-
Roland Garoby (CERN)28/08/2012, 08:30Goals of mid-run reviewGo to contribution page
-
Giovanni Rumolo (CERN)28/08/2012, 08:40• LHC expectations and injectors’ potential performance after LIU • LIU MD activities: initial goals, where we are standing, which additional MDs do we need? Which additional hardware would help (instrumentation, RF, damper…)?Go to contribution page
-
Ana Guerrero Ollacarizqueta (CERN), Dr Bettina Mikulec (CERN)28/08/2012, 09:00• From the PSB with different PS schemes • Preservation of emittances along the chain: importance of transverse damper? • PSB with Linac4 in case of Linac2 failure: do we need PSB MDs?Go to contribution page
-
Alexander Molodozhentsev (High Energy Accelerator Research Organization (JP)), Christian Carli (CERN), Elena Benedetto (CERN), Frank Schmidt (CERN), Michel Martini (CERN), Vincenzo Forte28/08/2012, 09:30• Which brightness can we expect? • Impact of painting scheme? • Spotted resonances that need compensating? Which tools do we need to optimize the compensation (instrumentation, multipoles)?Go to contribution page
-
Alan James Findlay (CERN), Alfred Blas (CERN), Maria Elena Angoletta (CERN), Mauro Paoluzzi (CERN)28/08/2012, 09:50• What else do we need to know to definitively adopt Finemet cavities? When the decision can be made? • What is left to demonstrate with the digital LLRF (e.g. synchronization before transfer, different intensity ranges, test more than one ring)? • Are RF by-passes an issue? • Can some of the new hardware for the transverse damper tested this year?Go to contribution page
-
Alexander Huschauer (Vienna University of Technology (AT)), Frank Schmidt (CERN), Giuliano Franchetti (Gesellschaft fuer Schwerionenforschung mbH (GSI)), Raymond Wasef (Institut National Polytechnique de Grenoble (FR))28/08/2012, 10:40• Is a higher brightness/Q achievable at 1.4 GeV? Perspective at 2 GeV? • Are the tunes enough optimized? Potential of further progress? Need for resonances compensation? • Importance of transverse damper?Go to contribution page
-
Heiko Damerau (CERN), Mauro Migliorati (Universita e INFN, Roma I (IT)), Steven Hancock (CERN)28/08/2012, 11:00• Stability & feedback: what else do we need to know to specify hardware (damper, cavities feedbacks…)? • Impedance measurements: Impact of future additional devices (kickers, cavities, damper…)? Are RF by-passes an issue? • Alternative production schemes • Can we set scenarios to reasonably estimate performance after LS1?Go to contribution page
-
Alfred Blas (CERN), Giovanni Iadarola (Universita e INFN (IT)), Giovanni Rumolo (CERN), Guido Sterbini (CERN), Dr Mauro Pivi (SLAC), Nicolo Biancacci (Universita e INFN, Roma I (IT)), Sandra Aumon (Ecole Polytechnique Federale de Lausanne (CH)), Serena Persichelli (Universita e INFN, Roma I (IT)), Dr Simone Gilardoni (CERN), Vladimir Kornilov (GSI - Helmholtzzentrum fur Schwerionenforschung GmbH (DE))28/08/2012, 11:30• Stability & feedback: what else do we need to know to specify hardware (damper, kickers, correctors, e-cloud mitigation…)? • Sources of losses, emittance growth and instability • Impedance measurements (global and local)Go to contribution page
-
Heiko Damerau (CERN), Helga Timko (CERN), Steven Hancock (CERN)28/08/2012, 12:00• How much can we gain? • With Q20? • What else do we need to know to decide upon additional RF hardware?Go to contribution page
-
Eliana Gianfelice (Fermi National Accelerator Lab. (US)), Glenn Vanbavinckhove (NIKHEF (NL)), Hannes Bartosik (Physics Division), RF team, Yannis Papaphilippou (CERN)28/08/2012, 14:00• Single bunch (space charge and TMCI) & Multi-bunch operation: are the tunes enough optimized? Potential of further progress? Do we understand the present limits? Would it help to test with a better LLRF at 800 MHz? • Deployment of extraction to LHC: what is left to understand?Go to contribution page
-
Fritz Caspers (CERN), Giovanni Iadarola (Universita e INFN (IT)), Giovanni Rumolo (CERN), Hannes Bartosik (Physics Division), Holger Neupert (CERN), Mauro Taborelli (CERN), Michael Rolf Holz (Hochschule Karlsruhe, Technik und Wirtschaft), Silke Federmann (University of Vienna (AT))28/08/2012, 14:30• Observations (beam, pressure) • ECM studies for scrubbing and modeling: what is left to understand? • Progress on a-C coating: what is left to demonstrate? What are the questions?Go to contribution page
-
Elena Chapochnikova (CERN), Juan Federico Esteban Muller, Theodoros Argyropoulos (National Technical Univ. of Athens (GR)), Thomas Bohl (CERN)28/08/2012, 15:00• Requirements for the 800 MHz system • Known instabilities and thresholds • What else do we need to know to estimate performance after LIU?Go to contribution page
-
John D Fox (SLAC National Accelerator Laboratory (US)), John Michael Cesaratto (SLAC National Accelerator Laboratory (US)), Kevin Shing Bruce Li (Eidgenoessische Tech. Hochschule Zuerich (CH)), Wolfgang Hofle (CERN)28/08/2012, 16:00• Which tests can be done before LS1? On which hardware does this depend? • Can we envisage extending it to PS/LHC?Go to contribution page
-
28/08/2012, 16:30• Key pending questions • Which ones can be addressed before the end of the run? • What is required (MD time, machine conditions, equipment…)?Go to contribution page
-
Elena Chapochnikova (CERN), Juan Federico Esteban Muller, Thomas Bohl (CERN)• Known instabilities and thresholds • What else do we need to know to estimate performance after LIU?Go to contribution page
Choose timezone
Your profile timezone: