2792 / 2792
- Fouad Aabid (CERN)
-
Walid Abdel-Maksoud
(CEA)
- Author in Design, Testing and Commissioning of 25.7 kA HTS Current Leads
- Author in Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility
- Co-author in [Invited] JT-60SA Magnet System Status
- Co-author in ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
- Co-author in Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- ILDAR ABDYUKHANOV (VNIINM (Bochvar Institute))
- Ildar Abdyukhanov (Bochvar Institute)
- Dmitry Abin (NRNU MEPhI)
- Dmitry Abin (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
- D.V. Abraimov (NHMFL/FSU)
-
Dmytro Abraimov
(NHMFL)
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Co-author in Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
- Co-author in Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Co-author in The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests
- Pablo Abramian (CIEMAT)
- Kazuhisa Adachi (SWCC Showa Holdings Co., Ltd.)
- Todd Adkins (National High Magnetic Field Laboratory)
- luigi affinito (ENEA)
- Nikolay Agapov (JINR)
- Ji-Hun Ahn
- Ji-Hun Ahn
- Ji-Hun Ahn
-
Min Cheol Ahn
(Kunsan National University)
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Co-author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Hee-Jae Ahn (NFRI)
- Min Cheol Ahn (Kunsan National University)
-
Donggyun Ahn
(Hanyang University)
- Co-author in HTS Magnet with Smart Insulation Method
- Xin AI (CHMFL)
- Mark Ainslie (University of Cambridge)
- Kazuya Aizawa
- Tomoyuki Akasaka (Railway Technical Research Institute)
- Andrey Akhmeteli (LTASolid, Inc.)
- Pavel Akichine (Joint Institute for Nuclear Research (JINR))
- Hamoud Alafnan (University of Bath)
- Maxim Alexeev (Bochvar Institute)
- Hervé Allain (CEA Saclay)
- John Amann (SLAC National Accelerator Laboratory)
-
Filippo Ambroglini
(INFN)
- Co-author in The limits of space radiation magnetic shielding
-
Giorgio Ambrosio
(Fermilab)
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Vadim Amelichev (SuperOx)
-
Naoyuki Amemiya
(Kyoto University)
- Author in Effect of striating coated conductors on reducing shielding-current-induced fields in pancake coils exposed to normal magnetic fields
- Co-author in Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors
- Co-author in Characteristics of an HTS dipole magnet
- Co-author in Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors
- Co-author in Design of a cosine-theta dipole magnet considering influence of shielding-current-induced field on field quality
- Co-author in Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
- Co-author in Influence of E-J characteristics of coated conductors and field ramp-up rates on the shielding-current-induced fields of magnets
- Johannes Amend (Babcock Noell GmbH)
- Victor Amoskov (JSC "NIIEFA")
- Eric Anderssen (Lawrence Berkeley National Lab. (US))
- Shinji Ando (QST)
- L. Andò (INFN-LNS)
- Thomas Andre (Synchrotron SOLEIL)
-
Andrei Mednikov
- Co-author in The PF1 coil electrical joint test results
- Andries den Ouden (Adjunct Chairman) (High Field Magnet Laboratory Nijmgen)
- Alessandro Anemona (ICAS Scrl)
-
Michael Anerella
(Brookhaven National Laboratory)
- Author in Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil.
- Author in Design, Construction and Test of HTS/LTS Hybrid Dipole
- Author in High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in 24kA DC Energy Extraction Switch for LARP Magnet Testing at BNL
- Co-author in Construction and Testing of Curved ReBCO Coils
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
-
Irina Anishenko
(NRNU MEPhI)
- Co-author in Levitation and guidance forces of CC-tape stacks
- S. Antoine (Sigmaphi Accelerator Technology)
- sylvain antoine (sigmaphi)
- Sylvain Antoine (Unknown)
- Giorgio Apollinari (Fermi National Accelerator Lab. (US))
- Giannis Apostolidis (FEAC Engineering P.C.)
- P. Aprili (Fusion for Energy)
- Mohammed Arabi (ICAS Scrl)
- Yuuki Arai (Railway Technical Research Institute)
- Yoshihiko Arakawa (Sumitomo Heavy Industries, Ltd.)
-
Diego Arbelaez
(LBNL)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Real-time functional diagnostics of superconducting magnets using acoustic techniques
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Yasushi Arimoto (High Energy Accelerator Research Organization)
-
Arjan Verweij (Program Chairman)
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation
- Author in Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
- Gonzalo Arnau Izquierdo (CERN)
-
Guy Aubert
(CEA Saclay)
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Co-author in A Wide Aperture Superconducting Vector Magnet for photon beamlines: WAVE Photons
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
-
Guy Aubert
(Université de Poitiers, Poitiers, and CEA, Saclay, France)
- Co-author in Ultimate Forces of the Grenoble Hybrid Magnet
-
Bernhard Auchmann
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation
- Author in Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
- Ignacio Aviles Santillana (University Carlos III (ES))
- Julien Avronsart (CEA)
-
Satoshi Awaji
(Tohoku University)
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Author in Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding
- Author in Performance of two-ply four-filaments Gd123 tape coil
- Author in Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions
- Co-author in Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications
- Co-author in Performance of a HTS Persistent Current System for REBCO pancake coil
-
Rodney Badcock
(Robinson Research Institute)
- Author in Optimising rotor speed and design for an externally-mounted HTS dynamo
- Author in Temperature dependent behaviour of a barrel-type HTS dynamo
- Co-author in Frequency ramping effects on a dynamo-type HTS flux pump
- Co-author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Co-author in Impact of stator ring width on output of a dynamo-type HTS flux pump
- Co-author in Magnetization loss in REBCO Roebel cables with varying strand numbers
- arnaud badel (CNRS)
- Karie Badgley (Fermilab)
- Jaenam Bae (Dongyang Mirae University)
- Anton Bagdinov (P.N. Lebedev Physical Institute of the Russian Academy of Sciences)
-
Tommaso Bagni
(University of Twente)
- Author in Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling
- Author in Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models
- Author in Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors
- Author in Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Nadezda Bagrets (Karlsruhe Institute of Technology – KIT)
- Nadja Bagrets (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Zhiming Bai (College of Sciences, Northeastern University, Shenyang )
- Lifeng Bai (Northwest Institute for Nonferrous Metal Research)
- Andrei Baikalov (ITER)
- Alexander Bainbridge (STFC)
-
Hugo Bajas
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Author in Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Marta Bajko
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Author in Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Stavroula Balampekou
(National Technical Univ. of Athens (GR))
- Co-author in Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN
- Co-author in Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit
- Steven Ball (Oxford Instruments Nanoscience)
-
Amalia Ballarino
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Development of superconductors for future large scale applications
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Adrian Bampton (Siemens Healthineers)
- Tae-Kyoung Bang (Republic of Korea /Chung nam nat'l University)
- Nobuya Banno (National Institute for Materials Science)
-
Pietro Barabaschi
(Fusion for Energy)
- Co-author in [Invited] JT-60SA Magnet System Status
- Grigory Baranov (Budker Institute of Nuclear Physics)
- P. Barbero (SIMIC)
- ESTHER BARBERO (FUSION FOR ENERGY)
- E. Barbero Soto (Fusion for Energy)
- Romain Barbier (LNCMI-EMFL-CNRS)
- Miguel Jose Barcala Riveira (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Aaron Barnes (Victoria University of Wellington)
- Mike Barnes (University of Manchester)
-
emanuela barzi
(Fermilab)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Juan Bascuñán
(MIT Francis Bitter Magnet Laboratory)
- Author in A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
- Author in A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
- Co-author in A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Co-author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Co-author in HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
- R. Basilio
- Alexandre Bataille (CEA Saclay)
- Rod Bateman
- Bryan Bationo (Forschungszentrum Jülich GmbH)
- RITA BATISTA (FUSION FOR ENERGY)
- R. Batista (Fusion for Energy)
- Alexander Batrakov (Unknown)
-
Roberto Battiston
(INFN-TIFPA. Università di Trento and ASI)
- Co-author in The limits of space radiation magnetic shielding
- Markus Bauer (THEVA Dünnschichttechnik GmbH)
- Z. Bautista (Andong National University)
- Pascal Bayrasy (Fraunhofer Institute)
- Jerome BEARD (CNRS)
- Eric Beaugnon (Université Grenoble Alpes - LNCMI)
- Ulf Bechstedt (Forschungszentrum Jülich GmbH)
- Mateusz Jakub Bednarek (CERN)
- Isabel Bejar Alonso (CERN)
- boris bellesia (fusion for energy)
- B. Bellesia (Fusion for Energy)
- Fabrizio Bellina (Udine University)
- giovanni bellomo
- Jean BELORGEY (CEA France)
- Alexander Belov (JSC"NIIEFA")
- Valery Belyakov (JSC "NIIEFA")
- Valery Belyakov (Efremov Institute)
- Tong Ben (Hebei University of Technology)
- Chamseddine Benabderrahmane (European Synchrotron Radiation Facility)
- Michael Benedikt (CERN)
- Tara Benkel (CNRS)
- Ben Tong Ben Tong (Hebei University of Technology)
-
Anne Bergen
(Universiteit Twente)
- Co-author in Self-heating effect in HTS coils
- Anne Bergen
- Johannes Bernhard (CERN)
- Christophe Paul Berriaud (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
-
Christophe Paul Berriaud
(DAPNIA)
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in Quench propagation measurements on 2 km MgB2 coil up to 4 T.
- Co-author in A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes
- Co-author in Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Edgar Berrospe (Universidad Nacional Autonoma de Mexico)
- Andrea Bersani (INFN)
- Peluso Bertrand (CEA)
- Denis Bessette (ITER Organization)
- Patrick Bestmann (CERN)
- Grzegorz Bezuik (Wroclaw University of Technology)
-
Mustapha BGHOUR
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
-
Kabindra Bhattarai
(Applied Superconductivity Center-NHMFL)
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Fangfang Bian (School of Electrical and Information Engineering, Jiangsu University)
- Marco Bianchi (Bologna University)
-
Erwin Roland Bielert
(Univ. Illinois at Urbana-Champaign (US))
- Author in A novel method for greatly reduced edge effects design in CCT magnets
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN
- Co-author in Superconducting Detector Magnets for CERN’s Future Circular Collider
-
Bernard Bigot
(ITER International Organization)
- Author in Overall Status of the ITER Project
- Mikel Bilbao Gutierrez (Fusion for Energy)
-
Julien Billette
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
- Gerard Billotte (General Electric)
-
Mark Bird
(FSU)
- Author in [Invited] Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL
- Author in Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet
- Author in Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Florian Birnkammer (Universitaet der Bundeswehr Muenchen)
- Fréderic Blache (Synchrotron SOLEIL)
- Alexander Bleile (GSI)
- Paul Blom (VDL Enabling Technologies Group)
- Alain Blondel (Universite de Geneve (CH))
- Greg Boebinger (National High Magnetic Field Laboratory / Florida State University)
- Michael Boersch (WEKA AG)
-
Cristian Boffo
(Babcock Noell GmbH)
- Author in Design, Manufacture and Testing of a Pair of Superconducting Solenoids for the Upgrade of the Neutron Spin-Echo Spectrometer J-NSE at the Research Reactor FRM II (Munich)
- Author in Magnetic field measurements of full scale conduction cooled superconducting undulator coils
- Author in Status of Design and Manufacturing of PENELOPE neutron trap
- Author in Superconducting Undulators Toward Commercial Products
- Co-author in Full Scale Conduction Cooled Superconducting Undulator Coils – Training, Stability and Thermal Behavior
-
Igor Bogdanov
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Marek Bohdanowicz (CERN)
- Jürgen Böker (Forschungszentrum Jülich GmbH)
- Scott Bole (NHMFL)
- Scott Bole (NHMFL)
- Marco Bolla (SIMIC S.p.A)
- Roberto Bonifetto (Politecnico di Torino)
- alessandro bonito oliva (F4E)
- François BONNE (CEA)
- Vincent Bontemps (ITER IO)
-
Bernardo Bordini
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Franck BORGNOLUTTI (CEA)
- Vladimir Borisov (JINR)
- Lorenzo Bortot (CERN)
-
Ernesto Bosque
(National High Magnetic Field Laboratory)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Ernesto Bosque (National High Magnetic Field Laboratory)
- Rodger Clayton Bossert (CERN)
- EVA BOTER (FUSION FOR ENERGY)
- E. Boter Rebollo (Fusion for Energy)
-
Luca Bottura
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in High Field Accelerator Magnets: a Path to New Physics
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Abdellah BOUAADDI
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
-
Nicolas Bourcey
(CERN)
- Author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Alex Bourquard (General Electric)
- Denis Bouziat (CEA Saclay)
- Christelle Boyer (ITER)
- Albano Bragagni (Tratos cavi)
- Alexey Bragin (Budker Institute of Nuclear Physics)
- Alexey Bragin (Budker Institute of Nuclear Physics)
-
Enrico Braidotti
(CAEN ELS s.r.l.)
- Co-author in A novel digital magnet power supply approach
-
Philippe Bredy
(CEA Saclay)
- Author in Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Co-author in Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Patrick Breining (ETI-HEV, KIT)
- Jeff Breitschopf (Texas A&M University)
- Johan Bremer (CERN)
-
Marco Breschi
(Bologna University)
- Author in Analysis of losses in superconducting magnets based on the Nb3Sn Rutherford cable configuration for future gantries
- Author in Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs
- Author in Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil
- Author in Modeling of AC losses in the CS and TF conductors for the ITER Project
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Co-author in Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016
- William Brey (NHMFL-FSU)
- Alberto Brighenti (NEMO Group, Dipartimento Energia, Politecnico di Torino, Torino, Italy)
-
Paul BRINDZA
(Jefferson Lab)
- Author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- Author in Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
-
Francesco Broggi
(INFN - LASA Lab.)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in A fast 10 kA current switch for High Temperature Superconductor accelerator magnets
- Co-author in Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
- Alan Bross (Fermilab)
- Lucas Brouwer (Lawrence Berkeley National Laboratory)
-
Lucas Brower
(LBNL)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Improved Modeling of Canted-Cosine-Theta Magnets
- Author in LEDET-ANSYS coupled modeling of transients in superconducting magnets
- Author in Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program
- Co-author in Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Michael Brown
(Florida State University)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Joe Brown
- Thomas Brown (Princeton Plasma Physics Laboratory, Princeton University)
- Christelle Bruni (LAL)
-
Pierluigi Bruzzone
(EPFL-CRPP)
- Author in A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field
- Author in Measurements of the Effective Thermal Conductivity of the ITER TF Coil Case Cooling System
- Author in Study of the Hotspot Temperature during Quench in the Non-Planar Coils of W7-X
- Co-author in Conductor Performance of Nb3Sn Sample for CFETR CSMC coil
- Co-author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Co-author in Inter-layer Joint for the TF Coils of DEMO - Design and R&D
- Co-author in Performance of the ITER CS joints
- Co-author in Progresses in cable in conduit for fusion magnets: from ITER to DEMO
- Co-author in Stacked tape HTS conductors for Fusion Magnets
-
Chris Bumby
(Victoria University of Wellington)
- Author in Optimising rotor speed and design for an externally-mounted HTS dynamo
- Author in Temperature dependent behaviour of a barrel-type HTS dynamo
- Co-author in Frequency ramping effects on a dynamo-type HTS flux pump
- Co-author in Impact of stator ring width on output of a dynamo-type HTS flux pump
- Co-author in Magnetization loss in REBCO Roebel cables with varying strand numbers
- Raphaela Burzler (THEVA Dünnschichttechnik GmbH)
- Marco Buzio (CERN)
- Alexander Bychkov (Joint Institute for Nuclear Research)
- Nikolay Bykovsky (EPFL - SPC)
- Guo C.
- J. Caballero (Fusion for Energy)
- Guozhu Cai (colleague)
-
Barbara Caiffi
(INFN Sezione di Genova)
- Author in Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
- Co-author in Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Daniel Calcoen (CERN)
- Jesús Calero (CIEMAT)
-
Valerio Calvelli
(U)
- Co-author in The limits of space radiation magnetic shielding
- Simon Calvert (Siemens Healthcare)
- Ciro Calzolaio (Paul Scherrer Institut)
- Josep Campmany (Cells)
- Mattieu Canale (CERN)
- Kurt Cantrell (NHMFL)
-
Quanliang Cao
- Author in Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test
- Co-author in Design, fabrication, and test of a dual-coil system for electromagnetic sheet forming
- Co-author in Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field
- Quanliang Cao
- Quanliang Cao
- Quanliang Cao (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Lei Cao (China Institute of Atomic Energy)
- Quanliang Cao (Wuhan National High Magnetic Field Center, State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology)
-
Alessio Capelluto
(ASG Superconductors SpA)
- Co-author in ENLARGED BORE 11.74T MAGNET FOR BRAIN RESEARCH APPLICATION
- Co-author in MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations
- Co-author in OPTIMIZATION, DESIGN AND OPERATION ASSESSMENT OF A MULTIPURPOSE DETECTOR FOR NICA COLLIDER
- Ruben Horacio Carcagno
- David Cardwell (University of Cambridge)
- JUSTIN CARLMICHAEL (FERMILAB)
- Alejandro Carlon Zurita (CERN)
- David Carrillo (CERN)
- Sara Casalbuoni (IBPT-KIT)
- M. Casas Lino (Fusion for Energy)
- MARIA PAZ CASAS LINO (FUSION FOR ENERGY)
-
Shlomo Caspi
(Lawrence Berkeley national laboratory USA)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program
- Co-author in Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Francesca Cau (Fusion for Energy)
-
Eugenio Cavanna
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- J. Cazabonne
- Roberto Cereseto (INFN Sezione di Genova)
- Sang Heon Chae (Jeju National University)
- Timothy Chae (US ITER Project)
- Iryna Chaikovska (LAL)
- Vadim Chamritski (HTS-110)
- Wan Kan Chan
- Cheng-Hsing Chang (NSRRC)
- Cheng-Hsiang Chang (NSRRC)
- Deng Changzheng
- Steve Chappell
- Zinour Charifoulline (CERN)
- François Chastel
- K.T. Chau (The University of Hong Kong)
- Xavier Chaud (CNRS / LNCMI)
- joel Chavanne (ESRF)
- Daniel Chavez (Universidad Guanajuato)
- Chuan Chen (Western Superconducting Technologies Co.)
- Xuheng CHEN (CHMFL)
- Hsin-Hui Chen
- S.D. Chen (National Synchrotron Radiation Research Center)
- Shunzhong Chen (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Junhua Chen (Huazhong University of Science & Technology)
- Wei Chen (Huazhong University of Science and Technology)
- I.G. chen (Department of Material Science and Engineering, National Cheng Kung University)
- Yunyun Chen
-
Hao Chen
(China University of Mining & Technology)
- Author in 3D Electromagnetic Analysis of Tubular Permanent Magnet Linear Launcher
- Author in A transverse flux single-phase tubular switched reluctance linear motor
- Author in Analysis of Magnetic Polarity Distribution for a Dual-rotor Switched Reluctance Machine
- Author in Analytical Polynomial Models of Nonlinear Magnetic Flux Linkage for Switched Reluctance Motor
- Author in Electromagnetic Analysis on Dual-Stator Switched Reluctance Motor
- Author in Flux Characteristics Analysis of a Single-phase Tubular Switched Reluctance Linear Motor
- Author in Flux Characteristics Analysis of Single-phase Tubular Permanent Magnet Linear Motor
- Author in Novel U-shaped Structure Switched Reluctance Machine With a Module Outer Rotor
- Lifei Chen (Hebei University of Technology)
- Junquan Chen (Naval University of Engineering )
- Long Chen (HEBUT)
- panpan Chen (China electric power research institute)
- Meng Chen (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Qi Chen
- Yuquan Chen
- Meng Chen
- Xun Chen (Jiangsu University of Science and Technology)
- Qi Chen
- Peng Chen (NHMFL/FSU)
- Wei Chen (HUST)
- Qian Chen (Jiangsu University)
- Fusan Chen
- Jenny Chen (NSRRC)
- Liyang Chen (School of Electrical and Information Engineering, Jiangsu University)
- Long Chen (Hebei University of Technology)
- Qushan Chen (Huazhong University of Science and Technology)
- Lei Chen (Wuhan University)
- Hongkun Chen
- Wei Chen (Huazhong University of Science and Technology)
- XI Chen (GEIRINA, Santa Clara, California, U.S.A)
- Lei Chen (China University of Mining and Technology)
- Zhuomin Chen
- Zhiyou Chen
- HUNG-CHIAO CHEN (NSRRC)
- Wenge Chen
- Yuan Chen
- Yung-Sen Cheng (NSRRC)
- Daniel Cheng (LBNL)
- CH Cheng
-
Daniel Cheng
- Author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Da Cheng (IHEP,CAS)
- Junsheng Cheng (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Li Chengshan (Northwest Institute for Nonferrous Metal Research)
- Wang Chengtao
-
Jiang Chengxi
(Huazhong University of Science and Technology)
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Gung Chen-yu (ITER Organization)
-
Kyekun Cheon
(SuNAM)
- Author in Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Vsevolod Chepikov (SuperOx)
- Pavel Chevtsov (Paul Scherrer Institute)
- C.A. Chiang ( Science and Technology of Synchrotron Light source in Department of Physics, National Tsing Hua University)
- Sandro Chiarelli (ENEA)
- Yuan-Chen Chien (NSRRC)
- Luisa Chiesa (Tufts University)
- Hirotaka Chikaraishi (National Institute for Fusion Science)
- Hirotaka Chikaraishi (National Institute of Fusion Science)
- Hirotaka Chikaraishi (National Institute of Fusion Science)
- T.W. Ching (University of Macau)
- T.W. Ching (University of Macau)
-
Antonella Chiuchiolo
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
-
Guram Chlachidze
(Fermilab)
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Eun Jung Cho (GSI Darmstadt)
- Sangho Cho (TECHSTEEL Co., Ltd.)
- Sangho Cho (Supercoil Co., Ltd.)
-
Han-Wook Cho
- Co-author in Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine
- Co-author in Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines
- Co-author in Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole
- Co-author in Core Loss Calculation of Permanent Magnet Machines Using Analytical Method
- Han-Wook Cho (Chungnam National University)
- Sooyoung Cho (Hanyang University)
-
HyeWon CHOI
(CHOSUN University)
- Author in Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
- Author in Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system
- Author in Characteristics of SWPT according to the number of transmitting and receiver coils.
- Author in Operating characteristics of Arc-induction type DC circuit breaker
-
Yeon Suk Choi
(Korea Basic Science Institute)
- Author in Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure
- Author in Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Co-author in Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
- Yojong Choi (Electrical and Electronic Engineering, Yonsei University, Seoul, Korea)
-
HyoSang CHOI
(CHOSUN University)
- Co-author in Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
- Co-author in Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils
- Co-author in Characteristic analysis of SFCL DC interrupting system in Windfarm
- Co-author in Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system
- Co-author in Characteristics of SWPT according to the number of transmitting and receiver coils.
- Co-author in Operating characteristics of Arc-induction type DC circuit breaker
- Seyong Choi (Kangwon National University)
- Jang-Young Choi
-
Jang-Young Choi
- Author in Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM.
- Author in Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator
- Author in Design of hybrid thrust magnetic bearing for heavy rotating shaft considering self-weight compensation according to axial load
- Co-author in Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine
- Co-author in Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines
- Co-author in Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole
- Co-author in Core Loss Calculation of Permanent Magnet Machines Using Analytical Method
- Jang-Young Choi
- Sukjin Choi (IBS)
-
Yoonhyuck Choi
(Korea university)
- Author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Co-author in A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers
- Co-author in Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Co-author in Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
-
Jang_young Choi
(Chungnam National University)
- Author in Analysis of Torque Characteristics according to Gear ratio of Coaxial Magnetic Gear
- Author in Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array
- Author in Integrated Motor Propulsor Magnet Design with Hybrid Halbach Array for Torque Ripple Reduction
- Author in Measurement and Torque Calculation of Magnetic Spur Gear Based on Quasi 3-D Analytical Method
- Jongho Choi (Supercoil Co., Ltd.)
- Kyeongdal Choi (Korea Polytechnic University)
- Simon Chorley (Siemens Healthineers)
- Maciej Chorowski (Wroclaw University of Technology)
- Yun-Liang Chu (National Synchrotron Radiation Research Center)
- Ting-Yi Chung (NSRRC)
- Dong-Chul Chung
- Dong-Chul Chung
- Dong-Chul Chung
- Dong-Chul Chung
-
Daniel Ciazynski
(CEA-IRFM)
- Author in ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Co-author in Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Co-author in Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- G.A.P. Cirrone (INFN-LNS)
- P. Cirrone (INFN-LNS)
- Marian Ciszek (Wroclaw University of Technology)
- James Citadini (Brazilian Synchrotron Light Laboratory)
- Neil Clarke
- Jim Clarke (STFC)
- Nicholas Clayton
- Valter Cocilovo (ENEA FSN)
- Gert-Jan Coelingh (CERN)
- Matti Coleman (UKAEA / EUROfusion)
- Matti Coleman (EUROfusion)
-
Ted Collings
(MSE, The Ohio State University)
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
- Author in Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla
- Co-author in FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Co-author in Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Co-author in YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T
- Norbert Collomb (STFC Daresbury Laboratory)
- Zhu Congming (State Grid Electric Power Research Institute )
-
William Coniglio
(NHMFL-FSU)
- Co-author in 32T Protection Design and Operation
- Guido Consogno (WEKA AG)
- Lance Cooley (Fermilab)
- Tim Coombs (University of Cambridge)
-
Valentina Corato
(ENEA)
- Author in Design of the internal embedded joints for the EU DEMO TF coils
- Author in Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Carl Cormany (ITER Organization)
- MARC CORNELIS (FUSION FOR ENERGY)
- M. Cornelis (Fusion for Energy)
- J. Cornella (Fusion for Energy)
- Idoia Cortes Garcia (Technische Universität Darmstadt)
- olivier cosson (SIGMAPHI)
- Marie-Emmanuelle Couprie (Synchrotron SOLEIL)
- John Cozzolino (Unknown)
- Bruno Crepel (General Electric)
-
Tim Cross
(NHMNFL)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Antonio Cucchiaro (ENEA FSN)
-
Antonio Cucchiaro
(ENEA)
- Co-author in [Invited] JT-60SA Magnet System Status
- Chunyan Cui (1Institute of Electrical Engineering, Chinese Academy of Sciences)
- YingMin Cui (North China Electric Power University)
- Tao Cui (China Institute of Atomic Energy)
- Jian Cui (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)
- Tao Cui (China Institute of Atomic Energy)
- Stefano Cuneo (ASG Superconductors SpA)
- Benoit Cure (CERN)
- Sebi Curreli (Universita e INFN Genova (IT))
- G. Cuttone (INFN-LNS)
- Giacomo Cuttone (INFN-LNS)
- Oliver Cwikowski (National Grid)
- Hu D.
- Cheng Da
- Antoine Dael
- Knud Dahlerup-Petersen (CERN)
- Yinming Dai (1Institute of Electrical Engineering, Chinese Academy of Sciences)
- Rui Dai (Shenyang University of Technology)
- Qi Dai (R&D Center of Applied Superconductivity; State Key Lab. of AEET)
- Chao Dai (Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP))
- Zhiheng Dai
- Masanori Daibo (Fujikura Ltd.)
- Akihiro Daikoku (Mitsubishi Electric Corporation)
- Michael Daly (CERN)
- Gabriele D'Amico (Fusion For Energy)
- M. Damone (Fusion for Energy)
- MICHELE DAMONE (FUSION FOR ENERGY)
- Giorgio D'Angelo (CERN)
- Hu Daoyu (Shanghai Jiao Tong University)
- Cécile Daversin (IRMA Strasbourg)
- Timothy Davies (University of Oxford)
- Daniel Davis (FSU/NHMFL)
- Sam Davis (F4E)
- Philippe De Antoni (CEA Saclay)
- F. Debray
-
Patrick Decool
(CEA)
- Author in Completion of the French JT-60SA Toroïdal Field Magnet Contribution
- Co-author in [Invited] JT-60SA Magnet System Status
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Co-author in Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility
- Pavel Degtyarenko (Joint Institute for High Temperatures, Russian Academy of Science)
- Rogue Dejus (Argonne National Laboratory)
- Ronald Dekker (DeMaCo Holland bv)
- Morgan Delbecq (sigmaphi)
-
morgan DELBECQ
(sigmaphi)
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
- Co-author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
-
Antonio della Corte
(ENEA)
- Author in A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils
- Author in Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors
- Author in Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors
- Co-author in Design of the internal embedded joints for the EU DEMO TF coils
- Co-author in Progresses in cable in conduit for fusion magnets: from ITER to DEMO
- Antonio DellaCorte (ICAS S.c.r.l)
-
Massimo De Marco
(ELI-Beams)
- Co-author in Design of a laser-driven kiloTesla magnetic bottle
-
Jean-Louis Demarinis
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Ernesto De Matteis (CERN)
-
Evgeny Demikhov
(P.N. Lebedev Physical Institute of the Russian Academy of Sciences)
- Author in MRI scanner development in Russia
- Co-author in Performance test of 1.5 T cryogen free orthopedic MRI magnet
-
Timophey Demikhov
(Lebedev Physics Institute)
- Author in MRI scanner development in Russia
-
Changdong Deng
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Zigang Deng
- Zigang Deng (Southwest Jiaotong University)
- Changzheng Deng
- Changzheng Deng
- Fangxiong Deng (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Le Deng
- Fangxiong Deng
- Anthony Dennis (University of Cambridge)
- Reiner Denz (CERN)
-
Gijs De Rijk
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology
- Kalliopi Dermati (GSI)
- Laurent Deront (CERN)
- Justin Deterding (NHMFL)
- Arnaud Devred (ITER IO)
-
Arnaud Devred
- Author in Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Modeling of AC losses in the CS and TF conductors for the ITER Project
- Author in Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models
- Author in Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors
- Author in Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario
- Co-author in Manufacturing and Qualification Test of ITER Busbar Joint
- Co-author in Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016
- A. Devred (ITER)
- Arnaud Devred
- A. Devred (ITER IO )
- Arnaud Devred
-
Marc Dhallé
(University of Twente)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Author in Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Author in Quench protection of an MgB2-based MDS magnet system
- Author in Self-heating effect in HTS coils
- Co-author in [Invited] HTS field coils with robust design for a superconducting wind turbine generator
- Co-author in A Superconducting Magnetic Density Separation Laboratory Demonstrator
- Co-author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Xiaoyan Diao (Jiangsu University)
- M. A. Diaz (Andong National University)
-
Daniel Dietderich
(Lawrence Berkeley National Laboratory)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Peter Dietz (Siemens Healthineers)
- Dorus Dijkstra (University of Twente)
- Pietro Alessandro Di Maio (2Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici (DEIM), Università di Palermo)
-
Joseph DiMarco
(Fermi National Accelerator Laboratory)
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
-
Hongfa Ding
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in A Novel Design of Repetitive Transcranial Magnetic Stimulator with Monophasic and Biphasic Waveform
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
- Co-author in Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet
- Kaizhong Ding (Institute of Plasma Physics, CAS)
-
tonghai ding
(Huazhong university of science and technology)
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet
-
Hongfa Ding
(Huazhong University of Science and Technology)
- Author in A new three-level repetitive pulse magnetic field power supply system
- Author in Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System
- Author in Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet
- Yi Ding (SINAP CAS)
- hongfa ding
- Francesco Dioguardi (DH Industries BV)
- E. Di Pasquale
- Enrico Di Pietro (F4E)
-
Gaël Disset
(CEA Saclay)
- Co-author in [Invited] JT-60SA Magnet System Status
- Iain Dixon (NHMFL)
-
Iain DIxon
(NHMFL-FSU)
- Author in [Invited] Commissioning of the 36 T Series-Connected Hybrid Magnet at the NHMFL
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Design, manufacture and test of 20 kA binary current leads for the HFML 45 T hybrid magnet
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Aldo Di Zenobio (ENEA)
- Aldo Dizenobio (ICAS S.c.r.l)
- Xi D.M.
- Toshiya Doi (Kyoto Univ., JST-ALCA)
- Nello Dolgetta (ITER Organization)
-
Dave Doll
(Hyper Tech Research)
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
- Co-author in FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Co-author in Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Manuel Dominguez
- Manuel Angel Dominguez Martinez (Ciemat)
- Kun dong (southeast university)
- Aric Donnelly (Argonne National Laboratory)
- Alexei Donyagin (Joint Institute for Nuclear Research)
- Chuck Doose (Argonne National Laboratory)
- Martin Doppelbauer (ETI-HEV,KIT)
- O. Dormicchi (ASG)
- Norihiro Doshita (Yamagata University (JP))
- Giovanni Drago (Unknown)
- Guido Drexlin (Institute for Nuclear Physics (IKP), Karlsruhe Institute of Technology (KIT))
- Ho Ik Du (Chonbuk National University)
- Wei Du (Jinagsu university)
-
Yi Du
(Jiangsu University)
- Author in A New Magnetic Field Modulation Type of Brushless Double-Fed Machine
- Author in A New Partitioned Stator Hybrid Excitation Flux Switching Motor with Ferrite Permanent Magnet
- Author in Design and analysis of a less-rare-earth PM-assisted synchronous reluctance machine considering tradeoffs of PM flux linkage and magnetic saliency
- Author in Design and analysis of an interior permanent magnet synchronous machine with multi flux barriers based on electromagnetic-mechanical coupling method
- Xinyuan Du
- Haisen Du (Lanzhou University)
- Qingqing Du (ASIPP)
- Yi Du (Jiangsu University)
- Yujie Duan
- Delio Duarte Ramos (CERN)
- Olivier DUBOIS (CEA France)
- Jean-Luc Duchateau (CEA)
- Jean-Eric Ducret (UMR 5107 CNRS CEA Université Bordeaux)
-
Alexey Dudarev
(CERN)
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in Magnet System for the BabyMIND Neutrino Detector at J-PARC
- Author in New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications
- Author in Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN
- Co-author in A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator
- Co-author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Co-author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Co-author in FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system
- Co-author in Superconducting Detector Magnets for CERN’s Future Circular Collider
-
Alan Dudas
(Muons, Inc.)
- Co-author in Construction and Testing of Curved ReBCO Coils
- Jean Dumas (LNCMI)
-
Jean Dumas
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Olaf Dunkel (CERN)
-
Maria Durante
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Tests in Standalone Mode of the EuCARD 5.4-T REBCO Dipole Magnet.
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Design of a Nb3Sn 16 T block dipole for the Future Circular Collider
- Co-author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- John Durrell (University of Cambridge)
- Patrick Ebermann (Vienna University of Technology (AT))
- Andrei Egorov (National Research Nuclear University MEPhI (NRNU MEPHI))
- Ryo Eguchi (Mitsubishi Electric Corporation)
- Christian Ehrlich (Forschungszentrum Jülich GmbH)
- Luciano Elementi (Fermilab)
-
HABIBA EL HAMIDI
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
- Mariam Elshiekh (University of Bath)
- Mariam Elshiekh (University of Bath)
- Anna Encheva (ITER Organization)
-
Arno Engels
(Radboud University Nijmegen - High Field Magnet Laboratory)
- Co-author in A novel clamping method for resistive magnets
- Ilhan Engin (Forschungszentrum Jülich GmbH)
- Charles Lamar English (NHMFL)
-
Shun Enomoto
(KEK)
- Author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Beomyong Eom (Korea Electrotechnology Research Institute )
- Pascal Erni (WEKA AG)
- Kong Ershuai
- Liu Erwei
- Antonio Estévez (Ciemat)
- David Evans (Advanced Cryogenic Materials Ltd)
- Daniel Evbota (Fermilab)
-
David Everitt
(ORNL)
- Co-author in Performance of the ITER CS joints
- David Everitt (US ITER Project)
- Gaston Exil (CEA Sacay)
-
Yehia Eyssa
(Y. E. Consulting Service, Alexandria, Egypt)
- Co-author in Ultimate Forces of the Grenoble Hybrid Magnet
-
Pasquale Fabbricatore
(Universita e INFN Genova (IT))
- Author in Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
- Author in Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid
- Co-author in Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Laura Garcia Fajardo
(Lawrence Berkeley National Laboratory)
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Giovanni Falcitelli (EnginSoft S.p.A)
- Kuanjun Fan (Huazhong University of Science and Technology)
- Linlin Fang
- Shuhua Fang
- Jin Fang (School of Electrical Engineering, Beijing Jiaotong University)
- Xiaoyu Fang (HUST)
-
Xiao Fang
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in A Novel Design of Repetitive Transcranial Magnetic Stimulator with Monophasic and Biphasic Waveform
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
-
Stefania Farinon
(Universita e INFN Genova (IT))
- Author in Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
- Co-author in Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Mathieu Favre (CERN)
- philippe fazilleau (cea)
- Sandor Feher (Fermi National Accelerator Lab. (US))
-
Helene Felice
(CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
- Author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Design of a Nb3Sn 16 T block dipole for the Future Circular Collider
- Co-author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- A. Felipe (Iberdrola)
- Ningjun Feng (Southeast University)
- Yong Feng (Western Superconducting Technologies, Co. Ltd.)
- Yong Feng (Western Superconducting Technologies Co. Ltd.)
- Wengang Feng (North China Electric Power University)
-
Zhang Fengge
(Shenyang University of Technology)
- Author in Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor
- Author in Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion
- Author in Study on Design of a Novel Magnetic Field Modulation Linear Primary Permanent Magnet Synchronous Motor
- Co-author in Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor
- Co-author in Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields
- Co-author in Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine
-
Alejandro Manuel Fernandez Navarro
(Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Author in Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
- Pilar Fernandez Pison (CERN / University Carlos III of Madrid)
-
Paolo Ferracin
(CERN)
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Parametric Study of Block-coil Dipoles Using Graded Conductors
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Jose Ferradas Troitino (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
-
Nelson Ferreira
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
- Paolo Fessia (CERN)
- Sergey Fetisov
-
Jerome Feuvrier
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Michael Field (Bruker OST)
- Walter Fietz (Karlsruhe Institute of Technology)
- Monika Finn (Federal Laboratory for Materials Research (BAM))
-
Lucio Fiscarelli
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
- Egbert Fischer
- Stefan Flassig (Babcock Noell GmbH)
- Jerome Fleiter (CERN)
- Kaether Florian (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Frederick Forest (Sigmaphi)
-
Frederick Forest
(SIGMAPHI)
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
- Co-author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- Co-author in Design and characterisation of tunable high gradient permanent magnets quadrupoles
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Ruggero Forte (2Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici (DEIM), Università di Palermo)
-
Arnaud Pascal Foussat
(CERN)
- Author in Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
- Author in Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- michael fowler (jeffersonLab)
- R. Francone (SIMIC)
- Rosa freda (ENEA)
- Paula Freijedo Menendez (CERN)
- Kevin Freudenberg (US ITER Project)
- Philippe Frichot (CERN)
- Horst Friedsam (Fermi National Laboratory)
-
Paul Frings
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
-
Lucio Frydman
(NHMFL)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- xinghe fu
- shanshan fu (China electric power research institute)
- Fangmao Fu (Huazhong University of Science & Technology)
- Yoshiki Fuchida
-
Hiroyuki Fujishiro
(Iwate University)
- Author in Numerical modelling of iron-pnictide bulk superconductor magnetization
- Author in Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
- Co-author in Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
- Shinji Fujita (Fujikra Ltd.)
-
Eikou Fujiwara
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Sho Fujiyama (Sophia University)
- Susumu Fukada (Okayama UNiversity)
- Satoshi Fukui (Niigata University)
- Satoshi Fukui (Niigata University)
- Yusuke Fukumoto (Railway Technical Research Institute)
- Hidenao Fukuyama (Kyoto University)
- Takahiro Fukuzaki (Kyushu University)
- Mitsuho Furuse (National Institute of Advanced Industrial Science and Technology)
- Yasuhiro Fuwa (Kyoto University)
- Andrea Gaddi (CERN)
- Dominic Gaisbauer (TU München)
- Santhosh Kumar Gandla (Sumitomo (SHI) Cryogenics of America Inc)
- Huixian Gao (Western Superconducting Technologies Co. Ltd.)
- Yuanwen Gao (Lanzhou University)
-
Peng Gao
(University of Twente)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Yuting Gao (School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
- Yuting Gao (Huazhong University of Science and Technology)
- Jiani Gao (Paul Scherrer Institut (PSI))
- Hector Garcia Gavela (Universidad de Oviedo (ES))
- Jesus Angel Garcia Matos
- Luis Garcia-Tabares (CIEMAT)
- Bernard Gastineau (CEA Sacaly)
- Fabrice Gautheron (Univ. Illinois at Urbana-Champaign (US))
- Remy Gauthier (CERN)
- Florent GAUTHIER (ITER)
-
Andrey Gavrilin
(Florida State University, Florida, USA)
- Author in Energy and material efficient non-circular bore Bitter magnets
- Author in The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests
- Co-author in Construction and test of the NHMFL 32 T superconducting magnet
- Co-author in Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet
- Sergey Gavrilkin (Lebedev Physics Institute)
-
J.D.D. Gawith
- Co-author in Ultra-high field HTS flux-pumped magnets
- Enrique Gaxiola (ITER Organization)
- Meng Ge (Huazhong University of Science & Technology)
- Tao Ge (China Institute of Atomic Energy)
- Zhengfu Ge (Xi'an Superconducting Magnet Technology Co.,Ltd)
- Tao Ge (China Institute of Atomic Energy)
- Thibault Genestier
- Jianzhao Geng (University of Cambridge)
-
Laurent Genini
(CEA/IRFU)
- Author in Design, Testing and Commissioning of 25.7 kA HTS Current Leads
- Co-author in ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in Progress of the JT-60 SA Toroidal Field coils tests in the Cold Test Facility
- Luca Gentini (CERN)
- Thomas Gerhard (Babcock Noell GmbH)
- James Gerity (Texas A&M University)
- Dieter Gerling (Universitaet der Bundeswehr Muenchen)
- Hubert Gerwig (CERN)
- Amin Ghaith (Synchrotron SOLEIL)
- Hossein Ghasem (IPM - Institute for Research in Fundamental Sciences (IR))
- Jean-Marc Gheller (CEA Saclay)
- William Ghiorso (Lawrence Berkeley National Laboratory)
- Arup Ghosh (Brookhaven National Laboratory)
- Lorenzo Giannini (ENEA)
- Woosik Gil (Karlsruhe Institute of Technology (KIT))
- Graham Gilgrass
-
Graham Gilgrass
- Author in In Memory of David Hawksworth
-
James Gillman
(NHMFL)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Massimo Giovannozzi (CERN)
-
Martina Giraudo
(Thales Alenia Space Italia)
- Co-author in The limits of space radiation magnetic shielding
-
Lorenzo Giuffrida
(ELI-Beams)
- Co-author in Design of a laser-driven kiloTesla magnetic bottle
- Nicole Glamann (KIT)
-
Byeong-Soo Go
(Changwon National University)
- Author in A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Author in Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
- Author in Design and structural analysis of induction type coilgun system
- Author in Design and thermal analysis of an HTS module coil for a 12 MW wind power generator
- Author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Co-author in Investigation of Design Considerations for an Electromagnetic Induction Coilgun System
- Robert Goddard
- Robert Goddard (NHMFL-FSU)
-
Wilfried Goldacker
(Karlsruhe Institute of Technology / ITEP)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Oleg Golubitsky (Joint Institute for Nuclear Research)
- Jose Gomez (The Vacuum Projects)
- Pablo Ramón Gómez (CIEMAT)
- Fatima Gomez De La Cruz (CERN)
- Fedor Gömöry (Slovak Academy of Sciences)
- Pengfei Gong (China Institute of Atomic Energy)
- Tian-Yong Gong
- Tianyong Gong (Southwest Jiaotong University)
- Kang Gong
- Thodoris Gortsas (University of Patras)
- Takuya Goto (National Institute for Fusion Science)
-
Stephen Gourlay
(LBNL)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Real-time functional diagnostics of superconducting magnets using acoustic techniques
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Thomas Gradt (Federal Laboratory for Materials Research (BAM))
- Patrick Graffin
- Ludovic Grand-Clement (CERN)
-
Cedric Grandclement
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Giovanni Grasso (Columbus Superconductors SpA)
- Andreas Grau (IBPT-KIT)
- Michael Green (LBNL & FRIB/MSU)
- Tina Griesemer
- Van Griffin (Applied Superconductivity Center-NHMFL)
- Adrian Griffin (Oxford NMR)
- Francesco Grilli (Karlsruhe Institute of Technology)
- Simone Grillo (ASG Superconductors s.p.a.)
- Gilles Gros (CEA)
-
Philippe Grosclaude
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Veit Große (THEVA Dünnschichttechnik GmbH)
-
Chris Grovenor
(Department of Materials, University of Oxford)
- Co-author in Lead-free persistent mode joints between NbTi wires
- James Grudzinski (Argonne National Laboratory (ANL))
- F. Gu
- hao gu (Jiangsu University)
-
Mingzhi Guan
(Institute of Modern Physics, Chinese Academy of Sciences )
- Author in Development of SECRAL II superconducting magnet
- Author in Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench
- Author in Eddy currents analysis of dipole magnets of booster ring at HIAF project
- Author in Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements
- Mingzhi Guan (Institute of Modern Physics, Chinese Academy of Sciences )
- Leilei Guan (China Institute of Atomic Energy)
- Dave Gubbins (Siemens Magnet Technology)
- Quentin GUIHARD (CEA/DRF/Irfu)
-
Michael Guinchard
(CERN)
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- S.R. Gundlach (NHMFL/FSU)
- Chen-yu Gung
- C.Y. Gung (ITER)
- jianbo Guo (China electric power research institute)
- Bing Guo (Hebei University of Technology)
-
Rong Guo
(School of Electrical Engineering, Southeast University)
- Author in Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots
- Co-author in A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion
- Co-author in Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion
- Co-author in Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear
- Co-author in Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Qiu Guohua (Shenyang University of Technology)
- Zhang GuoMin (Institute of Electrical Engineering Chinese Academy of Science)
- Song Guosheng (North China Electric Power University)
- Ramesh Gupta (BNL)
-
Mitja Gustin
- Co-author in A novel digital magnet power supply approach
- Jose Luis Gutierrez (CIEMAT)
- Hong Gye-Won (Korea polytechnic university)
- Roland Gyuráki (Karlsruhe Institute of Technology)
- Hong-Soo Ha (Korea Electrotechnology Research Institute )
-
Dong-Woo Ha
(Korea Electrotechnology Research Institute)
- Co-author in 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire
- Co-author in HTS Magnet with Smart Insulation Method
- Co-author in Repair method of locally defective or damaged coated conductor using the superconducting patch
- Co-author in Robust REBCO coated conductor with meatal stitching stabilizer
- Co-author in The effect of compositional ratio of SmBCO coated conductor on the superconducting properties.
-
Aurelio Hafalia
(Unknown)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Co-author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Per Hagen (CERN)
-
Seungyong Hahn
(Electrical and Computer Engineering, Seoul National University, Seoul, Korea)
- Author in A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
- Author in Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Seungyong Hahn (NHMFL-FSU)
-
Seungyong Hahn
(Seoul National University / National High Magnetic Field Lab.)
- Author in A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils
- Author in Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Optimal Design Methodology of Multi-Width HTS Magnet
- Author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Author in Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench
- Co-author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Co-author in Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
- Co-author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
- Ding Haifei (Jiangsu University)
-
Nandor Hajnal
(Fusion for Energy)
- Co-author in [Invited] JT-60SA Magnet System Status
- Sang-Hwan Ham (Kyungil University)
- Mamoru Hamada (Japan Superconductor Technology)
- Shinji Hamaguchi (National Institute for Fusion Science)
- takataro Hamajima (Tohoku Univ.)
-
Seunghak Han
(Yonsei University)
- Author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
-
Xiaotao Han
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test
- Author in Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
- Author in The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC
- Co-author in Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field
- Xiaotao Han
- Xiaotao Han
- Jung-Ho Han (LG Innotek)
- Xiaotao Han (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Quan Han (Institute of Plasma Physics, Chinese Academy of Sciences)
- Houxiang Han
-
TAEHEE HAN
(Jungwon University)
- Author in Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings
- Author in Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding
- Cheol Han (Chungnam National University)
- Jun Hee Han (Korea Basic Science Institute)
- Houxiang HAN
- Ke Han (NHMFL - FSU)
- Ke Han (Nationa High Magnetic Field Laboratory)
- Cheol Han
- Wonseok Han (Sungkyunkwan University)
- Cheol Han
- Qiyang Han
-
Toshiaki Hanaoka
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Pierrick Hanlet (Illinois Institute of Technology)
- Scott Hannahs (NHMFL-FSU)
- Li Hao
- QB Hao
- Hiroyuki Harada (Japan Atomic Energy Agency)
- Stefanus Harjo (JAEA)
- ROBERT HARRISON (FUSION FOR ENERGY)
- R. Harrison (Fusion for Energy)
- Joachim Hartmann (Technische Universitaet Muenchen)
- Tomoya Hase (IMR, Tohoku University)
- Yoshiji Hase (fujielectric)
- Mitsuru Hasegawa (Mitsubishi Electric)
- Shin Hasegawa (Graduate school of Tohoku University)
- Atsushi Hashimoto (Sumitomo Heavy Industries, Ltd.)
-
Hidetoshi Hashizume
(Tohoku University)
- Co-author in Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors
- Co-author in Nonlinear multiscale structural analysis of a superconducting coil and support structure for the helical fusion reactor
- Co-author in Numerical and Experimental Evaluations of the Quench Detection Performance of NbTi/YBCO Hybrid Tape
- Shoichi Hatakeyama
- Daniel Hatfield (US ITER Project)
- Timothy Haugan (U.S. Air Force Research Laboratory)
- Naum Havin (BINP)
- Kazuhiko Hayashi (Sumitomo Electric Industries, LTD.)
- Kaiwen He (Huazhong University of Science and Technology)
- Huiwen He
- Mingjie He (Huazhong Univesity of Science and Technology)
- Mathias Heiduk (Karlsruhe Institute of Technology)
- Samuli Heikkinen (Fusion For Energy)
- Reinhard Heller (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Reinhard Heller (Karlsruhe Institute of Technology)
- Eric Hellstrom (Florida)
- Eric Hellstrom (National High Field Lab, FSU)
-
Tsutomu Hemmi
(National Institutes for Quantum and Radiological Science and Technology)
- Author in Study of bending behavior in Nb3Sn strands
- Author in Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
- Co-author in Evaluation of thermal strain induced on components of Nb3Sn strand during cool down
- Co-author in New inspection method of joint resistance at room temperature for ITER TF Coil
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Co-author in Series Production of ITER TF Coil Winding Pack in Japan
- Co-author in Test of ITER-TF joint samples with NIFS test facilities
- Fritz Herlach
- Angela Hernandez
- T. Herrmannsdoerfer (Hochfeld-Magnetlabor Dresden (HLD-EMFL), Helmholtz-Zentrum Dresden-Rossendorf, D-01314 Dresden, Germany)
- Alain Herve (University of Wisconsin-Madison (US))
- Jan Henry Hetzel (Forschungszentrum Jülich)
- Lin Heyun
-
Norio Higashi
(KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
-
Kohei Higashikawa
(Kyushu University)
- Author in Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Author in In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
- Hugh Higley (Lawrence Berkeley National Laboratory)
-
Clement Hilaire
(CEA Saclay / Irfu)
- Co-author in A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes
- Co-author in Measurement campaign on critical current for MgB2 wires and tapes under a magnetic field up to 8T
- Co-author in Quench propagation measurements on 2 km MgB2 coil up to 4 T.
- Romain Hild (IRMA Strasbourg)
- D.K. Hilton (NHMFL/FSU)
-
David K. Hilton, Ph.D.
(National High Magnetic Field Laboratory (NHMFL-FSU))
- Author in Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time
- Co-author in Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Co-author in Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils
- Co-author in The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests
- Naoki Hirano (Chubu Elctric Power)
- Naoki Hirano (Chubu Electric Power Co., Inc.)
- Tadashi Hirayama (Kagoshima University)
- Tsukasa Hirayama (Japan Fine Ceramics Center)
- Yoshimitsu Hishinuma (National Institute for Fusion Science)
- Christine Hoa (CEA SBT)
-
Henry Hocker
(Brookhaven National Laboratory)
- Co-author in Construction and Testing of Curved ReBCO Coils
- Andy Hocker (Enrico Fermi Institute)
- Matthias Hoffmann (Radboud University Nijmegen-High Field Magnet Laboratory, )
- Thomas Höhn (Institute for Nuclear Physics (IKP), Karlsruhe Institute of Technology (KIT))
- Olaf Holderer (Forschungs-Neutronenquelle Heinz Meier-Leibnitz)
- Paul Holen (Stangenes Industries)
-
Eddie Frank Holik
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Markus Hollik (Karlsruhe Institute of Technology)
- mikael holm (Luvata Pori Oy)
- Tomas Holubek (IBPT-KIT)
- Genki Honda (Sumitomo Electric Industries, Ltd.)
- shotaro Honda (Kyushu University)
- Tomokazu Honda (Kyushu University)
-
Zhiyong Hong
- Author in Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers
- Author in Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Author in Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current
- Author in Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator
- Author in Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil
- Z. Hong
-
Jung-Pyo Hong
(Hangyang University)
- Co-author in HTS Magnet with Smart Insulation Method
-
Yunseok Hong
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Yong-Ju Hong (Korea Instiute of Machinery & Materials)
- Wang Hongfei (Shanghai Institute of Applied Physics,CAS)
- Zhang Hongjie
- Chishin Hori (Hitachi Ltd.)
- Koki Horino (JAEA/J-PARC)
- Md Shahriar Hossain (University Of Wollongong)
-
S Imam Hossain
(National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida, FL 32310, USA)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Hideaki Hotchi (Japan Atomic Energy Agency)
-
Zhilong Hou
(the Institute of High Energy Physics)
- Co-author in Prototype Design of the Dipole for EMuS at CSNS
- Yanbing Hou (North China Electric Power University)
- Darren Houlden (ASG Superconductors SpA)
- Wen-Hsuan Hsieh (National Synchrotron Radiation Research Center)
- CC Hsin
- Kuo-Tung Hsu (NSRRC)
- Qiang Hu (China)
- Xinning Hu (1Institute of Electrical Engineering, Chinese Academy of Sciences)
- D. Hu
- Kuo-Hwa Hu (NSRRC)
- Xinbo Hu (Applied Superconductivity Center-NHMFL)
- Yamin Hu (Jiangsu University)
- Minqiang Hu ( Nanjing Normal University)
- Yizhou Hua (Jiangsu University)
- Liu Huajun (Institute of Plasma Physics, Chinese Academy of Sciences)
-
Yongheng Huang
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
- Jianfeng Huang (University of Twente)
- Yujie Huang (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- lantao huang
- Wenmei Huang (Key Laboratory of Electro-Magnetic Field and Electrical Apparatus Reliability of Hebei Province)
- Kaiyuan Huang (University of Cambridge)
- Yunkai Huang (Southeast University)
- Hao Huang
- yalan huang (sichuan university)
- Taotao Huang (HTS-110 Ltd)
- Wenmei Huang (Hebei University of Technology)
- Xiongyi Huang
-
Zhen Huang
(Shanghai Jiao Tong University)
- Author in Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers
- Author in Experimental and numerical analysis of quench characteristics on a HTS coil by fault disturbance in HTS generator
- Author in Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Author in Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator
- Author in Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil
- Yawei HUANG (CEA Saclay)
- Yibing Huang (Oxford Superconducting Technology)
- Jui-Che Huang (National Synchrotron Radiation Research Center)
-
Lei Huang
(Southeast University)
- Author in Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion
- Author in Research on an Asymmetric-primary Hybrid-excitation Maglev Axis-flux Generator for the Vertical Axis wind Turbine
- Co-author in Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots
-
Lei Huang
(Southeat University)
- Co-author in Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Shuqian Huang (Sichuan University)
- Lei Huang (Jiangsu University)
- Xingbin Huang
- Xiaohua Huang (CEPRI, SGCC, Beijing,China)
- Hailin Huang
- Siqi Huang (Huazhong University of Science and Technology)
- Chih-Hsien Huang (NSRRC)
- Yujie Huang (Huazhong University of Science and Technology)
- Duke Hughes (US ITER Project)
- Hugo Hugo Bajas (CERN)
- Yu Hui (Institute of Electrical Engineering Chinese Academy of Science)
- Zhang Huiming
- John Hull (Boeing Company)
-
Lihua Huo
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
-
Jin Hur
(Incheon National University)
- Co-author in HTS Magnet with Smart Insulation Method
- Imrich Hušek (Institute of Electrical Engineering of SAS)
- Nigel Hussey (Radboud University Nijmegen - High Field Magnet Laboratory)
-
Nigel Hussey
(Radboud University Nijmegen - High Field Magnet Laboratory)
- Co-author in A novel clamping method for resistive magnets
- Nicolas Huttin (Sigmaphi)
-
Duck Young Hwang
(Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
- Co-author in Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Co-author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
-
Young Jin Hwang
(Korea Basic Science Institute)
- Author in Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit
- Sang-Moon Hwang (Pusan National University)
-
Seonho Hwang
(Chosun university)
- Author in Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
- Author in Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils
- Author in Characteristic analysis of SFCL DC interrupting system in Windfarm
- Author in Operating characteristics of Arc-induction type DC circuit breaker
- Yo Han Hwang (Hanyang University)
-
Ching-Shiang Hwang
(NSRRC)
- Author in Constructing a permanent magnet phase shifter
- Co-author in Design of a Short Period Permanent Magnet Helical Undulator
- Co-author in Low temperature Hall probe calibration system for the TPS cryogenic permanent magnet undulator
- Co-author in The Design of Magnetic Needles for Improving Magnetic Field Measurement System
- C.S. Hwang (National Synchrotron Radiation Research Center)
-
Chang Ju Hyeon
(Jeju National University)
- Author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil
- Co-author in Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
- No Hyun Woo (Korea Electrotechnology Research Institute)
- Akira IBI
- Akihiro Ida (The University of Tokyo)
- Momoe IDE (Tohoku University)
- Hajime Igarashi (Hokkaido University)
- Mitsunori Igarashi (Fujikura Ltd.)
