3:00 PM
|
Forum Session 1
-
Fabrizio Palla
(Universita & INFN Pisa (IT))
Burkhard Schmidt
(CERN)
(until 7:00 PM)
|
|
3:00 PM
|
Welcome and Organizational Information
-
Fabrizio Palla
(Universita & INFN Pisa (IT))
|
|
3:15 PM
|
Integration of the low-mass, vacuum-operating CBM Micro Vertex Detector
-
Franz Matejcek
(Goethe-Universität Frankfurt, Institut für Kernphysik)
|
|
3:35 PM
|
Production-phase assembly, integration and metrology of the CBM Silicon Tracking System
-
Maksym Teklishyn
|
|
3:55 PM
|
CHeT: A Cylindrical Helical scintillating-fiber Tracker for MuEDM Experiment
-
Daniele Pasciuto
(Sapienza Universita e INFN, Roma I (IT))
|
|
4:15 PM
|
Mechanical Design of the muEDM TPC
-
Daniele Pasciuto
(Sapienza Universita e INFN, Roma I (IT))
|
|
4:30 PM
|
Next forum advertisement
|
|
4:35 PM
|
--- Coffee Break ---
|
|
4:55 PM
|
Mechanical Design and Stability Systems of the MUonE Tracking Detector
-
Anna Driutti
(Universita & INFN Pisa (IT))
|
|
5:20 PM
|
Mu3e helium cooling – system performance, humidity control, and optimization for future operation
- Dr
Thomas Theodor Rudzki
(Physikalisches Institut Heidelberg)
|
|
5:40 PM
|
Ultra-Light Mechanical Support Structures for the Mu3e Outer Pixel Tracker
-
Ashley Ellen McDougall
(The University of Oxford)
|
|
6:00 PM
|
A Straw Tube Tracker (STT) for the DUNE Near Detector Complex
-
Saverio Mameli
(INFN Pisa (IT))
|
|
6:30 PM
|
Full-scale thermo-mechanical prototypes for the ePIC OB stave and studies of active vibration damping in airflow-cooled detector structures
-
Georg Viehhauser
(University of Oxford (GB))
|
|
7:00 PM
|
--- Welcome reception ---
|
|
|
12:30 PM
|
--- lunch ---
|
|
3:00 PM
|
Forum Poster Session
(until 3:30 PM)
|
|
3:00 PM
|
Phase 2 automatic commissioning using auto scan
-
Loic Davoine
(CERN)
|
|
3:00 PM
|
Thermal Performance and Radiation Tolerance of Adhesives for the CMS Phase-2 Pixel Barrel Mechanics
-
Andrei Starodumov
(Rudjer Boskovic Institute (HR))
|
|
3:05 PM
|
CMS capillaries production for LHC High Luminosity upgrade
-
Konrad Wladyslaw Szczyrbak
(Tadeusz Kosciuszko Cracow University of Technology (PL))
Arianna Eugeni
(Universita e INFN, Perugia (IT))
|
|
3:05 PM
|
Manufacturing of tool based interposers for the ATLAS Inner Tracker Modules
- Mr
Sören Ahrens
(Deutsches Elektronen-Synchrotron (DE))
|
|
3:10 PM
|
Thermal Quality Control of TB2S Ladders for the CMS Phase-2 Tracker Upgrade
-
Pier Filippo Cianchetta
(CERN) Mr
Lorenzo Bistoni
(Universita e INFN, Perugia (IT))
|
|
3:15 PM
|
Mighty-SciFi Cryo Demonstrator for LHCb Upgrade II
-
Gauri Napoletano
(EPFL - Ecole Polytechnique Federale Lausanne (CH))
|
|
3:15 PM
|
Vibration mitigation: cantilever spring blades for vertical seismic attenuation in GW interferometers
-
Leonardo Lucchesi
(INFN Pisa)
|
|
3:25 PM
|
CMS Phase 2 Tracker Service Channel: Thermal Performance and Simulation Results
-
Bartosz Grygiel
(CERN)
|
|
3:25 PM
|
Conceiving an anti-vibration mechanical system on the experience of the Superattenuator for Gravitational Waves detectors: present and future performance
- Dr
