Repetitive Flat-top Pulsed High Magnetic Field (RFPHMF) could widely be applied to biology, materialogy, iatrology, condensed matter physics, and many industrial applications. Nowadays, the development direction of the RFPHMF focuses on accelerating the magnetic field establishment, elevating the pulse amplitude, extending the pulse duration, enhancing the flat-top precision, boosting the...
Programmable logic and integrated technologies, as SoC, FPGA and DSP, have became mature enough to be employed in high performance magnet power supply applications. The use of a configurable mixed current and voltage digital control, combined with adaptable complex algorithms for protections (e.g. quench in superconducting magnets) and auxiliary integration (e.g. transverse flux density in a...
PHiX (Plasma with Helical field initiative eXperiments) is a small tokamak to research MHD phenomena such as restraint of elongated plasma instability and protection of tokamak devices from disruption. The device has 16 toroidal field coils (TF coils) and 10 poloidal field coils (PF coils) magnets. We found that we must drive these coils for more than 5-ms and the response of PF coil current...
High pulsed magnetic field is an important basic research tool, which has been used more and more widely in physics, biology and materials. Higher magnetic field can provide more opportunities for scientist to reveal new phenomena in scientific research. Aiming to achieve a higher magnetic field, Wuhan National High Magnetic Field Center (WHMFC) has designed a power supply system for 100 Tesla...
A 60T pulsed high magnetic field facility is designed for the study of magnetic material at Xi'an Jiaotong University. The pulsed high magnetic field facility is energized by two 1.2MJ/3.84mF capacitive power supplies. Each supply consists of 24 capacitor banks, a protection inductor, crowbar circuit, dump circuit. To simplify system configuration, two supplies are equipped with one charge...
With the increasing applications in physics, biology, chemistry and many other basic scientific fields, high-stability flat-top pulsed magnetic field is demanded for a higher field intensity and a lower ripple. To meet this demands, this paper proposes a hybrid power supply to generate a high-stability flat-top pulsed magnetic field at the Wuhan National High Magnetic Field Center. The hybrid...
High magnetic field technology has played an important role in basic scientific researches. High-stability flat-top pulsed magnetic field can meet the demands of high field intensity and high stability in modern scientific experiments. The higher stability of flat-top magnetic field would be the more benefit to the observation of experimental phenomena (such as specific heat measurement and...
This paper studies the use of a novel high stability of power supply used in superconducting system, this power supply with high stability, low output current ripple characteristics. Also, the slope slew of raising and failing were be change through the firmware in order to satisfy the operation of the system. The superconducting coil wingding has a total length magnetic period of 56.56cm,...
A 100 MVA/100 MJ flywheel pulse generator system with the characteristics of high energy density and good control performance has been developed to energize the pulsed magnet at the Wuhan National High Magnetic Field Center (WHMFC). To realize the flexible, accurate, real-time and safe remote monitoring of the pulse generator system, a set of monitoring system using the total control plus...
The 45 T hybrid magnet project is developed by High Magnetic Field Laboratory in Nijmegen, Netherlands from an existing 22 MW power supply for its resistive magnet and a new 20 kA current source for the outer superconducting magnet. With 10 V load voltage it requires half an hour to charge to full current. The current source is fed from the 400 V mains and consists of a 12-pulse topology (4x3...
The requested beam precision of the Facility for Antiproton and Ion Research (FAIR) requires the regular calibration of the main components of the current control system such as the Zero-Flux Direct Current-Current Transducer (DCCT) and the analogue-to-digital converter (ADC) module at a level of 1ppm or better. To reach this goal, a dedicated calibration laboratory is designed and prepared...
A thin superconducting solenoid is used to provide magnetic field in the CMD-3 particle detector. For power supply of the solenoid a superconducting fullwave AC/DC rectifier is designed. The rectifier is a current step-up superconducting transformer with two thermally controlled superconducting switches connected to its secondary windings. The CMD-3 solenoid is indirectly cooled, so the...
High pulsed magnetic field is becoming more and more widely used in physics, biology and materials. For serving scientific experiments better, a power supply system for 100 Tesla magnetic field is designed at Wuhan National High Magnetic Field Center (WHMFC). In the preliminary design, the 100 Tesla magnet consists of three coils in a coaxial structure. The outer coil is powered by...
For the upgrade of the booster of the European Synchrotron Radiation Facility in France, an IGBT based ramping current injection system for the dipole electromagnets has been developed, delivered and commissioned. The main function of the dipole power supply is to drive the necessary voltage for an accurate 4 Hz triangular current wave injection in the electromagnets with peak value of current...
In Wuhan National High Magnetic Field Center, a new explosive DC breaker switch based on the pulsed electromagnetic forming (EMF) technology is developed to shut down the Battery Bank power supply for protecting the long pulsed magnetic field system when terrible fault happens. The switch is reformed from the aluminum wire electrical explosive switch of the Laboratoire National des Champs...
Pulse generator is one of the common power supply for flat-top pulsed magnetic field for its advantages of large energy storage and flexible control. However, some characteristics of pulse generator, such as nonlinearity and time-varying, limit the effect of measures by optimizing control strategy to improve the stability of flat-top. On the base of pulse generator power supply system for...
A magnet composed by three coaxially nested coils has been developed to generate 100 Tesla pulsed magnetic field at the Wuhan National High Magnetic Field Center (WHMFC). The flywheel generator system has great energy storage density and can control the waveform of the magnet current, therefore the outer coil is energized by a 100 MVA/100 MJ flywheel pulse generator. To reduce the magnet heat...
A facility, which will generate 100 T pulsed high magnetic field, is under development recently at Wuhan National High Magnetic Field Center (WHMFC). The pulsed magnet is composed of three coils, and driven by four power supplies of three types. The outer coil is driven by the battery bank of 1620 lead-acid batteries connected in series with the 100 MVA / 100 MJ pulsed generator, The middle...
The Grenoble steady magnetic field facility is one of the four high field facilities part of the European Magnetic Field Laboratory. The upgrade of the Grenoble facility has started in 2013 and aims in a first phase at increasing the electrical power from 24 to 30 MW and to develop the high field magnets accordingly. A new 18 MW power converter has been made available to users in 2017 and...