- Susumu Igarashi (High Energy Accelerator Research Organization)
- Masahide Iguchi (National Institutes for Quantum and Radiological Science and Te)
-
Masahisa Iida
(KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
-
Yasuhiro Iijima
(Fujikura Ltd.)
- Author in Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
- Author in In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
- Co-author in Performance of two-ply four-filaments Gd123 tape coil
- Masami Iio (High Energy Accelerator Research Organization (KEK))
-
Kenichi Ikeda
(Kyoto University Graduate School)
- Author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
- Co-author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
- Shuhei Ikeda (Aoyama-Gakuin Univ.)
- Yukiko Ikemoto (KEK)
- Yukiko Ikemoto (KEK)
- Yuichi Ikuhara (The University of Tokyo)
- Veronica Ilardi (Twente Technical University (NL))
-
Yury ILIN
(ITER IO)
- Author in Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling
- Author in Qualification Program of Joints for ITER Coils
- Co-author in Analyses of the ITER Poloidal Coil joints cold test results.
- Co-author in Manufacturing and Qualification Test of ITER Busbar Joint
- Kirill Ilin (U)
-
Shinsaku Imagawa
(National Institute for Fusion Science)
- Author in Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor
- Author in Experimental study on the effect of twisting on critical currents of Nb3Sn cable-in-conduit conductors
- Author in Test of ITER-TF joint samples with NIFS test facilities
- Sehwan In (Korea Institute of Machinery and Materials)
-
Masanobu Ino
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
-
Masayoshi Inoue
(Kyushu University)
- Author in Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Author in In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
- Tatsuya Inoue (Mitsubishi Electric Corporation)
- Shigeru Ioka (Toshiba Corporation)
- Yoshiro Irie (KEK)
- Kenji Ishibashi (Kyushu University)
- Atsushi Ishihara (Railway Technical Research Institute)
- Yusuke Ishii (Toshiba Corporation)
-
Atsushi Ishiyama
(Waseda University)
- Author in A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils
- Author in Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape
- Author in Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils
- Author in Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape
- Author in Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Takanori Isobe (University of Tsukuba)
- Takaaki Isono (QST)
- Takaaki Isono (National Institutes for Quantum and Radiological Science and Technology, Naka, Japan)
-
Satoshi Ito
(Tohoku University)
- Author in Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors
- Co-author in Nonlinear multiscale structural analysis of a superconducting coil and support structure for the helical fusion reactor
- Co-author in Numerical and Experimental Evaluations of the Quench Detection Performance of NbTi/YBCO Hybrid Tape
- tetsuya ito (Kyushu University)
-
Yoshitaka Itoh
(IMRA Material R&D Co., Ltd.)
- Co-author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
- Co-author in Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
- Co-author in Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
- Co-author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
- Rafael Iturbe (ANTEC Magnets S.L.U.)
- Denis Ivanov (NRC Kurchatov Institute)
- Ilia Ivashov (Forschungszentrum Jülich GmbH)
-
Sadanori Iwai
(Toshiba Corporation)
- Author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Author in Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Co-author in Performance of two-ply four-filaments Gd123 tape coil
-
Masataka Iwakuma
(Kyushu University)
- Author in Electrical analysis for 15MW REBCO designed wind turbine generators
- Co-author in AC Loss Properties of Stacked Multifilamentary REBCO Superconducting Tapes
- Co-author in Additional AC loss properties of REBCO superconducting two-strand parallel conductors
- Co-author in Basic study of superconducting coils in rectifier transformers for railway electrification system
- Co-author in Current sharing properties of REBCO superconducting parallel conductors wound into a coil
- Akifumi Iwamoto (National Institute for Fusion Science)
-
Yukikazu IWASA
(M)
- Author in A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
- Author in A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
- Co-author in A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Co-author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Co-author in HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
- Yoshihisa Iwashita
- Takeshi Iwashita (Hokkaido University)
- Yoshiyuki Iwata (QST(NIRS) )
-
Susana Izquierdo Bermudez
(CERN)
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Co-author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Co-author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Parametric Study of Block-coil Dipoles Using Graded Conductors
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
-
Teruo Izumi
(Advanced Industrial Science and Technology)
- Author in Electrical analysis for 15MW REBCO designed wind turbine generators
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Co-author in AC Loss Properties of Stacked Multifilamentary REBCO Superconducting Tapes
- Co-author in Current sharing properties of REBCO superconducting parallel conductors wound into a coil
-
Jang Jae Young
(Korea Basic Science Institute)
- Author in Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on a Multi-pole Electro-magnet using Parallel Iron-core Structure
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Optimal Design Methodology of Multi-Width HTS Magnet
- Author in Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit
- Animesh Jain (Argonne National Laboratory)
- Jyh-Chyuan Jan (NSRRC)
- J.C. Jan (National Synchrotron Radiation Research Center)
- Gang-Hyeon Jang
-
Gang-Hyeon Jang
(Chungnam National University)
- Author in Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM.
- Co-author in Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array
- Co-author in Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator
- Vincent JANNOT (CEA France)
- Nicolas Jaouen (Synchrotron SOLEIL)
- Farek Jaromir (ITER Organization)
- Jan Jaroszynski (National High Magnetic Field Laboratory)
- B. Jarvis (NHMFL/FSU)
-
Brent Jarvis
(NHMFL-FSU)
- Co-author in 32T Protection Design and Operation
- Mark Jaski (Argonne National Laboratory)
-
Rémi Jaymond
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Liu J.C.
- P. Jehanno (Sigmaphi Accelerator Technology)
- Patrice Jehanno
-
Haeryong Jeon
(Yonsei University)
- Author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
-
In-Sung Jeong
(Chosun University)
- Author in Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
- Author in Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils
- Author in Characteristic analysis of SFCL DC interrupting system in Windfarm
- Author in Characteristics of superconducting coil-type DC Fault Current Limiter to increase stability in DC power system
- Author in Characteristics of SWPT according to the number of transmitting and receiver coils.
- Hyun Gi Jeong (Chonbuk National University)
- Jinghua Ji (JiangSu University)
- Bolei Jia (Shanghai Institute of Applied Physics, Chinese Academy of Scie)
- Jiaming Jiang
- Jyanyi Jiang (National High Field Magnet Lab, FSU)
- Donghui Jiang
-
Fan Jiang
- Author in Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center
- Co-author in Fatigue failure analysis of a 60T pusled magnet at the WHMFC
- Co-author in Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method
-
Jianyi Jiang
(Florida State University)
- Author in Present status of Bi-2212 conductor technology
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Yuan-Wu Jiang (School of Mechanical Engineering, Pusan National University)
-
Zhenan Jiang
(Robinson Research Institute)
- Author in Magnetization loss in REBCO Roebel cables with varying strand numbers
- Author in Optimising rotor speed and design for an externally-mounted HTS dynamo
- Author in Temperature dependent behaviour of a barrel-type HTS dynamo
- Co-author in Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors
- Co-author in Frequency ramping effects on a dynamo-type HTS flux pump
- Co-author in Impact of stator ring width on output of a dynamo-type HTS flux pump
- Junjie Jiang (Shanghai Jiao Tong University)
- Li Jiangang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Lee Ji-Kwang (Woosuk University)
- M. Jimenez (Fusion for Energy)
- Marc Jimenez (Fusion For Energy)
-
Zhijian Jin
- Author in Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers
- Author in Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Author in Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current
- Author in Quench and Recovery Characteristics of Racetrack Coil for Large-capacity Wind Generator
- Author in Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil
-
Shi Jin
(Shenyang University of Technology)
- Author in Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion
- Author in Study on fault-tolerant control of open-winding brushless doubly-fed wind power generator
- Co-author in Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor
- Co-author in Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields
- Co-author in Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor
- Co-author in Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine
- Chang-Sung Jin (Hanwha Techwin)
- Peng Jin (Tsinghua University)
- Huan Jin
- Jing Jin
- Z. Jin
- Xinzhe Jin (Muroran Institute of Technology)
- Mana Jinbo (Sophia univ.)
- Liwei Jing
-
Hantao Jing
- Co-author in Prototype Design of the Dipole for EMuS at CSNS
- Libing Jing
- Kaiming Jing (Institute of Plasma Physics, Chinese Academy of Sciences)
- Qin Jingang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Ji Jinghua (Jiangsu university)
- Guillaume Jiolat (CEA)
- Hyun Chul Jo (IBS)
- Younjung Jo (Kyungpook National University)
-
Young-Sik Jo
(Korea Electrotechnology Research Institute)
- Author in HTS Magnet with Smart Insulation Method
- Co-author in 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire
- Co-author in Robust REBCO coated conductor with meatal stitching stabilizer
- Co-author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
-
Rolland Johnson
(Muons, Inc.)
- Co-author in Construction and Testing of Curved ReBCO Coils
- Adam Johnstone (Siemens Healthcare)
- Adam Johnstone (Siemens Magnet Technology)
- Cornelis Jong (ITER Organization)
-
Kyoung-Jin Joo
- Author in Air-gap Control for Superconducting-Hybrid Magnetic Levitation Systems via Linear Matrix Inequality Optimization
- Author in Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives
- Co-author in A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Co-author in A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
- Co-author in Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator
- Co-author in Torque Control of IPMSM considering actual controller and driving condition
- Sung-Kwan Joo (Korea University)
-
Piyush Joshi
(Brookhaven National Laboratory)
- Author in 24kA DC Energy Extraction Switch for LARP Magnet Testing at BNL
- Author in Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil.
- Author in Design, Construction and Test of HTS/LTS Hybrid Dipole
- Author in High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search
- Author in LTS-HTS Hybrid Dipole Magnet Quench Protection System
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Jean-Yves Journeaux (ITER)
- Lee Ju
-
Mariusz Juchno
(CERN)
- Author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Laquiere Julien (ITER Organization)
- Byung-Hyuk Jun (Korea Atomic Energy Research Institute)
- Hyun-Woo Jun (Hanyang University)
- Gong Jun
- Gong Jun
-
Sang-Yong Jung
(Sungkyunkwan Univ)
- Author in A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization
- Author in Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method
- Author in Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics
- Author in Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet
- Author in Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region
- Author in Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region
- Author in Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
- Author in Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet
- Author in Numerical Analysis of Variable Flux Memory Motor Considering Characteristics of Permanent Magent Load-Line
- Author in Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization
- Author in Structural Design Methodology of BLDC Motor Considering Response Time of Phase Current
- Dong-Hoon Jung
- Sang-Yong Jung (Sungkyunkwan University)
- Zheng Junqiang (Jiangsu university)
-
Francois-Paul Juster
(CEA)
- Author in Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet
- Author in Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Co-author in Quench propagation measurements on 2 km MgB2 coil up to 4 T.
- Tomohiro Kagiyama (Sumitomo Electric Industries, Ltd.)
- Stephen Kahn (Muons, Inc.)
- Zhang Kai (IHEP)
- liu kai
- Kazuhiro Kajikawa (Kyushu University)
- Kentaro Kajita (Sophia University)
-
Hideki Kajitani
(National Institutes for Quantum and Radiological Science and Te)
- Author in Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor
- Author in New inspection method of joint resistance at room temperature for ITER TF Coil
- Author in Study of bending behavior in Nb3Sn strands
- Author in Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
- Co-author in Current Center Line Measurement of ITER TF Coil
- Co-author in Series Production of ITER TF Coil Winding Pack in Japan
- Co-author in Test of ITER-TF joint samples with NIFS test facilities
- Kazuomi Kakimoto (Fujikura Ltd.)
- Alexander Kalimov (St. Petersburg State Polytechnic University)
- Hiroharu Kamada (Meiji university)
- Hiroharu Kamada (Meiji University)
- Masahiro Kamibayashi (Sophia univ.)
- Sedlak Kamil
- Atsushi Kamitani (Yamagata University)
- Junichiro Kamiya (JAEA/J-PARC)
- Changtao Kan (North China Electric Power University)
- Kouki Kanamori (Niigata University)
-
Shino Kanamori
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Liu Kang (Southwest Jiaotong University)
- Dong-Woo Kang (Keimyung University)
- Wen Kang (Institute of High Energy Physics (IHEP))
- Hyoungku Kang (Korea National University of Transportation)
- Dong-Woo Kang (Keimyung University)
- Min Hyeok Kang (Jeju National University)
-
Tomoharu Karashima
(Kyoto University)
- Author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
- Co-author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
-
Anna Kario
(KIT)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Gennadiy Karpov (BINP SB RAS)
- Sergey Karpov (Budker Institute of Nuclear Physics)
- Mikko Karppinen (CERN)
- Vadim Kashikhin (Fermilab)
- VLADIMIR KASHIKHIN (Fermilab)
-
Evgeny Kashtanov
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Kota Katayama (Furukawa Electric Co., Ltd.)
- Takeharu Kato (Japan Fine Ceramics Center)
- Takeshi Kato (Sumitomo Electric Industries, Ltd.)
- Masahiro Kato (Tohoku University)
- Atsushi Katsuki (Ashikaga Institute of Techonolgy)
- Andrey Kaul (SuperOx)
- Shuma Kawabata (Kagoshima University)
-
Hiroshi Kawamata
(KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Katsumi Kawano (National Institutes for Quantum and Radiological Science and Technology)
- Takeshi Kawashima (Kyoto University)
-
Mario Kazazi
(Cea Saclay)
- Author in A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes
- Co-author in Measurement campaign on critical current for MgB2 wires and tapes under a magnetic field up to 8T
- Co-author in Quench propagation measurements on 2 km MgB2 coil up to 4 T.
- Imamura Kazutaka (Kyushu University)
- C Ke
- Vladimir Kekelidze (Joinr Institute for Nuclear Research)
-
Joshua Kellams
(Accelerator Technology Corp.)
- Author in Cable-in-Conduit Dipoles for the Ion Ring of JLEIC
- Author in High-field dipoles using superconducting cable-in-conduit
- Author in Stealth superconducting magnet technology for collider IR and injector requirements
- Author in Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening
- Martin Keller (THEVA Dünnschichttechnik GmbH)
- Juergen Kellers (ECO 5 GmbH)
- Hamlet Khodzhibagiyan (Joint Institute for Nuclear Research)
- Andreas Kienzler (Karlsruhe Institute of Technology)
-
Rei Kikuchi
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Akihiro Kikuchi (National Institute for Material Science, NIMS)
- Masashi Kikuchi
- Dong Lak Kim (Center for Axion and Precision Physics Research, IBS)
-
SeokBeom Kim
(Okayama University)
- Author in Characteristics of current bypassing and transient stability in partial insulation HTS coils
- Author in Development of HTS bulk NMR relaxometry with ring-shaped iron rings
- Author in Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape
-
Junseong Kim
(Yonsei Univ.)
- Author in Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Hee-Jun Kim (Hanyang University)
-
Ji Hyung Kim
(Jeju National University)
- Author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
- Co-author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
- Kyungmin Kim (Kunsan National University)
- Won-Ho Kim (Gachon University)
- Chang-Hyun Kim (Department of Electricity, Vision College of Jeonju, Korea)
- Dongmin Kim (Changwon National University)
-
Sol Kim
(Electrical Information Department, yuhan university)
- Author in A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density
- Author in Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Co-author in SynRM Rib optimal Design method for High-Power Density
- Sung-Jin Kim (Chosun University)
- Jeong-Man Kim (Chungnam National University)
- Kwang Pyo Kim (National Fusion Research Institute)
- Hyungjun Kim (ITER Organization)
- Woo-Seok Kim (Korea Polytechnic University)
-
Seok-Beom Kim
(Okayama University)
- Co-author in HTS Magnet with Smart Insulation Method
- Tae Hwan Kim (Hyundai Wia)
- Y. O. Kim (NFRI)
- Do Gyun Kim (IBS)
- Young Sun Kim (Joongbu University)
- Hyun mi Kim (Sungkyunkwan University)
-
Seog-Whan Kim
(Korea Electrotechnology Research Institute)
- Co-author in 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire
- Co-author in HTS Magnet with Smart Insulation Method
- Co-author in Robust REBCO coated conductor with meatal stitching stabilizer
- Co-author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
- Sung-Jin Kim (Chosun University)
-
Jiman Kim
(Department of Materials Science and Engineering, Korea University, Seoul, Korea)
- Author in A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Author in Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet
- Co-author in Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Co-author in Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Co-author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- Co-author in Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
-
Hyung-Wook Kim
(Korea Electrotechnology Research Institute)
- Co-author in HTS Magnet with Smart Insulation Method
-
Doohun Kim
(Korea Electrotechnology Research Institute)
- Co-author in HTS Magnet with Smart Insulation Method
- Hee-Jun Kim (Dept. of Electronic Systems Engineering, Hanyang Univ.)
- Seok-ho Kim (Changwon National University)
- Y. H. Kim (CNU)
-
Chang-Woo Kim
(Chungnam National University)
- Author in Core Loss Analysis of Permanent Magnet Linear Synchronous Generator with Slotless Stator
- Co-author in Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM.
- Co-author in DESIGN CRITERIA FOR HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MOTORS CONSIDERING ROTOR MAGNET AND SLEEVE MATERIAL
- Co-author in Design of hybrid thrust magnetic bearing for heavy rotating shaft considering self-weight compensation according to axial load
- Co-author in Integrated Motor Propulsor Magnet Design with Hybrid Halbach Array for Torque Ripple Reduction
- Juhong Kim (Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
-
Ho Min Kim
(Jeju National University)
- Author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
- Co-author in Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in HTS Magnet with Smart Insulation Method
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
-
Yong-Jae Kim
(Chosun University)
- Author in Optimization of the Pole Piece in Coaxial Magnetic Gears for Transfer Torque Ripple Improvement
- Co-author in A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization
- Co-author in Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method
- Co-author in Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics
- Co-author in Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet
- Co-author in Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region
- Co-author in Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region
- Co-author in Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
- Co-author in Numerical Analysis of Variable Flux Memory Motor Considering Characteristics of Permanent Magent Load-Line
- Co-author in Structural Design Methodology of BLDC Motor Considering Response Time of Phase Current
- Taewon Kim (Research Institute of industrial Science & Technology)
- A-Rong Kim (Research Institue of industrial Science & Technology (RIST))
-
Seung-Joo Kim
(Korea Testing Certification)
- Co-author in A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Co-author in A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
- Co-author in Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives
- Tae-Hyun Kim (Mitsubishi Electric Corporation)
- Chul Kim (The Florida State University)
- Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)
-
Kwanglok Kim
(National High Magnetic Field Laboratory)
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
- Co-author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Co-author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Eel-Hwan Kim (Jeju National University)
-
Jaemin Kim
(SuNAM Co., Ltd.)
- Author in Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- YC Kim (Hanyang University)
- Myung Su KIM (Korea Basic Science Institute)
- Gwan tae Kim (Korea Electrotechnology Research Institute)
- Hyung-Wook Kim (Korea Electrotechnology Research Institute)
- Ho-sup Kim (Korea Electrotechnology Research Institute)
- Ho-Yong Kim (Korea Electrotechnology Research Institute)
- Yong-Jae Kim (Chosun University)
- Youngwook Kim (Korea University)
- Jeong-Man Kim
- Youngjae Kim (NHMFL/ASC)
- Ho-Min Kim (Department of Electrical Engineering, Jeju National University, Jeju, Korea)
- Chan-Joong Kim (Korea Atomic Energy Research Institute)
- Su-Hun Kim (Kyungpook National University)
- JunBeom KIM (CHOSUN University)
-
Young-Gyun Kim
(Korea University)
- Author in Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- Author in Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Yungil Kim (SuNAM Co.,Ltd)
- Ji Seong Kim (suwon Science College)
- Dae-Woo Kim (SUNGKYUNKWAN UNIVERSITY)
-
Jin-Seok Kim
(SUNGKYUNKWAN UNIVERSITY)
- Author in A study on Double Layer V-Shape Magnet Type IPMSM design in view of demagnetization
- Author in Analysis on Design Sensitivity of Permanent Magnet Motor using Lumped Magnetic Circuit Method
- Author in Numerical Analysis and Design of SPM Type Variable Flux Memory Motor Considering Magnetization and Demagnetization Characteristic of Permanent Magnet
- Co-author in Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization
- Young-Gyun Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)
-
Jong-Cheol Kim
(Department of Materials Science and Engineering, Korea University, Seoul, Korea)
- Co-author in A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil
- Co-author in A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
-
Kwangmin Kim
(National High Magnetic Field Laboratory)
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Co-author in Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
- Co-author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Co-author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Jimin Kim (Department of Materials Science and Engineering, Korea University, Seoul, Korea)
-
Nobuhiro KIMURA
(HIGH ENERGY ACCELERATOR RESEARCH ORGANIZATION, KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Shuzo Kinebuchi (Niigata University)
- michikazu kinsho (JAEA/J-PARC)
-
Glyn Kirby
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in A novel method for greatly reduced edge effects design in CCT magnets
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector.
- Author in E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Author in Open Material Property Library With Native Simulation Tool Integrations (OpMaST)
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Design and Analysis of an Energy-Extraction System for High Current HTS Magnets
- Co-author in Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors
- Co-author in The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology
-
Takanobu Kiss
(Kyushu University)
- Author in Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Author in In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
- Aernout Kisteman (VDL Enabling Technologies Group)
- Hitoshi Kitaguchi (National Institute for Materials Science)
- Kaname Kizu (National Institutes for Quantum and Radiological Science and Technology)
- Kaname Kizu (National Institutes for Quantum and Radiological Science and Technology)
-
Evgeny Klimenko
(SSI TRINITI)
- Author in LAMINAR SUPERCONDUCTING WINDINGS
- Andrea Kling (KIT, ITEP)
- Slava Klyukhin (M.V. Lomonosov Moscow State University (RU))
- Rakkyung Ko (Korea University)
-
Rock-Kil Ko
(Korea Electrotechnology Research Institute)
- Author in Repair method of locally defective or damaged coated conductor using the superconducting patch
- Author in Robust REBCO coated conductor with meatal stitching stabilizer
- Co-author in 2G HTS Magnet Stability Improvement via V2O3 Material and perforated HTS Wire
- Co-author in HTS Magnet with Smart Insulation Method
- Co-author in The effect of compositional ratio of SmBCO coated conductor on the superconducting properties.
- Tae Kuk Ko (Electrical and Electronic Engineering, Yonsei University, Seoul, Korea)
-
Tae Kuk Ko
(Electrical and Electronic Engineering, Yonsei University)
- Author in Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit
- Co-author in Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
- Takayuki Kobayashi
- Yusuke Kobayashi (Railway Technical Research Institute)
- Shin-ichi Kobayashi (Sumitomo Electric Industries, Ltd.)
- S. Koczorowski (ITER IO)
- Ryo Koike (Aoyama Gakuin Univ.)
- Jaakko Henrik Koivuniemi (Univ. Illinois at Urbana-Champaign (US))
-
Norikiyo Koizumi
(National Institutes for Quantum and Radiological Science and Technology)
- Author in Series Production of ITER TF Coil Winding Pack in Japan
- Author in Study of bending behavior in Nb3Sn strands
- Author in Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
- Co-author in Current Center Line Measurement of ITER TF Coil
- Co-author in New inspection method of joint resistance at room temperature for ITER TF Coil
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Co-author in Test of ITER-TF joint samples with NIFS test facilities
- Tomoaki Koizumi (Okayama University)
- Akane Kojima (Sophia University)
- Charilaos Kokkinos (FEAC Engineering P.C.)
- Sotiris Kokkinos (FEAC Engineering P.C.)
- Boris Kolbasov (NRC Kurchatov Institute)
- J. Kolonko (Unknown)
- Toshihiro Komagome (Mayekawa MFG Co.Ltd)
- Akihiro Kondo (University of Tokyo)
- Ershuai Kong (USTC)
- Wubin Kong
- yong kong
- Masayuki Konno (Fuji Electric)
- Anton Konstantinov (JINR)
- Min-Mo Koo
- Min-Mo Koo
- Jae-Hong Koo (Department of Electronic System Engineering)
- Lubomír Kopera (Institute of Electrical Engineering of SAS)
- Stepan Kopylov (Budker Institute of Nuclear Physics)
- m Koratzinos (Universite de Geneve (CH))
-
Georg Korn
(ELI-Beams)
- Co-author in Design of a laser-driven kiloTesla magnetic bottle
- G. Korn (ELI-Beamlines)
- Tadashi Koseki (KEK)
- Jaap Kosse
- CHARALAMPOS KOSTOPOULOS (FUSION FOR ENERGY)
- C. Kostopoulos (Fusion for Energy)
- Sergei Kostromin (Joint Institute for Nuclear Research)
-
Evgeny Kostrov
(RTI Cryomagnetic systems)
- Author in MRI scanner development in Russia
- Co-author in Performance test of 1.5 T cryogen free orthopedic MRI magnet
- Pavol Kovac (Institute of Electrical Engineering of SAS)
- Ján Kováč (Institute of Electrical Engineering of SAS)
- Paul Kovach (Brookhaven National Laboratory)
-
Chris Kovacs
(The Ohio State University)
- Author in An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla
- Co-author in YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T
-
Oleg Kovalchuk
- Co-author in The PF1 coil electrical joint test results
- Kei Koyanagi (TOSHIBA Corporation)
-
Kei Koyanagi
(Toshiba Corporation)
- Co-author in Characteristics of an HTS dipole magnet
- Tadeusz Kozielewski (Forschungszentrum Jülich GmbH )
-
Sergey Kozub
(State Res.Center of Russian Feder. Inst.f.High Energy Phys. (IFVE))
- Author in Fast Cycling Superconducting Quadrupole
-
Steffen Kraemer
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Boris Krakovsky (JSC “NPO GELIYMASH”)
-
Bernward Krause
(DESY)
- Author in Fast dipole magnet development
-
Steve Krave
(Fermilab)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Fabrication and Measurement of New Inflector for g-2
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Pawel Krawczyk (NCBJ)
-
Erik Krooshoop
(University of Twente)
- Co-author in Self-heating effect in HTS coils
- Marcel Kruip (Siemens Healthineers)
- Dazhi KUANG (CHMFL)
- Guangli Kuang
- Yoichi Kubo (Toshiba Corporation)
-
Wouter Kühlkamp
(University of Twente)
- Co-author in Quench protection of an MgB2-based MDS magnet system
- Tobias Kulenkampff (Vienna University of Technology (AT))
- Miloslav Kulich (Institute of Electrical Engineering of SAS)
- Hiroaki Kumakura (National Institute for Materials Science)
- Lu Kun (Institute of Plasma Physics, Chinese Academy of Sciences)
- Chang-Hor Kuo
-
Cheng-Ying Kuo
(NSRRC)
- Author in Constructing a permanent magnet phase shifter
- Author in Design of a Short Period Permanent Magnet Helical Undulator
- Author in Injection control by neural network approach for Pulse-magnet of Taiwan Light Source
- Co-author in Low temperature Hall probe calibration system for the TPS cryogenic permanent magnet undulator
- Co-author in The Design of Magnetic Needles for Improving Magnetic Field Measurement System
-
Tomohisa Kurita
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Schaubel Kurt (General Atomics)
-
Tsutomu Kurusu
(Toshiba Corporation)
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Boris Kuteev (NRC Kurchatov Institute)
- Ik-Soo Kwon (Department of Electronic System Engineering)
- Joong-Hak Kwon (Research and Development Center, EM-TECH)
- Radcliff Kyle (Applied Superconductivity Center-NHMFL)
- John Kynoch (NHMFL-FSU)
-
Abdelaziz LABRAG
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
- Jérôme Lacipière (Institut Néel)
-
Friedrich Lackner
(CERN)
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment
- Author in Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
- Co-author in Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
-
Benoit LACROIX
(CEA)
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
-
Jean-Marc Lagarrigue
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
- Valtteri Lahtinen (Tampere University of Technology)
- Zhipeng Lai (Huazhong University of Science and Technology)
- Juanquan Lai (Huazhong University of Science & Technology)
-
M'hamed Lakrimi
(Siemens Magnet Technology)
- Co-author in Lead-free persistent mode joints between NbTi wires
-
Michael Lamm
(Fermi National Accelerator Laboratory (FNAL))
- Author in Production of Aluminum Stabilized Superconducting Cable for the Mu2e Transport Solenoid
- Author in The Mu2e Solenoid Cold Mass Position Monitor System
- Co-author in Hall probe Calibration System Design for the Mu2e Solenoid Field Mapping System
- Co-author in Mu2e Solenoid Field Mapping System Design
- Eugeny Lamzin (JSC "NIIEFA")
- Jean Luc Lancelot (Sigmaphi)
- Christian Lange (Karlsruhe Institute of Technology)
- Christian Lange (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Stefanie Langeslag (CERN)
- Hervé Lannou (CEA)
-
David Larbalestier
(National High Magnetic Field Laboratory)
- Author in Fabrication and Testing of Bi-2223 Insert Coils for High Field NMR Magnets
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Author in Present status of Bi-2212 conductor technology
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Co-author in Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
- Delbert Larson (Particle Beam Lasers, Inc.)
