Name: MT25 Conference 2017 - Timetable, Abstracts, Orals and Posters
Start: 2017-08-27T01:30:00+02:00
End: 2017-09-01T21:30:00+02:00
Location: RAI Congress Center, Amsterdam, The Netherlands

MT25 Conference 2017 - Timetable, Abstracts, Orals and Posters

from Sunday 27 August 2017 (01:30) to Friday 1 September 2017 (21:30)

Monday 21 August 2017
Tuesday 22 August 2017
Wednesday 23 August 2017
Thursday 24 August 2017
Friday 25 August 2017
Saturday 26 August 2017
Sunday 27 August 2017

16:00 Registration Desk Open from 16:00 to 20:30
Registration Desk Open from 16:00 to 20:30
16:00 - 20:30
Room: Building Elicium, use Entrance D

19:00 Welcome Reception
Welcome Reception
19:00 - 20:30
Room: Elicium ball room (1st floor), use Entrance D

Monday 28 August 2017

08:00 Registration Desk Open from 8:00 to 18:30
Registration Desk Open from 8:00 to 18:30
08:00 - 08:20

08:20 Exhibition Open from 9:00 to 18:30
Exhibition Open from 9:00 to 18:30
08:20 - 08:45

08:45 Conference Opening
Conference Opening
08:45 - 09:00

09:00 IEEE Awards Presentation
IEEE Awards Presentation
09:00 - 09:15
09:15 ITER project
ITER project
09:15 - 10:00
Contributions

09:15 Overall Status of the ITER Project - Bernard Bigot (ITER International Organization)
10:00 Break
Break
10:00 - 10:30
10:30 LHC and HL-LHC magnets
LHC and HL-LHC magnets
10:30 - 12:15
Contributions

10:30 Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test - Gijs De Rijk (CERN)

10:45 Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Michinaka Sugano

11:00 Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation - Ezio Todesco (CERN)

11:15 Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC - Fernando Toral (CIEMAT)

11:30 Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan - Massimo Sorbi (Milan University & INFN-LASA)

11:45 Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC - Pasquale Fabbricatore (Universita e INFN Genova (IT))

12:00 A Statistical Analysis of Electrical Faults in the LHC Magnets - Jean-Philippe Tock (CERN)
High-field Magnets
High-field Magnets
10:30 - 12:15
Contributions

10:30 [Invited] Progress in the Construction of the 43 T Hybrid Magnet at LNCMI-Grenoble - Pierre Pugnat (Lab. des Champs Magnet. Intenses (FR))

11:00 [Invited] The commissioning of a hybrid magnet at CHMFL - Yunfei Tan

11:30 [Invited] Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL - Mark Bird (FSU)

12:00 Design of the resistive insert coils for the HFML 45 T Hybrid Magnet - Frans Wijnen (Radboud University Nijmegen)
Mechanical Aspects and Novel Diagnostics
Mechanical Aspects and Novel Diagnostics
10:30 - 12:15
Contributions

10:30 Mechanical–electric Model for Multifilament Composite Superconducting Strands - Yuanwen Gao (Lanzhou University)

10:45 Analytical investigation in bending characteristic of pre-twisted HTS tapes - Wurui Ta (Key Laboratory of Mechanics on Environment and Disaster in Western China, The Ministry of Education of China, Lanzhou, Gansu 730000, P. R. China)

11:00 Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole. - Michael Daly (CERN)

11:15 Structural Behavior of KSTAR CS Magnet during Plasma Operation - Hee-Jae Ahn (NFRI)

11:30 Fatigue failure analysis of a 60T pusled magnet at the WHMFC - Quqin Sun (Institute of Fluid Physics, China Academy of Engineering Physics)

11:45 Real-time functional diagnostics of superconducting magnets using acoustic techniques - Maxim Marchevsky (Lawrence Berkeley National Lab. (US))

12:00 Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF - Giorgio Vallone (CERN)
12:15 Lunch
Lunch
12:15 - 13:15
13:15 Nb3Sn Magnets for HL-LHC and other Applications
Nb3Sn Magnets for HL-LHC and other Applications
13:15 - 15:00
Contributions

13:15 Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC - Lucio Fiscarelli (CERN)

13:15 Quench Location in the LARP MQXFS1 prototype - Giorgio Ambrosio (Fermilab)

13:15 Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC - Susana Izquierdo Bermudez (CERN)

13:15 Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil. - Joseph F Muratore (Brookhaven National Laboratory)

13:15 Beam Trajectory Simulation Considering Each Harmonic Components in HTS Quadruple Triplet - zhan zhang (Uiduk University)

13:15 Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source - Mariusz Juchno (LBNL)

13:15 Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training - Etienne Rochepault (CERN)

13:15 Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement - Arnaud Foussat (CERN)

13:15 Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC - Friedrich Lackner (CERN)

13:15 Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil - Marco Breschi (University of Bologna, Italy)

13:15 Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC - Lucio Fiscarelli (CERN)
Detector Magnets
Detector Magnets
13:15 - 15:00
Contributions

13:15 A passively shielded HTS magnet for polarized neutron scattering - Donald Pooke (HTS-110)

13:15 Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles - Amaury PORHIEL (Sigmaphi)

13:15 FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system - Helder F. P. Silva

13:15 Magnet System for the BabyMIND Neutrino Detector at J-PARC - Alexey Dudarev (CERN)

13:15 Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN - Erwin Roland Bielert (Univ. Illinois at Urbana-Champaign (US))

13:15 Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab - paul brindza (jeffersonLab)

13:15 OPTIMIZATION, DESIGN AND OPERATION ASSESSMENT OF A MULTIPURPOSE DETECTOR FOR NICA COLLIDER - Martina Neri (ASG Superconductors s.p.a.)

13:15 Status of Design and Manufacturing of PENELOPE neutron trap - Cristian Boffo (Babcock Noell GmbH)

13:15 Development of conductors for thin solenoids for ultra radiation-transparent detector magnets - Tobias Kulenkampff (Vienna University of Technology (AT))
HTS Inserts and Model Magnets
HTS Inserts and Model Magnets
13:15 - 15:00
Contributions

13:15 Controllability of the contact resistance of 2G HTS coil with metal insulation - Myung-Hwan Sohn (Korea Electrotechnology Research Institute)

13:15 Cryo-free multisection superconducting magnetic system with MgB2 coil - Dmitry Abin (NRNU MEPhI)

13:15 Optimal Design Methodology of Multi-Width HTS Magnet - Min Cheol Ahn (Kunsan National University)

13:15 Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging - Jae Young Jang (Korea Basic Science Institute)

13:15 A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study - Jiho Lee (Massachusetts Institute of Technology)

13:15 Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K - Kyle Radcliff (Applied Superconductivity Center-NHMFL)

13:15 Quench Behaviour of Bi2Sr2CaCu2O8+x insert coils for high field magnets - Steven Ball (Oxford Instruments)
Motors - I
Motors - I
13:15 - 15:00
Contributions

13:15 Electromagnetic Analysis on Dual-Stator Switched Reluctance Motor - Hao Chen (China University of Mining & Technology)

13:15 Design of Dual-Channel Switched Reluctance Motor for Safety-Critical Applications Using Two 3-Phase Standard Inverters - Qian Chen (Jiangsu University)

13:15 Analysis of Magnetic Polarity Distribution for a Dual-rotor Switched Reluctance Machine - Hao Chen (China University of Mining & Technology)

13:15 Analytical Polynomial Models of Nonlinear Magnetic Flux Linkage for Switched Reluctance Motor - Hao Chen (China University of Mining & Technology)

13:15 A Synthetic Frozen Permeability Method to Separate PM torque in Hybrid Permanent Magnet Variable-Flux Machine - Meng Ge (Huazhong University of Science & Technology)

13:15 A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system - Kyoung-Jin Joo Gang Seok Lee (Hanyang Univ.)

13:15 High Efficiency Permanent Magnet Linear Synchronous Motor - Jian Li (Huazhong University of Science & Technology)

13:15 Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System - JONGSUK LIM (Hanyang university) Gang Seok Lee (Hanyang Univ.)

13:15 Estimation of Permanent Magnet Temperature using d-axis Current for IPMSM - Chang-Sung Jin (Hanwha Techwin)

13:15 Design and Initial Results of a Novel in-situ A.C. loss Measurement in Axial Flux Synchronous Machine - Jay Patel (University of Bath)

13:15 A transverse flux single-phase tubular switched reluctance linear motor - Hao Chen (China University of Mining & Technology)

13:15 Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region - Tae-Yong Lee (Sungkyunkwn Univ)

13:15 Proposed Commutation Method for Performance Improvement of Brushless DC Motor - Chang-Sung Jin (Hanwha Techwin)

13:15 Optimization of the Pole Piece in Coaxial Magnetic Gears for Transfer Torque Ripple Improvement - Sung-Jin Kim (Chosun University)

13:15 Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet - Jin-Seok Kim (SUNGKYUNKWAN UNIVERSITY)

13:15 Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit - Jae-Kwang Lee (hanyang university)

13:15 Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet - Tae-Yong Lee (Sungkyunkwn Univ)

13:15 Flux Characteristics Analysis of a Single-phase Tubular Switched Reluctance Linear Motor - Hao Chen (China University of Mining & Technology)

13:15 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device - Ji Hyung Kim (Jeju National University)

13:15 A Multi-Phase Doubly-Fed Doubly-Salient HTS Linear Motor for Vertical Transportation - Rui Li (Shenzhen University)

13:15 A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system - Kyoung-Jin Joo Gang Seok Lee (Hanyang Univ.)

13:15 A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density - JONGSUK LIM (Hanyang university)

13:15 Design and Analysis of A Novel Modular-Stator Tubular Vernier Permanent-Magnet Machine - Tian Yao (School of Electrical and Information Engineering, Jiangsu University)

13:15 Effect of Multi-phase Winding on Surface Permanent-Magnet Machine with Low Space Harmonics for Electric Steering Gear - Junqiang Zheng (Jiangsu university)

13:15 SynRM Rib optimal Design method for High-Power Density - Jae-Kwang Lee (hanyang university)
Magnetic Levitation and Bearings
Magnetic Levitation and Bearings
13:15 - 15:00
Contributions

13:15 Levitation and guidance forces of CC-tape stacks - Maxim Osipov (NRNU MEPhI)

13:15 Dynamic Responses of Stacked coated conductor tapes Levitated above a Permanent Magnet Guideway - Kun Liu

13:15 Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry - Xiaoyan Diao (Jiangsu University)

13:15 Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor - Chunyan Cui (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:15 Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection - Yuemei Qin (Jiangsu university)

13:15 Decoupling Control Based on Linear/Nonlinear Active Disturbance Rejection Switching for 3 Degrees of Freedom HMB - Chenyin Zhao

13:15 Capacity Allocation of a Superconducting Flywheel Storage System (SFES) in Hybrid Energy Storage System for Wind Generation - Rakkyung Ko (Korea University)

13:15 Levitation Performance of Bulk YBCO and GdBCO Under a Low-Pressure Condition - Yong Zhang (Southwest Jiaotong University)

13:15 Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model - Yuemei Qin (Jiangsu university)

13:15 A Superconducting Linear Variable Reluctance Machine for Urban Transportation Systems - T.W. Ching (University of Macau)
Transformers and SMES
Transformers and SMES
13:15 - 15:00
Contributions

13:15 Manufacture and tests of a 1 MJ HTS Magnet for a SMES-FCL - Jingye Zhang (Institute of Electrical Engineering，Chinese Academy of Sciences)

13:15 Step-current method for improving energy storage density of superconducting magnet - Yalan Huang (sichuan university)

13:15 Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method - Zuoshuai Wang

13:15 Test Winding of a 1-T Class Force-Balanced Coils Using High Temperature Superconducting Tapes - Hiroharu Kamada (Meiji University)

13:15 Conceptual Design and Evaluation of a HTS Magnet for a SMES Used in Improving Transient Performance of a Grid-Connected PV System - Lei Chen (Wuhan University)

13:15 Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method - Le Deng (Wuhan National High Magnetic Field Center)

13:15 Superconducting properties of Prototype Pancake Coil using MgB2 Cable - Masaru Tomita (Railway Technical Research Institute)

13:15 Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device - Shinya Mizuno (Sophia Univ.)
Novel and Space Applications
Novel and Space Applications
13:15 - 15:00
Contributions

13:15 Analysis and Optimal Design of the Transmission Coils for the Wireless Power Transmission System - lantao huang

13:15 Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test - Jiawei Wu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Asymmetry in wireless power transfer between a superconducting coil and a copper coil - Hui Yu (Institute of Electrical Engineering Chinese Academy of Science; University of Chinese Academy of Science ) Zhang GuoMin (Institute of Electrical Engineering Chinese Academy of Science)

13:15 Optimization Design of a Permanent Magnetic Actuator for 126kV Vacuum Circuit Breaker - Jiaming Jiang

13:15 Enhancement of trapped magnetic field using a large-size REBCO bulk in a desktop type superconducting bulk magnet - Kazuya Yokoyama (Ashikaga Institute of Technology)

13:15 Design of maximum power density of TVC driving motor for space launch vehicle considering space environment - Hyun-Woo Jun (Hanyang University)

13:15 Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils - NOA PARK (Chosun University)

13:15 Design of the Conduction-cooled YBCO Magnet for a MW Class Induction Heating System - Dong Zhang (Institute of Electrical Engineering, Chinese Acadmy of Sciences)

13:15 Characteristics of SWPT according to the number of transmitting and receiver coils. - In-Sung Jeong (Chosun University)
Low-Tc Wires and Cables
Low-Tc Wires and Cables
13:15 - 15:00
Contributions

13:15 Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications - Masahiro Sugimoto (Furukawa Electric Co., Ltd.)

13:15 Enhanced critical current densities in Nb3Sn superconducting strands prepared by bronze process - Ke Zhang (Western Superconducting Technologies Co. Ltd.)

13:15 Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla - Chris Kovacs (The Ohio State University)

13:15 Superconducting properties and microstructure of high performance Nb3Al wires fabricated by RHQT and mechanically alloyed methods - Yong Zhao

13:15 Ongoing efforts at internal-tin Nb3Sn strand with higher Jc and lower Qh for fusion application - Jianwei Liu (Western Superconducting Technologies, Co. Ltd.)

13:15 Low loss NbTi Superconducting Wires for the SIS100 Main Magnets made by Luvata - Mikael Holm (Luvata Pori Oy)

13:15 Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables - Ted Collings (MSE, The Ohio State University)

13:15 Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid - Vito Lombardo (Fermilab)

13:15 Changes of superconducting properties due to the unidirectional tensile deformation on bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn ternary alloy matrices - Yoshimitsu Hishinuma (National Institute for Fusion Science)

13:15 A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand - Jiman Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 Evaluation of thermal strain induced on components of Nb3Sn strand during cool down - Tomone Suwa (National Institutes for Quantum and Radiological Science and Technology)

13:15 Irreversible strain characteristics of technical RHQT Nb3Al superconductors - Nobuya Banno (National Institute for Materials Science)

13:15 Superconducting properties of Nb3Al wires prepared with rapid heating, quenching and transformation method - Chuan Chen (Western Superconducting Technologies Co.)
Joints between Superconductors, Leads and Links
Joints between Superconductors, Leads and Links
13:15 - 15:00
Contributions

13:15 Design, Testing and Commissioning of 25.7 kA HTS Current Leads - Guido Consogno (WEKA AG)

13:15 Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results - Francois-Paul Juster (CEA)

13:15 Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet - Jiman Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 Optimization of 2G HTS Current Leads Working at External Magnetic Field - Vasily Zubko (Russian Scientific R&D Cable Institute)

13:15 MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations - Giovanni Valesi (ASG superconductors SpA)

13:15 Design of the internal embedded joints for the EU DEMO TF coils - Aldo Di Zenobio (ENEA)

13:15 Performance of a HTS Persistent Current System for REBCO pancake coil - Kohki Takahashi (IMR, Tohoku University)

13:15 Superconducting joints made using internal Mg diffusion (IMD)-processed MgB2 wires - Akiyoshi MATSUMOTO (NIMS)

13:15 Overview of JT-60SA HTS current lead manufacture and testing - Reinhard Heller (Karlsruhe Institute of Technology)

13:15 Development of 52 kA HTS Current Leads for the ITER CS Magnet Test Application - Kaizhong Ding (Institute of Plasma Physics, Chinese Academy of Sciences)

13:15 Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K - Zinour Charifoulline (CERN)

13:15 Manufacturing and Qualification Test of ITER Busbar Joint - Hyungjun Kim (ITER Organization)

13:15 Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method - Yoshinori Yanagisawa (RIKEN)

13:15 Lead-free persistent mode joints between NbTi wires - Timothy Davies (Department of Materials, University of Oxford)

13:15 A Prototype of a 500 A class Bi-2223/AgAu Current Lead for a Conduction Cooled Superconducting Magnet - Takehisa Tsurudome (Sumitomo Heavy Industries, Ltd.)

13:15 Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet - Andries den Ouden (Radboud University, Nijmegen, The Netherlands)
Quench and Normal Zone Behavior
Quench and Normal Zone Behavior
13:15 - 15:00
Contributions

13:15 The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests - Andrey Gavrilin (NHMFL - FSU)

13:15 Influence of local critical current degradation on quench characteristics of a ReBCO coil - Momoe IDE (Tohoku University)

13:15 Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment - Kwangmin Kim (National High Magnetic Field Laboratory)

13:15 Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench - Ryosuke Miyao (Hokkaido University)

13:15 Experimental and numerical analysis of quench characteristics on a HTS coil by fault disturbance in HTS generator - Zhen Huang (Shanghai Jiao Tong University)

13:15 Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches - Hugo Bajas (CERN) Jose Vicente Lorenzo Gomez (Centro de Investigaciones Energéti cas Medioambientales y Tecno)

13:15 Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer - Eric Sun (Jefferson Lab)

13:15 Quench propagation measurements on 2 km MgB2 coil up to 4 T. - Christophe Berriaud (CEA Saclay / Irfu)

13:15 Development of Quench Antennas for Quench Detection in Nb3Sn Magnets - Gerard Willering (CERN)

13:15 A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions - Yoon Hyuck Choi (Department of Materials Science and Engineering, Korea University)

13:15 Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator - Anfeng Zhao (Shanghai Jiao Tong University)

13:15 Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique - Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil - Yu Suetomi (RIKEN)
Cryogenics for Magnet Cooling
Cryogenics for Magnet Cooling
13:15 - 15:00
Contributions

13:15 Cryogenic Oscillating Heat Pipe for Conduction-cooled Superconducting Magnets - Qiuliang Wang

13:15 Design and construction of the magnet-cryostat for the SuperKEKB Interaction Region - Norihito Ohuchi (KEK)

13:15 Development of a 1.5 Tesla whole-body MRI Magnet with a very low helium inventory - Adam Johnstone (Siemens Healthcare)

13:15 LOW VIBRATION VAPOUR SHIELDED CRYOSTATS FOR WIDE BORE HIGH FIELD MAGNETS - David Warren (Oxford Instruments)

13:15 Operation of the helium cryogenic system for the hybrid superconducting outsert at CHMFL - Junjie LI (CHMFL)

13:15 Cool-down of LTS magnets by a closed loop helium gas flow - Francesco Dioguardi (DH Industries BV)

13:15 Design and Research of Cryostat for 3W1 SC Wiggler Magnet - Miaofu Xu

13:15 Liquid nitrogen level detection method for the safe operation of onboard cryostats of high-temperature superconducting maglev vehicles under vibration condition - Yong Zhang (Southwest Jiaotong University)

13:15 Design and performance analysis of a cryostat for pulsed high magnetic field using a small scale helium liquefaction system - Mengyu Liu

13:15 Cooling experiment analysis of a prototype thermal siphon system for single crystal ingot growth magnet - Woo Seung Lee (JH Engineering Corp.)

13:15 CRYOGENIC TECHNOLOGIES OF THE NICA ACCELERATOR COMPLEX - Iuliia Mitrofanova (JINR)

13:15 Cryogen Recondensed Cooling System for Electron Beam Ion Source Employing 7 T Superconducting Solenoid Magnet - Su-Hun Kim (Kyungpook National University)

13:15 Thermal characteristics of a prototype HTS quadrupole magnet for In-flight fragment separator of RISP - Heecheol Park (Changwon National University)
Power Converters
Power Converters
13:15 - 15:00
Contributions

13:15 A new three-level repetitive pulse magnetic field power supply system - Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC - Jiangtao Shi (Huazhong University of Science and Technology)

13:15 Development of a new high stability of power supply in the superconducting system - yongseng wong (NSRRC)

13:15 Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field - Zhangfei Zhao (Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)

13:15 Cascaded Multilevel Converter with Floating Capacitors for a small tokamak, PHiX - Masamichi Murayama (Tokyo Institute of Technology)

13:15 A novel digital magnet power supply approach - Enrico Braidotti (CAEN ELS s.r.l.)

13:15 Driving and protecting superconducting hybrid magnets - Lou van Lieshout

13:15 Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University - Chengxi Jiang (Huazhong University of Science and Technology)

13:15 Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field - Jun Zhou (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)

13:15 EMC tests at the location of the DCCT and ADC calibration laboratory at FAIR project - Cornelius Post (Lambda Engineering)

13:15 Ramping Injector Power Supply for Dipole Magnets - Dimitrios Papathanasiou (Ampulz)

13:15 Indirectly cooled superconducting power supply for the CMD-3 thin solenoid - Sergey Karpov (Budker Institute of Nuclear Physics)

13:15 Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System - Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet - Yun Xu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field - Yongheng Huang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field - Yongheng Huang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field - Zhangfei Zhao (Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)

13:15 Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet - Tonghai Ding (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Upgrade of the Grenoble High Magnetic Field Facility - Romain Barbier (LNCMI-EMFL-CNRS)
15:00 JT-60
JT-60
15:00 - 16:30
Contributions

15:00 [Invited] JT-60SA Magnet System Status - Sam Davis (Fusion for Energy)

15:30 Vacuum Pressure Impregnation for Central Solenoid of JT-60SA - Haruyuki Murakami (National Institutes for Quantum and Radiological Science and Technology)

15:45 Completion of ENEA’s procurement for 9 TF coils of JT-60SA tokamak - Gian Mario Polli (ENEA FSN)

16:00 Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility - Walid Abdel-Maksoud (CEA)

16:15 Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs). - Alexandre Louzguiti (CEA)
NMR Magnets and Novel Medical Applications
NMR Magnets and Novel Medical Applications
15:00 - 16:30
Contributions

15:00 Design and technical development of a high-resolution 1.3 GHz NMR magnet - Yoshinori Yanagisawa (RIKEN)

15:15 Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets - William Marshall (National High Magnetic Field Laboratory)

15:30 Development of liquid nitrogen cooled RE-Ba-Cu-O magnet for NMR use - Gen Nishijima (National Institute for Materials Science)

15:45 Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction - SangGap Lee (Korea Basic Science Institute)

16:00 Control design of a magnetic catheter navigation system for cardiac arrhythmias - Jianhua Liu (Intitute of Electrical Engineering, Chinese Academy of Sciences)

16:15 Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments - Kei Koyanagi (TOSHIBA Corporation)
Dipole Accelerator Magnets beyond 16 T
Dipole Accelerator Magnets beyond 16 T
15:00 - 16:30
Contributions

15:00 [Invited] High Field Twin-aperture Dipole Magnet R&D for SPPC Pre-study - Qingjin XU (IHEP)

15:30 Design of a Nb3Sn 16 T block dipole for the Future Circular Collider - Clement Lorin (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))

15:45 Magnetic and mechanical design of a 16 T common coil dipole for FCC - Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno)

16:00 Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider - Vittorio Marinozzi (University of Milan / INFN)

16:15 Development and test of REBCO canted cosθ dipole coils with CORC® wires - Xiaorong Wang (Lawrence Berkeley National Laboratory)
16:30 Break
Break
16:30 - 17:00
17:00 Nb3Sn Dipole Magnets for Accelerators
Nb3Sn Dipole Magnets for Accelerators
17:00 - 18:30
Contributions

17:00 Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN - Frederic Savary (CERN)

17:15 Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN - Gerard Willering (CERN)

17:30 Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4 - Diego Arbelaez (LBNL)

17:45 Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator - Alexander Zlobin (Fermilab)

18:00 Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models - Gueorgui Velev (FNAL)

18:15 Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC - Bernhard Auchmann (CERN)
Motors
Motors
17:00 - 18:30
Contributions

17:00 Experimental Evaluation and Numerical Simulation of a HTS Linear Synchronous Motor for High Speed Railway - Guangtong Ma (Southwest Jiaotong University)

17:30 Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion - Guangwei Liu (Shenyang University of Technology)

18:00 Design and Analysis of a Novel Large Mover Slot Opening Flux-Reversal Linear Permanent Magnet Machine with HTS Bulks - Yuting Gao (School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
Stability, Magnetisation and Field Quality
Stability, Magnetisation and Field Quality
17:00 - 18:30
Contributions

17:00 Overview of Recent Progress in No-Insulation REBCO Magnet Research - Seungyong Hahn (Seoul National University / National High Magnetic Field Lab.)

17:15 Mechanisms to enhance stability, post-quench recovery and availability in non-insulated REBCO magnets - Wan Kan Chan (North Carolina State University, Raleigh, USA)

17:30 Self-heating effect in HTS coils - Anne Bergen (University of Twente)

17:45 A portable superconducting magnet system with trapped field > 3 T - Zhou Difan (University of Cambridge)

18:00 Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs - Tommaso Bagni (University of Twente)

18:15 Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time - David K. Hilton (NHMFL-FSU)
18:30 Free evening
Free evening
18:30 - 19:00
Tuesday 29 August 2017

08:00 Registration Open from 8:00 to 18:30
Registration Open from 8:00 to 18:30
08:00 - 08:20

08:20 Exhibition Open from 9:00 to 20:15
Exhibition Open from 9:00 to 20:15
08:20 - 08:45
08:45 Wigglers, Undulators and Fast-cycling Accelerator Magnets
Wigglers, Undulators and Fast-cycling Accelerator Magnets
08:45 - 10:15
Contributions

08:45 Superconducting Undulators Toward Commercial Products - Cristian Boffo (Babcock Noell GmbH)

09:00 Magnetic field measurements of full scale conduction cooled superconducting undulator coils - Sara Casalbuoni (IBPT-KIT)

09:15 The Design of Magnetic Needles for Improving Magnetic Field Measurement System - Cheng-Ying Kuo (NSRRC)

09:30 Development of low resistance splicing between Nb3Sn and NbTi wires to make superconducting wigglers on the base of Nb3Sn superconductor - Alexey Bragin (Budker Institute of Nuclear Physics)

09:45 Status of Magnet System for CSNS RCS - Wen Kang (Institute of High Energy Physics (IHEP))

10:00 New design of a pulse magnet for the J-PARC RCS injection shift bump magnet - Tomohiro Takayanagi (JAEA/J-PARC)
Novel Applications
Novel Applications
08:45 - 10:15
Contributions

08:45 [Invited] Recent Progress of Superconducting Induction Heater with HTS magnets in Korea - Jongho Choi (Supercoil Co., Ltd.)