Franco Frasconi
(INFN Pisa)
|
|
3:30 PM
|
Forum Session 3
-
Antti Onnela
(CERN)
Andreas Werner Jung
(Purdue University (US))
(until 7:30 PM)
|
|
3:30 PM
|
All hands on deck at DESY - Building the ATLAS and CMS end-caps for the Phase-2 Upgrade
-
Jan-Hendrik Arling
(Deutsches Elektronen-Synchrotron (DE))
|
|
4:00 PM
|
Carbon Composite Support Wheel for HL-LHC CMS Tracker TB2S Detector
-
Philippe Lenoir
(CERN)
Marc KRAUTH
|
|
4:30 PM
|
CMS Phase 2 Tracker Barrel Pixel: Mechanic Assembly and Integration, tools and QC
-
Daniele Benvenuti
(Universita & INFN Pisa (IT))
|
|
5:00 PM
|
HL-LHC CMS Outer Tracker Endcap Double Disks (TEDDs): The First Experience of Integration and Test of Silicon Modules on “Dee” Structures
-
Semra Turkcapar
(Universite Catholique de Louvain (UCL) (BE))
|
|
5:30 PM
|
--- Coffee Break ---
|
|
5:50 PM
|
Composite Design, Manufacturing and FEA modelling lessons from the Inner Tracker Support Tube for HL-CMS
-
Sushrut Rajendra Karmarkar
(Purdue University (US))
|
|
6:10 PM
|
Repair Campaign of the CMS Barrel Timing Layer - Tracker Support Tube, the BTST
-
Pierre Rose
(CERN)
|
|
6:30 PM
|
Thermal studies of the CMS Endcap Timing Layer cooling system
-
Mihailo Lukovic
(CERN)
|
|
7:00 PM
|
The CMS TEPX detector for the Phase-2 Inner Tracker Upgrade: Thermal Performance and Simulation Results
-
Yann Herpin
(University of Zurich (CH))
|
|
8:00 PM
|
--- Social Dinner ---
|
|
|
12:35 PM
|
--- lunch ---
|
|
3:00 PM
|
Presentations from Companies
(until 3:30 PM)
|
|
3:30 PM
|
DRD8 Session 1
-
Fabrizio Palla
(Universita & INFN Pisa (IT))
Burkhard Schmidt
(CERN)
Corrado Gargiulo
(CERN)
(until 8:00 PM)
|
|
3:30 PM
|
Introduction DRD8
-
Burkhard Schmidt
(CERN)
|
|
3:40 PM
|
Introduction WP1
-
Fabrizio Palla
(Universita & INFN Pisa (IT))
|
|
3:50 PM
|
Status of the FCC-ee MDI full-scale mockup
-
Manuela Boscolo
(INFN e Laboratori Nazionali di Frascati (IT)) Dr
Andrea Moggi
(Universita & INFN Pisa (IT))
|
|
4:10 PM
|
Ultra-thin beam pipes for FCC-ee
-
Francesco Fransesini
(INFN e Laboratori Nazionali di Frascati (IT))
|
|
4:30 PM
|
Structural Design and Thermal Performance Study of CEPC Beam Pipe Based on an Aluminum Tube Substitution Scheme
-
Xiaoyan Ma
(Chinese Academy of Sciences (CN))
|
|
4:50 PM
|
Large-Scale Curved Sensor Mechanics and Integration for Future Vertex Detectors
-
Bartlomiej Adam Markiel
(CERN)
|
|
5:10 PM
|
Experimental studies for an air cooling system for the FCC-ee inner vertex
-
Gherardo Ammirabile
(Universita & INFN Pisa (IT))
|
|
5:30 PM
|
--- Coffee Break ---
|
|
5:50 PM
|
Mechanical and Integration aspects of the FCC-SEED vertex detector concept
-
Jeremy Andrea
(Centre National de la Recherche Scientifique (FR))
|
|
6:10 PM
|
Overview of the Mighty Tracker Challenges: Material Budget, Tight Envelopes, Installation
-
Ksenia Solovieva
(University of Freiburg (DE))
|
|
6:30 PM
|
Lightweight hardware alignment system requirements and prototyping
-
Todor Georgiev Todorov
(University of Freiburg (DE))
|
|
6:50 PM
|
The LHCb Mighty Tracker: Thermo-mechanical design and prototype testing.