-
Steven LASSITER
(Jefferson Lab)
- Author in Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
- Co-author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- S. Lauciani
- Gideon Laureijs (Radboud University Nijmegen-High Field Magnet Laboratory-)
- Jung Laurent (National Fusion Research Institute)
- Pascal Lavie (CEA Saclay)
- Dinh-Vuong Le (Changwon National University)
- Tat Thang Le (Changwon National University)
-
Gael Le Bec
(ESRF)
- Co-author in Permanent Magnet Dipoles For the ESRF Upgrade
-
Florence Lecouturier
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
-
Quentin Le Coz
(CEA-IRFM)
- Author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Christophe Lecrenn (Sigmaphi)
- Thibault LECREVISSE (CEA-Saclay)
-
Gang Seok Lee
(Hanyang Univ.)
- Author in Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Author in Design of maximum power density of TVC driving motor for space launch vehicle considering space environment
- Co-author in A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Co-author in A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
- Co-author in Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit
- Co-author in Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator
- Co-author in Thermal limit curve calculation for squirrel cage induction motor based thermal equivalent circuit
- Co-author in Torque Control of IPMSM considering actual controller and driving condition
-
Ju Lee
(Hanyang University)
- Author in Air-gap Control for Superconducting-Hybrid Magnetic Levitation Systems via Linear Matrix Inequality Optimization
- Author in Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Author in Design of maximum power density of TVC driving motor for space launch vehicle considering space environment
- Co-author in A Study on the Auto-MTPT Algorithm to Make the Speed-based Current-map of IPMSM for Traction of Inwheel
- Co-author in A study on the control method of lateral displacement and yaw angle in severely curved driving of IRWs system
- Co-author in A study on the individual control method comparing the lateral displacement control of front wheel and rear wheel of IRWs system
- Co-author in Characteristic Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density
- Co-author in Design of a Non Rare Earth Spoke Type Permananet Magnet Motor for Considering Magnetization after Assembly
- Co-author in HEV Motor Comparison of IPMSM with Sintered Rare-Earth Mangnet and Bonded Dy Free Injection Magnet in the Same Size
- Co-author in Nonlinear Sensorless Control including Zero Speed of Permanent Magnet Synchronous Motor Drives
- Co-author in Novel Control Strategy of Wave Energy Converter using Linear Permanent Magnet Synchronous Generator
- Co-author in SynRM Rib optimal Design method for High-Power Density
- Co-author in The Investigation of Cogging Torque Reduction Technologies
-
Jiho Lee
(Massachusetts Institute of Technology)
- Author in A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
- Author in A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
- Co-author in Analytic Study of the Active Quench Detection Method for the HTS Magnet using Resonance circuit
- Co-author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Co-author in HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
- Demi Lee (NSRRC)
- Sang-Taek Lee (Korea Electronics Technology Institute)
- Christopher H.T. Lee (The University of Hong Kong)
- KIDOEK LEE (Korea Electronics Technology Institute)
- JEONGJONG LEE (Korea Electronics Technology Institute)
- Ji-Young Lee (Center for Axion and Precision Physics Research, IBS)
-
Tae-Yong Lee
(Sungkyunkwn Univ)
- Author in Design of Vernier Motor considering Irreversible Demagnetization in Permanent Magnet
- Author in Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region
- Co-author in Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
- Jae Hun Lee (SuNAM Co. Ltd.)
-
jeyull Lee
(Yonsei University)
- Author in Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
- Chankyeng Lee (Changwon National University)
- HyunJung Lee (National Fusion Research Institute)
- Changhyeong Lee (Changwon National University)
- Sang-Taek Lee (Korea Electronics Technology Institute)
- Kang Won Lee (Joongbu University)
- Hyungwoo Lee (Korea National University of Transportation)
- Woo Seung Lee (JH Engineering Corp.)
-
Jae-Kwang Lee
(hanyang university)
- Author in SynRM Rib optimal Design method for High-Power Density
- Co-author in Design of a Non Rare Earth Spoke Type Permananet Magnet Motor for Considering Magnetization after Assembly
- Co-author in Design principle of WFSM for Electric Vehicle based magnetic-thermal equivalent circuit
- Co-author in Estimation of Permanent Magnet Temperature using d-axis Current for IPMSM
- Co-author in Proposed Commutation Method for Performance Improvement of Brushless DC Motor
- Co-author in Thermal limit curve calculation for squirrel cage induction motor based thermal equivalent circuit
- Sang Heon Lee (Sunmoon University)
-
SangGap Lee
(Korea Basic Science Institute)
- Author in Design and Implementation of Ferromagnetic Shims for a 3-T 100 mm All-REBCO No-Insulation Magnet
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Optimal Design Methodology of Multi-Width HTS Magnet
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in Defect-Irrelevant Behavior of No-Insulation REBCO Coils at 4.2 K
- Co-author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
-
Sangjin Lee
(Uiduk University)
- Author in Optimal Design of the LTS Magnet employing Genetic Algorithm for EMPS
- Co-author in A Study on the Sextupole Design with Iron Yoke inside Solenoids for 56 GHz ECR Ion Source
- Co-author in Beam Trajectory Simulation Considering Each Harmonic Components in HTS Quadruple Triplet
- Co-author in Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Jae-Jun Lee (Hyundai Heavy Industries Co.,Ltd)
-
Shin-Won Lee
(Jungwon University)
- Author in Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings
- Author in Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding
- Sergey Lee (SuperOx Japan LLC)
- Yeo-Jin Lee (Korea Atomic Energy Research Institute)
- Woo Seung Lee (JH Engineering)
- Se-Hee Lee (Kyungpook National University)
-
Haigun Lee
(Korea University)
- Author in A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Author in A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil
- Author in A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers
- Author in Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
- Author in Design and Performance Results of Optimal Vapor-Cooled MgB2 Current Leads for a 1.5 T MRI Magnet
- Author in Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Author in Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
- Author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- Author in Quench and Recovery Characteristics of MgB2 Coil with Various Protection Schemes
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Jae-Hak Lee (SungKyunKwan University)
- Chang young Lee (Korea Railroad Research Institute)
- SUNG GU LEE (Busan University of Foreign Studies)
- Hunju Lee (SuNAM Co., Ltd.)
- Jeong-In Lee (CHUNGNAM NATIONAL UNIVERSITY)
- Onyou Lee (Electrical Engineering, Korea National University of Transportation)
- Bang-Wook Lee (Hanyang University)
-
Hongseok Lee
(Korea National University of Transportation)
- Author in A Study on the V-t Characteristics of PPLP according to Electric Field Uniformity for a Superconducting Transformer
- Author in Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
- Co-author in Comparative Study of Magnetic Characteristics between Air-Core and Iron-Core High-temperature Superconducting Quadruple Magnet
- Co-author in Creepage Discharge Characteristics of a Solid Insulation Material for Superconducting Applications
- Ji-Han Lee (Sungkyunkwan Univeristy)
- Gang Lei (UTS)
- Yong Lei (sichuan university)
- Hanno Leibrock (GSI Darmstadt)
- Sergey Lelekhov (Russian ITER Center)
- Sandrine Le Naour (CERN)
- Antonio Leone (Univ. + INFN)
- M. J. Leray (Sigmaphi Accelerator Technology)
- Evgeny Levichev (Budker Institute of Nuclear Physics (RU))
- Jeremy Levitan (NHMFL)
-
Dawei Li
(School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
- Author in Design and Analysis of a Novel Large Mover Slot Opening Flux-Reversal Linear Permanent Magnet Machine with HTS Bulks
- Co-author in A Spoke-Type PM Vernier Machine with Multi Working Harmonics and Enhanced Flux Modulation Effect
- Co-author in Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions
- Jianfeng Li (Western Superconducting Technologies, Co. Ltd.)
- CS Li
- Jing Li
- Wenlong Li (Shenzhen University)
-
Liang Li
- Author in Decoupling Velocity and Thermal Effect in the Electromagnetic Ring Expansion Test
- Author in Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center
- Author in Fast cooling high field pulsed magnet with distributed mini cooling gaps
- Co-author in Design, fabrication, and test of a dual-coil system for electromagnetic sheet forming
- Co-author in Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life
- Co-author in Fatigue failure analysis of a 60T pusled magnet at the WHMFC
- Jianfeng Li (Western Superconducting Technologies Co. Ltd.)
- Qing Li (Institute of High Energy Physics)
- Pei Li (Fermi National Accelerator Laboratory)
- PY Li
- Deming Li
-
Lankai Li
(Institute of Electrical Engineering, Chinese Academy of Sciences)
- Author in Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor
- Author in Bending-peeling method to measure interface strength of YBCO tape
- Author in Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications
- Author in Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet
-
jingdong Li
(Huazhong University of Science and Technology)
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Co-author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
- Changran Li (Huazhong University of Science and Technology)
-
Shuai Li
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Yan Li (North China Electric Power University)
- Zhenhao Li
- Liang Li
- Ming Li (China Institute of Atomic Energy)
- Liang Li (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Xiang Li (Southwest Jiaotong University)
- Zhenxing Li
- Liang Li
- Fangyu Li
- Liang Li
- Fangyu Li
- Yafang Li (Key Laboratory of Electro-Magnetic Field and Electrical Apparat)
- Yang Li (Kyoto University)
- Huan Li (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Zhenxing Li
- Chao Li (University of Cambridge)
- Liang Li
- Zhenxing Li
- Zhuyong Li
- Chengshan Li (Northwest Institute for Non-ferrous Metal Research)
- rui li
-
Liang Li
(Huazhong University of Science and Technology)
- Author in A new three-level repetitive pulse magnetic field power supply system
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet
- Author in The implement of control and date acquisition system for the 100 T pulsed high magnetic field facility at WHMFC
- Co-author in Experimental and numerical investigations on the separation behavior of magnetic particles under an alternating gradient magnetic field
- Co-author in Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet
- Xiaoxiang Li (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Junjie LI (CHMFL)
- Li Li
- Bo Li (Institute of Plasma Physics, Chinese Academy of Sciences)
- Xiaojian Li (University of Bath)
- Jianwei Li (University of Bath)
- Zhenhua Li (China Three Gorges University)
- Jun Li (Institute of Plasma Physics, Chinese Academy of Sciences)
- Liang Li
- Guoliang Li
- Ming Li (SINAP, CAS)
- Xiang Li (Huazhong University of Science and Technology)
-
Zhuyong Li
- Author in Evaluation of Electrical Characteristics for a Twisted Soldered-Stacked-Square (3S) HTS Wire with 1 mm Width
- Author in Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Author in Reduction of the screening current field in HTS coils wound by using Soldering-Stacked-Square (3S) REBCO wires
- Co-author in Performance Degradation of YBCO Tapes after Suffering Lightning Impulse Current
- Dawei Li (Huazhong University of Science and Technology)
- Jian Li (Huazhong University of Science & Technology)
- Xide Li (Tsinghua University)
- Xiaoxiang Li (Huazhong University of Science and Technology)
- Qiu Li
- Liang Li
- nian li (Southeast university)
- Jianqiang Li (Shenzhen University)
- Rui Li (Shenzhen University)
- Chao Li
- Zhixiong Li (China University of Mining & Technology)
- Yi Li (Intitute of Electrical Engineering, Chinese Academy of Sciences)
-
Li Li
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Jinhao Li (Huazhong University of Science and Technology)
- Wenlong Li (The University of Hong Kong)
- Zhikai Liang (HUST)
- Yu Liang (Institute of Modern Physics, Chinese Academy of Sciences)
- Li Liang
- chen liang (Xi'an Superconducting Magnet Technology Co.,LTD)
- Ran Liang
- Hui Liang (Huazhong University of Science and Technology)
- Ming Liang (Northwest Insititute for Non-ferrous Metal Research)
- Qing Liang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Kun Liang (China University of Mining and Technology)
- Yu Liang
- Zhikai Liang (Huazhong University of Science and Technology)
- Chih-Yu Liao (NSRRC)
- Guojun Liao
- KEN LIBENS (FUSION FOR ENERGY)
- K. Libens (Fusion for Energy)
- P. Libeyre (ITER)
- Paul Libeyre (ITER Organization)
- Ralph Lietzow (Karlsruhe Institute of Technology KIT)
- Zhang Lihui
- B.S. Lim (ITER)
- Jae-Woo LIM (Hanyang Univ in KOREA)
- Byung Su Lim (ITER Organization)
- Seung-Taek Lim (Soongsil University)
- Zhong-Soo Lim (Research Institute of industrial Science & Technology)
-
JONGSUK LIM
(Hanyang university)
- Author in A Study on the Position Signal Compensation Control Technique of Hall Sensor Generated by Uneven Magnetic Flux Density
- Author in Design method of an ultra-high speed PM Motor/Generator for Electric-Turbo Compounding System
- Author in Design of maximum power density of TVC driving motor for space launch vehicle considering space environment
-
Sung-Hun Lim
(Soongsil University)
- Author in Comparative Study on Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiters (SFCLs) with Common Connection Point between Two Secondary Windings
- Author in Current Limiting and Recovery Characteristics of A Trigger Type SFCL using Double Quench
- Author in Current Limiting Characteristics of Transformer Type Superconducting Fault Current Limiter (SFCL) due to Winding Direction of Additional Secondary Winding
- mingyao lin
- Feng Lin (School of electrical and Electronic Engineering Huazhong University of Science and Technology)
- Jun Lin (China Institute of Atomic Energy)
- Andy Lin (Lawrence Berkeley National Laboratory)
- Fu Yuan Lin (National Synchrotron Radiation Research Center)
- mingyao lin (Southeast University)
- Liangzhen Lin (IEE, CAS)
- Thomas Lipton (Lawrence Berkeley National Laboratory)
- Steve Litherland (US ITER Project)
- Ilya Litvak (NHMFL-FSU)
- Shizhuo Liu (Institute of Electrical Engineering, CAS)
-
Xiaomei Liu
(Southeast University)
- Co-author in Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots
- Co-author in Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Chen Liu
- Yiyong Liu (SINAP, CAS)
- Kuo-Bin Liu (NSRRC)
- Qingfeng Liu (Applied Superconductivity Key Lab, Institute of Electrical Engineering, CAS, Being, 100190, China 2University of Chinese Academy of Sciences, Beijing, 100190, China and University of Chinese Academy of Sciences, Beijing, 100190, China)
- chengcheng liu (Hebei university of technology)
- Zheng Liu (China University of Mining and Technology)
-
Yiqin Liu
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Xu Liu (Huazhong University of Science and Technology)
- Kaifeng Liu (Huazhong University of Science and Technology)
- Xu Liu (HUST)
- Chen-Yao Liu (NSRRC)
- Kun Liu (South West JiaoTong University)
- Guohai Liu (Jiangsu University)
- Jiajun Liu (Tsinghua University)
- Jianwei Liu (Western Superconducting Technologies Co., Ltd.)
- Qingfeng Liu (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Mengyu Liu
- Kaifeng Liu (HUST)
- Guole Liu (the Institute of Electrical Engineering of the Chinese Academy )
- Xianghong Liu (Western Superconducting Technologies Co. Ltd.)
- Ning Liu (Huazhong University of Science and Technology )
- Jianwei Liu (Western Superconducting Technologies Co. Ltd.)
- Chenglian Liu (Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP)
- Bo LIU (ASIPP)
-
Jianhua Liu
(Intitute of Electrical Engineering, Chinese Academy of Sciences)
- Author in A Compact Test Bed for Critical Current Evaluation on High Temperature Superconducting Tape Samples
- Author in Control design of a magnetic catheter navigation system for cardiac arrhythmias
- Author in Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet
- Jie Liu (Argonne National Laboratory)
- Kun Liu (Southwest Jiaotong University)
- Qi Liu
- Kun Liu
- Yingzhen Liu (ITEP, KIT)
-
Guangwei Liu
(Shenyang University of Technology)
- Author in Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor
- Author in Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine
- Author in Study on Counter-rotating Dual Rotors Radial Permanent Magnet Motor for underwater vehicle Propulsion
- Author in Study on fault-tolerant control of open-winding brushless doubly-fed wind power generator
- Co-author in Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor
- Co-author in Eddy Current Loss Analysis of Surface Mount High Speed Permanent Magnet Motor Base on Multi-physics Fields
- Yang Liu (tate Grid Shandong Electric Power Research Institute)
-
Guohai Liu
(School of Electrical and Information Engineering, Jiangsu University)
- Author in Design of Dual-Channel Switched Reluctance Motor for Safety-Critical Applications Using Two 3-Phase Standard Inverters
- Author in Torque Ripple Minimization in a PM-assisted Synchronous Reluctance Motor with Different Flux Barrier Rotor
- Author in Vibration Comparison of Two Fault-Tolerant Flux-Switching Permanent-Magnet Machines
- Hongwei Liu (North China Electric Power University)
- Xianghong Liu (Western Superconducting Technologies, Co. Ltd.)
- Yang Liu
- Ning Liu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Bo LIU
- Xiao Liu (China University of Mining and Technology)
- Jing Liu (China University of Petroleum (Hua dong))
- Aimin Liu
- Huaiwen Liu (Hebei University of Technology)
- Jing LiWei (Institute of Electrical Engineering Chinese Academy of Science)
- Brahim LMOUDEN (Ibn Zohr University)
- Alessandro Lo Bue (Fusion For Energy)
-
Christian Hannes Loffler
(CERN)
- Co-author in Applied metrology in the production of superconducting model magnets for particle accelerators
- Co-author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Co-author in Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
- Florian Löhl (Paul Scherrer Institute)
- Vito Lombardo (Fermi National Accelerator Laboratory)
- Nicholas Long (Robinson Research Institute, Victoria University of Wellington)
- Ralph Longsworth (Sumitomo (SHI) Cryogenics of America Inc.)
- Mauricio Lopes (Fermilab)
- Daniel López (CIEMAT)
- Jose Vicente Lorenzo Gomez (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
-
Clement Lorin
(CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
- Author in Design of a Nb3Sn 16 T block dipole for the Future Circular Collider
- Author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Co-author in Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Clement Lorin
- Marcello Losasso (CERN)
- Jiachuan Lou (Shenyang University of Technology)
- Konstantinos Loukas (FEAC Engineering P.C.)
- Alexandre Loulergue (SOLEIL)
- Alexandre LOUZGUITI (CEA)
- Jun Lu (NHMFL)
- Zhen Lu (Jiangsu University)
- Yang Lu (Huazhong University of Science & Technology)
- Wang Lu (LBNL)
- Kun Lu
- Jun Lu (NHMFL - FSU)
- Jun Lu
- Ruben Lubkemann (University of Twente)
- J. Lucas (Elytt)
- Jason Lucero (LANL)
- Zhenghao Luo
- H.W. Luo (Department of Engineering and System Science, National Tsing Hua University)
- Vladimir Luzin (Australian Nuclear Science and Technology Organization)
- Yinlong Lv (China Institute of Atomic Energy)
- Yinlong Lv (China Institute of Atomic Energy)
-
Yiliang Lv
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System
- Author in Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center
- Author in Fast cooling high field pulsed magnet with distributed mini cooling gaps
-
Yuri Lvovsky
(Superconducting Design Solutions, Florence, SC, USA)
- Author in Conductor for MRI magnets beyond NbTi
- Panagiotis Lymperopoulos (University of Patras)
- Jeff Lyness (Siemens Magnet Technology)
- Jim Lynn (Oxford university)
- Charles Lyraud (ITER Organization)
- Valeriy Lysenko (Lebedev Physical Institute of the Russian Academy of Sciences)
- Guang-Tong Ma
- Tao Ma (Beijing Jiaotong University)
- Lizhen Ma (Institute of modern physics,CAS)
- Peng Ma (Xi'an Superconducting Magnet Technology Co.,Ltd)
- Guangtong Ma (Southwest Jiaotong University)
- Guangtong Ma
- Bo Ma (UTS)
- Takato Machi
- Michal Maciejewski (Technical University of Lodz(PL))
- Davide Macioce (ITER IO)
- Brian Macklin (ITER IO)
-
Arnaud Madur
(CEA Saclay)
- Author in A Wide Aperture Superconducting Vector Magnet for photon beamlines: WAVE Photons
- Author in Preliminary design of the FAIR Super FRS superferric branched dipoles
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Hideaki Maeda (j)
- Hideaki Maeda (RIKEN)
- Hideaki Maeda (riken)
- Mario Maggiore (LNL - INFN)
- M. Maggiore (INFN-LNL)
- Pierre-eric Maillard (Sigmaphi)
-
Milan Majoros
(The Ohio State University)
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Author in YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T
- Co-author in An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T
- Yasuhiro Makida (High Energy Accelerator Research Organization (JP))
- pierre-eric mallard (sigmaphi)
- Gerhard Mallot (CERN)
- O. Malpica (Fusion for Energy)
-
Franco Julio Mangiarotti
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
-
Pierre Manil
(CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
- Author in High definition 3D finite element analysis of low temperature Rutherford cable
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Yanxin Mao (School of Electrical and Information Engineering, Jiangsu Unive)
-
Maxim Marchevsky
(Lawrence Berkeley National Lab. (US))
- Author in Real-time functional diagnostics of superconducting magnets using acoustic techniques
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Jordi Marcos (ALBA)
- Jean Louis Marechal (CEA)
-
Daniele Margarone
(ELI-Beams)
- Co-author in Design of a laser-driven kiloTesla magnetic bottle
- D. Margarone (ELI-Beamlines)
- Nicola Mariani (ITER IO)
- Iker Marino (TECNALIA)
-
Vittorio Marinozzi
(University of Milan / INFN)
- Author in Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
- Samuele Mariotto (University of Milan - INFN Milan)
- Jan Marjanovič (CAEN ELS s.r.l.)
-
Denis Markiewicz
(NHMFL)
- Co-author in 32T Protection Design and Operation
- W.D. Markiewicz (NHMFL/FSU)
- Lee Marks (NHMFL)
- Thomas Marone (University of Rochester)
- Andrew Marone (Brookhaven National Laboratory)
- William Marshall (National High Magnetic Field Laboratory)
-
Maxim Martchevskii
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Fabrice Marteau (Synchrotron SOLEIL)
- Teresa Martinez de Alvaro (ciemat)
- Nicolai Martovetsky (ORNL)
- Nicolai Martovetsky (ORNL)
- Egor Marushin
- Vassily Marusov (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
-
Kei Masaki
(National Institutes for Quantum and Radiological Science and Technology)
- Co-author in [Invited] JT-60SA Magnet System Status
- Ohya Masayoshi
- Valenti Massana (CELLS)
- giovanni masullo
- Tetsuya Matsuda (Mitsubishi Electric Corporation)
- Naohiro Matsuda (Sophia University)
-
Kunihiro Matsui
(National Institutes for Quantum and Radiological Science and Technology)
- Author in Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
- Co-author in New inspection method of joint resistance at room temperature for ITER TF Coil
- Co-author in Series Production of ITER TF Coil Winding Pack in Japan
- Co-author in Test of ITER-TF joint samples with NIFS test facilities
- Shusuke Matsumaru (Aoyama Gakuin Universuty)
- Akiyoshi MATSUMOTO (NIMS)
- Shinji Matsumoto (National Institute for Materials Science)
- Ryuta Matsuo (Sophia University)
- olivier maulat
- Oleg Mavritskii (National Research Nuclear University MEPhI (NRNU MEPHI))
-
Christophe MAYRI
(CEA Saclay)
- Co-author in [Invited] JT-60SA Magnet System Status
- Jacky Mazet (CERN)
- David Mazur (CERN)
- John McGarrahan (North Carolina State University)
-
Peter McIntyre
(Texas A&M University)
- Author in Cable-in-Conduit Dipoles for the Ion Ring of JLEIC
- Author in High-field dipoles using superconducting cable-in-conduit
- Author in Stealth superconducting magnet technology for collider IR and injector requirements
- Author in Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening
- Dustin McRae (NHMFL)
- Dustin McRae (National High Magnetic Field Laboratory)
- Jean-louis Meauriot (CEA saclay)
- Enming Mei
-
Ziad melhem
(Oxford Instruments)
- Author in CRYOGENIC ENVIRONMENTS FOR QUANTUM TECHNOLOGIES
- Author in LOW VIBRATION VAPOUR SHIELDED CRYOSTATS FOR WIDE BORE HIGH FIELD MAGNETS
- Author in Quench Behaviour of Bi2Sr2CaCu2O8+x insert coils for high field magnets
- Co-author in The FuSuMaTech initiative: Synergy with Industry and Impact on the Future Superconducting Magnet Technology
- Ziad Melhem
- Tibor Melišek (Institute of Electrical Engineering of SAS)
- Jonathan Menard (Princeton Plasma Physics Laboratory)
- Rossi Mendez (Demaco Holland B.V.)
- Qiumin Meng (Hefei Institutes of Physical Science., Chinese Academy of Scien)
-
Matthias Mentink
(CERN)
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils
- Author in New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications
- Author in Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors
- Co-author in FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
- Co-author in Superconducting Detector Magnets for CERN’s Future Circular Collider
- Francois Meot (Brookhaven National Laboratory)
- Jose Merino (TECNALIA)
- Lucio Merli (Tratos cavi)
- Florian Meuter (University of Applied Sciences (DE))
- Christian Meyer (Federal Laboratory for Materials Research (BAM))
- Ingeborg Meyer (Karlsruhe Institute of Technology)
- Nikolay Mezentsev (Budker Institute of Nuclear Physics)
- Hanping Miao (Bruker-OST)
- Xu Miaofu (Institute of High Energy Physics(IHEP))
-
Philip Michael
(Massachusetts Institute of Technology)
- Author in A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
- Author in A REBCO Persistent-Current Switch, Immersed in Solid Nitrogen, Operating In the Temperature Range 10-30 K
- Co-author in A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Co-author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Co-author in HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
- James Michel (LANL)
- James Michel (LANL)
- Matthias Michels (KIT - Karlsruhe Institute of Technology (DE))
- Anna Mierau (GSI)
- Takeshi Mifune (Kyoto University)
- Yukio Mikami (Sumitomo Heavy Industries, Ltd.)
- Attilio Milanese (CERN)
- George Miller (NHMFL)
- G. Milluzzo (INFN-LNS)
-
Nikolay Mineev
(National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
- Co-author in Cryo-free multisection superconducting magnetic system with MgB2 coil
- Co-author in Influence of picosecond and femtosecond laser impact on magnetic and transport characteristics of the HTS tape
- Co-author in Temperature Evolution of Pinning Force in GdBaCuO Coated Conductors with Artificial Pinning Centers
- Zhong Ming (Shenzhen University)
- Qiu Ming
- Uwe Mirasch (KIT, ITEP)
- N. Mitchel (ITER IO)
- Neil Mitchell
- N. Mitchell (ITER)
- Toshiyuki Mito (National Institute for Fusion Science (NIFS))
- Iuliia Mitrofanova (JINR)
- Hitoshi Mitsubori (Sumitomo Heavy Industries, Ltd.)