09:15 A new approach of tube bugling based on electromagnetic attractive force - Qi Xiong (Three Gorges University, China)

09:30 The limits of space radiation magnetic shielding - Riccardo Musenich (Universita e INFN Genova (IT))

09:45 Study on Electromagnetic Force Distribution and Material Forming Performance in Electromagnetic Tube Expansion with Concave Coils - Li Qiu (Three Gorges University, China)

10:00 Investigation of Design Considerations for an Electromagnetic Induction Coilgun System - Dinh-Vuong Le (Changwon National University)
Quench and Normal Zone Behaviour
Quench and Normal Zone Behaviour
08:45 - 10:15
Contributions

08:45 High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films - Roland Gyuráki (Karlsruhe Institute of Technology)

09:00 Quench propagation and degradation limits of pre-strained HTS tapes with a spot heater - Yujin Tong (Lanzhou University)

09:15 Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements. - Tiina Salmi (Tampere University of Technology, Finland)

09:30 Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors - Matthias Mentink (CERN)

09:45 Prediction and analysis of quench propagation test results in the ITER TF Insert Coil using the 4C code - Roberto Zanino (Politecnico di Torino)

10:00 Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils - Kabindra Bhattarai (Applied Superconductivity Center-NHMFL)
10:15 Break
Break
10:15 - 10:45
10:45 ITER Magnets
ITER Magnets
10:45 - 12:15
Contributions

10:45 Completion and test of the first ITER TF coil winding pack by Europe - Alessandro Bonito Oliva (Fusion for Energy)

11:00 Series Production of ITER TF Coil Winding Pack in Japan - Norikiyo Koizumi (National Institutes for Quantum and Radiological Science and Technology)

11:15 Test of ITER-TF joint samples with NIFS test facilities - Shinsaku Imagawa (National Institute for Fusion Science)

11:30 Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016 - Hidemasa Ozeki (National Institutes for Quantum and Radiological Science and Te)

11:45 Manufacture of the ITER Central Solenoid components - Paul Libeyre (ITER Organization)

12:00 Status of the ITER In-vessel Coils System and Progress on the Qualification of the In-Vessel Coil Conductor - Anna Encheva (ITER IO)
Coils for Power, Energy, Transport, and other Applications
Coils for Power, Energy, Transport, and other Applications
10:45 - 12:15
Contributions

10:45 [Invited] HTS field coils with robust design for a superconducting wind turbine generator - Markus Bauer (THEVA Dünnschichttechnik GmbH)

11:15 Hardware integration and performance analysis of a 10 kW HTS wind power generator - Hae-Jin Sung (Changwon National University)

11:30 In-vacuum magnet technology inspired from semiconductor equipment - Ton Peijnenburg (VDL Enabling Technologies Group)

11:45 Measurement of Magnetic Materials at Room And Cryogenic Temperature for Their Application to Superconducting Wind Generators - Yingzhen Liu (ITEP, KIT)

12:00 Design and Test of a superconducting levitation system for gravity measurement - Xinning Hu (1Institute of Electrical Engineering, Chinese Academy of Sciences)
Quench Detection and Protection Systems - I
Quench Detection and Protection Systems - I
10:45 - 12:15
Contributions

10:45 32T Protection Design and Operation - Patrick Noyes (FSU-NHMFL)

11:00 Quench detection via Rayleigh backscattering interrogated optical fibers - Federico Scurti (NCSU)

11:15 Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN - David Carrillo (CERN)

11:30 Quench (Thermal Runaway) Protection of Bi2223 (DI-BSCCO) Magnets - Eiji Shizuya (Sumitomo Electric Industries, Ltd.)

11:45 Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench - Mingzhi Guan (Institute of Modern Physics, Chinese Academy of Sciences )

12:00 Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils - Matthias Mentink (CERN)
12:15 Lunch
Lunch
12:15 - 13:15
13:15 Accelerator Magnets
Accelerator Magnets
13:15 - 15:00
Contributions

13:15 Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC - Helene Felice (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))

13:15 Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Kento Suzuki (High Energy Accelerator Research Organization)

13:15 Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade - Shun Enomoto (KEK)

13:15 Magnetic measurements of the NICA booster superconducting magnets - Vladimir Borisov (Joint Institute for Nuclear Research)

13:15 Electromagnetic analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR - Lukasz Tomkow (Wrocław University of Technology)

13:15 Preliminary design of the FAIR Super FRS superferric branched dipoles - Arnaud Madur (CEA Saclay)

13:15 Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider - Emelie Nilsson (CERN)

13:15 Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade - Michinaka Sugano (KEK)

13:15 Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector. - Jeroen Van Nugteren
Resistive Accelerator Magnets
Resistive Accelerator Magnets
13:15 - 15:00
Contributions

13:15 Design and characterisation of tunable high gradient permanent magnets quadrupoles - Fabrice Marteau (Synchrotron SOLEIL)

13:15 Injection Kicker for HESR at FAIR using Semi-Conductor Switches - olivier cosson

13:15 Simulations, measurements and sorting of THOMX ring bending magnets. - Cynthia Vallerand (Linear Accelerator Laboratory) Fabrice Marteau (Synchrotron SOLEIL)

13:15 Accurate 3D Field Mapping of an Iron Shielded Split Coil Spectrometer Magnet - Christina Wouters (ETH Zurich)

13:15 Design Study of Main Magnets for the J-PARC RCS Energy Upgrade - Norio Tani (Japan Atomic Energy Agency)

13:15 Design and measurent of a 2.4 tesla superbend magnet prototype at SSRF - Maofei Qian (Shanghai Institute of Applied Physics, CAS)

13:15 SwissFEL Beam Dump Dipole Spectrometer Simplistic Design Backed by Accurate Magnetic Field Measurements - Vjeran Vrankovic (Paul Scherrer Institute)

13:15 Fast dipole magnet development - Ivan Morozov (BINP)

13:15 FIELD QUALITY FROM TOLERANCE ANALYSES IN EIGHT-PIECE QUADRUPOLE MAGNET* - Jie Liu (Argonne National Laboratory)

13:15 Quadrupole design for the 2 GeV upgrade of the CERN PS-Booster - Jonathan David Speed (CERN)

13:15 Magnetic Septa for the SIS100 Accelerator at FAIR - Peter Rottländer (GSI Darmstadt)

13:15 Field Measurement of a Pulse Bending Magnet for a Beam-Switching System in the J-PARC - Masahiro Yoshimoto (JAEA/J-PARC)

13:15 Optimization of the Radiation Resistant Quadrupole Magnets for the SIS-100 Accelerator of the FAIR Project - Carsten Muehle (GSI Helmholtzzentrum fuer Schwerionenforschung)

13:15 Lambertson Septum Magnet Design for the LCLS-II Beam Spreader at SLAC - John Amann (SLAC National Accelerator Laboratory)

13:15 Sirius - Details of the new 3.2 T Permanent Magnet Superbend - James Citadini (Brazilian Synchrotron Light Laboratory)

13:15 Fast ramped dipole and DC quadrupoles design for the Beam Test Facility upgrade - Lucia Sabbatini (INFN-LNF)

13:15 Sector DC Dipoles Design for the Beam Test Facility Upgrade - A. Vannozzi
Fusion Magnets: Cooling, Testing and Quenching
Fusion Magnets: Cooling, Testing and Quenching
13:15 - 15:00
Contributions

13:15 Evaluation of Voltage between Conductors for Resonance Phenomenon and Transient Response in JT-60SA Central Solenoid - Sho Fujiyama (Sophia University)

13:15 Measurements of the Effective Thermal Conductivity of the ITER TF Coil Case Cooling System - Xabier Sarasola (EPFL)

13:15 Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility - François BONNE (CEA) Sylvie NICOLLET (CEA)

13:15 Quench simulation of a DEMO TF coil using a quasi-3D coupling tool - Quentin Le Coz (CEA/IRFM)

13:15 Current Center Line Measurement of ITER TF Coil - Norikiyo Koizumi (National Institutes for Quantum and Radiological Science and Technology)

13:15 Study of the Hotspot Temperature during Quench in the Non-Planar Coils of W7-X - Kamil Sedlak (Paul Scherrer Institut, Switzerland)

13:15 ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY - Daniel Ciazynski (CEA)

13:15 Superconducting Feeder System For ITER Central Solenoid Module Final Test Facility - Zbigniew Piec (General Atomics)
Superconducting, Resistive and Pulsed High Field Magnets
Superconducting, Resistive and Pulsed High Field Magnets
13:15 - 15:00
Contributions

13:15 Static and transient magnetic design of a Septum magnet for ThomX accelerator - Olivier Cosson Patrice Jehanno

13:15 Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life - Tao Peng (Wuhan National High Magnetic Field Center)

13:15 Energy and material efficient non-circular bore Bitter magnets - Andrey Gavrilin (Florida State University, Florida, USA)

13:15 A Modularon-PCB-boardhigh voltage capacitor bank charger - Houxiu Xiao (Huazhong University of Science and Technology)

13:15 Electrical and Mechanical Interactions between Component Coils of Multi-Plex Pulsed Magnet Systems - Doan Nguyen (Los Alamos National Laboratory)

13:15 Construction and test of the NHMFL 32 T superconducting magnet - H.W. Weijers (NHMFL/FSU)

13:15 A 9 T Cryocooler Cooled High current density NbTi superconducting magnet - Bai Lifeng (Northwest Institute for Nonferrous Metal Research)

13:15 A novel clamping method for resistive magnets - Frans Wijnen (Radboud University Nijmegen)

13:15 Fast cooling high field pulsed magnet with distributed mini cooling gaps - Yiliang Lv (Huazhong University of Science and Technology)
NMR Magnets
NMR Magnets
13:15 - 15:00
Contributions

13:15 A long solenoid HTS magnet with the Joint-less winding technique - Seyeon Lee (Korea polytechnic university)

13:15 The Scanning Magnets for Proton Therapy Designed by SINAP - Bolei Jia (Shanghai Institute of Applied Physics)

13:15 Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet - Min Cheol Ahn (Kunsan National University)

13:15 Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet. - Junseong Kim (Electrical and Electronic Engineering, Yonsei University)

13:15 Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications - Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:15 Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet - Dongkeun Park (Massachusetts Institute of Technology, Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center)

13:15 Development of HTS bulk NMR relaxometry with ring-shaped iron rings - SeokBeom Kim (Okayama University)

13:15 HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype - Dongkeun Park (Massachusetts Institute of Technology, Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center)

13:15 Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet - Takeshi Ueno (Sophia University)
Motors - II
Motors - II
13:15 - 15:00
Contributions

13:15 A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization - Jin-Seok Kim (SUNGKYUNKWAN UNIVERSITY)

13:15 Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor - Myung-Ki Seo (Sungkyunkwan University)

13:15 Improved Inner Stator-Magnet Moving-Iron Transversal-Flux Linear Oscillatory Machine with Magnets in Inner Stator Yoke - Wei Xu (School of Electrical and Electronics Engineering, Huazhong University of Science and Technology)

13:15 A New Partitioned Stator Hybrid Excitation Flux Switching Motor with Ferrite Permanent Magnet - Yi Du (Jiangsu University)

13:15 FLUX-REGULATION PERFORMANCE FOR RADIAL SUSPENSION FORECES OF BEARINGLESS FLUX-SWITCHING MOTOR - Chenyin Zhao

13:15 3D Electromagnetic Analysis of Tubular Permanent Magnet Linear Launcher - Hao Chen (China University of Mining & Technology)

13:15 Novel Heteropolar Hybrid Radial Magnetic Bearing with Double-Layer Stator for Flywheel Energy Storage System - Wei Xu (Huazhong University of Science and Technology)

13:15 Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor - Tomoharu Karashima (Kyoto University)

13:15 A Novel Five-phase Double-Stator Tubular Fault-tolerant Flux-Modulation Permanent Magnet Motor - Huawei Zhou (Jiangsu University)

13:15 Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine With Amorphous Stator Core - yong kong (School of Electrical Engineering, Southeast University)

13:15 Research on control system of a novel coil assisted reluctance motor - Aimin Liu (Shenyang University of Technology)

13:15 Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions - Hailin Huang (Huazhong University of Science and Technology)

13:15 AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor - Kenichi Ikeda (Kyoto University)

13:15 Design of a Novel Double-Stator Flux Reversal Machine with Hybrid HTS and PM Excitations - Dawei Li (Huazhong University of Science and Technology)

13:15 Optimization Design of Bearingless Synchronous Reluctance Motor - Ding Haifei (Jiangsu University)

13:15 Vibration Comparison of Two Fault-Tolerant Flux-Switching Permanent-Magnet Machines - Guohai Liu (School of Electrical and Information Engineering, Jiangsu University)

13:15 Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region - Myung-Ki Seo (Sungkyunkwan University)

13:15 A New Magnetic Field Modulation Type of Brushless Double-Fed Machine - Xinbo Liu (Jiangsu University)

13:15 A Study on the Selection of the Optimal Number of Poles for Maximizing the Magnetic Flux of Spoke type Permanent Magnet Motor - SUNG GU LEE (Busan University of Foreign Studies) Won-Ho Kim (Gachon University)

13:15 Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor - Siyu Guo (Kyoto University)

13:15 Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method - Jin-Seok Kim (SUNGKYUNKWAN UNIVERSITY)

13:15 Core Loss Calculation of Permanent Magnet Machines Using Analytical Method - Kyung-Hun Shin (Chungnam National University)

13:15 Torque Ripple Minimization in a PM-assisted Synchronous Reluctance Motor with Different Flux Barrier Rotor - Aamir Nazir (Jiangsu University)

13:15 Minimization design of torque ripple for bearingless synchronous reluctance motor - Xiaoyan Diao (Jiangsu University)

13:15 Performance Evaluation of a Novel Axial Flux Claw Pole Machine with Soft Magnetic Composite Cores - chengcheng liu (Hebei university of technology)

13:15 Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine - Kyung-Hun Shin (Chungnam National University)

13:15 Novel 4/4 Stator/Rotor Single-Phase Asymmetric Stator-Pole Doubly Salient Machine with Permanent Magnets on Stator Teeth - Wei Xu (Huazhong University of Science and Technology)
Fault Current Limiters
Fault Current Limiters
13:15 - 15:00
Contributions

13:15 Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings - Shin-Won Lee (Jungwon University)

13:15 Performance simulation of a bias-flux superconducting fault current limiter (SFCL) based on MATLAB/SIMULINK - Jiang Shengqian

13:15 Winding Technology And Experimental Study On Superconductive Fault Current Limiter - chen liang

13:15 Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding - Tae-Hee Han (Jungwon University)

13:15 Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL - Sinian Yan (Huazhong University of Science and Technology, China)

13:15 Design and fabrication of HTS DC bias coil for 500kV saturated iron core fault current limiter - Tao Ma (Beijing Jiaotong University)

13:15 Design and Test of 10 kV/400 A Flux-coupling Type Superconducting Fault Current Limiting Module - Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Science)

