Speaker
Maria Elena Stramaglia
(Universitaet Bern (CH))
Description
ATLAS is one of the four big LHC experiments and currently its Pixel-Detector is being upgraded with a new innermost 4th layer, the Insertable B-Layer (IBL). The upgrade will result in better tracking efficiency and compensate radiation damages of the Pixel-Detector. Newly developed front-end electronics and the higher than originally planned LHC luminosity will require a complete re-design of the Off-Detector-Electronics consisting of the Back-Of-Crate card (BOC) and the Read-Out-Driver (ROD).
The main purpose of the BOC card is the distribution of the LHC clock to all Pixel-Detector components as well as interfacing the detector and the higher-level-readout optically. It is equipped with three Xilinx Spartan-6 FPGAs, one BOC Control FPGA (BCF) and two BOC Main FPGAs (BMF). The BMF are responsible for the signal processing of all incoming and outgoing data.
The data-path to the detector is running a 40 MHz bi-phase-mark encoded stream. This stream is delayed by a fine delay block using Spartan-6 IODELAY primitives. The primitives are reconfigured using partial reconfiguration inside the FPGA. The 160 MHz 8b10b-encoded data-path from the detector is phase and word-aligned in the firmware and then forwarded to the ROD after decoding. The ROD will send out the processed data which is then forwarded to the higher-level readout by the BOC card.
An overview of the firmware, which has been developed, will be presented together with the results from production tests and the system test at CERN. One focus will be the partial reconfiguration and results of the fine delay measurements.
Primary author
Maria Elena Stramaglia
(Universitaet Bern (CH))