- Atsuro Miura (Ashikaga Institute of Technology)
- Osuke Miura (Tokyo Met. University)
- Hideaki MIURA (Tohoku University)
- Daisuke MIYAGI (Tohoku University)
-
Daisuke Miyagi
(Tohoku University)
- Author in Development of 3 T high-temperature superconducting magnet for MRI
- Author in Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor
- Author in Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device
- Daisuke MIYAGI (Tohoku University)
- Daisuke Miyagi (Tohoku University)
-
Ryosuke Miyao
(Hokkaido University)
- Author in Simulation of Screening Current Reduction Effect of External AC Magnetic Field on Multi-turn REBCO Pancake Coils
- Author in Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model
- Author in Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench
- Katsumi Miyashita (SH Copper Producrs co., Ltd)
-
Hiroshi Miyazaki
(Toshiba Corporation)
- Author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
- Co-author in Performance of two-ply four-filaments Gd123 tape coil
- Co-author in Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors
- Jun MIYAZAKI (Tohoku University)
- Junichi Miyazawa (National Institute for Fusion Science)
- Akihisa Miyazoe (Hitachi Ltd.)
- Yoon Miyeon (Korea polytechnic university)
- Shinya Mizuno (Sophia Univ.)
- Sora Mizuochi (Sophia univ.)
- Hiroki Mochida (Sophia University, RIKEN)
- Michele Modena (CERN)
- Denis Molaro (CAEN ELS s.r.l.)
- Frédéric MOLINIE (CEA/DRF/Irfu)
-
Frederic Molinie
(DAPNIA)
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Author in Tests in Standalone Mode of the EuCARD 5.4-T REBCO Dipole Magnet.
- Co-author in ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Alexander Molodyk (SuperOx)
- Andrey Molokoedov (BINP SB RAS)
- Michael Monckenbusch (Forschungszentrum Jülich GmbH )
- Valerie Montabonnet (CERN)
- Giuseppe Montenero
- Ahn Moohyun (Center for Axion and Precision Physics Research, IBS)
- Seung-Hyun Moon (SuNAM)
- A. Moreno (Fusion for Energy)
- Luigi Morici (ENEA)
- Takaaki Morie (Sumitomo Heavy Industries, Ltd.)
- Tomohiro Morita (Mitsubishi Electric Corporation)
- Taro Morita (Sophia Uniersity)
-
Ivan Morozov
(BINP)
- Author in Fast dipole magnet development
- Anders Mortensen (Siemens Magnet Technology)
- Dennis Mosbach (ITWM)
- Takanori Motoki (Aoyama-Gakuin Univ.)
- Takanori Motoki (Aoyama Gakuin Universuty)
- Joaquim Mourao (CERN)
-
Tayebeh Mousavi
(Department of Materials, University of Oxford)
- Co-author in Lead-free persistent mode joints between NbTi wires
- Hans Mueller (GSI Darmstadt)
- Carsten Mühle (GSI Darmstadt)
- Shinichi Mukoyama (Furukawa Electric Co., Ltd.)
-
Tim Mulder
(University of Twente (NL))
- Author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Author in New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications
- Co-author in A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator
-
Javier Munilla
(CIEMAT)
- Author in Cold Tests and Magnetic Characterization of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production
- Co-author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Co-author in Magnetic and mechanical design of a 16 T common coil dipole for FCC
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Jorge Muñoz-Garcia (CEA)
- Haruyuki Murakami (National Institutes for Quantum and Radiological Science and Technology)
- Akira Murakami (Ichinoseki College)
-
Joseph F Muratore
(Brookhaven National Laboratory)
- Author in Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil.
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Masamichi Murayama (Tokyo Institute of Technology)
- T.P. Murphy (NHMFL/FSU)
-
Jaakko Samuel Murtomaki
(Tampere University of Technology (FI))
- Author in 10 kA joints for Multi-Tape HTS Cables
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Co-author in Design and Analysis of an Energy-Extraction System for High Current HTS Magnets
- Riccardo Musenich (Universita e INFN Genova (IT))
-
Andrea Musso
(CERN)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
-
Luigi Muzzi
(ENEA)
- Author in A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils
- Author in Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors
- Author in Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors
- Co-author in Design of the internal embedded joints for the EU DEMO TF coils
- Co-author in Progresses in cable in conduit for fusion magnets: from ITER to DEMO
- Oh MyeongJun (Kyungpook National University)
- Cory Myers (Ohio State University)
- Scott Myers (Lawrence Berkeley National Laboratory)
- Jin-Yong Na (Department of Electronic System Engineering)
- Toshinari Nagahiro (Mitsubishi Electric Corporation)
-
Tatsuoki Nagaishi
(Sumitomo Electric Industries, Ltd.)
- Author in Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method
- Co-author in Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet
- Co-author in Enhancement of crystallinity and critical current properties of fluorine-free MOD processed YBCO films by introduction of oxyhalide Ba2Cu3O4X2 (X = Cl, Br)
- Shigeo Nagaya (Chubu Electric Power Co., Inc.)
-
Masataka Nakahira
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Akinobu Nakai (Furukawa Electric Co., Ltd.)
-
Tatsushi Nakamoto
- Author in A Study of Irradiation Effects on Thermal Characteristics of COMET Pion Capture Solenoid
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Mio Nakamoto (National Institutes for Quantum and Radiological Science and Technology)
- Tatsushi Nakamoto (High Energy Accelerator Research Organization)
-
Kaoru Nakamura
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Kazuya Nakamura (Sophia University)
-
Takashi Nakamura
(RIKEN)
- Co-author in Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
- Co-author in Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
- Shin-ichi Nakamura (Aoyama-Gakuin Univ.)
- Taketsune Nakamura (Kyoto university)
- Taketsune Nakamura (Kyoto University)
- Taketsune Nakamura (Kyoto University)
- Taketsune Nakamura (Kyoto University)
- Koichi Nakaoka (Advanced Industrial Science and Technology)
- Takayoshi Nakashima (Sumitomo Electric Industries, Ltd.)
- P. Nalimov (St. Petersburg State Polytechnic University)
- Gi-Dong Nam (Changwon National University)
- Davide Nardelli (Columbus Superconductors)
- Keisuke Nasu (Sophia University)
- Kyohei Natsume (National Institutes for Quantum and Radiological Science and Technology)
- Aamir Nazir (Jiangsu University)
- Martina Neri (ASG Superconductor s.p.a.)
- Holger Neumann (Karlsruhe Institute of Technology)
- Antony Newborough (CERN)
- Patrick Ngotta (synchrotron SOLEIL)
- Doan Nguyen
- Quyen Nguyen (Deparment of Aerospace Engineerin, Texas A&M University)
- Doan Nguyen
- Doan Nguyen (LANL)
- Dongsheng Ni (Institute of Modern Physics Chinese Academy of Sciences)
- Thomas Nicol (Fermilab)
- Glamann Nicole (IBPT-KIT)
-
Jean-Pierre Nicolin
(LNCMI-CNRS-UPS-INSA-UGA)
- Co-author in Design and tests of the 100 T triple coil at LNCMI
-
Sylvie NICOLLET
(CEA)
- Author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in ANALYSIS OF EARLY QUENCH DEVELOPMENT IN JT-60SA TOROIDAL FIELD COILS TESTED IN THE COLD TEST FACILITY
- Co-author in Dynamical Cryodistribution Model of the JT-60SA Toroidal Field Coil in Cold Test Facility
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Jacques Nicollet (CERN)
- Rui Nie (China University of Mining & Technology)
- Rui Nie (China University of Mining and Technology)
-
Arend Nijhuis
(University of Twente)
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Author in Analysis of Minimum Quench Energy of ITER NbTi and Nb3Sn CICCs
- Author in Bending of CORC cables, Experiments and Modeling
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Effect of strand diameter, magnetic field and injection length on the current entrance length of internal tin strand
- Author in Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Pulsed field stability and AC loss of ITER NbTi PF joints by detailed quantitative modeling
- Author in Quench energy in ITER conductors for different magnetic field perturbations with JackPot and THEA combined models
- Author in Strand level modeling on AC loss and current distribution of prototype EU DEMO TF conductors
- Author in Temperature evolution in ITER CSU2 coil module during 15MA plasma scenario
- Co-author in Conductor Performance of Nb3Sn Sample for CFETR CSMC coil
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Dmitry Nikiforov (Russia, Joint Institute for Nuclear Research)
- Martin Nikolo (St. Louis University)
- Emelie Kristina Nilsson (CERN)
- Feipeng Ning (IHEP,CAS)
- Akira Ninomiya (meiji university)
- Akira Ninomiya (Meiji university)
- Akira Ninomiya (Meiji University)
- Yoshihiko Ninoya (National Institute for Quantum and Radiological Science and Technology)
- Gen Nishijima (National Institute for Materials Science)
- Yuhei Nishimiya (Kyushu University)
- Takashi Nishimura (Sumitomo Electric Industries, Ltd.)
-
Masao Nishino
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
-
Ryohei Nishino
(Kyoto University)
- Co-author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
- Co-author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
- Tatsuki Nishio (Tohoku University)
- Rongmei Niu (NHMFL - FSU)
-
Rongmei niu
(National High Magnetic Field Lab.)
- Author in Zylon aging and light resistance
- Erwu Niu
- Rongmei Niu
- Etam Noah Messomo (Geneva university)
- Fred Nobrega (Fermilab)
- Koji Noda (National Institute of Radiological Sciences)
- Shohei Noda (Kyushu University)
- Mathias Noe (Karlsruhe Institute of Technology)
- Jerzy Nogiec (Fermilab)
-
So Noguchi
(Hokkaido University)
- Author in A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils
- Author in Electrical Field Generation by Hall Effect in High Field No-Insulation REBCO Pancake Coils
- Author in Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape
- Author in Simulation of Screening Current Reduction Effect of External AC Magnetic Field on Multi-turn REBCO Pancake Coils
- Author in Thermal and Electromagnetic Simulation of Multi-stacked No-Insulation REBCO Pancake Coils on Normal-state Transition by PEEC model
- Author in Unbalanced Torque in High Magnetic Field No-Insulation REBCO Pancake Magnet after Quench
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Takashi Noguchi (National Institute for Materials Science)
- Kazuhiro Nomoto (Mitsubishi Electric)
- Shinichi Nomura (Meiji University)
- Shinichi Nomura (meiji university)
- Shunji Nomura (Toshiba Corporation)
- Shinichi Nomura (Meiji University)
- Shinichi Nomura (Meiji university)
- Ryouta Nomura (Okayama University)
- Gabriella Norcia (ASG Superconductors S.p.A.)
- Kazuki Norimoto (Sophia University)
- Alexander Nosov
- Jacques Noudem (CRISMAT-CNRS/UNICAEN-ENSICAEN)
- Michael Novikov (NRC Kurchatov Institute)
-
Igor Novitski
(FERMILAB)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Design Studies of High-Field Nb3Sn Dipoles for a post-LHC pp Collider
- Co-author in FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Patrick Noyes (NHMFL)
- P.D. Noyes (NHMFL/FSU)
- Jonathan Noys (Siemens Healthineers)
-
François Nunio
(CEA-IRFU)
- Author in High definition 3D finite element analysis of low temperature Rutherford cable
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Marc Nusbaum (GE Power)
- Tetsuhiro Obana (National Institute for Fusion Science)
- Diego Obradors Campos (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Jun Ogawa (Niigata University)
- Jun Ogawa (Niigata University)
-
Tomoya Ogawa
(Niigata University)
- Co-author in AC loss distribution in two-layer HTS twisted cable
-
Toru Ogitsu
- Author in A Study of Irradiation Effects on Thermal Characteristics of COMET Pion Capture Solenoid
- Author in Development of the Mineral Insulated High Temperature Superconducting Magnet for Future High Intensity Muon Beamline
- Co-author in Characteristics of an HTS dipole magnet
- Co-author in Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
-
Hidetoshi Oguro
(Tokai University)
- Author in Changes of superconducting properties due to the unidirectional tensile deformation on bronze-processed Nb3Sn multifilamentary wires using various Cu-Sn-Zn ternary alloy matrices
- Author in Strain characteristics of Ic in brass laminated GdBCO CC tapes under various temperature and magnetic field conditions
- Co-author in Nb-rod-method Cu-Nb/Nb3Sn wires for practical React-and-Wind applications
- Ye Jun Oh (Hanyang University)
- Sangjun Oh (NFRI)
- Yong-Seung Oh (Hanyang University)
- Dong Keun Oh (NFRI)
- Yong-Seung Oh (Dept. of Electronic Systems Engineering, Hanyang Univ)
- Y. K. Oh (NFRI)
-
Hirokatsu Ohata
(KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Kotaro Ohki (SEI)
- Norihito Ohuchi (KEK)
- Tetsuo Oka (Niigata University)
-
Tetsuo Oka
(Niigata University)
- Co-author in AC loss distribution in two-layer HTS twisted cable
- Tetsuo Oka (Niigata University)
- Kota Okabe (JAEA/J-PARC)
- Naoki OKADA (KEK)
-
Ryutaro Okada
(KEK)
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Tatsunori Okada (HFLSM, IMR, Tohoku University)
- Naoki Okada (KEK)
- Tomoyuki Okada
- Soichiro Oki (Kyushu University)
- Ivan Okunev (BINP SB RAS)
- Haruyoshi OKUSA (Okayama University)
- John Oldfield (ITER IO)
- Mikhail Omelyanenko (Joint Institute for Nuclear Research)
- Taiki Onji (Railway Technical Research Institute)
- Ryohei Ono (Niigata University)
- Yuta Onodera (Kyushu University)
- Hiroshi Ookubo
- Synsuke Oomura (Kyushu University)
- Tomofumi Orikasa (Toshiba Corporation)
- Charles Orozco (FNAL)
- Darryl Orris (FNAL)
- Rafal Ortwein (CERN)
- Goro Osabe (Sumitomo Electric Industries, LTD)
- Kozo Osamura (Research Institute for Applied Sciences)
- Maxim Osipov (NRNU MEPhI)
- Syunsuke Otake (Mitsubishi Electric Corporation)
- Yasumi Otani (Toshiba Corporation)
- Simon Otten (ITEP, KIT)
- Alexander Otto (Solid Material Solutions, LLC)
- Jing Ou (ETI-HEV)
- Zheng Rong Ouyang (CHMFL)
- LianHua OuYang (Shanghai Institute of Applied Physics, Chinese Academy of Scie)
- LianHua OuYang (Shanghai Institute of Applied Physics, Chinese Academy of Scie)
- Masayoshi Oya (Mitsubishi Electric Corporation)
-
Yavuz Oz
(NHMFL)
- Co-author in High Field Coil Technology with Bi-2212 Round Wire
- Hidemasa Ozeki (National Institutes for Quantum and Radiological Science and Te)
- Yuichi Ozone (Waseda University)
- Antonio Paccalini (INFN Sezione di Milano (INFN))
- Tom Page (Unknown)
-
Thomas Painter
(Magnet Science & Technology-NHMFL)
- Author in Design, Construction and Operation of a 13 T 52 mm No-Insulation REBCO Insert for a 20 T All-Superconducting User Magnet
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Co-author in Construction and test of the NHMFL 32 T superconducting magnet
- Co-author in Electromagnetic Quench Propagation and Self-Protecting Behavior of a Stack of No-Insulation REBCO Double-Pancake Coils
- Co-author in Overview of Recent Progress in No-Insulation REBCO Magnet Research
-
Helder Filipe Pais Da Silva
(CERN)
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system
- Author in Magnet System for the BabyMIND Neutrino Detector at J-PARC
- Co-author in Superconducting Detector Magnets for CERN’s Future Circular Collider
- Mirosław Pajor (West Pomeranian University of Technology (PL))
- Sastry Pamidi (The Florida State University)
- XF Pan
-
Heng Pan
(LBNL)
- Author in Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids
- Co-author in Analysis of the Training Behaviour of the MICE Spectrometer Solenoid
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Xifeng Pan (Western Superconducting Technologies Co. Ltd.(WST))
- Wei Pan (Jiangsu University)
- Yinnian Pan
- Bozhidar Ivanov Panev (CERN)
- Anatoly Panin (Forschungszentrum Juelich GmbH)
- Chen Panpan
- Chen Panpan
-
Andres Pantoja
(Victoria University of Wellington)
- Author in Frequency ramping effects on a dynamo-type HTS flux pump
- Author in Optimising rotor speed and design for an externally-mounted HTS dynamo
- Co-author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Co-author in Impact of stator ring width on output of a dynamo-type HTS flux pump
- Co-author in Temperature dependent behaviour of a barrel-type HTS dynamo
- Victor Pantsyrny (Bochvar Institute)
- Parthena Stefania Papadopoulou (University of Crete (GR))
- Yannis Papaphilippou (CERN)
- Dimitrios Papathanasiou (Ampulz)
-
Michael Parizh
(GE Global Research)
- Author in Conductor for MRI magnets beyond NbTi
-
Dongkeun Park
(MIT)
- Author in A Field-Shaking System to Eliminate the Screening-Current Field in the 800-MHz HTS Insert of the MIT 1.3-GHz LTS/HTS NMR Magnet: A Small-Model Study
- Author in A Tabletop Liquid-Helium-Free, Persistent-Mode 1.5-T/70-mm MgB2 Osteoporosis MRI: Two Magnet Design Options
- Author in Analytical Method to Evaluate the Manufacturing Tolerance and the Ferromagnetic Shim-ability of a 400-MHz HTS NMR Magnet.
- Author in Construction and Test Results of Coils 2 and 3 of a 3-Nested-Coil 800-MHz REBCO Insert for the MIT 1.3-GHz LTS/HTS NMR Magnet
- Author in HTS Shim Coils Energized by a Flux Pump for the MIT 1.3-GHz LTS/HTS NMR magnet: Design, Construction, and Results of a Proof-of-Concept Prototype
-
Gyeong-Jae Park
(Sungkyunkwan Univeristy)
- Author in Characteristic Analysis of Permanent Magnet Synchronous Machine Considering Combination of Time Harmonics
- Author in Optimal desing of PMa-synRM for electric propulsion system considering wide operation range and demagnetization
- Co-author in Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region
- Gui Yeol Park (Hyundai Wia)
- Minwon Park (Chagnwon National Univerisity)
- Young Gun Park (Yonsei University)
- Cheol-Hoon Park
- Eui-Jong Park (Chosun University)
- K. R. Park (NFRI)
-
NOA PARK
(Chosun University)
- Author in Analysis of Interruption Characteristics According to Application Position of Inductor-Combined Superconducting DC Fault Current Limiter
- Author in Analysis of the coupling factor according to diameter of superconducting transmitting and receiving coils
- Author in Characteristic analysis of SFCL DC interrupting system in Windfarm
- Author in Characteristics of SWPT according to the number of transmitting and receiver coils.
- Jung Woo Park (Hyundai Wia)
-
Minwon Park
(Changwon National University)
- Author in A method of critical current measurement for HTS tape using pulsed current
- Author in A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Author in Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
- Author in Design and structural analysis of induction type coilgun system
- Author in Development of a low temperature superconducting magnet with MgB2 wire for a 10 kW DC induction furnace
- Author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Co-author in Investigation of Design Considerations for an Electromagnetic Induction Coilgun System
- Heecheol Park (Changwon National University)
- Eui-Jong Park (Chosun University)
- Sunghyuk Park (Samsung Electronics)
- H. K. Park (NFRI)
- Kwang Myung Park (JH Engineering Corp.)
- Cheol-Hoon Park
- Jeff Parrell (Oxford Superconducting Technology)
- Stefano Pasini (Forschungszentrum Jülich GmbH )
- Raphael Pasquet (Sigmaphi)
- Raphaël Pasquet (Sigmaphi)
- Jay Patel
- Decool Patrick (ITER Organization)
- Philippe Pattarozzi
- Stephan Paul (Physik Department - Technische Universitaet Muen)
- Anton Pavlenko (BINP SB RAS)
- Alain Payn (Centre d'Etudes de Saclay (CEA-Saclay))
- Robert Pearce (ITER Organization)
- Danilo Felice Pedrini (INFN Sezione di Milano (INFN))
- Xiaoze Pei (University of Bath)
- Ton Peijnenburg (VDL Enabling Technologies Group)
- Antonio Pellecchia (ASG Superconductors)
- Luigi Pellegrino (INFN - National Institute for Nuclear Physics)
- NARCIS PELLICER (FUSION FOR ENERGY)
- N. Pellicer (Fusion for Energy)
-
Mickael Pelloux
(LNCMI-EMFL-CNRS)
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Bertrand PELUSO (CEA)
- Stephen Pemberton (CERN)
- Roberto Penco
-
Christophe Penel
(European Synchrotron Radiation Facility)
- Co-author in Permanent Magnet Dipoles For the ESRF Upgrade
- Quanling Peng (IHEP,CAS)
-
Tao Peng
(Wuhan National High Magnetic Field Center)
- Author in A Modularon-PCB-boardhigh voltage capacitor bank charger
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design and Preliminary Test Results of the 60T Pulsed High Magnetic Field Facility at Xi'an Jiaotong University
- Author in Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life
- Author in Development of the 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Co-author in Fatigue failure analysis of a 60T pusled magnet at the WHMFC
- Co-author in Modeling and Analysis of Parasitic Capacitance of High-Frequency High-Voltage Transformer Using Finite-Element Method
- Co-author in Size effect on the strength of Cu-Ag microcomposites by accumulative drawing and bundling process
- Xuan Peng (Hyper Tech Research Inc.)
- Fu peng (Asipp)
- Jos Perenboom (Radboud University Nijmegen - High Field Magnet Laboratory)
-
Jos Perenboom
(Radboud University Nijmegen - High Field Magnet Laboratory)
- Co-author in A novel clamping method for resistive magnets
-
Juan Carlos Perez
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Quench Propagation Velocity and Hot Spot Temperature assessments in Nb3Sn Racetrack Model Coils using analytical and Finite Element Modelling approaches
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Co-author in Applied metrology in the production of superconducting model magnets for particle accelerators
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Ana Teresa Perez Fontenla (CERN)
- Antonio Perin (CERN)
- Chhon Pes (CEA Saclay)
- chhon pes (CEA)
- Paolo Pesenti (ASG Superconductors)
- G. Petringa (INFN-LNS)
- Carlo Petrone (CERN)
-
Alexander Petrov
(DESY)
- Author in Fast dipole magnet development
- Valery Petrykin (SuperOx Japan LLC)
- Sinhoi Phang (Robinson Research Institute)
- renzhong piao (riken)
- Renzhong Piao (RIKEN)
- Roland Piccin
- Rüdiger Picker (TRIUMF)
- Zbigniew Piec (General Atomics)
- Federica Pierro (Tufts University)
- Testoni Pietro (Fusion for Energy)
- Pawel Pietrzak (AGH University of Science and Technology (PL))
- Roman Pilipenko (FNAL)
- Pavel Piminov (Budker Institute of Nuclear Physics (RU))
-
Francois-Olivier Pincot
(CERN)
- Author in Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Zhang Pingxiang (Northwest Institute for Nonferrous Metal Research)
- J. Pipek (INFN-LNS)
- Nikolay Piskunov (P.N. Lebedev Physical Institute of the Russian Academy of Sciences)
- Mirko Pojer (CERN)
- Sergei Pokrovskii (National Research Nuclear University MEPhI)
- Sergei Pokrovskii (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
-
Valery Pokrovsky
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Brian Pollack (Northwestern University (US))
- Gian Mario Polli (ENEA)
- Demosthenis Polyzos (University of Patras)
- L. Poncet (Fusion for Energy)
- LIONEL PONCET (FUSION FOR ENERGY)
- Ian PONG (LBNL)
- Xavier Pons (CERN)
- Donald Pooke (HTS-110)
- Yuri Popov (Budker Intstitute of Nuclear Physics)
- Oleg Popov (JSC “NPO GELIYMASH”)
- Amaury PORHIEL (Sigmaphi)
- Alfredo Portone (Fusion For Energy)
- Alfredo Portone (Fusion for Energy, F4E)
- Cornelius Post (Lambda Engineering)
- Liudmila Potanina (Russian Scientific R&D Cable Institute (JSC VNIIKP))
-
Robert Potts
(GA)
- Co-author in Performance of the ITER CS joints
- M. Potye
-
James Powell
(NHMFL-FSU)
- Co-author in 32T Protection Design and Operation
- Marc Pozzobon (CERN)
- subrata pradhan (Institute for Plasma Research)
- Burkhard Prause (President & CEO Bruker EST, Inc.)
-
Soren Prestemon
(LBNL)
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Author in Real-time functional diagnostics of superconducting magnets using acoustic techniques
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Analysis of the Training Behaviour of the MICE Spectrometer Solenoid
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Co-author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Co-author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Co-author in Thermo-Magnetic Mechanical stability study of the MICE Spectrometer Solenoids
- Soren Prestemon (Lawrence Berkeley National Laboratory)
- Alan Preuss (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Herve Prin (CERN)
- Rosario Principe (CERN)
-
Marco Prioli
(CERN)
- Author in Coupling of Mechanical and Magneto-Thermal Models of Superconducting Magnet by Means of Mesh Based Interpolation
- Co-author in Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
-
Matthias Probst
(KIT - Karlsruhe Institute of Technology (DE))
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
- Christophe Prud'homme (IRMA Strasbourg)
- Vadim Ptitsyn (Brookhaven National Laboratory)
- Pierre Pugnat (Lab. des Champs Magnet. Intenses (FR))
- Ainhoa Pujana (TECNALIA)
- Dariusz Pulikowski (Szczecin University (PL))
-
Niels Pyka
(GSI Darmstadt)
- Co-author in Magnetic Septa for the SIS100 Accelerator at FAIR
- Xiong Qi
- maofei qian (Shanghai Institute of Applied Physics, Chinese Academy of Scien)
- Hangyu Qian (Southwest Jiaotong University)
-
Jinggang Qin
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Mechanical properties of ITER CICC jacket in China
- Author in Recent progress in development of high performance CICCs for CFETR magnet
- Co-author in Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire
- Xing Qin (Western Superconducting Technologies Co. Ltd.)