13:15 Design and verification test of a flux-coupling type superconducting fault current limiter - Li Ren (Huazhong University of Science and Technology)

13:15 Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil - Derong Qiu (Shanghai Jiao Tong University)

13:15 Current Limiting and Recovery Characteristics of A Trigger Type SFCL using Double Quench - Sung-Hun Lim (Soongsil University)

13:15 Effectiveness of Superconducting Fault Current Limiting Transformers in Power Systems - Mariam Elshiekh (University of Bath, UK)

13:15 Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter - Seonho Hwang (Chosun university)

13:15 Development of round flexible HTS CORC® wires for fault current limiting applications - Jeremy Weiss (Advanced Conductor Technologies)

13:15 Basic study of superconducting coils in rectifier transformers for railway electrification system - Yusuke Fukumoto (Railway Technical Research Institute)

13:15 Experimental tests on a superconducting hybrid DC circuit breaker - Xiaoze Pei (University of Bath)

13:15 Magnetic field and characteristic analysis of the superconducting fault current limiter for DC applications - dong xia (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:15 Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system - HyeWon CHOI (CHOSUN University)

13:15 Characteristic analysis of SFCL DC interrupting system in Windfarm - Jun Beom Kim (Chosun University)

13:15 Conceptual Design and Performance Evaluation of a 35 kV / 500 A Flux-Coupling-Type SFCL for Protection of a DFIG-Based Wind Farm - Lei Chen (Wuhan University) Ying Xu (Huazhong University of Science and Technology)
ReBCO Cables and Nb3Sn CICC
ReBCO Cables and Nb3Sn CICC
13:15 - 15:00
Contributions

13:15 Evaluation of Electrical Characteristics for a Twisted Soldered-Stacked-Square (3S) HTS Wire with 1 mm Width - Zhuyong Li

13:15 Experimental study on the effect of twisting on critical currents of Nb3Sn cable-in-conduit conductors - Shinsaku Imagawa (National Institute for Fusion Science)

13:15 Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors - Simonetta Turtu' (ENEA)

13:15 Stacked tape HTS conductors for Fusion Magnets - Davide Uglietti

13:15 Development of small diameter HTS Cross Conductors for Fusion Magnet Application - Walter H. Fietz (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)

13:15 Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament - Kohei Higashikawa (Kyushu University)

13:15 Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications - Federica Pierro (Tufts University)

13:15 An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T - Chris Kovacs (The Ohio State University)

13:15 Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor - TSUYOSHI YAGAI (Sophia University)

13:15 Experimental Study on AC Loss of a Quasi-isotropic Strand Fabricated by 2G HTS CCs in AC Magnetic Fields - Yan Li

13:15 Numerical Study on Electro-thermal Characteristics of Core Cable Consisted Of YBCO Coated Conductor - shanshan fu (China electric power research institute)

13:15 Current sharing properties of REBCO superconducting parallel conductors wound into a coil - Shintaro Sagawa (Kyushu University)

13:15 Recent progress in development of high performance CICCs for CFETR magnet - Jinggang Qin
Mechanical Behaviour
Mechanical Behaviour
13:15 - 15:00
Contributions

13:15 Study of bending behavior in Nb3Sn strands - Tsutomu Hemmi (National Institutes for Quantum and Radiological Science and Technology)

13:15 High definition 3D finite element analysis of low temperature Rutherford cable - François Nunio (CEA-IRFU)

13:15 Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade - Giorgio Vallone (CERN)

13:15 Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization - Hiroyuki Fujishiro (Iwate University)

13:15 Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements - Qiang Hu (Key Laboratory of Mechanics on Western Disaster and Environment, Ministry of Education, College of Civil Engineering and Mechanic, Lanzhou University; Institute of Modern Physics of Chinese Academy of Science)

13:15 Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression - Felix Josef Wolf (TU Bergakademie Freiberg (DE))

13:15 Experimental Study on the Mechanical Stress Effect on the Degradation of High Temperature Superconducting Coils - Toru Ueki (Meiji University)

13:15 Simulation of the ITER Toroidal Field Coil Case welding distortion using Finite Element Method - Marc Jimenez (Fusion For Energy)

13:15 Mechanical properties of bulk MgB2 superconductors processed by spark plasma sintering at various temperatures - Akira Murakami (Ichinoseki College)

13:15 Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion - Seunghak Han (Electrical and Electronic Engineering, Yonsei University)

13:15 Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions - Hyung-Seop Shin (Andong National University)

13:15 Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires - Jung-Bin Song (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization - Keita Takahashi (Iwate University)

13:15 Tail Component Qualification for the EU ITER PF Coils - Mikel Bilbao Gutierrez (Fusion for Energy)

13:15 Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding - Masahiro Kato (Tohoku University)
Multiphysics Design and Analysis
Multiphysics Design and Analysis
13:15 - 15:00
Contributions

13:15 Improved Modeling of Canted-Cosine-Theta Magnets - Lucas Brouwer (Lawrence Berkeley National Laboratory)

13:15 Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS - Jang Jae Young (Korea Basic Science Institute)

13:15 Research on Temperature Rise and Temperature Control for Giant Magnetostrictive Transducer - Wenmei Huang (Key Laboratory of Electro-Magnetic Field and Electrical Apparatus Reliability of Hebei Province)

13:15 Comparative study between in-situ measurements and a 3D efficient model for the computation of magnetic fields in High Field Polyhelix magnets - Christophe Trophime (LNCMI - CNRS)

13:15 Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors - Naoki Tominaga (Kyoto University)

13:15 Towards real time computation of 3D magnetic field in parametrized Polyhelix magnets using a reduced basis Biot-Savart model - Romain Hild (IRMA Strasbourg)

13:15 Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields - Guangwei Liu (Shenyang University of Technology)

13:15 Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids - Heng Pan (LBNL)

13:15 Refinement and application of a generic CFD toolkit covering the heat flows in combined solid–liquid systems to investigate thermal quench limits of superconducting magnets - Fouad Aabid (CERN)

13:15 Shielding Current Analysis in High-Temperature Superconducting Film and Its Application - Teruou Takayama (Yamagata University)

13:15 STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits - Lorenzo Bortot (CERN)
Flux Pumps and Switches
Flux Pumps and Switches
13:15 - 15:00
Contributions

13:15 CHARGING 2G HTS DOUBLE PANCAKE COILS WITH THE HTS FLUX PUMP METHOD - Wei Wang (Sichuan University)

13:15 Thermal and electric analysis of the flux pump to apply conduction cooled superconducting magnet - Woo Seung Lee (JH Engineering Corp.)

13:15 Frequency ramping effects on a dynamo-type HTS flux pump - Andres Pantoja (Victoria University of Wellington)

13:15 Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads - Jeyull Lee (Yonsei University)

13:15 Impact of stator ring width on output of a dynamo-type HTS flux pump - Andres Pantoja (Victoria University of Wellington)

13:15 Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor. - Haeryong Jeon (Yonsei University)

13:15 Optimising rotor speed and design for an externally-mounted HTS dynamo - Andres Pantoja (Victoria University of Wellington)

13:15 Design Considerations and Characteristics of Antenna Arrays for Wireless Power Charging System in Superconducting MAGLEV - Yoon Do Chung (Suwon Science College)

13:15 Ultra-high field HTS flux-pumped magnets - Tim Coombs (University of Cambridge)
Circuitry and Control of Magnet Systems
Circuitry and Control of Magnet Systems
13:15 - 15:00
Contributions

13:15 Determination of Threshold Electric Field for PPLP Specimen in Liquid Nitrogen Based on the Measurement of Electrical Conductivity - Ik-Soo Kwon (Department of Electronic System Engineering)

13:15 Injection control by neural network approach for Pulse-magnet of Taiwan Light Source - Cheng-Ying Kuo (NSRRC)

13:15 Simulation and Experiment of HTS Coils with a New Structure as Inductors in STRETCH Meat Grinder Circuit - Zuoshuai Wang (Huazhong University of Science and Technology)

13:15 Operating Characteristics of Underwater Wireless Power Transfer for Maritime Applications Using Strong Copper Resonance Coupling Coils - Yoon Do Chung (suwon Science College)

13:15 Measurement and Analysis of Amplitude Magnetic Permeability and Magnetic Losses of Silicon Steel Sheet - Rongge Yan (Hebei University of Technology)

13:15 Induced Voltage Characteristics by Back-Iron Effect for Electromagnetic Energy Harvester Using Magnetic Fluid - Kang Won Lee (Joongbu University)

13:15 Operating characteristics of Arc-induction type DC circuit breaker - PARK SANGYONG (KOREA)

13:15 Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure - Young Jin Hwang (Korea Basic Science Institute)
15:00 Nb-Ti Accelerator Magnets
Nb-Ti Accelerator Magnets
15:00 - 16:30
Contributions

15:00 Recommissioning and upgrades to the FNAL muon g-2 magnets - Karie Badgley (Fermilab)

15:15 Coil Dominated Superconducting Multiplets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) geometry - Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)

15:30 Superconducting Magnets for High Performance ECR Ion Sources - Liangting Sun (Institute of Modern Physics, CAS)

15:45 Development of SECRAL II superconducting magnet - Tongjun Yang (Institute of Modern Physics, Chinese Academy of Sciences) Wei Wu (Institute of Modern Physics, Chinese Academy of Sciences)

16:00 Status of manufacturing and testing of superconducting magnets for NICA and FAIR projects - Hamlet Khodzhibagiyan (Joint Institute for Nuclear Research)

16:15 A 8T Focusing Superconducting Solenoid for FRIB - Chao Li (Northwestern Polytechnical University )
ReBCO Conductor Properties & Characterisation
ReBCO Conductor Properties & Characterisation
15:00 - 16:30
Contributions

15:00 Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires - Tim Mulder (University of Twente (NL))

15:15 In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor - Takanobu Kiss (Kyushu University)

15:45 Superconducting properties of 2G HTS wires with artificial pinning centres fabricated using production scale PLD equipment - Pavel Degtyarenko (Joint Institute for High Temperatures, Russian Academy of Science)

16:00 High performance coated conductors wire for magnet applications - Markus Bauer (THEVA Dünnschichttechnik GmbH)

16:15 Defect formation and improved critical current density in YBCO superconducting films by electron beam irradiation - Byung-Hyuk Jun (Korea Atomic Energy Research Institute)
AC Loss in Cables and Coils
AC Loss in Cables and Coils
15:00 - 16:30
Contributions

15:00 Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields - Mike Sumption (The Ohio State University)

15:15 AC Loss and inter-tape resistance in various HTS cable configurations - Konstantin Yagotintsev (University of Twente)

15:30 Effect of striating coated conductors on reducing shielding-current-induced fields in pancake coils exposed to normal magnetic fields - Naoyuki Amemiya (Kyoto University)

16:00 AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration - Sadanori Iwai (Toshiba Corporation)

16:15 Role of electrostatic charges in the calculation and measurement of AC losses in superconducting coils. - Fedor Gömöry (Slovak Academy of Sciences)
16:30 Break
Break
16:30 - 17:00
17:00 Quest and Development of Superconductors for Future Magnets
Quest and Development of Superconductors for Future Magnets
17:00 - 18:45
Contributions

17:00 Development of superconductors for future large scale applications - Amalia Ballarino (CERN)

17:25 Advanced superconductors developed at WST - Jianwei Liu (WST, Western Superconducting Technologies Co.,Ltd)

17:50 Development of Superconductors at Furukawa Electric Group - Hisaki Sakamoto (Furukawa Electric Co., Ltd.)

18:15 Meeting Divergent Expectations: Superconductors between Industrial Applications & Cutting-Edge Science - Burkhard Prause (President & CEO Bruker EST, Inc.)
18:45 Exhibitors Reception (1h30)
Exhibitors Reception (1h30)
18:45 - 20:15
Wednesday 30 August 2017

08:00 Registration Desk Open from 8:00 to 18:30
Registration Desk Open from 8:00 to 18:30
08:00 - 08:20

08:20 Exhibition Open from 9:00 to 18:30
Exhibition Open from 9:00 to 18:30
08:20 - 08:45
08:45 Carbon-Ion Radio Therapy
Carbon-Ion Radio Therapy
08:45 - 09:15
Contributions

08:45 Development of Carbon-Ion Radiotherapy Facilities at NIRS - Iwata Yoshiyuki (National Institute of Radiological Sciences (NIRS))
09:15 High Field Facilities
High Field Facilities
09:15 - 09:45
Contributions

09:15 High Magnetic Field Science and Technology - Greg Boebinger (National High Magnetic Field Laboratory / Florida State University)
09:45 Six Young Scientists Pitching Their Research
Six Young Scientists Pitching Their Research
09:45 - 10:15
Contributions

09:45 High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films - Roland Gyuráki (Karlsruhe Institute of Technology)

09:50 A persistent current 1.3 GHz (30.5 T) NMR - Yoshinori Yanagisawa (RIKEN)

09:55 HTS high current cable for fusion application - Nikolay Bykovsky (EPFL - SPC)

10:00 Two-layer, Cosθ Dipole for the FCC - Eddie Frank Holik

10:05 A new understanding of the heat treatment of Nb3Sn superconducting wires - Charlie Sanabria (NHMFL)

10:10 Into the future with high temperature superconductors - Jeroen Van Nugteren
10:15 Break
Break
10:15 - 10:45
10:45 Resistive Accelerator Magnets
Resistive Accelerator Magnets
10:45 - 12:15
Contributions

10:45 Twin aperture bending magnets and quadrupoles for FCC-ee - Attilio Milanese (CERN)

11:00 Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings - Fernando Toral (Centro de Investigaciones Energéti cas Medioambientales y Tecno) Manuel Angel Dominguez Martinez (Ciemat)

11:15 Status and realization of an high efficiency transport beamline for laser-driven ion beams - Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)

11:30 Development of prototype high gradient small aperture quadrupole magnets for HEPS-TF - Yingshun Zhu (Institute of High Energy Physics,Chinese Academy of Sciences)

11:45 Permanent Magnet Dipoles For the ESRF Upgrade - Joel Chavanne (European Synchrotron Radiation Facility)

12:00 Tuneable permanent magnets: Power saving solutions for the next generation of high energy accelerators. - Alexander Bainbridge (STFC)
Magnets for MRI
Magnets for MRI
10:45 - 12:30
Contributions

10:45 In Memory of David Hawksworth - Graham Gilgrass

11:00 Conductor for MRI magnets beyond NbTi - Michael Parizh (GE Global Research)

11:15 Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System - Lionel Quettier (CEA Saclay)

11:30 Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm - Sadanori Iwai (Toshiba Corporation)

11:45 Development of 3 T high-temperature superconducting magnet for MRI - Masayoshi Oya (Mitsubishi Electric Corporation)

12:00 Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications - Mike Sumption (The Ohio State University)

12:15 MRI scanner development in Russia - Timophey Demikhov (Lebedev Physics Institute)
ReBCO Cables for Different Applications and Advanced Nb3Sn CICC
ReBCO Cables for Different Applications and Advanced Nb3Sn CICC
10:45 - 12:15
Contributions

10:45 Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet. - Anna Kario (KIT)

11:00 High-temperature superconducting CORC® magnet cable and wire development and their application - Danko van der Laan (Advanced Conductor Technologies)

11:15 Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications - Mike Sumption (The Ohio State University)

11:30 Bending of CORC cables, Experiments and Modeling - Anvar Valiyaparambil Abdulsalam (University Of Twente)

11:45 Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets - Tim Mulder (University of Twente (NL))

12:00 Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles - Konstantin Yagotintsev (University of Twente)
12:15 Lunch
Lunch
12:15 - 13:15
13:15 FCC and other Future Accelerator Magnets
FCC and other Future Accelerator Magnets
13:15 - 15:00
Contributions

13:15 FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator - Charilaos Kokkinos (FEAC Engineering P.C.)