- Mr
Bilal Ganie
(University of Manchester)
|
|
7:10 PM
|
New construction techniques for a fully carbon fiber DCH prototype
-
Salvatore Maggiore
(INFN Lecce e Universita del Salento (IT))
Alessandro Miccoli
(INFN Lecce e Universita del Salento (IT))
|
|
|
12:30 PM
|
--- lunch ---
|
|
2:45 PM
|
DRD8 Poster Session
(until 3:15 PM)
|
|
3:15 PM
|
DRD8 Session 3
-
Oscar Augusto De Aguiar Francisco
(The University of Manchester (GB))
Bart Verlaat
(CERN)
Paolo Petagna
(CERN)
(until 7:00 PM)
|
|
3:15 PM
|
Introduction WP 3
-
Bart Verlaat
(CERN)
Oscar Augusto De Aguiar Francisco
(The University of Manchester (GB))
|
|
3:25 PM
|
Silicon Microchannel Cooling - From Performance Characterization to Detector Applications
-
Jan-Hendrik Arling
(Deutsches Elektronen-Synchrotron (DE))
|
|
3:40 PM
|
Monolithic integration of cooling microchannels in all-silicon ladders for vertex detectors
-
Javier Fernandez-Tejero
(Institut de Microelectrònica de Barcelona (IMB-CNM, CSIC) (ES))
|
|
3:55 PM
|
Studies on the structural resistance of Silicon microchannels
-
Simone Coelli
(Università degli Studi e INFN Milano (IT))
|
|
4:10 PM
|
Design Strategies to Improve CO₂ Boiling Heat Transfer in Silicon Microchannel Heat Sinks
-
Anze Sitar
|
|
4:25 PM
|
Recent Developments in Microchannel Cooling and Interconnection Technologies
-
Bianca Raciti
(Centre National de la Recherche Scientifique (FR))
|
|
4:40 PM
|
Nanofibre-Enhanced Thin Heat Pipes for Thermal Management of Silicon Pixel Detectors (HENAPIX project): Concept, Fabrication Approach and Preliminary Numerical Results
-
Alessandro Mariotti
(Università & INFN Pisa (IT))
|
|
4:55 PM
|
--- Coffee Break ---
|
|
5:15 PM
|
Liquid CO2 Jet Impingement Cooling
-
Benjamin Edward Pulver
(Purdue University)
|
|
5:30 PM
|
New Members to DRD8: An Overview of Experimental Capabilities and Infrastructure at the University of Bath
- Prof.
Carl Sangan
(University of Bath (GB))
|
|
5:45 PM
|
AM4CMS – Additive Manufacture for Cooling Manifold Structures: Project Initiation
-
Alexander Lunt
(University of Bath (GB))
|
|
6:00 PM
|
Warm CO2 cooling in compact geometries: sub- and supercritical regimes
- Ms
Camila Pedano-Medina
(CERN)
|
|
6:20 PM
|
A new compressor-ejector cycle concept for detector cooling for both Krypton and CO2.
-
Bart Verlaat
(CERN)
|
|
6:40 PM
|
Research on Krypton cooling for applications between -55°C and -140°C
-
Bart Verlaat
(CERN)
|
|
7:00 PM
|
Farewell event
(until 8:00 PM)
|
|
|
12:00 PM
|
--- lunch ---
|
|
1:00 PM
|
--- Bus departure to Roma FCO airport ---
|
|