- Huadong Qin (Lanzhou University)
- Jinggang QIN
- Bin Qin (Huazhong University of Science and Technology)
- Jinggang QIN (ASIPP)
-
Yuemei Qin
(Jiangsu university)
- Author in Direct Control of Bearingless Permanent Magnet Slice Motor Based on Flux Linkage Observer Using Phase-locked Loop
- Author in Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection
- Author in Optimization Design of Bearingless Synchronous Reluctance Motor
- Author in Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model
- Jingang Qin
- BIn Qin (HUST)
- Hua Qing (ITER Organization)
- Xu Qingjin
-
Derong Qiu
(Shanghai Jiao Tong University)
- Author in Comparison of HTS Quench detection methods based on Spontaneous Raman and Rayleigh Scattering in Optical Fibers
- Author in Field Stabilization Method of the Persistent Current Mode Coil Made of 2G HTS tape at 77 K
- Author in Test of a Prototype Inductive Superconducting Fault Current Limiter Using No-insulation Coil
- Co-author in Design and Performance Study of a 1 MW Induction Heater with HTS DC magnet
- Co-author in Study on the Quench Protection of the HTS magnet with iron core for a 1MW DC Induction Heater
- Li Qiu
- Li Qiu
- Li Qiu
- Lei Qiu
- Li Qiu
- ming Qiu (China electric power research institute)
- Qingquan Qiu (Applied Superconductivity Key Lab, Institute of Electrical Engineering, CAS, Being, 100190, China 2University of Chinese Academy of Sciences, Beijing, 100190, China and University of Chinese Academy of Sciences, Beijing, 100190, China)
- Qingquan Qiu (Institute of Electrical Engineering, Chinese Academy of Science)
- Ronghai Qu (Huazhong University of Science and Technology)
- TIMING QU (Tsinghua University )
-
Ronghai Qu
(School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
- Author in Design and Analysis of a Novel Large Mover Slot Opening Flux-Reversal Linear Permanent Magnet Machine with HTS Bulks
- Author in Design of a Novel Double-Stator Flux Reversal Machine with Hybrid HTS and PM Excitations
- Co-author in A Synthetic Frozen Permeability Method to Separate PM torque in Hybrid Permanent Magnet Variable-Flux Machine
- Co-author in Analysis and application of discrete Halbach magnet array with unequal arc lengths and unequally-changed magnetization directions
- Co-author in High Efficiency Permanent Magnet Linear Synchronous Motor
- Co-author in Research on MgB2 armature windings in fully superconducting AC machine
- Timing Qu
-
Huu Luong Quach
(Jeju National University)
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Comparative Analysis of Electromagnetic Characteristics for HTS Motor Considering PWM Schemes in Voltage Source Inverter
- Co-author in Thermal Quench Characteristics of 2G HTS Race Track Field Coil with Kapton Polyimide Insulation and Smart Insulation Materials
- Mauro Quadrio (INFN Milano - LASA)
- Federico Quagliata (ICAS)
- Li Quan (Jiangsu university)
- Li Quan (Jiangsu University)
-
Lionel Quettier
(CEA Saclay)
- Author in Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Co-author in Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
- Co-author in Preliminary design of the FAIR Super FRS superferric branched dipoles
- Steffen Quilitzsch (Forschungszentrum Jülich GmbH)
- Kyle Radcliff (National High Magnetic Field Laboratory)
-
David RAMAUGE
(Sigmaphi)
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
- Co-author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Qingxiang Ran (Institute of Plasma Physics, Chinese Academy of Sciences)
-
Emmanuele Ravaioli
(LBNL)
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Author in LEDET-ANSYS coupled modeling of transients in superconducting magnets
- Author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Two-layer 16 Tesla cosθ dipole design based on MQXF Low-Beta Quadrupoles
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in Improved Modeling of Canted-Cosine-Theta Magnets
- Co-author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Sylvain Ravat (CERN)
- Harsha Ravindra (Florida State University, Tallahassee, U.S.A)
- Travis Reagan (US ITER Project)
- Luigi Reccia (Fusion for Energy)
- Birgit Rehmer (Federal Laboratory for Materials Research (BAM))
- Sven Reiche (Paul Scherrer Institute)
- Wayne Reiersen (US ITER Project)
-
Wayne Reiersen
(PPPL/ORNL)
- Co-author in Performance of the ITER CS joints
- Peter Rem (Delft University)
- Tieqiang Ren
-
Li Ren
(Huazhong University of Science and Technology)
- Author in Design and verification test of a flux-coupling type superconducting fault current limiter
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Author in Numerical Simulation of Thermal Behavior In a No-insulation Toroidal Magnet
- Author in Simulation and Experiment of HTS Coils with a New Structure as Inductors in STRETCH Meat Grinder Circuit
- Co-author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
-
Tieqiang Ren
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet
- Yu Ren (Southwest Jiaotong University)
- Li Ren
- Li Ren
- Christiaan Reurslag (University of Twente)
- Hugo Reymond
- Matthew Reynolds (Lawrence Berkeley National Laboratory)
- SEHYUN RHYU (Korea Electronics Technology Institute)
-
Pier Luigi Ribani
(University of Bologna, Italy)
- Author in Analysis of losses in superconducting magnets based on the Nb3Sn Rutherford cable configuration for future gantries
- Author in Experimental and numerical investigation on losses in electrodynamic transients in a Nb3Sn prototype race-track coil
- Author in Modeling of AC losses in the CS and TF conductors for the ITER Project
- Anna Chiara Ricchiuto (Bologna University)
- Anna Chiara Ricchiuto (University of Bologna, Italy)
- Alessandro Ricci (INFN Genova)
- Donald Richardson
- Maria Lorena Richiusa (Fusion for Energy)
- Thomas Richter (Karlsruhe Institute of Technology (KIT))
-
Jean-Michel Rifflet
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Riccardo Righetti (ICAS Scrl)
- Riccardo Righetti (ICAS S.c.r.l)
- Matt Rindfleisch (Hyper Tech Research)
- Wagner Robert (ANL)
-
Marabotto Roberto
(ASG Superconductors)
- Co-author in ENLARGED BORE 11.74T MAGNET FOR BRAIN RESEARCH APPLICATION
- Co-author in MgB2 superconductive short winding joints: mathematical prevision of current behaviours and experimental validations
- Co-author in OPTIMIZATION, DESIGN AND OPERATION ASSESSMENT OF A MULTIPURPOSE DETECTOR FOR NICA COLLIDER
- Thomas Robillard (CEA Sacaly)
- Selanna Roccella (ENEA)
-
Etienne Rochepault
(CERN)
- Author in 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Author in Parametric Study of Block-coil Dipoles Using Graded Conductors
- Co-author in Assembly of the Nb3Sn dipole magnet FRESCA2
- Co-author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- JACOB ROCHESTER (The Ohio State University)
- Igor Rodin (Efremov Institute)
- Igor Rodin (JSC "NIIEFA")
-
Felix Rodriguez Mateos
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Design and Manufacturing of the First Industrial-Grade CLIQ Units for the Protection of Superconducting Magnets for the High-Luminosity LHC Project at CERN
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Co-author in Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Víctor Manuel Rodríguez Zermeño (Karlsruhe Institute of Technology)
- Gabriella Rolando (CERN)
- Gabriella Rolando (CERN)
- F. Romano (INFN-LNS)
- Ivan Romera Ramirez (CERN)
- Francoise Rondeaux (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
-
Paolo Rossi
(ENEA)
- Co-author in [Invited] JT-60SA Magnet System Status
-
Lucio Rossi
(CERN)
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Paolo Rossi (ENEA FSN)
- Peter Rottländer (GSI Darmstadt)
- Christian-Eric Roux (GSI)
- Marco Roveta (Criotec Impianti)
- Guido Roveta (Criotec Impianti)
- Alexander Ruban
- Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
- Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
- Ge Rui (IHEP,CAS)
- Thomas Rummel (Max-Planck-Institute for Plasma Physics)
-
Martin Rupich
(American Superconductor Corporation)
- Co-author in Self-monitoring, SMART REBCO coated conductors
- Stephan Russenschuck (CERN)
- A. D. Russo (INFN-LNS)
- Alexander Rutt (Bruker HTS)
-
Janne Ruuskanen
(Tampere University of Technology)
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Janne Ruuskanen (Tampere University of Technology)
- Janne Ruuskanen (TUT)
- Alexander Ryazanov (NRC Kurchatov Institute)
-
Alexander Rybakov
(P.N. Lebedev Physical Institute of the Russian Academy of Sciences)
- Author in MRI scanner development in Russia
- Co-author in Performance test of 1.5 T cryogen free orthopedic MRI magnet
-
J. Rysti
(CERN)
- Co-author in Study of a Sextupole Round Coil Superferric Magnet
- Lucia Sabbatini (INFN-LNF)
-
GianLuca Sabbi
(LBNL)
- Author in 3D mechanical design and analysis of 20-T twin-aperture common-coil accelerator dipole magnet
- Author in Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Superconducting Magnets for High Performance ECR Ion Sources
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Co-author in Coupled electro-magnetic, thermal, mechanical analysis of a quench in the high luminosity LHC Nb3Sn quadrupole magnet
- Co-author in LEDET-ANSYS coupled modeling of transients in superconducting magnets
- Co-author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Co-author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Oscar Sacristan De Frutos (CERN)
- David Saez de Jauregui (IBPT-KIT)
- Akio Sagara (National Institute for Fusion Science)
- Masato Sagawa (Intermetallics CO.,LTD.)
- Shintaro Sagawa (Kyushu University)
- Pranab Saha (JAEA/J-PARC)
- Toru Saito (QST)
- Ayumu Saitoh (Yamagata University)
- Kaori Sakaguchi (QST)
- Yuta Sakamaki (meiji university)
- Hisaki Sakamoto (Furukawa Electric Co., Ltd.)
- Kuniaki Sakamoto (Department of Electronic System Engineering)
- Takeru Sakurai (QST)
- Philippe Sala (LNCMI)
- Zaher Salman (PSI)
-
Tiina-Mari Salmi
(Tampere University of Technology, Finland)
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Co-author in Magnet quench protection of the FCC-hh 16 T block-type dipole magnet by means of quench absorption coils
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Tiina Salmi (Lawrence Berkeley National Laboratory)
- Giorgio Salvitti (ASG Superconductors)
- Sergey Samoilenkov (SuperOx)
- William Sampson (Brookhaven National Laboratory)
- C. Sanelli
- C. Sanelli
- stephane sanfilippo (Paul Scherrer Institut)
- Park Sang Ho (Korea polytechnic university)
- PARK SANGYONG (KOREA)
- Santiago Sanz
- Xabier Sarasola (EPFL - SPC)
- Gustavo Sarmiento (TECNALIA)
-
Kenichi Sasaki
(KEK)
- Author in A Study of Irradiation Effects on Thermal Characteristics of COMET Pion Capture Solenoid
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- yuichiro Sasamori (Fujielectric)
-
Srivatsan Sathyamurthy
(American Superconductor Corporatio)
- Co-author in Self-monitoring, SMART REBCO coated conductors
- Naoyuki Sato (ITER Organization)
- Takumi Sato (Aoyama Gakuin Universuty)
- Takao Sato (Niigata University)
- Seiki Sato (Kyushu University)
- Yoichi Sato (High Energy Accelerator Research Organization)
- Fukui Satoshi (Niigata University)
-
Akhdiyor Sattarov
(Texas A&M University)
- Author in Cable-in-Conduit Dipoles for the Ion Ring of JLEIC
- Author in High-field dipoles using superconducting cable-in-conduit
- Author in Stealth superconducting magnet technology for collider IR and injector requirements
- Author in Walk-Through MRI: Affordable Technology for Well-Patient Cancer Screening
-
Frederic Savary
(CERN)
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
- Author in Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment
- Author in Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Co-author in Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Laura Savoldi (Politecnico di Torino)
- Carlo Sborchia
- Ronald Scanlan (Particle Beam Lasers, Inc.)
-
Christian Scheuerlein
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Friction-coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K
- Author in Thermomechanical behavior of the HL-LHC 11 tesla Nb3Sn magnet coil constituents during reaction heat treatment
- Author in Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
- Co-author in Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression
- Jeffery Schiano (Penn State)
-
Thierry Schild
(CEA)
- Author in Auxiliary equipment commissioning of the 11.7 T MRI Iseult magnet
- Author in Manufacturing Completion of the Iseult/INUMAC Whole Body 11.7 T MRI System
- Co-author in A device for characterizing the circumferential strain dependence of the critical current in MgB$_{2}$ wires and tapes
- Co-author in Iseult-Neurospin 1500 A Currents Leads: Conceptual and Experimental Results
- Co-author in Quench propagation measurements on 2 km MgB2 coil up to 4 T.
- Francesco Schillaci (Institute of Physics Czech Academy of Science, ELI-Beamlines)
- Katja Schladitz
-
Jesse Schmalzle
(Brookhaven National Laboratory)
- Author in High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Construction and Testing of Curved ReBCO Coils
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Rudiger Schmidt (CERN)
- Michael Henry Schmitt (Northwestern University (US))
- Hans Schneider-Muntau (CS&T)
- Karl Schoder (Florida State University, Tallahassee, U.S.A)
-
Daniel Schoerling
(CERN)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Co-author in 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Co-author in Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression
- Co-author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Co-author in FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Sebastian Schöps (Technische Universität Darmstadt)
- Wolfgang Schreyer (Technische Universitaet Muenchen)
-
Justin Schwartz
(NC State University)
- Author in Mechanisms to enhance stability, post-quench recovery and availability in non-insulated REBCO magnets
- Co-author in Effects of metallic coatings on the thermal sensitivity of optical fiber sensors at cryogenic sensors
- Co-author in Quench detection via Rayleigh backscattering interrogated optical fibers
- Co-author in Self-monitoring, SMART REBCO coated conductors
- Michel Schweitzer
- loris scola (loris.scola@cea.fr)
- V. Scuderi (Eli-Beamlines and INFN-LNS)
- Federico Scurti (NCSU)
- Kamil Sedlak (Paul Scherrer Institut, Switzerland)
- Kamil Sedlak (University of Oxford)
- Michel Segreti (CEA/Saclay)
- Michela Semeraro (Universitat Ramon Llull (ES))
- Luigi Semeraro (Fusion for Energy)
- Yannis Kyriakos Semertzidis (Institute for basic Science (KR))
- Carmine Senatore (University of Geneva)
- Achim Sendner (Babcock Noell GmbH )
- G. Sensolini
- G. Sensolini
- SangHyeok Seo (SungKyunKwan University)
-
Sung-Won Seo
(Chungnam National University)
- Author in Characteristic Analysis and Experimental Verification for a Double-sided Permanent Magnet Linear Synchronous Generator According to Magnetization Array
- Author in Characteristic Analysis for the Influence of Auxiliary Teeth and Notching on the Reduction of the Detent Force of a Permanent Magnet Linear Synchronous Generator
- Co-author in Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole
- Co-author in Capability improvement design method considering eddy current loss reduction of axial-flux permanent magnet coupling with Halbach array structure using 3-D FEM.
-
Myung-Ki Seo
(Sungkyunkwan University)
- Author in Design strategy of interior permanent magnet synchronous motor for maintaining torque performance at flux weakening region
- Author in Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
- Co-author in Electromagnetic Performances and Noise Analysis of IPMSM according to the Control Method under Flux-Weakening Region
- Jihoon Seok (Changwon National University)
- Kichul Seong (Korea Electrotechnology Research Institute)
- Jarmo Seppälä (Luvata Pori Oy)
- Massimo Seri (Tratos Cavi)
- Lee Seyeon (Korea polytechnic university)
- Stefano Sgobba (CERN)
- Mikhail Shandov (Joint Institute for Nuclear Research)
- Wang Shanming
- Sergey Shavkin (NRC "Kurchatov Institute")
-
Peter Shcherbakov
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Andrey Shemchuk (Joint Institute for Nuclear Research)
- Boyang Shen (University of Cambridge)
- yang shen (Naval University of Engineering)
- Tengming Shen (Fermilab)
- Jie Sheng (University of Bath)
- Jiang Shengqian
- Ben Shepherd (STFC)
-
William Sheppard
(NHMFL-FSU)
- Co-author in 32T Protection Design and Operation
- Co-author in Construction and test of the NHMFL 32 T superconducting magnet
- Jing Shi
- Long Shi (Shenyang University of Technology)
- Jiangtao Shi (Huazhong University of Science and Technology)
- Yi SHI
- Chaojie Shi (Huazhong University of Science and Technology)
- Yunhua Shi (University of Cambridge)
- Yigong Shi (Western Superconducting Technologies, Co. Ltd.)
- Yigong Shi (Western Superconducting Technologies Co. Ltd.)
- Jing Shi (Huazhong University of Science and Technology)
- Lei SHI (CHMFL)
- Seong Yeub Shim (GSI)
- Ryuichi Shimada
- Hitoshi Shimizu (Furukawa Electric Co., Ltd.)
- Tatsuya Shimizu (National Institutes for Quantum and Radiological Science and Technology)
- Kentaro Shimomura (Sophia University)
-
Jun-ichi Shimoyama
(Aoyama Gakuin University)
- Author in Critical Current Properties of Precisely Cation Composition Controlled RE123 Melt-Solidified Bulks
- Co-author in Enhancement of crystallinity and critical current properties of fluorine-free MOD processed YBCO films by introduction of oxyhalide Ba2Cu3O4X2 (X = Cl, Br)
- Co-author in Fabrication of grain aligned Bi2223 thick films with high critical current properties
-
Kang Hwang Shin
(SuNAM Co., Ltd.)
- Author in Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Duck Woong Shin (Hyundai Wia)
- Hyung-Seop Shin (Andong National University)
- Iksang Shin (Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
-
Hyun-Kyung Shin
(University of Ulsan)
- Author in A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Co-author in Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
- Co-author in Design and thermal analysis of an HTS module coil for a 12 MW wind power generator
-
Kyung-Hun Shin
(Chungnam National University)
- Author in Analytical Calculation for Rotor Eddy-Current Losses in Permanent Magnet machine
- Author in Analytical Investigation of the On-load Electromagnetic Performance of Magnetic-Geared Permanent-Magnet Machines
- Author in Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Permanent Magnet Linear Synchronous Machines with Horizontally Magnetized Permanent Magnets accounting for Flux-Passing Iron Pole
- Author in Core Loss Calculation of Permanent Magnet Machines Using Analytical Method
- Co-author in Analysis of Torque Characteristics according to Gear ratio of Coaxial Magnetic Gear
- Co-author in Measurement and Torque Calculation of Magnetic Spur Gear Based on Quasi 3-D Analytical Method
- Iksang Shin (Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
- Takakazu Shintomi (KEK)
- Tsuyoshi Shinzato (Sumitomo Electric Industries, Ltd.)
- Yasuyuki Shirai (Kyoto University)
- Masashi Shirakata (High Energy Accelerator Research Organization)
-
Leonid Shirshov
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Eiji Shizuya (Sumitomo Electric Industries, Ltd.)
- Yokoyama Shoichi
- Hayato Shoji (Sophia University)
- Rao Shuangquan
- Serguei Sidorov (Paul Scherrer Institute)
-
Andrzej Siemko
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Resistance of splices in the LHC Main Superconducting Magnet Circuits at 1.9 K
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Design, Assembly and Use of a Device to Eliminate Earth Faults Caused by Foreign Metallic Debris in the LHC Main Dipole Circuit
- Vincent SIGALO (Sigmaphi)
- J. Silva Ribeiro (CNIM)
- Kideok Sim (Korea Electrotechnology Research Institute)
- Kideok Sim (Korea Electrotechnology Research Institute)
- Kihong Sim (Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
-
Damien SIMON
(CEA)
- Co-author in Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Realization and commissioning of WAVE Neutrons a Wide Aperture Vector Magnet for Neutron scattering experiments delivered Turn Key
- Fabrice Simon
- Fabrice Simon (ITER Organization)
- F. Simon (ITER)
- Michael Simpkins (Siemens Healthineers)
- Armand SINANNA (CEA France)
- John Singleton (National High Field Magnet Lab, Los Alamos )
- Frédéric Sirois (Polytechnique Montréal)
- GUO SIYU (Kyoto University)
-
Pavel Slabodchikov
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Bruce Sloan (Sumitomo (SHI) Cryogenics of America Inc.)
-
David Smekens
(CERN)
- Author in Frequency domain Diagnosis Methods for Quality Assessment of Nb3Sn coil Insulation systems and impedance measurement
- Co-author in Design and construction of the first full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN
- Co-author in Multi-scale approach to the mechanical behaviour of epoxy impregnated Nb3Sn Dipole Coils for the 11T Dipole.
-
John Smith
(General Atomics)
- Author in Manufacture of the ITER Central Solenoid components
- Co-author in Performance of the ITER CS joints
- Alexander Smith (Univeristy of Manchester)
- Kevin Smith
-
Yusuke Sogabe
(Kyoto University)
- Author in Comparison between AC loss measurements and analyses in coil assemblies with different geometries and conductors
- Author in Design of a cosine-theta dipole magnet considering influence of shielding-current-induced field on field quality
- Author in Effect of striating coated conductors on reducing shielding-current-induced fields in pancake coils exposed to normal magnetic fields
- Co-author in Application of hierarchical matrices to large-scale electromagnetic field analyses of coils wound with coated conductors
- Co-author in Influence of E-J characteristics of coated conductors and field ramp-up rates on the shielding-current-induced fields of magnets
- Myung-Hwan Sohn (Korea Electrotechnology Research Institute)
- Matteo Solfaroli Camillocci (CERN)
- Helmut Soltner (Forschungszentrum Jülich GmbH)
-
Hyun Hee Son
(Department of Materials Science and Engineering, Korea University)
- Author in A Study on Thermal and Electrical Stabilities of GdBCO Coils Impregnated with Epoxy Composites Using Surface-Treated Carbon Nanotube Fillers
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in A Study on Thermal and Electrical Characteristic of Metallic Cladding GdBCO Coil
- Co-author in Design Options of a 3-T 900-mm Whole Body MRI Magnet with Selected Commercial MgB2 Wires
- Wenjuan Song (School of Electrical Engineering, Beijing Jiaotong University)
- Myung-Geun Song (Hanwha Defense System)
- Naihao Song (IEE, CAS)
- Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences)
- Yuntao Song
-
Jung-Bin Song
(Department of Materials Science and Engineering, Korea University)
- Author in Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
- Co-author in A Study on Post-Quench Behaviors of No-insulation HTS Magnet under Over-Current Conditions
- Co-author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- Seunghyun Song (Electrical and Electronic Engineering, Yonsei University)
- Jun-Young Song (School of Electronic and Electrical Engineering, Sungkyunkwan University)
- Ziqiang Song (Wuhan National High Magnetic Field Center, State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology)
-
massimo sorbi
(Milan University & INFN-LASA)
- Author in A fast 10 kA current switch for High Temperature Superconductor accelerator magnets
- Author in Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
- Co-author in Conceptual design of a 16 T cosθ bending dipole for the Future Circular Collider
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Study of a Sextupole Round Coil Superferric Magnet
- Marco Spagnolo (EnginSoft S.p.A)
- Jonathan David Speed (CERN)
-
Susannah Speller
(Department of Materials, University of Oxford)
- Co-author in Lead-free persistent mode joints between NbTi wires
-
Peter Spiller
(GSI Darmstadt)
- Co-author in Magnetic Septa for the SIS100 Accelerator at FAIR
- Francesco Stacchi (University of Udine, Bologna)
- Krzysztof Stachon (CERN)
- Andrzej Stafiniak
- Michael Staines (Robinson Research Institute, Victoria University of Wellington)
- Andrey Starikov (Joinr Institute for Nuclear Research)
- Marco Statera (INFN Milano - LASA)
- Jens Steckert (CERN)
- Jochen Steinmann (Babcock Noell GmbH )
-
Antti Aleksis Stenvall
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Open Material Property Library With Native Simulation Tool Integrations (OpMaST)
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Design and Analysis of an Energy-Extraction System for High Current HTS Magnets
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Vadim Stepanov
- Dmitry Stepanov (JSC "NIIEFA")
- Boris Stepanov (EPFL - SPC)
- Boris Stepanov
-
Alan Stephens
(GA)
- Co-author in Performance of the ITER CS joints
- Mischa Steurer (Florida State University, Tallahassee, U.S.A)
-
Eric Stiers
(NHMFL-FSU)
- Co-author in 32T Protection Design and Operation
- Rainer Stoepler
- James Storey (Victoria University of Wellington)
- Mikael Balto Storkersen (Bergen University College (NO))
-
Stoyan Stoynev
(FNAL (US))
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Location in the LARP MQXFS1 prototype
- Weston Straka (NC State University)
-
Thomas Strauss
(Fermilab)
- Author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Author in Quench Location in the LARP MQXFS1 prototype
- Author in The Mu2e Solenoid Cold Mass Position Monitor System
- Co-author in Hall probe Calibration System Design for the Mu2e Solenoid Field Mapping System
- Co-author in Mu2e Solenoid Field Mapping System Design
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Nick Strickland (Victoria University of Wellington)
-
Wilfried Sturm
(GSI Darmstadt)
- Co-author in Magnetic Septa for the SIS100 Accelerator at FAIR
- Yu Suetomi (RIKEN)
- Shota Suga (Sophia University )
-
Mamoru Sugai
(Niigata University)
- Co-author in AC loss distribution in two-layer HTS twisted cable
-
Michinaka Sugano
- Author in Development of the Mineral Insulated High Temperature Superconducting Magnet for Future High Intensity Muon Beamline
- Author in Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade
- Author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Shigekatsu SUGAWARA (KEK)
- Masahiro Sugimoto (Furukawa Electric Co., Ltd.)
- Hiroyuki Sugino
-
Mike Sumption
(The Ohio State University)
- Author in Advanced tube type Nb3Sn conductor and its applications in Hyper Tech
- Author in Conductor for MRI magnets beyond NbTi
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
- Author in Influence of field cycle and applied current on coated conductor magentization and decay for accelerator applications
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Single-strand excitation for examining current sharing and ICR in cored and non-cored Nb3Sn Rutherford Cable at 4.2 K up to 12 Tesla
- Co-author in An Experimental Stability Diagram for ReBCO Roebel Cables at 4.2 K and Applied Fields up to 12 T
- Co-author in FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Co-author in Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Co-author in YBCO pancake coil wound using an electrically non insulated tape: current sharing, stability, quench, and NZP measured at 4.2 K and 10 T
- Quqin Sun
- Jiuce Sun (KIT)
- Taiqiang Sun (Huazhong University of Science and Technology)
- Xiaoxuan Sun (Wuhan National High Magnetic Field Center, State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology)
- Jinshui Sun (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Meng Sun (China University of Mining and Technology)
- Sen Sun (SINAP, CAS)
-
Eric SUN
(Jefferson Lab)
- Author in Comparison of Measured and Simulated Quench Behaviors of Superconducting Magnets for Jefferson Lab’s 11 GeV Super High Momentum Spectrometer
- Author in Design, manufacturing and testing of a unique coil collaring system for the Jefferson lab’s large superconducting magnets SHMS Dipole and Q2Q3 quadrupoles
- Co-author in Commissioning of the Superconducting Magnets for the SHMS Spectrometer at Jefferson Lab
- Qixing Sun
- Ying Sun (Hebei University of Technology)
- Peng Sun (Shenyang University of Technology )
- Wanshuo Sun (Institute of Electrical Engineering, Chinese Academy of Sciences)
-
Liangting Sun
(Institute of Modern Physics, Chinese Academy of Sciences )
- Author in Development of SECRAL II superconducting magnet
- Author in Superconducting Magnets for High Performance ECR Ion Sources
- Co-author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
-
Hae-Jin Sung
(Changwon Nationnal University)
- Author in A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Author in Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
- Author in Design and thermal analysis of an HTS module coil for a 12 MW wind power generator
- Author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Lee Sung-Ho (Korea Institute of Industrial Technology)
- Michael Surin (NRC Kurchatov Institute)
- Bart-Jan Sustronk
-
Tomone Suwa
(National Institutes for Quantum and Radiological Science and Technology)
- Author in Evaluation of thermal strain induced on components of Nb3Sn strand during cool down
- Author in Irreversible strain characteristics of technical RHQT Nb3Al superconductors
- Author in Study of bending behavior in Nb3Sn strands
- Co-author in Prediction and analysis of quench propagation test results in the ITER TF Insert Coil using the 4C code
- Co-author in Tcs Measurement Result of ITER Toroidal Field Insert Coil Tested in 2016
-
Takumi Suzuki
(Kyushu University)
- Author in Current Capacity of Cu-sheathed Multi-filamentary Coated Conductors under the Influence of Spatial Variation of Local Critical Currents in Each Filament
- Author in Enhancement of in-field critical current density of BaZrO3 added (Y, Gd)BCO coated conductors by reduced once-coat-layer-thickness in multi-coating TFA-MOD method
- Author in In-field Characterization of Local Ic and n-indices as a Function of Longitudinal Coordinate in a Long-length GdBCO Coated Conductor
- Hiroshi Suzuki (Japan Atomic Energy Agency)
-
Kento Suzuki
(High Energy Accelerator Research Organization)
- Author in Characteristics of an HTS dipole magnet
- Author in Development of the Mineral Insulated High Temperature Superconducting Magnet for Future High Intensity Muon Beamline
- Author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Design study of an HTS magnet with REBCO coils for heavy ion beam-line experiments
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Magnetic Design Update of Large Aperture Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- James Swanson (Lawrence Berkeley National Laboratory)
- Vasily Sychugov (Kurchatov Institute)
- Cosmore Sylvester (FNAL)
- Sergey Sytchevsky (JSC "NIIEFA")
-
Veniamin Sytnik
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Piotr Szwangruber (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Wurui Ta (Lanzhou University)
- Kenta Tadakuma (Kyushu University)
- Suguru Takada (National Institute for Fusion Science)
- Akira Takagi (Furukawa Electric Co., Ltd.)