13:15 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM - Etienne Rochepault (CERN)

13:15 A novel method for greatly reduced edge effects design in CCT magnets - m Koratzinos (Universite de Geneve (CH))

13:15 Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC - Dariusz Pulikowski (CERN)

13:15 Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider - Clement Lorin (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))

13:15 Design Studies of High-Field Nb3Sn Dipoles for a post-LHC pp Collider - Alexander Zlobin (Fermilab)

13:15 Assembly of the Nb3Sn dipole magnet FRESCA2 - Nicolas Bourcey (CERN)

13:15 Development of the Mineral Insulated High Temperature Superconducting Magnet for Future High Intensity Muon Beamline - Ye Yang (Kyushu University)

13:15 High Gradient Nb3Sn Quadrupole Demonstrator MKQXF Engineering Design - Charilaos Kokkinos (FEAC Engineering P.C.)

13:15 Parametric Study of Block-coil Dipoles Using Graded Conductors - Etienne Rochepault (CERN)

13:15 3D mechanical design and analysis of 20-T twin-aperture common-coil accelerator dipole magnet - Zhang Kai (IHEP)

13:15 Stealth superconducting magnet technology for collider IR and injector requirements - Peter McIntyre (Texas A&M University)
Fusion Magnets: Manufacture and Joints
Fusion Magnets: Manufacture and Joints
13:15 - 15:00
Contributions

13:15 Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil - Tsutomu Hemmi (National Institutes for Quantum and Radiological Science and Technology)

13:15 Winding R&D for CFETR Central Solenoid Model Coil - Houxiang HAN

13:15 Optimization of the ITER Pre-Compression Ring Test Rig Flange - Luigi Reccia (Fusion for Energy)

13:15 Basic Design and Progress of Central Solenoid Model Coil for CFETR - Yu WU (ASIPP)

13:15 The PF1 coil electrical joint test results - Egor Marushin

13:15 New inspection method of joint resistance at room temperature for ITER TF Coil - Hideki Kajitani (National Institutes for Quantum and Radiological Science and Technology)

13:15 Progress of ITER TF Coil Case fabrication in Japan - Masahide Iguchi (QST)

13:15 Inter-layer Joint for the TF Coils of DEMO - Design and R&D - Boris Stepanov (EPFL-SPC)

13:15 Completion of the French JT-60SA Toroïdal Field Magnet Contribution - Patrick Decool (CEA)

13:15 MIFI (Magnet Infrastructure Facilities for Iter) : activities overview - Bertrand PELUSO (CEA)
HTS Inserts and Model Magnets
HTS Inserts and Model Magnets
13:15 - 15:00
Contributions

13:15 Conceptual Design of a Superconducting Magnet Stacked by REBCO Annulus Plates - Xi Yuan

13:15 Tests in Standalone Mode of the EuCARD 5.4-T REBCO Dipole Magnet. - Maria Durante

13:15 A Compact Test Bed for Critical Current Evaluation on High Temperature Superconducting Tape Samples - Yinming Dai (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:15 Stability simulation of a new ring-shaped YBCO coated conductor sheets magnet - Ying Min Cui (North China Electric Power University)

13:15 Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet - Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:15 Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors - Sadanori Iwai (Toshiba Corporation)

13:15 A Study on Temporal Stabilization of Magnetic Flux Focused by a Superconducting Magnetic Lens - Akihisa Miyazoe (Hitachi Ltd.)

13:15 Characteristics of an HTS dipole magnet - Kento Suzuki (High Energy Accelerator Research Organization)
Hadron Therapy Magnets and Novel Medical and Biological Applications
Hadron Therapy Magnets and Novel Medical and Biological Applications
13:15 - 15:00
Contributions

13:15 Modified Halbach Magnets in Medical Science Applications - Nicholaos Tsoupas (Brookhaven National Laboratory)

13:15 Design Study on High Frequency Magnets for Magnetic Hyperthermia Applications - Shinichi Nomura (Meiji University)

13:15 Design considerations of gantry beamline with fast energy modulation for HUST Proton Therapy Facility - Bin Qin (Huazhong University of Science and Technology)

13:15 Design of prototype magnets for HUST Proton Therapy beamline - Wei Chen (HUST)

13:15 Superconducting Coil system R&D for a 230 MeV Superconducting Cyclotron - Chuan Wang (China Institute of Atomic Energy)

13:15 Cryostat Design of 230 MeV Superconducting Isochronous Cyclotron for Proton Therapy - Jun Yoshida (Sumitomo Heavy Industries, Ltd.)

13:15 Cold Tests and Magnetic Characterization of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production - Javier Munilla (CIEMAT)

13:15 Simulation of an Octupole Scanning Magnet for Spot Scanning in Proton Therapy - BoLei Jia (Shanghai Institute of Applied Physics, Chinese Academy of Scie)

13:15 Analysis of losses in superconducting magnets based on the Nb3Sn Rutherford cable configuration for future gantries - Marco Breschi (University of Bologna, Italy)

13:15 Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair - Xiao Fang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:15 Design and construction of the main magnet for a 230 MeV Superconducting Cyclotron - Tianjue Zhang (China Institute of Atomic Energy)

13:15 Development of highly saturated dipole magnets for the SAPT booster - Miao Zhang (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)
Motors - III
Motors - III
13:15 - 15:00
Contributions

13:15 Design and analysis of a less-rare-earth PM-assisted synchronous reluctance machine considering tradeoffs of PM flux linkage and magnetic saliency - Wenye Wu (Jiangsu University)

13:15 A Superconducting Vernier Motor for Electric Ship Propulsion - T.W. Ching (University of Macau)

13:15 Novel U-shaped Structure Switched Reluctance Machine With a Module Outer Rotor - Hao Chen (China University of Mining & Technology)

13:15 DESIGN CRITERIA FOR HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MOTORS CONSIDERING ROTOR MAGNET AND SLEEVE MATERIAL - Chang-Woo Kim (Chungnam National University)

13:15 Flux Characteristics Analysis of Single-phase Tubular Permanent Magnet Linear Motor - Hao Chen (China University of Mining & Technology)

13:15 Double-Stator Permanent-Magnet Vernier Linear Machine With PMs Surface-Mounted on the Mover - Xuhui Zhu (School of Electrical and Information Engineering)

13:15 Integrated Motor Propulsor Magnet Design with Hybrid Halbach Array for Torque Ripple Reduction - Chang-Woo Kim (Chungnam National University)

13:15 Electromagnetic Performance Analysis of Less-rare-earth Stator-partitioned Multi-excitation Flux-switching Machine Considering Multi-operation Conditions - Yunyun Chen

13:15 Torque Ripple Improvement for Ferrite-Assisted Synchronous Reluctance Motors by Using Asymmetric Flux-barrier Arrangement - Meimei Xu (Jiangsu University)

13:15 Numerical Analysis of Variable Flux Memory Motor Considering Characteristics of Permanent Magent Load-Line - Wonseok Han (Sungkyunkwan University)

13:15 Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines - Kyung-Hun Shin (Chungnam National University)

13:15 Design and analysis of an interior permanent magnet synchronous machine with multi flux barriers based on electromagnetic-mechanical coupling method - Wenye Wu (Jiangsu University)
Generators
Generators
13:15 - 15:00
Contributions

13:15 Study on fault-tolerant control of open-winding brushless doubly-fed wind power generator - Guangwei Liu (Shenyang University of Technology)

13:15 Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator - Sung-Won Seo (Chungnam National University)

13:15 Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor - Guangwei Liu (Shenyang University of Technology)

13:15 Research on MgB2 armature windings in fully superconducting AC machine - Feng Lin (School of electrical and Electronic Engineering Huazhong University of Science and Technology)

13:15 AC loss analysis of the armature windings of a fully HTS rotating machine with dual field windings - Sang Ho Park (Korea polytechnic university)

13:15 Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array - Sung-Won Seo (Chungnam National University)

13:15 Moduling Axial-flux Compensated Pulsed Alternator - Xin Liang (Huazhong University of Science and Technology)

13:15 Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole - Kyung-Hun Shin (Chungnam National University)

13:15 A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator - Byeong-Soo Go (Changwon National University)

13:15 Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine - Guangwei Liu (Shenyang University of Technology)
Levitation, Bearing and Separation
Levitation, Bearing and Separation
13:15 - 15:00
Contributions

13:15 Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation - Dorus Dijkstra (University of Twente)

13:15 Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field - Zhen WANG

13:15 The Number of Magnet Poles Decision Method of Magnetic Gear for Torque Ripple Reduction - Eui-Jong Park (Chosun University)

13:15 Design of hybrid thrust magnetic bearing for heavy rotating shaft considering self-weight compensation according to axial load - Chang-Woo Kim (Chungnam National University)

13:15 Air-gap Control for Superconducting-Hybrid Magnetic Levitation Systems via Linear Matrix Inequality Optimization - Kyoung-Jin Joo

13:15 Levitation separation of precious metals utilizing magneto-Archimedes effect in high gradient magnetic fields - Osuke Miura (Tokyo Met. University)

13:15 Quality and Stability Improvement of DC Power Systems in All Electric Ship Using SMES/Battery - Hamoud Alafnan (University of Bath)

13:15 A Design of Outer Yoke and Enclosure Considering Magnet Eddy Current Loss of Magnetic Gear - Eui-Jong Park (Chosun Universtiy)

13:15 Direct simulation of interactive motion of magnetic particles in an oscillating magnetic field - Quanliang Cao

13:15 A Superconducting Magnetic Density Separation Laboratory Demonstrator - Jaap Kosse (University of Twente)
Novel Applications
Novel Applications
13:15 - 15:00
Contributions

13:15 Design and structural analysis of induction type coilgun system - Byeong-Soo Go (Changwon National University)

13:15 Analysis and Optimization of Adjustable Magnetic Fluid Damper in DC Magnetic Field - Xiaorui Yang (Hebei University of Technology)

13:15 Flow Analysis of Magnetic Fluid around a Permanent Magnet in Magnetic Fluid Damper - Xiaorui Yang (Hebei University of Technology)

13:15 Embedded flexible Fe-Si-Al powder composite-film inductor for a Low Power DC-DC Converters - Jae-Woo Lim (Dept. of Electronic Systems Engineering, Hanyang Univ)

13:15 Simulation of Thomson Parabola spectrometer for charged particle diagnostics in the PETAL+ project - Chhon PES (Irfu, CEA Saclay, Gif-sur-Yvette, France)

13:15 Development of Conduction-cooled Superconducting Split Coil for Metal Melting by DC Induction Heating - Tomonori Watanabe (Chubu Electric Power Co., Inc. )

13:15 Vibration of Magnetically Controlled Saturated Reactor under AC and DC excitation - Yan Rongge Yan Rongge (Hebei University of Technology )

13:15 Measurement and Torque Calculation of Magnetic Spur Gear Based on Quasi 3-D Analytical Method - Tae-Kyoung Bang (Republic of Korea /Chungnam National University)

13:15 Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM. - Gang-Hyeon Jang (Chungnam National University, Korea)

13:15 Analysis of Torque Characteristics according to Gear ratio of Coaxial Magnetic Gear - Jeong-In Lee (CHUNGNAM NATIONAL UNIVERSITY)

13:15 A Study on the Power Converter Performance Comparison & Optimal design induction heating coil for IH jar - Sang-Taek Lee (Korea Electronics Technology Institute)

13:15 Study on Electromagnetic Force Distribution and Copper Fatigue Performance in Electromagnetic Strengthening with Axial Compression - Li Qiu

13:15 Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key - Raphael Pasquet (Sigmaphi)

13:15 Design, fabrication, and test of a dual-coil system for electromagnetic sheet forming - Quanliang Cao

13:15 A Wide Aperture Superconducting Vector Magnet for photon beamlines: WAVE Photons - Arnaud Madur (CEA Saclay)
BSCCO, MgB2 and New HTS Wires and Cables
BSCCO, MgB2 and New HTS Wires and Cables
13:15 - 15:00
Contributions

13:15 AC loss distribution in two-layer HTS twisted cable - Jun Ogawa (Niigata University)

13:15 Progresses in Mg11B2 intermediate superconductors initiatives in India - Subrata Pradhan (Institute for Plasma Research)

13:15 Strong flux pinning caused by phase distribution characteristics in (Ba, K)Fe2As2 films - Younjung Jo (Kyungpook National University)

13:15 Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire - Chao Dai (Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP))

13:15 Heat treatment of MgB2 superconductors with different metal sheaths - ILDAR ABDYUKHANOV (VNIINM (Bochvar Institute))

13:15 Measurement campaign on critical current for MgB2 wires and tapes under a magnetic field up to 8T - Julien Avronsart (CEA)

13:15 A method of critical current measurement for HTS tape using pulsed current - A-Rong Kim (Research Institue of industrial Science & Technology (RIST))

13:15 Fabrication of grain aligned Bi2223 thick films with high critical current properties - Yasuaki Takeda (The University of Tokyo)

13:15 Hysteresis modeling of MgB2 using simplified Jiles-Atheron model - Kun dong (the Ohio state university)

13:15 Strong, round and rectangular HTS wires based on the Bi2212 superconductor - Alexander Otto (Solid Material Solutions, LLC)
Structural Materials, Electrical Insulation and other Magnet Components
Structural Materials, Electrical Insulation and other Magnet Components
13:15 - 15:00
Contributions

13:15 Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors - Giordano Tomassetti (ENEA)

13:15 Mechanical properties of aged 316LN butt-welding joint at cryogenic temperature for CFETR CS model coil - Huan Jin

13:15 Size effect on the strength of Cu-Ag microcomposites by accumulative drawing and bundling process - Ming Liang (Northwest Insititute for Non-ferrous Metal Research)

13:15 Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets - Thomas Gradt (Federal Laboratory for Materials Research (BAM))

13:15 Upper critical and irreversibility magnetic fields and transport properties of bulk K-, Ni-, and Co-doped BaFe2As2 pnictides for different granularities and their prospects in magnet design - Martin Nikolo (Saint Louis University)

13:15 Superconducting properties of YBaCuO bulk ceramics using melt process - Sang Heon Lee (Department of Electronic Engineering, Sunmoon University)

13:15 A Study on the V-t Characteristics of PPLP according to Electric Field Uniformity for a Superconducting Transformer - Hongseok Lee (Korea National University of Transportation)

13:15 Zylon aging and light resistance - Rongmei niu (National High Magnetic Field Lab.)

13:15 Investigation of Materials and Welds for the Precompression Structure of the ITER Central Solenoid - Stefano Sgobba (CERN)

13:15 Creepage Discharge Characteristics of a Solid Insulation Material for Superconducting Applications - Onyou Lee (Electrical Engineering, Korea National University of Transportation)

13:15 Particle Reinforced Cu Matrix Conductors for High Field Pulsed Magnets - Ke Han (Nationa High Magnetic Field Laboratory)

13:15 Assessment of electrical insulation of a superconducting magnet winding pack under severe loading conditions - Selanna Roccella (ENEA FSN)

13:15 Mechanical properties of ITER CICC jacket in China - Jinggang Qin

13:15 Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment - Christian Scheuerlein (CERN)

13:15 Progress of ITER Feeder System Electrical Insulation Qualification - Xiongyi Huang

13:15 Critical Current Properties of Precisely Cation Composition Controlled RE123 Melt-Solidified Bulks - Jun-ichi Shimoyama (Aoyama Gakuin University)

13:15 Cryogenic Hybrid Magnet with Praseodymium Permanent Magnet - Yasuhiro Fuwa (Kyoto University)
Stability
Stability
13:15 - 15:00
Contributions

13:15 Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models - Tommaso Bagni (University of Twente)

13:15 Robust REBCO coated conductor with meatal stitching stabilizer - Rock Kil Ko (Korea Electrotechnology Research Institute)

13:15 Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program - Ciro Calzolaio (Paul Scherrer Institut)

13:15 Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model - Ryosuke Miyao (Hokkaido University)

13:15 Measurement of overall thermal resistance and contact thermal resistance in conduction cooled HTS magnets - Jihoon Seok (Changwon National University)

13:15 A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil - Jimin Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire - Hyung-Wook Kim (Korea Electrotechnology Research Institute)

13:15 Influence of high thermal conduction plastic having negative thermal expansion property on cooling performance in conduction cooled HTS coils - Tomoaki Takao (Sophia University )

13:15 A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers - Hyun Hee Son (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:15 Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario - Tommaso Bagni (University of Twente)

13:15 Characteristics of current bypassing and transient stability in partial insulation HTS coils - SeokBeom Kim (Okayama University)

13:15 YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T - Milan Majoros (The Ohio State University)

13:15 Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials - Chang Ju Hyeon (Jeju National University)

13:15 Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling - Milan Majoros (The Ohio State University)

13:15 HTS Magnet with Smart Insulation Method - Young-Sik Jo (Korea Electrotechnology Research Institute)

13:15 Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors - Tommaso Bagni (University of Twente)
AC Losses
AC Losses
13:15 - 15:00
Contributions

13:15 Modeling of AC losses in the CS and TF conductors for the ITER Project - Marco Breschi (University of Bologna, Italy)

13:15 AC Loss Measurement of High-Tc Superconducting Coils Wound by Stacked Conductors under the Various Electro-magnetic Conditions - Shuma Kawabata (Kagoshima University)

13:15 Experimental Research of AC Ripple Losses in A High Temperature Superconducting Current Lead of A Magnet - Hongwei Liu (North China Electric Power University)

13:15 Influence of the modeling depth and voltage level on circulating currents in parallel conductors of a PMSM - Florian Birnkammer (Universitaet der Bundeswehr Muenchen)

13:15 Measurement of AC Losses of HTS Conductors on Round Core with Filamentary Strands - Kyeongdal Choi (Korea Polytechnic University)

13:15 AC Loss Properties of Stacked Multifilamentary REBCO Superconducting Tapes - Tetsuya Ito (Kyushu University)

13:15 Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor - Guangwei Liu (Shenyang University of Technology)

13:15 A Digital Electrometric Method for Measuring the AC loss of a HTS Coil - Li Ren

13:15 Suppression of Flux Creep in HTS Coil by Applying Low AC Magnetic Field - Kazuhiro Kajikawa (Kyushu University)

13:15 Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors - Yusuke Sogabe (Kyoto University)

13:15 Magnetization loss in REBCO Roebel cables with varying strand numbers - Wei Zhou (School of Electrical Engineering, Beijing Jiaotong University)

13:15 Additional AC loss properties of REBCO superconducting two-strand parallel conductors - Soichiro Oki (Kyushu University)

13:15 A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils - So Noguchi (Hokkaido University)

13:15 Modeling of magnetization loss in HTS tape exposed to all magnetic field direction - Jun Ogawa (Niigata University)

13:15 AC Loss of a Quasi-isotropic Strand Stacked by 2G Wires by Numerical Simulation in Cryogenic Temperature - Changtao Kan

13:15 Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet - Edgar Berrospe-Juarez (Universidad Nacional Autónoma de México)
15:00 Other Fusion Magnets
Other Fusion Magnets
15:00 - 16:30
Contributions

15:00 Overview of the Present Progress on the Superconducting Magnet System of CFETR-PhaseII - Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)

15:15 Conductor Performance of Nb3Sn Sample for CFETR CSMC coil - Yu WU (ASIPP)

15:30 Design of a laser-driven kiloTesla magnetic bottle - Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)

15:45 A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator - Hans van Eck (Dutch Institute for Fundamental Energy Research (DIFFER))

16:00 A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils - Pierluigi Bruzzone (EPFL-CRPP)

16:15 Progresses in cable in conduit for fusion magnets: from ITER to DEMO - Davide Uglietti
Nb3Sn Quadrupole Magnets for Accelerators
Nb3Sn Quadrupole Magnets for Accelerators
15:00 - 16:30
Contributions

15:00 Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade - Daniel Cheng

15:15 Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade - Stoyan Stoynev (FNAL (US))

15:30 Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade - Hugo Bajas (CERN)

15:45 Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC - Susana Izquierdo Bermudez (CERN)

16:00 Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation - Giorgio Ambrosio (Fermilab)

16:15 Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles - Eddie Holik (Fermilab)
Quench Detection and Protection Systems - II
Quench Detection and Protection Systems - II
15:00 - 16:30
Contributions

15:00 Performance of the quench protection system of the first LARP-CERN quadrupole magnet models - Emmanuele Ravaioli (LBNL)

15:15 Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers - Junjie Jiang (Shanghai Jiao Tong University)

15:30 LTS-HTS Hybrid Dipole Magnet Quench Protection System - Piyush Joshi (Brookhaven National Laboratory)

15:45 E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets - Jeroen Van Nugteren

16:00 Quench protection of HTS coil composed of multiple pancake-coils by changing current distribution in pancake-coils - Ryuta Matsuo (Sophia University)

16:15 Quench Protection Solutions for Magnets fabricated with HTS Conductors - Michael Green (LBNL & FRIB/MSU)
16:30 Break
Break
16:30 - 17:00
17:00 Particle Detector Magnets
Particle Detector Magnets
17:00 - 18:30
Contributions

17:00 Superconducting Detector Magnets for CERN’s Future Circular Collider - Herman Ten Kate (CERN)

17:15 PENeLOPE: testing a one-of-a-kind neutron storage magnet - Rüdiger Picker (TRIUMF)

17:30 High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search - Ramesh Gupta (BNL)

17:45 Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector - Jaemin Kim (SuNAM Co., Ltd.)

18:00 Design, Manufacture and Testing of a Pair of Superconducting Solenoids for the Upgrade of the Neutron Spin-Echo Spectrometer J-NSE at the Research Reactor FRM II (Munich) - Cristian Boffo (Babcock Noell)

18:15 Operational Experience with the MICE Spectrometer Solenoid System - Sandor Feher (Fermi National Accelerator Lab. (US))
Joints and AC loss for Fusion Magnets
Joints and AC loss for Fusion Magnets
17:00 - 18:30
Contributions

17:00 Performance of the ITER CS joints - Boris Stepanov

17:15 Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling

17:30 Qualification Program of Joints for ITER Coils - Y. Ilyin (ITER IO)

17:45 Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors - Satoshi Ito (Tohoku University)

18:00 Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling - Jianfeng Huang (University of Twente)

18:15 Analyses of the ITER Poloidal Coil joints cold test results. - Andrei Baikalov (ITER Organization)
Resistive and Pulsed High-field Magnets
Resistive and Pulsed High-field Magnets
17:00 - 18:30
Contributions

17:00 Recent Magnet and Material Development at the Pulsed Field Facility – NHMFL - Doan Nguyen (LANL)

17:15 Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center - Liang Li

17:30 Design and tests of the 100 T triple coil at LNCMI - Jérôme Béard (LNCMI-CNRS-UPS-INSA-UGA)

17:45 Design and Operation of the Pulsed Magnets at the Dresden High Magnetic Field Laboratory - S. Zherlitsyn (Hochfeld-Magnetlabor Dresden (HLD-EMFL), Helmholtz-Zentrum Dresden-Rossendorf, D-01314 Dresden, Germany)

18:00 Design for an Upgrade of the NHMFL 32-mm Bore Resistive Magnet - Jack Toth (NHMFL)

18:15 60 Tesla Pulse Coil Design and Manufacturing Facility - Todd Adkins (NHMFL)
18:30 Free evening
Free evening
18:30 - 19:00
Thursday 31 August 2017

08:00 Registration Desk open from 8:00 to 18:30
Registration Desk open from 8:00 to 18:30
08:00 - 08:20

08:20 Exhibition Open from 9:00 to 18:00
Exhibition Open from 9:00 to 18:00
08:20 - 08:45
08:45 Magnets for Future Accelerators
Magnets for Future Accelerators
08:45 - 10:30
Contributions

08:45 [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps - Lucio Rossi (CERN)

09:15 Status of the 16 T dipole development programme for a future hadron collider - Davide Tommasini (CERN)

09:30 Cold powering test results of the Nb3Sn FRESCA2 block coil magnet - Gerard Willering (CERN)

09:45 The US Magnet Development Program for High Field Accelerator Magnet R&D - Soren Prestemon (Lawrence Berkeley National Laboratory)

10:00 Design, Construction and Test of HTS/LTS Hybrid Dipole - Ramesh Gupta (BNL)

10:15 High-field dipoles using superconducting cable-in-conduit - Peter McIntyre (Texas A&M University)
Cryogenics & Auxiliary Technologies
Cryogenics & Auxiliary Technologies
08:45 - 10:30
Contributions

08:45 A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K - Philip Michael (MIT Francis Bitter Magnet Laboratory)

09:00 The Study of Pulsed Strong Magnetic Field Measurement System based on Distributed Magnetic Field Sensors - Zhenhua Li (China Three Gorges University, College of Electrical Engineering & New Energy, Yichang, China)

09:15 Temperature dependent behaviour of a barrel-type HTS dynamo - Zhenan Jiang (Robinson Research Institute)

09:30 Design and Test of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine - Jiuce Sun (KIT)

09:45 CRYOGENIC ENVIRONMENTS FOR QUANTUM TECHNOLOGIES - Ziad Melhem (Oxford Instruments NanoScience)

10:00 Hub- and Site-cooling of MRI magnets using a mobile cryogenic system - Anders Mortensen (Siemens Magnet Technology)

10:15 Cryogenics Engineering for Superconducting Magnets at DEMACO - Rossi Mendez (Sales Engineer )
Nb3Sn, BSCCO & MgB2 Conductors
Nb3Sn, BSCCO & MgB2 Conductors
08:45 - 10:30
Contributions

08:45 Nb3Sn strand designs and heat treatments for high field magnet applications - Michael Field (Bruker OST)

09:00 Advanced tube type Nb3Sn conductor and its applications in Hyper Tech - Xuan Peng (Hyper Tech Research Inc.)

09:15 Effect of strand diameter, magnetic field and injection length on the current entrance length of internal tin strand - Chao Zhou (U)

09:30 Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets - Vito Lombardo (Fermi National Accelerator Laboratory)

09:45 Recent Progress of Application-Oriented DI-BSCCO Wires - Takayoshi Nakashima (Sumitomo Electric Industries, Ltd.)