- Masato Takahashi (RIKEN)
- Keita Takahashi (Iwate University)
- Kohki Takahashi (Tohoku University)
- Yoshikazu Takahashi (National Institutes for Quantum and Radiological Science and Technology)
- Naoto Takahashi (KEK)
- Keita Takahashi (Iwate University)
- Kazuya Takahata (National Institute for Fusion Science)
- Taro Takano (Sophia University )
- Katsutoshi Takano (QST)
-
Tomoaki Takao
(Sophia University)
- Author in Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method
- Author in Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device
- Author in Influence of high thermal conduction plastic having negative thermal expansion property on cooling performance in conduction cooled HTS coils
- Co-author in Development of a REBCO innermost coil for a persistent 400 MHz (9.39 T) LTS/REBCO NMR magnet
- Co-author in Evaluation of Voltage between Conductors for Resonance Phenomenon and Transient Response in JT-60SA Central Solenoid
- Co-author in Quench protection of HTS coil composed of multiple pancake-coils by changing current distribution in pancake-coils
- Co-author in Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil
- Kikuchi Takashi
- Shigeki Takayama (Toshiba Corporation)
- Teruou Takayama (Yamagata University)
- Tomohiro Takayanagi (JAEA/J-PARC)
- Yasuaki Takeda (The University of Tokyo)
- Souichirou Takeda
- Kazuyuki Takeda (Kyoto University)
- Richard Talaga (ANL)
- Kentaro TAMI (Okayama University)
- Hitoshi Tamura (National Institute for Fusion Science)
- Katsuhito Tamura (Kyushu university)
- Ping Tan (Huazhong University of Science and Technology)
- Hajime Tanabe (Mitsubishi Electric Corporation)
- Teruya Tanaka (National Institute for Fusion Science)
- Ken-ichi Tanaka (KEK)
- Kenichi Tanaka (KEK)
-
Nobuhiko Tanaka
(QST)
- Co-author in Progress of ITER TF Coil Case fabrication in Japan
- Yuki Tanaka (Sophia University )
- JunJie Tang (Southwest Jiaotong University)
- Hongtao Tang
-
Yuejin Tang
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Author in Numerical Simulation of Thermal Behavior In a No-insulation Toroidal Magnet
- Author in Simulation and Experiment of HTS Coils with a New Structure as Inductors in STRETCH Meat Grinder Circuit
- Co-author in A Digital Electrometric Method for Measuring the AC loss of a HTS Coil
- Co-author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
-
Jingyu Tang
(Institute of High Energy Physics, CAS)
- Co-author in Prototype Design of the Dipole for EMuS at CSNS
- NORIO TANI (Japan Atomic Enerygy Agency)
- Hiroyasu Taniguchi (Osaka Alloying Works Co.Ltd)
-
Ahmed TAOUFIK
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
- S. Tarrago (Fusion for Energy)
- Michael Tartaglia (Fermilab)
-
Kenji Tasaki
(Toshiba Corporation)
- Co-author in Characteristics of an HTS dipole magnet
- O. Tasset-Maye (Sigmaphi Accelerator Technology)
- Sandra Tavares (CERN)
- John Teah (Siemens Healthineers)
-
Herman Ten Kate
(CERN)
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in Development of conductors for thin solenoids for ultra radiation-transparent detector magnets
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Author in Magnet System for the BabyMIND Neutrino Detector at J-PARC
- Author in New Bridge Temperature Sensor for Superconducting Magnets and other Cryogenic Applications
- Author in Operational experience with the combined solenoid/dipole magnet system of the COMPASS Experiment at CERN
- Author in Superconducting Detector Magnets for CERN’s Future Circular Collider
- Co-author in A 2.5 T, 1.25 m free bore superconducting magnet for the Magnum-PSI linear plasma generator
- Co-author in A Superconducting Magnetic Density Separation Laboratory Demonstrator
- Co-author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Co-author in Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation
- Co-author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Co-author in FCC-hh Detector Magnet Cryostats and Cold Mass Suspension system
- Co-author in Self-heating effect in HTS coils
-
Herman ten kate
- Co-author in Quench protection of an MgB2-based MDS magnet system
- Akio Terashima (High Energy Accelerator Research Organization, KEK)
- Yoshiro Terazaki (National Institute for Fusion Science)
-
Toshihisa Terazawa
(IMRA MATERIAL R&D Co., Ltd.)
- Co-author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
- Co-author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
-
Marcel ter Brake
(University of Twente)
- Co-author in A Superconducting Magnetic Density Separation Laboratory Demonstrator
- Co-author in Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation
- Co-author in Quench protection of an MgB2-based MDS magnet system
- Co-author in Self-heating effect in HTS coils
- Jeroen Ter Harmsel (Twente Technical University (NL))
- Franco Terzi (ASG Superconductors)
- Matsuda Tetsuya
-
Joachim Theiner
(CAEN ELS s.r.l.)
- Co-author in A novel digital magnet power supply approach
- Eckhard Theisen (Babcock Noell GmbH )
-
Adrian Thomas
(Siemens Magnet Technology)
- Co-author in Lead-free persistent mode joints between NbTi wires
- E. Thyssen (BNG)
- Alexei Timofeev (National Research Nuclear University MEPhI (NRNU MEPHI))
-
Ahmed TIRBIYINE
- Co-author in Pinning Force and critical properties in YBa2Cu3O7-δ
- Ion Tiseanu (INFLPR, Bucharest)
- Pascal Tixador (Grenoble-INP)
-
Leonid Tkachenko
(Institute for High Energy Physics)
- Co-author in Fast Cycling Superconducting Quadrupole
- Jean-Philippe Tock (CERN)
- Maurizio Todero (INFN Milano - LASA)
-
Ezio Todesco
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Development of a short model of the superconducting separation dipoles D2 for the High Luminosity Upgrade of LHC
- Author in Fabrication of the 7.2 m long coils for the prototype of MQXFB, the Nb3Sn low-b quadrupole magnet for the Hi-LHC
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Co-author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Field Measurement to evaluate iron saturation and coil end effects in the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Influence of 3D effects on field quality in the straight part of accelerator magnets for the High Luminosity Large Hadron Collider
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Performance of the quench protection system of the first LARP-CERN quadrupole magnet models
- Co-author in Quench Protection Heater Study with the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Co-author in Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Co-author in Training Performance with Increased Coil Pre-stress of the 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade
- Raimund Toelle (Forschungszentrum Juelich)
- Valerio Tomarchio (Fusion For Energy (F4E))
- Giordano Tomassetti (ENEA)
- Naoki Tominaga (Kyoto University)
- Akira Tomioka (Fuji Electric)
- Masaru Tomita (Railway Technical Research Institute)
- Takahiro Tomitsuka (meiji university)
- Łukasz Tomków (Wrocław University of Technology)
-
Davide Tommasini
(CERN)
- Author in Status of the 16 T dipole development programme for a future hadron collider
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Author in Windability tests of Nb3Sn Rutherford cables for HL-LHC and FCC
- Co-author in 3D Magnetic and Mechanical Design of Coil Ends for the Racetrack Model Magnet RMM
- Co-author in Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression
- Co-author in FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator
-
Michael Tomsic
(Hyper Tech Research Inc.)
- Author in Advanced tube type Nb3Sn conductor and its applications in Hyper Tech
- Author in Demonstration of a Wind and React MgB2 Solenoidal Coil Segment for MRI Applications
- Author in Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
- Co-author in FEM Modelling Studies of 3 T Cryogen Free MRI Magnet based on MgB2 conductor
- Co-author in Stability and Normal Zone Propagation in a conduction cooled racetrack coil wound of YBCO Coated Conductor Tape – FEM Modeling
- Yujin Tong (Lanzhou University)
- Jean-Marc Tonnerre (Institut Néel)
- Frédéric Topin (Aix Marseille Université)
- Vince Toplosky (NHMFL - FSU)
- Vince Toplosky
-
Fernando Toral
(Centro de Investigaciones Energéti cas Medioambientales y Tecno)
- Author in Cold Tests and Magnetic Characterization of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production
- Author in Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
- Author in Magnetic and mechanical design of a 16 T common coil dipole for FCC
- Co-author in Design of a dipole with longitudinally variable field using permanent magnets for CLIC damping rings
- Co-author in Development of MQYY: a 90 mm NbTi double-aperture quadrupole magnet for HL-LHC
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Lynette Torez (Department of Mechanical Engineering, University of New Mexico)
-
Alexandre Torre
(CEA)
- Author in Completion of the French JT-60SA Toroïdal Field Magnet Contribution
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Okubo Toru (Sophia univ.)
-
Taizo Tosaka
(Toshiba Corporation)
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Co-author in Racetrack-shaped large single pancake coils wound with 1 km-long REBCO-coated conductors
- Jack Toth (National High Magnetic Field Laboratory (NHMFL))
- Jean-christian Toussaint (CEA Saclay)
- Robert TOUZERY (CEA France)
- Dejan Trbojevic (Brookhaven National Laboratory)
- Frederic Trillaud (Universidad Nacional Autónoma de México)
- Parth Tripathi (Forschungszentrum Jülich GmbH)
- Stephane Triquet (CERN)
-
Ulf P. Trociewitz
(NHMFL-FSU)
- Author in Design of a Magnet Bore Field Mapper Consisting of a Cylindrically Fixed Array of Inexpensive Hall Elements to Probe Low-Order Spherical Harmonics in Real Time
- Author in High Field Coil Technology with Bi-2212 Round Wire
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Co-author in Multiphysics FEA Led Design of Bi-2212 Round Wire Prototype Coils
- Stanislaw Trojanowski (Institute of Low Temperature and Structure Research)
- Vladimir Tronza (ITER IO)
- Matteo Tropeano (Columbus Superconductors Spa)
- Matteo Tropeano (Columbus Superconductors, SpA)
- Christophe Trophime (LNCMI - CNRS)
-
Christophe Trophime
(CNRS)
- Co-author in Ultimate Forces of the Grenoble Hybrid Magnet
- Grigory Trubnikov (JINR)
- Karl-Heinz TRumm
- Anastasia Tsapleva (Bochvar Institute)
- Nicholaos Tsoupas (Brookhaven National Laboratory)
- Hirokazu Tsubouchi (Furukawa Electric Co., Ltd.)
- Kiyosumi Tsuchiya (KEK)
-
Katsuhiko Tsuchiya
(National Institutes for Quantum and Radiological Science and Technology)
- Co-author in [Invited] JT-60SA Magnet System Status
- Co-author in Vacuum Pressure Impregnation for Central Solenoid of JT-60SA
-
Makoto TSUDA
(Tohoku University)
- Author in Estimation method of optimal amount of overshooting current for temporally uniform magnetic field in a conduction-cooled ReBCO coil for MRI applications
- Author in Influence of bolt positions and electrode structure in Yoroi-coil structure on stress distribution in an HTS coil winding
- Author in Influence of local critical current degradation on quench characteristics of a ReBCO coil
-
Makoto Tsuda
(Tohoku University)
- Author in Development of 3 T high-temperature superconducting magnet for MRI
- Author in Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor
- Author in Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device
- Shunji Tsuji-Iio
- Daiki Tsujino (Kyushu University)
- Kenichi Tsukada (Mayekawa MFG Co.Ltd)
- Osami Tsukamoto (Sophia University)
-
Daigo Tsuru
(National Institutes for Quantum and Radiological Science and Technology)
- Co-author in [Invited] JT-60SA Magnet System Status
- Takehisa Tsurudome (Sumitomo Heavy Industries, Ltd.)
- Hiroshi Tsutsui (Sumitomo Heavy Industries, Ltd.)
- Hiroaki Tsutsui
- B. Turck (ITER)
- Melanie Turenne (Babcock Noell GmbH)
- Daniel Turi (Hungarian Academy of Sciences (HU))
- Marcos Turqueti (Lawrence Berkeley National Laboratory)
- Daniele Turrioni (Fermilab)
-
Simonetta Turtu'
(ENEA/ICAS)
- Author in Lessons learnt by manufacturing 100 km of varied type of Cable-in-Conduit-Conductors
- Author in Structural optimization methodology of the 2-D inner-leg cross-section for the Toroidal Field Coils of fusion reactors
- Co-author in Design of the internal embedded joints for the EU DEMO TF coils
- Oyunjargal Tuvdensuren (Changwon National Univerisy)
- Andrew Twin
- Andrew Twin (Oxford Instruments)
- Yuriy Tysyachnykh (P.N. Lebedev Physical Institute of the Russian Academy of Sciences)
- Nir Tzabar (Ariel University)
- Mio Uchida (Sophia University)
- Vadim Udut (JSC “NPO GELIYMASH”)
-
Hiroshi Ueda
(Okayama University)
- Author in A Facile Method to Estimate Screening Current-Induced Fields in REBCO Pancake Coils
- Author in Characteristics of current bypassing and transient stability in partial insulation HTS coils
- Author in Design and technical development of a high-resolution 1.3 GHz NMR magnet
- Author in Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape
- Author in Reduction effect of irregular magnetic field due to screening-current in copper-plated mutifilamentary REBCO tape
- Co-author in AC loss evaluation of a 10T class small REBCO coil with conduction-cooled configuration
- Co-author in Development of HTS bulk NMR relaxometry with ring-shaped iron rings
- Co-author in Magnetic field homogeneity and stability of a conduction-cooled REBCO MRI magnet with a room-temperature bore of 396 mm
- Toru Ueki (Meiji University)
- Toru Ueki (Meiji university)
- Tomoaki Ueno (JAEA/J-PARC)
- Takeshi Ueno (Sophia University)
- Ryota Uetsuki (Sumitomo Electric Industries, Ltd.)
-
Davide Uglietti
- Author in A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils
- Author in DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field
- Author in Progresses in cable in conduit for fusion magnets: from ITER to DEMO
- Author in Stacked tape HTS conductors for Fusion Magnets
-
UNKNOWN UNKNOWN
- Co-author in Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
- Co-author in Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
- UNKNOWN UNKNOWN
- UNKNOWN UNKNOWN
- UNKNOWN UNKNOWN
- UNKNOWN UNKNOWN
- UNKNOWN UNKNOWN
-
UNKNOWN UNKNOWN
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Yasuhiro Uno (National Institutes for Quantum and Radiological Science and Technology)
- Shinichi Urayama (Kyoto University)
- Alexander Usoskin
- Alexander Usoskin (Bruker HTS GmbH)
- Tatsuro Uto (Toshiba Corporation)
- Carlo Uva (INFN Milano - LASA)
- Anvar V A (University Of Twente)
- P. Valente
- P. Valente
- Giovanni Valesi (ASG superconductors SpA)
-
Roser Vallcorba
(CEA - Saclay)
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Co-author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- N. Valle (ASG)
- Nicolò Valle (ASG Superconductors s.p.a.)
- Mathieu Valleau (Synchrotron SOLEIL)
- Cynthia VALLERAND (Linear Accelerator Laboratory)
- Jean-Claude Vallet (CEA)
-
Giorgio Vallone
(CERN)
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in Mechanical Analysis of the Short Model Magnets for the Nb3Sn Low-Beta Quadrupole MQXF
- Author in Mechanical Design Analysis of MQXFB, the 7.2 m Long Low-β Quadrupole for the Hi-Luminosity LHC Upgrade
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
-
Srinivas Vanapalli
(University of Twente)
- Author in Test title
-
Danko van der Laan
(Advanced Conductor Technologies)
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Author in Bending of CORC cables, Experiments and Modeling
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Development of round flexible HTS CORC® wires for fault current limiting applications
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Co-author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Co-author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Ruud van der Woude (Senior Project Engineer )
- Hans van Eck (Dutch Institute for Fundamental Energy Research (DIFFER))
- Lou van Lieshout
- A. Vannozzi
- A. Vannozzi
-
Jeroen Van Nugteren
- Author in [Invited] The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps
- Author in A novel method for greatly reduced edge effects design in CCT magnets
- Author in Conductor Cost Optimized Idealized Dipole Cross-Sections for Accelerator Applications
- Author in Design Study of a Novel, LHC High-Lumi CCT Orbit Corrector.
- Author in E3SPreSSO: A Quench Protection System for High-Field High-Temperature Superconducting Magnets
- Author in Hi-Lumi LHC Twin Aperture Orbit Correctors Magnet Assembly & Cold Test
- Author in HTS Accelerator Magnet Dipole Assembly and Cold Test by CERN for EuCARD2
- Author in Investigation of the Roebel cable geometry and current homogeneity over lengths relevant to accelerator-type demonstrator magnet.
- Author in Open Material Property Library With Native Simulation Tool Integrations (OpMaST)
- Co-author in 10 kA joints for Multi-Tape HTS Cables
- Co-author in Design and Analysis of an Energy-Extraction System for High Current HTS Magnets
- Co-author in Quench Behaviour of the HL-LHC Twin Aperture Orbit Correctors
-
Jos van Velsen
(Radboud University Nijmegen - High Field Magnet Laboratory)
- Co-author in A novel clamping method for resistive magnets
- Rob Van Weelderen (CERN)
- Cristina Vazquez (Ciemat)
- Pierre Vedrine (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR))
- Marc Veigel (ETI-HEV,KIT)
- Gueorgui Velev (FNAL)
- Giorgio Vercelli
- Gerardo Veredas (Fusion For Energy)
-
Mario Verrecchia
(Fusion for Energy)
- Co-author in [Invited] JT-60SA Magnet System Status
- Jose Veteran (Synchrotron SOLEIL)
- Laura Vida-Zaragozá (CIEMAT)
- E. Viladiu (Fusion for Energy)
- L.N.P. Vilela
-
Benjamin Vincent
(CNRS-LNCMI, Grenoble, France)
- Co-author in Ultimate Forces of the Grenoble Hybrid Magnet
- Co-author in Upgrade of the Grenoble High Magnetic Field Facility
- Y.L. Viouchkov (NHMFL/FSU)
- Steve Virostek (Lawrence Berkeley Lab)
- Roman Viznichenko
- Pavel Voblyy (Budker Institute of Nuclear Physics (RU))
- John Voccio (Massachusetts Institute of Technology)
- Emmanuel Voisin (SigmaPhi)
- Adam Voran (National High Magnetic Field Laboratory)
- A.J. Voran (NHMFL/FSU)
- Anna Voronova (Bochvar Institute)
- Alexander Vostner (ITER IO)
- Vjeran Vrankovic (Paul Scherrer Institute)
-
Marco Vuolo
(ESA)
- Co-author in The limits of space radiation magnetic shielding
- Vitaly Vysotsky (Russian Scientific R&D Cable Institute)
- Udo Wagner (CERN)
- Robert Walsh (Florida State University)
- Wolfgang Walter (Babcock Noell GmbH)
- Wolfgang Walter (Babcock Noell GmbH )
- Phil Walton (Siemens Magnet Technology)
-
Peter Wanderer
- Author in Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4m Long MQXF Coil.
- Author in Design, Construction and Test of HTS/LTS Hybrid Dipole
- Author in High Field, Large Aperture HTS Solenoid for Axion Dark Matter Search
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Wei Wang (Sichuan University)
- Shaoliang Wang (Huazhong University of Science & Technology)
- Bowen Wang (Hebei University of Technology)
- Li Wang (Shanghai Institute of Applied Physics)
-
Xiaorong Wang
(Lawrence Berkeley National Laboratory)
- Author in Design and test results of the Nb3Sn Canted-Cosine-Theta dipole magnet CCT4
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Geometric field errors of Short Models for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Author in Influence of Reaction Heat Treatment Conditions on Interstrand Contact Resistances of Nb3Sn Rutherford Cables
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Co-author in Fabrication and assembly performance of the first 4.2 m MQXFA magnet and mechanical model for the Hi-Lumi LHC Upgrade
- Co-author in Finite element analysis of strain distribution of REBCO coated conductors subjected to bending conditions experienced in high-field magnet applications
- Co-author in Magnetic Measurements on the First Models of the Insertion Quadrupole MQXF for HL-LHC
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Fei Wang (China Institute of Atomic Energy)
- Xiangqi Wang (University of Science and Technology of China)
- Hao Wang (Shenyang University of Technology)
- Xiuping Wang (Shenyang Institute Of Engineering,China)
- Chunyu Wang
- Lei Wang
- Futang Wang
- Chuan Wang (China Institute of Atomic Energy)
- Chuan Wang (China Institute of Atomic Energy)
- Chao Wang
- Wei Wang
- Hongdi Wang (Southwest Jiaotong University)
-
Qiuliang Wang
- Author in A Compact Test Bed for Critical Current Evaluation on High Temperature Superconducting Tape Samples
- Author in Analysis of dynamic deformation and disturbing torque of superconducting spinning rotor
- Author in Bending-peeling method to measure interface strength of YBCO tape
- Author in Control design of a magnetic catheter navigation system for cardiac arrhythmias
- Author in Cryogenic Oscillating Heat Pipe for Conduction-cooled Superconducting Magnets
- Author in Design and Test of a superconducting levitation system for gravity measurement
- Author in Electromagnetic Design of HTS insert for NMR Magnet in Consideration of Screening Currents
- Author in Investigation of epoxy impregnated Nb3Sn superconducting coil for high field applications
- Author in Stress-Strain Analysis in a 10 T non-Insulated GdBCO HTS Coil for the 25 T All-superconducting NMR Magnet
- Lei Wang (Intitute of Electrical Engineering, Chinese Academy of Sciences)
- Chengtao Wang (IHEP,CAS)
- Yingzhe Wang (IHEP,CAS)
- Hui Wang (1Institute of Electrical Engineering, Chinese Academy of Sciences)
- Xudong Wang (High Energy Accelerator Research Organization, KEK)
- Zhen Wang (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)
-
Qingjian Wang
(Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
- Shuang Wang (Huazhong University of Science and Technology)
- Pengfei Wang (Northwest Institute for Non-ferrous Metal Research)
-
Zuoshuai Wang
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Co-author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
- Jun Wang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Xu Wang
- Zhen Wang
- Bowen Wang (Key Laboratory of Electro-Magnetic Field and Electrical Apparatus Reliability of Hebei Province)
- Yutao Wang (Shenyang University of Technology)
- Hongliang Wang (Huazhong University of Science & Technology)
- Yinshun Wang (North China Electric Power University)
-
Lei Wang
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Haitao Wang (Southeat University)
- Zhitao Wang (Southwest Jiaotong University)
- Chao Wang (Southwest Jiaotong University)
- Xiaoyong Wang (IEE, CAS)
- Zheng Wang (School of Electrical and Information Engineering, Jiangsu University)
- Jianhui Wang (Xiamen University)
- Bao-Sheng Wang (NSRRC)
- Qi Wang (Jiangsu university)
- Zuoshuai Wang (Huazhong University of Science and Technology)
- Hao Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Housheng Wang (Intitute of Electrical Engineering, Chinese Academy of Sciences)
- Deming Wang
- Jian Wang (Jiangsu University)
- Manfred Wanner (Fusion For Energy)
- david warren (Oxford Instruments)
- David Warren
- Yuki Watabe (Mitsubishi Electric)
- Tomonori Watanabe (Chubu Electric Power Co., Inc.)
- Tomonori Watanabe (Chubu.Electric.Power Co., Inc.)
- Yasuhiro Watanabe (Japan Atomic Energy Agency)
- Robert Weggel (Particle Beam Lasers, Inc.)
- Chen Wei
- Shaoqing Wei (Uiduk University)
- Sumin Wei (China Institute of Atomic Energy)
-
Hubertus Weijers
(NHMFL/FSU)
- Author in Construction and test of the NHMFL 32 T superconducting magnet
- Co-author in 32T Protection Design and Operation
- Co-author in Estimation of Losses in the (RE)BCO Two-coil Insert of the NHMFL 32 T All-superconducting Magnet
- Co-author in The latest observations from results of comprehensive computer simulation of the NHMFL all-superconducting 32T magnet quench tests
- Harald Weiss (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
- Jeremy Weiss (National High Field Magnet Lab, FSU)
- Jeremy Weiss (University of Colorado)
-
Jeremy Weiss
(Advanced Conductor Technologies)
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Author in Bending of CORC cables, Experiments and Modeling
- Author in Development and test of REBCO canted cosθ dipole coils with CORC® wires
- Author in Development of round flexible HTS CORC® wires for fault current limiting applications
- Author in High-temperature superconducting CORC® magnet cable and wire development and their application
- Co-author in Demonstration Test of Two New 80 kA@12T/4K class ReBCO CORC Cable-In-Conduit Conductors for Fusion and Detector Magnets
- Co-author in Development of 300 to 500 A/mm2 at 10T/4.2K class ReBCO-CORC Round Wires
- Klaus-Peter Weiss (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Horst Welcker
- Ling Weng (Hebei University of Technology)
- Zhao Wenxiang (Jiangsu university)
- Rainer Wesche (EPFL)
-
Sander Wessel
(University of Twente)
- Author in Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles
- Co-author in [Invited] HTS field coils with robust design for a superconducting wind turbine generator
- Co-author in Self-heating effect in HTS coils
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Jeffrey White (ANL)
- Frans Wijnen (Radboud University Nijmegen)
- Michal Wilczek
- Stefan Wilfert (GSI)
-
Stefan Wilfert
(GSI Darmstadt)
- Co-author in Magnetic Septa for the SIS100 Accelerator at FAIR
- Ian Wilkinson (Siemens)
-
Christina Will
(GSI Darmstadt)
- Co-author in Magnetic Septa for the SIS100 Accelerator at FAIR
- Erich Willen (Particle Beam Lasers, Inc.)
-
Gerard Willering
(CERN)
- Author in A Statistical Analysis of Electrical Faults in the LHC Magnets
- Author in Cold powering test results of the Nb3Sn FRESCA2 block coil magnet
- Author in Cold powering tests of the 2 meter Nb3Sn DS11T model magnets at CERN
- Author in Development of Quench Antennas for Quench Detection in Nb3Sn Magnets
- Author in Qualification of movement leading to quench in Nb3Sn coils by means of induced voltage, quench antenna and vibration measurements.
- Author in Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC
- Author in Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation
- Author in Validation of Quench Protection simulations in High-Field Nb3Sn magnets by comparison with measurements.
- Co-author in Magnetic Measurements on Short Models and Long Coil Assemblies of the 11-T dipoles for HL-LHC
- Co-author in Mechanical Analysis of the Dipole Magnet FRESCA2 During Assembly, Cool-Down and Training
- Stuart Wimbush (Victoria University of Wellington)
- Martin Winkler (GSI Darmstadt)
- Holger Witte (Brookhaven National Laboratory)
- Michael J. Wolf (Karlsruhe Institute of Technology, Institute for Technical Physics, Karlsruhe, Germany)
- Klaus Wolf (Fraunhofer Institute)
- Felix Josef Wolf (TU Bergakademie Freiberg (DE))
- Daniel Wollmann (CERN)
- JunHui Won (Hanyang Univ)
- yongseng wong (NSRRC)
- J. Wosnitza (Hochfeld-Magnetlabor Dresden (HLD-EMFL), Helmholtz-Zentrum Dresden-Rossendorf, D-01314 Dresden, Germany)
- Richard Wotherspoon
- Christina Wouters (ETH Zurich)
- Xi Wu
-
wei wu
(student)
- Author in Coil Dominated Superconducting Multiplets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) geometry
- Author in Design, fabrication and test of a 2 T superconducting dipole prototype by using tilted solenoids
- Author in Development of SECRAL II superconducting magnet
- Author in Superconducting Magnets for High Performance ECR Ion Sources
- Co-author in Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Co-author in Quench Protection of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source
- Beimin Wu (Institute of Modern Physics, Chinese Academy of Sciences )
- Wei Wu (Shanghai Jiao Tong University)
-
Xi Wu
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
-
Yuwen wu
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Jiawei Wu (Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology)
- H. Wu
- yu Wu (ASIPP, Hefei, China)
-
Yu WU
(ASIPP)
- Author in Basic Design and Progress of Central Solenoid Model Coil for CFETR
- Author in Conductor Performance of Nb3Sn Sample for CFETR CSMC coil
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Mechanical properties of aged 316LN butt-welding joint at cryogenic temperature for CFETR CS model coil
- Co-author in Winding R&D for CFETR Central Solenoid Model Coil
- Chun-Yi Wu (National Synchrotron Radiation Research Center)
- Bo Wu (Western Superconducting Technologies Co. Ltd.)