10:00 Present status of Bi-2212 conductor technology - David Larbalestier (National High Magnetic Field Laboratory)

10:15 MgB2 cables from wires made PIT and IMD process. - Pavol Kováč (Institute of Electrical Engineering of SAS)
10:30 Break
Break
10:30 - 11:00
11:00 HTS Insert and Model Magnets
HTS Insert and Model Magnets
11:00 - 12:45
Contributions

11:00 Electromagnetic Design of HTS insert for NMR Magnet in Consideration of Screening Currents - Yi Li (Intitute of Electrical Engineering, Chinese Academy of Sciences)

11:15 HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2 - Jeroen Van Nugteren

11:30 Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet - Thomas Painter (Magnet Science & Technology-NHMFL)

11:45 Compact, high field coils made with strong, rectangular Bi2212 superconductor wire - Alexander Otto (Solid Material Solutions, LLC)

12:00 High Field Coil Technology with Bi-2212 Round Wire - Ulf Trociewitz (NHMFL)

12:15 Performance of two-ply four-filaments Gd123 tape coil - Satoshi Awaji (HFLSM, IMR, Tohoku University)

12:30 Characterisation of HTS insulated coil for high field insert - Tara Benkel (CNRS)
Joints for HTS and MgB2 & other Materials for Magnets
Joints for HTS and MgB2 & other Materials for Magnets
11:00 - 12:45
Contributions

11:00 Measurement of persistent current Gd123 coil for superconducting joint fabricated by CJMB method - Xinzhe Jin (Muroran Institute of Technology)

11:15 10 kA joints for Multi-Tape HTS Cables - Jaakko Samuel Murtomäki (Tampere University of Technology (FI))

11:30 Contact resistance between REBCO tapes coated with a thin resistive layer - Jun Lu (NHMFL)

11:45 High Modulus Reinforcement Materials - ke han

12:00 Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet - Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

12:15 Open Material Property Library With Native Simulation Tool Integrations (OpMaST) - Antti Aleksis Stenvall

12:30 Superconducting HTS joints for connecting strong Bi2212 wires - Alexander Otto (Solid Material Solutions, LLC)
Multiphysics Design and Analysis for Different Magnet Applications
Multiphysics Design and Analysis for Different Magnet Applications
11:00 - 12:45
Contributions

11:00 Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet - Emmanuele Ravaioli (LBNL)

11:15 Errors and optics study of a permanent magnet quadrupole system - Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)

11:30 Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation - Bernhard Auchmann (CERN)

11:45 An Engineering Perspective on Ultra High-Field Magnets - Andrew Twin

12:00 Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils - Ernesto Bosque (NHMFL-ASC)

12:15 Ultimate Forces of the Grenoble Hybrid Magnet - Hans Schneider-Muntau (S-M CS&T)

12:30 LEDET-ANSYS coupled modeling of transients in superconducting magnets - Lucas Brower (LBNL)
12:45 Lunch
Lunch
12:45 - 13:45
13:45 Accelerator Magnets
Accelerator Magnets
13:45 - 15:30
Contributions

13:45 Design, fabrication and test of a 2 T superconducting dipole prototype by using tilted solenoids - Yuquan Chen

13:45 Applied metrology in the production of superconducting model magnets for particle accelerators - Jose Ferradas Troitino (Centro de Investigaciones Energéti cas Medioambientales y Tecno)

13:45 Prototype Design of the Dipole for EMuS at CSNS - Yuan Chen

13:45 Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications - Jeroen Van Nugteren

13:45 Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet - Jeyull Lee (Yonsei University)

13:45 Fabrication and Measurement of New Inflector for g-2 - Steve Krave (Fermilab)

13:45 Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit - Mateusz Jakub Bednarek (CERN)

13:45 Construction and Testing of Curved ReBCO Coils - Stephen Kahn (Muons, Inc.)

13:45 Analysis of the Training Behaviour of the MICE Spectrometer Solenoid - Holger Witte (Brookhaven National Laboratory)

13:45 Study of a Sextupole Round Coil Superferric Magnet - Samuele Mariotto (University of Milan - INFN Milan)

13:45 A Study on the Sextupole Design with Iron Yoke inside Solenoids for 56 GHz ECR Ion Source - Shaoqing Wei (Uiduk University)

13:45 Development of 7 T superconducting solenoid magnet for Electron Beam Ion Source - Su-Hun Kim (Kyungpook National University)

13:45 A Study of Irradiation Effects on Thermal Characteristics of COMET Pion Capture Solenoid - Ye Yang (Kyushu University)

13:45 Design of a cosine-theta dipole magnet considering influence of shielding-current-induced field on field quality - Yusuke Sogabe (Kyoto University)
Fusion Magnets: Design and Analysis
Fusion Magnets: Design and Analysis
13:45 - 15:30
Contributions

13:45 Thermo-hydraulic analysis of The KSTAR PF cryogenic loop using SUPERMAGNET CODE - HyunJung Lee (National Fusion Research Institute)

13:45 Advanced mathematical model of ITER PF1 coil for manufacture quality control - Valery Belyakov (JSC "NIIEFA")

13:45 STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN - Louis ZANI (CEA-IRFM)

13:45 DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field - Rainer Wesche (EPFL - SPC)

13:45 Further development of fusion enabling systems in Russia: suggestions on superconductors and current leads for DEMO-FNS facility. - Sergey Lelekhov (Russian ITER Center)

13:45 Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF - Yawei HUANG (CEA Saclay)

13:45 ON A FULL 3D THERMAL STRUCTURAL AND HYDRAULIC FINITE ELEMENT MODEL OF THE JT-60SA TOROIDAL FIELD COILS - Valerio Tomarchio (Fusion For Energy)

13:45 High Temperature Superconductors for Fusion Nuclear Science Spherical Tokamak - Yuhu Zhai (Princeton Plasma Physics Laboratory)

13:45 Analysis of a protected Loss Of Flow Accident (LOFA) in the ITER TF coil cooling circuit - Laura Savoldi (Politecnico di Torino)

13:45 Development of a 2D simplified tool for the analysis of the cooling of the ITER TF winding pack - Francesca Cau (Fusion for Energy, F4E, Barcelona, Spain)

13:45 Design, Construction and Testing of Reduced Insulation Solenoids for Fusion - Yuhu Zhai (Princeton Plasma Physics Laboratory)

13:45 Numerical Simulation of Thermal Behavior In a No-insulation Toroidal Magnet - Yi Zhang (Huazhong University of Science and Technology)

13:45 A momentum-preserved node concept for thermohydraulic analysis of fusion magnet - Sangjun Oh (NFRI)

13:45 Nonlinear multiscale structural analysis of a superconducting coil and support structure for the helical fusion reactor - Hitoshi Tamura (National Institute for Fusion Science)

13:45 Optimization of structural performance of the toroidal field coil system of a tokamak - Ilia Ivashov (Forschungszentrum Jülich GmbH)

13:45 LAMINAR SUPERCONDUCTING WINDINGS - Evgeny Klimenko (SSC RF TRINITI)

13:45 Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO - Roser Vallcorba (CEA Saclay)

13:45 An Electromagnetic and Structural Finite Element Model of the ITER TF Coils - Gabriele D'Amico (Fusion For Energy)

13:45 PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE - Sylvie NICOLLET (CEA)
Wigglers, Undulators and Fast Cycling Accelerator Magnets
Wigglers, Undulators and Fast Cycling Accelerator Magnets
13:45 - 15:30
Contributions

13:45 Design and magnetic measurements of a hybrid wiggler for SR research program at VEPP-4 - Grigory Baranov (Budker Institute of Nuclear Physics)

13:45 Fast Cycling Superconducting Quadrupole - Sergey Kozub (Institute for High Energy Physics)

13:45 Test results of the first superconducting undulator prototype at the SSRF - Yi Ding (SINAP CAS)

13:45 Low temperature Hall probe calibration system for the TPS cryogenic permanent magnet undulator - Cheng-Ying Kuo (NSRRC)

13:45 Testing of the superconducting magnets for the SIS100 - Anna Mierau (GSI)

13:45 Cable-in-Conduit Dipoles for the Ion Ring of JLEIC - Peter McIntyre (Texas A&M University)

13:45 Full Scale Conduction Cooled Superconducting Undulator Coils – Training, Stability and Thermal Behavior - Andreas Grau (Karlsruhe Institute of Technology, Institute for Beam Physics and Technology)

13:45 Design of a Short Period Permanent Magnet Helical Undulator - Cheng-Ying Kuo (NSRRC)

13:45 Eddy currents analysis of dipole magnets of booster ring at HIAF project - Qiang Hu (Institute of Modern Physics of Chinese Academy of Science)

13:45 Constructing a permanent magnet phase shifter - Chih-Sheng Yang (National Synchrotron Readation Research Center)

13:45 Dynamic Behaviour of Laminated Magnets with Solid Tension Bars - Thomas Zickler (CERN)

13:45 Improvement of Field Simulation Concept of Staggered Undulator with HTS YBCO Bulk - S.D. Chen (National Synchrotron Radiation Research Center)
Magnets for MRI
Magnets for MRI
13:45 - 15:30
Contributions

13:45 The trapped magnetic field of a joint-less second-generation high temperature superconducting coil. - Yali Zheng (Luoyang Normal University)

13:45 Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil - Byeong-ha Yoo (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:45 Estimation method of optimal amount of overshooting current for temporally uniform magnetic field in a conduction-cooled ReBCO coil for MRI applications - Hideaki MIURA (Tohoku University)

13:45 Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet - Hervé Lannou (CEA)

13:45 The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology - Antoine DAEL (CEA)

13:45 Magnetic Field Stability Improvement of HTS-MRI Magnet under Power Supply Driven Operation with a Micro Current Trimming Control - Takeshi Kawashima (Kyoto University)

13:45 Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems - Michael Tomsic (Hyper Tech Research Inc.)

13:45 Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires - Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:45 Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening - Peter McIntyre (Texas A&M University)

13:45 A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options - Dongkeun Park (Massachusetts Institute of Technology, Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center)

13:45 Performance test of 1.5 T cryogen free orthopedic MRI magnet - Valeriy Lysenko (Lebedev Physical Institute of the Russian Academy of Sciences)

13:45 ENLARGED BORE 11.74T MAGNET FOR BRAIN RESEARCH APPLICATION - Gabriella Norcia (ASG Superconductors S.p.A.)

13:45 FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor - Milan Majoros (The Ohio State University)
Motors - IV
Motors - IV
13:45 - 15:30
Contributions

13:45 Stress Analysis of Induction Motor Core Considering Anisotropic Magnetic and Magnetostrictive Properties - Tong Ben (Hebei University of Technology)

13:45 Sensorless Control of Bearingless Permanent Magnet Synchronous Motor Based on MRAS - Chenyin Zhao

13:45 Starting Control Strategy of Bearingless Permanent Magnet Synchronous Motor - Wei Pan (Jiangsu University)

13:45 Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics - Gyeong-Jae Park (Sungkyunkwan Univeristy)

13:45 Structural Design Methodology of BLDC Motor Considering Response Time of Phase Current - Wonseok Han (Sungkyunkwan University)

13:45 Investigation of SMPM Motor with Segmented Eccentric Magnet Pole - Libing Jing

13:45 A Novel Partitioned Stator Flux-Reversal Memory Machine - Jiaming Jiang (Southeast University, China)

13:45 Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization - Gyeong Jae Park

13:45 Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter - Min Hyeok Kang (Jeju National University)

13:45 Characteristic Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density - Sooyoung Cho (Hanyang University)

13:45 HEV Motor Comparison of IPMSM with Sintered Rare-Earth Mangnet and Bonded Dy Free Injection Magnet in the Same Size - Yo Han Hwang (Hanyang University)

13:45 Study on Vibration Characteristics of Permanent Magnet Synchronous Motor with Demagnetization of Permanent-magents - Dong-woo Kang (Keimyung University)

13:45 The Investigation of Cogging Torque Reduction Technologies - YC Kim (Hanyang University)

13:45 A Spoke-Type PM Vernier Machine with Multi Working Harmonics and Enhanced Flux Modulation Effect - Tianjie Zou (Huazhong University of Science and Technology)

13:45 Analysis of the Nonlinear Characteristics of Magnetic Circuit in a Balanced Armature Receiver - Dan-Ping Xu (School of Mechanical Engineering, Pusan National University)

13:45 A Study on the Auto-MTPT Algorithm to Make the Speed-based Current-map of IPMSM for Traction of Inwheel - Yo Han Hwang (Hanyang University)

13:45 Research on demagnetization-resistant structure of synchronous motor performance using Nd-permanent magnets reduced heavy rare earth metals - Dong-woo Kang (Keimyung University)

13:45 Direct Control of Bearingless Permanent Magnet Slice Motor Based on Flux Linkage Observer Using Phase-locked Loop - Yuemei Qin (Jiangsu university)

13:45 Analysis of Magnetic Stiffness in a Balanced Armature Receiver Considering the Effects of Soft Magnetic Material Saturation - Dan-Ping Xu (School of Mechanical Engineering, Pusan National University)

13:45 Improvement of Reluctance Torque in Fault-Tolerant Permanent-Magnet Machines with Fractional-slot Concentrated-Windings - Xinxing Zhang (JiangSu University)

13:45 Analytical approach to maximize the torque density with size constraints for PMSM - KIDOEK LEE (Korea Electronics Technology Institute)

13:45 Design of a Non Rare Earth Spoke Type Permananet Magnet Motor for Considering Magnetization after Assembly - Jae-Kwang Lee (hanyang university)

13:45 A Multi-Tooth Axial Field Flux-Switching Hybrid Excitation Machine - Li Hao (Southeast University)

13:45 Study on Design of a Novel Magnetic Field Modulation Linear Primary Permanent Magnet Synchronous Motor - Guangwei Liu (Shenyang University of Technology)

13:45 Thermal limit curve calculation for squirrel cage induction motor based thermal equivalent circuit - Jae-Kwang Lee (hanyang university)

13:45 Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives - Kyoung-Jin Joo

13:45 Torque Control of IPMSM considering actual controller and driving condition - Kyoung-Jin Joo