-
Wenye Wu
(Jiangsu University)
- Author in Design and analysis of a less-rare-earth PM-assisted synchronous reluctance machine considering tradeoffs of PM flux linkage and magnetic saliency
- Author in Design and analysis of an interior permanent magnet synchronous machine with multi flux barriers based on electromagnetic-mechanical coupling method
- Beimin Wu
- Chris Wulffers (Radboud University Nijmegen - High Field Magnet Laboratory)
- Sascha Wüstling (Institute for Data Processing and Electronics (IPE), Karlsruhe Institute of Technology (KIT))
- Zhong Xia (Huazhong University of Science and Technology,R&D Center of App)
- Tao Xia
- Dong Xia
-
dong XIA
(Chinese Academy of Sciences)
- Author in Design and Test of 10 kV/400 A Flux-coupling Type Superconducting Fault Current Limiting Module
- Author in Magnetic field and characteristic analysis of the superconducting fault current limiter for DC applications
- Author in Threshold value analysis of YBCO tapes under transient over-current impulse
-
Tao Xia
- Author in Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Author in Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Author in Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Co-author in A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion
- Co-author in Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear
- Liye Xiao (Institute of Electrical Engineering, Chinese Academy of Sciences)
- Houxiu Xiao (Huazhong University of Science and Technology)
- HanChen Xiao
- Liye Xiao
- CAO Xiao-ning (Hebei university of Technology)
- Daniel Xie (LBNL)
- Jianfeng Xie
- Liang Xin (Huazhong University of Science and Technology)
- Zhao Xin
-
yan xin
- Author in High Modulus Reinforcement Materials
- Jiansheng Xing (China Institute of Atomic Energy)
-
Wang Xingzhe
(Lanzhou University)
- Author in A multifunction test facility of cryogenic-electro-magneto- mechanical properties for superconducting wires/tapes under multi-fields
- Author in Dynamic strain characteristics and responds in a LTS sextupole magnet during excitation and spontaneous quench
- Author in Quench propagation and degradation limits of pre-strained HTS tapes with a spot heater
- Author in Strain response of superconducting magnets during excitation and quench training based on FBG and cryogenic strain gauge measurements
- Qi Xiong (China)
- Wei Xu (Huazhong University of Science and Technology)
- Bangduo Xu
-
Wei Xu
(Huazhong University of Science and Technology)
- Author in Improved Inner Stator-Magnet Moving-Iron Transversal-Flux Linear Oscillatory Machine with Magnets in Inner Stator Yoke
- Author in Novel Heteropolar Hybrid Radial Magnetic Bearing with Double-Layer Stator for Flywheel Energy Storage System
- Co-author in A Two-dimensional Equivalent Mode of a Homopolar Synchronous Machine
- Da Xu
- Tong Xu (China University of Mining & Technology)
-
Ying Xu
(Huazhong University of Science and Technology)
- Author in Design and verification test of a flux-coupling type superconducting fault current limiter
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Author in Numerical Simulation of Thermal Behavior In a No-insulation Toroidal Magnet
- Co-author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
- Dan-Ping Xu (School of Mechanical Engineering, Pusan National University)
- Xiaoyan Xu (Northwest Institute for Non-ferrous Metal Research)
- Liuwei Xu (Institute of Plasma Physics, Chinese Academy of Sciences)
- Qingjin XU (IHEP)
- Ying Xu
- Jieping Xu (Shanghai Institute of Applied Physics. CAS)
- Meimei Xu (Jiangsu University)
-
Yun Xu
- Author in A new three-level repetitive pulse magnetic field power supply system
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Development of Real-time Monitoring System of the 100 MVA/100 MJ Flywheel Pulse Generator System
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research on operation strategy of the pulse generator power system energizing the out coil of the 100 Tesla magnet
- Co-author in Research of a new DC breaker based on the electromagnetic forming technology for Battery power supply of long pulsed magnet
- Xingchen Xu (Fermi National Accelerator Lab)
- Yihuan Xu
- da xu
- Liu Xufeng (Institute of Plasma Physics, Chinese Academy of Sciences)
- Feng Y
- Takayuki Yachida
- Tsuyoshi Yagai (Sophia University)
- Tsuyoshi Yagai (Sophia university)
-
TSUYOSHI YAGAI
(Sophia University)
- Author in Development of Analyzing Capability of React and Wind Process based on Strand Trace and Inter-Strand Resistance Measurement System for Cable-In-Conduit Conductor
- Author in Feasibility Study of MgB2 Cable for Pancake Coil of Energy Storage Device
- Co-author in Superconducting properties of Prototype Pancake Coil using MgB2 Cable
- Konstantin Yagotintsev (University of Twente)
-
Kostyantyn Yagotyntsev
(University of Twente)
- Author in AC Loss and inter-tape resistance in various HTS cable configurations
- Author in Evolution of AC loss, inter-strand resistance and mechanical properties in prototype EU DEMO TF conductors during 30,000 load cycles
- Author in Magnetization of CORC, TWST, and Roebel Cables for HEP applications and Associated Error fields
- Co-author in Self-heating effect in HTS coils
- Kazama Yamagishi (Sophia University)
- Takahiro Yamaguchi (Sumitomo Electric Industries, Ltd.)
- Takashi Yamaguchi (SEI)
- Masanobu Yamamoto (Japan Atomic Energy Agency)
- Kazami Yamamoto (JAEA/J-PARC)
- Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)
- Atsuhiko Yamanaka (Nagoya University)
-
Minoru Yamane
(National Institutes for Quantum and Radiological Science and Technology)
- Author in Winding Deformation Caused by Reaction Heat-treatment for ITER TF coil
- Co-author in Current Center Line Measurement of ITER TF Coil
- Co-author in New inspection method of joint resistance at room temperature for ITER TF Coil
- Co-author in Series Production of ITER TF Coil Winding Pack in Japan
- Satoshi Yamano (Furukawa Electric Co., Ltd.)
- Hiroshi Yamaoka (High Energy Accelerator Research Organization)
- Kouhei Yamazaki
- Samer Yammine (CERN)
- G Yan
- Panpan Yan (Niigata University)
- Guo Yan (Western Superconducting Technologies Co.)
-
Sinian Yan
(Huazhong University of Science and Technology, China)
- Author in Design and verification test of a flux-coupling type superconducting fault current limiter
- Author in Dynamic performances analysis for HTS SMES Used in Power Grid Based on a Novel Field-Circuit Coupled Method
- Author in Excitation Effect Analysis of a Novel HTS Controllable Reactor with Orthogonally Configured Core Based on dynamic Inductance
- Author in Performance Analysis and Electromagnetic Design of a Flux-coupling type SFCL
- Wenju Yan (China University of Mining & Technology)
-
Rongge Yan
(Hebei University of Technology)
- Author in Measurement and Analysis of Amplitude Magnetic Permeability and Magnetic Losses of Silicon Steel Sheet
- Author in Vibration of Magnetically Controlled Saturated Reactor under AC and DC excitation
- Co-author in Research on Temperature Rise and Temperature Control for Giant Magnetostrictive Transducer
- Co-author in Stress Analysis of Induction Motor Core Considering Anisotropic Magnetic and Magnetostrictive Properties
- Nagato Yanagi (National Institute for Fusion Science)
-
Yousuke Yanagi
(IMRA Material R&D Co., Ltd.)
- Co-author in Numerical simulation of electromagnetic and thermal hoop stresses in REBaCuO superconducting ring and disk bulks reinforced by stainless steel ring with various thicknesses during field-cooled magnetization
- Co-author in Simulation studies of mechanical stresses and trapped field in annular REBaCuO superconducting bulk magnet for NMR spectrometer during field-cooled magnetization
- Yoshinori Yanagisawa (riken)
-
Yoshinori Yanagisawa
(RIKEN)
- Author in Current transport characteristics of a superconducting joint between REBCO conductors made by a novel method
- Author in Design and technical development of a high-resolution 1.3 GHz NMR magnet
- Author in Diffusion process of screening current in REBCO coil wound with copper-plated muti-filamentary REBCO tape
- Co-author in Measurement of persistent current Gd123 coil for superconducting joint fabricated by CJMB method
- Co-author in Remarkable difference in thermal runaway behavior between a Ni-alloy reinforced Bi-2223 coil and a REBCO coil
- Hui Yang
- Yifeng Yang
- Ye Yang (Kyushu University)
- Mei Yang
- Jing Yang (Institute of Modern Physics Chinese Acdemy of Sciences)
- Wen-Jiao Yang
- Tongjun Yang (Institute of Modern Physics, CAS)
- Jun Yang (Wuhan University)
- Sung Chae Yang (Chonbuk National University)
-
Mei Yang
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- C.M. Yang (Department of Material Science and Engineering, National Cheng Kung University)
- Xiong Yang (Shenyang University of Technology)
- Jun Yang (Huazhong University of Science and Technology)
- Wenjie Yang (Institute of modern physics, Chinese academy of sciences)
- Ping Yang (Shanghai Jiao Tong University)
- Chih-Sheng Yang (National Synchrotron Readation Research Center)
- Xinsheng Yang (Southwest Jiaotong University)
- Xiaorui Yang (Hebei University of Technology)
- Hongmin Yang (Kunsan National University)
- Jiangtao Yang (Huazhong University of Science and Technology)
- XS Yang
- Seong Eun Yang (KEPCO)
- Wenrong Yang (Hebei University of Technology)
- Jun Yang (Huazhong University of Science and Technology)
-
Qingxin Yang
(Hebei University of Technology )
- Co-author in Analysis and Optimization of Adjustable Magnetic Fluid Damper in DC Magnetic Field
- Co-author in Flow Analysis of Magnetic Fluid around a Permanent Magnet in Magnetic Fluid Damper
- Co-author in Stress Analysis of Induction Motor Core Considering Anisotropic Magnetic and Magnetostrictive Properties
- Chinkang Yang (NSRRC)
- Qinggao Yao (colleague)
- Ling Yao
- Tian Yao (Jiangsu University)
- Shirai Yasuyuki
- Chang-Qing Ye
- Caiyong Ye (Huazhong University of Science and Technology)
-
Caiyong Ye
(Huazhong University of Science and Technology)
- Author in Improved Inner Stator-Magnet Moving-Iron Transversal-Flux Linear Oscillatory Machine with Magnets in Inner Stator Yoke
- Author in Novel 4/4 Stator/Rotor Single-Phase Asymmetric Stator-Pole Doubly Salient Machine with Permanent Magnets on Stator Teeth
- Author in Novel Heteropolar Hybrid Radial Magnetic Bearing with Double-Layer Stator for Flywheel Energy Storage System
- Christopher Yeckel (Stangenes Industries)
-
Hankil Yeom
(Korea Institute of Machinery and Materials)
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
- Co-author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Li Yibo
- Yu Yijie
-
Dapeng Yin
(ASIPP)
- Co-author in Winding R&D for CFETR Central Solenoid Model Coil
- Meng Yin (China Institute of Atomic Energy)
- Meng Yin (China Institute of Atomic Energy)
- Zhiguo Yin (China Institute of Atomic Energy)
- Lixin Yin (SINAP, CAS)
- Zhiguo Yin (China Institute of Atomic Energy)
- Dapeng YIN
- Wang Yingzhe
- Wang Yixuan (Huazhong University of Science and Technology)
- Zhou Y.K.
- Daisaku Yokoe (Japan Fine Ceramics Center)
- Shoichi Yokoyama (Mitsubishi Electric Corporation)
- Kazuya Yokoyama (Ashikaga Institute of Technology)
- Shoichi YOKOYAMA (Mitsubishi Electric Corporation)
- Shoichi YOKOYAMA (Mitsubishi Electric Corporation)
- Chu Yong (National Fusion Research Institute)
- Zhao Yongqing
-
Byeong-ha Yoo
(Department of Materials Science and Engineering, Korea University, Seoul, Korea)
- Author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Co-author in Investigation on Minimum Tolerable Bending Diameters of Reacted MgB2 Monofilament Wires
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Co-author in Progress Report on Superconducting Joint Technique for the Development of MgB2 MRI magnet
- JongHee Yoo (Center for Axion and Precision Physics Research, IBS)
- Tae-Gwang Yoon
-
Sangwon Yoon
(SuNAM Co., Ltd.)
- Author in A method of critical current measurement for HTS tape using pulsed current
- Author in Design, Fabrication, and Test Results of an 18 T Metal Cladding GdBCO Magnet for Axion Detector
- Author in Development Progress of a 9.4 T 100 mm Metal-Clad No-Insulation All-REBCO High-Resolution NMR Magnet Cooled by Conduction
- Author in Feasibility Study on Mitigation of Screening Current-Induced Field in a Conduction-Cooled REBCO Magnet
- Author in Quench Behaviour of a Metallic Cladding REBCO Coil Containing Copper Strips for Outer Diameter Adjustment
- Author in Transient Behaviors of a 3T 100 mm Stainless Steel Cladding All-REBCO Magnet During Sudden Discharging
-
YONG SOO YOON
(SHIN ANSAN UNIVERSITY)
- Co-author in 3D Electromagnetic Design and Analysis of a 1-HP-Class HTS Rotating Machine integrated with a Contactless HTS Excitation Device
- Co-author in Degradation of Critical Current in an HTS Tape Considering Curvature of Elliptical Shape under Combined Bending and Torsion
- Co-author in Experimental Analysis of Charging Characteristics of an HTS Field Coil with Contactless HTS Excitation Device Considering Various HTS Loads
- Co-author in Methods to Increase the Pumping Rate of Rotary HTS Flux-pump with Rotating HTS Tape to Charge the Field Coil of the Synchronous Motor.
-
Chung Yoon Do
(Suwon Science College)
- Author in Design Considerations and Characteristics of Antenna Arrays for Wireless Power Charging System in Superconducting MAGLEV
- Author in Operating Characteristics of Underwater Wireless Power Transfer for Maritime Applications Using Strong Copper Resonance Coupling Coils
- Author in Thermal and electric analysis of the flux pump to apply conduction cooled superconducting magnet
- Jun Yoshida (Sumitomo Heavy Industries, Ltd.)
- Makoto YOSHIDA (KEK)
-
Masaaki Yoshikawa
(IMRA MATERIAL R&D Co., Ltd.)
- Co-author in AC Current Transport Characteristics of HTS Stator Coils in HTS Induction/Synchronous Motor
- Co-author in Low Speed Rotating Characteristics of 20 kW Class High Temperature Superconducting Induction/Synchronous Motor
- Co-author in Variable-voltage-variable-frequency inverter drive of 20 kW class the High-Temperature Superconducting Induction/Synchronous Motor
- Masahiro Yoshimoto (JAEA)
- Iwata Yoshiyuki (National Institute of Radiological Sciences (NIRS))
- wang youhua (hebei university of technology)
- Edward Young (University of Southampton)
- Xiaowu Yu
-
Haitao Yu
(School of Electrical Engineering, Southeast University)
- Co-author in A Field Modulated Linear Permanent Magnet Generator for Direct-Drive Wave Energy Conversion
- Co-author in Design and Analysis of a Transverse Flux Hybrid Field Modulated Linear Generator for wave energy conversion
- Co-author in Design and Analysis of Marine Current Power Generation System Based on a Magnetic Gear
- Co-author in Magnetic field distribution prediction of a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Polar transformed subdomain modeling for primary-segmented permanent magnet linear synchronous machine applied in tracked inspection robots
- Co-author in Research on a field-modulated tubular linear generator with quasi-Halbach magnetization for ocean wave energy conversion
- Co-author in Research on the linear tubular motor with multilayer flux-concentrating permanent magnets for direct-drive ocean wave conversion
- Yongji Yu
- Sikui Yu (Institute of Plasma Physics, Chinese Academy of Sciences)
- Yung-Teng Yu (National Synchrotron Radiation Research Center)
- Z Yu
-
In-Keun Yu
(Changwon National Univerisity)
- Author in A method of critical current measurement for HTS tape using pulsed current
- Author in A performance study on the flux pump based modularized exciter for a large-scale HTS wind power generator
- Author in Design and comparative analysis of MgB2 and YBCO wire-based superconducting wind power generators
- Author in Design and structural analysis of induction type coilgun system
- Author in Design and thermal analysis of an HTS module coil for a 12 MW wind power generator
- Author in Hardware integration and performance analysis of a 10 kW HTS wind power generator
- Co-author in Development of a low temperature superconducting magnet with MgB2 wire for a 10 kW DC induction furnace
- Co-author in Investigation of Design Considerations for an Electromagnetic Induction Coilgun System
-
Miao Yu
(Fermilab)
- Author in Test of the first MQXFA prototype by LARP and status of the US High Luminosity LHC Accelerator Upgrade Project preparation
- Author in Test results of the short models MQXFS3 and MQXFS5 for the HL-LHC upgrade
- Co-author in Summary of test results of MQXFS1 - the first short model 150 mm aperture Nb3Sn quadrupole for the High-Luminosity LHC upgrade
- Min Yu
- Yijie Yu
-
Siyang Yu
(Shenyang University of Technology)
- Author in Design and Operation Performance Research of Brushless Doubly-Fed Generator with Cage Bar Assisted Reluctance Rotor
- Co-author in Rotor Losses Research of Brushless Doubly-fed Machine with Hybrid Rotor
- Co-author in Rotor Structure Design and Optimization of MW-class Brushless Doubly Fed Generator for Offshore Wind Turbine
- xi Yuan (North China Electric Power University)
-
Weijia Yuan
(University of Bath)
- Co-author in Design and Initial Results of a Novel in-situ A.C. loss Measurement in Axial Flux Synchronous Machine
- Co-author in Effectiveness of Superconducting Fault Current Limiting Transformers in Power Systems
- Co-author in Quality and Stability Improvement of DC Power Systems in All Electric Ship Using SMES/Battery
- Wan Yuanxi (Institute of Plasma Physics, Chinese Academy of Sciences)
- He Yuanyuan
- Zhang Yulei
- Subok Yun (Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
-
Subok Yun
(Kiswire Advanced Technology Co., Ltd., Daejeon, Korea)
- Co-author in A Study on Draw-ability of Nb Filaments for Manufacturing Nb3Sn Strand
- Co-author in Investigation of Temporal Stability of a Persistent Current Mode Prototype MgB2 Coil
- Co-author in Investigation on Thermal and Electrical Characteristics of MgB2 Magnet Using Partial-Insulation Winding Technique
- Kiwook YUN (Kyushu university)
- Song Yuntao (Institute of Plasma Physics, Chinese Academy of Sciences)
- Hong Z.
- Jin Z.
- Sergey Zanegin
- Nikolaj Zangenberg (Danish Technological Institute)
-
Louis ZANI
(CEA)
- Author in STATUS OF CEA MAGNETS DESIGN METHODS AND TOOLS AND APPLICATION TO EU DEMO MAGNETS DESIGN
- Author in Thermohydraulic analyses on CEA concept of TF and CS coils for EU-DEMO
- Co-author in Development of a new generic analytical modeling of AC coupling losses in cable-in-conduit conductors (CICCs).
- Co-author in Numerical modelling of the quench propagation phase in the JT-60SA TF coils tested in CTF
- Co-author in PARAMETRIC ANALYSES OF JT-60SA TF COIL IN COLD TEST FACILITY WITH SUPERMAGNET CODE
- Co-author in Quench simulation of a DEMO TF coil using a quasi-3D coupling tool
- Roberto Zanino (Politecnico di Torino)
- Elena Zapretilina (Efremov Institute)
- Piec Zbigniew (General Atomics)
- Markus Zerlauth (CERN)
- Sergey Zernov (TVEL Corporation)
- Yuhu Zhai (Princeton Plasma Physics Laboratory)
- Dong Zhang (Institute of Electrical Engineering, Chinese Acadmy of Sciences)
- Suping Zhang (China Institute of Atomic Energy)
- Jing Zhang (Xiamen University)
- Y Zhang
- Tianjue Zhang (China Institute of Atomic Energy)
- Yong Zhang (Southwest Jiaotong University)
- Xiaoying Zhang (Institute of Modern Physics of Chinese Academy of Science)
- Yi Zhang (Huazhong University of Science and Technology)
- Chao Zhang (Jiangsu university)
- Xinxing Zhang (Jiangsu University)
- Ke Zhang (Western Superconducting Technologies, Co. Ltd.)
- Pingxiang Zhang (Western Superconducting Technologies, Co. Ltd.)
- HY Zhang
- Min Zhang (University of Bath)
- Pengxiang Zhang (Northwest Institute for Non-ferrous Metal Research)
- Shaozhe Zhang (Wuhan National High Magnetic Field Center,Huazhong University of Science and Technology)
- Xiangzhen Zhang
- Ke Zhang (Institute of Plasma Physics, Chinese Academy of Sciences)
- Ke Zhang (Western Superconducting Technologies Co. Ltd.)
- Pingxiang Zhang (Western Superconducting Technologies Co. Ltd.)
- Zhuo Zhang
- Z. Zhang
- junjie zhang
- Xiuchang Zhang (University of Cambridge)
- hang zhang (Huazhong University of Science and Technology)
- Guomin Zhang (Applied Superconductivity Key Lab, Institute of Electrical Engineering, CAS, Being, 100190, China 2University of Chinese Academy of Sciences, Beijing, 100190, China and University of Chinese Academy of Sciences, Beijing, 100190, China)
- Jingmin Zhang (Shanghai Institute of Applied Physics, CAS)
- Jingye Zhang (Institute of Electrical Engineering,Chinese Academy of Sciences)
- Kai Zhang (institute of high energy physics,china)
- Danlu Zhang (The Ohio State University)
- Miao Zhang (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)
- Min Zhang (University of Bath, UK)
- Wei Zhang (SINAP, CAS)
- Zhan Zhang (Massachusetts Inst. of Technology (US))
- Pingxiang Zhang (Northwestern Polytechnical University )
- Suping Zhang (China Institute of Atomic Energy)
- Guomin Zhang
- Dong Zhang
- Zhifeng Zhang (Applied Superconductivity Key Lab, Institute of Electrical Engineering, CAS, Being, 100190, China 2University of Chinese Academy of Sciences, Beijing, 100190, China and University of Chinese Academy of Sciences, Beijing, 100190, China)
- zhan zhang (Three Gorges of University of China)
- Yang Zhangwei
-
Chenyin Zhao
- Author in Decoupling Control Based on Linear/Nonlinear Active Disturbance Rejection Switching for 3 Degrees of Freedom HMB
- Author in Decoupling Control of Bearingless Permanent Magnet Synchronous Motor Using ANFIS Inverse System
- Author in Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry
- Author in FLUX-REGULATION PERFORMANCE FOR RADIAL SUSPENSION FORECES OF BEARINGLESS FLUX-SWITCHING MOTOR
- Author in Minimization design of torque ripple for bearingless synchronous reluctance motor
- Author in Optimization Design and Forecast Direct Control System Research on Bearingless Permanent Magnet Synchronous Generator
- Author in Sensorless Control of Bearingless Permanent Magnet Synchronous Motor Based on MRAS
- Author in Starting Control Strategy of Bearingless Permanent Magnet Synchronous Motor
- Wenxiang Zhao (School of Electrical and Information Engineering)
- Junjie Zhao (Tampere University of Technology, Finland)
- Yong Zhao
- Y Zhao
- Zhangfei Zhao (Huazhong University of Science and Technology)
- Zhangfei Zhao (Huazhong University of Science and Technology)
-
Zhangfei Zhao
(Wuhan National High Magnetic Field Center Huazhong University of Science and Technology)
- Author in Construction and Test of Three-coil Magnet Power Supply System for High Pulsed Magnetic Field
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Modified Design of Power Supply System for 100 Tesla Pulsed Magnetic Field
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
- Shuang Zhao
- Huyue Zhao (Argonne National Laboratory)
- Hanyu Zhao
- Wenxiang Zhao (JiangSu University)
- Anfeng Zhao (Shanghai Jiao Tong University)
- AnFeng Zhao (Shanghai Jiao Tong University)
- Zelong Zhao (Jiangsu University)
- Wenxiang Zhao (Jiangsu University)
- Zhuheng Zhao (Jiangsu University)
- Hongwei W Zhao (Institute of Modern Physics, Chinese Academy of Sciences)
- Luna Zhao (Hebei University of Technology)
- Zhao Luna Zhao Luna (Hebei University of Technology)
- Shijun Zheng (Institute of Modern Physics, Chinese Academy of Sciences )
- Jun Zheng (Southwest Jiaotong University)
- Botian Zheng (Southwest Jiaotong University)
- Wenhui Zheng
- Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)
- Yali Zheng (Luoyang Normal University)
- Jun Zheng
- Sergei Zherlitsyn (Helmholtz-Zentrum Dresden-Rossendorf)
- weibo zhong (School of Electrical Engineering, Southeast University)
- Xu Zhong (Jiangsu University of Science and Technology)
- Youhe Zhou
- Difan Zhou (University of Cambridge)
- Youhe Zhou (Lanzhou University)
-
Chao Zhou
(U)
- Author in Coupling loss in prototype CFETR CS conductors with different cable patterns, measurement and modeling
- Author in Effect of strand diameter, magnetic field and injection length on the current entrance length of internal tin strand
- Co-author in Detailed analysis of conduction-cooled MgB2 for use in superconducting magnetic density separation
- Co-author in Quench protection of an MgB2-based MDS magnet system
-
Jun Zhou
(Huazhong University of Science and Technology)
- Author in Design of a hybrid power supply for the 65 T high-stability flat-top pulsed magnetic field
- Author in Design of an active ripple compensator for the 50 T high-stability flat-top pulsed magnetic field
- Author in Improved Overall Efficacy in Transcranial Magnetic Stimulation of Human Brain with Semi - ellipse Coil Pair
- Author in Research of Active Regulation for High-Stability Flat-Top Pulsed High Magnetic Field
- Tingzhi Zhou (Institute of Plasma Physics, Chinese Academy of Sciences)
- Huawei Zhou (Jiangsu University)
- Luncai Zhou (Institute of Modern Physics)
- Wei Zhou (Beijing Jiaotong University)
- Youhe Zhou
- Youhe Zhou (Lanzhou University)
-
Jianxin Zhou
(Institute of High Energy Physics)
- Author in Status of Magnet System for CSNS RCS
- Qiaogen Zhou (SINAP, CAS)
- Zhou Jie (Hebei University of Technology)
- Z. Q. Zhu (The University of Sheffield, U.K.)
- Xuhui Zhu (Jiangsu University)
- Jian Zhu (School of Electrical and Information Engineering)
-
Jiahui Zhu
(China Electric Power Research Institute)
- Author in Characterization of an internal cooling high temperature composite superconductor with REBCO for large scale energy storage applications
- Author in Numerical Study on Electro-thermal Characteristics of Core Cable Consisted Of YBCO Coated Conductor
- Author in Performance simulation of a bias-flux superconducting fault current limiter (SFCL) based on MATLAB/SIMULINK
- Xiaoyong Zhu (Jiangsu university)
- Liancheng Zhu
- Zian Zhu (IHEP Beijing)
- Runze Zhu (Huazhong University of Science and Technology)
- Yingwei Zhu
- Xuchen Zhu (Intitute of Electrical Engineering, Chinese Academy of Sciences)
- jianguo zhu (UTS)
- Li Zhu (Institute of Modern Physics, Chinese Academy of Sciences )
-
Huangqiu Zhu
(Jiangsu university)
- Author in Decoupling Control Based on Linear/Nonlinear Active Disturbance Rejection Switching for 3 Degrees of Freedom HMB
- Author in Decoupling Control of Bearingless Permanent Magnet Synchronous Motor Using ANFIS Inverse System
- Author in Decoupling Control of Bearingless Synchronous Reluctance Motor Based on Differential Geometry
- Author in Direct Control of Bearingless Permanent Magnet Slice Motor Based on Flux Linkage Observer Using Phase-locked Loop
- Author in FLUX-REGULATION PERFORMANCE FOR RADIAL SUSPENSION FORECES OF BEARINGLESS FLUX-SWITCHING MOTOR
- Author in Minimization design of torque ripple for bearingless synchronous reluctance motor
- Author in Optimization Design and Forecast Direct Control System Research on Bearingless Permanent Magnet Synchronous Generator
- Author in Optimization Design of Bearingless Synchronous Reluctance Motor
- Author in Sensorless Control of Bearingless Permanent Magnet Synchronous Motor Based on MRAS
- Author in Soft Sensing Modeling of Rotor Displacements Based on Continuous Hidden Markov Model
- Author in Starting Control Strategy of Bearingless Permanent Magnet Synchronous Motor
- Co-author in Electromagnetic Performance Optimization Design of 5-phase BPMSM Based on Third Harmonic Injection
- Lihua Zhu (Tianjin Polytechnic University)
- Yingshun Zhu (Institute of High Energy Physics,Chinese Academy of Sciences)
-
Xiaoyong Zhu
(Jiangsu University)
- Author in Design and analysis of a less-rare-earth PM-assisted synchronous reluctance machine considering tradeoffs of PM flux linkage and magnetic saliency
- Author in Design and analysis of an interior permanent magnet synchronous machine with multi flux barriers based on electromagnetic-mechanical coupling method
- Author in Electromagnetic Performance Analysis of Less-rare-earth Stator-partitioned Multi-excitation Flux-switching Machine Considering Multi-operation Conditions
- Xuhui Zhu (School of Electrical and Information Engineering, Jiangsu University)
- Guang Zhu
- Binbin Zhu
- shuangjiang zhuang (Naval University of Engineering)
- Zhu Zian
- Thomas Zickler (CERN)
-
Alexander Zlobin
(Fermilab)
- Author in Design and fabrication of a 15 T Nb3Sn accelerator dipole demonstrator
- Author in Design Studies of High-Field Nb3Sn Dipoles for a post-LHC pp Collider
- Author in Development of Nb3Sn strands and Rutherford Cables for 16 T Accelerators Magnets
- Co-author in FEA Model and Mechanical Analysis of the Nb3Sn 15 T Dipole Demonstrator
- Co-author in Measurements of Persistent Current Effects in FNAL 11 T Nb3Sn Dipole Models
- Co-author in Status of the 16 T dipole development programme for a future hadron collider
- Lorenzo Zoboli (ENEA)
- Konstantin Zolotarev (Budker INP)
- Zhanguo ZONG (High Energy Accelerator Research Organization)
- Tianjie Zou
- Vasily Zubko (Russian Scientific R&D Cable Institute)
- Vitaly Zuev (BINP)
- Walter Zunnebeld
- Jinxin Zuo (Huazhong University of Science and Technology)