13:45 Decoupling Control of Bearingless Permanent Magnet Synchronous Motor Using ANFIS Inverse System - Wei Du (Jinagsu university)

13:45 Influence of Stator Structure on the Static Characteristics in Axial Field Flux Switching Permanent Magnet Machine - Li Hao

13:45 Methodology of Incorporating Mechanical and Electromagnetic Characteristics Analysis for Separated Pole-Piece Type Ferrite Magnet Motor - Won-Ho Kim (Gachon University)
Generators
Generators
13:45 - 15:30
Contributions

13:45 Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 A Two-dimensional Equivalent Mode of a Homopolar Synchronous Machine - Liang Xin (Huazhong University of Science and Technology)

13:45 Optimization Design and Forecast Direct Control System Research on Bearingless Permanent Magnet Synchronous Generator - Chenyin Zhao

13:45 Design and thermal analysis of an HTS module coil for a 12 MW wind power generator - Tat Thang Le (Changwon National University)

13:45 Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 Research on an Asymmetric-primary Hybrid-excitation Maglev Axis-flux Generator for the Vertical Axis wind Turbine - Lei Huang (Southeast University)

13:45 Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators - Gi-Dong Nam (Changwon National University)

13:45 Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator - Kyoung-Jin Joo

13:45 Core Loss Analysis of Permanent Magnet Linear Synchronous Generator with Slotless Stator - Chang-Woo Kim (Chungnam National University)

13:45 Electrical analysis for 15MW REBCO designed wind turbine generators - Kiwook Yun (Kyushu university)

13:45 Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion - Lei Huang (Southeast University)
Novel Applications
Novel Applications
13:45 - 15:30
Contributions

13:45 Improved Design of Klystron Beam Focusing System with Permanent Magnets - Yasuhiro Fuwa (Kyoto University)

13:45 Analytical methodology for efficient design of pulsed electromagnetic blank holding system - Zhipeng Lai (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)

13:45 Development of Test Device for Aluminum Metal Melting by Electromagnetic Induction Heating Using HTS Coils - Satoshi Fukui (Niigata UYniversity)

13:45 Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots - Rong Guo (School of Electrical Engineering, Southeast University)

13:45 A Method to Improve Forming Accuracy in Electromagnetic Forming of Sheet Metal Based on Field Shaper - Qi Xiong (China)

13:45 Design and Performance Study of a 1 MW Induction Heater with HTS DC magnet - Ping Yang (Shanghai Jiao Tong University)

13:45 A Novel Design of Repetitive Transcranial Magnetic Stimulator with Monophasic and Biphasic Waveform - Jinxin Zuo (Huazhong University of Science and Technology)

13:45 Principle and realization of an electromagnetic pulse welding system with a dual-stage coil - Fangxiong Deng

13:45 Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance - Zuoshuai Wang

13:45 Development of a low temperature superconducting magnet with MgB2 wire for a 10 kW DC induction furnace - Chankyeong Lee (Changwon National University)
ReBCO Conductors: Properties and Characterisation
ReBCO Conductors: Properties and Characterisation
13:45 - 15:30
Contributions

13:45 Temperature Evolution of Pinning Force in GdBaCuO Coated Conductors with Artificial Pinning Centers - Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))

13:45 The angular and Field Dependence of the Critical Current of commercial YBCO coated conductors - Xiuchang Zhang (University of Cambridge)

13:45 Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current - Daoyu Hu (Shanghai Jiao Tong University)

13:45 Simulation of the delamination behaviors in the 2G HTS tape with consideration of thermal stress - Yujie Duan

13:45 Enhancement of crystallinity and critical current properties of fluorine-free MOD processed YBCO films by introduction of oxyhalide Ba2Cu3O4X2 (X = Cl, Br) - Takanori Motoki (Aoyama-Gakuin Univ., JST-ALCA)

13:45 Effect of Background Magnetic Field on the Critical Current Degradation under Tensile Fatigue Loading for YBCO Tapes - Xinsheng Yang (Southwest Jiaotong University)

13:45 Threshold value analysis of YBCO tapes under transient over-current impulse - Shizhuo Liu (Applied Superconductivity Key Lab, Institute of Electrical Engineering, CAS, Being, 100190, China 2University of Chinese Academy of Sciences, Beijing, 100190, China and University of Chinese Academy of Sciences, Beijing, 100190, China)

13:45 Repair method of locally defective or damaged coated conductor using the superconducting patch - Rock Kil Ko (Korea Electrotechnology Research Institute)

13:45 Study on the Transport Current Properties for the 2G HTS Wire Under the Spray Cooling Method - Ho Ik Du (Chonbuk National University)

13:45 Bending-peeling method to measure interface strength of YBCO tape - Qiuliang Wang

13:45 Transport properties of commercially available REBCO conductors at 4.2 K - Kazuki Norimoto (Sophia University)

13:45 Pinning Force and critical properties in YBa2Cu3O7-δ - Brahim LMOUDEN (Ibn Zohr University, faculty of science)

13:45 Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method - Takumi Suzuki (Kyushu University)

13:45 The effect of compositional ratio of SmBCO coated conductor on the superconducting properties. - Gwan-tae Kim (Korea Electrotechnology Research Institute)

13:45 Influence of picosecond and femtosecond laser impact on magnetic and transport characteristics of the HTS tape - Sergei Pokrovskii (National Research Nuclear University MEPhI)

13:45 Characterization of an internal cooling high temperature composite superconductor with REBCO for large scale energy storage applications - Jiahui Zhu (China Electric Power Research Institute)
Quench Detection and Protection Systems
Quench Detection and Protection Systems
13:45 - 15:30
Contributions

13:45 A fast 10 kA current switch for High Temperature Superconductor accelerator magnets - Marco Statera (INFN Milano - LASA)

13:45 Partial isolation quench protection method for YBCO SMES magnet - Qixing Sun

13:45 Quench protection of an MgB2-based MDS magnet system - Wouter Kühlkamp (University of Twente)

13:45 Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit - Seunghyun Song (Electrical and Electronic Engineering, Yonsei University)

13:45 A novel quench detection method using radio frequency wave technology - Hu Yanlan (Institute of plasma physics chinese academy of science)

13:45 24kA DC Energy Extraction Switch for LARP Magnet Testing at BNL - Piyush Joshi (Brookhaven National Laboratory)

13:45 Study on the Quench Protection of the HTS magnet with iron core for a 1MW DC Induction Heater - Ping Yang (Shanghai Jiao Tong University)

13:45 Quench Detection Performance of the Magnet Safety System for the inductively coupled KATRIN Source Magnets - Woosik Gil (Institute for Nuclear Physics (IKP), Karlsruhe Institute of Technology (KIT))

13:45 Self-monitoring, SMART REBCO coated conductors - Federico Scurti (NCSU)

13:45 Effects of metallic coatings on the thermal sensitivity of optical fiber sensors at cryogenic sensors - Federico Scurti (NCSU)

13:45 Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source - Emmanuele Ravaioli (LBNL)

13:45 Experimental evaluation of computer-aided quench detection for the KSTAR CS Coil - yong chu

13:45 Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes - Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)

13:45 Design and Analysis of an Energy-Extraction System for High Current HTS Magnets - Janne Ruuskanen (Tampere University of Technology)

13:45 An FPGA-based Quench Detector and Data Acquisition System for Superconducting Insertion Devices - Chun-Yi Wu (National Synchrotron Radiation Research Center)

13:45 Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements. - Gerard Willering (CERN)

13:45 Numerical and Experimental Evaluations of the Quench Detection Performance of NbTi/YBCO Hybrid Tape - Shin Hasegawa (Tohoku University)

13:45 New method for magnet protection systems based on a direct current derivative sensor - Ernesto De Matteis (CERN)
Magnetization and Field Quality
Magnetization and Field Quality
13:45 - 15:30
Contributions

13:45 Influence of E-J characteristics of coated conductors and field ramp-up rates on the shielding-current-induced fields of magnets - Yang Li (Kyoto University)

13:45 Torque Maximization Method of Radial Magnetized Surface-Mounted PM Machine Having Sinusoidal Shaped Pole - shuangjiang zhuang (Naval University of Engineering)

13:45 Novel Cavity Feature On Dipole Magnet Pole Face Improves Field Homogeneity While Reducing Coil Complexity - Christopher Yeckel (Stangenes Industries)

13:45 Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape - Hiroshi Ueda (Okayama University)

13:45 A method based rotating coil to find magnetic center for series quadrupole magnets at IMP - Wenjie Yang (colleague)

13:45 Mu2e Solenoid Field Mapping System Design - Sandor Feher (Fermi National Accelerator Lab. (US))

13:45 Magnetic Field Measurement and Analysis of the CSNS/RCS Quadrupole Magnets - Li Li

13:45 Numerical modelling of iron-pnictide bulk superconductor magnetization - Mark Ainslie (University of Cambridge)

13:45 Influence of Soft Ferromagnetic Section on Trapped Field of High Temperature Superconducting Bulk Magnet used for linear motor application - Junjie Tang

13:45 Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K - Derong Qiu (Shanghai Jiao Tong University)

13:45 Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape - Atsushi Ishiyama (Waseda University)

13:45 Numeric Analysis of the Rib geometry effect on multipole magnetic fields - Seong Yeub Shim (GSI)

13:45 Waveform conditioning problems in high frequency magnetization of nanocrystalline alloys - Long Chen (Hebei University of Technology)

13:45 Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet - Young Jin Hwang (Korea Basic Science Institute)

13:45 Field Mapping System for a 230 MeV Superconducting Cyclotron - Tianjue Zhang (China Institute of Atomic Energy)

13:45 Hall probe Calibration System Design for the Mu2e Solenoid Field Mapping System - Charles Orozco (FNAL)

13:45 A field mapper for the determination of the multipole components of the curved HESR dipole magnets - Helmut Soltner (Forschungszentrum Jülich GmbH)

13:45 Investigation on Optimal Third-order Harmonic Shaping Method for Parallel Magnetized Surface-Mounted PM Machine - yang shen (Naval University of Engineering)

13:45 Reduction of the screening current field in HTS coils wound by using Soldering-Stacked-Square (3S) REBCO wires - Zhuyong Li

13:45 Simulation of Screening Current Reduction Effect of External AC Magnetic Field on Multi-turn REBCO Pancake Coils - Ryosuke Miyao (Hokkaido University)
Novel Diagnostics
Novel Diagnostics
13:45 - 15:30
Contributions

13:45 A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes - Mario Kazazi (Cea Saclay)

13:45 Design of dipole magnet integral measurement system for HTPTF - Jun Yang (Huazhong University of Science and Technology)

13:45 Design and manufacture of Solenoid center deviation measurement device - Xi Wu

13:45 Accurate Measurement of the Superconducting Current in 2G HTS Coil with Rogowski coil in Cryogenic Environment - Wei Wang (Sichuan University)

13:45 The Mu2e Solenoid Cold Mass Position Monitor System - Thomas Strauss (Fermilab)

13:45 A multifunction test facility of cryogenic-electro-magneto- mechanical properties for superconducting wires/tapes under multi-fields - Xingzhe Wang (Lanzhou University)

13:45 Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils - So Noguchi (Hokkaido University)

13:45 New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications - Alexey Dudarev (CERN)

13:45 Locating Electrical Faults in Superconducting Accelerator Magnets - Andrzej Stafiniak

13:45 Delamination Diagnostic Method of REBCO Tapes Using Ultrasonic Waves - Takahiro Tomitsuka (Meiji University)

13:45 A set of equipment for measuring and investigating the magnetic field at the reference magnet of the NICA booster - Ivan Okunev (BINP SB RAS)

13:45 Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field - Pierluigi Bruzzone (SPC)

13:45 High-speed thermal imaging of quench propagation in HTS tapes using temperature-sensitive fluorescent films - Roland Gyuráki (Karlsruhe Institute of Technology)
15:30 Break
Break
15:30 - 16:00
16:00 Superconducting Generators for Wind Power
Superconducting Generators for Wind Power
16:00 - 16:40
Contributions

16:00 Development of a Superconductive Wind Power Generator within the EcoSwing project - Juergen Kellers (ECO 5 GmbH)
16:40 Magnets for High Energy Physics
Magnets for High Energy Physics
16:40 - 17:20
Contributions

16:40 High Field Accelerator Magnets: a Path to New Physics - Luca Bottura (CERN)
17:20 Conference Closing
Conference Closing
17:20 - 18:00
Contributions

17:20 Best Posters Awards

17:30 MT25 Conference Data

17:40 Introduction to MT26 in Vancouver

17:50 Technical Visits, Banquet and Closing of MT25
18:00 Boat Tour Amsterdam; from the Conference Center to the Banquet at the Maritime Museum
Boat Tour Amsterdam; from the Conference Center to the Banquet at the Maritime Museum
18:00 - 19:30

19:30 Banquet in National Maritime Museum
Banquet in National Maritime Museum
19:30 - 22:00
Friday 1 September 2017

08:00 Technical Visits scheduled starting at the square in front of the RAI Conference Center
Technical Visits scheduled starting at the square in front of the RAI Conference Center
08:00 - 08:30

08:30 1. Technical Visit 1 to NIKHEF - Amsterdam
1. Technical Visit 1 to NIKHEF - Amsterdam
08:30 - 12:30

08:31 2. Technical Visit 2 to ESTEC - Noordwijk
2. Technical Visit 2 to ESTEC - Noordwijk
08:31 - 13:01

08:33 3. Technical Visit 3 to Philips HealthCare and DIFFER - Eindhoven
3. Technical Visit 3 to Philips HealthCare and DIFFER - Eindhoven
08:33 - 18:00

4. Technical Visit 4 to HFML & FELIX - Nijmegen
4. Technical Visit 4 to HFML & FELIX - Nijmegen
08:33 - 17:30

08:34 5. Technical Visit 5 to Applied Superconductivity and Cyogenics Group and MESA+ at University of Twente - Enschede
5. Technical Visit 5 to Applied Superconductivity and Cyogenics Group and MESA+ at University of Twente - Enschede
08:34 - 18:00

18:00 End of MT25 Conference
End of MT25 Conference
18:00 - 18:30

Choose timezone